Silvercrest SLE 420 A1 Operating Instructions Manual

DEHUMIDIFIER SLE 420 A1

IAN 89301

DEHUMIDIFIER

Operating instructions

PÁRÁTLANÍTÓ

Kezelési útmutató

VYSOUŠEČ VZDUCHU

Návod k obsluze

LUFTENTFEUCHTER

Bedienungsanleitung

POCHŁANIACZ WILGOCI

Instrukcja obsługi

SUŠILEC ZRAKA

Navodilo za uporabo

ODVLHČOVAČ VZDUCHU

Návod na obsluhu

RP89301_Luftentfeuchter_Cover_LB4.indd 2 02.04.13 11:56

English..................................................................................... 2

Polski .................................................................................... 16

Magyar ................................................................................. 30

Slovenšina ........................................................................... 44

esky .................................................................................... 56

Slovenina............................................................................. 68

Deutsch ................................................................................. 82

ID: SLE420 A1_13_V2.0_EN

__RP89301_B4.book Seite 1 Freitag, 19. April 2013 7:28 19

Overview / Przegld / Áttekintés / Pregled / Pehled / Prehad /

Übersicht

5

7

6

1 2

3

4

C

D

10

12

11

8

9

11 10

8

14

16

1512 13

TANK FULL

TIMER

AIR CLEAN

DRY CLOTHES

CONTINUOUS

AUTOMATIC

OPERATION

HIGH

MID.

LOW

RH% Hr.

SETTING

TIMER MODE STAND-BY

171820 19

A

B

21

22

23

24

25

__RP89301_B4.book Seite 2 Freitag, 19. April 2013 7:28 19

2

GB

Contents

1. Overview ........................................................................................ 3

2. Intended purpose ............................................................................ 4

3. Safety information ........................................................................... 5

4. Items supplied ................................................................................. 6

5. How to use ...................................................................................... 7

6. Notes on operation .......................................................................... 7

7. Operation ........................................................................................ 7

7.1 Switching on and off ............................................................................. 7

7.2 Displays............................................................................................... 8

7.3 Modes of operation............................................................................... 8

7.4 Water tank........................................................................................... 9

7.5 Timer................................................................................................... 9

8. Hose drainage ............................................................................... 10

9. Cleaning and replacing the filter .................................................... 10

10. Cleaning ........................................................................................ 10

11. Protection against overheating ...................................................... 11

12. Storage ......................................................................................... 11

13. Trouble-shooting ............................................................................ 11

14. Disposal ........................................................................................ 12

15. Technical specifications .................................................................. 12

16. Warranty of the HOYER Handel GmbH ........................................... 13

__RP89301_B4.book Seite 2 Freitag, 19. April 2013 7:28 19

3

GB

1. Overview

1 Mobile flap valve for air outlet

2 Operating panel

3 Handle

4 Recessed grip for water tank

5 Water tank (5 L)

6 Rollers

7 Inspection window for checking water level

8 Grid for air inlet (removable)

9 Hook for coiling up the power cable

10 Power cable with safety plug

11 Rating plate

12 TANK FULL LED illuminates when water tank is full

13 HIGH/MID./LOW Display for the selected humidity and switch-off time

14 Modes of operation LEDs display the active mode

15 OPERATION LED illuminates during operation

16 STAND-BY Switch the device on and off

17 MODE Switch between the 4 modes

18 RH%HR/ SETTING Set humidity and timer

19 TIMER Switch the timer on and off

20 TIMER LED illuminates when timer is active

21 Fastener for connecting the hose (Remove the fastener with a screwdriver. Remove

plug and connect hose)

22 Hose

23 Plug

24 Plastic filter

25 Carbon filter

__RP89301_B4.book Seite 3 Freitag, 19. April 2013 7:28 19

4

GB

Thank you for your trust!

Congratulations on your new dehumidifier.

