Not for
Reproduction
BRIGGS & STRATTON CORPORATION
MILWAUKEE, WISCONSIN, U.S.A.
Manual No. 80019641 Rev A
Copyright © 2017. Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.
en - English
ar -
da - Dansk
es - Español
fi - Suomi
fr - Français
hu - Magyar
nl - Nederlands
no - Norsk
pl - Polski
ru -
sv - Svenska
sw - Kiswahili
020622-00 &
020672-00
(BPW1800)
Not for
Reproduction
2 BRIGGSandSTRATTON.COM
A
B
C
2
A
B
B
A
1
3
B
A
B
A
C
5
A
B
C
6
B
A
C
7
B
A
C
9
D
8
10
A
B
Not for
Reproduction
3
A
B
M
D
J
F
K
C L
H
4
E
G
Not for
Reproduction
4 BRIGGSandSTRATTON.COM
Safety and Control Symbols ................... 4
Equipment Description........................ 4
Assembly................................... 5
Features and Controls ........................ 5
Operation................................... 5
Maintenance ................................ 6
Storage ....................................6
Troubleshooting..............................7
Specifications ............................... 7
Warranty ................................... 9
A safety symbol may be used to represent the type of
hazard. WARNING indicates a hazard which, if not avoided,
could result in death or serious injury. NOTICE address
practices not related to personal injury.
This machine is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless supervised
and given instruction concerning safe operation
and understanding of hazards involved.
WARNING
• This machine has been designed for use with
the cleaning agent supplied or recommended
by the manufacturer. The use of other cleaning
agents or chemicals may adversely affect the
safety of the machine.
• High pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons,
live electrical equipment or the machine itself.
• Do not use the machine within range of persons
unless they wear protective clothing.
• Do not direct the jet against yourself or others
in order to clean clothes or foot-wear.
• Risk of explosion – Do not spray flammable liquids.
• High pressure cleaners shall not be used by
children or untrained personnel.
• High pressure hoses, fittings and couplings
are important for the safety of the machine.
Use only hoses, fittings and couplings
recommended by the manufacturer.
• To ensure machine safety, use only original
spare parts from the manufacturer or approved
by the manufacturer
• Water that has flown through backflow
preventers is considered to be non-potable.
• Remove plug from outlet to disconnect power during
cleaning or maintenance and when replacing parts
• Do not use the machine if the cord or important
parts of the machine are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
• Do not use an extension cord with this electric
pressure washer.
• Always switch off the master switch when
leaving the machine unattended.
This electric pressure washer operates at a maximum of 12.0 MPa
(120 BAR or 1,740 PSI (pounds square inch)) at a flow rate of up
to 8.0 LPM (liters per minute)(2.1 GPM (gallons per minute)).
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter, or otherwise improve the product
and this document at any time without prior notice.
NOTICE If you have questions about intended use, ask
dealer or contact qualified service center. NEVER operate
units with broken or missing parts, or without protective
housing or covers. DO NOT by-pass any safety device
on this machine. DO NOT modify pressure washer in any
way. This equipment is designed to be used with Briggs &
Stratton authorized parts ONLY.
This pressure washer is provided with a portable residual
current device (PRCD) built into the plug of the power supply
cord. This device provides additional protection from the risk
of electric shock. The PRCD provides 10 mA of protection.
Never spray yourself, others, animals, power
sources, or the unit itself.
Fire
On
Chemical Burn
Electrical Shock
Fall Flying Objects
Fluid Injection
Off
Read Manual
Non-Potable Water
Safety Alert
Not for
Reproduction
5
A sensor will shut off the motor when the spray gun trigger
releases or locks. If the motor continues to run while the spray
gun trigger is released or locked, DO NOT USE THE MACHINE.
Contact a Briggs & Stratton authorized service dealer.
NOTICE ON/OFF switch should always be in the OFF
position (0) when pressure washer is not in use.
An overload protection device automatically shuts off the
motor if it overheats or draws excessive current. If the
device trips, disconnect power by pressing master ON/OFF
switch to OFF (0) position. Let unit cool for 30 minutes and
press ON/OFF switch to ON (I) position.
EU Disposal
This symbol indicates the owner of batteries and
electrical or electronic equipment shall not dispose
of this product with unsorted municipal waste. This
product should be disposed of in environmentally
appropriate waste locations. Please contact Briggs & Stratton
or your local retailer for additional disposal information.
