Panasonic SCPT880EP Návod na obsluhu

Kategória
Blu-Ray prehrávače
Typ
Návod na obsluhu

Táto príručka je tiež vhodná pre

[EP]
RQTX1111-1R
Operating Instructions
Návod k obsluze
Instrukcja obsługi
Használati útmutató
DVD Home Theater Sound System
Systém zvuku domácího kina s DVD pâehrávaçem
Zestaw kina domowego z odtwarzaczem DVD
DVD házimozi hangrendszer
Model No. / Model č. / Nr Modelu / Típusszám SC-PT580
SC-PT880
until
2009/01/28
Dear customer
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read
the instructions completely.
Please keep this manual for future reference.
The illustrations shown may differ from your unit.
Vážený zákazníku
Děkujeme za zakoupení tohoto výrobku. Pro dosažení optimálního
výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.
Před zapojením, obsluhou nebo nastavením tohoto výrobku si
přečtěte celý tento návod.
Návod uschovejte k pozdějšímu použití.
Uvedené ilustrace se mohou od vašeho přístroje lišit.
Szanowny Nabywco
Dziękujemy za zakupienie tego produktu. Aby zapewnić optymalną pracę
urządzenia i jego bezpieczną obsługę, należy dokładnie przeczytać
niniejszą instrukcję.
Przed podłączeniem, użytkowaniem lub regulacją produktu należy
przeczytać całą instrukcję obsługi.
Należy zachować tę instrukcję obsługi na przyszłość.
Urzdązenie pokazane na ilustracjach może siężnić od
zakupionego urządzenia.
Tisztelt Vásárló!
Köszönjük, hogy termékünket választotta. A biztonság és a készülék
optimális teljesítménye érdekében kérjük, hogy figyelmesen olvassa el a
használati útmutatót!
A készülék csatlakoztatása, üzembe helyezése és beállítása előtt
kérjük, figyelmesen olvassa végig a használati útmutatót.
Kérjük, őrizze meg ezt az útmutatót.
Az útmutatóban látható ábrák eltérhetnek az Ön készülékétől.
Region number/Číslo regionu/Numer regionu/Régiókód
The player plays DVD-Video marked with labels containing the
region number “2” or “ALL”.
Přehrávač přehrává disky DVD-Video označené štítky s číslem
regionu “2” nebo “ALL”.
Odtwarzacz obsługuje płyty DVD-Video z numerami regionów “2” lub
ALL”.
A DVD lejátszó a megfelelő régiókóddal “2” vagy “ALL” jelzéssel
jelölt DVD-Video lemezeket játssza le.
Example/Příklad/Przykład/Például:
2 ALL
3
5
2
This illustration shows SC-PT580.
Obrázek představuje model SC-PT580.
Na rysunku przedstawiono model SC-PT580.
A képen az SC-PT580 típusú készülék látható.
SC-PT580-880EP-RQTX1111-R_eng.book Page 1 Tuesday, January 19, 2010 9:07 AM
2
RQTX1111
Indicates features applicable to/Označuje funkce, které platí pro/Podane cechy stosują się/Az alábbi jelzések az adott készülékkel használható
funkciókat jelölik:
[PT580] : SC-PT580 only/pouze model SC-PT580/
wyłącznie do modelu SC-PT580/SC-PT580
[PT880] : SC-PT880 only/pouze model SC-PT880/
wyłącznie do modelu SC-PT880/SC-PT880
System/Systém/Zestaw/Rendszer SC-PT580 SC-PT880
Main unit/Hlavní jednotka/Główne urządzenie/Készülék SA-PT580 SA-PT880
Speaker system/Reproduktorový
systém/System głośników/
Hangszóró rendszer
Front speakers/Čelní reproduktory/Głośniki przednie/
Első hangsugárzók
SB-HF330 SB-HF330
Center speaker/Centrální reproduktor/Głośnik centralny/
Középcsatorna hangsugárzó
SB-HC230 SB-HC230
Surround speakers/Prostorové reproduktory/Głośniki
dźwięku przestrzennego/Háttér hangsugárzók
SB-HS230 SB-HS880
Subwoofer/Subwoofer/Głośnik niskotonowy/Extra mélysugárzó SB-HW330 SB-HW330
These operating instructions are applicable to models SC-PT580 and SC-PT880. Unless otherwise indicated, illustrations in these
operating instructions are of SC-PT580.
Please note that the actual controls and components, menu items, etc. of your DVD Home Theater Sound System may look
somewhat different from those shown in the illustrations in these Operating Instructions.
Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit
if the controls are the same.
Tyto pokyny k obsluze platí pro modely SC-PT580 a SC-PT880. Není-li uvedeno jinak, ilustrace v tomto návodu zobrazují model
SC-PT580.
Mějte prosím na paměti, že vlastní ovládací prvky a komponenty, položky menu apod. Vašeho systému ozvučení domácího kina
“Systém zvuku domácího kina s DVD pâehrávaçem” se mohou mírně lišit od prvků znázorněných na nákresech tohoto Návodu k
obsluze.
Popis obsluhy v tomto návodu se týká především dálkového ovladače, avšak obsluhu lze provádět také pomocí ovládacích prvků
hlavní jednotky – jestliže jsou stejné jako na ovladači.
Niniejsza instrukcja obsługi odnosi się do modeli SC-PT580 i SC-PT880. Jeżeli nie podano inaczej, ilustracje w niniejszej instrukcji
obsługi odnoszą się do SC-PT580.
W rzeczywistości przyciski i elementy, funkcje menu, etc., Zestaw kina domowego z odtwarzaczem DVD mogążnić się nieco od
tych, przedstawionych na ilustracjach niniejszej instrukcji obsługi.
W instrukcji obsługi opisano głównie czynności wykonywane z poziomu pilota, można je jednak wykonać z poziomu urządzenia
głównego, jeżeli znajdujące się tam przyciski są
takie same.
Ez a használati útmutató az SC-PT580 és SC-PT880 típusokra vonatkozik. Ha az utasításban másként nem szerepel, a jelen
útmutató illusztrációi az SC-PT580 típusra vonatkoznak.
Felhívjuk figyelmét, hogy DVD házimozi hangrendszer tényleges vezérlői és alkotórészei, menüpontjai, stb. valamelyest
eltérhetnek a jelen Használati Útmutatóban feltüntetett ábrákon láthatóktól.
A használati útmutatóban ismertetett műveletek főleg a távvezérlő használatára vonatkoznak, de ezeket a műveleteket a készülék
kezelőszerveivel ugyanúgy elvégezheti.
Accessories/Příslušenství/Akcesoria/Tartozékok
Please check and identify the supplied accessories.
Zkontrolujte a odlište dodané příslušenství.
Sprawdź załączone akcesoria.
Kérjük, ellenőrizze és azonosítsa a mellékelt tartozékokat.
1 Remote control/Dálkový ovladač/Pilot/Távvezérlő
(N2QAYB000515)
2 Remote control batteries/Baterie dálkového ovladače/Baterie pilota/Elem a távvezérlőhöz
1 FM indoor antenna/Pokojová anténa FM/Wewnętrzna antena FM/URH szobaantenna
1 AC mains lead/Sít’ový kabel/Przewód zasilania/Hálózati csatlakozókábel
1 Sheet of speaker cable stickers/Arch nálepek na kabely reproduktorů/Arkusze nalepek na kable głośnikowe/
Csomag címke a hangsugárzó kábelekhez
[PT580]
3 Speaker cables/Kabely reproduktorů/Kabel głośnikowe/rövid kábel (középcsatorna hangsugárzóhoz)
[PT880]
1 Speaker cable/Kabel reproduktoru/Kabel głośnika/hangszórókábel
[PT580]
2 Speaker stands (with cable)/Stojany reproduktorů (s kabelem)/Stojaki głośników (z kablem)/Háttér hangsugárzótartó
(kábelekkel)
[PT880]
4 Speaker stands (with cable)/Stojany reproduktorů (s kabelem)/Stojaki głośników (z kablem)/Háttér hangsugárzótartó
(kábelekkel)
[PT580]
2 Bases/Základny/Podstawy/Tartótalp
[PT880]
4 Bases/Základny/Podstawy/Tartótalp
[PT580]
8 Screws/šroubů/Wkrętów/Csavar
[PT880]
16 Screws/šroubů/Wkrętów/Csavar
2
SC-PT580-880EP-RQTX1111-R_eng.book Page 2 Monday, December 28, 2009 5:29 PM
3
RQTX1111
A Pull open / Otevřete /
Pociągnąć, aby otworzyć
/ Nyissa ki
[Note] / [Poznamka] / [Uwaga] / [Megjegyzés]
The circled numbers indicated in the operating instructions (e.g. Press [Í]1.) correspond to the circled numbers in the above.
Zakroužkovaná čísla uvedená v návodu k obsluze (např. Stiskněte [Í]1.) odpovídají zakroužkovaným číslům viz výše.
Zakreślone cyfry zaznaczone w instrukcji obsługi (np. Wciśnij [Í]1.) odnoszą się do zakreślonych cyfr w tejże instrukcji.
A használati utasításban feltüntetett bekarikázott számok (pl. Nyomja meg az [Í]1.gombot) a fenti bekarikázott számoknak felelnek meg.
RETURN
VOL
STOP
1 2 3
4 5 6
7 8
0
9
SLEEP
VOL
TV
AV
SEARCH
SKIP
SLOW
SKIP
PLAY
PAUSE
SEARCH
OK
DVD
iPod
EXT-IN
RADIO
MUTE
F
U
N
C
T
I
O
N
S
S
T
A
R
T
T
O
P
M
E
N
U
1010
EXIT
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
REPEAT
PLAY MODE
–CH SELECT
SOUND SURROUND W.SRD FL DISPLAY
CANCEL
PLAY
LIST
MENU
SELECTOR
OPEN/CLOSEVOLUME

iPod
A
3
SC-PT580-880EP-RQTX1111-R_eng.book Page 3 Monday, December 28, 2009 5:29 PM
4
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Other Panasonic audio/video equipment may start functioning when you
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control
operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same mode.
