Samsung RS61781GDSR Používateľská príručka

English

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

Free Standing Appliance

DA99-04031D-11.indb 01DA99-04031D-11.indb 01 2015. 12. 15.  2:212015. 12. 15.  2:21

02_ safety information

SAFETY INFORMATION

• Before operating the

appliance, please read this

manual thoroughly and

retain it for your reference.

• Use this appliance only

for its intended purpose

as described in this

instruction manual. This

appliance is not intended

for use by persons

(including children) with

reduced physical, sensory

or mental capabilities,

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

WARNING

hazards involved.

Children shall not play with

the appliance.

Cleaning and user

maintenance shall not be

made by children without

supervision.

• Because these following

operating instructions

cover various models,

the characteristics of

your refrigerator may

differ slightly from those

described in this manual.

CAUTION/WARNING SYMBOLS

USED

WARNING

Indicates that a danger of

death or serious injury exists.

CAUTION

Indicates that a risk of

personal injury or material

damage exists.

OTHER SYMBOLS USED

Represents something you

must NOT do.

Represents something you

must NOT disassemble.

Represents something you

must NOT touch.

WARNING

safety information

DA99-04031D-11.indb 02DA99-04031D-11.indb 02 2015. 12. 15.  2:212015. 12. 15.  2:21

safety information _03

Represents something you

must follow.

Indicates that you must

disconnect the power plug

from the socket.

Represents a ground is needed

to prevent electric shock.

It is recommended that

this symbol be handled by

service man.

These warning signs are here to

prevent injury to you and others.

Please follow them explicitly.

After reading this section,

keep it in a safe place for

future reference.

CE Notice

This product has been determined

to be in compliance with the Low

Voltage Directive (2006/95/EC),

the Electromagnetic Compatibility

Directive (2004/108/EC),

RoHS Directive (2011/65/EU),

Commission Delegated Regulation

(EU) No 1060/2010 and the Eco-

Design Directive(2009/125/EC)

implemented by Regulation (EC)

No 643/2009 of the European

Union. (For products sold in

European Countries only)

• This refrigerator must be

properly installed and located

in accordance with the manual

before it is used.

• Use this appliance only for its

intended purpose as described

in this instruction manual.

• We strongly recommend that

any servicing be performed by a

qualified individual.

• R-600a or R-134a can be used

as a refrigerant. Check the

compressor label on the rear

of the appliance and the rating

label inside the fridge to see

which refrigerant is used for the

refrigerator.

• In case of R-600a

refrigerant, this gas

is natural gas with

high environmental

compatibility that

is, however, also

combustible. When

transporting and installing

the appliance, care should

be taken to ensure that no

parts of the refrigerating

circuit are damaged.

• Refrigerant squirting out of the

pipes could ignite or cause an

eye injury. If a leak is detected,

avoid any naked flames or

potential sources of ignition

and air the room in which the

appliance is standing for several

minutes.

DA99-04031D-11.indb 03DA99-04031D-11.indb 03 2015. 12. 15.  2:212015. 12. 15.  2:21

04_ safety information

• In order to avoid the

creation of a flammable

gas-air mixture if a

leak in the refrigerating

circuit occurs, the size

of the room in which the

appliance may be sited

depends on the amount of

refrigerant used.

• Never start up an appliance

showing any signs of damage.

If in doubt, consult your dealer.

• The room must be 1m

3

in

size for every 8g of R-600a

refrigerant inside the appliance.

• The amount of refrigerant in

your particular appliance is

shown on the identification plate

inside the appliance.

• Please dispose of the packaging

material for this product in an

environmentally friendly manner.

• This appliance is not intended

for use by persons (including

children) with reduced physical,

sensory or mental capabilities,

or lack of experience and

knowledge, unless they have

been given supervision or

instruction concerning use

of the appliance by a person

responsible for their safety.

• Children should be supervised

to ensure that they do not play

with the appliance.

WARNING

SEVERE WARNING SIGNS

• Do not install the

refrigerator in a damp

place or place where it

may come in contact with

water.

- Deteriorated insulation of

electrical parts may cause an

electric shock or ﬁ re.

• Do not place this refrigerator in

direct sunlight or expose to the

heat from stoves, room heaters

or other appliance.

• Do not plug several appliances

into the same power socket.

The refrigerator should always

be plugged into its own

individual electrical which has a

voltage rating that matched the

rating plate.

- This provides the best

performance and also prevents

overloading house wiring

circuits, which could cause a

ﬁ re hazard from overheated

wires.

