Panasonic SCPT175 Návod na obsluhu

[EP]

RQTX0241-R

Operating Instructions

Instrukcja obsługi

Návod k obsluze

DVD Home Theater Sound System

Zestaw kina domowego z odtwarzaczem DVD

Systém zvuku domácího kina s DVD pâehrávaçem

Model No. SC-PT170

SC-PT175

until

2009/02/25

The illustrations shown may differ from your unit.

Urzdązenie pokazane na ilustracjach może się różnić od zakupionego urządzenia.

Uvedené ilustrace se mohou od vašeho přístroje lišit.

Region number/Numer regionu/Číslo regionu

The player plays DVD-Video marked with labels containing the region number “2” or “ALL”.

Odtwarzacz obsługuje płyty DVD-Video z numerami regionów „2“ lub „ALL“.

Přehrávač přehrává disky DVD-Video označené štítky s číslem regionu „2“ nebo „ALL“.

Example/Przykład/Příklad:

2 ALL

3

5

2

The illustration shows SC-PT170.

Na rysunku przedstawiono model SC-PT170.

Obrázek představuje model SC-PT170.

SC-PT170-175EP-RQTX0241-R_eng.book Page 1 Wednesday, February 4, 2009 12:19 PM

2

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Dear customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read

the instructions completely.

Please keep this manual for future reference.

Indicates features applicable to:

Accessories

Please check and identify the supplied accessories.

Operations in these instructions are described mainly with the

remote control, but you can perform the operations on the main

unit if the controls are the same.

[PT170] : SC-PT170 [PT175] : SC-PT175

System SC-PT170 SC-PT175

Main unit SA-PT170 SA-PT170

Front speakers SB-HF170 SB-HF175

Center speaker SB-HC170 SB-HC175

Surround speakers SB-HS170 SB-HS175

Subwoofer SB-HW170 SB-HW170

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND

SIMILAR ITEMS.

≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please

increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily

accessible.

The mains plug of the power supply cord shall remain readily

operable.

To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from AC receptacle.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

(Back of product)

(Inside of product)

∏ 1 Remote control

(N2QAYB000366)

∏ 2 Remote control batteries

∏ 1 FM indoor antenna

 [PT170]

4 Speaker cables

[PT175]

2 Speaker cables

∏ 1 AC mains lead

∏ 1 Sheet of speaker cable stickers

∏ [PT175] 2 Speaker stands (with cable)

 [PT175] 2 Bases

 [PT175] 8 Screws

2

SC-PT170-175EP-RQTX0241-R_eng.book Page 2 Wednesday, February 4, 2009 12:19 PM

3

Getting StartedPlaying DiscsOther OperationsReference

RQTX0241

ENGLISH

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Quick Start Guide

step 1 Assembling the front speakers [PT175] . . . . . 4

step 2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

step 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Speaker connections. . . . . . . . . . . . . . . . . . . . . .6

Radio antenna connections. . . . . . . . . . . . . . . . .6

Audio and video connections . . . . . . . . . . . . . . .7

step 4 AC mains lead connection. . . . . . . . . . . . . . . 8

step 5 Preparing the remote control . . . . . . . . . . . . 8

step 6 EASY SETUP

. . . . . . . . . . . . . . . . . . . . . . . 9

Setting up the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 10

Confirming the preset channels. . . . . . . . . . . . . . . . . . . . . 10

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Selecting the playback source . . . . . . . . . . . . . . . . . . . . 11

Selecting the source from the START menu . . . . . . . . . . . 11

Selecting the source by the remote control . . . . . . . . . . . . 11

Playing Discs

Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Using the main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Other modes of play. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Program and Random play. . . . . . . . . . . . . . . . . . . . . . . . . 16

Using navigation menus. . . . . . . . . . . . . . . . . . . . . . . . . 17

Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Playing RAM and DVD-R/-RW (DVD-VR) discs . . . . . . . . 17

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 18

Other Operations

Using the VIERA Link “HDAVI Control

TM

” . . . . . . . . . . .20

One touch play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Auto input switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Speaker control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

VIERA Link Control only with TV’s remote control

(for “HDAVI Control 2 or later”) . . . . . . . . . . . . . . . . . . . . 21

Operating other devices . . . . . . . . . . . . . . . . . . . . . . . . . 22

Playing from an USB device . . . . . . . . . . . . . . . . . . . . . . . 22

Playing from MUSIC PORT . . . . . . . . . . . . . . . . . . . . . . . . 22

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . .23

DivX information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . . 25

Speaker installation option . . . . . . . . . . . . . . . . . . . . . . .26

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Discs that can be played . . . . . . . . . . . . . . . . . . . . . . . . .28

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . 34

Enjoying sound from all

speakers and various sound

effects

Enjoying surround sound effects . . . . . . . . . . . . . . 12

Selecting sound mode . . . . . . . . . . . . . . . . . . . . . . . 12

Whisper-mode Surround . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the speaker output level manually . . . . 13

3

SC-PT170-175EP-RQTX0241-R_eng.book Page 3 Wednesday, February 4, 2009 12:19 PM

4

RQTX0241

Quick Start Guide

Getting Started

ENGLISH

Preparation

≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.

≥ For assembly, use a Phillips-head screwdriver (not included).

≥ You will need to obtain the appropriate screw eyes to match the walls

or pillars to which they are going to be fastened.

≥ Consult a qualified housing contractor concerning the appropriate

procedure when attaching to a concrete wall or a surface that may not

have strong enough support. Improper attachment may result in

damage to the wall or speakers.

Caution

Do not stand on the base. Be cautious when children are near.

step 1 Assembling the front speakers [PT175]

Speaker assembly option

Make sure you have all the indicated components before starting assembly, setup, and connection.

≥ Keep the screws out of reach of children to prevent swallowing.

≥ For optional wall mount, refer to page 26.

2 Front speakers

2 Stands (with cable)

2 Bases 8 Screws

2

1

2

1

Slide into the groove.

Tighten securely.

Position the cable

between the ridges.

Press into the groove.

Leave about 90 mm.

Tighten securely.

Insert the wire fully.

i: White

j: Blue

Push!

Press into the groove.

Push!

Insert the wire fully.

i: White

j: Blue

Tighten securely.

Leave about

100 mm.

You can remove and use the

cable from the stand. To reattach

the cable, refer page 26.