1 Press [RADIO, EXT-IN]5 to select “AUX”.
2 Press and hold [1]; on the main unit and [2] on the remote control
until the main unit’s display shows “REMOTE 2”.
3 Press and hold [OK]9 and [2] on the remote control for at least
2 seconds.
To change the mode back to “REMOTE 1”, repeat the steps above by
replacing [2] with [1].
Control reference guide
Remote control
1 Turn the main unit on/off (B 9)
2 Set the Sleep timer
Press [SLEEP].
SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120
^-------------------------- OFF (Cancel) (--------------------------}
To confirm the remaining time, press the button again.
3 Select channels and title numbers etc. / Enter numbers (B 9, 12)
4 Cancel (B 12)
5 Source select
[DVD]: Select disc as the source (B 12)
[iPod]: Select iPod/iPhone as the source (B 16)
[RADIO, EXT-IN]: Select the FM tuner or the external audio source.
(B 9, 10)
FM #AV #AUX #ARC #D-IN #USB
^-----------------------------------------------------------}
6 Basic operations for play (B 12)
7 Show a disc menu or play list (B 12, 13)
8 Show a disc top menu or program list (B 12, 13)
9 Select or confirm menu items / Frame-by-frame (B 12)
: Select the play mode / Set the repeat mode (B 12)
; Select sound mode / Select speaker channel (B 11)
< Select surround sound effects (B 11)
= TV operations
Aim the remote control at the Panasonic TV and press the button.
[Í]: Turn the TV on/off
[AV]: Change the TV’s video input mode
[r, VOL, s]: Adjust the TV volume
This may not work properly with some models.
> Adjust the volume of the main unit
? Mute the sound
“MUTE” flashes on the main unit’s display while the function is on.
To cancel, press the button again or adjust the volume.
Muting is cancelled when you switch the unit to standby.
@ Select radio stations manually (B 9)
A Select preset radio stations (B 9)
B Exit the display
C Show START menu (B 10)
D Display RDS text data / Show on-screen menu (B 9, 13)
E Return to previous screen (B 12)
F Switch information on the main unit’s display (B 12)
G Turn Whisper-mode Surround on/off (B 11)
Avoiding interference with other Panasonic equipment
Main unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2 Power indicator
The indicator lights when this unit is turned on.
3 Connect iPod/iPhone (B 16)
4 Adjust the volume of the main unit
5 Open/Close the disc tray (B 12)
6 Connect USB device (B 17)
7 Display
“SRD” lights when sound is output to the surround speakers. (B 11)
8 Remote control signal sensor
9 Stop playing
: Select the source
DVD/CD #USB #FM #AV #AUX #ARC #D-IN #IPOD
^-----------------------------------------------------------------------------------------------}
; Play disc
Language code list
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Amharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6589
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali, Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185
Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678
Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185
Rhaeto-Romance:
8277
Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8 465
Tatar : 8484
Telugu: 8 469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turk ish: 8482
Turk men : 8 475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085
4
SC-PT580-880EP-RQTX1111-R_eng.book Page 4 Monday, December 28, 2009 5:29 PM
5
Getting StartedPlaying DiscsOther OperationsReference
RQTX1111
ENGLISH
TABLE OF CONTENTS
Getting Started
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4
Quick Start Guide
step 1 Preparing the speakers . . . . . . . . . . . . . . . . . 6
step 2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
step 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Speaker connections. . . . . . . . . . . . . . . . . . . . . .7
Radio antenna connections. . . . . . . . . . . . . . . . .7
Audio and video connections . . . . . . . . . . . . . . .8
step 4 AC mains lead connection. . . . . . . . . . . . . . . 8
step 5 Preparing the remote control . . . . . . . . . . . . 8
step 6 EASY SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Listening to the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Presetting stations automatically . . . . . . . . . . . . . . . . . . . . . 9
Listening/confirming the preset channels . . . . . . . . . . . . . . . 9
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RDS broadcasting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the START menu . . . . . . . . . . . . . . . . . . . . . . . . . .10
Selecting the source by the remote control . . . . . . . . . . . . 10
Listening to the TV or other device’s audio from this
unit’s speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing Discs
Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Other modes of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Program and Random play . . . . . . . . . . . . . . . . . . . . . . . . 12
Using navigation menus. . . . . . . . . . . . . . . . . . . . . . . . . 13
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Playing DVD-R/-RW (DVD-VR) discs . . . . . . . . . . . . . . . . 13
Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 13
Other Operations
Using the VIERA Link “HDAVI Control
TM
. . . . . . . . . . . 15
What is VIERA Link “HDAVI Control” . . . . . . . . . . . . . . . . 15
What you can do with “HDAVI Control” . . . . . . . . . . . . . . . 15
Easy control only with VIERA remote control (for
“HDAVI Control 2 or later”) . . . . . . . . . . . . . . . . . . . . . . . 15
Operating other devices . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing from an USB device . . . . . . . . . . . . . . . . . . . . . . . 17
Reference
Changing the player settings . . . . . . . . . . . . . . . . . . . . . 17
DivX information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . 19
Discs that can be played. . . . . . . . . . . . . . . . . . . . . . . . . 20
Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 21
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Enjoying sound effects from all speakers
Enjoying surround sound effects. . . . . . . . . . . . . . . .11
Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . .11
Whisper-mode Surround. . . . . . . . . . . . . . . . . . . . . . .11
Adjusting the speaker output level manually . . . . . .11
Adjusting the speaker level during playback . . . . . .11
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily
accessible.
The mains plug of the power supply cord shall remain readily
operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.
5
SC-PT580-880EP-RQTX1111-R_eng.book Page 5 Monday, December 28, 2009 5:29 PM
6
RQTX1111
ENGLISH
[PT580] Front speakers
[PT880] Front and surround speakers
Preparation
To prevent damage or scratches, lay down a soft cloth to assemble
speakers.
For assembly, use a Phillips-head screwdriver (not included).
You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
Caution
Do not stand on the base. Be cautious when children are near.
When carrying the speaker, hold the stand and base parts.
step 1 Preparing the speakers
Speaker assembly option
Make sure you have all the indicated components before starting assembly, setup, and connection.
Keep the screws out of reach of children to prevent swallowing.
For optional wall mount, refer to page 21.
2 Front speakers
2 Front speakers
2 Surround speakers
2 Stands (with cable)
4 Stands (with cable)
4 Bases
2 Bases
8 Screws
16 Screws
[PT580]
[PT880]
[PT580]
[PT880]
[PT580]
[PT880]
[PT580]
[PT880]
1
2
2
1
Slide into the groove.
Tighten securely.
Position the cable
between the ridges.
Leave about 120 mm.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Leave about
120 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 21.
Slide into the
groove.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Thread the speaker cable through
the base.
Attach the speaker.
Preventing the speakers from falling
String (not included)
Thread from the wall to the speaker and tie tightly.
Speaker
(rear)
Screw eye
(not included)
Approx.
150 mm
Wall
6
SC-PT580-880EP-RQTX1111-R_eng.book Page 6 Monday, December 28, 2009 5:29 PM
7
RQTX1111
Getting Started
Quick Start Guide
ENGLISH
How you set up your speakers can affect the bass and the sound field.
Note the following points:
Place speakers on flat secure bases.
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
[Note]
Keep your speakers at least 10 mm away from the system for proper
ventilation.
Setup example (“Surround layout (Recommended)”: Standard
surround placement)
Place the front, center, and surround speakers at approximately the
same distance from the seating position. The angles in the diagram are
approximate.
§1 Position with at least 5 cm of space on all sides for proper
ventilation.
§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt
the picture if it is placed directly on the TV.
§3 Place to the right or left of the TV, on the floor or a sturdy shelf so
that it will not cause vibration. Leave about 30 cm from the TV.
Depending on the room layout, you may like to use all the speakers at
the front (“Front layout (Alternative)”) (B 9, EASY SETUP settings).
Notes on speaker use
Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the problem. If it
persists, move the speakers further away from the TV.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
Turn off all equipment before connection and read the appropriate
operating instructions.
Do not connect the AC mains lead until all other
connections are completed.
Pay attention to the type of speaker and the connector colour when you
place the speakers.
Main unit (rear)
Connect to the terminals of the same colour.
Use of the speaker cable stickers is convenient when making cable
connections.
Speakers (rear)
Insert the wire fully, taking care not to insert beyond the wire insulation.
i: White
j: Blue line
Be careful not to cross (short circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
step 2 Positioning
Caution
The main unit and supplied speakers are to be used only as
indicated in this setup. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
[PT880]
You can enjoy surround speaker sound
wirelessly when you use the optional
Panasonic wireless accessory (SH-FX71).
For details, please refer to the operating
instructions for the optional Panasonic wireless
accessory.
Center speaker
§2
Front speaker
(left)
Subwoofer
§3
Surround
speaker (left)
Surround
speaker (right)
Front speaker
(right)
Main unit
§1
step 3 Connections
1
Speaker connections
2
Radio antenna connections
Using an indoor antenna
Using an outdoor antenna
FM ANT
(75 )
Adhesive tape
Main unit (rear)
FM indoor antenna
(included)
Affix this end of the antenna
where reception is best.
FM ANT
(75 )
Use outdoor antenna if radio reception is poor.
Disconnect the antenna when the unit is not in use.
Do not use the outdoor antenna during an electrical storm.
Main unit (rear)
75 coaxial
cable
(not included)
FM outdoor antenna
(Using a TV antenna
(not included))
The antenna should be
installed by a competent
technician.
7
SC-PT580-880EP-RQTX1111-R_eng.book Page 7 Monday, December 28, 2009 5:29 PM
8
RQTX1111
ENGLISH
Basic setup example
To improve picture quality, you can change the video signal output from
the SCART (AV) terminal to suit the type of TV you are using.
Select “S-VIDEO”, “RGB 1” or “RGB 2” from “VIDEO OUT – SCART”
in VIDEO menu (B 18).