• Make sure that the power plug

is not squashed or damaged by

the back of the refrigerator.

• Do not bend the power cord

excessively or place heavy

articles on it.

- This constitutes a ﬁ re hazard.

• Have the power cord repaired

or replaced immediately by

WARNING

DA99-04031D-11.indb 04DA99-04031D-11.indb 04 2015. 12. 15.  2:212015. 12. 15.  2:21

safety information _05

the manufacturer or its service

agent if power cord has

become frayed or damaged.

• Do not use a cord that shows

cracks or abrasion damage

along its length or at either end.

• If the power cord is damaged,

have it replaced immediately by

the manufacturer or its service

agent.

• When moving the refrigerator,

be careful not to roll over or

damage the power cord.

• Do not insert the power plug

with wet hands.

• Unplug the refrigerator before

cleaning and making repairs.

• Do not use a wet or damp cloth

when cleaning the plug.

• Remove any foreign matter or

dust from the power plug pins.

- Otherwise there is a risk of ﬁ re.

• If the refrigerator is

disconnected from the power

supply, you should wait for

at least ten minutes before

plugging it back.

• If the wall socket is loose, do

not insert the power plug.

- There is a risk of electric shock

or ﬁ re.

• The appliance must be

positioned so that the plug is

accessible after installation.

• The refrigerator must be

grounded.

- You must ground the refrigerator

to prevent any power leakages

or electric shocks caused

by current leakage from the

refrigerator.

• Never use gas pipes,

telephone lines or other

potential lightening rods as

ground.

- Improper use of the ground

plug can result in electric shock.

• Do not dissemble or repair the

refrigerator by yourself.

- You run risk of causing a ﬁ re,

malfunction and/or personal

injury.

• If you smell pharmaceutical or

smoke, pull out power plug

immediately and contact your

Samsung electronics service

center.

• Keep ventilation opening in

the appliance enclosure or

mounting structure clear of

obstruction.

• Do not use mechanical

devices or any other means

to accelerate the defrosting

process, other than those

recommended by the

manufacturer.

• Do not damage the refrigerant

circuit.

DA99-04031D-11.indb 05DA99-04031D-11.indb 05 2015. 12. 15.  2:212015. 12. 15.  2:21

06_ safety information

• Do not place or use electrical

appliance inside the refrigerator/

freezer, unless they are of a

type recommended by the

manufacturer.

• Before changing the interior

light, unplug the appliance from

the power supply.

• If you experience difficulty when

changing the light, contact your

service center.

• The appliance is not intended

for use by persons (including

children) with reduced physical,

sensory or mental capabilities,

or lack of experience and

knowledge, unless they have

been given supervision or

instruction concerning use

of the appliance by a person

responsible for their safety.

• Children should be supervised

to ensure that they do not play

with the appliance.

• Do not let children hang on the

door. If not, a serious injury may

occur.

• Do not touch the inside walls of

the freezer or products stored in

the freezer with wet hands.

- This may cause frostbite.

• If the refrigerator is not to be

used for a long period of time,

pull out the power plug.

- Deterioration in the power cord

insulation may cause ﬁ re.

• Do not store articles on the top

of the appliance.

- When you open or close the

door, the articles may fall and

cause personal injury and/or

material damage.

CAUTION SIGNS

• This product is intended

only for the storage of food

in a domestic environment.

• Manufacturer’s recommended

storage times and expiry dates

of frozen foods should be

adhered to. Refer to relevant

instructions

• Bottles should be stored tightly

together so that they do not fall

out.

• Do not place carbonated

or fizzy drinks in the freezer

compartment

• Do not overfill the refrigerator

with food.

- When you open the door, an

item may fall out and cause

personal injury or material

damage.

• Do not put bottles or glass

containers in the freezer.

- When the contents freeze, the

glass may break and cause

personal injury.

CAUTION

DA99-04031D-11.indb 06DA99-04031D-11.indb 06 2015. 12. 15.  2:212015. 12. 15.  2:21

safety information _07

• Do not spray inflammable gas

near the refrigerator.

- There is a risk of explosion or

ﬁ r e .

• Do not directly spray water

inside or outside the refrigerator.

- There is a risk of ﬁ re or electric

shock.

• Do not store volatile or

flammable substances in the

refrigerator.

- The storage of benzene, thinner,

alcohol, ether, LP gas and

other such products may cause

explosions.

• If you have a long vacation

planned, it is advisable to

empty the appliance or use the

vacation function.

• Do not store pharmaceuticals

products, scientific materials or

temperature-sensitive products

in the refrigerator.

