Stránka sa načítava...
BRIGGS & STRATTON CORPORATION
MILWAUKEE, WISCONSIN, U.S.A.
Manual No. 80019642 Rev A
Copyright © 2017. Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.
en - English
ar -
da - Dansk
es - Español
fi - Suomi
fr - Français
hu - Magyar
nl - Nederlands
no - Norsk
pl - Polski
ru -
sv - Svenska
sw - Kiswahili
020628-00 &
020673-00
(BPW1700)
2 BRIGGSandSTRATTON.COM
A
G
F
B
D
H
K
E
1
C
M
N
L
J
3
B
A
C
2
B
A
3
11
5
A
B
4
B
B
A
C
7
6
A
B
10
9
A
B
C
A
A
B
C
F
12
D
E
8
13
A
B
4 BRIGGSandSTRATTON.COM
Safety and Control Symbols ................... 4
Equipment Description........................ 4
Features and Controls ........................ 5
Operation................................... 5
Maintenance ................................ 7
Storage .................................... 7
Troubleshooting ............................. 8
Specifications ............................... 8
Warranty ..................................10
The safety alert symbol indicates a potential personal injury
hazard. A safety symbol may be used to represent the
type of hazard. WARNING indicates a hazard which, if not
avoided, could result in death or serious injury. NOTICE
addresses practices not related to personal injury.
This machine is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless supervised
and given instruction concerning safe operation
and understanding of hazards involved.
WARNING
• This machine has been designed for use with
the cleaning agent supplied or recommended
by the manufacturer. The use of other cleaning
agents or chemicals may adversely affect the
safety of the machine.
• High pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons,
live electrical equipment or the machine itself.
• Do not use the machine within range of
persons unless they wear protective clothing.
• Do not direct the jet against yourself or others
in order to clean clothes or foot-wear.
• Risk of explosion – Do not spray flammable liquids.
• High pressure cleaners shall not be used by
children or untrained personnel.
• High pressure hoses, fittings and couplings
are important for the safety of the machine.
Use only hoses, fittings and couplings
recommended by the manufacturer.
• To ensure machine safety, use only original
spare parts from the manufacturer or approved
by the manufacturer
• Water that has flown through backflow
preventers is considered to be non-potable.
• Remove plug from outlet to disconnect power during
cleaning or maintenance and when replacing parts
• Do not use the machine if the cord or important
parts of the machine are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
• Do not use an extension cord with this electric
pressure washer.
• Always switch off the master switch when
leaving the machine unattended.
Save
This electric pressure washer operates at a maximum of 10.0 MPa
(100 BAR) or 1,450 PSI (pounds square inch)) at a flow rate of up
to 7.0 LPM (liters per minute)(1.8 GPM (gallons per minute)).
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter, or otherwise improve the product
and this document at any time without prior notice.
NOTICE If you have questions about intended use, ask
dealer or contact qualified service center. NEVER operate
units with broken or missing parts, or without protective
housing or covers. DO NOT by-pass any safety device
on this machine. DO NOT modify pressure washer in any
way. This equipment is designed to be used with Briggs &
Stratton authorized parts ONLY.
Never spray yourself, others, animals, power
sources, or the unit itself.
Electrical
Shock
Hot Surface
Fall
Flying Objects
Fluid Injection
OffOn
Steam Burn
Steam
Chemical
Burn
Safety
Alert
Fire
Read Manual
Non-Potable
Water
5
This pressure washer is provided with a portable residual
current device (PRCD) built into the plug of the power supply
cord. This device provides additional protection from the risk
of electric shock. The PRCD provides 10 mA of protection.
A sensor will detect an increase in pressure when releasing or
locking the spray gun trigger. The sensor will cause the motor
to shut off for as long as the spray gun trigger is released
or locked. If the motor continues to run when the spray gun
trigger is relased or locked, DO NOT USE THE MACHINE.
Contact a Briggs & Stratton authorized service dealer.
NOTICE Master switch should always be in the OFF
position (0) when pressure washer is not in use.