When both the HDMI cable and SCART cable are connected, there
will be no RGB output from the SCART (AV) terminal.
[\\\\\\\\\\\HDMI\AV\OUT\\\\\\\\\]
This connection provides the best picture quality.
Connect the HDMI cable (not included) from the HDMI AV OUT
terminal on the main unit to the HDMI AV IN terminal on your TV.
If your TV is not ARC compatible, make the extra audio connection.
Set “VIDEO PRIORITY” to “ON” (B 18, HDMI menu).
Set “VIDEO FORMAT” in Menu 4 (HDMI) (B 14).
VIERA Link “HDAVI Control”
If your Panasonic TV is VIERA Link compatible, you can operate your
TV synchronising with home theater operations or vice versa (B 15,
Using the VIERA Link “HDAVI Control
TM
”).
ARC (Audio Return Channel)
§2, 3
If the TV is ARC compatible, audio from the TV can be sent to this unit
via the HDMI cable without the need to make an extra audio connection.
Refer to the operating instructions of the TV for details.
[Note]
Please use High Speed HDMI Cables that have the HDMI logo (as
shown on the cover)
.
Non-HDMI-compliant cables cannot be utilised.
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
For TV with more than one HDMI terminal, refer to the operating
instructions for the TV to determine which terminal to connect to.
Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
[\\\\\\DIGITAL\AUDIO\IN\OPTICAL\\\\\\]
When the optical digital audio cable
§2, 3
is connected, this unit can
decode Dolby Digital audio.
Connect the optical cable (not included) from the DIGITAL AUDIO
IN OPTICAL terminal on the main unit to the OPTICAL OUT terminal
on your TV.
[Note]
After connecting with the optical digital audio cable or HDMI
§2, 3
cable,
make settings to suit the type of audio from your digital equipment
(B 10).
§2 Refer to the operating instructions of the respective devices for the
settings necessary to output the audio.
§3 Only Dolby Digital and PCM can be played with this connection.
[\\\\\\\\\AUX\\\\\\\\]
Use this connection when the TV does not have an OPTICAL OUT
terminal or when the DIGITAL AUDIO IN OPTICAL terminal on this unit
is being used by the STB.
Connect the audio cable (not included) from the AUX terminal on
the main unit to the AUDIO OUT terminal on your TV.
Use this connection when you want to output the original surround audio
from your STB, etc. to this unit.
Connect the optical digital audio cable (not included) from the
DIGITAL AUDIO IN OPTICAL terminal on this unit to the OPTICAL
OUT terminal on your STB.
If the DIGITAL AUDIO IN OPTICAL terminal is already in use for the
TV audio, reconnect the TV audio to the AUX terminal using an audio
cable.
[Note]
If you have various sound sources (such as Blu-ray player, DVD
recorder, VCR, etc.), connect them to the available inputs on the TV and
the TV output should then be connected to the SCART (AV), AUX, HDMI
AV OUT or DIGITAL AUDIO IN OPTICAL terminal of the main unit.
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.1 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the main
unit.
[Note]
The included AC mains lead is for use with the main unit only.
Do not use it with other equipment. Also, do not use cords for other
equipment with the main unit.
Use alkaline or manganese batteries.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not:
mix old and new batteries.
use different types of batteries at the same time.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Aim at the remote control signal sensor (B 4), avoiding obstacles.
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to the left and right
3
Audio and video connections
§1 This connection will also enable you to play TV audio through
your home theater system (B 10, Selecting the source by the
remote control). Select the appropriate audio out (e.g. Monitor)
on the TV.
Other video connection
Other audio connections
AV
AV1
SCART cable
§1
(not included)
TV
Main unit (rear)
e.g. [PT580]
Set Top Box (cable/satellite/Blu-ray Disc Player, etc) connection
step 4 AC mains lead connection
step 5 Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Use
AC IN
To household mains socket
Main unit (rear)
AC mains lead (included)
R6/LR6, AA
Press in and lift up.
Replace the cover.
Insert so the poles (r and j) match those in the remote control.
8
SC-PT580-880EP-RQTX1111-R_eng.book Page 8 Monday, January 25, 2010 11:51 AM
9
RQTX1111
Getting Started
Quick Start Guide
ENGLISH
The EASY SETUP screen assists you in making necessary
settings.
Language
Select the language used on menu screen.
TV aspect
Select the aspect to suit your TV.
Speaker layout
Select “Surround layout (Recommended)” mode or “Front layout
(Alternative)” mode according to your speaker layout (B 7,
Positioning).
Speaker check
Listen to speaker output to confirm speaker connections.
Speaker output
Make surround sound setting for speaker output.
TV audio
Select the audio input connection from your TV.
For AUX connection (B 8): Select “AUX”.
For HDMI connection (B 8): Select “ARC”.
For DIGITAL AUDIO IN OPTICAL connection (B 8): Select “DIGITAL
IN”.
For SCART (AV) connection (B 8): Select “AV”.
This will be the TV audio setting for VIERA Link
“HDAVI Control”
. (
B 15
)
[Note]
If this unit is connected to a “HDAVI Control 3 or later” compatible TV
via HDMI cable, the menu language and TV aspect information will be
retrieved via VIERA Link.
If this unit is connected to a “HDAVI Control 2” compatible TV via
HDMI cable, the menu language information will be retrieved via
VIERA Link.
Settings in the EASY SETUP can also be changed in the player
settings (e.g. language, TV aspect, TV audio (B 17)).
Up to 30 stations can be set.
“SET OK” is displayed when the stations are set, and the radio tunes
to the last preset station.
“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the stations manually (B below).
The FM setting is also shown on the TV display.
Press and hold [PLAY MODE]: to display “MONO”.
To cancel the mode, press and hold the button again until “AUTO ST” is
displayed.
The mode is also cancelled when you change the frequency.
Up to 30 stations can be set.
A station previously stored is overwritten when another station is stored
in the same channel preset.
The unit can display the text data transmitted by the radio data system
(RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS” will
light up on the display.
While listening to the radio broadcast
Press [FUNCTIONS]D to display the text data.
Each time you press the button:
PS: Program service
PTY: Program type
FREQ: Frequency display
step 6 EASY SETUP
Preparation
Turn on your TV and select the appropriate video input mode (e.g.
VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit.
To change your TV’s video input mode, refer to its operating
instructions.
This remote control can perform some basic TV operations (B 4).
1
Press [Í]1 to turn on the unit.
When the EASY SETUP screen appears automatically, skip
steps 2 to 7.
2
Press [DVD]5 to select “DVD/CD”.
3
Press [START]C to show the START menu.
4
Press [3, 4]9 to select “Setup” and press [OK]9.
5
Press [3, 4]9 to select “OTHERS” and press
[OK]9.
6
Press [3, 4]9 to select “EASY SETUP” and press
[OK]9.
7
Press [OK]9 to select “SET”.
8
Press [3, 4]9 to select “Yes” and press [OK]9.
9
Follow the messages and make the settings with
[3, 4, 2, 1]9 and [OK]9.
(B below, EASY SETUP settings)
10
Press [OK]9 to finish EASY SETUP.
EASY SETUP settings
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
RETURN
Menu
Listening to the radio
Presetting stations automatically
1
Press [RADIO, EXT-IN]5 to select “FM”.
2
Press [MENU]7.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
§
§ To change the frequency, refer to “Manual tuning” (B below).
3
Press and hold [OK]9.
Release the button when “FM AUTO” is displayed.
The tuner starts to preset all the stations it can receive into the
channels in ascending order.
Listening/confirming the preset channels
1
Press [RADIO, EXT-IN]5 to select “FM”.
2
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. 12: [S10]3 B [1] B [2]
Alternatively, press [X, W]A.
If noise is excessive
Manual tuning
1
Press [RADIO, EXT-IN]5 to select “FM”.
2
Press [SEARCH6, SEARCH5]@ to select the
frequency.
To start automatic tuning, press and hold [SEARCH6,
SEARCH5]@ until the frequency starts scrolling. Tuning stops
when a station is found.
Presetting stations manually
1 While listening to the radio broadcast
Press [OK]9.
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. 12: [S10]3 B [1] B [2]
Alternatively, press [X, W]A, and then press [OK]9.
RDS broadcasting
9
SC-PT580-880EP-RQTX1111-R_eng.book Page 9 Monday, December 28, 2009 5:29 PM
10
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
§“M.O.R. M”=Middle of the road music
[Note]
RDS displays may not be available if reception is poor.
You can select sound effects, desired source, change the settings, access
playback/menus, etc. by using the START menu.
When “Input Selection” is selected
You can select a desired source from the menu.
DVD/CD (B 12), FM RADIO (B 9), AV
§1
(B below), AUX
§1
(B below),
ARC
§1
(B below), DIGITAL IN
§1, 2
(B below), USB (B 17), iPod (B 16)
§1 “(TV)” will appear beside “AV”, “AUX”, “ARC” or “DIGITAL IN”,
indicating the TV audio setting for VIERA Link “HDAVI Control”
(B 15).
§2 “(STB)” will appear beside “DIGITAL IN”, indicating the STB audio
setting for VIERA Link “HDAVI Control” (B 15).
When “Setup”
is selected
You can change the settings for this unit. (B 17)
When “Sound” is selected
You can select sound quality settings (B 11, EQ (Equaliser)).
Other selectable items
The items that are displayed will vary depending on the media and
source.
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
[Note]
Confirm the audio connection to the SCART (AV), AUX, HDMI AV OUT or
DIGITAL AUDIO IN OPTICAL terminal on the main unit when you select
the corresponding sources (B 8). Reduce the volume on the TV to its
minimum, and then adjust the volume of the main unit.
Preparation
Make sure that there is an audio connection between this unit and the
TV or other device. (B 8)
Turn on the TV or/and other device.
Press [RADIO, EXT-IN]5 to choose the source that is used
to connect this unit to the TV or other device.