For a safe handling of the product and in or-

der to get to know the entire scope of fea-

tures:

• Thoroughly read these operat-

ing instructions prior to initial

commissioning.

• Above all, observe the safety in-

structions!

• The device should only be used

as described in these instruc-

tions.

• Keep these instructions for refer-

ence.

• If you pass the device on to

someone else, please include

these instructions.

We hope you enjoy your new dehumidifier!

2. Intended purpose

The dehumidifier is intended exclusively for

dehumidifying residential, cellar and stor-

age rooms with a temperature of between

5°C and 35 °C.

The device must only be used indoors.

This device must not be used for commercial

purposes.

Foreseeable misuse

DANGER! Risk of illness!

G The water collected is not suitable

for drinking or for watering plants.

There is a risk of illness.

DANGER! Risk of electric

shock!

Do not place the device in water /

also do not place in pools or pud-

dles of water.

WARNING! Risk of material dam-

age!

• Do not use the device in swimming

pools, washrooms, or any similar

rooms.

• The device is not intended for drying in-

sulation material. If lagging or insulat-

ing material has become damp after a

water pipe has broken, always consult

a specialist.

• Never expose the device to tempera-

tures of 0°C or lower. Residual water in

the piping could freeze and damage

the system.

• Do not use the device in environments

that are dusty or which contain chlorine.

__RP89301_B4.book Seite 4 Freitag, 19. April 2013 7:28 19

5

GB

3. Safety information

Warnings

If necessary, the following warnings will be

used in these operating instructions:

DANGER! High risk: failure to ob-

serve this warning may result in in-

jury to life and limb.

WARNING! Moderate risk: failure to ob-

serve this warning may result in injury or se-

rious material damage.

CAUTION: low risk: failure to observe this

warning may result in minor injury or mate-

rial damage.

NOTE: circumstances and specifics that

must be observed when handling the de-

vice.

Instructions for safe operation

• This device is not designed to be used by people (including chil-

dren) with limited physical, sensory or mental capabilities or peo-

ple without adequate experience and/or understanding unless they

are supervised by someone responsible for their safety or are in-

structed by them on how to use the device.

• Children must be supervised to ensure that they do not play with

the device.

• Do not install the device in a narrow space. Leave a minimum

clearance of approx. 20 cm at the rear and sides, 10 cm at the

front, and 30 cm at the top.

• The device must only be operated in rooms with a temperature of

between 5 °C to 35 °C.

• Only use the device in rooms with a size of max. 20 m

2

.

• Only connect the mains plug to a properly installed and easily ac-

cessible grounded wall socket whose voltage corresponds to the

specifications on the rating plate. The wall socket must continue to

be easily accessible after the device is plugged in.

• The appliance shall be installed in accordance with national wiring

regulations.

DANGER for children

• Packing materials are not children's

toys. Children should not be allowed to

play with the plastic bags. There is a

risk of suffocation.

• Keep the device out of the reach of chil-

dren.

DANGER of explosion

• The device must never be operated in are-

as with potentially aerosol-forming or ex-

plosive atmosphere.

DANGER! Risk of electric

shock due to moisture

• This device must never be operated close

to a bathtub, shower, filled hand basin or

similar.

__RP89301_B4.book Seite 5 Freitag, 19. April 2013 7:28 19

6

GB

• The device, the power cable and the

mains plug must not be immersed in wa-

ter or any other liquids.

• Protect the device from water drops and

water spray.

• If liquid gets into the device (except in

the water container), pull out the mains

plug immediately. Have the device

checked before reusing.

• Never touch the device with wet hands.

• If the device falls into water, disconnect

the mains plug immediately. Only then

is it safe to retrieve the device.

DANGER! Risk of electric

shock

• Ensure that the power cable cannot be

damaged by sharp edges or hot points.

Do not wrap the power cable around

the device.

• The device is not fully disconnected from

the power supply, even after it is

switched off. In order to fully disconnect

it, pull out the mains plug.