Assembly
Figure
1
2
3
1. Slide supports (1,A) into slots. Align and attach with
screws (1,B). Maintain alignment while tightening.
2. Place handle (2,A) onto supports and align holes.
3. Insert carriage bolts (2,B) through holes from inside of
unit, attach with plastic knobs (2,C), and tighten.
4. Attach nozzle holder (3,A) with screw (3,B) to back,
left side of handle.
Figure
4
Figure
4
5
6
NOTICE Use ONLY cold water (less than 38°C (100°F)).
1. Pressing red button on gun (5,A), insert high pressure
hose (5,B) into gun (4,A) until it snaps in place.
2. Attach high pressure hose (4,K) to outlet (4,L) and tighten.
3. Confirm water inlet screen and black rubber washer is
installed in water inlet coupling (6,A).
4. Attach water inlet coupling to water inlet (6,B) and tighten.
NOTICE Make sure water source is capable of supplying water
at a flow rate greater than 11.4 LPM (3.0 GPM) and 0.14-0.55
MPa (1.4-5.5 BAR or 20-80 PSI) at end of garden hose.
5. Run water through garden hose to clean out debris.
NOTICE Using a backflow preventer at pump inlet could
cause pump damage. There MUST be at least 3 m. (10 ft.)
of unrestricted garden hose between pressure washer inlet
and backflow preventer.
WARNING! Water that has flowed through a
backflow preventer is considered to be non-potable.
6. Connect garden hose (6,C) (not to exceed 15 m (50 ft.))
to water inlet (4,J) and tighten.
7. Turn ON water, point gun in a safe direction, press trigger lock
button (5,C), then squeeze trigger to purge system of air.
8. Insert wand (4,E) into spray gun (4,A), apply inward pressure,
and twist wand 1/4 turn clockwise until securely in place.
9. Insert spray tip (4,M) into wand (4,E), applying inward
pressure until it SNAPS into place.
4
7
8
WARNING! Spray could splash back or propel objects
resulting in serious injury. Always wear indirect vented
(chemical splash) safety goggles marked to comply with
ANSI Z87.1 when using or in vicinity of this equipment.
1. Press master ON/OFF switch (4,D) to OFF (0) position.
WARNING! Risk of electrocution. Use of an extension
cord could cause electric shock or burn resulting in
death or serious injury. DO NOT use an extension cord
with this electric pressure washer. Your home’s electrical circuit
receptacle or extension cord may not provide lifesaving portable
residual current device (PRCD) protection.
2. Plug electrical power cord (4,G) into a dedicated
electrical circuit (8) rated for 220-240 volts AC at 10
Amps that is properly insalled in accordance with all local
codes and ordinances. Circuit is not to supply any other
electrical needs.
3. Press RESET button (7,C). Indicator light (7,B) should
be ON.
NOTICE Indicator light must be ON for the electric
pressure washer to operate.
4. Press TEST button (7,A). Indicator light (7,B) should
be OFF.
5. Press RESET button (7,C). Indicator light (7,B) should
be ON.
WARNING!
Risk of electrocution. Non-operating PRCD
could result in death or bodily injury. If indicator light does
not stay ON after test and reset, do not use PRCD.
6. Press master ON/OFF switch to ON (I) position.
7. Point gun in a safe direction, press trigger lock button
and squeeze trigger.
The motor will start and stop as spray gun trigger is depressed
and released.
Spray Tips
The turbo spray tip whirls a powerful pin-point jet of water
for intense cleaning. The white spray tip is for general soap
applications, and the yellow spray tip is for various high
pressure applications.
Usage Tips
• For most effective cleaning, keep spray tip from
20 to 61 cm. (8 to 24 in.) away from cleaning surface.
• If you get spray tip too close, especially using a
yellow spray tip, you may damage cleaning surface.
• DO NOT get closer than 15 cm (6 in.) when cleaning tires.
A Spray Gun G Electric Cord w/ PRCD
B Accessory Tray H Identification Label
C Detergent Tank J Water Supply Inlet
D Master ON/OFF Switch K High Pressure Hose
E Plastic Wand L High Pressure Outlet
F Spray Tips M Turbo Spray Tip
Not for
Reproduction
6 BRIGGSandSTRATTON.COM
Figure
4
WARNING! Chemicals could cause burns resulting
in death or serious injury. DO NOT use caustic liquid
with pressure washer. Use ONLY pressure washer
safe detergents /soaps. Follow manufacturers instructions.
