Auriol Z31055A Operation and Safety Notes

Z31055A

Z31055B

RADIO-CONTROLLED

WEATHER STATION

Operation and Safety Notes

RÁDIÓVEZÉRELT

IDŐJÁRÁSÁLLOMÁS

Kezelési és biztonsági utalások

BEZDRÁTOVÁ

METEOROLOGICKÁ STANICE

Pokyny pro obsluhu a bezpečnostní pokyny

FUNK-WETTERSTATION

Bedienungs- und Sicherheitshinweise

STACJA METEO

STEROWANA RADIOWO

Wskazówki dotyczące obsługi i

bezpieczeństwa

DALJINSKA-VREMENSKA

POSTAJA

Navodila za upravljanje in varnostna

opozorila

METEOSTANICA

Pokyny pre obsluhu a bezpečnostné pokyny

4

GB Operation and Safety Notes Page 6

PL Wskazówki dotyczące obsługi

i bezpieczeństwa Strona 25

HU Kezelési és biztonsági utalások Oldal 46

SI Navodila za upravljanje in

varnostna opozorila Stran 66

CZ Pokyny pro obsluhu a

bezpečnostní pokyny Strana 86

SK Pokyny pre obsluhu a

bezpečnostné pokyny Strana 104

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 123

3

A

1

2

3

4

5

7

8

9

10

12

11

13

14

15

17

16

6

4

21

22

CLOCK SELECT

ALARM

Z

/REGISTER

SET/RESET

B

C

x 1

x 1x 1

23

24

25

2627

18

19

20

5

WIRELESS SENSOR

AA 1.5 V

D

E

28

x 1

x 1x 1

x 4

29

30

3132

6 GB

Introduction

Proper use ......................................................Page 7

Description of parts and features .................Page 7

Technical data ...............................................Page 9

Safety ............................................................Page 9

General safety information ...........................Page 10

Safety instructions for batteries .....................Page 11

Before initial use

General information ......................................Page 12

Preparing to use the outdoor sensor ............Page 13

Preparing the weather station for use ..........Page 13

Weather station .............................................Page 15

External sensor ...............................................Page 15

Setting the language / time zone / time /

date manually ................................................Page 16

Displaying summer time ................................Page 18

Calling up the 2

nd

time zone .........................Page 18

Setting the alarm time ....................................Page 18

Calling up the alarm times ............................Page 19

Switching the alarm on / off ..........................Page 19

Using the snooze button ...............................Page 20

Displaying temperature .................................Page 20

Calling up the minimum / maximum values ...Page 20

Displaying temperature trends ......................Page 21

Battery state display ......................................Page 21

Replacing the batteries ..................................Page 22

Troubleshooting...................................Page 22

Cleaning and maintenance ........Page 22

Disposal ....................................................... Page 23

Declaration of conformity...........Page 24

7 GB

Radio-controlled weather station

Introduction

Keep these instructions in a safe place.

If you pass the product on to anyone

else, please ensure that you also pass

on all the documentation.

Proper use

The weather station displays the indoor and out-

door temperatures in Celsius (°C) or Fahrenheit

(°F) and their maximum and minimum values. The

weather station also displays the time in 12 / 24-

hour clock modes and the date. In addition, the

weather station has an alarm function. The device

is not intended for commercial use.

Description of parts

and features

LC display

1

Temperature trend (outdoor temperature)

2

Outdoor temperature

3

symbol (outdoor sensor)

4

MAX- / MIN display for indoor temperature

5

Temperature trend (indoor temperature)

6

Indoor temperature

7

symbol (weather station)

8

Time

9

Z

symbol (snooze function)

10

Seconds display

8 GB

11

symbol

12

Day of the week display

13

Date display (day / year)

14

DST display (summer time)

15

/ symbol (Alarm 1 / Alarm 2)

16

2

nd

time zone (ZONE)

17

MAX- / MIN display (outdoor temperature)

Weather station

18

Z

/ REGISTER button (snooze function /

REGISTER)

19

SELECT button

20

SET / RESET button

21

ALARM button

22

CLOCK button

23

Hanging slot

24

Battery compartment

25

Stand

26

Screw (ø 4.5 mm)

27

Dowel (ø 7 mm)

Outdoor sensor

28

Control LED

29

Hanging slot

30

Battery compartment

31

Screw (ø 3 mm)

32

Dowel (ø 6 mm)

9 GB

Technical data

Weather station:

Temperature

measurement range: 0 – + 50 °C

+32 – +122 °F

Note: If the temperature is ≤0 °C (32 °F), the

LCD display shows “LL.L”. If the temperature is

≥50 °C (122 °F), the LCD display shows “HH.H”.