An overload protection device automatically shuts off the
motor if it overheats or draws excessive current. If the
device trips, disconnect power by pressing master switch
to OFF (0) position. Let unit cool for 30 minutes and press
master switch to ON (I) position.
EU Disposal
This symbol indicates the owner of batteries and
electrical or electronic equipment shall not dispose
of this product with unsorted municipal waste. This
product should be disposed of in environmentally
appropriate waste locations. Please contact Briggs & Stratton
or your local retailer for additional disposal information.
Figure
1
Figure
2
3
4
5
6
NOTICE Use ONLY cold water (less than 38°C (100°F)).
1. Pressing red button (2,A) on gun, insert high pressure
hose (2,B) into gun until it snaps in place.
2. Attach high pressure hose (3,A) to outlet (3,B) and tighten.
NOTICE Make sure water source is capable of supplying water
at a flow rate greater than 11.4 LPM (3.0 GPM) and 0.14-0.55
MPa (1.4-5.5 BAR or 20-80 PSI) at end of garden hose.
3. Run water through garden hose to clean out debris.
NOTICE Using a backflow preventer at pump inlet could
cause pump damage. There MUST be at least 3 m. (10 ft.)
of unrestricted garden hose between pressure washer inlet
and backflow preventer.
WARNING! Water that has flowed through a
backflow preventer is considered to be non-potable.
4. Connect garden hose (4,A) (not to exceed 15 m (50 ft.))
to water inlet (4,B) and tighten.
5. Turn ON water, point gun in a safe direction, press trigger
lock button (2,C), then squeeze trigger to purge system of air.
6. Insert either wand (5,A) into spray gun (5,B), apply
inward pressure, and twist wand 1/4 turn clockwise
until securely in place.
NOTICE For metal nozzle extension, pull back on collar
of wand (6,A), insert desired spray tip (6,B), and release
collar. Tug on spray tip to secure in place.
Figure
1
7
8
9
WARNING! Spray could splash back or propel objects
resulting in serious injury. Always wear indirect vented
(chemical splash) safety goggles marked to comply with
ANSI Z87.1 when using or in vicinity of this equipment.
1. Press master switch (1,L) to OFF (0) (9,A) position.
WARNING! Risk of electrocution. Use of an extension
cord could cause electric shock or burn resulting in
death or serious injury. DO NOT use an extension cord
with this electric pressure washer. Your home’s electrical circuit
receptacle or extension cord may not provide lifesaving portable
residual current device (PRCD) protection.
2. Plug electrical power cord (1,E) into a dedicated electrical
circuit (8) rated for 220 -240 volts AC at 10 Amps that is
properly insalled in accordance with all local codes and
ordinances. Circuit is not to supply any other electrical needs.
3. Press RESET button (7,C). Indicator light (7,B) should
be ON.
NOTICE Indicator light must be ON for the electric pressure
washer to operate.
4. Press TEST button (7,A). Indicator light (7,B) should be OFF.
5. Press RESET button (7,C). Indicator light (7,B) should
be ON.
WARNING!
Risk of electrocution. Non-operating
PRCD could result in death or bodily injury. If
indicator light does not stay ON after test and
reset, do not use PRCD.
6. Press master switch to ON (I) (9,B) position.
7. Point gun in a safe direction, press trigger lock button
and squeeze trigger.
The motor will start and stop as spray gun trigger is depressed
and released.
Spray Tips
The turbo whirls a powerful pin-point jet of water for intense
cleaning. The black spray tip is for general soap applications.
The yellow spray tip is for general rinsing and high pressure
applications. The red spray tip is for maximum cleaning.
Usage Tips
• For most effective cleaning, keep spray tip from
20 to 61 cm. (8 to 24 in.) away from cleaning surface.
• If you get spray tip too close, especially using a high pressure
spray tip, you may damage surface being cleaned.
• DO NOT get closer than 15 cm. (6 in.) when cleaning tires.
Figure
1
10
WARNING! Chemicals could cause burns resulting
in death or serious injury. DO NOT use caustic liquid
with pressure washer. Use ONLY pressure washer
safe detergents/soaps. Follow manufacturers instructions.