- Products that require strict

temperature controls must not

be stored in the refrigerator.

• Do not put a container filled

with water on the refrigerator.

- If spilled, there is a risk of ﬁ re or

electric shock.

• Do not apply strong shock or

excessive force onto the surface

of glass.

- Broken glass may result in a

personal injury and/or property

damage.

• Take caution when open the

homebar, and do not let children

stay around the door.

- Children may be caught in or

bump the door.

- Unexpected opening of the

homebar may result in physical

injury.

CAUTION SIGNS FOR

CLEANING

• Never put fingers or other

objects into the dispenser

hole and ice chute.

- It may cause personal injury or

material damage.

• Do not use a wet or damp cloth

when cleaning the plug, remove

any foreign material or dust

from the power plug pins.

- Otherwise there is a risk of ﬁ re.

WARNING SIGNS FOR

DISPOSAL

• When disposing of this or other

refrigerators, remove the door/

door seals, door latch so that

small children or animals cannot

become trapped inside.

• Leave the shelves in place so

that children may not easily

climb inside.

CAUTION

DA99-04031D-11.indb 07DA99-04031D-11.indb 07 2015. 12. 15.  2:212015. 12. 15.  2:21

08_ safety information

• R-600a or R-134a is used

as a refrigerant. Check the

compressor label on the rear

of the appliance or the rating

label inside the fridge to see

which refrigerant is used for

your refrigerator. When this

product contains flammable gas

(Refrigerant R-600a) contact

your local authority in regard to

safe disposal of this product.

• Cyclopentane is used as a

insulation blowing gas. The

gases in insulation material

require special disposal

procedure. Please contact your

local authorities in regard to the

environmentally safe disposal of

this product. Ensure that none

of the pipes on the back of the

appliances are damaged prior

to disposal. The pipes shall be

broke in the open space.

• In the event of a power

failure, call the local

office of your Electricity

Company and ask how

long it is going to last.

- Most power failures that are

corrected within an hour or two

will not affect your refrigerator

temperatures. However, you

should minimize the number of

door openings while the power

is off.

CAUTION

- Should the power failure last

more than 2 hours, remove all

ice in the Ice Bucket.

- Should the power failure last

more than 24 hours, remove all

frozen food.

For doors or lids ﬁ tted with locks

and keys, the keys be kept out

of the reach of children and not

in the vicinity of the refrigerating

appliance, in order to prevent

children from being locked inside.

ADDITIONAL TIPS FOR

PROPER USAGE

• Allow the appliance to

stand for 2 hours before

loading foods after

installation and turning on.

• To get best performance of product,

- Do not place foods too closely

in front of the vents at the

rear of the appliance as it can

obstruct free air circulation in

the freezer compartment.

- Wrap the food up properly or

place it in airtight containers

before put it into the fridge

freezer

- Do not put any newly introduced

food for freezing near to already

frozen food.

• There is no need to disconnect

the refrigerator from the power

supply if you will be away for

DA99-04031D-11.indb 08DA99-04031D-11.indb 08 2015. 12. 15.  2:212015. 12. 15.  2:21

safety information _09

less than three weeks. But,

remove all the food if you are

going away for the three weeks

or more. Unplug the refrigerator

and clean it, rinse and dry.

• The appliance might not

operate consistently (possibility

of defrosting of contents

or temperature becoming

too warm in the frozen food

compartment) when sited for

an extended period of time

below the cold end of the range

of temperatures for which

the refrigerating appliance is

designed.

• Do not store food which goes

bad easily at low temperature,

such as bananas, melons.

• Place the ice tray at the

originally provided position by

manufacturer in order to achieve

optimal ice-freezing.

• Your appliance is frost free,

which means there is no

need to manually defrost your

appliance, as this will be carried

out automatically.

• Temperature rising during the

defrost can comply with ISO

requirement. But If you want

to prevent an undue rise in the

temperature of the frozen food

while defrosting the appliance,

please wrap the frozen food in

several layers of paper such as

newspaper.

• Any increase in temperature of

frozen food during defrosting

can shorten its storage life.

• Contains fluorinated greenhouse

gases covered by the Kyoto

Protocol.

• Foam blown with fluorinated

greenhouse gases.

Foam blown additive:

Perﬂ uorohexane Global

Warming Potential (GWP) = 9000

• The temperature of two

star section (sections) or

compartment (compartments)

which have two star symbol

(

) is slightly higher than

other freezer compartment

(compartments).

The two star section

(sections) or compartment

(compartments) is (are) based

on the instruction and/or the

condition as delivered.

