LIVARNO 385778 Návod na obsluhu

Značka: LIVARNO

Model: 385778

Typ: Návod na obsluhu

IAN 385778_2110 8

EDI Light GmbH

Heiligkreuz 22

6136 Pill

AUSTRIA

Last Information Update · Version des

informations · Stand van de informatie · Stan infor-

macji · Stav informací · Stav informácií · Estado de

las informaciones · Tilstand af information: · Stand

der Informationen: 02/2022 Ident.-No.:

56043022022-8

Packaging

FSC® C148090

MIX

IAN 385778_2110

LED CLAMP LAMP

LUCE A MORSETTO A LED

Istruzioni di installazione, funzionamento e sicurezza

GB IE

LED CLAMP LAMP

Assembly, operating and safety instructions

FR BE

LAMPE À PINCE À LED

Instructions de montage, d‘utilisation et consignes de sécurité

LUZ DE PINZA LED

Instrucciones de montaje, de uso y de seguridad

NL BE

LED KLEMLICHT

Montage-, bedienings- en veiligheidsinstructies

LED KLEMME LAMPE

Monterings-, betjenings- og sikkerhedshenvisninger

SVETLOBA LED SPONKE

Navodila za namestitev, uporabo in varnost

SVETLO LED NA UPINANIE

Pokyny pre montáž, obsluhu a bezpečnostné pokyny

LED BILINCSFÉNY

Telepítési, üzemeltetési és biztonsági utasítások

LAMPA ZACISKOWA LED

Wskazówki montażu, obsługi i bezpieczeństwa

SVITIDLO S LED SVORKAMI

Pokyny k montáži, obsluze a bezpečnostní pokyny

LED-KLEMMLEUCHTE

Montage-, Bedienungs- und Sicherheitshinweise

DE AT CH

GB IE

Before reading, unfold the two pages with the illustrations and then familiarise yourself with all the functions of the unit.

Prima di leggere aprire le due pagine con le immagini e prendere confidenza con le diverse funzioni dell’apparecchio.

FR BE

Avant de lire le mode d‘emploi, ouvrez les deux pages contenant les illustrations et familiarisez-vous ensuite avec toutes

les fonctions de l‘appareil.

Antes de leer, despliegue las dos páginas con las ilustraciones y luego familiarícese con todas las funciones del aparato.

familiarícese con todas las funciones del aparato.

NL BE

Vouw vóór het lezen de beide pagina‘s met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Før du læser, vend begge sidene med billeder frem og bliv bekendt med alle apparatets funktioner.

Před čtením si odklopte obě dvě strany s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred branjem odprite dve strani z ilustracijami in se nato seznanite z vsemi funkcijami naprave.

Pred čítaním si odklopte obidve strany s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Olvasás előtt hajtsa ki az ábrákat tartalmazó két oldalt, majd ismerkedjen meg a készülék összes funkciójával.

Przed przeczytaniem proszę rozłożyć obie strony z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

DE AT CH

Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

GB/IE Assembly, operating and safety instructions Page 5

IT Istruzioni di montaggio, funzionamento e sicurezza Pagina 13

FR/BE Instructions de montage, d’utilisation et de sécurité Page 21

ES Instrucciones de montaje, funcionamiento y seguridad Página 29

NL/BE Montage-, bedienings- en veiligheidsvoorschriften Strona 37

DK Monterings-, betjenings- og sikkerhedsanvisninger Side 45

CZ Montážní, provozní a bezpečnostní pokyny Strana 53

SI Navodila za montažo, uporabo in varnost Stran 61

SK Montážne, prevádzkové a bezpečnostné pokyny Strana 71

HU Összeszerelési, üzemeltetési és biztonsági utasítások Stran 79

PL Instrukcja montażu, obsługi i bezpieczeństwa Strona 89

DE / AT / CH Montage-, Bedienungs- und Sicherheitshinweise Seite 97

56043

ON/OFF

5GB/IE

List of pictograms used* ................................................................................... Page 6

Introduction ......................................................................................................... Page 6

Intended use ........................................................................................................ Page 6

Scope of delivery ................................................................................................ Page 7

Parts Description ................................................................................................. Page 7

Technical Data .................................................................................................... Page 7