1. Remove cap from detergent tank (C) and fill with
detergent solution. Replace cap.
2. Install white spray tip.
NOTICE Detergent cannot be applied with turbo or
yellow degree spray tip.
3. Apply detergent to a dry surface, starting at lower
portion of area to be washed and work upward, using
long, even, overlapping strokes.
4. Allow detergent to “soak in” per detergent manufacturer’s
instructions before washing and rinsing.
Pressure Washer Rinsing
1. Remove white spray tip from wand and install yellow spray tip.
WARNING! Kickback from spray gun could cause
you to fall resulting in death or serious injury.
Operate pressure washer from a stable surface. Be
extremely careful if you must use the pressure washer from
a ladder, scaffolding, or any other similar location. Firmly
grasp spray gun with both hands when using high pressure
spray to avoid injury when spray gun kicks back.
2. Apply a high pressure spray to a small area and check
surface for damage. If no damage is found, continue rinsing.
3. Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
Figure
1. Release spray gun trigger.
2. Press master ON/OFF switch (D) to OFF (0) position.
NOTICE Releasing the trigger will shut off the motor but
does not shut off electrical power to the unit.
3. Turn off water supply.
4. ALWAYS point spray gun in a safe direction, press
trigger lock button, and squeeze trigger to relieve built
up pressure in the unit.
WARNING! The high pressure stream of water that
this equipment produces could cut through skin and its
underlying tissues, resulting in serious injury and
possible amputation. Keep high pressure hose connected to
pump and spray gun while system is pressurized. DO NOT allow
CHILDREN to play with or operate pressure washer. ALWAYS
point spray gun in safe direction, squeeze spray gun trigger to
release high pressure, every time you turn off pressure washer.
5. Disconnect PRCD plug (G) from outlet and coil power
cord on bottom hook of accessory tray.
6. Wrap high pressure hose on top hook of accessory tray.
7. Store spray gun, wand and spray tips on accessory tray.
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and “freeze”
pump action. Follow these procedures after every use:
1. Run pressure washer with white spray tip until tank is empty.
2. Add 0.5 liter (0.5 quart) of water to detergent tank, and
run with white spray tip. Flush one to two minutes.
3. Press master ON/OFF switch to OFF (0) position.
Remove power cord plug from electrical outlet.
4. Turn off water supply. Point gun in a safe direction,
press trigger lock button, and squeeze trigger to
relieve trapped pressure.
5. Disconnect garden hose from water inlet. Disconnect
high pressure hose from gun and high pressure outlet.
6. Drain water from hose and spray gun, wipe off all
exterior surfaces.
7. Drain water from pump by tipping unit onto its right
side (water inlet facing down) for two minutes. Flip
unit over and let rest on high pressure outlet for an
additional two minutes.
8. Wrap high pressure hose on top hook of accessory tray.
9. Coil power cord around bottom hook of accessory tray.
Store spray gun and plastic wand on accessory tray.
Store spray tips in holder.
10. Store unit in a clean, dry area.
11. If storing for more than 30 days, see Storage.
4
Not for
Reproduction
7
Regular electric maintenance will improve performance
and extend the life of the pressure washer. See any
Briggs & Stratton Authorized Service Dealer for service. DO
NOT allow children to clean or maintain without supervision.
The electric pressure washer’s warranty does not cover
items that have been subjected to operator abuse or
negligence. To receive full value from warranty, operator
must maintain pressure washer as instructed in this
manual, including proper storage as detailed in Storage.
WARNING! To ensure machine safety, use only original
spare parts from the manufacturer or approved by the
manufacturer. Should you have questions about
replacing components on your pressure washer, please visit our
website at BRIGGSandSTRATTON.COM. If cord is damaged,
see an Briggs & Stratton Authorized Service Dealer.
Figure
4
Clean clogged spray tip to correct excessive pump pressure:
1. Press master ON/OFF switch to OFF (0) position.
Remove power cord plug from electrical outlet.
2. Remove spray tip from end of plastic wand (E).
3. Use a small paper clip to free foreign material clogging
or restricting spray tip.
4. Reinstall spray tip into plastic wand.
Figure
9
The use of lubricant (petroleum or synthetic grease) helps
seat o-rings providing an improved seal. Apply lubricant
to o-rings prior to assembling high pressure hose (pump
end) (A), high pressure hose (gun end) (B), garden hose
to the pump (C), and plastic wand (gun end) (D).