Thread the speaker cable through

the base.

Attach the speaker.

Slide into the

groove.

Preventing the speakers from falling

String (not included)

Thread from the wall to the speaker and tie tightly.

Rear of the

speaker

Screw eye

(not included)

Wall

Approx.

150 mm

DO

NOT

4

SC-PT170-175EP-RQTX0241-R_eng.book Page 4 Wednesday, February 4, 2009 12:19 PM

5

RQTX0241

Getting Started

Quick Start Guide

ENGLISH

How you set up your speakers can affect the bass and the sound field.

Note the following points:

≥ Place speakers on flat secure bases.

≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 26.

[Note]

Keep your speakers at least 10 mm away from the system for proper ventilation.

Setup example

Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are

approximate.

Notes on speaker use

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be

negatively affected.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound.

– When the speakers are reverberating due to a record player, noise

from FM broadcasts, or continuous signals from an oscillator, test

disc, or electronic instrument.

– When adjusting the sound quality.

– When turning the unit on or off.

If irregular colouring occurs on your TV

The center speaker is designed to be used close to a TV, but the picture

may be affected with some TVs and setup combinations.

If this occurs, turn the TV off for about 30 minutes.

The demagnetising function of the TV should correct the problem. If it

persists, move the speakers further away from the TV.

Caution

Do not touch the front netted area of the speakers. Hold by the sides.

e.g. [PT170] Center speaker

step 2 Positioning

Subwoofer Front speakers

e.g. [PT170]

Center speaker

e.g. [PT170]

Main unit

Surround speakers

e.g. [PT170]

To allow for proper ventilation and to maintain

good airflow around the main unit, position it with

at least 5 cm of space on all sides.

Put on a rack or shelf. Vibration caused by the

speaker can disrupt the picture if it is placed

directly on the TV.

Place to the right or left of the

TV, on the floor or a sturdy

shelf so that it will not cause

vibration. Leave about 30 cm

from the TV.

Caution

≥ The main unit and supplied speakers are to be used only as

indicated in this setup. Failure to do so may lead to damage to

the amplifier and/or the speakers, and may result in the risk of

fire. Consult a qualified service person if damage has occurred

or if you experience a sudden change in performance.

≥ Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

DO

NOT

5

SC-PT170-175EP-RQTX0241-R_eng.book Page 5 Wednesday, February 4, 2009 12:19 PM

6

RQTX0241

Quick Start Guide

Getting Started

ENGLISH

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are complete.

Setup example

Pay attention to the type of speaker and the connector colour when you place the speakers.

Connect to the terminals of the same colour.

Use of the speaker cable stickers is convenient when making cable connections.

step 3 Connections

1

Speaker connections

Main unit

CENTERSUBWOOFER FRONT

6 5 2 1 4 3

L

R

L

R

SURROUND

FM ANT

(75 )

2

1

SPEAKERS

CENTERSUBWOOFER FRONT

6 5 2 1 4 3

L

R

L

R

SURROUND

Main unit

Lch

SURROUND

3

WHITE

FRONT

(L)

BLUE

SURROUND

(L)

GREY

SURROUND

(R)

RED

FRONT

(R)

GREEN

CENTER

PURPLE

SUBWOOFER

● Be careful not to cross

(short circuit) or reverse

the polarity of the

speaker wires as doing

so may damage the

speakers.

Insert the wire fully, taking

care not to insert beyond the

wire insulation.

: White

: Blue

Push!

DO

NOT

e.g. Surround speaker (L)

Speaker cable sticker (included)

e.g. [PT170]

2

Radio antenna connections

Using an indoor antenna

FM ANT

(75 )

Adhesive tape

Main unit

FM indoor antenna

(included)

Affix this end of the antenna

where reception is best.

Using an outdoor antenna

FM ANT

(75 )

Main unit

FM outdoor antenna

[Using a TV antenna

(not included)]

The antenna should be

installed by a competent

technician.

75  coaxial cable

(not included)

Use outdoor antenna if FM radio reception is poor.

≥ Disconnect the antenna when the unit is not in use.

≥ Do not use the outdoor antenna during an electrical storm.

6

SC-PT170-175EP-RQTX0241-R_eng.book Page 6 Wednesday, February 4, 2009 12:19 PM

7

RQTX0241

Getting Started

Quick Start Guide

ENGLISH

Basic setup example

[Note]

≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be displayed properly.

≥ Only one video connection is required. Choose one of the video connections above depending on your TV.

≥ If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV

output should then be connected to the AUX or OPTICAL IN terminal of the main unit.

Main unit

OPTICAL

IN

AUX

L

R

AV

3

Audio and video connections

Other video connection

TV terminal

Cable required

(not included)

Main unit terminal Features

[Note]

If there is more than

one HDMI terminal,

refer to the operating

instructions for the TV

to determine which

terminal to connect to.

[Note]

≥ Non-HDMI-compliant cables

cannot be utilized.

≥ It is recommended that you use

Panasonic’s HDMI cable.

Recommended part number:

RP-CDHG15 (1.5 m),

RP-CDHG30 (3.0 m),

RP-CDHG50 (5.0 m), etc.

[\\\\\\\\\\\HDMI\\\\\\\\\\\] This connection provides the best picture quality.

≥ Set “VIDEO PRIORITY” to “ON” (B 24, HDMI menu).

≥ Set “VIDEO FORMAT” in Menu 4 (HDMI) (B 19).

VIERA Link “HDAVI Control”

If your Panasonic TV is VIERA Link compatible, you

can operate your TV synchronising with home theater

operations or vice versa (B 20, Using the VIERA Link

“HDAVI Control

TM

”).

≥ Make the extra audio connection (B below) when you

use

VIERA Link “

HDAVI Control

”

function.

AV1

AV2

AV OUT

AV

Scart cable

(not included)

TV (not included)

Main unit

Scart cable

(not included)



Set top box (STB) or VCR

(not included)

§

This connection will also enable you to play TV audio through your

home theater system (B 11, Selecting the source by the remote

control). Select the appropriate audio out (e.g. Monitor) on the TV.

To improve picture quality, you can change the video signal output from

the SCART (AV) terminal to suit the type of TV you are using.

≥ Select “S-VIDEO”, “RGB 1” or “RGB 2” from “VIDEO OUT – SCART”

in VIDEO menu (B 24).

