Stránka sa načítava...
User Manual
Carefully read
the instructions provided in this manual
before installing the product, before
any use of the
product and before any maintenance. Be sure to follow
the safety instructions. Failure to follow these
instructions may result in accidents and/or damage.
Keep this manual so that you can refer to the
instructions in the future.
TABLE OF CONTENTS
1. BOX CONTENTS ................................................ 4
2. INFORMATION REGARDING USE .................. 5
3. MOUNTING SIMTASK STEERING KIT ............ 7
4. INSTALLATION ON A SUPPORT .................... 9
Attaching SimTask Steering Kit to a table,
a desk or a shelf ......................................... 10
5. INSTALLING A T128 RACING WHEEL ON
SIMTASK STEERING KIT ........................................ 12
Adjusting the inclination of the racing
wheel ........................................................... 14
Installing the spinner knob on the rim ..... 16
6. INSTALLING A T248 RACING WHEEL ON
SIMTASK STEERING KIT ........................................ 18
Adjusting the inclination of the racing
wheel ........................................................... 19
Installing the spinner knob on the rim ..... 21
7. FAQ AND TECHNICAL SUPPORT .................. 23
3
Thanks to SimTask Steering Kit adapt your driving
position to any type of vehicle, with the adjustable
system of inclination.
This manual will help you install and use your
SimTask Steering Kit under the best conditions.
Before starting, make sure to carefully read all of
these instructions and warnings: they will help you
get the most enjoyment out of your product.
5
2. Information regarding use
Documentation
Before using this
product, carefully read this
documentation again, and keep it for future reference.
Securing the gaming area
- Do not place any object in the gaming area which may
disrupt the practice of the user, or which may provoke
an inappropriate movement or an
interruption by
another person (coffee cup, telephone, keys, for
example).
-
Do not cover the power cables with a carpet or rug,
blanket or covering or any other item, and do not place
any cables where people will be walking.
8
- Use only parts and screws supplied with your product.
- Assemble all components as shown in the diagram.
- During assembly, make sure that all parts are securely
fastened.
- Once assembly is complete
, check that all
components are secure and that there is no play.
- Be careful not to overtighten the screws.
13
Insert the fastening screw in the clamp, then tighten
the device by turning the screw counterclockwise, so that
it feeds into the threaded hole located beneath the racing
wheel, until the wheel is perfectly stable.
The clamp and the fastening screw are provided with the
T128 racing wheel.
For more information on attaching the racing wheel,
please refer to the T128 user manual.
Xbox One/Xbox Series/PC version:
https://support.thrustmaster.com/product/t128x/
PS4
/PS5
/PC version:
https://support.thrustmaster.com/product/t128-ps/
Never tighten the fastening
screw alone without the
clamp in place. This could damage the racing wheel.
14
Adjusting the inclination of the racing
wheel
SimTask Steering Kit features sliding side rails that let you
adjust precisely the inclination of the racing wheel to suit
the type of vehicle you’re driving.
Loosen the side screws and slide them up or down to
adjust the inclination of the racing wheel.
Tighten the side screws when you are satisfied with
the inclination.
18
6. Installing a T248 racing wheel on
SimTask Steering Kit
Place the T248 racing wheel on the SimTask Steering
Kit shelf and tighten the side screws to hold the racing
wheel in position.
Insert the two screws supplied in the clamping system,
then tighten the device by turning the screws
counterclockwise, so that they feed into the threaded
holes located beneath the racing wheel, until the wheel is
perfectly stable.
19
Adjusting the inclination of the racing
wheel
SimTask Steering Kit features sliding side rails that let you
adjust precisely the inclination of the racing wheel to suit
the type of vehicle you’re driving.
Loosen the side screws and slide them up or down to
adjust the inclination of the racing wheel.
Tighten the side screws when you are satisfied with
the inclination.
/