• When using the device, ensure that the

power cable cannot be trapped or

crushed.

• When removing the mains plug from the

grounded power socket, always pull on

the plug and never the cable.

• Pull the safety plug out of the grounded

power socket, …

… if there is a fault,

… when you are not using the device,

… before you clean the device, and

… during thunderstorms.

• Do not use the device if there is visible

damage to the device or the power ca-

ble.

• To avoid any risk, do not make modifi-

cations to the device. You also must not

replace the power cable yourself. Re-

pairs must be carried out by a specialist

workshop or the Service Centre.

WARNING! Risk of material damage

• Never place objects filled with liquid on

top of the device, e.g. vases.

• Heavy objects must never be placed on

the device.

• Protect the device from heat.

• The device must not be covered (e.g.

with newspapers, cushions or blankets).

• Never insert objects into the ventilation

slit.

• Open sources of ignition, e.g. burning

candles, must never be placed on or im-

mediately next to the device.

• Place the device somewhere that it will

never be exposed to direct sunlight.

• Place the device on a solid, flat surface.

• Clean the air filter before it becomes

heavily contaminated.

• When draining water through the hose,

ensure that the hose does not become

blocked, and that the open end of the

hose is lower down than the device.

• Only operate the device with the water

tank installed, or the hose attached. The

hose end must be placed over a drain.

• Only use the original accessories.

• Do not use any astringent or abrasive

cleaning agents.

• Only clean the device with a slightly

damp cloth.

4. Items supplied

1 Dehumidifier with water tank 5

1Hose 22

1 Set of operating instructions

__RP89301_B4.book Seite 6 Freitag, 19. April 2013 7:28 19

7

GB

5. How to use

• Remove all packing material.

• Remove all transport packing material.

• Strip off the foil from the operating pan-

el.

• Check to ensure that all parts are pre-

sent and undamaged.

1. Place the device on a level, dry and

solid surface.

2. Let the device rest in its working posi-

tion for about 30 minutes, so that the

coolant fluid can settle.

3. Make sure that the float at the left-hand

side of the water tank 5 can move freely.

4. Check that the water tank 5 is inserted

correctly. If it is installed incorrectly, or

if the water tank has been removed, the

LED 12 TANK FULL will illuminate.

5. Connect the mains plug 10 to a

grounded power socket.

6. Notes on operation

• If the relative humidity in residential

rooms is continuously excessive, the

cause should be found and rectified.

(Continuous ventilation - i.e. for several

years - is generally not reasonable.)

• The optimum ambient temperature for

removing humidity from the air is 5 °C

to 35 °C. Below 5 °C, the use of a de-

humidifier is not helpful, as there is only

relatively little humidity in the air.

• During operation, the room temperature

may rise by between 1 °C and 4 °C,

depending on room size. This is normal.

Automatic defrosting

In order to prevent the device from freezing

over while in continuous operation, it de-

frosts itself automatically. To do this, the de-

humidification process is interrupted, and

the motor switches to its highest setting.

The intervals at which this happens vary.

7. Operation

7.1 Switching on and off

• By pressing the button 16 STAND-BY,

you can switch the device on and off.

The corresponding LEDs illuminate or go

out.

- The device will start with the setting

last selected.

- If the device has failed due to a pow-

er outage, has been disconnected

from the mains power or stopped by

the overheating protection system, it

will start in the AUTOMATIC mode.

• If a timer has been set, the device will

shut down after the time has run out (1-

12 hours).

• If a value has been set for relative hu-

midity in the CONTINUOUS mode, the

device will stop when the value has

been reached, and re-start when the val-

ue is exceeded again.

• The device switches off when the water

tank is full or has been removed.

Conditions

Defrosting

Temperature:

over 20 °C

no defrosting

Temperature:

12 °C to 20 °C

after 40 minutes dehu-

midification,

8 minutes defrosting

Temperature:

5 °C to 12 °C

after 25 minutes dehu-

midification,

10 minutes defrosting

Temperature:

under 5 °C

operation not possible

__RP89301_B4.book Seite 7 Freitag, 19. April 2013 7:28 19

8

GB

Air outlet flap valve

Figure B: irrespective of which mode the

device is being operated in, open the top

flap valve 1. It clicks into place in four posi-

tions.

If the flap valve is not opened, the overheat-

ing protection will switch the device off after

a while for approx. 3 minutes.

7.2 Displays

The mode of operation LEDs 14 and the dis-

play 13 show the selected functions and the

humidity range.

Mode of operation LEDs

Display

7.3 Modes of operation

NOTE: the values selected for relative hu-

midity (RH%) are recognised with an up-

wards or downwards deviation of approx.

3%. This is necessary so that the device does

not constantly switch on and off.

• The device has 4 different modes avail-

able.

• By pressing the button 17 MODE, you

can switch between the modes.

• The mode of operation LED 14 next to

the active mode illuminates.

AUTOMATIC

The setting for the target relative humidity

(RH) is fixed at 55%. The compressor dehu-

midifies until this value has been reached,

and will then switch off. When the relative

humidity rises again, the compressor switch-

es on again.

In this mode, the device operates in 3 differ-

ent stages:

- RH over 70%: the device dehumidifies

at its highest setting.

LED illuminated

Meaning

TANK FULL

The water tank is

full or has not been

inserted.

TIMER

A switch-off time is

activated.

AIR CLEAN

DRY CLOTHES

CONTINUOUS

AUTOMATIC

Selected mode

OPERATION

The device is

switched on.

Display

Meaning

This display can be seen

continuously during oper-

ation. It shows the humid-

ity range in the room:

LOW: under 65%

MID: 65% to 75%

HIGH: over 75%

MID.

LOW

HIGH

MID.

LOW

HIGH

MID.

LOW

HIGH

1 - 12

flash for 5 sec.

Timer for all modes:

These values (1 - 12 hours)

will flash for 5 seconds

when you use the arrow

keys to select a switch-off

time.

30 - 80 or CO

flash for 5 sec.

Set relative humidity in

continuous operation.

Values between 30 and

80 or CO will flash for

5seconds when

selected.

CO: The device dehu-

midifies continuously.

Display

Meaning

__RP89301_B4.book Seite 8 Freitag, 19. April 2013 7:28 19

9

GB

- RH between 55% and 70%: the device

dehumidifies at its normal setting.

- RH under 55%: no dehumidification,

only the fan is running.

NOTE: the relative humidity values of the

automatic system are not identical to the val-

ues HIGH/MID./LOW on the display 13.

Select this mode for continuous dehumidifi-

cation to a pleasant relative humidity of 55%.

CONTINUOUS

In the CONTINUOUS mode, you can set the

relative humidity in 5% increments to be-

tween 30% and 80%. The device dehumidi-

fies at a low level until the set value has been

reached, and then deactivates itself. When

the relative humidity rises again, the device

switches on again.

- 30 - 80%: setting for the desired relative

humidity in the room.

- CO: the device dehumidifies continu-

ously.

Select this mode for continuous dehumidifi-

cation, or for dehumidification to a value

that you have set.

DRY CLOTHES

You can use this mode in order to dry damp

clothes or shoes faster. The device dehumid-

ifies at its highest setting. Shift the flap

valve1 of the air outlet in such a way that

the jet of air is directed towards the items of

clothing to be dried.

AIR CLEAN

No dehumidification takes place with this

mode. The room air is drawn in through the

filter in front of the air inlet, and is cleaned

there.

7.4 Water tank

• The water tank 5 has a holding capaci-

ty of 5 litres.

• The water level can be checked using

the inspection window 7 in the front.

• The device can only be operated with

the water tank in place.

• When the water tank 5 is full, the TANK

FULL LED 12 starts flashing. The device

switches off after a few seconds. An

alarm sounds for approx. 20 seconds.

The TANK FULL LED 12 flashes until the

tank has been emptied.

1. Figure A: in order to empty the water

tank 5, pull it out slightly on the left and

right-hand sides, and then carry it by

the handle 3.

2. Pour the water out and place the tank

back in the device.

7.5 Timer

• The timer can be combined with all

4modes.

• There are 12 switch-off times that can

be selected, from 1 to 12 hours.

• After the expiry of the time that has

been set, the device is shut down and

the timer function is terminated.

1. During operation, press the TIMER 19

button. The TIMER LED 20 will flash.

2. Use the arrow keys

18

to select a switch-

off time of between 1 to 12hours. The

selected time flashes in the display

13

for 5 seconds and is then saved.

• If you want to end the timer earlier than

the set time, press TIMER 19 twice or

switch the device off by pressing

STAND-BY 16.

__RP89301_B4.book Seite 9 Freitag, 19. April 2013 7:28 19

10

GB

8. Hose drainage

In the case of very damp rooms, it is often

more reasonable for the water not to be col-

lected in the water tank, but to be dis-

charged directly through a hose.

WARNING! During hose drainage, the de-

vice runs in continuous mode. This means

that the water collected must be able to

drain reliably, otherwise puddles will form

on the floor.

1. Figure C: use a screwdriver to remove

the fastener 21 on the rear.

2. Remove the plug 23.

3. Figure C: place the hose 22 included

in the box over the opening.

4. Place the device in a position where

the end of the hose is over a drain. It is

essential here that the open end of the

hose is lower down than the drain out-

let on the device (i.e. the hose must run

at a downward angle).

5. Switch the device on as described

above and select a mode.

6. If you wish to drain into the water

tank5 again, switch the device off, re-

move the hose 22, and replace the

plug 23 firmly over the opening.

9. Cleaning and

replacing the filter

The performance of the device also depends

on the cleanliness of the filter.

• The carbon filter 25 should be cleaned

every 2 weeks and replaced every

6months. Clean the filter by brushing

or vacuum suction.

• The normal plastic filter 24 should be

washed every 2 weeks.

1. Switch the device off and pull out the

mains plug 10.

2. Figure D: reach into the upper open-

ing of the grid 8 and pull it off.

3. Rotate grid 8 and press, if necessary

with both thumbs, in the middle of the

grid.

4. The plastic filter 24 and the carbon fil-

ter 25 come loose from the grid. Re-

move them from the grid 8.

5. Rinse out both filters with lukewarm wa-

ter. (The carbon filter 25 should be re-

placed after approx. 6 months.)

6. Allow both filters to dry completely.

7. Place the filters into the grid 8.

8. Place the grid onto the device.

NOTE: new carbon filters are available in

almost all household goods shops. The pads

just need to be cut to size.

10. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric

shock!

• Pull the mains plug 10 out of the

grounded power socket before you

clean the device.

• The device, the power cable and the

mains plug 10 must not be immersed in

water or any other liquids.

WARNING! Risk of material dam-

age! Do not use any astringent or abrasive

cleaning agents.

• Wipe the housing and the power ca-

ble10 with a damp cloth if necessary.

• Remove the water tank 5, pour out the

water, and dry the tank well inside and

outside before re-inserting it into the de-

vice.

__RP89301_B4.book Seite 10 Freitag, 19. April 2013 7:28 19

11

GB

11. Protection against

overheating

The device has an overheating protection

system.

• The overheating protection system will

switch the device off automatically if

there is a risk of overheating.

• It is then impossible to switch the device

on again for 3 minutes.

• After approx. 3 minutes, the device

starts automatically.

• Check whether external conditions

could have triggered the overheating

protection system, e.g. temperature

above 35 °C or a closed flap valve 1

over the air outlet.

12. Storage

DANGER for children! Keep the

device out of the reach of children.

