Parkside PWS 230 D4 Návod na používanie

ANGLE GRINDER / WINKELSCHLEIFER /

MEULEUSE D’ANGLE PWS 230 D4

MEULEUSE D’ANGLE

Traduction des instructions d’origine

WINKELSCHLEIFER

Originalbetriebsanleitung

ANGLE GRINDER

Translation of the original instructions

ÚHLOVÁ BRUSKA

Překlad originálního provozního návodu

HAAKSE SLIJPER

Vertaling van de originele gebruiksaanwijzing

UHLOVÁ BRÚSKA

Preklad originálneho návodu na obsluhu

SZLIFIERKA KĄTOWA

Tłumaczenie oryginalnej instrukcji obsługi

AMOLADORA ANGULAR

Traducción del manual de instrucciones original

VINKELSLIBER

Oversættelse af den originale driftsvejledning

SMERIGLIATRICE ANGOLARE

Traduzione delle istruzioni d’uso originali

SAROKCSISZOLÓ

Az originál használati utasítás fordítása KOTNI BRUSILNIK

Prevod originalnega navodila za uporabo

IAN 384506_2107

GB / IE Translation of the original instructions Page 1

DE / AT / CH Originalbetriebsanleitung Seite 17

FR / BE Traduction des instructions d’origine Page 33

NL / BE Vertaling van de originele gebruiksaanwijzing Pagina 51

CZ Překlad originálního provozního návodu Strana 67

PL Tłumaczenie oryginalnej instrukcji obsługi Strona 83

SK Preklad originálneho návodu na obsluhu Strana 99

ES Traducción del manual de instrucciones original Página 115

DK Oversættelse af den originale driftsvejledning Side 131

IT Traduzione delle istruzioni d’uso originali Pagina 147

HU Az originál használati utasítás fordítása Oldal 163

SI Prevod originalnega navodila za uporabo Stran 179

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec

toutes les fonctions de l‘appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas

las funciones del dispositivo.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Prima di leggere aprire la pagina con le immagini e prendere conﬁdenza con le diverse funzioni

dell‘apparecchio.

Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik funkcióját.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

BA

DC

E

I

0

F

G

PWS 230 D4 GB│IE │ 1 ■

Contents

Introduction ............................................................2

Intended use ........................................................................2

Features ...........................................................................2

Package contents ....................................................................2

Technical data ......................................................................2

General Power Tool Safety Warnings ......................................3

1. Work area safety ..................................................................3

2. Electrical safety ...................................................................3

3. Personal safety ....................................................................4

4. Power tool use and care ............................................................4

5. Service ..........................................................................5

Safety instructions for all applications ....................................................5

Kickback and corresponding safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Special safety instructions for grinding and abrasive cutting ...................................7

Additional special safety instructions for abrasive cutting .....................................7

Permissible accessories ................................................................8

Storage and handling of the recommended accessory tools ...................................8

Working procedures ..................................................................8

Use ..................................................................10

Mounting/adjusting the blade guard ....................................................10

Fitting the additional handle ...........................................................10

Fitting/changing the roughing/ cutting disc ...............................................10

Switching on and oﬀ ................................................................11

Turning the appliance handle ..........................................................11

Maintenance and cleaning ...............................................12

Cleaning the dust ﬁlters ..............................................................12

Disposal ..............................................................12

Kompernass Handels GmbH warranty ....................................13

Service ............................................................... 14

Importer .............................................................14

Translation of the original Conformity Declaration ...........................15

PWS 230 D4

■ 2 │ GB│IE

ANGLE GRINDER PWS 230 D4

Introduction

Congratulations on the purchase of your new

appliance. You have chosen a high-quality product.

The operating instructions are part of this product.

They contain important information about safety,

usage and disposal. Before using the product,

please familiarise yourself with all operating and

safety instructions. Use the product only as

described and for the range of applications speci-

ﬁed. Please also pass these operating instructions

on to any future owner.

