Auriol Z29962D Operation and Safety Notes

Z29962C

Z29962D

Radio-ContRolled

WeatheR Station

Operation and Safety Notes

RÁdiÓVeZÉRelt idŐJÁRÁSÁlloMÁS

Kezelési és biztonsági utalások

BeZdRÁtoV Á

MeteoRoloGiCKÁ St aniCe

Pokyny pro obsluhu a bezpečnostní pokyny

St aCJa Meteo

SteRoW ana RadioWo

Wskazówki dotyczące obsługi i bezpieczeństwa

dalJinSKa-VReMenSKa poStaJa

Navodila za upravljanje in varnostna opozorila

BeZdRÔtoV Á

MeteoRoloGiCKÁ St aniCa

Pokyny pre obsluhu a bezpečnostné pokyny

4

FUnK-WetteRStation

Bedienungs- und Sicherheitshinweise

GB Operation and Safety Notes Page 6

PL Wskazówki dotyczące obsługi

i bezpieczeństwa Strona 26

HU Kezelési és biztonsági utalások Oldal 49

SI Navodila za upravljanje in

varnostna opozorila Stran 70

CZ Pokyny pro obsluhu a

bezpečnostní pokyny Strana 89

SK Pokyny pre obsluhu a

bezpečnostné pokyny Strana 109

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 129

3

TENDENCY

%

COMFORT

IN

OUT

O

C

O

C

DAY D M

s

MAX

MIN

MAX

MIN

YEAR

PM

A

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

Z29962C / Z29962D

4

B

20

21

22

2324

5

C

25

26

27

2829

6 GB

Proper Use........................................................Page 7

Description of parts ...................................... Page 7

Technical Data .................................................Page 8

Scope of Supply ............................................. Page 9

Safety

General Safety Information ............................Page 10

Safety Instructions for Batteries .......................Page 10

Before Initial Use

General information ........................................ Page 12

Setting up the external sensor .........................Page 13

Setting up the weather station ........................Page 13

Mounting the product on a wall .............Page 14

Weather station ............................................... Page 15

External sensor .................................................Page 15

Setting up the weather station ................ Page 15

Operation

Setting the time / date manually .....................Page 16

Displaying DST summertime ............................Page 16

Setting the alarm ..............................................Page 17

Switching the alarm on / off ............................ Page 17

Using the snooze function ...............................Page 18

Temperature display ........................................Page 18

Humidity display ..............................................Page 18

Setting up the weather forecast function ........Page 18

Weather trend .................................................Page 19

Setting the memory function for

minimum / maximum levels ..............................Page 20

Displaying the maximum / minimum levels ..... Page 20

Using 12- / 24-hour format ............................. Page 21

Selecting the language ...................................Page 21

Setting the time zone .......................................Page 22

Changing the batteries ....................................Page 22

Troubleshooting .............................................Page 23

Cleaning and Maintenance .......................Page 23

Disposal .............................................................Page 24

Declaration of Conformity ......................... Page 25

7 GB

Radio-controlled weather station

Q

Proper Use

The weather station displays the indoor and outdoor

temperature in Celsius (°C) or Fahrenheit (°F), the

indoor relative humidity in % RH and their maximum

and minimum levels. The weather station also displays

a weather forecast, the time in 12/24-hour format

and the date. It is also equipped with an alarm and

calendar function. The device is not intended for

commercial use.

Q

Description of parts

Weather station

1

Weather icon

2

Comfort indicator

3

Humidity (% RH) (indoor)

4

MAX display for indoor / outdoor temperature

5

Indoor temperature

6

MIN display for indoor / outdoor temperature

7

Outdoor temperature

8

Date (Day / Month)

9

Time

10

Z

/ REGISTER button

11

MEMORY button

12

ADJUST button (for settings)

13

ALARM button

14

CLOCK button

15

-Icon

16

s

-Icon (DST / summertime)

17

YEAR / DAY display

18

MAX / MIN display for humidity

19

Weather trend

8 GB

20

Hanger

21

Battery compartment

22

Stand

23

Dowel (ø 7 mm)

24

Screw (ø 4.5 mm)

External sensor

25

Indicator LED

26

Hanger

27

Battery compartment

28

Dowel (ø 5 mm)

29

Screw (ø 3 mm)

Q

Technical Data

Weather station:

Indoor temperature

measuring range: 0 – + 49.9 °C

+ 32 – + 122 °F

The value LL.L appears in the LC display at an

internal temperature of ≤ – 10 °C (14 °F).