• Always store the device in an upright

position.

• Select a location where neither high

temperatures nor moisture can affect the

device.

13. Trouble-shooting

If your device fails to function as required,

please try this checklist first. Perhaps there is

only a minor problem, and you can solve it

yourself.

DANGER! Risk of electric

shock! Do not attempt to repair

the device yourself under any cir-

cumstances.

Fault Possible causes/Action

No function.

• Has the device been

connected to the power

supply?

• Check the water level in

the water tank 5.

• Check the position of

the water tank.

• The overheating protec-

tion system has

switched the device off.

Wait for approx. 3 min-

utes.

The dehumid-

ification

does not

seem to be

working very

well.

• Are the filters 24, 25

dirty?

• Is the air inlet 8

blocked?

• The temperature is low.

• Is the device operating

in AIR CLEAN mode?

No dehumidification

takes place with this

program.

• Is a window open, or

has steam been generat-

ed in the room?

Excessive

noise.

• Is the device standing

on a level, solid sur-

face?

Occasion-

ally the

device stops

working.

• Room temperature

above 35°C?

• Room temperature be-

low 5°C?

• Defrosting mode is ac-

tive.

Damp cloth-

ing is not

drying, or is

only drying

very slowly.

• Is the air flow from the

device directly pointed

at the damp clothing?

• Is the room temperature

too low?

__RP89301_B4.book Seite 11 Freitag, 19. April 2013 7:28 19

12

GB

14. Disposal

The symbol showing a wheel-

ie bin crossed through indi-

cates that the product requires

separate refuse collection in

the European Union. This ap-

plies to the product and all ac-

cessories marked with this

symbol. Products identified with this symbol

may not be discarded with normal house-

hold waste, but must be taken to a collection

point for recycling electric and electronic ap-

pliances. Recycling helps to reduce the con-

sumption of raw materials and protect the

environment.

Packaging

When disposing of the packaging, make

sure you comply with the environmental reg-

ulations applicable in your country.

15. Technical

specifications

Subject to technical modification.

Model: SLE 420 A1

Mains voltage

: 220 - 240 V~ 50 Hz

Protection class: I

Input power: 320 W (27 °C 60%)

Power rating max.:

420 W

(35 °C 90%)

Nominal current: 1,39 A (27 °C 60%)

Power consump-

tion:

max.1.82 A

(35 °C 90%)

Dehumidification

capacity:

20 L /day (30 °C 80%)

11 L /day (27 °C 60%)

Air flow: 195 m

3

/h

Coolant /

Volume:

R134a/190g

Coolant group: L1

Water tank: 5 l

Room size: 20m

2

‚ (Rh. 2.3m)

Room

temperature: 5 - 35 °C

Weight: 12.5 kg

Dimensions: 360 x 230 x 610

WxDxH

Noise level: 48 dB(A)

Intake pressure: 0,5 MPa

Exhaust pressure: 1,5 MPa

__RP89301_B4.book Seite 12 Freitag, 19. April 2013 7:28 19

13

GB

16. Warranty of the

HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year war-

ranty starting with the purchase date. In the

event of product defects, you are entitled to

statutory rights against the vendor. These

statutory rights are not restricted by our war-

ranty presented in the following.

Warranty conditions

The warranty period starts with the purchase

date. Please keep the original purchase re-

ceipt in a safe place. This document is re-

quired to verify the purchase.

If within three years from the purchase date

of this product a material or factory defect

occurs, the product will be repaired or re-

placed by us – at our discretion – free of

charge to you. This warranty implies that

within the period of three years the defective

device and the purchase receipt are present-

ed, including a brief written description of

the defect and the time it occurred.

If the defect is covered by our warranty, the

repaired or a new product will be returned

to you. No new warranty period starts with

a repair or replacement of the product.

Warranty period and statutory

claims for defects

The warranty period is not extended when

the warranty has been claimed. This also ap-

plies to replaced and repaired parts. Any

damages and defects already existing at the

time of purchase must be reported immedi-

ately upon unpacking. Repairs arising after

the expiration of the warranty period are

subject to a charge.

Warranty coverage

The device was produced carefully according

to strict quality guidelines and tested diligent-

ly prior to delivery.

The warranty applies to material or factory

defects. This warranty does not include prod-

uct parts that are subject to standard wear

and therefore can be considered wear parts;

the same applies to damages at fragile parts,

e.g. switches, rechargeable batteries or parts

made of glass.

This warranty expires if the product is dam-

aged, not used as intended or not serviced.

For the proper operation of the product, all in-

structions listed in the operating instructions

must be observed carefully. Any form of use

and handling that is advised against in the

operating instructions or warned against

must always be avoided.

The product is only intended for private and

not for commercial use. In the case of incor-

rect and improper treatment, use of force and

interventions not performed by our author-

ised Service Centre, the warranty shall cease.

Handling in case of a warranty

claim

In order to ensure prompt processing of your

matter, please observe the following notes:

• Please keep the article number

IAN: 89301

and the purchase receipt

as a purchase verification for all inquiries.

• If faulty operation or other defects occur,

first contact the Service Centre listed in

the following by telephone or email.

• Then, you are able to send a product re-

ported as defective free of charge to the

service address specified to you, includ-

ing the purchase receipt and the infor-

mation on the defect and when it

occurred.

Please visit www.lidl-service.com to

download this and many other

manuals, product videos and soft-

ware.

__RP89301_B4.book Seite 13 Freitag, 19. April 2013 7:28 19

14

GB

Service Centre

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [email protected]

IAN: 89301

Supplier

Please note that the following address is no

service address. First contact the afore-

mentioned Service Centre.

HOYER Handel GmbH

Kühnehöfe 5

22761 Hamburg

Germany

GB

IE

__RP89301_B4.book Seite 14 Freitag, 19. April 2013 7:28 19

15

GB

__RP89301_B4.book Seite 15 Freitag, 19. April 2013 7:28 19

16 PL

Spis treci

1. Przegld......................................................................................... 17

2. Uycie zgodne z przeznaczeniem .................................................... 18

3. Wskazówki bezpieczestwa........................................................... 19

4. Zakres dostawy ............................................................................. 21

5. Uruchomienie ................................................................................. 21

6. Wskazówki dotyczce eksploatacji................................................. 21

7. Obsuga ......................................................................................... 22

7.1 Wczanie i wyczanie....................................................................... 22

7.2 Wskaniki........................................................................................... 22

7.3 Programy............................................................................................ 23

7.4 Zbiornik na wod ................................................................................ 24

7.5 Timer.................................................................................................. 24

8. Odprowadzanie wody z wa........................................................ 24

9. Czyszczenie i wymiana filtra........................................................... 25

10. Czyszczenie .................................................................................... 25

11. Ochrona przed przegrzaniem ......................................................... 25

12. Przechowywanie ............................................................................ 26

13. Rozwizywanie problemów ........................................................... 26

14. Utylizacja ....................................................................................... 27

15. Dane techniczne.............................................................................. 27

16. Gwarancja firmy HOYER Handel GmbH .......................................... 28

__RP89301_B4.book Seite 16 Freitag, 19. April 2013 7:28 19

17PL

1. Przegld

1 Ruchoma klapa wylotu powietrza

2 Panel obsugi

3 Rczka

4 Uchwyt do zbiornika na wod

5 Zbiornik na wod (5 l)

6 Waki

7 Okienko wziernikowe do kontroli poziomu wody

8 Kratka wlotu powietrza (zdejmowana)

9 Haki do nawijania przewodu zasilajcego

10 Przewód zasilajcy z wtyczk ze stykiem ochronnym

11 Tabliczka znamionowa

12 TANK FULL Dioda LED wieci si, gdy zbiornik na wod jest peny

(ZBIORNIK PENY)