To change the surround sound effects and sound mode, refer to
“Enjoying sound effects from all speakers” (B 11)
If your Panasonic TV is VIERA Link compatible, refer to “Using the
VIERA Link “HDAVI Control
TM
”” (B 15) for other related functions.
Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and
HDMI AV OUT terminal on the main unit.
Setting must be made for the “D-IN” and “ARC” selector.
Underlined items are the factory presets.
§3 Only when “D-IN” is selected.
Be sure to select the device’s (STB, etc.) input channel on the TV
when making the setting.
The device must be connected to the Panasonic TV via an HDMI
cable and to this unit with an optical digital audio cable.
This function will not operate if “DIGITAL IN” is selected in “TV
AUDIO” (B 19).
PTY displays
NEWS VARIED FINANCE COUNTRY
AFFAIRS POP M CHILDREN NATIONAL
INFO ROCK M SOCIAL A OLDIES
SPORT M.O.R. M
§
RELIGION FOLK M
EDUCATE LIGHT M PHONE IN DOCUMENT
DRAMA CLASSICS TRAVEL TEST
CULTURE OTHER M LEISURE ALARM
SCIENCE WEATHER JAZZ
Using the START menu
1
Press [START]C to show the START menu.
When using VIERA Link “HDAVI Control”, the TV also turns on
when the START menu is displayed.
e.g.
2
Press [3, 4]9 to select an item and press [OK]9.
To exit, press [START]C.
3
Press [3, 4]9 to make the setting and press [OK]9.
Selecting the source by the remote control
Press To select
[DVD]5 DVD/CD
[iPod]5 IPOD (B 16)
[RADIO,
EXT-IN]5
Each time you press the button:
FM:
AV:
AUX:
ARC:
D-IN:
USB:
(B 9)
For audio input through the SCART (AV)
terminal.
For audio input through the AUX terminal.
For audio input through the HDMI AV OUT
terminal.
For audio input through the DIGITAL AUDIO
IN OPTICAL terminal. (B right)
(B 17)
DVD/CD Home Cinema
Input Selection
Setup
Sound
DVD/CD Home Cinema
Input Selection
Setup
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/menu access
Listening to the TV or other device’s
audio from this unit’s speakers
Making settings for digital audio input
Available settings
Mode Setting
DUAL: (Only works with Dolby Dual Mono)
MAIN+SAP
(stereo audio)
MAIN
SAP
SAP” = Secondary Audio Program
Set PCM FIX mode to “OFF” to listen to the “MAIN”
or “SAP” audio.
DRC:
(Dynamic
Range
Compression)
ON
Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and
the highest sound level. Convenient for late night
viewing. (Only works with Dolby Digital)
OFF
The full dynamic range of the signal is reproduced.
PCM FIX: ON
Select when receiving only PCM signals.
OFF
Select when receiving Dolby Digital and PCM
signals.
When receiving true 5.1-channel surround sound,
select “OFF”.
STB
§3
:
(CABLE/SAT
AUDIO)
SET
Select when setting the main unit to switch to “D-IN”
when the input channel of an HDMI connected STB
is selected on the TV (B 15, Setting the STB audio
for VIERA Link “HDAVI Control”).
OFF
Select to cancel this setting.
1
Press [RADIO, EXT-IN]5 several times to select “D-IN
or “ARC”.
2
Press [PLAY MODE]: and then [3, 4]9 to select the
mode.
3
While the selected mode is displayed
Press [2, 1]9 and select the desired setting.
10
SC-PT580-880EP-RQTX1111-R_eng.book Page 10 Monday, December 28, 2009 5:29 PM
11
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
The following sound effects may not be available or may have no effect
with some sources.
You may experience a reduction in sound quality when these sound effects
are used with some sources. If this occurs, turn the sound effects off.
[Note]
When changing the surround sound effect, Whisper-mode Surround or
the sound modes, the setting is displayed on the TV screen if “DVD/CD”
or “USB” is the selected source during video playback.
Press [SURROUND]<.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded. Speaker output varies
depending on the source.
MULTI-CH:
You can enjoy sound from the front speakers, as well as the surround
speakers even when playing a 2-channel sound.
MANUAL: (B below)
While “MANUAL” is displayed, press [2, 1]9 to select
other surround modes.
Each time you press [2, 1]9:
DOLBY PLII MOVIE
Suitable for movies, or videos recorded in Dolby Surround. (except
[DivX])
DOLBY PLII MUSIC
Adds 5.1-channel effects to stereo sources. (except [DivX])
S.SRD
You can enjoy sound from all speakers with stereo sources.
STEREO
Sound will only be output to the front speakers and the subwoofer from
any source.
“SRD” lights in the main unit’s display when there is output from the
surround speakers.
When the signal is DTS or Dolby Digital, “/DTS” or “/DOLBY DIGITAL” will
also be displayed respectively.
You can enhance the audio effect for low volume sound. (Convenient for
late night viewing.)
Press [W.SRD]G.
Each time you press the button:
ON ,--. OFF
Preparation
To display the picture, turn on the TV and select the appropriate video
input mode.
Press [r, VOL, s]> to adjust the volume to normal listening level.
Press [DVD]5 to select “DVD/CD”.
Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
(B 18).
(Effective when playing audio containing surround channel sound or when
“SRD” lights on the main unit’s display)
Enjoying sound effects from all
speakers
Enjoying surround sound effects
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
DOLBY PLII MOVIE DOLBY PLII MUSIC S.SRD
Selecting sound mode
1
Press [SOUND]; to select a sound mode.
Each time you press the button:
EQ: Equaliser
SUBW LVL: Subwoofer Level
H.BASS: Harmonic Bass
C.FOCUS: Center Focus
2
While the selected mode is displayed, press [2, 1]9 to
make the settings.
Refer to the following for setting details of each sound effect.
EQ (Equaliser)
You can select sound quality settings.
Each time you press [2, 1]9:
FLAT: Cancel (no effect is added).
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
SUBW LVL (Subwoofer level)
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playback
source.
LEVEL 1 ,# LEVEL 2 ,# LEVEL 3 ,# LEVEL 4
^---------------------------------------------------------------------------J
The setting you make is retained and recalled every time you
play the same type of source.
H.BASS (Harmonic Bass)
You can enhance low-frequency sound so that heavy bass sound
can be heard clearly, even if the acoustics of your room are not
optimal.
ON ,------. OFF
The setting you make is retained, and recalled every time you
play from the same type of source.
C.FOCUS (Center Focus)
(Effective when playing audio containing the center channel
sound or when DOLBY PLII (B left) is selected.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
ON,------.OFF
Whisper-mode Surround
Adjusting the speaker output level manually
1
Press [OK]9 to enter test tone mode.
Test tone will be output to each channel in the following order.
LEFT, CENTER, RIGHT, SURROUND RIGHT, SURROUND LEFT
2
Press [OK]9 then [3, 4]9 to adjust the speaker level
for each speaker. (CENTER, SURROUND RIGHT,
SURROUND LEFT)
`
6dB to
i
6 dB (Factory preset: 0 dB)
Adjusting the speaker level during playback
1
Press and hold [–CH SELECT]; to select the speaker.
While the speaker channel is displayed, press [–CH SELECT];.
L # C # R # RS # LS # SW
^--------------------------------------------------}
SW (Subwoofer) is displayed even if the source does not include a
subwoofer channel.
2
While “L” or “R” is selected.
Press [2, 1]9 to adjust the front speaker balance.
3
While “C”, “RS”, “LS” or “SW” is selected.
Press [3]9 (increase) or [4]9 (decrease) to adjust the
speaker level for each speaker.
e.g.
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
TRIM LEVEL
− −
0dB
− −
0dB
11
SC-PT580-880EP-RQTX1111-R_eng.book Page 11 Monday, December 28, 2009 5:29 PM
12
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Preparation
To display the picture, turn on your TV and change its video input mode
(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit.
[Note]
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [ STOP]6 when you finish to preserve the unit’s motor and your
TV screen.
Total title number may not be displayed properly on iR/iRW.
This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
During play, press and hold [–REPEAT]:, to show the
repeat mode.
While the repeat mode is displayed, press [–REPEAT]: to select the item
to be repeated.
e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^----------------------------------------------------b
To cancel, select “OFF”.
Items shown differ depending on the type of disc and playback mode.
Preparation
While stopped, press [PLAY MODE]: to select the play
mode.
Program and random playback screens appear sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 19, OTHERS menu) to
play MP3, JPEG, MPEG4 or DivX contents.
If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or
“VIDEO” (B 13, Using PLAYBACK MENU), then proceed with the
above.
For a disc with both WMA/MP3 and JPEG contents, select either music
or picture contents.
WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.
JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”.
[DVD-V] Some items cannot be played even if you have programmed
them.
To select all the items
Press [3, 4]9 to select “ALL” and press [OK]9.
To clear the selected program
1Press [1]9 and then press [3, 4]9 to select the program.
2Press [CANCEL]4.
To clear the whole program
Press [1]9 several times to select “CLEAR ALL”, and then press [OK]9.
The whole program is also cleared when the disc tray is opened, the unit
is turned off or another source is selected.
Basic play
1
Press [Í]1 to turn on the unit.
2
Press [DVD]5 to select “DVD/CD”.
3
Press [< OPEN/CLOSE]5 to open the disc tray.
4
Load the disc.
Load double-sided discs so the label for the
side you want to play is facing up.
5
Press [1 PLAY]6 to start play.
Press [r, VOL, s]> to adjust the volume.
Basic controls
One touch play (remote control only): [1 PLAY]6
(during standby mode)
The main unit automatically turns on and starts playing the disc in the
tray.
Stop: [STOP]6
The position is memorised while “RESUME STOP” is on the screen.
Press [1 PLAY]6 to resume.
Press [STOP]6 again to clear the position.
Pause: [; PAUSE]6
Press [1 PLAY]6 to restart play.
Skip: [SKIP:, SKIP 9]6
Search: [SEARCH6, SEARCH5]6 (during play)
Slow-motion: [SEARCH6, SEARCH5]6 (during pause)
Up to 5 steps.