The value HH.H appears in the LC display at an

internal temperature of ≥ 50 °C (122 °F).

Temperature

resolution: 0.1 °C

Measuring range

humidity: 30 – 95 %

Resolution

humidity: 1 %

Radio signal: DCF

Battery: 2 x AA 1.5 V

(included in

delivery scope)

9 GB

External sensor:

Temperature

measuring range: – 20 – + 60 °C

– 4 – + 140 °F

The value LL.L appears in the LC display at an

external temperature of ≤ –50 °C (– 58 °F).

The value HH.H appears in the LC display at an

external temperature of ≥ 70 °C (158 °F).

HF transmission

signal: 433 MHz

HF transmission

range: max. 30 metres in open space

Battery: 2 x AA 1.5 V

(included in

delivery scope)

Q

Scope of Supply

Please check the supplied items immediately after

unpacking the device to ensure that there is nothing

missing and that the product and all of its parts are

in perfect condition.

1 x radio-controlled weather station

1 x external sensor

1 x stand (weather station)

4 x battery AA 1.5 V

2 x dowels (ø 7 mm, ø 5 mm)

2 x screws (ø 4.5 mm, ø 3 mm)

1 x operating manual

10 GB

Safety

YOU SHOULD STORE ALL SAFETY INFORMATION

AND INSTRUCTIONS IN A SAFE PLACE IN CASE

YOU NEED TO REFER TO THEM AGAIN IN THE

FUTURE!

General Safety

Information

WARNING!

DANGER TO LIFE! Batteries

can be swallowed, which may represent a danger

to life. If a battery has been swallowed, medical

help is required immediately.

J Children or persons who lack the knowledge or

experience to use the device or whose physical,

sensory or intellectual capacities are limited must

never be allowed to use the device without su-

pervision or instruction by a person responsible

for their safety. Children must never be allowed

to play with the device.

J Please note that the guarantee does not cover

damage caused by incorrect handling, non-

compliance with the operating instructions or

interference with the device by unauthorised

individuals.

Safety Instructions

for Batteries

J Remove the batteries from the device if they are

not going to be used for a prolonged period.

11 GB

J CAUTION! DANGER OF EXPLO-

SION! The batteries must never be

recharged!

J When inserting the batteries, ensure the correct

polarity! This is shown in the battery compart-

ments.

J If necessary, clean the batteries and device

contacts before inserting the batteries.

J Remove spent batteries immediately from the

device. There is an increased danger of leaks!

J Batteries must not be disposed of in the normal

domestic waste!

J Every consumer is legally obliged to dispose of

batteries in the proper manner!

J Keep batteries away from children; do not throw

batteries in the ﬁre, short-circuit batteries or take

them apart.

J Always replace all the batteries at once.

J

CAUTION! DANGER OF EXPLO-

SION! Use batteries of the same

type only.

J If the above instructions are not complied with,

the batteries may discharge themselves beyond

their end voltage. There is a danger of leaking.

If the batteries have leaked inside your device,

you should remove them immediately in order

to prevent damage to the device!

J Avoid contact with the skin, eyes and mucous

membranes. Any parts of the body coming into

contact with battery acid should be rinsed oﬀ

with copious amounts of water and / or a doctor

contacted if necessary!

12 GB

Q

Before Initial Use

Q

General information

m CAUTION! When choosing where to position

the weather station, make sure that it is not

exposed to direct sunlight, vibrations, dust, heat,

cold or moisture. Do not place the weather

station or external sensor near to heat sources,

e.g. radiators, as this may result in damage to

the instruments.

j Do not place the devices near sources of inter-

ference such as television sets, computers, thick

walls, thermopane windows etc. Otherwise the

transmission of radio waves between the devices

may be impaired.

j Please ensure that neighbouring devices are not

operated at the same frequency of 433 MHz.

Such devices may cause interference to the

radio connection.

j Do not place the devices next to or on metal

plates. Otherwise the quality of radio wave

transmission may be reduced.

Radio signal (DCF):

The DCF signal (time signal transmitter) is made up

of time pulses transmitted from one of the highest

precision clocks in the world close to Frankfurt / Main

in Germany - it varies by 1 second in 1 million years.

In ideal conditions, your weather station can pick

up this signal over a distance of up to approx.

1,500 km around Frankfurt / Main.

13 GB

Q

Setting up the external sensor

Inserting the batteries:

j Remove the battery compartment cover from

the back of the external sensor.

j Insert two 1.5 V

batteries (AA) (included) in

the battery compartment

27

.