Purchase an O-Ring Maintenance Kit by contacting a Briggs
& Stratton Authorized Service Dealer. NEVER repair leaking
connections with sealant of any kind. Replace o-ring or seal.
Figure
10
WARNING! To reduce the risk of fire, replace
only with 13-amp BS 1362 rated fuse.
If equipped with fuse within PRCD:
1. Locate fuse on pin side of PRCD plug.
2. Using a flat-head screwdriver, remove cover (A) and
fuse. Remove fuse (B) from cover. Replace fuse with
13-amp BS 1362 rated fuse.
3. Insert cover and fuse.
Follow steps 1-10 in After Each Use.
NOTICE Water left in pump could freeze and permanently
damage pump. Freeze damage is not covered under warranty.
To protect the pump from damage caused by mineral
deposits or freezing, use PumpSaver to prevent freeze
damage, and lubricate pistons and seals.
NOTICE Failure to protect unit from freezing termperatures
will damage pump and render unit inoperable. Freeze
damage is not covered under warranty.
1. Wrap high pressure hose on top hook of accessory tray.
2. Coil power cord on bottom hook of accessory tray.
3. Store spray gun and plastic wand on accessory tray.
Store spray tips in holder.
4. Cover unit with a suitable protective cover that does not
retain moisture and store in a clean, dry area protected
from freezing temperatures.
Not for
Reproduction
8 BRIGGSandSTRATTON.COM
Problem Cause
Pump has following
1. Water inlet is blocked.
2. Inadequate water supply.
3. Garden hose is kinked or leaking.
4. Clogged water inlet screen.
5. Spray tip is obstructed.
1. Clear inlet.
2. Provide adequate water flow.
3. Straighten garden hose or replace if leaking.
4. Clean or replace water inlet screen.
5. Clean spray tip.
1. Water supply is not turned on.
2. Unit is not turned on.
3. Garden hose is too long.
4. Fuse blown or circuit breaker tripped.
1. Turn on water supply.
2. Press master ON/OFF switch to ON (I)
position. Reset PRCD.
3. Use only 15.24 m (50 ft.) maximum
garden hose.
4. a.) Replace fuse or reset circuit breaker.
b.) Disconnect other electrical
appliances and turn off lights in the
circuit or operate on dedicated circuit.
c.) Run 5 minutes with turbo spray tip.
spray.
1. High pressure spray tip is installed. 1. Install white spray tip.
1. Garden hose loose to water inlet.
2. Loose high pressure hose connections.
3. Damaged o-ring.
1. Hand tighten garden hose.
2. Remove hose and reinstall.
3. Replace o-ring.
Allowable Pressure MPa/BAR/PSI 16.0/160/2,320
*
Max Flow LPM/GPM 8.0/2.1
*
Rated Pressure and Flow MPa/BAR/PSI @ LPM/GPM 12.0/120/1,740 @ 5.5/1.45
Max Water Supply Temperature °C/°F 38/100
Rated Voltage V 220 - 240
Rated Frequency
Hz
50/60
Power Consumption
W
2,500
Current A 9.0
Protection Class Class Class II
Protection Degree
IP xx IPX5
Hand - Arm Vibration a
hd
Uncertainty K
m/s
2
m/s
2
*
0.2
*
Sound Pressure Level L
pA
Uncertainty K
pA
dB(A)
dB(A)
74
*
2
*
Measured Sound Power Level L
WA
dB(A) 94
*
Guaranteed Sound Power Level L
WAd
dB(A) 96
*
*
Per EN 60335-2-79: 2012.
Not for
Reproduction
9
Lavorwash spa
Via J.F.Kennedy, 12 – 46020 Pegognaga (MN) – Italy
This Declaration of Conformity is issued under the sole responsibility of the manufacturer. This is to certify that the products
listed in this document are in conformity with the relevant Union harmonization legislation and can carry the CE mark.
These models comply with the following Directives and related Standards.
High Pressure Cleaner
BPW1800
2006/42/EC (+2009/127/EC) EN 60335-1:2012
2006/95/EC EN 60335-2-79:2012
2004/108/EC EN 62233:2008
2000/14/EC (+2005/88/EC) EN 55014-1:2006+A1:2009+A2:2011
2011/65/EU (+2015/863/EU) EN 55014-2:1997+A1:2001+A2:2008
EN 50581:2012
Sound Power Level
Measured dB(A): 94
Guaranteed dB(A): 96
2000/14/EC: The appliance is defined by No. 27 of Annex I. Conformity evaluation procedure in accordance with Annex V.