Intended use

The appliance is intended for the cutting and rough

cutting of metal materials, concrete and tiles

without the use of water. Any other usage of or

modiﬁcation to the appliance is deemed to be

improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for

damage(s) resulting from improper usage. The

appliance is not intended for commercial use.

Features

Appliance handle (rotatable)

ON/OFF switch

Safety lock-out

Release button

Cover for carbon brushes

Additional handle

Blade guard

Spindle locking button

Screw thread (3x) for the additional handle

Lever

Clamping nut (see ﬁg. C)

Attachment spindle (see ﬁg. C)

Attachment ﬂange (see ﬁg. C)

Two-hole mounting spanner (see ﬁg. D)

Screw

Filter cover

Dust ﬁlter

Package contents

1 angle grinder PWS 230 D4

1 additional handle

1 blade guard

1 two-hole mounting spanner

1 operating manual

Technical data

Rated voltage 230 V ∼, 50 Hz

(AC)

Rated power consumption 2000 W

Rated speed n 6500 rpm

Disc width Ø 230 mm

Thread size M14

Protection class II / (double

insulation)

Noise and vibration data

Noise measurement value determined in accord-

ance with EN 60745. The A-rated noise level of

the power tool is typically as follows:

Noise emission value

Sound pressure level LPA = 97 dB (A)

Uncertainty K= 3 dB

Sound power level LWA = 108 dB (A)

Uncertainty K= 3 dB

Wear hearing protection!

Total vibration value

Surface sanding Ah, AG = 5.087 m/s2

Uncertainty K = 1.5 m/s2

PWS 230 D4 GB│IE │ 3 ■

NOTE

► The vibration level speciﬁed in these instruc-

tions has been measured in accordance with

a standardised measuring procedure and can

be used for equipment comparisons. The

speciﬁed vibration emission value can also

be used to make an initial exposure estimate.

WARNING!

► The vibration level will vary according to the

use of the power tool and may sometimes be

higher than the value speciﬁed in these

instructions. Regular use of the power tool in

this way may cause the user to underestimate

the vibration. Try to keep the vibration loads

as low as possible. Measures to reduce the

vibration load are, e.g. wearing gloves and

limiting the working time. Wherein all states

of operation must be included (e.g. times

when the power tool is switched oﬀ and times

where the power tool is switched on but

running without load).

General Power Tool

Safety Warnings

WARNING!

► Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-op-

erated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b)

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entan-

gled cords increase the risk of electric shock.

e) When operating a power tool outdoors, only

use an extension cable suitable for outdoor

use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

PWS 230 D4

■ 4 │ GB│IE

3. Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites acci-

dents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that

cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage of

parts and any other condition that may aﬀect

the power tools operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g)

Use the power tool, accessories and tool

bits, etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

PWS 230 D4 GB│IE │ 5 ■

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) Always arrange for the replacement of the

plug or the power cord to be carried out by

the manufacturer of the appliance or by his

approved customer services. This will ensure

that the safety of the power tool is maintained.

Safety instructions for all

applications

Special safety instructions for grinding and

abrasive cutting

a) This power tool is to be used as a grinder and

abrasive cutting appliance. Please follow all

safety instructions, instructions, diagrams and

data that you receive with the appliance. If

you do not observe the following instructions,

this can lead to an electrical shock, ﬁre and/or

serious injuries.

b) This power tool is not suitable for sandpaper

sanding, working with a steel brush or

burnishing. Using the power tool for applica-

tions for which it is not designed can lead to

hazards and injuries.

c) Do not use any accessories that have not

been speciﬁcally provided or recommended

by the manufacturer for this power tool. Just

because you can attach the accessories to your

power tool does not guarantee they are safe to

use.

d) The maximum speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accesso-

ries that rotate faster than the permissible rate

can break and throw pieces into the air.

e) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of the power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

f) Attachment tools with a thread insert must

match the thread of the grinding spindle

exactly. For attachment tools that are

mounted using a ﬂange, the diameter of the

hole on the attachment tool must correspond

to the width of the ﬁtment on the ﬂange.