≥ When both the HDMI cable and scart cable are connected, there will

be no RGB output from the SCART (AV) terminal.

AV IN

HDMI cable

Other audio connections

TV or external

equipment

terminal

Cable required

(not included)

Main unit terminal Features

≥ Do not bend sharply when

connecting.

[\\\\\\OPTICAL\IN\\\\\\] This is the preferred connection for best sound and true

surround sound.

This unit can decode the surround signals received

from your TV, cable or satellite STB. Refer to the

operating instructions for the TV, cable or satellite STB

for the settings necessary to output its audio from the

digital audio output to your home theater system. Only

Dolby Digital and PCM can be played with this

connection.

≥ After making this connection, make settings to suit the

type of audio from your digital equipment (B 11).

[\\\\\\\\\\\AUX\\\\\\\\\\\] This connection enables you to play audio from your

TV, STB or VCR through your home theater system

(B 11, Selecting the source by the remote control).

OPTICAL OUT

Optical digital audio cable

OPTICAL

IN

AUDIO

OUT

L

R

Audio cable

AUX

L

R

7

SC-PT170-175EP-RQTX0241-R_eng.book Page 7 Wednesday, February 4, 2009 12:19 PM

8

RQTX0241

Quick Start Guide

Getting Started

ENGLISH

Conserving power

The main unit consumes a small amount of power, even when it is in

standby mode (approx. 0.2 W). To save power when the unit is not to be

used for a long time, unplug it from the household mains socket.

You will need to reset some memory items after plugging in the main

unit.

[Note]

The included AC mains lead is for use with the main unit only.

Do not use it with other equipment. Also, do not use cords for other

equipment with the main unit.

Do not:

≥ mix old and new batteries.

≥ use different types of batteries at the same time.

≥ take apart or short circuit.

≥ attempt to recharge alkaline or manganese batteries.

≥ use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a

long period of time. Store in a cool, dark place.

Aim at the remote control signal sensor (B 35), avoiding obstacles, at a

maximum range of 7 m directly in front of the unit.

step 4 AC mains lead connection

AC IN

Main unit

To household mains socket

AC mains lead (included)

step 5 Preparing the remote control

Batteries

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

R6/LR6, AA

Insert so the poles ( and ) match those in the remote control.

Press in and lift up.

Replace the cover.

≥ Use alkaline or manganese batteries.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

Use

8

SC-PT170-175EP-RQTX0241-R_eng.book Page 8 Wednesday, February 4, 2009 12:19 PM

9

RQTX0241

Getting Started

Quick Start Guide

ENGLISH

The Easy setup screen assists you in making necessary

settings.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Speaker output

Make surround sound setting for speaker output.

≥TV audio

Select the audio input connection from your TV.

For AUX connection (B 7): Select “AUX”.

For OPTICAL IN connection (B 7): Select “DIGITAL IN”.

This will be the TV audio setting for VIERA Link “HDAVI Control”. (

B

20)

[Note]

≥ If this unit is connected to a “HDAVI Control 3 or later” compatible TV

via HDMI cable, the menu language and TV aspect information will be

retrieved via VIERA Link.

≥ If this unit is connected to a “HDAVI Control 2” compatible TV via

HDMI cable, the menu language information will be retrieved via

VIERA Link.

≥ Settings in the Easy setup can also be changed in the player settings

[e.g. language, TV aspect, speaker level and TV audio (B 23)].

step 6 EASY SETUP

Preparation

Turn on your TV and select the appropriate

video input mode (e.g. VIDEO 1, AV 1, HDMI,

etc.) to suit the connections to this unit.

≥ To change your TV’s video input mode, refer

to its operating instructions.

≥ This remote control can perform some basic

TV operations (B 34).

1

Turn on the unit.

≥ When the Easy setup screen appears

automatically, skip step 2 to 6.

2

Select “DVD/CD”.

3

Show the setup menu.

4

Select “OTHERS”.

5

Select “EASY SETUP”.

6

Select “SET”.

7

Select “Yes”.

8

Follow the messages and

make the settings.

(B right, Easy setup settings)

9

Finish Easy setup.

DVD

OK

SETUP

OK

SETUP

DVD

-

CH SELECT

SETUP

SET

MAIN

DISC

VIDEO

AUDIO

DISPLAY

HDMI

OTHERS

EXIT : SETUP

RETURN

Menu

OK

Easy setup settings

9

SC-PT170-175EP-RQTX0241-R_eng.book Page 9 Wednesday, February 4, 2009 12:19 PM

10

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Setting up the radio

Up to 30 stations can be set.

≥ “SET OK” is displayed when the stations are set, and the radio tunes to

the last preset station.

≥ “ERROR” is displayed when automatic presetting is unsuccessful.

Preset the channels manually (B right).

≥ The FM setting is also shown on the TV display.

Press and hold the button again to cancel the mode.

≥ The mode is also cancelled when you change the frequency.

Up to 30 stations can be set.

A station previously stored is overwritten when another station is stored in

the same channel preset.

Presetting stations automatically

1

Select “FM”.

≥ Main unit:

Press [SELECTOR].

2

Each time you press the button:

LOWEST (factory preset):

To begin auto preset with the lowest

frequency.

CURRENT:

To begin auto preset with the current

frequency.

§

To change the frequency, refer to “Manual

tuning” (B right).

3

(press and hold)

Release the button when

“FM AUTO” is displayed.

≥ Main unit:

Press and hold [MEMORY].

The tuner starts to preset all the stations it

can receive into the channels in ascending

order.

1 2 3

4 5 6

7 8

0

9

SEARCH SEARCH

OK

EXT-IN

RADIO

10

MENU

SKIP SKIP

,

SEARCH

Numbered

buttons

RADIO

OK

PLAY MODE

MENU

,

PLAY MODE

SELECTOR

TUNE

MEMORY

-TUNE MODE/—FM MODE

EXT-IN

RADIO

MENU

PLAY

LIST

OK

Confirming the preset channels

1

Select “FM”.

≥ Main unit:

Press [SELECTOR].

2

Select the channel.

≥ To select a 2-digit number

e.g. 12: [S10] B [1] B [2]

Alternatively, press [X, W].

≥ Main unit:

Press [-TUNE MODE] to select “PRESET”

on the display, and then press

[X TUNE W] to select the channel.