Temperature interval: 0.1 °C

Radio signal: DCF

Batteries: 2 x AA 1.

5 V

(included)

Outdoor sensor:

Temperature

measurement range: –20 °C – +60 °C

–4 °F – +140 °F

Note: If the temperature is ≤–20 °C (–4 °F),

the LCD display shows “LL.L”. If the temperature is

≥60 °C (140 °F), the LCD display shows “HH.H”.

HF transmission signal: 433 MHz

HF transmission range: max. 30 metres over

open ground

Batteries: 2 x AA 1.

5 V

(included)

Safety

YOU SHOULD STORE ALL SAFETY INFORMA-

TION AND INSTRUC

TIONS IN A SAFE PLACE

IN CASE

YOU NEED TO REFER TO THEM

AGAIN IN THE FUTURE!

10 GB

General safety

information

DANGER TO

LIFE AND ACCIDENT HAZ-

ARD FOR

TODDLERS AND

SMALL CHIL

DREN! Never allow children

to play unsupervised with the packaging

material. There is a danger of suﬀocation

from the packaging material.

DANGER TO LIFE! Batteries

can be swallowed, which may represent a

danger to life. If a battery has been swal-

lowed, medical help is required immediately.

Children or persons who lack the knowledge

or experience to use the device or whose

physical, sensory or intellectual capacities are

limited must never be allowed to use the de-

vice without supervision or instruction by a

person responsible for their safety. Children

must never be allowed to play with the de-

vice. This is not a toy.

Do not use the device in hospitals or medical

facilities, as otherwise this may result in mal-

functions of life-support systems.

Do not expose the device to an extremely

high electromagnetic ﬁeld. This may impair the

correct functioning of the device.

Please note that the guarantee does not

cover damage caused by incorrect handling,

non-compliance with the operating instruc-

11 GB

tions or interference with the device by unau-

thorised individuals.

Safety instructions

for batteries

Remove the batteries from the device if they

are not going to be used for a prolonged

period.

CAUTION! DANGER OF EX-

PLOSION! Never recharge bat-

teries which are not rechargeable.

When inserting the batteries, ensure the correct

polarity! This is shown in the battery compart-

ments.

Remove spent batteries immediately from the

device. There is an increased danger of leaks!

Keep batteries away from children; do not

throw the batteries in the ﬁre, short-circuit

them or take them apart.

Always replace all the batteries at once.

Use batteries of the same type only. Other-

wise there is a risk of an explosion.

If the batteries have leaked inside your de-

vice, you should remove them immediately in

order to prevent damage to the device!

Avoid contact with the skin, eyes and mucous

membranes. Any parts of the body coming

into contact with battery acid should be

rinsed oﬀ with copious amounts of water

and / or a doctor contacted if necessary!

12 GB

Before initial use

General information

CAUTION! When choosing

where to position

the weather station,

make sure that it is not exposed

to direct sunlight, vibrations, dust, heat, cold or

moisture. Do not place the weather station or exter-

nal sensor near to heat sources, e.g. radiators, as

this may result in damage to the instruments.

Place the weather station on the accompany-

ing stand

25

.

Do not place the devices near sources of in-

terference such as television sets, computers,

thick walls, thermopane windows etc. Other-

wise the transmission of radio waves between

the devices may be impaired.

Please ensure that neighbouring devices are

not operated at the same frequency of

433 MHz. Such devices may cause interfer-

ence to the radio connection.

Do not place the devices next to or on metal

plates. Otherwise the quality of radio wave

transmission may be reduced.

Radio signal (DCF):

The DCF signal (time signal transmitter) is made

up of time pulses transmitted from one of the high-

est precision clocks in the world close to Frankfurt /

Main in Germany – it varies by 1 second in 1mil-

lion years.

In ideal conditions, your weather station can pick

up this signal over a distance of up to approx.