Press [1 PLAY]6 to start normal play.
[VCD] Slow-motion: Forward direction only.
[MPEG4] [DivX] Slow-motion: Does not work.
Frame-by-frame: [2;, ;1]9 (during pause)
[DVD-VR] [DVD-V] [VCD]
[DVD-VR] [VCD] Forward direction only.
On-screen item select: [
3, 4, 2, 1, OK]9
[3, 4, 2, 1]9: Select
[OK]9: Confirm
Enter number: Numbered buttons
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12: [S10]3 B [1] B [2]
[VCD] with playback control
Press [ STOP]6 to cancel the PBC function, and then press the
numbered buttons.
[DVD-V] Show a disc top menu: [TOP MENU]8
[DVD-V] Show a disc menu: [MENU]7
Return to previous screen: [RETURN]E
[VCD] (with playback control) Show a disc menu: [RETURN]E
Main unit display: [FL DISPLAY]F
[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]
Time display
,-. Information display (e.g. [DVD-VR] Program number)
[JPEG]
SLIDE
,-.Contents number
Label facing up
Other modes of play
Repeat play
Program and Random play
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
Program play (up to 30 items)
1
Press [3, 4]9 to select an item and press [OK]9.
e.g. [DVD-V]
Repeat this step to program other items.
To return to the previous menu, press [RETURN]E.
2
Press [1 PLAY]6 to start play.
Random play
1
(Only when the disc has groups or multiple titles.)
Press [3, 4]9 to select a group or title and press
[OK]9.
e.g. [DVD-V]
*
” represents selected. To deselect, press [OK]9 again.
2
Press [1 PLAY]6 to start play.
DVD-V PROGRAM
SELECT TITLE TITLE CHAPTER
TITLE 1
TITLE 2
TITLE 3
TITLE 4
1
2
3
4
5
DVD-V RANDOM
SELECT TITLE
TITLE 1
TITLE 2
TITLE 3
12
SC-PT580-880EP-RQTX1111-R_eng.book Page 12 Monday, December 28, 2009 5:29 PM
13
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 19, OTHERS menu) to
play MP3, JPEG, MPEG4 or DivX contents.
“PLAYBACK MENU” screen appears when the disc contains both video
(MPEG4/DivX) and other format (WMA/MP3/JPEG).
Press [3, 4]9 to select “AUDIO/PICTURE” or “VIDEO” and
press [OK]9.
To start play, press [1 PLAY]6.
To select an item to play, refer “Playing from the selected item”
(B below).
You can select to play from your desired item while the “DATA-DISC”
screen is displayed.
e.g.
To display/exit the screen, press [MENU]7.
Press [3, 4]9 to select an item and press [OK]9.
Press [2, 1]9 to skip page by page.
To return to 1 level up from the current folder, press [RETURN]E.
Maximum: 28 characters for file/folder name.
Play starts from the selected content.
[JPEG] Selecting the picture in Thumbnail menu
To go to other group
1 Press [3]9 to select the group name.
2 Press [2, 1]9 to select the group and press [OK]9.
Titles appear only if the titles are recorded on the disc.
You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Using navigation menus
Playing data discs
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Using PLAYBACK MENU
Playing from the selected item
1
While picture is displayed, press [TOP MENU]8 to show
the thumbnail menu.
e.g.
2
Press [3, 4, 2, 1]9 to select a picture and press
[OK]9.
Press [SKIP:,SKIP9]6 to skip page by page.
Playing DVD-R/-RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1
While stopped, press [DIRECT NAVIGATOR]8.
e.g.
2
Press [3, 4]9 to select the program and press [OK]9.
Press [2, 1]9 to skip page by page.
WMA/MP3/JPEG
MPEG4/DivX
PLAYBACK MENU
AUDIO/PICTURE
VIDEO
DATA-DISC
ROOT
Perfume
Underwater
Fantasy planet
Starpersons1
Group (Folder):
Content (File):
: WMA/MP3
: JPEG
: MPEG4/DivX
JPEG images G 1/ 1:C 3/ 9
Group name
Group and content
number
PG
DATE
LENGTH
TITLE
1 0:16:02
10/11
LIVE CONCERT
02:15
2 0:38:25
12/05
AUTO ACTION
01:30
Playing a play list
1
While stopped, press [PLAY LIST]7.
e.g.
2
Press [3, 4]9 to select the play list and press [OK]9.
Press [2, 1]9 to skip page by page.
Using on-screen menus
1
Press [FUNCTIONS]D to show the on-screen menu.
Each time you press the button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
Menu 4 (HDMI)
Exit
2
Press [3, 4, 2, 1]9 to select the item and press
[OK]9.
3
Press [3, 4]9 to make the settings and press [OK]9.
Items shown differ depending on the type of disc.
Menu 1 (Disc/Play)
TRACK SEARCH, TITLE SEARCH, CONTENT SEARCH,
CHAPTER SEARCH, PG SEARCH (Program Search),
PL SEARCH (Playlist Search)
To start from a specific item
[VCD] This does not work when using playback control.
e.g. [DVD-V]: T2 C5
To select numbers for data disc
e.g. 123: [S10]3 B [1] B [2] B [3] B [OK]9
AUDIO
[DVD-V] [DivX] (with multiple soundtracks)
To select audio soundtrack
[DVD-VR] [VCD]
To select “L”, “R”, “L+R” or “L R”
Actual operations depend on the disc. Read the disc’s instructions for
details.
Signal type/data
LPCM/PPCM/ D/DTS/MP3/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of channels)
[DivX] It may take some time for play to start if you change the audio on
a DivX video disc.
PL
DATE
LENGTH
TITLE
10:00:10
11/11
CITY PENGUIN
00:01
20:01:20
12/01
FOOTBALL
01:20
T
1
C1
1:ENG
3
1
OFF
TITLE SEARCH
Current item
Item name
e.g. Menu 1 (Disc/Play) [DVD-V]
T
1:ENG
3
1
OFF
CHAPTER SEARCH
C1
1
Current setting
e.g. Menu 1 (Disc/Play) [DVD-V]
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Low frequency effect
(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
e.g.
13
Other Operations
SC-PT580-880EP-RQTX1111-R_eng.book Page 13 Monday, December 28, 2009 5:29 PM
14
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from “k0.6” to “k1.4” (in 0.1-unit steps)
Press [1 PLAY]6 to return to normal play.
After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 48 kHz.
This function may not work depending on the disc’s recording.
REPEAT MODE
(B 12, Repeat play)
A-B Repeat (To repeat a specified section)
Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture part) [VCD] (SVCD)
Press [OK]9 at the starting and ending points.
Select “OFF” to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles) [VCD] (SVCD only)
To select subtitle language
On iR/iRW, a subtitle number may be shown for subtitles that are
not displayed.
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
This may not work depending on the disc.
[DivX] (B 19, Displaying DivX subtitles text)
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s date display
ROTATION
[JPEG] To rotate a picture (during pause)
0,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1:
CINEMA2:
DYNAMIC:
ANIMATION:
Mellows images and enhances detail in dark scenes.
Sharpens images and enhances detail in dark scenes.
Enhances the contrast for powerful images.
Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO (
[DVD-VR]
[DVD-V] [VCD] [MPEG4] [DivX]
),
k
2,
k
4
[JPEG]: during pause
TRANSFER MODE
If you have chosen “480p”/“576p”/“720p”/“1080p” or “1080i” (“VIDEO
FORMAT” in Menu 4 (HDMI)), select the method of conversion for
progressive output to suit the type of material.
The setting will return to “AUTO” or “AUTO1” when the disc tray is
opened, the unit is turned off or another source is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
Automatically detects the film and video content, and
appropriately converts it.
Select when using “AUTO”, and the content is distorted.
Select this if the edges of the film
content appear jagged or rough when
“AUTO” is selected.
However, if the video content is
distorted as shown in the illustration
to the right, then select “AUTO”.
JPG
DATE
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
Automatically detects the film and video content, and
appropriately converts it.
In addition to “AUTO1”, automatically detects film
contents with different frame rates and appropriately
converts it.
Select if the video content is distorted when using
“AUTO1” or “AUTO2”.
SOURCE SELECT [DivX]
When you select “AUTO” the constructing method of the DivX contents
is automatically distinguished and output. If the picture is distorted,
select “INTERLACE” or “PROGRESSIVE” depending on which
constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Menu 3 (Audio)
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue
recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in
the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
To show HDMI information
e.g.
1 Connection status
2 Shows the output signal type.
(When “OFF” is selected in “AUDIO OUT” (B 18, HDMI menu),
“– – –” will be displayed.)
3 Shows the number of audio channels.
4 (B below, VIDEO FORMAT)
5 (B below, COLOUR SPACE)
HD ENHANCER
This works when the HDMI connection is being used with “VIDEO
PRIORITY” (B 18, HDMI menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p” picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being used with “VIDEO
PRIORITY” (B 18, HDMI menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output as, high-definition
video.)
§
480p/576p/720p/1080p (progressive)
§
480i/576i/1080i (interlaced)
If the picture is distorted, press and hold [CANCEL]4 until the picture
is displayed correctly. (The output will return to “480p”/“576p”.)
§ The numbers displayed depend on the disc being played. One of
the above numbers is displayed.
COLOUR SPACE
This works when the HDMI connection is being used with “VIDEO
PRIORITY” (B 18, HDMI menu) set to “ON”.
To select suitable picture colour with your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
An “
*
” mark will appear if compatible with your TV.
If the picture colour is distorted, press and hold [CANCEL]4 until the
picture colour is displayed correctly.
HDMI
HDMI --- INFORMATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPACE
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
14
SC-PT580-880EP-RQTX1111-R_eng.book Page 14 Monday, December 28, 2009 5:29 PM
15
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
VIERA Link “HDAVI Control”
VIERA Link “HDAVI Control” is a convenient function that offers linked
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI
Control”. You can use this function by connecting the equipment with the
HDMI cable. See the operating instructions for connected equipment for
operational details.
VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December,
2009) for Panasonic’s HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI
equipment.
Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
The TV with “HDAVI Control 2 or later” function enables the following
operation: Easy control only with VIERA remote control (for
“HDAVI Control 2 or later”) (B right).
Preparation
Confirm that the HDMI connection has been made (B 8).
Set “VIERA Link” to “ON” (B 19, HDMI menu).
To complete and activate the connection correctly, turn on all VIERA
Link “HDAVI Control” compatible equipment and set the TV to the
corresponding HDMI input mode for this unit.
Setting the TV audio for VIERA Link “HDAVI Control”
Select “AV”, “AUX”, “ARC” or “D-IN” to work with the linked operations.
Refer to TV audio setting in EASY SETUP (B 9) or “TV AUDIO” in HDMI
menu (B 19).
Confirm the audio connection to the SCART (AV) terminal (for “AV”), AUX
terminal (for “AUX”), HDMI AV OUT terminal (for “ARC”) or DIGITAL
AUDIO IN OPTICAL terminal (for “D-IN”) (B 8).
Setting the STB audio for VIERA Link “HDAVI Control”
Select “D-IN” to work with the linked operations.
Refer to STB setting in “Making settings for digital audio input” (B 10).
Confirm the audio connection to the DIGITAL AUDIO IN OPTICAL
terminal (for “D-IN”) (B 8).
Whenever the connection or settings are changed, reconfirm the points
above.
(Available when using VIERA Link “HDAVI Control” with
“HDAVI Control 3 or later” compatible TV)
This function automatically provides synchronised audio and video
output. (This works only when the source is “DVD/CD”, “USB”, “AV”
§1
,
“AUX”
§1
, “ARC”
§1
or “D-IN”
§1, 2
.)
When using “DVD/CD” or “USB” as the source, set “TIME DELAY” in
VIDEO menu to “0 ms/AUTO” (B 18).
You can turn on this unit and the TV, and start playing the disc with a
single press of a button.
(Remote control only)
During standby mode, press [1 PLAY]6 to start disc
playback.
This unit’s speakers will be automatically activated (B right).
[Note]
Playback may not be immediately displayed on the TV. If you miss the
beginning portion of playback, press [SKIP:]6 or [SEARCH6]6 to
go back to where playback started.
When the following operations are performed, the TV will automatically
switch the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., START
menu)
When you switch the TV input to TV tuner mode or the STB input
channel, this unit will automatically switch to “AV”
§1
, “AUX”
§1
, “ARC”
§1
or “D-IN”
§1, 2
. (For “IPOD” mode, this works only in iPod/iPhone music
mode, or when iPod/iPhone is not connected.)
When this unit is in “DVD/CD” mode, the TV will automatically switch its
input mode for this unit.
The TV will automatically switch to TV tuner mode when:
– you press [EXIT].
§3, 4
– you press [RETURN] to exit the START menu.
§3, 4
– you select “AV”
§1
,
AUX”
§1
, “ARC”
§1
or “DIGITAL IN”
§1
from the
START menu.
– playback stops ([DVD-V] [VCD]) or when this unit turns off.
§4
§3 This does not work during playback or resume mode when “DVD/CD”
or “USB” is selected as the source. (For “IPOD” mode, this works
only in iPod/iPhone music mode, or when iPod/iPhone is not
connected.)
§4 Only after the TV automatically switched to the HDMI input mode for
this unit.
All connected equipment compatible with “HDAVI Control”, including this
unit, automatically turn off when you switch the TV off.
To continue audio playback even when the TV is turned off, select
“VIDEO” (B 19, “POWER OFF LINK” in HDMI menu).
[Note]
When you press [Í]1, only this unit turns off. Other connected
equipment compatible with VIERA Link “HDAVI Control” stays on.
For details, refer also to the operating instructions for your TV.
You can select whether audio is output from this unit’s speakers or the TV
speakers by using the TV menu settings. For details, refer to the
operating instructions for your TV.
Home Cinema
This unit’s speakers are active.
When you turn on this unit, this unit’s speakers will be automatically
activated.
When this unit is in standby mode, changing the TV speakers to this
unit’s speakers in the TV menu will automatically turn this unit on and
select “AV”
§1
, “AUX”
§1
, “ARC”
§1
or “D-IN”
§1, 2
as the source.
The TV speakers are automatically muted.
You can control the volume setting using the volume or mute button on
the TV’s remote control. (The volume level is displayed on the main
unit’s display.)
To cancel muting, you can also use this unit’s remote control (B 4).
If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
The volume of this unit is set to “0”.
– This function works only when “DVD/CD”, “USB”, “AV”
§1
, “AUX”
§1
,
“ARC”
§1
or “D-IN”
§1, 2
is selected as the source on this unit.
Audio output is 2-channel audio.
When switching between this unit speakers and TV speakers, the TV
screen may be blank for several seconds.
You can control the playback menus of this unit with the TV’s remote
control.
Using the VIERA Link “HDAVI
Control
TM
What is VIERA Link “HDAVI Control”
§1 “AV”, “AUX”, “ARC” or “D-IN” (DIGITAL IN) works depending on the
TV audio setting (B above, Setting the TV audio for VIERA Link
“HDAVI Control”).
§2
“D-IN” (DIGITAL IN) works depending on the STB audio setting
(B above, Setting the STB audio for VIERA Link “HDAVI Control”).
What you can do with “HDAVI Control”
Auto lip sync
One touch play
Auto input switching
(Power on link)
Power off link
Speaker Selection
Easy control only with VIERA remote control (for
“HDAVI Control 2 or later”)
1 Select this unit’s operation menu by using the TV menu settings.
(For details, refer to the operating instructions for your TV.)
The START menu will be shown.
e.g. [DVD-V]
DVD/CD Home Cinema
Input Selection
Setup
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/menu access
15
Reference
SC-PT580-880EP-RQTX1111-R_eng.book Page 15 Monday, December 28, 2009 5:29 PM
16
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
You can operate the playback with the indicated controls.
The on-screen control panel can also be shown by using a button on the
TV’s remote control (e.g. [OPTION]).
– This works only during “DVD/CD” or “USB” playback and resume
modes or, while iPod music playback screen is displayed on the TV.
[Note]
Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
You cannot input numbers with the numbered buttons on the TV’s
remote control ([0] to [9]). Use this unit’s remote control to select the
play list etc.
You can play an external device through your home theater system.
You can enjoy iPod/iPhone music through this unit’s speakers or view
iPod/iPhone videos/photos on the TV.
Preparation
To view photos/videos from the iPod/iPhone
– Ensure the video connection to the SCART (AV) terminal on this unit and
select “VIDEO” from “VIDEO OUT – SCART” in VIDEO menu (
B
18).
– Operate the iPod/iPhone menu to make the appropriate photo/video
output settings for your TV. (Refer to operating instructions for your
iPod/iPhone.)
To display the picture, turn on the TV and select the appropriate video
input mode.
Before connecting/disconnecting the iPod/iPhone, turn the main unit off
or reduce the volume of the main unit to its minimum.
When using the START menu in “IPOD” mode
e.g.
Music: Shows the music menu.
Videos: Shows the video menu.
All (iPod display): Switches to iPod/iPhone menu.
iPod Information: Display iPod/iPhone details.
Play starts from the selected song or video.
e.g. music playback screen
§ These icons will only appear for music mode.
Other methods of playback
Shuffle mode
(For music playback only)
Press [PLAY MODE]: several times.
SONGS, ALBUMS, OFF
Repeat mode
Press and hold [–REPEAT]: and then press the button several times
within a few seconds.
During the music/video playback: ONE, ALL, OFF
[Note]
Music playback modes set on the iPod/iPhone will be maintained when
connected to the main unit. Changes made while the iPod/iPhone is
connected to the main unit will be kept on the iPod/iPhone after
disconnecting it.
If the video menu is accessed, the video shuffle playback mode on the
iPod/iPhone is set to off when the iPod/iPhone is disconnected from the
unit.
While an iPod/iPhone is connected
Do not push or pull your iPod/iPhone back and forth with great force.
About recharging the battery
iPod/iPhone will start recharging regardless of whether this unit is on or
off.
“IPOD ¢” will be shown on the main unit’s display during iPod/iPhone
charging in main unit standby mode.
Check iPod/iPhone to see if the battery is fully recharged.
The START menu can also be shown by using a button on the TV’s
remote control (e.g. [OPTION]).
– When “DVD/CD” or “USB” is selected as the source, the TV’s
remote control works only during stop mode.
– This does not work while iPod music playback screen is displayed
on the TV.
2 Select the desired item on the START menu (B 10).
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.)
Operating other devices
Using the iPod/iPhone
1
Push # to open the Dock for iPod/iPhone lid.
2
Connect the iPod/iPhone (not included) firmly.
Attach the dock adapter which should be supplied with your iPod/
iPhone to the dock for the stable use of the iPod/iPhone.
If you need an adapter, consult your iPod/iPhone dealer.
3
Press [iPod]5 to select “IPOD”.
The iPod/iPhone automatically switches to this unit’s display mode.
e.g.
4
Press [FUNCTIONS]D to select the menu.
Each time you press the button:
Music menu -----------------------------------------------) Video menu
^--- iPod/iPhone menu (iPod/iPhone LCD) (-}
Dock adapter
(not included)
iPod/iPhone
Dock for iPod/iPhone
Push
Main unit
e.g.
iPod
Music
Home Cinema
Playlists
Artists
Albums
Enjoying music/videos
1
Press [FUNCTIONS]D to select music or video menu
on the TV.
2
Press [3, 4]9 to select an item and press [OK]9.
Press [2, 1]9 to skip page by page.
To return to the previous screen, press [RETURN]E.
: Song shuffle
: Album shuffle
: Repeat 1 song
: Repeat all
Basic controls (For music and videos only)
Button Function
[1 PLAY]6 Play
[STOP]6, [; PAUSE]6 Pause
[SKIP:, SKIP 9]6 Skip
(press and hold)
[SKIP:, SKIP 9]6
Search
Enjoying photos
1
Press [FUNCTIONS]D to select the iPod/iPhone menu.