When a stereo FM broadcast is being

received, “ST” lights in the display.

If noise is excessive

Press and hold [PLAY MODE]

(main unit: [—FM MODE]) to

display “MONO”.

Manual tuning

1

Select “FM”.

≥ Main unit:

Press [SELECTOR].

2

Select the frequency.

≥ Main unit:

Press [-TUNE MODE] to select “MANUAL”

on the display, and then press

[X TUNE W] to select the frequency.

≥ To start automatic tuning, press and hold

[6, 5] (main unit: [X TUNE W]) until

the frequency starts scrolling. Tuning

stops when a station is found.

Presetting stations manually

1 While listening to the radio broadcast

Press [OK].

2 While the frequency is flashing on the display

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10] B [1] B [2]

Alternatively, press [X, W],

and then press [OK].

Main unit:

1 While listening to the radio broadcast

Press [MEMORY] twice.

2 While a channel number is flashing on the display

Press [X TUNE W], and then press [MEMORY].

EXT-IN

RADIO

1 2 3

4 5 6

7 8

0

9

10

ST

MONO

EXT-IN

RADIO

SEARCH SEARCH

10

SC-PT170-175EP-RQTX0241-R_eng.book Page 10 Wednesday, February 4, 2009 12:19 PM

11

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Selecting the playback source

You can select sound effects, desired source, or access playback/menus

by using the START menu.

When “Input Selection” is selected

You can select a desired source from the menu.

≥ DVD/CD (B 9), FM (B 10), AV (B right), AUX

§

(B right),

DIGITAL IN

§

(B right), USB (B 22), MUSIC PORT (B 22)

§

“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV

audio setting for VIERA Link “HDAVI Control” (B 20).

When “Sound” is selected

You can select sound quality settings (B 12, Equalizer).

When a disc is loaded or an USB device is connected, you can also

access playback or menus from the START menu.

e.g. [DVD-V]

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

You can operate the playback with the indicated controls.

Press [SELECTOR] on the main unit to select source from the main unit.

(B 35)

[Note]

Confirm the audio connection to the SCART (AV), AUX or OPTICAL IN

terminal on the main unit when you select the corresponding sources

(B 7). Reduce the volume on the TV to its minimum, and then adjust the

volume of the main unit.

Select to suit the type of audio from the OPTICAL IN terminal on the main

unit.

(When receiving true 5.1-channel surround sound, select “PCM OFF”.)

[Note]

≥ Audio that is input through the OPTICAL IN terminal is not output from

the HDMI terminal.

≥ Underlined items in the above paragraphs are factory settings.

Selecting the source from the START menu

1

Show the START menu.

This unit automatically turns on.

(The TV also turns on when using VIERA Link

“HDAVI Control”. This works only when in

“DVD/CD” or “USB” mode without any disc/

device being loaded/connected.)

e.g.

2

Select an item.

≥ To exit, press [START].

3

Make the setting.

OK

DVD

USB

EXT-IN

RADIO

S

T

A

R

T

SETUP

DVD

USB

START

RADIO, EXT-IN

OK

SETUP

S

T

A

R

T

DVD/CD Home Cinema

OK

RETURN

Input Selection

Sound

OK

DVD/CD Home Cinema

OK

RETURN

Input Selection

Sound

Playback Disc

TOP MENU (DVD)

MENU (DVD)

Playback/menu access

Selecting the source by the remote control

DVD/CD (B 9)

Each time you press the button:

FM (B 10)

AV:

AUX

§

:

D-IN

§

:

MUSIC P.:

For audio input through the

SCART (AV) terminal.

For audio input through the AUX

terminal.

For audio input through the

OPTICAL IN terminal. (B below)

For audio input through MUSIC

PORT. (B 22)

§

“(TV)” will appear beside “AUX” or

“D-IN”, indicating the TV audio setting for

VIERA Link “HDAVI Control” (B 20).

USB (B 22)

Making settings for digital audio input

1 While in “D-IN” mode

Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.

2 While the selected mode is displayed

Press [3, 4] to make the setting.

MAIN/SAP mode (Only works with Dolby Dual Mono):

MAIN, SAP

§

, MAIN+SAP

§

(stereo audio)

§

“SAP” = Secondary Audio Program

Dynamic Range Compression

DRC ON: Adjust for clarity even when the volume is low by

compressing the range of the lowest sound level and the

highest sound level. Convenient for late night viewing.

(Only works with Dolby Digital)

DRC OFF

: The full dynamic range of the signal is reproduced.

PCM FIX mode

PCM ON: Select when receiving only PCM signals.

PCM OFF

: Select when receiving Dolby Digital and PCM signals.

DVD

EXT-IN

RADIO

USB

11

SC-PT170-175EP-RQTX0241-R_eng.book Page 11 Wednesday, February 4, 2009 12:19 PM

12

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Enjoying sound from all speakers and various

sound effects

≥ The following sound effects may not be available or may have no effect

with some sources.

≥

You may experience a reduction in sound quality when these sound effects

are used with some sources. If this occurs, turn the sound effects off.

§

“ÎPLII” lights in the main unit’s display when there is effect.

Except [DivX]

You can enhance the surround effect for low volume 5.1-channel sound.

(Convenient for late night viewing.)

Enjoying surround sound effects

SURROUND OUTPUT indicator on the main

unit will light up when there is surround sound

effect.

Each time you press the button:

STANDARD:

Sound is output as it was recorded/encoded.

Speaker output varies depending on the

source.

MULTI-CH:

You can enjoy sound from the front speakers,

as well as the surround speakers even when

playing a 2-channel sound or non-surround

sound.

MANUAL: (B below)

While “MANUAL” is

displayed

Select other surround modes.

Each time you press [2, 1]:

PLII MOVIE

§

Suitable for movie software, or softwares

recorded in Dolby Surround. (except [DivX])

PLII MUSIC

§

Adds 5.1-channel effects to stereo sources.

(except [DivX])

S.SRND

You can enjoy sound from all speakers with

stereo sources. (Surround output will be in

mono.)

STEREO

Sound will only be output to the front

speakers and the subwoofer from any source.