Note: make sure that the polarity is correct. This

is indicated inside the battery compartment

27

(see Fig. C).

– The external sensor is now ready for operation

and the indicator LED

25

will ﬂash.

j Close the battery compartment cover.

Q

Setting up the weather station

Inserting the batteries:

j Open the battery compartment cover on the

back of the weather station.

j Place two 1.5 V

batteries (AA) (included) in

the battery compartment

21

.

Note: take care that the polarity is correct. This

is indicated inside the battery compartment

21

(see Fig. B).

j Close the battery compartment cover.

As soon as the batteries have been inserted, the

LCD indicates the indoor temperature

5

and the

humidity

3

. The weather station starts to receive

the signal from the external sensor. When it has

successfully received the external sensor signal, the

outdoor temperature

7

appears on the LCD after

around 1 minute.

Note: do not alter the position of the weather station

when it is picking up the signal, as this can interfere

with reception.

14 GB

The weather station starts to pick up the radio signal

after it has successfully received the external sensor

signal. This process can take up to 7 minutes and is

indicated on the LCD by the ﬂashing

icon

15

.

Once the DCF radio signal has been picked up

successfully, the

icon

15

is displayed constantly

on the LCD.

If synchronisation with the atomic clock is not possible

during setup, change the position of the weather

station (e.g. to next to a window).

j If the weather station does not work properly, you

can restart it by pressing the ADJUST button

12

.

Reception may be seriously restricted by certain

obstacles (e.g. concrete walls) or sources of inter-

ference (e.g. other electrical devices).

If interference with reception of the radio signal con-

tinues, you can also set the time and date manually

(see “Setting the time / date manually”).

Q

Mounting the product on a wall

Note: You will require an electric drill and a cross-

head screwdriver for this step.

m CAUTION! DANGER TO LIFE, RISK OF

INJURY AND MATERIAL DAMAGE! Read

the operating and safety instructions for your drill

carefully.

WARNING!

DANGER TO LIFE! Take care

that you do not hit electricity, gas or water lines when

you drill into the wall. If necessary, check with a pipe

and cable detector before drilling.

15 GB

Q

Weather station

j Mark the position of the hole (ø approx. 7 mm)

on the wall.

j Drill the hole with an electric drill.

j Insert the dowel

23

into the drilled hole.

j Using a crosshead screwdriver, screw the

screw

24

into the dowel

23

.

j Hang the weather station by placing the hanger

20

on the screw

24

.

Q

External sensor

j Mark the position of the hole (ø approx. 5 mm)

on the wall.

j Drill the hole with an electric drill.

j Insert the dowel

28

into the drilled hole.

j Using a crosshead screwdriver, screw the

screw

29

into the dowel

28

.

j Hang the external sensor by placing the

hanger

26

on the screw

29

.

Note: Choose a sheltered position for the external

sensor, not directly near the weather station (e.g.

separated by a wall). Ensure that the external sensor

does not come into contact with water or direct

sunlight. Electronic devices may adversely aﬀect

the wireless signal reception.

Q

Setting up the weather station

j Place the stand

22

on the underside of the

weather station.

16 GB

Q

Operation

Reception of the DCF radio signal may be disrupted

or interrupted at the location of the weather station.

In this case you are able to set the instrument

manually.

Q

Setting the time / date manually

1. Press and hold the CLOCK button

14

for approx.

3 seconds. The hours on the time display

9

begin to ﬂash.

2. Press the ADJUST button

12

to set the required

number.

Tip: keep the ADJUST button

12

pressed for

faster time setting. You can also use this option

for the subsequent settings.

If no button is pressed in the space of approx.

30 seconds, the LCD automatically returns to

the standard display.

3. Press the CLOCK button

14

to conﬁrm your

entry. The minutes on the time display

9

start

to ﬂash.

4. Repeat steps 2 and 3 to set the minutes, seconds,

year

17

and date

8

(month and day).

Note: the seconds display can only be reset

to 00.

5. The LCD returns to the standard display after

you have made the settings.

Q

Displaying DST summertime

Summertime is automatically displayed on the LCD

by the

s

icon

16

. The DCF radio signal indicates

to the clock whether or not it is summertime.

17 GB

Q

Setting the alarm

j Press and hold the ALARM button

13

for approx.

3 seconds.