SAVING ENERGY TIPS

- Install the appliance in a

cool, dry room with adequate

ventilation. Ensure that it is not

exposed to direct sunlight and

never put it near a direct source

of heat (radiator, for example).

- Not to block any vents and

grilles is recommended for

energy efﬁ ciency.

DA99-04031D-11.indb 09DA99-04031D-11.indb 09 2015. 12. 15.  2:212015. 12. 15.  2:21

10_ safety information

contents

SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR ……………………………………………………… 11

OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR …………………………………………… 18

TROUBLESHOOTING …………………………………………………………………………………………… 25

- Allow warm food to cool

down before placing it in the

appliance.

- Put frozen food in the refrigerator

to thaw.

You can then use the low

temperatures of the frozen

products to cool food in the

refrigerator.

- Do not keep the door of the

appliance open for too long

when putting food in or taking

food out.

The shorter time for which the

door is open, the less ice will

form in the freezer.

- Clean the rear of the refrigerator

regularly. Dust increases energy

consumption.

- Do not set temperature colder

than necessary.

- Ensure sufﬁ cient air exhaust at

the refrigerator base and at the

back wall of the refrigerator.

Do not cover air vent openings.

- Allow clearance to the right, left,

back and top when installing.

This will help reduce power

consumption and keep your

energy bills lower.

- For the most efﬁ cient use of

energy, please keep the all

inner ﬁ ttings such as baskets,

drawers, shelves on the position

supplied by manufacturer.

This appliance is intended

to be used in household and

similar applications such as

- staff kitchen areas in shops,

ofﬁ ces and other working

environments;

- farm houses and by clients

in hotels, motels and other

residential type environments;

- bed and breakfast type

environments;

- catering and similar non-retail

applications.

DA99-04031D-11.indb 10DA99-04031D-11.indb 10 2015. 12. 15.  2:212015. 12. 15.  2:21

setting up _11setting up _11

01 SETTING UP

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on the purchase of your Samsung

Side-By-Side Refrigerator. We hope you will enjoy

the many state-of-the-art features and efﬁ ciencies

that this new appliance has to offer.

Selecting the best location for the

refrigerator

• Select a location with easy access to the water

supply.

• Select a location without direct exposure to

sunlight.

• Select a location with level (or nearly level) flooring.

• Select a location with enough space for the

refrigerator doors to open easily.

• Allow sufficient space to the right, left, back and

top for air circulation.

- If your refrigerator is not level, cooling efficiency

and durability can be declined.

- Refer to drawing and dimensions below for overall

space required for use.

• Please ensure that appliance can be moved freely

in the event of maintenance & service.

When moving your refrigerator

To prevent ﬂ oor damage be sure the front levelling

legs are in the up position (above the ﬂ oor). Refer to

‘Levelling the refrigerator’ in the manual(at page 15).

To protect the ﬁ nish of the ﬂ ooring, place the

protection sheet such as packing carton under the

refrigerator.

When installing, servicing or cleaning behind

the refrigerator, be sure to pull the unit straight

out and push back in straight after ﬁ nishing.

First things ﬁ rst! Make sure that you can easily move

your refrigerator to its ﬁ nal location by measuring

doorways (both width and height), thresholds,

ceilings, stairways, etc. The following chart details

the exact height and depth.

Model RS61*

Dimension

(mm)

Width

Without Door 908

With Door 912

Depth

Only Cabinet 600

Without Handle 718

Height

Without Door 1745

With Door 1780

• Allow clearance to the right, left, back and

top when installing. This will help reduce

power consumption and keep your energy

bills lower.

• Do not install the refrigerator where the

temperature can drop below 10°C.

• Make sure you disconnect the water supply line

BEFORE removing the freezer door. See the next

section on “Separating the Water Line” to avoid

damage.

setting up your side-by-side

refrigerator

at least 6mm

CAUTION

Leg

Screw Driver

DA99-04031D-11.indb 11DA99-04031D-11.indb 11 2015. 12. 15.  2:212015. 12. 15.  2:21

12_ setting up12_ setting up

SETTING UP THE

REFRIGERATOR DOORS

If your entrance won’t allow the refrigerator to pass

easily through it, you can remove the doors.

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors,

and then take off the front leg cover by turning the

three screws counter-clockwise.

Separating the Water Supply Line

from the Refrigerator

1. Remove two water lines (gray one is for ice and

the other one is for water) by pressing the coupler

1

and pulling the water line

2

away.

Be careful that the water tube match same

color.

Reattaching the Water Supply Line

1. The Water Line must be fully Inserted to the center

of transparent coupler to prevent water leakage

from the dispenser.