A Spray Gun H Water Supply Inlet
B Metal Nozzle Extension J High Pressure Hose
C Spray Tips (3) K Identification Label
D High Pressure Outlet L Master ON/OFF Switch
E Electric Cord w/ PRCD M Plastic Wand w/ Turbo Tip
F WaterTank N Steam Gun w/ Brush
G Detergent Tank
6 BRIGGSandSTRATTON.COM
1. Remove detergent tank and cap (1G,10). Fill with
detergent solution.
2. Replace cap and detergent tank.
3. Install black spray tip.
NOTICE Detergent cannot be applied with turbo, red or
yellow spray tip.
4. Apply detergent to a dry surface, starting at lower
portion of area to be washed and work upward, using
long, even, overlapping strokes.
5. Allow detergent to “soak in” per detergent manufacturer’s
instructions before washing and rinsing.
Pressure Washer Rinsing Figure
1
1. Remove black spray tip from wand (B) and install
yellow or red spray tip.
WARNING! Kickback from spray gun could cause
you to fall resulting in death or serious injury. Operate
pressure washer from a stable surface. Be extremely
careful if you must use the pressure washer from a ladder,
scaffolding, or any other similar location. Firmly grasp spray
gun with both hands when using high pressure spray to avoid
injury when spray gun kicks back.
2. Apply high pressure spray to a small area and check surface
for damage. If no damage is found, continue rinsing.
3. Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
1
9
1. Release spray gun trigger.
2. Press master switch (1,L) to OFF (0) (9,A) position.
NOTICE Releasing the trigger will shut off the motor but
does not shut off electrical power to the unit.
3. Turn off water supply.
4. ALWAYS point spray gun in a safe direction, press
trigger lock button, and squeeze trigger to relieve built
up pressure in the unit.
WARNING! The high pressure stream of water that
this equipment produces could cut through skin and
its underlying tissues, resulting in serious injury and
possible amputation. Keep high pressure hose connected to
pump and spray gun while system is pressurized. DO NOT
allow CHILDREN to play or operate pressure washer.
ALWAYS point spray gun in safe direction, squeeze spray
gun trigger to release high pressure, every time you turn off
pressure washer.
5. Disconnect PRCD plug (1,E) from outlet, and store
power cord.
6. Store high pressure hose (1,J) below water tank.
7. Store spray gun (1,A) and plastic wand (1,M) in
holders. Store spray tips (1,C) in holder on metal
wand. See Features and Controls.
1
9
This pressure washer must be grounded. If it should
malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric
shock. This pressure washer is equipped with a cord having an
equipment grounding conductor and grounded plug. The plug
must be plugged into a properly installed and and grounded
outlet in accordance with all local codes and ordinances.
WARNING! Improper connection of the grounding
conductor can result in a risk of electrocution. Do not
modify pressure washer plug. If it does not fit the outlet,
install a proper outlet by a qualified electrician. DO NOT use any
type of adaptor with this pressure washer.
NOTICE Use ONLY distilled water. DO NOT use any
other liquids that could be flammable or clog the system.
1. Remove water tank cap and tube from water tank (1,F).
2. Fill tank with distilled water.
NOTICE To ensure optimal pressure washer operation,
use ONLY distilled water. Limestone deposits could
compromise the pressure washer’s normal operation
intermittent steam supply, water leaks, nozzle and pipe
clogging). If this occurs, please contact a Briggs & Stratton
authorized Service Service Dealer. DO NOT use any other
liquids that could be flammable or clog the system.
3. Place suction tube and cap in water tank.
WARNING! Hot surfaces and steam
produced by the steam gun could cause
burns resulting in serious injury. DO NOT
touch steam jet or nozzle end with hands during use. Allow
equipment to cool before touching. ALWAYS point steam
gun in safe direction while system is operating. DO NOT
aim steam gun at people or animals.
NOTICE Garden hose and high pressure hose do not
need be connected to use the steam function.
4. Perform Steps 1 - 5 in Starting Pressure Washer.
5. Turn master switch to STEAM function position (II) (9,C) and
wait 60 SECONDS for steam to build to function adequately.
NOTICE When steam gun trigger is first squeezed,
a small amount of water may precede steam. ALWAYS
point steam gun in a safe direction.
NOTICE Never let water in tank run out completely. Refill tank
when the water level reaches 1/4 full. Operating the pressure
washer without water can damage the boiler feed pump.
6. Point gun in a safe direction, disengage trigger lock and
squeeze trigger. Steam will release from the nozzle.
7
1
9
10
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and “freeze”
pump action. Follow these procedures after every use:
1. Drain detergent tank (1,G), add 0.5 liter (0.5 quart) of
water, and run for 1-2 minutes with black spray tip.
Drain water from detergent tank.
2. Press master ON/OFF switch (1,L) to OFF (0) (9,A)
position. Remove power cord plug from electrical outlet.
3. Turn off water supply. Point gun in a safe direction,
press trigger lock button, and squeeze trigger to
relieve trapped pressure.
4. Disconnect garden hose from water inlet. Disconnect
high pressure hose from gun and high pressure outlet.
5. Drain water from hose and spray gun, wipe off all
exterior surfaces.
6. Drain water from pump by tipping unit onto its right side
(water inlet facing down) for two minutes. Flip unit over and
let rest on high pressure outlet for an additional two minutes.
7. Store high pressure hose (1,J) below water tank.
8. Store spray gun and plastic wand in holders. Store spray
tips in holder on metal wand. See Features and Controls.
9. Store unit in a clean, dry area.
10. If storing for more than 30 days, see Storage.
Regular electric maintenance will improve performance
and extend the life of the pressure washer. See any
Briggs & Stratton Authorized Service Dealer for service. DO
NOT allow children to clean or maintain without supervision.
The electric pressure washer’s warranty does not cover
items that have been subjected to operator abuse or
negligence. To receive full value from warranty, operator
must maintain pressure washer as instructed in this
manual, including proper storage as detailed in Storage.
WARNING! To ensure machine safety, use only
original spare parts from the manufacturer or approved
by the manufacturer. Should you have questions about
replacing components on your pressure washer, please visit our
website at BRIGGSandSTRATTON.COM. If cord is damaged,
see an Briggs & Stratton Authorized Service Dealer.
Figure
1
9
11
1. Press master switch (1,L) to OFF position (0) (9,A). Remove
power cord plug from outlet. Allow 10 minutes for unit to cool.
2. Slide brush attachment off end of steam gun (1,N) or
remove spray tip from metal nozzle extension (1,B).
3. Insert end of wire tip cleaner (11) into small opening
repeatedly to remove any clog or sediment build up.
4. Reinstall brush on steam gun or spray tip on metal
nozzle extension.
Figure
12
The use of lubricant (petroleum or synthetic grease) helps
seat o-rings providing an improved seal. Apply lubricant to
o-rings prior to assembling high pressure hose (pump end)
(A), high pressure hose (gun end) (B), garden hose to the
pump (C), metal wand (spray tip end) (D), and metal (E)
and plastic wand (F) (gun end).
Purchase an O-Ring Maintenance Kit by contacting a
Briggs & Stratton Authorized Service Dealer. NEVER repair
leaking connections with sealant of any kind. Replace
o-ring or seal.
Figure
13
WARNING! To reduce the risk of fire, replace
only with 13-amp BS 1362 rated fuse.
If equipped with fuse within PRCD:
1. Locate fuse on pin side of PRCD plug.
2. Using a flat-head screwdriver, remove cover (A) and
fuse. Remove fuse (B) from cover. Replace fuse with
13-amp BS 1362 rated fuse.
3. Insert cover and fuse.
Follow steps 1-9 in After Each Use.
NOTICE Water left in pump could freeze and permanently
damage pump. Freeze damage is not covered under warranty.
To protect the pump from damage caused by mineral
deposits or freezing, use PumpSaver to prevent freeze
damage, and lubricate pistons and seals.
NOTICE Failure to protect unit from freezing
termperatures will damage pump and render unit
inoperable. Freeze damage is not covered under warranty.
1. Wrap high pressure hose around hook below water tank.
2. Coil and store power cord.
3. Store spray gun and plastic wand in holders. Store spray
tips in holder on metal wand. See Features and Controls.
4. Cover unit with a suitable protective cover that does
not retain moisture and store in a clean, dry area
protected from freezing temperatures.
8 BRIGGSandSTRATTON.COM
Problem Cause
Pump has following
1. Water inlet is blocked.
2. Inadequate water supply.
3. Garden hose is kinked or leaking.
4. Clogged water inlet screen.
5. Spray tip is obstructed.
1. Clear inlet.
2. Provide adequate water flow.
3. Straighten garden hose or replace if leaking.
4. Clean or replace water inlet screen.
5. Clean spray tip.
1. Water supply is not turned on.
2. Unit is not turned on.
3. Garden hose is too long.
4. Fuse blown or circuit breaker tripped.
1. Turn on water supply.
2. Press master ON/OFF switch to ON (I)
position. Reset PRCD.
3. Use only 15.24 m (50 ft.) maximum
garden hose.
4. a.) Replace fuse or reset circuit breaker.
b.) Disconnect other electrical
appliances and turn off lights in the
circuit or operate on dedicated circuit.
c.) Run 5 minutes with turbo spray tip.
spray.
1. High pressure spray tip is installed. 1. Install black tipped spray tip.
1. Garden hose loose to water inlet.
2. Loose high pressure hose connections.
3. Damaged o-ring.
1. Hand tighten garden hose.
2. Remove hose and reinstall.
3. Replace o-ring.
Allowable Pressure MPa/BAR/PSI 14.0/140/2,030
*
Max Flow LPM/GPM 7.0/1.8
*
Rated Pressure and Flow MPa/BAR/PSI @ LPM/GPM 10/100/1,450 @ 4.5/1.19
*
Max Water Supply Temperature °C/°F 38/100
Rated Voltage V 220 - 240
Rated Frequency Hz 50/60
Power Consumption W 1,900
Current A 9.0
Protection Class Class Class I
Protection Degree IP xx IPX5
Hand - Arm Vibration a
hd
Uncertainty K
m/s
2
m/s
2
*
0.2
*
Sound Pressure Level L
pA
Uncertainty K
pA
dB(A)
dB(A)
76*
2
*
Measured Sound Power Level L
WA
dB(A) 92
*
Guaranteed Sound Power Level L
WAd
dB(A) 94
*
*
Per EN 60335-2-79: 2012.
9
Lavorwash spa
Via J.F.Kennedy, 12 – 46020 Pegognaga (MN) – Italy
This Declaration of Conformity is issued under the sole responsibility of the manufacturer. This is to certify that the
products listed in this document are in conformity with the relevant Union harmonization legislation and can carry the CE
mark. These models comply with the following Directives and related Standards.
High Pressure Cleaner
BPW1700
2006/42/EC (+2009/127/EC) EN 60335-1:2012
2006/95/EC EN 60335-2-79:2012
2004/108/EC EN 62233:2008
2000/14/EC (+2005/88/EC) EN 55014-1:2006+A1:2009+A2:2011
2011/65/EU (+2015/863/EU) EN 55014-2:1997+A1:2001+A2:2008
EN 50581:2012
Sound Power Level
Measured dB(A): 92
Guaranteed dB(A): 94
2000/14/EC: The appliance is defined by No. 27 of Annex I. Conformity evaluation procedure in accordance with Annex V.
The technical file is stored in Lavorwash spa, via J.F.Kennedy, 12 - 46020 Pegognaga (MN) – Italy.
Lavorwash S.p.A
via J.F.Kennedy, 12
46020 Pegognaga Giancarlo Lanfredi
(MN) - Italy Pegognaga, October 15, 2015 General Manager
10 BRIGGSandSTRATTON.COM
80011059_EN Rev -
BRIGGS & STRATTON PRODUCTS WARRANTY POLICY January 2014
LIMITED WARRANTY
Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship
or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for
and is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM. The purchaser must contact the Authorized Service Dealer, and then make the product available to the Authorized Service Dealer for
inspection and testing.
.
Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state or country to country.**
WARRANTY PERIOD
** In Australia - Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM, or by calling 1300 274 447, or by emailing or writing to [email protected], Briggs & Stratton Australia Pty Ltd, 1
Moorebank Avenue, NSW, Australia, 2170.
The warranty period begins on the date of purchase by the first retail or commercial consumer. “Consumer use” means personal residential household use by a retail
consumer. “Commercial use” means all other uses, including use for commercial, income producing or rental purposes. Once a product has experienced commercial
use, it shall thereafter be considered as a commercial use product for purposes of this warranty.
To ensure prompt and complete warranty coverage, register your product at the website shown above or at www.onlineproductregistration.com, or mail the complete
registration card (if provided), or call 1-800-743-4115 (in USA).
Save your proof of purchase receipt. If you do not provide proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the
product will be used to determine the warranty period. Product registration is not required to obtain warranty service on Briggs & Stratton products.
ABOUT YOUR WARRANTY
Warranty service is available only through Briggs & Stratton Authorized Service Dealers. Most warranty repairs are handled routinely, but sometimes requests for
warranty service may not be appropriate. This warranty covers only defects in materials or workmanship. It does not cover damage caused by improper use or abuse,
improper maintenance or repair, normal wear and tear, or stale or unapproved fuel.
Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual. Using the product in a way not described in the Operator’s
Manual or using the product after it has been damaged will not be covered under this warranty. Warranty coverage will also not be provided if the serial number on the
product has been removed or the product has been altered or modified in any way, or if the product has evidence of abuse such as impact damage or water/chemical
corrosion damage.
- This product must be maintained according to the procedures and schedules provided in the Operator’s Manual, and serviced or
repaired using genuine Briggs & Stratton parts or equivalent. Damage caused by lack of maintenance or use of non-original parts is not covered by warranty.
Normal Wear and Tear - Like most mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not cover repairs when normal
use has exhausted the life of a part or the equipment. Maintenance and wear items such as filters, belts, cutting blades, and brake pads (except engine brake pads) are
not covered by warranty due to wear characteristics alone, unless the cause is due to defects in material or workmanship.
- In order to function correctly, this product requires fresh fuel that conforms to the criteria specified in the Operator’s Manual. Engine or
equipment damage caused by stale fuel or the use of unapproved fuels (such as E15 or E85 ethanol blends) is not covered by warranty.
This warranty excludes damage due to accident, abuse, modifications, alterations, improper servicing, freezing or chemical deterioration.
Attachments or accessories that were not originally packaged with the product are also excluded. There is no warranty coverage on equipment used for primary power in
place of utility power or on equipment used in life support applications. This warranty does not include used, reconditioned, second-hand, or demonstration equipment or
engines. This warranty also excludes failures due to acts of God and other force majeure events beyond the manufacturer’s control.
Consumer Use Commercial Use
12 months None
5
Briggs & Stratton
1
AH
BJ
C(3K
DL
E
(PRCD
M
FN
G
6
5
4
3
2
38 ةظحم
100
(2,A) 1
(2,B)
(3,B)(3,A) 2
ةظحم
0.14-0.553.011.4
20-801.4-5.5)
3
ةظحم
103
(4,A) 4
(4,B)
50
15
5
(2,C)
(5,B)(5,A) 6
1/4
(6,A) ةظحم
(6,B)
9
8
7
1
ANSI Z87.1
(9,A) (0(1,L) 1
PRCD
8(1,E)
2
10240 – 220
(7,B)(7,C) 3
ةظحم
(7,B)(7,A) 4
(7,B)(7,C) 5
PRCD
.PRCD
I) (9,B 6
7
2486120
615 •
10
1
1G,10 1
2
3
ةظحم
4
5
BRIGGSandSTRATTON.COM 4
4. . . . . . . . . . . . . . . . . . . . . . . . .
4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. . . . . . . . . . . . . . . . . . . . . . . . . . .
5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. . . . . . . . . . . . . . . . . . . . . . . . . .
8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ةظحم
•
•
•
•
•
•
•
•
•
•
•
•
•
10.0
1.450
1.87.0
Briggs & Stratton
.
(PRCD
10PRCD
Briggs &,
.Stratton
0
ةظحم
30
0
.(1
7
Briggs & Stratton
.
Briggs & Stratton
.BRIGGSandSTRATTON.COM
11
9
1
(0(1,L) 1
(9,A)
10
(1,N) 2
(1,B)
11 3
4
12
A
CB
FED
Briggs & Stratton
13
A
B
BS 1362.
ةظحم
ةظحم
1
2
3
4
BRIGGSandSTRATTON.COM 6
1
B 1
2
3
9
1
1
(9,A) (0L,1 2
ةظحم
3
4
(1,E) PRCD 5
(1,J)
6
(1,M)1,A
7
1,C
9
1
ةظحم
.(1,F 1
2
ةظحم
Briggs &
Stratton
3
ةظحم
5 – 1 4
.
II) (9,C
5
60
ةظحم
ةظحم
1/4
6
10
9
1
0.50.51G, 9 1
1-2
(1,L) 2
(9,A) (0
3
4
5
6
(1,J)
7
8
9
30 10
.
Lavorwash spa
12 – 46020 Pegognaga (MN)
CE
BPW1700
EN 60335-1:2012 2006/42/EC (+2009/127/EC)
EN 60335-2-79:2012 2006/95/EC
EN 62233:2008 2004/108/EC
EN 55014-1:2006+A1:2009+A2:2011 2000/14/EC (+2005/88/EC)
EN 2011/65/EU (+2015/863/EU) (+2015/863/EU) (+2015/863/EU)
55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2006+A1:2009+A2:2009 /2014/35
EN 61000-3-3:2013 /2014/30
EN 50581:2012
92.0
94.0
.V
I27
EC/2000/14
Pegognaga (MN 46020 - 12Lavorwash spa
Lavorwash S.p.A
12
Pegognaga 46020
2015MN) - Italy Pegognaga, 15)
9
BRIGGSandSTRATTON.COM 8
1 .
2 .
3 .
4 .
5 .
1 .
2 .
3 .
4 .
5 .
1 .
2 .
3 .
4 .
1 .
2 .
.PRCDI
3 .
5015.24
4 .
5
1
1
1
2
3
1
2
3
.
14.0/140/2,030
*
7.0/1.8
*
4.5/1.19
*
38/100
220 - 240
50/60
1,900
9.0
IP xxIPX5
a
hd
K
m/s
2
m/s
2
*
0.2
L
K
76
*
2
*
L
WA
92.0
*
94.0
*
.EN 60335-2-79: 2012
*
BRIGGSandSTRATTON.COM 10
11
80011059_EN -
2014 BRIGGS & STRATTON
Briggs & Stratton
BRIGGSandSTRATTON.COM
.
**
**
salesenquires@
1300 274 447BRIGGSandSTRATTON.COM
.Briggs & Stratton Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia, 2170
briggsandstratton.com.au
www.onlineproductregistration.com
1-800-743-4115
.Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
E15 E85
12
4 BRIGGSandSTRATTON.COM4 BRIGGSandSTRATTON.COM
........ 4
.................. 4
...................... 5
..................................... 5
................................. 8
................................8
.............. 9
.............................. 9
.................................11
ЗАБЕЛЕЖКА
•
•
•
•
•
•
•
•
•
•
•
•
•
MPa (100 BAR
5 5
ЗАБЕЛЕЖКА
ЗАБЕЛЕЖКА
1
2
3
4
5
6
ЗАБЕЛЕЖКА
38°C (100°F)).
2,A
(2,B
3,A
3,B
ЗАБЕЛЕЖКА
ЗАБЕЛЕЖКА
4,A
4,B
2,C
5,A5,B),
ЗАБЕЛЕЖКА
6,A
6,B
1
7
8
9
1,L
9,A).
A H
B J
C K
D
L
E
M
F N
G
6 BRIGGSandSTRATTON.COM6 BRIGGSandSTRATTON.COM
7,C
7,B
ЗАБЕЛЕЖКА
7,A
7,B
7,C
7,B
(I) (9,B).
•
1
10
(1G,10
Забележка
1
(B
1
9
1,L
9,A).
ЗАБЕЛЕЖКА
(1,E
1,J
1,A
(1,M
1,C
/