13 HIGH/MID./LOW

(WYS./R./NIS.) Wywietlacz do wskazywania wybranej wilgotnoci

powietrza i czasu wyczenia

14 Programy Diody LED sygnalizuj aktywny program

15 OPERATION

(DZIAANIE) Dioda LED wieci si w czasie pracy

16 STAND-BY

(GOTOWO) Wcza i wycza urzdzenie

17 MODE (TRYB) Przecza pomidzy 4 programami

18 RH%HR/ SETTING

(RH%HR/ USTAWIENIE) Programowanie wilgotnoci powietrza i timera

19 TIMER Wczanie i wy

czanie zegara sterujcego

20 TIMER Dioda LED wieci si, gdy timer jest wczony

21 Zamknicie przycza wa (zamknicie zdejmuje si rubokrtem; wyj korek i

podczy w)

22 W

23 Korek

24 Filtr z tworzywa sztucznego

25 Filtr wglowy

__RP89301_B4.book Seite 17 Freitag, 19. April 2013 7:28 19

18 PL

Serdecznie dzikujemy

za zaufanie!

Gratulujemy Pastwu zakupu nowego osu-

szacza powietrza.

Aby móc bezpiecznie posugiwa si pro-

duktem i pozna cay zakres jego moliwo-

ci:

• Przed pierwszym uruchomie-

niem naley dokadnie

przeczyta niniejsz instrukcj

obsugi.

• Naley przede wszystkim

przestrzega wskazówek

bezpieczestwa!

• Urzdzenie wolno obsugiwa

wycznie w sposób opisany w

niniejszej instrukcji.

• Instrukcj naley zachowa do

póniejszego uycia.

• W przypadku dalszego przeka-

zania urzdzenia naley

doczy do niego instrukcj

obsugi.

yczymy Pastwu duo zadowolenia z no-

wego osuszacza powietrza!

2. Uycie zgodne z

przeznaczeniem

Osuszacz powietrza jest przeznaczony wy-

cznie do osuszania pomieszcze mieszkal-

nych, piwnic i magazynów o temperaturze

od 5 °C do 35 °C.

Z urzdzenia mona korzysta wycznie w

pomieszczeniach zamknitych.

Niniejsze urzdzenie nie moe by uywa-

ne do celów przemysowych.

Przewidywalne uycie niezgodne z

przeznaczeniem

NIEBEZPIECZESTWO

wywoania choroby!

Zgromadzona woda jest niezdatna

do picia ani podlewania rolin. Ist-

nieje zagroenie dla zdrowia.

NIEBEZPIECZESTWO

poraenia prdem elektrycz-

nym!

Nie wolno wstawia urzdzenia

do wody, ani te stawia w kau-

ach wody.

OSTRZEENIE przed szkodami mate-

rialnymi!

• Nie wolno uywa urzdzenia na base-

nach, w aniach lub podobnych po-

mieszczeniach.

• Urzdzenie nie jest przeznaczone do

osuszania izolacji. Jeli wskutek pkni-

cia rury dojdzie do zawilgocenia izola-

cji lub materiau izolujcego, naley na

wszelki wypadek zasign opinii spe-

cjalisty.

• Nigdy nie wolno wystawia urzdzenia

na dziaanie temperatur poniej 0 stop-

ni Celsjusza. Woda pozostajca w

przewodach mogaby zamarzn i

uszkodzi ukad.

• Nie wolno stosowa

 urzdzenia w ro-

dowisku zapylonym ani zawierajcym

chlor.

__RP89301_B4.book Seite 18 Freitag, 19. April 2013 7:28 19

Stránka sa načítava ...

Silvercrest SLE 420 A1 Operating Instructions Manual

Silvercrest SLE 420 A1 Operating Instructions Manual

V iných jazykoch

Súvisiace články

Ďalšie dokumenty