The technical file is stored in Lavorwash spa, via J.F.Kennedy, 12 - 46020 Pegognaga (MN) – Italy.
Lavorwash S.p.A
via J.F.Kennedy, 12
46020 Pegognaga Giancarlo Lanfredi
(MN) - Italy Pegognaga, October 15, 2015 General Manager
Not for
Reproduction
10 BRIGGSandSTRATTON.COM
80011059_EN Rev -
BRIGGS & STRATTON PRODUCTS WARRANTY POLICY January 2014
LIMITED WARRANTY
Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship
or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for
and is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM. The purchaser must contact the Authorized Service Dealer, and then make the product available to the Authorized Service Dealer for
inspection and testing.
.
Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state or country to country.**
WARRANTY PERIOD
** In Australia - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM, or by calling 1300 274 447, or by emailing or writing to [email protected], Briggs & Stratton Australia Pty Ltd, 1
Moorebank Avenue, NSW, Australia, 2170.
The warranty period begins on the date of purchase by the first retail or commercial consumer. “Consumer use” means personal residential household use by a retail
consumer. “Commercial use” means all other uses, including use for commercial, income producing or rental purposes. Once a product has experienced commercial use,
it shall thereafter be considered as a commercial use product for purposes of this warranty.
To ensure prompt and complete warranty coverage, register your product at the website shown above or at www.onlineproductregistration.com, or mail the complete
registration card (if provided), or call 1-800-743-4115 (in USA).
Save your proof of purchase receipt. If you do not provide proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the
product will be used to determine the warranty period. Product registration is not required to obtain warranty service on Briggs & Stratton products.
ABOUT YOUR WARRANTY
Warranty service is available only through Briggs & Stratton Authorized Service Dealers. Most warranty repairs are handled routinely, but sometimes requests for warranty
service may not be appropriate. This warranty covers only defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper
maintenance or repair, normal wear and tear, or stale or unapproved fuel.
Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual. Using the product in a way not described in the Operator’s
Manual or using the product after it has been damaged will not be covered under this warranty. Warranty coverage will also not be provided if the serial number on the
product has been removed or the product has been altered or modified in any way, or if the product has evidence of abuse such as impact damage or water/chemical
corrosion damage.
- This product must be maintained according to the procedures and schedules provided in the Operator’s Manual, and serviced or
repaired using genuine Briggs & Stratton parts or equivalent. Damage caused by lack of maintenance or use of non-original parts is not covered by warranty.
Normal Wear and Tear - Like most mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not cover repairs when normal
use has exhausted the life of a part or the equipment. Maintenance and wear items such as filters, belts, cutting blades, and brake pads (except engine brake pads) are
not covered by warranty due to wear characteristics alone, unless the cause is due to defects in material or workmanship.
- In order to function correctly, this product requires fresh fuel that conforms to the criteria specified in the Operator’s Manual. Engine or
equipment damage caused by stale fuel or the use of unapproved fuels (such as E15 or E85 ethanol blends) is not covered by warranty.
This warranty excludes damage due to accident, abuse, modifications, alterations, improper servicing, freezing or chemical deterioration.
Attachments or accessories that were not originally packaged with the product are also excluded. There is no warranty coverage on equipment used for primary power in
place of utility power or on equipment used in life support applications. This warranty does not include used, reconditioned, second-hand, or demonstration equipment or
engines. This warranty also excludes failures due to acts of God and other force majeure events beyond the manufacturer’s control.
Consumer Use Commercial Use
12 months None
Not for
Reproduction
5 BRIGGSandSTRATTON.COM
•
•
•
•
•
•
•
•
•
•
•
6.
5.
4.
10038°
A,5 1
A,4B,5)
L,4K,4 2
A,6 3
.(C,6B,6)
C,6 4
3.011.4
20-80)
5
103
D,6 6
J,450
15
,(C,5 7
A,4E,4 8
(E,4)(M,4) 9
8.
7.
4.
ANSI Z87.1
. OFF (0)D,4ON/OFF 1
.(PRCD
230G,4 2
13
B,7RESET(7,A) 3
B,7TEST (7,A) 4
B,7RESET(7,A) 5
PRCD
.PRCD
.ON (I)D,3ON/OFF 6
7
4.
2486120
615 •
4.