Recommended modes to enjoy TV audio or stereo

sources from all speakers:

≥ PLII MOVIE

≥ PLII MUSIC

≥ S.SRND

OK

SOUND

SURROUND

-

CH SELECT

SETUP

W.SRD

VOL

OK

SOUND

SURROUND

-

CH SELECT

SETUP

W.SRD

OK

+, VOL

SETUP,

—CH SELECT

SURROUND

SOUND

W.SRD

SURROUND

Selecting sound mode

1

Select a sound mode.

Each time you press the button:

EQ: Equalizer

SUBW LVL: Subwoofer Level

C.FOCUS: Center Focus

2

While the selected

mode is displayed

Make settings.

Refer to the following for setting details of

each sound effect.

Equalizer

You can select sound quality settings.

Each time you press [2, 1]:

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

SOFT: For background music.

FLAT: Cancel (no effect is added).

Subwoofer level

You can adjust the amount of bass. The unit automatically

selects the most suitable setting according to the type of

playback source.

SUB W 1

,#

SUB W 2

,#

SUB W 3

,#

SUB W 4

^-------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

Center Focus

(Effective when playing audio containing center channel

sound or when “ÎPLII” lights in the main unit display.)

You can make the sound of the center speaker seem like it is

coming from within the TV.

C.FOCUS ON,------.C.FOCUS OFF

Whisper-mode Surround

≥ “(( ))” lights when there is effect.

Each time you press the button:

WHISPER-MODE SRD ON



WHISPER-MODE SRD OFF

SOUND

W.SRD

12

SC-PT170-175EP-RQTX0241-R_eng.book Page 12 Wednesday, February 4, 2009 12:19 PM

13

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Preparation

≥ To display the picture, turn on the TV and select the appropriate video

input mode.

≥ Press [r, s VOL] to adjust the volume to normal listening level.

≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu

(B 24).

(Effective when playing 5.1-channel sound or when “ÎPLII” lights.)

Adjusting the speaker output level manually

1

Enter test tone mode.

Test tone will be output to each channel in the

following order.

LEFT, CENTER, RIGHT,

SURROUND RIGHT, SURROUND LEFT

2

Adjust the speaker level for each

speaker. (CENTER, SURROUND

RIGHT, SURROUND LEFT)

`

6dB to

i

6 dB (Factory preset: 0 dB)

≥ To exit the screen, press [SETUP].

To adjust speaker level during play

1 Press and hold [—CH SELECT] to select the speaker.

While the speaker channel is displayed, press [—CH SELECT].

L# C# R# RS# LS# SW

^---------------------------------------------}

≥ You can adjust SW (Subwoofer) only if the disc includes a

subwoofer channel and “ÎPLII” is not lit.

≥

“S” appears on the main unit’s display when you have selected

“S.SRND” (

B 12

, Enjoying surround sound effects). In this case, you

can adjust both surround speaker levels at the same time using

[3, 4]

.

S: `6dB to i6dB

2 Press [3] (increase) or [4] (decrease) to adjust the speaker level

for each speaker.

C, RS, LS, SW: `6dB to i6dB

(L, R: Only the balance is adjustable.)

To adjust the balance of the front speakers, while “L” or “R” is selected,

press [2, 1].

OK

e.g.

SET

RETURN

AUDIO-SPEAKER SETTINGS-TEST TONE

SPEAKER

LEFT

CENTER

RIGHT

SURROUND RIGHT

SURROUND LEFT

TRIM LEVEL

− −

0dB

− −

0dB

EXIT : SETUP

OK

13

SC-PT170-175EP-RQTX0241-R_eng.book Page 13 Wednesday, February 4, 2009 12:19 PM

14

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Basic play

Preparation

To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

[Note]

≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.

To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are finished with the menus.

≥ Total title number may not be displayed properly on iR/iRW.

≥ ABOUT DIVX VIDEO:

DivX

®

is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.

If you are experiencing problems, refer to troubleshooting (B 30 to 31)

Using the main unit

TUNE

SELECTOR

VOLUME

TUNE

3

4

5

, + VOLUME

OPEN CLOSE

21

SELECTOR

MEMORY

(Stop)

Start play.

≥ Turn [s, r VOLUME] to

adjust the volume.

Select “DVD/CD”.Turn on the unit.

Press to skip.

Press and hold to:

– search during play

– start slow-motion play during

pause

≥ Press [1] (Play) to start

normal play.

Open the disc tray.

Load the disc.

≥ Load double-sided discs

so the label for the side

you want to play is facing

up.

≥ For DVD-RAM,

remove the disc from

its cartridge before

use.

Label facing up

14

SC-PT170-175EP-RQTX0241-R_eng.book Page 14 Wednesday, February 4, 2009 12:19 PM

15

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using the remote control

One touch

play

(during standby

mode)

(Remote control only)

The main unit automatically turns

on and starts playing the disc in the

tray.

Stop

The position is memorised while

“RESUME STOP” is on the screen.

≥ Press [1 PLAY] to resume.

≥ Press [∫ STOP] again to clear

the position.

Pause

≥ Press [1 PLAY] to restart play.

Skip

Search

(during play)

≥ Up to 5 steps.

≥ Press [1 PLAY] to start normal

play.

Slow-motion

(during pause)

≥ [VCD] Slow-motion: Forward

direction only.

≥ [MPEG4] [DivX]

Slow-motion: Does

not work.

Frame-by-

frame

(during pause)

[DVD-VR] [DVD-V] [VCD]

≥ [DVD-VR] [VCD] Forward direction

only.

RETURN

VOL

STOP

1 2 3

4 5 6

7 8

0

9

SEARCH

SKIP

SLOW

SKIP

PLAY

PAU SE

SEARCH

OK

DVD

T

O

P

M

E

N

U

10

&

+

4

'

%

6



0

#

8

+

)

#

6

1

4

PLAY

LIST

MENU

FL DISPLAY

1

2

5

SLOW, SEARCH

,

SKIP

PAUSE

STOP

OK

RETURN

MENU, PLAY LIST

FL DISPLAY

TOP MENU,

DIRECT NAVIGATOR

Numbered

buttons

+, VOL

PLAY

STOP

PAUSE

SKIP SKIP

—

SEARCH

SLOW

SEARCH

OK

On-screen

item select

Enter number

[DVD-VR] [DVD-V] [VCD] [CD]

e.g. To select 12:

[S10] B [1] B [2]

[VCD] with playback control

Press [∫ STOP] to cancel the PBC

function, and then press the

numbered buttons.

Disc menu

[DVD-V]

Shows a disc top menu.

[DVD-VR]

Press the button to show the

programs (B 17).

[DVD-V]

Shows a disc menu.

[DVD-VR]

Press the button to show a play list

(B 17).

[VCD] with playback control

Shows a disc menu.

Return to

Main unit

display

[DVD-VR] [DVD-V] [WMA] [MP3]

[MPEG4] [DivX]

Time display

,-. Information display

(e.g. [DVD-VR] Program

number)

[JPEG]

SLIDE

,-.Contents number

OK

Select

Confirm

—

1 2 3

4 5 6

7 8

0

9

10

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

PLA

Y

LIST

MENU

RETURN

—

-

SLEEP

FL DISPLA

Y

15

SC-PT170-175EP-RQTX0241-R_eng.book Page 15 Wednesday, February 4, 2009 12:19 PM

16

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other modes of play

This works only when the elapsed play time can be displayed. It also

works with all JPEG content.

Items shown differ depending on the type of disc and playback mode.

Preparation

≥ [DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

≥ If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or

“VIDEO” (B 17, Using PLAYBACK MENU), then proceed with the

above.

≥ For a disc with both WMA/MP3 and JPEG contents, select either music

or picture contents.

WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.

JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”.

≥ [DVD-V] Some items cannot be played even if you have programmed

them.

To select all the items

Press [3, 4] to select “ALL” and press [OK].

To clear the selected program

1Press [1] and then press [3, 4] to select the program.

2Press [CANCEL].

To clear the whole program

Press [1] several times to select “CLEAR ALL”, and then press [OK].

The whole program is also cleared when the disc tray is opened, the unit

is turned off or another source is selected.

Repeat play

During play

Select an item to be repeated.

e.g. [DVD-V]

`TITLE ---. `CHAP. ---. `OFF

^----------------------------------------------------b

To cancel, select “OFF”.

Program and Random play

[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]

While stopped

Select the play mode.

Program and random playback screens appear

sequentially.

Program ------------------------------------------) Random

^--- Exit program and random screens (}

RETURN

PLAY

OK

CANCEL

PLAY MODE

REPEAT

OK

RETURN

CANCEL

PLAY

REPEAT

PLAY MODE

REPEAT

PLAY MODE

Program play (up to 30 items)

1

Select an item.

e.g. [DVD-V]

≥ Repeat this step to program other items.

≥ To return to the previous menu, press

[RETURN].

2

Start play.

Random play

1

(Only when the disc has groups or multiple

titles.)

Select a group or title.

e.g. [DVD-V]

≥ “¢” represents selected. To deselect,

press [OK] again.

2

Start play.

OK

DVD-V PROGRAM

SELECT TITLE

TITLE CHAPTER

TITLE 1

TITLE 2

TITLE 3

TITLE 4

1

2

3

4

5

6

7

8

9

10

START:PLAY

CLEAR ALL

PLAY

OK

DVD-V RANDOM

SELECT TITLE

PRESS PLAY TO START

TITLE 1

TITLE 2

TITLE 3

PLAY

16

SC-PT170-175EP-RQTX0241-R_eng.book Page 16 Wednesday, February 4, 2009 12:19 PM

17

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using navigation menus

[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

“PLAYBACK MENU” screen appears when the disc contains both video

(MPEG4/DivX) and other format (WMA/MP3/JPEG).

You can select to play from your desired item while the “DATA-DISC”

screen is displayed.

e.g.

≥ To display/exit the screen, press [MENU].

Play starts from the selected content.

∫ Selecting the picture in Thumbnail menu

[JPEG]

To go to other group

1 Press [3] to select the group name.

2 Press [2, 1] to select the group and press [OK].

≥ Titles appear only if the titles are recorded on the disc.

≥ You cannot edit programs, play lists and disc titles.

This works only when the disc contains a play list.

Playing data discs

[WMA] [MP3] [JPEG] [MPEG4] [DivX]

Using PLAYBACK MENU

Select “AUDIO/PICTURE” or “VIDEO”.

≥ To start play, press [1 PLAY].

≥ To select an item to play, refer “Playing from

the selected item” (B below).

Playing from the selected item

Select an item.

≥ Press [2, 1] to skip page by page.

≥ To return to 1 level up from the current folder,

press [RETURN].

≥ Maximum: 28 characters for file/folder name.

RETURN

STOP

SKIP SKIP

PLAY

OK

T

O

P

M

E

N

U

&

+

4

'

%

6



0

#

8

+

)

#

6

1

4

PLAY

LIST

MENU

,

SKIP

OK

RETURN

MENU, PLAY LIST

TOP MENU,

DIRECT NAVIGATOR

PLAY

OK

PLAYBACK MENU

WMA/MP3/JPEG

MPEG4/DivX

AUDIO/PICTURE

VIDEO

OK

DATA-DISC

ROOT

OK

RETURN

Perfume

My favorite1

My favorite2

My favorite3

Underwater

Fantasy planet

Starpersons1

Starpersons2

Group (Folder):

Content (File):

: WMA/MP3

: JPEG

: MPEG4/DivX

OK

1

While picture is

displayed

e.g.

2

Select a picture.

≥ Press [:, 9 SKIP] to skip page by

page.

Playing RAM and DVD-R/-RW (DVD-VR) discs

[DVD-VR]

Playing the programs

1

While stopped e.g.

≥ To exit the screen, press [DIRECT

NAVIGATOR].

2

Select the program.

≥ Press [2, 1] to skip page by page.

Playing a play list

1

While stopped e.g.

≥ To exit the screen, press [PLAY LIST].

2

Select the play list.

≥ Press [2, 1] to skip page by page.

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

JPEG images G 1/ 1:C 3/ 9

Group name

Group and content

number

OK

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

PG

DATE

LENGTH

TITLE

1

0:16:02

10/11

LIVE CONCERT

02:15

2

0:38:25

12/05

AUTO ACTION

3

1:16:05

04/03

CINEMA

02:10

01:30

OK

RETURN

OK

PLA

Y

LIST

MENU

PL

DATE

LENGTH

TITLE

1

0:00:10

11/11

CITY PENGUIN

00:01

2

0:01:20

12/01

FOOTBALL

3

1:10:04

01/02

SPECIAL

01:10

01:20

OK

RETURN

OK

17

SC-PT170-175EP-RQTX0241-R_eng.book Page 17 Wednesday, February 4, 2009 12:19 PM

18

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using on-screen menus

1

Show the on-screen

menu.

Each time you press the button:

Menu 1 (Disc/Play)

Menu 2 (Video)

Menu 3 (Audio)

Menu 4 (HDMI)

Exit

2

Select the item.

3

Make the settings.

4

Exit.

RETURN

1 2 3

4 5 6

7 8

0

9

PLAY

OK

F

U

N

C

T

I

O

N

S

10

CANCEL

OK

RETURN

FUNCTIONS

CANCEL

Numbered

buttons

PLAY

F

U

N

C

T

I

O

N

S

T

1

C1

1:ENG

3/2.

1 :E

OFF

TITLE SEARCH

Current item

Item name

e.g. Menu 1 (Disc/Play) [DVD-V]

OK

T

1

C 1

1:ENG

3/

1

OFF

CHAPTER SEARCH

Current setting

e.g. Menu 1 (Disc/Play) [DVD-V]

OK

RETURN

Items shown differ depending on the type of disc.

Menu 1 (Disc/Play)

TRACK SEARCH

TITLE SEARCH

CONTENT SEARCH

CHAPTER SEARCH

PG SEARCH

(Program

Search)

PL SEARCH

(Playlist Search)

To start from a specific item

≥ [VCD] This does not work when using playback

control.

e.g. [DVD-V]: T2 C5

To select numbers for data disc

e.g. 123: [S10] B [1] B [2] B [3] B [OK]

AUDIO

[DVD-V] [DivX] (with multiple soundtracks)

To select audio soundtrack

[DVD-VR] [VCD]

To select “L”, “R”, “L+R” or “L R”

[DVD-V] (Karaoke disc)

To select “ON” or “OFF” for vocals

To select “OFF”, “V1”, “V2” or “V1+V2” for

vocal selections

Actual operations depend on the disc. Read the

disc’s instructions for details.

Signal type/data

LPCM/PPCM/ D/DTS/MP3/MPEG: Signal

type

kHz (Sampling frequency)/bit/ch (Number of

channels)

≥ [DivX] It may take some time for play to start if

you change the audio on a DivX video disc.

PLAY SPEED

[DVD-VR] [DVD-V]

To change play speed

– from “k0.6” to “k1.4” (in 0.1-unit steps)

≥ Press [1 PLAY] to return to normal play.

≥ After you change the speed

– Dolby Pro Logic II has no effect.

– Audio output switches to 2-channel stereo.

– Sampling frequency of 96 kHz is converted to

48 kHz.

≥ This function may not work depending on the

disc’s recording.

REPEAT MODE

(B 16, Repeat play)

A-B Repeat (To repeat a specified section)

Except [JPEG] [MPEG4] [DivX] [DVD-VR]

(Still picture part) [VCD] (SVCD)

Press [OK] at the starting and ending points.

≥ Select “OFF” to cancel.

SUBTITLE

[DVD-V] [DivX] (with multiple subtitles)

[VCD] (SVCD only)

To select subtitle language

≥ On iR/iRW, a subtitle number may be shown

for subtitles that are not displayed.

[DVD-VR] (with subtitle on/off information)

To select “ON” or “OFF”

≥ This may not work depending on the disc.

[DivX] (B 25, Displaying DivX subtitles text)

ANGLE

[DVD-V] (with multiple angles)

To select a video angle

3/2 .1ch

.0: No surround

.1: Mono surround

.2: Stereo surround (left/right)

.1: Low frequency effect

(not displayed if there is no signal)

.1: Center

.2: Front leftiFront right

.3: Front leftiFront rightiCenter

e.g.

18

SC-PT170-175EP-RQTX0241-R_eng.book Page 18 Wednesday, February 4, 2009 12:19 PM

19

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Confirming HDMI information

1 Connection status

2 Shows the output signal type.

3 Shows the number of audio channels.

4 (B above, VIDEO FORMAT)

5 (B above, COLOUR SPACE)

[Note]

When “OFF” is selected in “AUDIO OUT” (B 24, HDMI menu), “– – –” will

be displayed in “AUDIO STREAM”.

DATE DISPLAY

[JPEG] To select “ON” or “OFF” for picture’s

date display

ROTATION

To rotate a picture (during pause)

[JPEG]:

0,------. 90,------.180,------.270

^--------------------------------------------J

Menu 2 (Video)

PICTURE MODE

NORMAL

CINEMA1:

CINEMA2:

DYNAMIC:

ANIMATION:

Mellows images and enhances

detail in dark scenes.

Sharpens images and enhances

detail in dark scenes.

Enhances the contrast for

powerful images.

Suitable for animation.

ZOOM

To select zoom sizes

NORMAL, AUTO (

[DVD-VR]

[DVD-V] [VCD]

),

k

2,

k

4

≥ [JPEG]: during pause

TRANSFER

MODE

If you have chosen “480p”/“576p”/“720p”/“1080p”

(progressive), “1080i” (interlaced)

[“VIDEO FORMAT” in Menu 4 (HDMI)], select the

method of conversion for progressive output to

suit the type of material.

≥ The setting will return to “AUTO” or “AUTO1”

when the disc tray is opened, the unit is turned

off or another source is selected.

When playing PAL discs

AUTO:

VIDEO:

FILM:

Automatically detects the film and

video content, and appropriately

converts it.

Select when using “AUTO”, and

the content is distorted.

Select this if the

edges of the film

content appear

jagged or rough

when “AUTO” is

selected.

However, if the video content is

distorted as shown in the

illustration to the right, then select

“AUTO”.

When playing NTSC discs

AUTO1:

AUTO2:

VIDEO:

Automatically detects the film and

video content, and appropriately

converts it.

In addition to “AUTO1”,

automatically detects film

contents with different frame rates

and appropriately converts it.

Select if the video content is

distorted when using “AUTO1” or

“AUTO2”.

SOURCE

SELECT

[DivX]

When you select “AUTO” the constructing

method of the DivX contents is automatically

distinguished and output. If the picture is

distorted, select “INTERLACE” or

“PROGRESSIVE” depending on which

constructing method was used when the contents

were recorded to disc.

AUTO, INTERLACE, PROGRESSIVE

JPG

DATE

Menu 3 (Audio)

DIALOGUE

ENHANCER

To make the dialogue in movies easier to hear

[DVD-V] (Dolby Digital, DTS, 3-channel or higher,

with the dialogue recorded in the center channel)

[DivX] (Dolby Digital, 3-channel or higher, with the

dialogue recorded in the center channel)

OFF, ON

Menu 4 (HDMI)

HDMI STATUS

To show HDMI information.

(B below, Confirming HDMI information)

HD ENHANCER

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 24, HDMI

menu) set to “ON”.

To sharpen the “720p”, “1080i” and “1080p”

picture quality

OFF, 1 (weakest) to 3 (strongest)

VIDEO FORMAT

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 24, HDMI

menu) set to “ON”.

To select suitable picture quality with your TV

(Video recordings will be converted to, and output

as, high-definition video.)

§

480p/576p/720p/1080p (progressive)

§

480i/576i/1080i (interlaced)

≥ If the picture is distorted, press and hold

[CANCEL] until the picture is displayed

correctly. (The output will return to “480p”/

“576p”.)

§

The numbers displayed depend on the disc

being played. One of the above numbers is

displayed.

COLOUR SPACE

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 24, HDMI

menu) set to “ON”.

To select suitable picture colour with your TV

YCbCr 4:2:2

YCbCr 4:4:4

RGB

≥ If the setting above is not compatible with your

TV, it will not be displayed.

e.g.

HDMI

H D M I --- I N F O R M ATION

CONNECTED STATE

AUDIO STREAM

MAX CHANNEL

VIDEO FORMAT

COLOUR SPACE

CONNECTED

PCM

2ch

720p

YCbCr 4:4:4

1

2

3

4

5

19

SC-PT170-175EP-RQTX0241-R_eng.book Page 19 Wednesday, February 4, 2009 12:19 PM

20

RQTX0241

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other Operating

Using the VIERA Link “HDAVI Control

TM

”

VIERA Link “HDAVI Control”

VIERA Link “HDAVI Control” is a convenient function that offers linked

operations of this unit, and a Panasonic TV (VIERA) under “HDAVI

Control”. You can use this function by connecting the equipment with the

HDMI cable. See the operating instructions for connected equipment for

operational details.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC (Consumer

Electronics Control), is a unique function that we have developed and

added. As such, its operation with other manufacturers’ equipment that

supports HDMI CEC cannot be guaranteed.

≥ This unit supports “HDAVI Control 4” function.

“HDAVI Control 4” is the newest standard (current as of December,

2008) for Panasonic’s HDAVI Control compatible equipment. This

standard is compatible with Panasonic’s conventional HDAVI

equipment.

≥ Please refer to individual manuals for other manufacturers’ equipment

supporting VIERA Link function.

The TV with “HDAVI Control 2 or later” function enables the following

operation: VIERA Link Control only with TV’s remote control (for

“HDAVI Control 2 or later”) (B 21).

Preparation

≥ Confirm that the HDMI connection has been made (B 7).

≥ Set “VIERA Link” to “ON” (B 24, HDMI menu).

≥ To complete and activate the connection correctly, turn on all VIERA

Link “HDAVI Control” compatible equipment and set the TV to the

corresponding HDMI input mode for this unit.

Whenever the connection or settings are changed, reconfirm the points

above.

(Available when using VIERA Link “HDAVI Control” with

“HDAVI Control 3 or later” compatible TV)

This function automatically provides synchronised audio and video

output. (This works only when the source is “DVD/CD”, “USB”, “AUX” or

“D-IN”.)

≥ When using “DVD/CD” or “USB” as the source, set “TIME DELAY” in

VIDEO menu to “0 ms/AUTO” (B 23).

You can turn on this unit and the TV, and start playing the disc with a

single press of a button.

[Note]

Playback may not be immediately displayed on the TV. If you miss the

beginning portion of playback, press [:] or [6] to go back to where

playback started.

≥ When you switch the TV input to TV tuner mode, this unit will

automatically switch to “AUX”

§

or “D-IN”

§

.

≥ When this unit is in “DVD/CD” mode, the TV will automatically switch its

input mode for this unit.

≥ When playback stops ([DVD-V] [VCD]) or when this unit turns off, the TV

will automatically return to TV tuner mode.

≥ When you select

“AUX”

§

or “DIGITAL IN”

§

from “Input Selection” in

START menu (B 11), the TV will automatically switch to TV tuner mode.

When the TV is turned off, this unit goes into standby mode automatically.

To continue audio playback even when the TV is turned off, select

“VIDEO” (B 24, “POWER OFF LINK” in HDMI menu).

[Note]

≥ When you press [Í], only this unit turns off. Other connected equipment

compatible with VIERA Link “HDAVI Control” stays on.

≥ If this unit is connected to a “HDAVI Control 4” compatible TV with the

“Intelligent Auto Standby” setting activated on the TV, the main unit will

be automatically turned to standby under the following conditions:

e.g.,

For details, refer also to the operating instructions for your TV.

Setting the TV audio for VIERA Link “HDAVI Control”

Select “AUX” or “DIGITAL IN” to work with the linked operations.

Refer to TV audio setting in Easy setup (B 9) or “TV AUDIO” in HDMI

menu (B 24).

Confirm the audio connection to the AUX terminal (for “AUX”) or

OPTICAL IN terminal (for “DIGITAL IN”) (B 7).

§

“AUX” or “D-IN” (“DIGITAL IN”) works depending on the TV audio

setting (B above, Setting the TV audio for VIERA Link “HDAVI

Control”).

SEARCH

SKIP

PLAY

SEARCH

SKIP

PLAY

Auto lip sync

One touch play

During standby mode (Remote control only)

Start disc playback.

This unit’s speakers will be automatically

activated (B 21).

Auto input switching

Power off link

– when changing the TV input from the one the main unit is

connected to

– when changing the speaker use from this unit’s speakers to the

TV speakers

PLAY

20

SC-PT170-175EP-RQTX0241-R_eng.book Page 20 Wednesday, February 4, 2009 12:19 PM

Stránka sa načítava...

Panasonic SCPT175 Návod na obsluhu

Tento návod je vhodný aj pre

Panasonic SCPT175 Návod na obsluhu

v iných jazykoch

Súvisiace články

Ostatné dokumenty