1,500 km around Frankfurt / Main.

13 GB

Preparing to use

the outdoor sensor

Inserting the batteries:

Remove the battery compartment cover from

the back of the outdoor sensor.

Insert two 1.

5 V

batteries (AA) (included)

into the battery compartment

30

.

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown in the

battery compartment.

The outdoor sensor is now ready for use and

the control LED

28

illuminates brieﬂy.

Close the battery compartment cover.

Preparing the weather station

for use

Inserting the batteries:

Open the battery compartment

24

on the

back of the weather station.

Insert two 1.

5 V

batteries (AA) (included)

into the battery compartment.

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown on

the battery compartment (see Figs. C + E).

Close the battery compartment cover.

Connecting the weather station with the

outdoor sensor and the DCF radio sig-

nal:

After the batteries have been inserted, the

weather station attempts to establish a connection

with the outdoor sensor. This process can take a

few minutes. The

symbol ﬂashes. Once the

14 GB

device has successfully connected to the external

sensor, the

symbol stops ﬂashing and the tem-

perature is shown in the LC display.

Note: If the weather station does not receive the

signal from the outdoor sensor within 3 minutes,

the weather station automatically starts with the

reception of the radio time signal.

After successful reception of the outdoor sensor

signal or after 3 minutes, the weather station starts

with the reception of the radio time signal. This

process can take up to 5 minutes and is indicated

in the LC display by the ﬂashing

symbol

11

.

After successful reception of the DCF radio signal,

the

symbol is displayed continuously in the

LC display.

Note: Do not move the weather station while it is

receiving the signal. Otherwise this could interfere

with reception.

If synchronisation is not possible when the

weather station is being ﬁrst set up, try changing

the location (e.g. place the weather station near

to a window).

If this does not work, carry out a restart, if

necessary. To do this, press and keep pressed

the Z

Z

/ REGISTER button

18

..

Reception may be considerably reduced by obstruc-

tions (e.g. concrete walls) or sources of interference

(e.g. other electrical devices).

15 GB

If the reception of the radio signal continues to be

interrupted, you can set the time and date manu-

ally (see “Setting the language / time zone / time /

date manually”).

Mounting the weather station and / or

the outdoor sensor on a wall:

Note: You will require an electric drill and a

crosshead screwdriver for this step.

CAUTION! DANGER TO LIFE, RISK OF

INJURY AND MATERIAL DAMAGE! Read

the operating and safety instructions for your drill

carefully.

DANGER TO LIFE! Take care

that you do not hit electricity, gas or water lines

when you drill into the wall. If necessary, check

with a pipe and cable detector before drilling.

Weather station

Mark the position of the hole (ø approx. 7mm)

on the wall.

Drill the hole with an electric drill.

Insert the dowel

27

into the drilled hole.

Using a crosshead screwdriver, screw the

screw

26

into the dowel.

Hang the weather station by placing the

hanger

23

on the screw.

External sensor

Mark the position of the hole (ø approx. 6 mm)

on the wall.

Drill the hole with an electric drill.

Insert the dowel

32

into the drilled hole.

16 GB

Using a crosshead screwdriver, screw the

screw

31

into the dowel.

Hang the external sensor by placing the

hanger

29

on the screw.

Note: Choose a sheltered position for the exter-

nal sensor, not directly near the weather station

(e.g. separated by a wall). Ensure that the external

sensor does not come into contact with water or

direct sunlight. Electronic devices may adversely

aﬀect the wireless signal reception.

Setting the language / time

zone / time / date manually

The reception of DCF radio signal where the

weather station has been positioned may become

degraded or interrupted. If this happens you can

set the device manually.

1. Press and hold down the CLOCK button

22

for about 3 seconds.

2. Press the SET / RESET button

20

to switch be-

tween the 12- and 24-hour clock display modes.

Tip: If you press and hold down the SET /

RESET button, you accelerate the process and

reach the desired value more quickly. This

quicker method can also be used for making

the following settings. If during a period of

30seconds no buttons are pressed, the LC

display returns automatically to the default

display.

17 GB

3. Press the CLOCK button to conﬁrm your set-

tings. The day of the week display

12

ﬂashes.

4. Press the SET / RESET button to set the desired

language: GE = German, FR = French,

SP = Spanish, IT = Italian, EN = English).