C 1
2
3
4
4.
E 1
Not for
Reproduction
4 BRIGGSandSTRATTON.COM
4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. . . . . . . . . . . . . . . . . . . . . . . . . . .
4. . . . . . . . . . . . . . . . . . . . . . . . .
4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. . . . . . . . . . . . . . . . . . . . . . . . . .
7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0
8.01,740120)
2.1)
. Briggs & Stratton
30PRCD
.Briggs & Stratton
NOTICE
OFF (0)
ON/OFF
On/OFF30 OFF (0).
.ON(I)
3.
2.
1.
A,1 1
B,1
A,2 2
B,2 3
C,2
B,3A,3 4
4.
)
(
.
•
•
AGPRCD
BH
CJ
D
K
EL
FM
Not for
Reproduction
7 BRIGGSandSTRATTON.COM
1 .
2 .
3 .
4 .
5 .
1 .
2 .
3 .
4 .
5 .
.
1 .
2 .
3 .
4 .
1 .
2 .D,3ON/OFF
.PRCDON (I)
3 .15.24
50)
4 .
b
5
1
1
1
2
3
1
2
3
MPa/BAR/PSI16.0/160/2,320
*
8.0/2.1
*
MPa/BAR/PSI @ LPM/GPM12.0/120/1,740 @ 5.5/1.45
°C/°F38/100
V220 - 240
H
z
50/60
2,500.
A9.0.
IP xxIPX5
a
hd
k
m/s
2
m/s
2
*
0.2*
L
pA
K
pA
(A
(A
74
*
2*
L
K
WA
(A94
*
LWAd
(A)96
*
EN 60335-2-79:2012
*
Not for
Reproduction
6 BRIGGSandSTRATTON.COM
2
3
1
. (OFF (0DON/OFF 2
3
4
PRCD (G) 5
6
7
1
0-5 2
OFF (0) DON/OFF 3
6 4
5
6
7
8
9
10
..30 11
Briggs & Stratton
..
BRIGGSandSTRATTON.COM
.Briggs & Stratton
4.
OFF (0)DON/OFF 1
.(E 2
.(B 3
4
9
BA
.(DC
Briggs & Stratton
1-10
1
2
3
4
10
A
B
BS 1362.
Not for
Reproduction
9 BRIGGSandSTRATTON.COM
EN_80011059
2014 BRIGGS & STRATTON
Briggs & Stratton
BRIGGSandSTRATTON.COM
.
**
**
Briggs & Stratton Australia Pty
[email protected]
1300 274 447BRIGGSandSTRATTON.COM
.Ltd, 1 Moorebank Avenue, NSW, Australia, 2170
1-800-743-4115
www.onlineproductregistration.com
.Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
E15 E85
12
Not for
Reproduction
8 BRIGGSandSTRATTON.COM
Lavorwash spa
Via J.F.Kennedy, 12 – 46020 Pegognaga (MN) – Italy
2006/42/EC (+2009/127/EC) EN 60335-1:2012
2006/95/EC EN 60335-2-79:2012
2004/108/EC EN 62233:2008
2000/14/EC (+2005/88/EC) EN 55014-1:2006+A1:2009+A2:2011
2011/65/EU (+2015/863/EU) EN 55014-2:1997+A1:2001+A2:2008
EN 50581:2012
94
96
.F.Kennedy, 12 - 46020 Pegognaga (MN) – Italy.
Lavorwash S.p.A
46020 Pegognaga Giancarlo Lanfredi
Not for
Reproduction
4 BRIGGSandSTRATTON.COM
........... 4
................... 4
................................. 5
..............................5
...................... 5
...................... 6
................................7
.. 8
...........................8
..................................10
•
•
•
•
•
•
•
•
•
•
•
•
•
Not for
Reproduction
5 5
1
2
3
1,A
1,B
2,A
2,B
2,C
3,A3,B)
4
4
5
6
5,A),
5,B
4,A
4,K
4,L
6,A).
6,B
6,C
4,J
(5,C
4,E
(4,A
(4,M)
(4,E)
4
7
8
(4,D
4,G
7,C
7,B
7,A
7,B
A G
B H
C J
D
K
E L
F M
Not for
Reproduction
6 BRIGGSandSTRATTON.COM
7,C
7,B
•
4
(C
D)
G
Not for
Reproduction
7 7
.
.
4
E).
9
A
BC
D).
10
(A
(B
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
Stránka sa načítava ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