Accessory tools that do not exactly ﬁt on the

grinding spindle rotate unevenly, vibrate

severely and can lead to a loss of control.

g) Never use damaged accessory tools. Check

accessory tools such as grinding discs before

each use for chips or cracks, grinding plates

for cracks, wearing or excessive wear and

tear and wire brushes for loose or broken

wires. If the power tool or the accessory tool

in use is dropped, check to see if it is

damaged or use an undamaged accessory

tool. When you have checked and inserted

the accessory tool, ensure that you and any

other persons in the vicinity remain outside of

the level of the rotating accessory tool and

allow the tool to rotate at maximum speed for

one minute. Damaged accessories usually

break during the test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection or

goggles. Use a dust mask, hearing protec-

tion, protective gloves or special apron that

protect you from grindings and material parti-

cles as required. Protected your eyes from

ﬂying debris that may be created during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application. If

you are exposed to loud noise for any length of

time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe

distance to your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ and

cause injury – even outside the immediate

working area.

PWS 230 D4

■ 6 │ GB│IE

j) Hold the power tool only by the insulated

handles when you are carrying out work in

which the accessory tool may come into

contact with concealed power cables or the

tool’s own power cord. Contact with a live

cable can also make metal parts of the appli-

ance live and could result in an electric shock.

k) Keep the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get caught or cut and your

hand or arm could get caught in the rotating

accessory tool.

l) Never put the power tool down until the

accessory tool being used has come to a

complete standstill. The rotating accessory tool

can come into contact with the surface and

cause you to lose control of the power tool.

m) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to physical injury.

n) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

o) Never use the power tool in the vicinity of

inﬂammable materials. Sparks can ignite these

materials.

p) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to electric shock.

Kickback and corresponding safety

instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, grinding

plate etc., catches or jams. Catching or jamming

leads to an abrupt stop of the rotating accessory

tool. If this happens, an uncontrolled power tool

turns rapidly against the direction of rotation of the

accessory tool caught in the blockage.

If, for example, a grinding disc catches or jams in a

workpiece, the edge of the grinding disc projecting

into the workpiece can get caught and break oﬀ

the grinding disc or cause a kickback. The grinding

disc can then ﬂy in the direction of the operator or

away from him, depending on the direction of rota-

tion of the disc at the blockage. This can also break

grinding discs.

A kickback is caused by incorrect use or misuse of

the power tool. This can be avoided by taking

proper precautions as described below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so they can

absorb the force of a kickback. Always use

the additional handle, if available, so that

you have the maximum possible control over

the kickback force or reaction forces at full

speed. By taking adequate precautions, the

operator can stay in control of the kickback and

reaction torques.

b) Never hold your hand close to a rotating

accessory tool. The accessory tool could hit

your hand in the event of a kickback.

c) Avoid having any part of your body in the

region in which the power tool is likely to

move in event of a kickback. The kickback will

force the power tool in the opposite direction to

the direction of rotation of the grinding disc at

the blockage.

d) Take special care when working near

corners, sharp edges, etc. Avoid allowing the

accessory tool to bounce back from the work-

piece or jam. The rotating accessory tool is

more likely to jam in corners or sharp edges or

if it rebounds oﬀ them. This can cause a loss of

control or kickback.

PWS 230 D4 GB│IE │ 7 ■

e) Do not use chains or toothed saw blades.

Such accessories often cause a kickback or loss

of control over the power tool.

Special safety instructions for

grinding and abrasive cutting

a) Use only the grinding accessories approved

for your power tool and the appropriate

blade guard for these grinding tools.

Grinding tools that are not designed for the

power tool cannot be suﬃciently shielded and

are unsafe.

b) Oﬀset grinding discs must be ﬁtted so that the

grinding surface does not protrude over the

level of the blade guard edge. An improperly

ﬁtted grinding disc which protrudes over the

level of the blade guard edge cannot be prop-

erly guarded.

c) The blade guard must be securely mounted

on the power tool and adjusted to ensure

maximum safety so that the smallest possible

amount of the grinding tool is open to the

operator. The blade guard is designed to

protect the operator from fragments, accidental

contact with the grinding tool and sparks that

could ignite clothing.

d) Grinding tools should only be used for the

recommended applications.