5. Press the CLOCK button to conﬁrm your set-

tings. The time zone display ﬂashes.

6. Press the SET / RESET button to set the desired

time zone for time zone 2 (–12 hours to

+12hours).

Note: Should you be in a country in which

the DCF signal can be received but the time

is diﬀerent to your current local time, you can

use the time zone setting to have the clock

display your current local time. If you ﬁnd

yourself in a country in which, for example,

the local time is an hour ahead of Central

European Time (CET), you set the time zone

to +01. The clock is now still controlled by

DCF but shows the time as one hour ahead

of CET. If you wish to know what the time is in

the USA for example, then simply by setting

the time zone value to e.g. –10 you will ob-

tain the current local time in Los Angeles etc.

7. Press the CLOCK button to conﬁrm your settings.

The hour display ﬂashes.

8. Press the SET / RESET button to set the desired

value.

9. Press the CLOCK button to conﬁrm your settings.

10. Repeat steps 6 and 7 to set the values for,

minutes, seconds

10

, year and date

13

(month /

day).

18 GB

Note: The seconds display can only be

reset to 00.

11. After this, the LC display returns to the default

display.

Displaying summer time

Summer time is indicated by the DST symbol

14

in the LC display. The weather station automati-

cally detects from the DCF radio signal whether it

is summer time or not.

Calling up the 2

nd

time zone

The default display shows the time zone according

to the information provided by the DCF signal.

Press the CLOCK button

22

. The 2nd time

zone

16

appears in the LC display.

Press the CLOCK button again to return to the

default display.

Setting the alarm time

You can set two diﬀerent alarm times.

1. Press and hold down the ALARM button

21

for about 3 seconds.

Note: If an alarm time has been set before,

then that previously set alarm time appears in

the LC display. If not, then the display shows

0:00 or 12:00.

2. The hour display ﬂashes. Press the SET /

RESET button

20

to set the desired value.

3. Press the ALARM button to conﬁrm your

settings. The minute display ﬂashes.

19 GB

4. Press the SET / RESET button to set the desired

value.

5. Press the ALARM button to conﬁrm your

settings.

6. Repeat steps 2 to 5 to set the time for Alarm 2.

Calling up the alarm times

Press ALARM button

21

once or twice to

call up the set time for Alarm 1 or Alarm 2

respectively.

Press the ALARM button again to return to the

default display.

Switching the alarm on / oﬀ

Press the SET / RESET button

20

once to acti-

vate Alarm 1. Press the SET / RESET button

twice to activate Alarm 2. Press the SET /

RESET button three times to activate Alarm1

and Alarm 2.

Note: The symbol

or appears in the

LC display.

The alarm signal sounds as soon as the set

alarm time is reached. The alarm signal ceases

automatically after a period of 2minutes.

Press the ALARM button

21

to switch oﬀ the

alarm signal before it switches oﬀ automati-

cally.

Note: The alarm signal sounds every day at

the set time.

Press the SET / RESET button three times to

deactivate Alarm 1. Press the SET / RESET

button twice to deactivate Alarm 2. Press the

20 GB

SET / RESET button once to deactivate Alarm

1 and Alarm 2.

Using the snooze button

Press the Z

Z

/ REGISTER button

18

while the

alarm signal is sounding to activate the snooze

function.

The alarm signal is silenced and the displays

or and Z

Z

ﬂash.

The alarm signal sounds again after approx.

5 minutes.

Press the SELECT button

19

to deactivate the

snooze function.

Displaying temperature

The LC display shows the indoor temperature

6

and the outdoor temperature

2

.

Press and hold down the SELECT button

19

for approx. 3 seconds. The °C display

ﬂashes.

Press the SET / RESET button

20

to switch be-

tween the °C (Celsius) and °F (Fahrenheit)

temperature scales.

Press the SELECT button to conﬁrm your

settings.

Calling up the minimum /

maximum values

The weather station stores the maximum and mini-

mum values of the outdoor sensor and of the

weather station itself.

Stránka sa načítava...

Auriol Z31055A Operation and Safety Notes

Tento návod je vhodný aj pre

Auriol Z31055A Operation and Safety Notes

v iných jazykoch

Súvisiace články

Ostatné dokumenty