Note: if you have already set an alarm, the

set alarm time is displayed on the LCD together

with AL. Otherwise 0:00 and AL are displayed.

j Press the ALARM button

13

brieﬂy. The hours

start to ﬂash.

j Press the ADJUST button

12

to set the required

number.

j Press the ALARM button

13

to conﬁrm your

entry. The minutes start to ﬂash.

j Press the ADJUST button

12

to set the required

number.

j Press the ALARM button,

13

to conﬁrm your

entry.

j The LCD returns to the standard display (Time

9

).

Q

Switching the alarm on / oﬀ

j Press and hold the ALARM button

13

for approx.

3 seconds. The set alarm time appears on the LCD.

j Press the ADJUST button

12

to switch the alarm

on or oﬀ.

Note: when the alarm is switched on,

is

displayed above AL.

Note: if no button is pressed within a space of

approx. 30 seconds, the LCD automatically

returns to the standard display.

j The alarm rings for approx. 2 minutes as soon as

the set alarm time is reached. The alarm signal

is switched oﬀ automatically after 2 minutes.

Press one of the buttons, MEMORY

11

,

ADJUST

12

, ALARM

13

or CLOCK

14

, to

switch the alarm signal oﬀ within this time.

Note: the alarm rings every day at the set time.

18 GB

Q

Using the snooze function

j Press the Z

Z

/ REGISTER button

10

when the

alarm is ringing to activate the snooze function.

j The alarm signal silences and the Z

Z

display

ﬂashes. The alarm signal sounds again after an

interval of 5 minutes.

Note: the alarm rings every day at the set time.

Q

Temperature display

The LCD indicates both the current indoor

5

and

outdoor temperature

7

.

j Press and hold the ADJUST button

12

for approx.

3 seconds. The °C display starts to ﬂash.

j Press the ADJUST button

12

to switch between

the °C and °F temperature scales.

j Press the MEMORY button

11

to conﬁrm your

entry.

Q

Humidity display

The current humidity

3

is displayed on the LCD.

The comfort indicator

2

divides the humidity into

three categories.

The displays have the following meaning:

WET = humidity

3

> 70 %

COMFORT = humidity

3

40 – 70 %,

DRY = humidity

3

< 40 %

Q

Setting up the weather

forecast function

Note: please also listen to the weather forecast from

your local weather service. If there are discrepancies

between the instrument and your local weather service,

please go by the local weather service forecast.

19 GB

j Press and hold the ADJUST button

12

for approx.

3 seconds. The °C or °F display starts to ﬂash.

j Press the CLOCK button

14

. The weather icon

1

starts to ﬂash.

j Press the ADJUST button

12

to set the current

weather conditions.

The following weather icons are available:

cloudy

partly cloudy

sunny

rainy

Note: please ensure that you set the current

weather conditions correctly; otherwise the dis-

played weather forecast will not be accurate.

j Press the MEMORY button

11

to conﬁrm your

entry.

Note: if no button is pressed in a space of

approx. 30 seconds, the LCD returns to the

standard display.

Q

Weather trend

The weather station has a weather trend display

19

.

The displays have the following meaning:

= the weather is deteriorating

= no change in the weather

20 GB

= the weather is improving

Q

Setting the memory function

for minimum / maximum levels

j Press and hold the ADJUST button

12

for approx.

3 seconds. Either the °C or °F display starts to

ﬂash.

j Press the CLOCK button

14

twice. - - starts to

ﬂash.

j Press the ADJUST button

12

to set the required

memory interval.

The following intervals are available:

- - = general minimum / maximum levels

1d = daily minimum / maximum levels

7d = weekly minimum / maximum levels

j Press the MEMORY button

11

to conﬁrm your

entry.

Note: if no button is pressed in a space of

approx. 30 seconds, the LCD returns to the

standard display.

Q

Displaying the maximum /

minimum levels

Note: depending on the memory interval setting,

the LCD displays either the general, daily or weekly

minimum / maximum levels.

j Press the MEMORY button

11

once to display

the maximum

4

and minimum

6

levels for

the indoor temperature (IN) and the maximum

levels for humidity

3

.

j Press the MEMORY button

11

again to display

the maximum

4

and minimum

6

levels for the

outdoor temperature (OUT) and the minimum

levels for the humidity

3

.

Stránka sa načítava ...

Auriol Z29962D Operation and Safety Notes

Táto príručka je tiež vhodná pre

Auriol Z29962D Operation and Safety Notes

V iných jazykoch

Súvisiace články

Ďalšie dokumenty