For example: Never grind with the side

surface of a cutting disc. Cutting discs are

designed to remove material with the edge of

the disc. Any lateral application of force on

these grinding tools can lead to breakage.

e) Always use an undamaged clamping ﬂange

of the correct size and shape for the selected

grinding disc. Suitable ﬂanges support the

grinding disc and reduce the risk of disc

breakage. Flanges for cutting discs can be

diﬀerent to ﬂanges for other grinding discs.

f) Do not use worn grinding discs from larger

power tools. Grinding discs for larger power

tools are not designed for the higher rotational

speeds of smaller power tools and can break.

Additional special safety instructions

for abrasive cutting

a) Avoid causing blockages to the cutting disc or

high contact pressure. Do not make any

excessively deep cuts. Overloading the cutting

disc increases the stress and likelihood of tilting

or jamming and thus the possibility of kickback

or breakage of the grinding tool.

b) Avoid the area in front of and behind the

rotating cutting disc. When you move the

cutting disc away from yourself in the work-

piece, it is possible, in the event of a kickback,

that the power tool along with the rotating disc

might be thrown out directly towards you.

b) If the cutting disc jams or you stop working,

switch the tool oﬀ and hold it steadily in the

workpiece until the disc has completely

stopped turning. Never attempt to pull a

rotating cutting disc out of a cut. This could

lead to kickback. Identify and remove the

cause of the jam.

d) Do not switch the power tool back on while it

is located in the workpiece. Allow the cutting

disc to reach its full speed before you care-

fully continue the cut. Otherwise, the disc can

jam, jump out of the workpiece or cause kick-

back.

e) Support boards or large workpieces to

reduce the risk of the cutting disc jamming

and causing a kickback. Large workpieces can

bend under their own weight. The workpiece

must be supported on both sides of the disc:

both in the vicinity of the cutting disc and also

at the edge.

f) Be particularly careful when making "pocket

cuts" into existing walls or other obscured

areas. The inserted cutting disc may cut into

gas or water pipes, electrical wiring or other

objects that can cause kickback.

PWS 230 D4

■ 8 │ GB│IE

Permissible accessories

Max. diameter Ø (mm)

Max. thickness (mm)

Thread size (mm)

Speed (rpm)

Circumferential speed

(m/s)

Tool

Blade guard

Cutting disc 230 3 M14 6500 80 Two-hole assembly

spanner Yes

Roughing disc 230 6 M14 6500 80 Two-hole assembly

spanner Yes

Storage and handling of the recom-

mended accessory tools

■ Grinding tools are to be treated with care and

transported carefully.

■ Grinding tools should be stored in such a way

that they are not exposed to mechanical

damage or environmental inﬂuences (e.g.

moisture).

Working procedures

NOTE

► Grinding tools should only be used for the

recommended applications. Otherwise, they

can break, be damaged or cause injuries.

Rough grinding

Never use cutting discs

for rough grinding!

■Move the angle grinder with moderate pres-

sure back and forth over the workpiece.

■For soft material, move the rough grinding

disc at a shallow angle over the workpiece;

for hard material at a slightly steeper angle.

Abrasive cutting

Never use roughing discs

for cutting!

■Use only tested ﬁbre-reinforced cutting or

grinding discs that are approved for a circum-

ferential speed of not less than 80 m/s.

CAUTION!

► The grinder continues running after being

turned oﬀ. Do not try to brake it by applying

lateral counterpressure.

■Secure the workpiece! Use clamps/a vice to

hold the workpiece ﬁrmly in place. This is much

safer than simply holding it in your hand.

■Always switch oﬀ the appliance before

putting it away and wait for the appliance to

come to a complete standstill.

■Release the ON/OFF switch immediately in

the event of a power failure or when the plug

is pulled out. Move it into the OFF position. This

prevents an uncontrolled restart.