USING THE ICE MAKER

To Remove the Ice

Bucket

- Hold the handle as shown in

figure1.

- Slightly pull up the bottom part.

- Take out the ice bucket slowly.

To Reﬁ t The Ice Bucket

- Assemble it in the reverse order

of disassembly.

- Push the bucket in firmly until

you hear a clicking sound.

- When the bucket does not fit

into its place, turn the gear

handle on its back by 90

degrees and reinstall it again as

shown in figure 2.

Normal Operation

- Any sounds you hear when

the ice maker dumps ice into

the bucket are part of normal

operation.

- Not dispensing ice for long

periods may cause ice clumps

in the ice bucket. Remove the

remaining ice and empty the

bucket.

- When ice does not come out,

check for any ice stuck in the chute and remove it.

- The first batch of ice cubes may be small due

to air in the pipe after connection, any air will be

purged during normal use.

- When ICE OFF blinks on the display panel,

reinsert the bucket and/or make sure it’s

installed properly.

- When the door is open, the Ice and water

dispenser do not work.

- If you close the door hard, it may cause water

spilling over the ice maker.

- To prevent dropping the ice bucket, use both

hands when removing it.

- To prevent injury, be sure to clean up any ice or

water that may have dropped on the floor.

- Do not let the children hang on the ice dispenser

or on the bucket. They may get hurt.

- Be sure not to put your hand or any object into the

ice chute. It may cause personal injury or damage

mechanical parts.

Figure1

CAUTION

Figure2

Ice Chute

1

2

center of transparent coupler

DA99-04031D-11.indb 12DA99-04031D-11.indb 12 2015. 12. 15.  2:212015. 12. 15.  2:21

setting up _13setting up _13

01 SETTING UP

Be careful not to miss the parts of refrigerator.

When disassembling the hinge, please

make sure the earth wire is not broken or

disconnected.

3. Next, remove the door from the lower hinge

6

by

carefully lifting the door straight up

7

.

Be careful not to pinch the water tubing and

wire harness on the door.

4. Remove the lower hinge

8

from the bracket

9

by gently lifting the lower hinge upwards.

2. Insert the 2 clips in the install pack and check that

each clip holds the line firmly.

Do not cut the water line. Gently separate it

from the coupler.

Removing the freezer door

A few things to mention ﬁ rst.

• Make sure that you lift the door straight up so the

hinges are not bent or broken.

• Be careful not to pinch the water tubing and wire

harness on the door.

• Place doors on a protected surface to prevent

scratching or damage.

1. With the Freezer door closed, remove the upper

hinge cover

1

using a screwdriver, and then

disconnect the wires by gently pulling them apart

2

.

2. Remove hinge screws

3

and the ground screw

4

by turning counter-clockwise, and take off the

upper hinge

5

. Be careful that the door does not

fall on you as you are removing it.

1

2

- on some models

5

4

3

6

7

9

8

clip A (1/4”)

(6.35mm)

DA99-04031D-11.indb 13DA99-04031D-11.indb 13 2015. 12. 15.  2:212015. 12. 15.  2:21

14_ setting up14_ setting up

4. Remove the lower hinge

7

from the bracket

8

by gently

lifting the lower hinge upwards.

Reattaching the Fridge door

To reattach the fridge doors, assemble parts

in reverse order.

LEVELLING THE

REFRIGERATOR

Now that the doors are back on the refrigerator, you

want to make sure the refrigerator is level so that

you can make ﬁ nal adjustments. If the refrigerator

is not level, it will not be possible to get the doors

perfectly even.

The front of the refrigerator is also adjustable.

Before levelling the refrigerator,

remove the front leg cover

Open both the freezer and fridge doors, and then

take off the front leg cover by turning the three

screws counter-clockwise.

Reattaching the freezer doors

To reattach the freezer doors, assemble parts

in reverse order

Removing the Fridge Door

1. With the door closed, remove the upper hinge

cover

1

using a screwdriver.

2. Remove hinge screws

2

and the ground screw

3

by turning counter-clockwise, and take off the

upper hinge

4

. Be careful that the door does not

fall on you as you are removing it.

Be careful not to miss the parts of refrigerator.

3. Remove the door from the lower hinge

5

by lifting

the door straight up

6

.

4

3

2

1

5

6

8

7

DA99-04031D-11.indb 14DA99-04031D-11.indb 14 2015. 12. 15.  2:212015. 12. 15.  2:21

setting up _15setting up _15

01 SETTING UP

In the case of the process to correct the imbalance

is the same. Open the doors and adjust them, one

at a time, as follows:

1. Unscrew the nut

1

from the lower hinge until it

reaches the upper end of the bolt

2

.

When you release the nut

1

, make sure

that you use the Allen wrench provided

3

to loosen the bolt

2

in a counter-clockwise

direction. You should then be able to unscrew

the nut

1

with your ﬁ ngers.

2. Adjust the height difference between the doors by

turning the bolt

2

clockwise or counter

clockwise

.

When you turn clockwise

, the door will

move up.

3. After adjusting the doors, turn the nut

1

clockwise

until it reaches the lower end

of the bolt, then tighten the bolt again with the

wrench

3

to fix the nut in place

1

.

If you do not secure the nut ﬁ rmly, the bolt

may release.

When the Freezer door is lower than

the fridge

Insert a ﬂ at-blade screwdriver into a slot on the Leg,

turn it clockwise or counter clockwise to level the

freezer.

When the Freezer door is higher than

the fridge

Insert a ﬂ at-blade screwdriver into a slot on the Leg,

turn it clockwise or counter clockwise to level the

fridge.

Refer to the next section for the best way to

make very minor adjustments to the doors.

MAKING MINOR ADJUSTMENTS

TO THE DOORS

Remember, a levelling refrigerator is necessary

for getting the doors perfectly even. If you need

help, review the previous section on levelling the

refrigerator.

Leg

Screw Driver

Leg

Screw Driver

Adjustment part

When the door of the freezer is

higher than the fridge

Wrench

Bolt

Nut

1

2

3

DA99-04031D-11.indb 15DA99-04031D-11.indb 15 2015. 12. 15.  2:212015. 12. 15.  2:21

16_ setting up16_ setting up

4. After connecting the water supply to the water

filter, turn your main water supply back on and

Dispense about 3L to clear and prime the water

filter.

INSTALLING THE WATER

DISPENSER LINE

Connecting the water line to the

refrigerator

1. Remove the cap from water line on the unit and

insert compression nut to the water line on the

unit after disassembling from provided water line.

2. Connect both water line from the unit and water

line in the kit

3. Tighten the compression nut onto the

compression fitting. Be careful no gap between

two items.

4. Turn water on and check for any leakage.

CHECKING THE WATER

DISPENSER LINE

A water dispenser is just one of the helpful features

on your new Samsung refrigerator. To help promote

better health, the Samsung water ﬁ lter removes

unwanted particles from your water. However, it

does not sterilize or destroy microorganisms. You

will need to purchase a water purifying system to do

that.

In order for the icemaker to operate properly, water

pressure of 138 ~862 kPa is required. Under normal

conditions, a 170 cc paper cup can be ﬁ lled in 10

seconds.

If the refrigerator is installed in an area with low water

pressure (below 138 kPa), you can install a booster

pump to compensate for the low pressure.

Make sure the water storage tank inside the

refrigerator is properly ﬁ lled. To do this, press the

water dispenser lever until the water runs from the

water outlet.

Water Line installation Kits are included with

unit. You can ﬁ nd it in freezer(or fridge) drawer.

The new hose-sets supplied with the

appliance are to be used and that old hose-

sets should not be reused.

Parts for water line Installation

Connecting to the water supply line

1. First, shut off the main water supply line.

2. Locate the nearest cold, drinking water line.

3. Follow the Water Line Installation Instructions in

the installation kit.

1

Water line fixer

and screws

2

Pipe connector

3

Water line

4

Clip

5

Water Filter

CAUTION

The water line must be connected to

the cold water pipe.

If it is connected to the hot water pipe,

it may cause the purifier to malfunction.

Close Main

Water pipe

Close Main

Water pipe

No gap

Remove

cap

Water Line

from unit

Water Line

from Kit

No gap

Loosen a

DA99-04031D-11.indb 16DA99-04031D-11.indb 16 2015. 12. 15.  2:212015. 12. 15.  2:21

setting up _17setting up _17

01 SETTING UP

Only connect the water line to a drinkable

water source.

If you have to repair or disassemble the water line,

cut off 6.5mm of the plastic tubing to make sure you

get a snug, leak-free connection.

Before being used, the leakage in these

places should be examined

• Samsung Warranty does not cover WATER LINE

INSTALLATION.

• It’ll be done at customer’s charge unless the retail

price includes installation cost.

• Please contact Plumber or Authorized Installer for

the installation if needed.

• If Water leakage occurs due to improper

installation, Please contact installer.

Removing any residual matter inside

the water supply line after installing

ﬁ lter.

1. Turn ON the main water supply.

2. Press the Water button and

push the dispenser pad.

3. Run water through the

dispenser until the water

runs clear (approx. 3L). This

will clean the water supply

system and remove air from

the lines.

4. Additional flushing may be

required in some households.

5. Open the refrigerator door

and make sure there are no

water leaks coming from the water filter.

A newly installed water ﬁ lter cartridge may

cause water to brieﬂ y spurt from the water

dispenser. This is due to air getting into the

line. It should pose no problem to operation.

CAUTION

Water

Ice

DA99-04031D-11.indb 17DA99-04031D-11.indb 17 2015. 12. 15.  2:212015. 12. 15.  2:21

18_ operating18_ operating

OPERATING THE

REFRIGERATOR

Using the Control Panel / Digital

Display

1

Power

Freeze

Button

Speeds up the time needed to freeze products in

the freezer. This can be helpful if you need to quickly

freeze items that spoil easily or if the temperature in

the freezer has warmed dramatically (For example,

if the door was left open). This Function must

be activated before putting large stuff in freezer

compartment at least 20 hours before.

2

Freezer

Button

Press the Freezer button to set the freezer to your

desired temperature. You can set the temperature

between -15°C and -23ºC.

3

Ice Off

Button

Press the Ice Off button to turn the ice making

function off.

When Ice Off blinks on the display panel, reinsert

the bucket and/or make sure it’s installed properly.

When you change the filter, press and hold this

button for 3 seconds to reset the filter schedule.

4

Lighting

Button

Press the Lighting button for the dispenser LED

lamp to stay on.

5

Fridge

Button

Press the Fridge button to set the fridge to your

desired temperature.

You can set temperature between 1°C ~ 7°C and

Power cool.

Power cool will be on the display after 1°C

6

Child Lock

Button

By pressing this button, all buttons will be locked.

The Ice button and the dispenser pad will not work

either.

To cancel this function, press this button again.

If you are going on vacation or business trip or you

do not need to use the refrigerator, press and hold

this button for 3 seconds. The temperature in the

fridge will be around 15°C and the freezer will work

normally.

7

Ice Button

Press the Ice button to choose cubed or crushed

ice.

8

Water

Button

Press the Water button for water.

USING THE DIGITAL DISPLAY

“ Freezer Temp.” indicates the current Freezer

temperature.

“ Fridge Temp.” indicates the current Fridge

temperature.

When not in use the Display will turn off, this is

normal.

POWER FREEZE

This icon will light up when you activate the “Power

Freeze” feature. “Power Freeze” is great for times

when you need a lot of ice. When you have enough,

just press the button again to cancel the “Power

Freeze” mode.

When you use this function the energy

consumption of the refrigerator will increase.

Remember to turn it off when you don’t

need it and return the freezer to your original

temperature setting.

VACATION

This icon will light up when you activate the

“Vacation” feature.

If you are going on vacation or business trip or

you do not need to use the refrigerator, press and

hold the Child Lock button for 3 seconds. The

temperature in the fridge will be around 15°C and

the freezer will work normally. The refrigerator

section should be emptied.

ALARM

This icon will light up all the time. The door alarm will

sound if any door is open for more than 2 minutes.

(Also alarm icon blinking) The beeping and blinking

stops when you close the door. If you need to turn

off the Alarm function, press the Lighting and Fridge

buttons for 3 seconds at the same time.

operating the SAMSUNG side-

by-side refrigerator

1

2

3

4

5

6

7 8

DA99-04031D-11.indb 18DA99-04031D-11.indb 18 2015. 12. 15.  2:212015. 12. 15.  2:21

operating _19operating _19

02 OPERATING

CHILD LOCK

This icon will light up when you activate the Child

Lock function by pressing Child Lock button.

Press this button again to reactivate. Use this

function to prevent children from tampering with

temperature and ﬁ lter settings.

Canceling Exhibition Mode

In case of Exhibition Mode, It seems working

but doesn’t make cool air. To cancel this

mode, press the Power Freeze and Freezer

buttons at the same time for 8 seconds until

“Ding-dong” sounds.

CONTROLLING THE

TEMPERATURE

Basic Temperature of Freezer and

Fridge

The basic and recommended temperature of Freezer

and Fridge compartments are -19ºC/3ºC.

If the temperature of Freezer and Fridge

compartments are too high or low, adjust the

temperature manually.

Controlling the Freezer temperature

The freezer temperature can be set between -15°C

and -23ºC to suit your particular needs. Press

the Freezer button repeatedly until the desired

temperature is shown in the temperature display.

Keep in mind that foods like ice cream may melt at

-16ºC.

LIGHTING

This icon will light up when you activate the

“Lighting” feature. In this case, the dispenser light

(under the display) will be on constantly. If you would

like the dispenser light to come on only when using

the dispenser, turn the “Lighting” feature off.

POWER COOL

This icon will light up when you activate the “Power

Cool” feature.

For a quick fridge cool down, use “Power Cool”.

If you select “Power Cool”, the inside temperature

of the Fridge will decrease for about two and a half

hours.

FILTER INDICATOR

When the ﬁ lter indicator light changes to red, it is

time to change the ﬁ lter. Typically this happens about

every 6 months.

The ﬁ lter Indicator will be Blue when you initially

insert the water ﬁ lter.

The ﬁ lter Indicator will be purple when you have

used your water ﬁ lter for 5 months.

The ﬁ lter Indicator will be Red when you have used

your water ﬁ lter for 6 months.

After removing the old water ﬁ lter and installing a

new one (see page 23 for instructions on how to do

this), reset the indicator status light by pressing the

Ice off button for about 3 seconds.

CUBED ICE , CRUSHED ICE

Enjoy cubed or crushed ice by selecting your

preference from the digital control panel.

The ice light indicates the type of ice that is currently

chosen.

WATER

This icon will light up when you activate the “Water”

feature.

ICE OFF

This icon will light up when you activate the “Ice Off”

feature. In this case, the ice will not be produced.

When Ice Off blinks on the display panel, reinsert

the bucket and/or make sure it’s installed properly.

CAUTION

Exhibition

mode

DA99-04031D-11.indb 19DA99-04031D-11.indb 19 2015. 12. 15.  2:212015. 12. 15.  2:21

20_ operating20_ operating

Using the Water Dispenser

Press the Water button. Place your cup the water

outlet and push gently against the dispenser pad.

Make sure the glass is in line with the dispenser to

prevent the water from splashing out.

To get cooler water

- The dispensed water is cool, not

icy cold

- When you want colder water with

ice, dispense ice to your drink

glass first before filling it with water

to prevent water from splashing

out.

Using the Ice Dispenser

Press the Ice button to select the type of ice you

want.

Place your cup the ice outlet and push gently

against the dispenser pad. Make sure the glass is

in line with the dispenser to prevent the ice from

bouncing out.

When Cubed Ice is selected after using the Crushed

Ice feature, a small amount of residual crushed ice

might be produced.

• Do not put your fingers, hands or any

other unsuitable objects in the chute or

ice-maker bucket.

- It may result in personal injury or material damage.

• Use only the ice maker provided with the

refrigerator.

• The water supply to this

refrigerator must only be

installed/connected by a

suitably qualified person

and connect to a potable

water supply only.

• In order to operate the

ice maker properly, water

pressure of 138 ~ 862 kPa

is required.

The temperature display will move sequentially from

-15°C and -23ºC. When the display reaches -15ºC,

it will begin again at -23ºC.

Five seconds after the new temperature is set the

display will again show the actual current freezer

temperature. However, this number will change as

the Freezer adjusts to the new temperature.

Controlling the Fridge temperature

The refrigerator temperature can be set between

7ºC and 1ºC to suit your particular needs. Press

the Fridge button repeatedly until the desired

temperature is shown in the temperature display.

The temperature control process for the Fridge

works just like the Freezer process.

Press the Fridge button to set your desired

temperature. After a few seconds, the Fridge will

begin tracking towards the newly set temperature.

This will be reﬂ ected in the digital display.

The temperature of the freezer or the refrigerator

may rise from opening the doors too frequently, or

if a large amount of warm or hot food is placed in

either side.

This may cause the digital display to blink. Once

the freezer and refrigerator return to their normal set

temperatures the blinking will stop.

If the blinking continues, you may need to “reset” the

refrigerator. Try unplugging the appliance, wait about

10 minutes and then plug back in.

USING THE ICE AND COLD

WATER DISPENSER

When Ice Off blinks on the display panel, reinsert

the bucket and/or make sure it’s installed properly.

No Ice

Select this if you want to

turn the ice maker off.

Push

WARNING

Ice Chute

Ice Bucket

Ice-Maker Cover

DA99-04031D-11.indb 20DA99-04031D-11.indb 20 2015. 12. 15.  2:212015. 12. 15.  2:21

Stránka sa načítava ...

Samsung RS61781GDSR Používateľská príručka

Samsung RS61781GDSR Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty