T732

fifine T732 Používateľská príručka

  • Ahoj! Prečítal som si používateľskú príručku pre mikrofón Fifine T732. Som pripravený odpovedať na vaše otázky ohľadom inštalácie, nastavenia, používania a riešenia problémov s týmto mikrofónom. Príručka obsahuje informácie o pripojení, nastavení hlasitosti, umiestnení mikrofónu a riešení problémov s nahrávaním zvuku na systémoch Windows a macOS.
  • Ako pripojiť mikrofón k počítaču?
    Čo robiť, ak mikrofón nezachytáva zvuk?
    Ako nastaviť úroveň hlasitosti mikrofónu?
    Ako správne umiestniť mikrofón?
T732
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3-21
Čeština
22-40
Slovenčina
41-59
Magyar
60-78
Deutsch
79-97
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
What’s in the Box?
1. Shock mount
2. Microphone
3. C-Clamp
4. Windscreen
Cap
5. 3/8” to 5/8”
Adapter
6. Desktop Boom Arm 7. Pop Filter 8. 2.5 m USB
Cable
9. Tripod Stand
10. Pivot Mount
Metal Ring
Install the Microphone stand on the Table
1. Screw the lower part of the C-clamp until it is tight and secure
2. Insert the boom arm (the end without screw) into the hole of C-clamp
3. Tighten the screw
4. Screw the shock mount to the boom arm via the included adapter
Note: DON'T rotate the boom arm when the screw on the C- clamp is tightened. Loose
the screw first, adjust the position of the arm, and then tighten it.
Mount to your desktop via the included C-clamp accurately:
Unscrew the C-clamp and slide it over the side of your desktop, making sure that both
the top of the C-clamp and the underside are resting on flat surfaces. Overly rounded or
overhanging desktop edges do not make good mounting surfaces.
5
Installation Quick Guide
1. Connect the microphone to the shock mount.
2. Speak directly into the mic diaphragm (the side of the microphone with Fifine logo),
not into the rear or the top of the microphone.
6
3. Connect to computer. Plug the microphone into rear back USB port of your computer.
Rear
Front
7
Install the Tripod Stand
1.Attach the mic to the pivot mount and screw the metal ring to the end of the mic.
2.Screw the pivot mount onto the top of the tripod stand.
3.Loose the screw, adjust the angle of the mic and tighten the screw again.
8
4.Loose the metal ring, adjust the mic horizontally and tighten it.
9
Computer Setup
Apple MacOS
1. Plug the free end of the provided USB cable into the USB port on your computer. Your
computer will automatically recognize the USB device and install a driver. There may be
no pop- up window or message though.
2. To select the T732 as your audio input, first, open your System Preferences.
3. Next, click Sound to display the Sound preference pane.
10
4. Click the input tab and make certain “USB PnP Audio Device” is selected as the default
input device. Drag progress bar to adjust volume of input.
NOTICE:
If you want to monitor your voice when using MacBook, you must turn on any
recording software first (Audacity for example), make sure to click “Software
Playthrough(on)’, then click the record button to begin, otherwise you cannot
hear any sound when you speak to the mic.
Choose the default Dictation & Speech software when you use the speech to text
in MacBook, click "On" under Dictation window, so that your microphone can be
recognized by the software.
11
If your Mac only has USB C port, you will need a genuine Apple USB-C to USB
female adapter for connection. And pls plug the USB adapter into your Mac first,
then connect the mic with the adapter.
Windows
Not Included
Please wait for a few secs when first time operation since driver of microphone takes
time to automatically install. There may be no pop-up window or message though. (If
plugging USB plug in a different USB port, driver installs again).
After installation, you can test the mic by speaking to it. If the mic picks up no sound,
please follow procedures below.
1. Right-click the speaker icon at the bottom right of the screen. Click "Sounds'.
12
2. Click the Sound control panel.
3.Confirm the loudspeaker is open.
13
4. Click the loudspeaker is being used - ”Properties” -- “levels” drag progress bar to adjust
volume of output.
5. Select the Recording tab and choose “USB PnP Audio Device” as the default device.
When you speak to mic, bar-type icon will turn green and bounce. If it remains
unchanged, please reset computer, and plug again the mic in another USB port. If
there’s still no “USB PnP Audio Device”, please contact Fifine after sales service.
14
6. If you want to monitor your recording, click Microphone “USB PnP Audio Device’-
“Properties”-"Listen’”-click” Listen to this device’-"Apply”. No sound is heard through
earphone/built-in speaker if you don’t follow this procedure.
NOTE: Click off “Listen to this device” when you are using any recording software or
chatting software (Skype).
7. Double click the “USB PnP Audio Device” to open the Microphone Properties window.
Right click the speaker icon under the Levels tab, change to decibels from percentage.
To get the best sound of the mic, please adjust the mic level during this range (+14.0
to+20.0dB), when the output volume of the speaker is max.
15
Note: (Applicable for Mac and Windows)
1.If computer prompts that it’s unable to identify USB devices, please restart computer
and plug again the microphone into rear back USB port of your computer.
2. If the mic is recognized but no sound comes out, please check whether the System
Sound is set muted.
3. If the mic is recognized but no sound comes out, and your PC is running on Windows
10, please go to settings > privacy > microphone and click the “Allow apps to access the
microphone ‘to ON, then restart your PC.
Recording Software Settings
1. Make sure you have the correct input / output selected.
Note: log out the [Audacity] (or other recording software you are using) if you find the
USB microphone is unavailable. And restart the software after the mic is re-plugged.
16
Input: USB PnP Audio Device
Output: Please choose your output device as needed
2. Make sure click off “listen to this device” in your computer system when you are using
any recording software, or else you would hear duet of yourself just like too much echo.
3. There are several ways to improve the usage. Come to FIFINEMICROPHONE.COM, find
Technical Support under the “SUPPORT” tab or type the
https://fifinemicrophone.com/pages/knowledge-base directly to search the Technical
Support solution for your interested subject.
17
4. For windows computers, we recommend audacity, and for Apple computers, you can
use Apple's own QuickTime player to test the recording.
5. Applications setting “Skype”
Important Notice
Setting your software levels
Correct adjustment of microphone level is important for optimum performance. Ideally,
the microphone level should be as high as possible without overloading the input of
your computer. If you hear distortion, or if your recording program shows levels that are
consistently overloaded (at peak levels), turn the microphone volume (or level) down,
either through your control panel (or system preferences) settings, or through your
recording software. If your recording program shows insufficient level, you can increase
the microphone gain either from the control panel (or system preferences) settings or
through your recording program.
Selecting software
You have many choices in recording software. Audacity, available for free online at
http://audacity.sourceforge.net/, isa widely used software program that provides basic
recording software.
Note: The microphone must be plugged in first and secondly turning on the recording
software.
18
Positioning your microphone
Itis important to position the microphone directly in line (on axis) with the person
speaking/ singing or instrument (or other sound source) to achieve the best frequency
response of the microphone. For use in speaking/singing applications, the ideal
placement for the microphone is directly in front of the person speaking/singing.
Protecting your microphone
Avoid leaving your microphone in the open air or in areas where temperatures exceed
110° F (43° C) for extended periods. Extremely high humidity should also be avoided.
Specification
Power Supply: 5V
Polar Pattern: Uni-directional
Frequency Response: 50Hz-20KHz
Sensitivity: -45dB+3dB (at 1kHz)
Max. SPL: 110dB (at 1kHzs1% T.H.D)
S/N Ratio: 278dBA
19
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as
batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
20
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Microphone
Model / Type: T732
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/30/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
/