2
Play a slideshow on your iPod/iPhone.
You can use the remote control to operate the iPod/iPhone menu.
[3, 4]9: To navigate menu items.
[OK]9: To go to the next menu.
[RETURN]E: To return to the previous menu.
The remote control operation may vary between iPod/iPhone models.
iPod
Home Cinema
Music
Videos
All (iPod display)
Input Selection
Sound
iPod Information
iPod Home Cinema
Good morning
Ronaldo
Happy days
3 of 20
2:43 -1:15
Playback condition
Song
Artist
Album
Current position
Shuffle mode
Repeat mode
16
SC-PT580-880EP-RQTX1111-R_eng.book Page 16 Monday, December 28, 2009 5:29 PM
17
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
If you are not using iPod/iPhone for an extended period of time after
recharging has completed, disconnect it from main unit, as the battery
will be depleted naturally. (Once fully recharged, additional recharging
will not occur.)
Compatible iPod/iPhone (as of December 2009)
iPhone 3GS (16GB, 32GB)
iPhone 3G (8GB, 16GB)
iPhone (4GB, 8GB, 16GB)
iPod nano 5th generation (video camera) (8GB, 16GB)
iPod touch 2nd generation (8GB, 16GB, 32GB, 64GB)
iPod classic (120GB, 160GB (2009))
iPod nano 4th generation (video) (8GB, 16GB)
iPod classic (160GB (2007))
iPod touch 1st generation (8GB, 16GB, 32GB)
iPod nano 3rd generation (video) (4GB, 8GB)
iPod classic (80GB)
iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)
iPod 5th generation (video) (60GB, 80GB)
iPod 5th generation (video) (30GB)
iPod nano 1st generation (1GB, 2GB, 4GB)
iPod 4th generation (color display) (40GB, 60GB)
iPod 4th generation (color display) (20GB, 30GB)
iPod 4th generation (40GB)
iPod 4th generation (20GB)
iPod mini (4GB, 6GB)
Compatibility depends on the software version of your iPod/iPhone.
To use the iPod touch/iPhone features
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone features on the touch screen to operate.
You can connect and play tracks or files from USB mass storage class
devices (B 25, USB Port).
Devices which are defined as USB mass storage class:
– USB devices that support bulk only transfer.
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The USB device
connected using the cable will not be recognised by this unit.
Play starts from the selected content.
For other operating functions, they are similar to those described in
“Playing Discs” (B 12 to 14).
[Note]
Maximum: 255 folders (excluding Root folder), 4000 files, 28 characters
for file/folder name.
Only one memory card will be selected when connecting a multiport
USB card reader. Typically the first memory card inserted.
To return to the previous screen, press [RETURN]E.
To exit the screen, press [START]C.
The settings remain intact even if you switch the unit to standby.
Underlined items are the factory settings in the following menus.
§1 The original language designated on the disc is selected.
§2 Input the appropriate code from the language code list (B 4).
§3 If the language selected for “AUDIO” is not available, subtitles appear
in that language (if available on the disc).
SUBTITLE TEXT [DivX]
Select a suitable item according to the language used for DivX subtitles
text (B 19)
This item is displayed only after a file with subtitle text (B 19) has been
played and when “LANGUAGE” in DISPLAY menu is set to “ENGLISH”
(B 18).
RATINGS
Set a rating level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without rating levels.
1 to 7
8 NO LIMIT
When you select your ratings level, a password screen is shown.
Follow the on-screen instructions.
Playing from an USB device
1
Connect the USB device (not included) to the
USB port ( 6).
2
Press [RADIO, EXT-IN]5 to select “USB”.
The menu screen appears.
e.g.
If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE”
or “VIDEO” by pressing [3, 4]9 and then [OK]9.
To display/exit the screen, press [MENU]7.
3
Press [3, 4]9 to select an item and press [OK]9.
Press [2, 1]9 to skip page by page.
To return to 1 level up from the current folder, press [RETURN]E.
USB
ROOT
Songs
Concert_01
Concert_02
Southern AI
Changing the player settings
1
Press [DVD]5 to select “DVD/CD”.
2
Press [START]C to show the START menu.
3
Press [3, 4]9 to select “Setup” and press [OK]9.
4
Press [3, 4]9 to select the menu and press [OK]9.
5
Press [3, 4]9 to select the item and press [OK]9.
6
Press [3, 4]9 to make the settings and press [OK]9.
DISC menu
AUDIO
Choose the audio language.
ENGLISH
FRENCH SPANISH GERMAN
RUSSIAN HUNGARIAN CZECH POLISH
ORIGINAL
§1
OTHER – – – –
§2
SUBTITLE
Choose the subtitle language.
AUTO
§3
ENGLISH FRENCH SPANISH
GERMAN RUSSIAN HUNGARIAN CZECH
POLISH OTHER – – – –
§2
MENUS
Choose the language for disc menus.
ENGLISH
FRENCH SPANISH GERMAN
RUSSIAN HUNGARIAN CZECH POLISH
OTHER – – – –
§2
LATIN1 LATIN2 CYRILLIC TURKISH
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
RETURN
Menu
SET
RETURN
DISC
CURRENT SETTINGS
AUDIO
SUBTITLE
MENUS
RATINGS
PASSWORD
ENGLISH
AUTO
ENGLISH
8 NO LIMIT
Display the current setting
of the items below
Item Setting
17
SC-PT580-880EP-RQTX1111-R_eng.book Page 17 Monday, December 28, 2009 5:29 PM
18
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Do not forget your password.
A message screen will be shown if a DVD-Video disc exceeding the rating
level is inserted in the unit.
Follow the on-screen instructions.
PASSWORD
Change the password for “RATINGS”.
SETTING
To change ratings (When level 0 to 7 is selected)
CHANGE: Follow the on-screen instructions.
TV ASPECT
Choose the setting to suit your TV.
16:9
: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it
fills the screen (unless prohibited by the disc).
4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
VIDEO OUT – SCART
Choose the video signal format to be output from the SCART (AV)
terminal.
VIDEO
S-VIDEO
RGB 1: (Only when connected to a RGB compatible TV)
If you always would like to view the picture from the unit in RGB signal,
select this mode. The TV screen will automatically switch to display the
picture from the unit when the unit is turned on.
RGB 2: (Only when connected to a RGB compatible TV)
When in TV tuner mode, if the selector is set to “DVD/CD”, the TV screen
will automatically switch to display the picture from the unit only during disc
playback (
[DVD-V]
[DVD-VR]
[VCD]
) or when viewing on-screen menu of
DVD/CD.
The TV picture will be displayed when the selector is set to “AV”. With
other selectors, the picture from this unit will be displayed.
Select to suit the type of equipment you connected to the HDMI AV OUT
terminal.
Select “BITSTREAM” when the equipment can decode the bitstream
(digital form of 5.1-channel data). Otherwise, select “PCM”.
(If the bitstream is output to the equipment without a decoder, high levels
of noise can be output and may damage your speakers and hearing.)
DOLBY DIGITAL
§
DTS
§
MPEG
§
§
When audio is output from HDMI AV OUT terminal, and the
connected equipment does not support the item selected, the actual
output will depend on the performance of this connected equipment.
VIDEO menu
TIME DELAY
When connected with a Plasma display, adjust if you notice the audio is
out of sync with the video.
0 ms/AUTO
20 ms 40 ms 60 ms
80 ms 100 ms
When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later”
compatible TV (B 15), select “0 ms/AUTO”.
Audio and video will automatically be set in sync.
NTSC DISC OUT
Choose PAL 60 or NTSC output when playing NTSC discs (B 20, Video
systems).
NTSC: When connected to an NTSC TV.
PAL60
: When connected to a PAL TV.
STILL MODE
Specify the type of picture shown when paused.
AUTO
FIELD: The picture is not blurred, but picture quality is lower.
FRAME: Overall quality is high, but the picture may appear blurred.
AUDIO menu
BITSTREAM PCM
BITSTREAM
PCM
BITSTREAM PCM
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low. Convenient for
late night viewing. (Only works with Dolby Digital)
OFF
SPEAKER SETTINGS
Select the delay time of the speakers.
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for
the subwoofer, should be the same distance from the seating position.
If you have to place the center or surround speakers closer to the seating
position, adjust the delay time to make up for the difference.
If either distance a or b is less than c, find the difference in the table
and change to the recommended setting.
a Center speaker b Surround speaker
Difference (Approx.) Setting Difference (Approx.) Setting
30 cm 1ms 150 cm 5ms
60 cm 2ms 300 cm 10ms
90 cm 3ms 450 cm 15ms
120 cm 4ms
150 cm 5ms
SETTINGS:
C DELAY (Center Delay):
0ms
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker.
LS/RS DELAY (Left Surround/Right Surround Delay):
0ms
, 5ms, 10ms, 15ms
Select the delay time for your surround speakers.
TEST TONE: SETTING
This item is only displayed when “DVD/CD” is selected.
Use the test tone for speaker level adjustments (B 11, Adjusting
the speaker output level manually).
DISPLAY menu
LANGUAGE
Choose the language for the on-screen messages.
ENGLISH
FRANÇAIS ESPAÑOL DEUTSCH
PУCCKИЙ MAGYAR ÇESKY POLSKI
HDMI menu
VIDEO PRIORITY
ON: When using the HDMI AV OUT terminal for video output. The
resolution of the video output from the HDMI AV OUT terminal is
optimised according to the capability of the connected
equipment (e.g. TV).
OFF: When not using the HDMI AV OUT terminal for video output.
AUDIO OUT
ON: When audio output is from the HDMI AV OUT terminal.
(Depending on the capabilities of the connected equipment,
audio output may differ from the audio settings of the main unit.)
OFF
: When audio output is not from the HDMI AV OUT terminal. (The
audio is output using the settings of the main unit.)
RGB RANGE
This works only when “COLOUR SPACE” in Menu 4 (HDMI) is set to RGB
(B 14).