■Use the appliance only for dry cutting or

sanding.

■The additional handle must be mounted on

the appliance for all work.

■Materials containing asbestos may not be

processed. Asbestos is a known carcinogen.

PWS 230 D4 GB│IE │ 9 ■

Tip! This symbol indicates

proper behaviour.

DANGER! ALWAYS GUIDE THE

APPLIANCE THROUGH THE WORK-

PIECE IN REVERSE ROTATION.

► In the opposite direction there is a risk of

a kickback. The appliance can be pushed

out of the cut.

■Always switch the appliance on before

applying it to the workpiece. After completing

the task, lift the appliance from the workpiece

and then switch it oﬀ.

■Always hold the appliance ﬁrmly with two

hands while working. Ensure that your stance

is secure and stable.

■ For an optimum grinding eﬀect, move the appli-

ance evenly at an angle of 15° to 30°

(between grinding disc and workpiece) back-

wards and forwards.

■When working on angled surfaces, do not

exert great force on the workpiece. If the rota-

tional speed drops signiﬁcantly, you must

reduce the pressure exerted to allow safe and

eﬀective working. If the appliance suddenly

brakes completely or jams, it must be switched

oﬀ immediately.

■Cutting: Work at a moderate feed rate and

do not tilt the cutting disc.

■Roughing and cutting discs become very

hot – let them cool down completely before

touching them.

■Never use the appliance for purposes other

than the ones for which it was designed.

■Always make sure that the appliance is

turned oﬀ before plugging it into the wall

socket.

■In case of danger, remove the plug from the

socket immediately. Ensure that the appliance

and the power socket are easily and quickly

accessible in the event of an emergency.

■Always remove the plug from the power

socket during work breaks, when adjusting

the appliance and when it is no longer in use.

The appliance must be kept clean, dry and free

of oil and grease at all times.

■Remain alert at all times! Always pay atten-

tion to what you are doing and act with

common sense. Do not use the appliance if you

are distracted or feeling unwell.

WARNING!

Always wear safety goggles.

WARNING!

Always wear a dust mask!

PWS 230 D4

■ 10 │ GB│IE

Use

Mounting/adjusting the blade guard

WARNING! RISK OF INJURY!

► Always remove the plug from the power

socket before working on the appliance.

RISK OF INJURY!

► Always use the angle grinder with the blade

guard . The blade guard should be ﬁtted

securely. Set it so that the highest possible

degree of safety is achieved, i.e. the smallest

possible part of the grinding disc is open to

the operator. The blade guard is designed

to protect the operator from fragments and

accidental contact with the grinding tool.

► Make sure that the blade guard is ﬁtted

at least at the same angle as the additional

handle (see ﬁg. B). Otherwise, you could

cut injure yourself on the roughing disc or

cutting disc.

♦ Put the protective cover in the position shown

(see Fig. F). The protective cover can only be

put on or removed in this position. Turn the

protective cover until it clicks into place for the

ﬁrst time.

♦ Now pull the lever and turn the protective

cover into the required position (working

position) until it clicks into place.

♦ Check the secure seat of the protective

cover. The lever must be engaged and the

guard must not twist.

Fitting the additional handle

CAUTION!

► For safety reasons, this appliance may only

be used with the additional handle .

Failure to do this can lead to serious injury.

The additional handle can be screwed

onto the left or the right depending on the job

at hand.

Fitting/changing the roughing/

cutting disc

Always wear protective gloves when changing

cutting/rough grinding discs. Roughing and

cutting discs become very hot. Allow them to cool

down completely before touching them.

Pay attention to the dimensions of the roughing/

cutting disc. The diameter of the hole must ﬁt the

mounting ﬂange without any play. Do not use a

reducer or adapter.

■Check the roughing/cutting disc. It should

not be damaged or damp, and it should have

no cracks. Otherwise, it could break during use

and cause injuries.

NOTE

► Use only discs which are free of dirt.

■ Use only grinding discs whose permissible

speed rating is at least as high as that on the

type plate on the power tool.

■RISK OF INJURY! Press the spindle locking

button only when the mounting spindle

is at a complete standstill.

♦ Press the spindle locking button to lock the

spindle.

♦ Undo the clamping nut using the two-hole

mounting spanner (see ﬁg D).

♦ Place the rough grinding or cutting disc with

the label side towards the appliance on the

mounting ﬂange .

♦ Fitting the cutting disc:

Then replace the clamping nut on the attach-

ment spindle with the raised side facing up.

Fitting the roughing disc:

Then replace the clamping nut on the attach-

ment spindle with the raised side facing

down.

PWS 230 D4 GB│IE │ 11 ■

With thin grinding discs (see ﬁg. 1)

♦ The collar of the clamping nut faces upwards

so that a thin grinding disc can be ﬁtted safely.

12

≤ 3,2 mm

Fig. 1

♦ Press the spindle locking button to lock the

spindle.

♦ Tighten the clamping nut using the two-hole

mounting spanner .

With thick grinding discs (see ﬁg. 2)

> 3,2 mm

Fig. 2

The collar of the clamping nut faces downwards

so that a thick grinding disk can be ﬁtted securely

onto the mounting spindle .

♦ Lock the mounting spindle .

♦ Tighten the clamping nut in a clockwise

direction using the two-hole mounting

spanner .

NOTE

► If the disc does not turn smoothly or vibrates

after the change, the disc must be replaced

immediately.

♦ For safety's sake run the appliance at maximum

speed for 60 seconds after every disc change.

Be aware of unusual noises and sparks.

♦ Check whether all the fastening elements are

correctly ﬁtted.

♦ Make sure that the arrow showing the direction

of rotation (if any) on the cutting or rough

grinding discs (including diamond cutting discs)

and the direction of rotation of the appliance

(arrow showing the direction of rotation on the

head) match.

Switching on and oﬀ

Check the inserted tool before use. It must be

properly installed, may not be damaged or damp,

should have no cracks and turn freely. Carry out

a 60 second test run. Do not use non-circular or

vibrating tools. Be aware of unusual noises and

sparks. Check whether all the fastening elements

are correctly installed.

NOTE

► Always switch on the angle grinder before

making contact with the material, then apply

it to the workpiece.

Switching on

♦ Press the safety lock-out (see ﬁg. E).

♦ Then press the ON/OFF switch .

Switching oﬀ

♦ Let go of the ON/OFF switch .

Turning the appliance handle

■ The handle can be turned by 90° to the

right or left (see ﬁg. A).

■ This allows the ON/OFF switch to be moved

to the most suitable position depending on the

working conditions.

♦ Press the release button and turn the appli-

ance handle to the right or left.

♦ Allow the appliance handle to click into

place.

PWS 230 D4

■ 12 │ GB│IE

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch

the appliance oﬀ and remove the

power plug before starting any

work on the appliance.

■Do not use any sharp objects to clean the

appliance. Never permit liquids to enter

inside the appliance. Otherwise the appliance

could be damaged.

■ The carbon brushes should only be replaced by

the service centre or an authorised specialist

workshop.

Apart from this, the appliance is mainte-

nance-free.

■ Clean the appliance regularly, preferably imme-

diately after completion of the work.

■ Clean the housing with a dry cloth – do NOT

use petrol, solvents or cleaners which can attack

the plastic.

■ A vacuum cleaner is required for thorough

cleaning of the appliance.

■ Ventilation openings must never be obstructed.

■ Remove any sanding dust stuck to the appliance

with a brush.

NOTE

► Replacement parts not listed (such as carbon

brushes, switch) can be ordered via our

service hotline.

Cleaning the dust ﬁlters

The appliance has two dust ﬁlters , one on each

side. Check and clean the two dust ﬁlters regu-

larly. Proceed as follows (see ﬁg. G):

♦ Remove the screw using a standard Phillips

screwdriver (not in package contents).