Safety ................................................................................................................... Page 7

Safety instructions ................................................................................................ Page 7

Initial use ............................................................................................................ Page 9

Checking the lamp and the delivery contents ......................................................... Page 9

Operation ........................................................................................................... Page 9

Setting up the lamp .............................................................................................. Page 9

Switching the lamp on/off ................................................................................... Page 9

Inserting / replacing the bulb ............................................................................... Page 9

Storage ................................................................................................................ Page 10

Maintenance and Cleaning .............................................................................. Page 10

Disposal ............................................................................................................... Page 10

Declaration of Conformity ................................................................................ Page 10

Warranty and service ....................................................................................... Page 11

Warranty ............................................................................................................ Page 11

Service address ................................................................................................... Page 11

Warranty card ..................................................................................................... Page 12

LED clamp lamp

Introduction

Congratulations on the purchase of your

new product. You have chosen a

highquality product. Please be sure to

carefully read all the instructions for use. Fold out

the page with the diagrams. These instructions are

part of the product and contain important

information on setup and operation. Always ob-

serve all safety instructions. Before using this prod-

uct for the first time, verify that the correct voltage

is present and that all parts are properly installed.

If you have any questions or are unsure about

operating the product, please contact your retailer

or the service centre. Please keep these instructions

in a safe place and include them when passing this

product on to others.

Intended use

This lamp is only suitable for indoor use

in dry and enclosed spaces. This product

is only intended for private household

use.

6 GB/IE

List of pictograms used*

Please read the operating instructions!

Safety notes

Instructions for use

The lamp is only intended for use as

lighting in dry, indoor locations.

VVolt

Alternating current/voltage

Hz Hertz (frequency)

WWatts (effective power)

Ra Colour rendering index of the LED

Lighting

lm Lumen

KKelvin

IP20 No protection against water!

For your safety

Observe the warnings and safety

notes!

Danger to life and risk of accidents for

infants and children!

Warning! Danger of electric shock!

Beware of hot surfaces!

Protection class II

Thread E14

This LED table lamp is not dimmable.

Product complies with the product-specific

applicable European directives.

TÜV SÜD/GS tested

PAP

Dispose of the packaging and product in

an environmentally-friendly manner!

* Further details, e.g. additional symbol explanations and

technical information, can be found at

www.edi-light.com

Delivery contents

Always check that all the parts are present and that

the product is in perfect condition immediately after

unpacking.

1 LED clamp light

1 Bracket with screw clamp

1 Set of operating instructions

1 LED bulb

Parts description

1 Luminaire head

2 Luminaire arm

3 Bracket

4 Screw terminal

5 Toggle switch

6 Mains plug

7 LED lamp

8 Locking screw

Technical data

Item number: 56043 (EU-Plug)

Operating voltage: 220-240 V~, 50/60 Hz

Protection class: II /

Power: E14, max. 18 W

LED light source: E14, 4,9W; 3000K;

470lm(360°); Ra=80

Dimensions: Height: ca 53 cm

Cable length: 160 cm

The LED lamps in these

luminaires can be replaced

by the end customer.

Distributor:

EDI Light GmbH

Heiligkreuz 22, 6136 Pill

AUSTRIA

www.edi-light.com

Safety

Safety instructions

Damage due to failure to comply with these

operating instructions will void the warranty! We

assume no liability for consequential damage!

We assume no liability for property damage or

personal injury due to improper handling or failure

to observe the safety instructions!

WARNING! DANGER OF ELECTRIC

SHOCK!

A faulty electrical installation or a supply

voltage which is too high may lead to an

electrical shock.

■Do not open the housing; repairs must be

carried out by a professional. Contact a spe-

cialist workshop for this purpose. Unauthorised

repairs, incorrect connection or improper use

will void all warranty and liability claims.

■When repairing the product, only use parts

which meet the original specifications. This

lamp contains electrical and mechanical parts

which are vital to prevent safety hazards.

■Do not connect the lamp to an external dimmer.

■If you notice any abnormalities during oper-

ation (e.g. unusual noises, strange smell or

smoke), switch off the product immediately and

disconnect it from the power supply by pulling

out the mains plug or switching off the circuit

breaker (0 position). Do not use the product

until it has been checked by a competent

person.

■Do not operate the fixture if it has visible

damage or if the connecting cable or mains

plug is defective.

■If the connecting cable of the luminaire is

damaged, it must be replaced by the manu-

facturer or its after-sales service or a similarly

qualified person in order to avoid hazards.

■Do not open the housing, but leave the repair

to specialists. Contact a specialist workshop for

this purpose. Liability and warranty claims are

7GB/IE

excluded in the event of repairs carried out in-

dependently, improper connection or incorrect

operation.

■Only parts that correspond to the original

device data may be used for repairs. There

are electrical and mechanical parts in this

luminaire that are essential for protection

against sources of danger.

■Do not operate the fixture with an external

timer or a separate remote control system.

■Do not connect the lamp to an external dimmer.

■Do not immerse the lamp, the connecting cable

or the mains plug in water or other liquids.

■Never touch the mains plug with wet hands.

■Never pull the mains plug out of the socket by

the connecting cable, always grasp the mains

plug.

■Never use the connection cable as a carrying

handle.

■Keep the lamp, the mains plug and the con-

nection cable away from open flames and hot

surfaces.

■Lay the connection cable so that it does not

become a tripping hazard.

■Do not bend the connection cable and do not

lay it over sharp edges.

■Only use the luminaire indoors. Never operate

it in damp rooms or in the rain.

■Never store the luminaire in such a way that it

can fall into a bathtub or washbasin.

■Never reach for an electrical appliance if it has

fallen into the water. In such a case, immediate-

ly pull the mains plug out of the socket.

■When you are not using the lamp, cleaning it

or if a malfunction occurs, always switch off

the lamp and disconnect the mains plug from

the socket.

■WARNING! DANGER TO

LIFE AND RISK OF ACCIDENT

FOR INFANTS AND

CHILDREN!

This product may be used by children aged 8

and over as well as by persons with physical,

sensory or mental impairments or lacking

experience and knowledge provided that they

are supervised or instructed in the safe use of

the product and that they understand the

associated risks. Do not allow children to play

with the product. Cleaning and user

maintenance must not be performed by

children without supervision.

■Do not allow children to play with the lamp.

■Do not allow children to play with the

packaging film. Children can get entangled in

the packaging whilst playing and suffocate.

■Keep children under 8 years of age away from

the lamp.

■Never leave the lamp unattended whilst it is

switched on.

NOTE: RISK OF DAMAGE!

The lamp may be damaged if used improperly.

■Place the lamp on an easy to access, level,

dry, heat-resistant and sufficiently stable work

surface.

■To prevent a heat build-up, do not place the

lamp directly against a wall or under wall

cabinets or similar.

■Never place the lamp on or near hot surfaces

(hobs, etc.).

■Never expose the lamp to high temperatures

(radiators, etc.) or the weather (rain, etc.).

■Never immerse the lamp in water to clean, or

use a steam cleaner. The lamp may otherwise

be damaged.

■Never put the lamp in the dishwasher. This

would break the lamp.

■Discontinue use of the lamp if the plastic parts

of the lamp are cracked or deformed. Always

replace damaged parts with genuine spare

parts.

■Avoid the risk of fatal injury

from electric shock

■Never use the product if it is damaged in any

way.

8 GB/IE

■Avoid contact of the lamp with water or other

liquids at all costs.

■Never open any of the electrical equipment

or insert any objects into this equipment. Such

interferences pose a risk of fatal injury from

electric shock.

■Before mounting, make sure that the existing

mains voltage matches the required operating

voltage of the mains adapter (see “Technical

data”).

■Be sure not to damage any wires during

installation.

■Do not install the light on damp or conductive

surfaces.

Prevent fire and injury hazards

CAUTION! RISK OF BURNS DUE

TO HOT SURFACES! To prevent burns,

ensure that the product has been switched

off and has cooled down before touching the LED

light. Illuminants become very hot.

■Do not look directly into the light source. Do not

look at the light source with an optical instrument

(e.g. magnifying glass).

■Replace defective lamps with new ones

immediately. Before replacing the bulb, make

sure that the luminaire is not live. To do this,

disconnect the mains plug from the socket or

switch off the circuit breaker in the fuse box (0

position).

■Allow the lamp to cool for at least 15 minutes

before replacing a defective bulb.

■Do not cover the lamp with objects. Fire can result

from excessive heat development.

■Never use the connection cable to support the

weight of the product.

■If any doubts arise during installation /

operation of the product, consult a competent

electrician.

Initial use

Checking the lamp and the

delivery contents

Be careful when opening the packaging:

1. Remove the lamp from the packaging.

2. Check that all items included in the delivery

contents are present (see diagram).

3. Remove all packaging material.

4. Check to see if the lamp or the individual parts

are visibly damaged. Do not use the lamp if

you detect any type of damage. Contact the

manufacturer using the service address stated.

Operation

Setting up the lamp

1. Attach the bracket 3 to a table top ≤ 5cm with

the screw clamp 4. (Fig. 1) The bracket 3 is not

suitable for attachment to pipes.

2. Insert the lamp arm 2 into the hole of the

holder 3. Make sure that the lamp arm 2 is

securely seated in the holder 3. Fix the lamp arm

with the locking screw 8 (Fig. 2).

3. Now insert the LED lamp 7 into the lamp head

1 by turning it clockwise. (Fig. 3)

4. Turn the lamp head 1 to the desired position.

(Fig. 4)

5. Insert the mains plug 6 into a properly installed

socket. (Fig. 5)

Switching the lamp on/off

□Operate the toggle switch 5 on the lamp to

switch it on/off.

Inserting / replacing the bulb

1. Allow the fixture to cool down for at least 15

minutes before replacing a faulty bulb.

2. Unscrew the defective lamp 7 from the lamp

head 1 by turning it anticlockwise.

3.Screw the new lamp 7 into the lamp head 1

by turning it clockwise.

Storage

9GB/IE

All parts must be completely dry prior to storage.

□Always store the lamp in a dry location.

□Protect the lamp from direct sunlight.

□Store the lamp out of reach of children, locked

aware securely and at a storage temperature

between +5 °C and +20 °C (room

temperature).

□Place the lamp in the original packaging or a

box of the same size

Maintenance and cleaning

WARNING! DANGER OF ELECTRIC

SHOCK! Always disconnect the product

from the mains before cleaning.

WARNING! DANGER OF

ELECTRIC SHOCK! To ensure

electrical safety, never clean the product

with aggressive detergents or immerse it in water.

CAUTION! RISK OF BURNS DUE

TO HOT SURFACES! Allow the LED

light to cool off completely.

WARNING! RISK OF SHORT CIRCUIT!

Water or other liquids inside the housing may

cause a short circuit.

■Do not allow water or other liquids to enter the

housing.

■Never immerse the lamp in water or other

liquids.

NOTE: RISK OF DAMAGE!

The lamp may be damaged if used improperly.

■Do not use aggressive cleaning agents, brushes

with metal or nylon bristles, or sharp or metal

cleaning objects such as metal sponges, etc.

These can damage the surfaces.

■Never put the lamp in the dishwasher. This

would break the lamp.

1. Unplug the mains plug from the socket

before cleaning.

2. Allow the lamp to cool down completely.

3. Wipe the lamp clean with a damp cloth. Then

allow all parts to dry completely.

Disposal

The packaging is made entirely of recyclable

materials, which you may dispose of at local

recycling facilities.

Observe the marking of the packaging

materials for waste separation, which

are marked with abbreviations (a) and

numbers (b) with following meaning: 1–7:

plastics / 20–22: paper and fibreboard /

80–98: composite materials.

The product and packaging materials

are recyclable, dispose of it separately

for better waste treatment. The Triman

logo is valid in France only.

Contact your local refuse disposal

authority for more details of how to

dispose of your worn-out product.

To help protect the environment, please

dispose of the product properly when it

has reached the end of its useful life and

not in the household waste. Information on

collection points and their opening hours can be

obtained from your local authority.

Declaration of conformity

This product fulfils the requirements of

the applicable European and national

directives. The relevant declarations and

documents are held by the manufacturer.

We reserve the right to make technical and visual

changes to the product in the interest of product

improvement. Typographical and printing errors

excepted.

This product contains a light source of energy

efficiency class F.

Warranty and service

10 GB/IE

11GB/IE

Warranty

We provide a 3-year warranty from the date of

purchase. Our products are manufactured using

modern production methods and are subject to

precise quality control. We guarantee that this

product is in perfect condition. During the warranty

period we will remedy any defects in material or

manufacture free of charge. In the event of an

unexpected defect, please return the carefully

packaged product to the service address specified.

The warranty does not extend to damage due to

improper opertion, or to wear parts and

consumables. These can be ordered from the

telephone number listed for a charge. Repairs not

covered by the warranty (e.g. light bulbs) may also

be requested at cost price from the service address

listed. The product will be repaired at the specified

service location. Timely processing and returns can

only be ensured by sending the product directly to

this address. If you would like additional product

information, need to order accessories or if you

have a question about the service process, please

contact our customer service department on the

telephone number specified. Please include the

item number (see “Technical data“) when enquiring

about the product.

IAN 385778_2110

Please have your receipt and item number (e.g.

IAN 123456_7890) ready as your proof of

purchase when enquiring about the product.

Service address

Great Britain & Ireland

EGLO UK LTD.

Unit 12 Cirrus Park, Lower Farm Road, Moulton

Park Industrial Estate, NORTHAMPTON NN3 6UR

T: +44 1604 790 986

E: [email protected]

12 GB/IE

Warranty card

Return address:

Name/First name:

Country/Postal code/City/Street address:

Phone number:

Item number/Description:

Purchase date/Point of purchase:

Description of the defect:

Date/Signature:

Non-warranty cases:

Please return the un-repaired item, carriage paid.

Please inform me of the costs. Repair the product for a fee.

13IT

Legenda dei pittogrammi utilizzati* .......................................................... Pagina 14

Introduzione ................................................................................................... Pagina 14

Uso previsto .................................................................................................. Pagina 14

Ambito di consegna ....................................................................................... Pagina 15

Descrizione delle parti .................................................................................... Pagina 15

Dati tecnici .................................................................................................... Pagina 15

Sicurezza ....................................................................................................... Pagina 15

Istruzioni di sicurezza ..................................................................................... Pagina 15

Commissioning ............................................................................................. Pagina 17

Controllare l’apparecchio e la fornitura ........................................................... Pagina 17

Operazione ................................................................................................... Pagina 17

Impostare l’apparecchio .................................................................................. Pagina 17

Accensione e spegnimento dell’apparecchio .................................................... Pagina 18

Sostituzione della lampadina .......................................................................... Pagina 18

Stoccaggio ...................................................................................................... Pagina 18

Manutenzione e pulizia ..............................................................................Pagina 18

Smaltimento .................................................................................................. Pagina 19

Dichiarazione di conformità ...................................................................... Pagina 19

Informazioni/garanzia ............................................................................... Pagina 19

Garanzia ...................................................................................................... Pagina 19

Indirizzo di servizio ....................................................................................... Pagina 20

Scheda di garanzia ....................................................................................... Pagina 20

Apparecchio a morsetto a LED

Introduzione

Congratulazioni per l’acquisto della tua

nuova lampada da tavolo a LED. (qui di

seguito denominato anche “prodotto” o

“apparecchio”). Avete scelto un prodotto di alta

qualità. Si prega di leggere queste istruzioni per

l’uso completamente e attentamente. Piegare la

pagina con il piegare la pagina con le

illustrazioni. Queste istruzioni per l’uso fanno

parte di questo prodotto e contengono importanti

informazioni sulla messa in funzione e sull’uso.

Osservare sempre tutte le istruzioni di sicurezza.

Prima della messa in funzione, controllare che sia

presente la tensione corretta e che tutte le parti

siano montate correttamente. In caso di domande

o dubbi sull’uso del prodotto, contattare il proprio

rivenditore o centro di assistenza. Conservare

queste istruzioni per l’uso in un luogo sicuro e

trasmetterle a terzi se necessario.

Uso previsto

Questo apparecchio è adatto solo per

funzionamento all’interno, in ambienti

asciutti e chiusi. L’elettricista che installa

il prodotto deve assicurarsi che il prodotto non sia

14 IT

Legenda dei pittogrammi utilizzati*

Leggete le istruzioni!

Istruzioni di sicurezza

Istruzioni per l’azione

Questo apparecchio è adatto solo per uso

interno in ambienti asciutti e chiusi.

VVolt

Corrente/tensione AC

Hz Hertz (frequenza)

WWatt (potenza attiva)

Ra Indice di resa cromatica del LED

Illuminazione

lm Lumen

KKelvin

IP20 Classe di protezione: nessuna protezi-

one contro l’acqua! Adatto solo per uso

interno.

Per la vostra sicurezza!

Osservare le istruzioni di avvertimento e

di sicurezza!

Pericolo di vita e incidenti per neonati e

bambini!

Attenzione!

Rischio di scossa elettrica!

Attenzione alle superfici calde!

Classe di protezione II

Filo E14

Questa lampada da tavolo a LED non è

dimmerabile.

Il prodotto è conforme alle specifiche del

prodotto europeo applicabile direttive.

Testato da TÜV SÜD/GS

PAP

Smaltire l’imballaggio e l’apparecchio in

modo ecologico!

* Per ulteriori dettagli, ad esempio spiegazioni aggiuntive

dei simboli o informazioni tecniche, si possono trovare su

www.edi-light.com

installato su una superficie umida o conduttiva!

Questo prodotto è destinato esclusivamente all’uso

in abitazioni private.

Ambito di consegna

Subito dopo il disimballaggio, controllate sempre

che la fornitura sia completa e che il prodotto sia in

perfetto stato.

1 luce a morsetto a LED

1 staffa con terminale a vite

1 manuale di istruzioni

1 lampadina a LED

Descrizione delle parti

1 Testa dell’apparecchio

2 Braccio dell’apparecchio

3 Staffa

4 Terminale a vite

5 Interruttore a levetta

6 Spina di rete

7 Lampada a LED

8 Vite di bloccaggio

Dati tecnici

Numero di articolo: 56043 (EU-Spina)

Tensione di

funzionamento: 220-240 V~, 50/60 Hz

Classe di protezione: II /

Versione: E14, max. 18 W

Sorgente luminosa a

LED: E14, 4,9W; 3000K;

470lm(360°); Ra=80

Dimensioni: Altezza: circa 53 cm

Lunghezza del cavo: 160

La sorgente luminosa di

questo apparecchio può

essere sostituita dal cliente

finale.

Distributore:

EDI Light GmbH

Heiligkreuz 22, 6136 Pill

AUSTRIA

www.edi-light.com

Sicurezza

Istruzioni di sicurezza

Danni causati dall’inosservanza di queste norme

operative le istruzioni per l’uso invalidano la

garanzia! Non si accetta alcuna responsabilità per

i danni conseguenti! In caso di danni alla proprietà

o danni causati da un trattamento improprio o

dall’inosservanza trattamento improprio o

inosservanza del si declina ogni responsabilità per

danni alle cose o alle persone causati da un uso

improprio o dall’inosservanza delle istruzioni di

sicurezza!

ATTENZIONE! RISCHIO DI SCOSSA

ELETTRICA!

Un’installazione elettrica difettosa o una

tensione di rete eccessiva possono portare a

scosse elettriche.

■Collegare la spina di rete solo se la tensione di

rete della presa corrisponde alla specifica sulla

targhetta del prodotto.

■Collegare la spina di rete solo ad una presa

facilmente accessibile in modo da poter

staccare rapidamente l’apparecchio dalla rete

in caso di guasto.

■Se si notano anomalie durante il

funzionamento (ad esempio rumori insoliti,

odore strano o fumo), spegnere

immediatamente il prodotto e scollegarlo

dall’alimentazione estraendo la spina di rete o

spegnendo l’interruttore automatico (posizione

0). Non utilizzare il prodotto prima che sia

stato controllato da una persona competente.

■Non mettere in funzione l’apparecchio se

presenta danni visibili o se il cavo di

collegamento o la spina di rete sono difettosi.

■Se il cavo di collegamento dell’apparecchio

è danneggiato, deve essere sostituito dal

15IT

produttore o dal suo servizio post-vendita o da

una persona altrettanto qualificata per evitare

pericoli.

■Non aprite l’alloggiamento, ma lasciate la

riparazione agli specialisti. Contattate

un’officina specializzata per questo sco-

po. La responsabilità e i diritti di garanzia

sono esclusi in caso di riparazioni eseguite

autonomamente, di collegamento improprio o

di funzionamento errato.

■Solo le parti che corrispondono ai dati orig-

inali del dispositivo possono essere utilizzate

per le riparazioni. In questo apparecchio ci

sono parti elettriche e meccaniche che sono

essenziali per la protezione contro le fonti di

pericolo.

■Non far funzionare l’apparecchio con un

timer esterno o un sistema di controllo remoto

separato.

■Non collegare la lampada a un dimmer

esterno.

■Non immergere l’apparecchio, il cavo di

collegamento o la spina di rete in acqua o altri

liquidi.

■Non toccare mai la spina di rete con le mani

bagnate.

■Non estrarre mai la spina di rete dalla presa

per il cavo di collegamento, afferrare sempre

la spina di rete.

■Non usare mai il cavo di collegamento come

maniglia di trasporto.

■Tenere la lampada, la spina di alimentazione

e il cavo di collegamento lontano da fiamme

aperte e superfici calde.

■Posare il cavo di collegamento in modo che

non diventi un pericolo di inciampo.

■Non piegare il cavo di collegamento e non

posarlo su spigoli vivi.

■Utilizzare l’apparecchio solo in interni. Non

usarlo mai in stanze umide o sotto la pioggia.

■Non conservare mai la lampada in modo che

possa cadere in una vasca da bagno o in un

lavandino.

■Non prendere mai un apparecchio elettrico se

è caduto in acqua. In tal caso, estrarre

immediatamente la spina di rete dalla presa.

■Quando non utilizzate la lampada, la pulite o

se si verifica un malfunzionamento, spegnete

sempre la lampada e scollegate la spina di

alimentazione dalla presa.

■ATTENZIONE! PERICOLO

DI VITA E DI INCIDENTI PER

BAMBINI E RAGAZZI!

Questo prodotto può essere utilizzato da

bambini di età pari o superiore a 8 anni e da

persone con ridotte capacità fisiche, sensoriali

o mentali o con mancanza di esperienza e

conoscenza se hanno ricevuto supervisione o

istruzioni sull’uso del prodotto in modo sicuro e

comprendono i pericoli connessi. I bambini non

devono giocare con il prodotto. La pulizia e la

manutenzione dell’utente non devono essere

eseguite dai bambini senza supervisione.

■I bambini non devono giocare con

l’apparecchio.

■Non lasciare che i bambini giochino con la

pellicola d’imballaggio. I bambini

possono rimanerci impigliati mentre giocano e

soffocare.

■Tenere i bambini più piccoli di 8 anni lontano

dalla luce.

■Non lasciare la luce incustodita durante il

funzionamento.

NOTA: RISCHIO DI DANNI!

L’uso improprio dell’apparecchio può provocare

danni all’apparecchio.

■Posizionare l’apparecchio su una superficie di

lavoro facilmente accessibile, piana, asciutta,

resistente al calore e sufficientemente stabile.

Non posizionare l’apparecchio sul bordo o sul

bordo della superficie di lavoro.

■Evitare l’accumulo di calore non posizionando

l’apparecchio direttamente contro una parete o

sotto armadi a muro o simili.

■Non mettere mai la lampada su o vicino a

16 IT

Stránka sa načítava ...

LIVARNO 385778 Návod na obsluhu

Značka: LIVARNO

Model: 385778

Typ: Návod na obsluhu

Stiahnite si PDF

správa

V iných jazykoch

español: LIVARNO 385778 El manual del propietario
français: LIVARNO 385778 Le manuel du propriétaire
italiano: LIVARNO 385778 Manuale del proprietario
Nederlands: LIVARNO 385778 de handleiding
Deutsch: LIVARNO 385778 Bedienungsanleitung
polski: LIVARNO 385778 Instrukcja obsługi

LIVARNO 385778 Návod na obsluhu

LIVARNO 385778 Návod na obsluhu

V iných jazykoch

Súvisiace články