STANDARD
ENHANCED: When the black and white images are not distinct.
L
LS
R
SW
C
RS
C
RS
LS
:
:
:
Actual speaker position
Ideal speaker position
Primary listening
distance
Approximate room dimensions
Circle of constant primary listening distance
18
SC-PT580-880EP-RQTX1111-R_eng.book Page 18 Monday, December 28, 2009 5:29 PM
19
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
REGISTRATION [DivX]
Display the unit’s registration code.
SHOW CODE
You need this registration code to purchase and play DivX Video-on-
Demand (VOD) content (B right).
This setting is only displayed until a DivX VOD content is played or after
this unit is deregistered.
DEREGISTRATION [DivX]
Display the unit’s deregistration code.
SET
You need this deregistration code to cancel this unit’s registration
(B right).
This setting is only displayed after playing DivX VOD content for the first
time.
SLIDE SHOW TIME
Set the speed of the slideshow.
Factory preset: 3 SEC
1 SEC to 15 SEC (in 1-unit steps)
15 SEC to 60 SEC (in 5-unit steps)
60 SEC to 180 SEC (in 30-unit steps)
DEFAULTS
This returns all values in the MAIN menu to the default settings.
RESET
The password screen is shown if “RATINGS” (B 17) is set. Please enter
the same password, then turn the unit off and on again.
ABOUT DIVX VIDEO:
DivX
®
is a digital video format created by DivX, Inc. This is an official DivX
Certified device that plays DivX video. Visit www.divx.com for more
information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
®
device must be registered in order to play DivX
Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the
device setup menu.
Go to vod.divx.com with this code to complete the registration process
and learn more about DivX VOD.
Display the unit’s registration code
(B left, “REGISTRATION” in OTHERS menu)
After playing DivX VOD content for first time, the registration code is not
displayed.
If you purchase DivX VOD content using a registration code different
from this unit’s code, you will not be able to play this content.
Cancel the unit’s registration
Select “SET” in “DEREGISTRATION” (B left) and follow the on-screen
instructions.
Use the deregistration code to cancel the registration in
http://vod.divx.com.
Regarding DivX content that can only be played a set
number of times
Some DivX VOD contents can only be played a set number of times.
When you play this content, the number of times already played and
initially playable number of times is displayed.
The remaining number of plays decreases each time a programme is
played. However, when playing from the point where play was
previously stopped, the remaining number of plays does not decrease
due to the resume play function.
You can display subtitles text on a DivX video disc with this unit.
This function has no relation to the subtitles specified in the DivX standard
specifications and has no clear standard.
Set “SUBTITLE” in Menu 1 (Disc/Play) (B 14)
Types of subtitles text file that can be displayed
Subtitles text that satisfy the following conditions can be displayed on this
unit.
File format: MicroDVD, SubRip, or TMPlayer
File extension: “.SRT”, “.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”
File name: No more than 44 characters excluding the file extension
The DivX video file and subtitles text file are inside the same folder, and
the file names are the same except for the file extensions.
If there are more than one subtitles text files inside the same folder, they
are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.
[Note]
If the file name of the DivX video file is not displayed correctly on the
menu screen (the file name is displayed as “¢”), or the file size exceeds
256 KB, the subtitles text may not be displayed correctly.
The subtitles text cannot be displayed during menu display or when
operations such as search are being performed.
DivX video files that do not display “TEXT ON” do not contain subtitles
text. Subtitles text cannot be displayed.
If the subtitles text are not displayed correctly, try changing the subtitle
text settings (B 17).
VIERA Link
ON: The VIERA Link “HDAVI Control” function is available (B 15).
OFF
POWER OFF LINK
Select the desired power off link setting of this unit for VIERA Link
operation (B 15). (This works depending on the settings of the connected
VIERA Link “HDAVI Control” compatible equipment.)
VIDEO/AUDIO
: When the TV is turned off, this unit will turn off
automatically.
VIDEO: When the TV is turned off, this unit will turn off except during the
following conditions:
– audio playback ([CD] [MP3] [WMA])
– iPod/iPhone mode
– radio mode
– “AV”, “AUX”, “ARC” or “D-IN” mode (non-selected TV audio
setting for
VIERA Link
)
TV AUDIO
Select the TV audio input to work with the
VIERA Link
operations (B 15).
AUX
ARC
DIGITAL IN
AV
OTHERS menu
FL DIMMER
Change the brightness of the unit’s display.
BRIGHT
DIM: The display is dimmed.
AUTO: The display is dimmed, but brightens when you perform
some operations.
EASY SETUP
SET (B 9)
DVD-VR/DATA
Select to play only DVD-VR or DATA format.
DVD-VR
: To play the video programs on DVD-R/-RW.
DATA: To play the data files on DVD-R/-RW.
SCREEN DIMMER
This is to prevent burn marks on the TV screen.
OFF
WAIT 5 MIN
: If there is no operation for 5 minutes, the picture turns
grey. The TV screen will resume when you perform some
operations. (This does not work during video and picture
playback.)
DivX information
Displaying DivX subtitles text
SET
RETURN
OTHERS−REGISTRATION (DivX)
YOU MUST REGISTER YOUR DEVICE TO
PLAY DivX PROTECTED VIDEOS.
REGISTRATION CODE:
XXXXXXXXXX
REGISTER AT http://vod.divx.com
10 alphanumeric characters
19
SC-PT580-880EP-RQTX1111-R_eng.book Page 19 Monday, December 28, 2009 5:29 PM
20
RQTX1111
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Commercial discs
Recorded discs
Before playback, finalise the disc on the device it was recorded on.
It may not be possible to play all the above-mentioned discs in some
cases due to the type of disc, the condition of the recording, the
recording method, or how the files were created (B right, Tips for
making data discs).
Blu-ray, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-Audio,
DVD-ROM, CD-ROM, CDV, CD-G, SACD, Photo CD, DVD-RAM, and
“Chaoji VCD” available on the market including CVD, DVCD and SVCD
that do not conform to IEC62107.
This unit can play PAL and NTSC, but your TV must match the system
used on the disc.
PAL discs cannot be correctly viewed on an NTSC TV.
This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV
(B 18, “NTSC DISC OUT” in VIDEO menu).
Do not attach labels or stickers to discs. This may cause disc warping,
rendering it unusable.
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
Do not use scratch-proof protectors or covers.
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels (rented
discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
There may be differences in the display order on the menu screen and
computer screen.
This unit cannot play files recorded using packet write.
DVD-R/RW
Discs must conform to UDF bridge (UDF 1.02/ISO9660).
This unit does not support multi-session. Only the default session is
played.
CD-R/RW
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
This unit supports multi-session but if there are many sessions it takes
more time for play to start. Keep the number of sessions to a minimum
to avoid this.
Discs that can be played
Type of media/
Logo
Remarks Indicated as
DVD-Video High quality movie and
music discs
[DVD-V]
Video CD Music discs with video
Including SVCD
(Conforming to IEC62107)
[VCD]
CD Music discs [CD]
Type of media/
Logo
Formats Indicated as
DVD-R/RW DVD-Video Format
Version 1.1 of the DVD
Video Recording Format
MP3 format
JPEG format
DivX
®
format
MPEG4 format
[DVD-V]
[DVD-VR]
[MP3]
[JPEG]
[DivX]
[MPEG4]
DVD-R DL DVD-Video Format
Version 1.2 of the DVD
Video Recording Format
DivX
®
format
[DVD-V]
[DVD-VR]
[DivX]
rR/rRW/rRDL +VR (+R/+RW Video
Recording) Format
[DVD-V]
CD-R/RW MP3 format
JPEG format
WMA format
DivX
®
format
MPEG4 format
[MP3]
[JPEG]
[WMA]
[DivX]
[MPEG4]
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical
specifications of the Compact Disc Digital Audio (CD-DA) format so
playback may not be possible.
Discs that cannot be played
Video systems
Disc handling precautions
Tips for making data discs
[WMA] (Extension: “.WMA”, “.wma”)
Disc: CD-R/RW
Compatible compression rate: between 48 kbps and 320 kbps
You cannot play WMA files that are copy-protected.
[MP3] (Extension: “.MP3”, “.mp3”)
Disc: DVD-R/RW, CD-R/RW
This unit does not support ID3 tags.
Sampling frequency and compression rate:
– DVD-R/RW: 11.02 kHz, 12 kHz, 22.05 kHz, 24 kHz (8 kbps to
160 kbps), 44.1 kHz and 48 kHz (32 kbps to 320 kbps)
– CD-R/RW: 8 kHz, 11.02 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz
(8 kbps to 160 kbps), 32 kHz, 44.1 kHz and 48 kHz (32 kbps to
320 kbps)
[JPEG] (Extension: “.JPG”, “.jpg”, “.JPEG”, “.jpeg”)
Disc: DVD-R/RW, CD-R/RW
JPEG files taken on a digital camera that conform to DCF Standard
(Design rule for Camera File system) Version 1.0 are displayed.
– Files that have been altered, edited or saved with computer picture
editing software may not be displayed.
This unit cannot display moving pictures, MOTION JPEG and other
such formats, still pictures other than JPEG (e.g. TIFF), or play
pictures with attached audio.
[MPEG4] (Extension: “.ASF”, “.asf”)
Disc: DVD-R/RW, CD-R/RW
The recording date may differ from that of the actual date.
[DivX] (Extension: “.DIVX”, “.divx”, “.AVI”, “.avi”)
Disc: DVD-R/R DL/RW, CD-R/RW
DivX files greater than 2 GB or have no index may not be played
properly on this unit.
This unit supports all resolutions up to maximum of 720k480
(NTSC)/720k576 (PAL).
You can select up to 8 types of audio and subtitles on this unit.
20
SC-PT580-880EP-RQTX1111-R_eng.book Page 20 Monday, December 28, 2009 5:29 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

Panasonic SCPT880EP Návod na obsluhu

Kategória
Blu-Ray prehrávače
Typ
Návod na obsluhu
Táto príručka je tiež vhodná pre