♦ Remove the dust ﬁlter . Inspect it and clean if

necessary.

♦ Reassemble the appliance in the reverse order.

♦ Proceed in the same manner on the other side.

Disposal

The packaging consists of environ-

mentally friendly material. It can be

disposed of in local recycling

containers.

Do not dispose of power tools in

the normal domestic waste!

European Directive 2012/19/EU

requires that worn-out power tools are

collected separately and recycled in an environ-

mentally compatible manner.

Your local community or municipal authorities can

provide information on how to dispose of the

worn-out appliance.

Dispose of the packaging in an envi-

ronmentally friendly manner. Note

the labelling on the packaging and

separate the packaging material

components for disposal if necessary. The pack-

aging material is labelled with abbreviations (a)

and numbers (b) with the following meanings:

1–7: plastics, 20–22: paper and cardboard,

80–98: composites.

Your local community or municipal

authorities can provide information on

how to dispose of the worn-out product.

The product is recyclable, subject to

extended producer responsibility and is

collected separately.

PWS 230 D4 GB│IE │ 13 ■

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from

the date of purchase. If this product has any faults,

you, the buyer, have certain statutory rights. Your

statutory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will

be required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion).

This warranty service requires that you present the

defective appliance and the proof of purchase

(receipt) within the three-year warranty period,

along with a brief written description of the fault

and of when it occurred.

If the defect is covered by the warranty, your

product will either be repaired or replaced by us.

The repair or replacement of a product does not

signify the beginning of a new warranty period.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must

be reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or to fragile

parts which could be considered as consumable

parts such as switches or parts made of glass.

The warranty does not apply if the product has

been damaged, improperly used or improperly

maintained. The directions in the operating

instructions for the product regarding proper use

of the product are to be strictly followed. Uses

and actions that are discouraged in the operating

instructions or which are warned against must be

avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall

be deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

The warranty period does not apply to

■ Normal reduction of the battery capacity

over time

■ Commercial use of the product

■ Damage to or alteration of the product by the

customer

■ Non-compliance with safety and maintenance

instructions, operating errors

■ Damage caused by natural hazards

PWS 230 D4

■ 14 │ GB│IE

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(IAN) 384506_2107 available as proof of

purchase.

■ You will ﬁnd the item number on the type plate

on the product, an engraving on the product,

on the front page of the operating instructions

(below left) or on the sticker on the rear or

bottom of the product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

■ You can return a defective product to us free

of charge to the service address that will be

provided to you. Ensure that you enclose the

proof of purchase (till receipt) and information

about what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation

software at www.lidl-service.com.

This QR code will take you directly to the Lidl

service page (www.lidl-service.com) where you

can open your operating instructions by entering

the item number (IAN) 384506_2107.

NOTE

► For Parkside tools, please send us only the

defective item without the accessories (e.g.

battery, storage case, assembly tools, etc.).

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: [email protected]

IAN 384506_2107

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

PWS 230 D4 GB│IE │ 15 ■

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr. Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following

standards, normative documents and EC directives:

Machinery Directive

(2006/42/EC)

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)*

* The manufacturer bears the full responsibility for compliance with this conformity declaration. The object of the

declaration described above complies with the requirements of the Directive 2011/65/EU of the European

Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical

andelectronic appliances.

Applied harmonised standards

EN 60745-1:2009/A11:2010

EN 60745-2-3:2011/A13:2015

EN 55014-1:2017/A11:2020

EN 55014-2:2015

EN IEC 61000-3-2:2019

EN 61000-3-3:2013/A1:2019

EN IEC 63000:2018

Type designation of machine: Angle grinder PWS 230 D4

Year of manufacture: 12–2021

Serial number: IAN 384506_2107

Bochum, 22/10/2021

Semi Uguzlu

- Quality Manager -

We reserve the right to technical changes in the context of further product development.

PWS 230 D4

■ 16 │ GB│IE

Stránka sa načítava ...

Parkside PWS 230 D4 Návod na používanie

Parkside PWS 230 D4 Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty