Samsung HW-K550 Stručná príručka spustenia

Kategória
Plazmové televízory
Typ
Stručná príručka spustenia

Táto príručka je tiež vhodná pre

For further information, refer to the Web Manual.
Web manual : www.Samsung.com
Support
Product name search HW-K550 or HW-K551
User Manual
HW-K550
HW-K551
· 2 · English
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on
the apparatus.
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all times.
· 3 · English
PRECAUTIONS
1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification
sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with
enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the
unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn
off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long
period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage
the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit
to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong
magnetic or electric fields. Disconnect the power cable from the AC supply if the unit malfunctions. Your product is
not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored
in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached
room temperature before using.
5. The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash. Do not dispose of batteries in a fire. Do not short circuit,
disassemble, or overheat the batteries. There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type.
WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD,
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close securely, stop using the product and keep it away from
children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
· 4 · English
CHECKING THE COMPONENTS
Right Side of the Soundbar
Soundbar Main Unit
Top
2 AC/DC Adapter
3 Power Cord
Subwoofer
1 Power Cord
Remote Control / Battery
Optical Cable
Micro USB to
USB adapter Cable
c HDMI cable is sold separately. To purchase, contact a Samsung Service Centre or Samsung Customer Care.
CONNECTING ELECTRICAL POWER
Use the power components (1, 2, 3) to connect the power supplies in the following order:
Subwoofer Soundbar Main Unit
c For mor
e information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of Soundbar main unit)
POWER
POWER
Connecting
electrical power
D
MI IN
I OUT
-
ARC)
DC 24V
DC 24V
2 AC/DC Adapter
DC 24V (Power Jack)
3 Power Cord
Bottom of the Soundbar Main UnitRear of Subwoofer
1 Power Cord
c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is
hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter
and cause the Adapter to malfunction.
Y
T
· 5 · English
CONNECTING THE SUBWOOFER TO THE SOUNDBAR
MAIN UNIT
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.
Soundbar Main Unit
Subwoofer
i
t
So
S
The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main
unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the
subwoofer stops blinking and glows blue continuously.
c If the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not
automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.
c Important: Before you begin, put the battery into the remote. See page 14 for instructions.
POWER
1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer for 5 seconds.
The red indicator on the front of the subwoofer turns off and the blue indicator flashes rapidly.
3. Press the
button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.
4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then
disappears.
ID SET
· 6 · English
5. While the subwoofer's indicator is flashing blue, press the button on your remote control or on the right
side of Soundbar main unit to turn on the Soundbar main unit.
6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c For further information, refer to the Web Manual.
CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 14 for instructions.
Method 1. Connecting with a Cable
DIGITAL AUDIO IN
(OPTICAL)
Soundbar
Bottom of Soundbar
OPTICAL OUT
Optical Cable
Check the DIGITAL AUDIO IN
(OPTICAL) port of the
Soundbar main unit.
Check the OPTICAL OUT
port of your TV.
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with
a digital optical cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to
select the D.IN mode.
D.IN
c If TV sound is not output, press the button on the right side of your Soundbar or the SOURCE button
on the remote control to select the D.IN mode on Soundbar main unit display.
c If the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.
c Press the button on the remote control for 5 seconds to turn Auto Power Link on or off.
(Auto Power Link is set to ON by default.)
· 7 · English
Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)
1. Turn on your Samsung TV and the Soundbar.
2. Select TV mode in your Soundbar display by pressing the
button on the right side of the Soundbar or
the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN AUX
HDMI BT TV USB.)
3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote
control.
Samsung Audio Device detected.
Do you want to hear TV sound
through this device?
Yes No
Select <Yes> with your TV remote control.
4. The Soundbar outputs TV sound.
c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device, and set Add New Device to ON. Then, try again.
c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the
volume with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off
automatically when you turn the TV on or off by setting the Bluetooth POWER On function to On.
See page 15.
c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since
2012.
c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,
press the & button on your remote control for more than 5 seconds.
c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
c Do not place electronic devices or metallic objects on top of the product.
e.g., Wired/wireless router, set-top box, or modem.
c Placing the product on the floor may degrade wireless network performance, depending on the floor material.
· 8 · English
CONNECTION VIA BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
c It is not possible to connect multiple Bluetooth devices at the same time.
Connect
Bluetooth device
1. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to
select BT.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select "[AV] Samsung Soundbar Kxxx K-Series" from the list.
When the connection is established between the Soundbar and Bluetooth device, the front display
window of the Soundbar displays [Bluetooth device name] → BT.
4. Play music on the connected device.
[If failed to connect to the Bluetooth device / If device searching is needed again]
Delete the previous "[AV] Samsung Soundbar Kxxx K-Series" found by the Bluetooth device and have it
search for the Soundbar again.
c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
c The Soundbar automatically turns off after 5 minutes in the Ready state.
c The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
If there is a strong electrical field around the Soundbar.
If several Bluetooth devices are simultaneously paired with the Soundbar.
If the Bluetooth device is turned off, not in place, or malfunctions.
c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be
kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the Bluetooth device
Press the SOURCE button on the remote control or the button on the product's
rig
ht side to switch from
BT to another mode or turn off the Soundbar.
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
· 9 · English
CONNECTING TO AN EXTERNAL DEVICE
Optical Cable
You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by
connecting them to your Soundbar.
DIGITAL AUDIO IN
(OPTICAL)
Soundbar
Bottom of Soundbar
External Device
OPTICAL OUT
Optical Cable
1. Connect an Optical Cable as in the picture above.
2. Press the
button on the right side of your Soundbar or the SOURCE button on your remote control to
select D.IN mode.
3. The Soundbar shows D.IN on its display and output sound.
USB
You can play music files located on USB storage devices through the Soundbar.
Wi-Fi SETUP SPK ADD
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
HDMI IN
HDMI OUT
(TV-ARC)
DC 24V
USB (5V 0.5A)
Micro USB to
USB adapter Cable
USB port Display
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a
standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
2. Connect your USB device to the female end of the adapter cable.
3. Press the
button on the Soundbar main unit’s right side or the SOURCE button on the remote control to
select the USB mode.
4. USB appears on the display screen.
The Soundbar connection to the USB device is complete.
The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more
than 5 minutes.
· 10 · English
SOFTWARE UPDATE
Samsung may offer updates for the Soundbar's system firmware in the future.
Wi-Fi SETUP SPK ADD
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
HDMI IN
HDMI OUT
(TV-ARC)
DC 24V
USB (5V 0.5A)
Micro USB to USB adapter Cable
If an update is offered, you can update the firmware by connecting a USB device with the firmware update
stored on it to the USB port on your Soundbar.
For more information about how to download update files, go to the Samsung Electronics website at
(samsung.com/sec) search for the model name download the firmware from the customer support menu
option. The option name can vary.
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
I nstallation Precautions
Install on a vertical wall only.
Do not install the Soundbar system in a location with high temperature and/or humidity. Install the system on a
stable wall that can bear the weight of the Soundbar main unit.
Check the strength of the wall. To install the Soundbar system on a wall that may not bear the Soundbar main
unit weight, reinforce the wall before installation. If this is not possible, install the system on another wall, one
stable enough to bear the weight of the Soundbar main unit.
Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron
board, wood, etc.). If possible, fix the support screws into wall studs.
Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar
on.
Diameter : M5
Length: 35 mm or longer recommended.
Connect cables from the unit to external devices before you install it on the wall.
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
· 11 · English
Wallmount Components
(Wall Mount L) (Wall Mount R)
Bracket-Wall Mount (2 EA)
Holder-Screw (2 EA) Screw (2 EA)
A-TYPE : 616mm
B-TYPE : 360mm
CENTER LINE
A B B A
Wall Mount Guide
1. Place the Wall Mount Guide against the wall
surface.
The Wall Mount Guide must be level.
If your TV is mounted on the wall, install the
Soundbar at least 5 cm below the TV.
5 cm or more
2. Align the Paper Template's Centre Line with the
centre of your TV (if you are mounting the
Soundbar below your TV), and then fix the Wall
Mount Guide to the wall using tape.
c If you are not mounting below a TV, place the
Centre Line in the centre of the installation area.
Centre Line
A-TYPE : 616mm
B-TYPE : 360mm
CENTER LINE
A B B A
3. Push a pen tip or sharpened pencil tip through the
centre of the A-TYPE images on each end of the
Guide to mark the holes for the supporting
screws, and then remove the Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in
the wall at each marking.
c If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the holes
before you insert the support screws. If you use
anchors or mollies, make sure the holes you drill
are large enough for the anchors or mollies you
use.
A-TYP E : 616mm
B-TYPE : 360mm
CENTER LINE
A B B A
A-TYPE : 616mm
B-TYPE : 360mm
CENTER LINE
A B B
A
· 12 · English
5. Push a screw (not supplied) through each
Holder-Screw, and then screw each screw
firmly into a support screw hole.
6. Use the two Screws (M4 x L12) to attach both
Bracket-Wall Mount L and R to the Soundbar's
bottom. For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
When assembling, make sure the hanger part
of Bracket-Wall Mounts faces backwards.
Rear side of Soundbar
Right end of Soundbar
The left and right mounts are different shapes.
Make sure to position them correctly.
Wall Mount LWall Mount R
7. Install the Soundbar with the attached Bracket-
Wall Mounts by hanging the Bracket-Wall
Mounts on the Holder-Screws on the wall.
Slightly tilt the Soundbar to insert both
Holder-Screw heads into Bracket-Wall
Mount holes. Push the Soundbar in the
direction of the arrow to make sure both sides
are firmly fixed.
· 13 · English
D ETACHING THE SOUNDBAR
FROM THE WALL
1. To separate the Soundbar from the wall mount,
push it in the direction of the arrow, and then pull it
away from the wall as shown.
c Do not hang onto the installed unit and avoid
striking or dropping the unit.
c Secure the unit firmly to the wall so that it does
not fall off. If the unit falls off, it may cause an
injury or damage the product.
c When the unit is installed on a wall, please make
sure that children do not pull any of the
connecting cables, as this may cause it to fall.
c For the optimal performance of a wall mount
installation, install the speaker system at least
5 cm below the TV, if the TV is mounted on the
wall.
c For your safety, if you do not mount the unit on
the wall, install it on a secure, flat surface where it
is unlikely to fall.
· 14 · English
REMOTE CONTROL BUTTONS & FEATURES
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.

Controlling the Soundbar using Your TV Remote
Control
1. Press and hold the SOUND button for more than 5 seconds while
the Soundbar is turned on.
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
c Not available if the TV ARC function or HDMI mode is in use.
c All buttons are not available except the VOL +/- and the
buttons in
this function.
c TV menus differ by manufacturer and model. Refer to the TV's user
manual for further information.
c Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
GRUNDIG, Hisense, RCA
This function may not be compatible with your TV's remote
depending on the remote control's manufacturer.
c To turn off this function, press the
SOUND button for 5 seconds.
"OFF - TV REMOTE" appears on the Soundbar's display.
󰟳
Power
Turns the Soundbar on and off.
󰟴
SOURCE
Press to select a source connected to the Soundbar.
󰟵
󰟴
󰟳
󰟹
󰟺
󰟷
󰟶
󰟸
󰟻
· 15 · English
󰟵
Mute
Sets the volume temporarily to 0.
Press again to cancel.
󰟶
Volume
Adjusts the volume level of the unit.
󰟷
Play / Pause
Press the
&
button to pause a music temporarily.
Press the
&
button again to play the selected music.
Skip Forward
Selects the next file.
Skip Back
Selects the previous file.
Repeat
Press to set the Repeat function during music playback from a USB device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Plays a track repeatedly.
ALL-REPEAT : Plays all tracks repeatedly.
RANDOM-REPEAT : Plays tracks in random order.
󰟸
Surround Sound
The Surround Sound function adds depth and a sense of space to sound.
When this button is pressed, ON or OFF is repeatedly alternated.
󰟹
Bluetooth POWER
Press to turn the Bluetooth POWER On function on and off. When the Bluetooth
POWER On function is on, ON - BLUETOOTH POWER appears in the Soundbar’s
display.
󰟺
SOUND EFFECT
You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE,
SPORTS, MOVIE, and NIGHT.
c NIGHT Mode
When changing a channel or music source, the volume difference between
different music input sources is automatically adjusted to be suitable for
listening.
󰟻
SOUND CONTROL
You can select from TREBLE, BASS, SUBWOOFER LEVEL
or
AUDIO SYNC.
Press to select TREBLE, BASS,
SUBWOOFER LEVEL or AUDIO SYNC.
Then, use the , buttons to adjust the
TREBLE
or
BASS
volume from -6 ~ +6,
SUBWOOFER LEVEL volume from -12, -6 ~ +6.
If the video and audio between the TV and your Soundbar are not
synchronized, select AUDIO SYNC in Sound Settings, and then set audio delay
between 0~300 milliseconds by using the , buttons.
· 16 · English
TROUBLESHOOTING
Before seeking assistance, check the following.
The unit will not turn on.
Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
A function does not work when the button is
pr
essed.
Is there static electricity in the air?
Disconnect the power plug and connect it again.
Sound is not produced.
Is the Mute function on?
Press the (Mute) button to cancel the function.
Is the volume set to minimum?
Adjust the V
olume.
The remote control does not work.
Is the battery drained?
Replace with new battery
.
Is the distance between the remote control and
Soundbar main unit too far?
Move the remote control closer to the Soundbar
main unit.
The TV SoundConnect (TV pairing) failed.
Does your TV support TV SoundConnect?
TV SoundConnect is supported by some
Samsung TVs r
eleased from 2012 on. Check
your TV to see if it supports TV SoundConnect.
Is your TV firmware the latest version?
Update your TV with the latest firmwar
e.
Does an error occur when connecting?
Contact the Samsung Call Centr
e.
Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection,
press and hold the & button for 5 seconds.
The red LED on the subwoofer blinks and the
subwoofer is not producing sound.
This issue can occur if the subwoofer is not
connected to the Soundbar main unit.
T
ry to connect your subwoofer again.
See page 5.
LICENCE
Manufactured under licence from Dolby
Laboratories. Dolby, Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS Licencing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licencing LLC in the United States and other
countries.
T
· 17 · English
OPEN SOURCE LICENCE NOTICE
To send inquiries and requests regarding open sources, contact Samsung via Email ([email protected]).
IMPORTANT NOTE ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
SPECIFICATIONS
GENERAL
USB
5V / 0.5A
Weight
Soundbar Main Unit
2.6 kg
Subwoofer
(PS-WK550 / PS-WK551)
6.8 kg
Dimensions
(W x H x D)
Soundbar Main Unit
1010.5 x 54.0 x 87.5 mm
Subwoofer
(PS-WK550 / PS-WK551)
452.0 x 335.0 x 154.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
AMPLIFIER
Rated Output
Power
Soundbar Main Unit
30W x 6, 6 ohm, THD10%
Subwoofer
(PS-WK550 / PS-WK551)
160W, 3 ohm, THD10%
Supported play formats
LPCM 2ch, Dolby Digital, DTS
DTS 2.0 sound is played in DTS format.
• Nominal specification
Design and specifications are subject to change without prior notice.
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of Soundbar main unit)
· 2 · Tiếng Việt
THÔNG TIN AN TOÀ N
CẢ NH BÁ O AN TOÀ N
ĐỂ GIẢ M NGUY CƠ BỊ ĐIỆ N GIẬ T, KHÔNG THÁ O VỎ (HOẶ C PHÍ A SAU). BÊN TRONG KHÔNG CÓ BỘ PHẬ N
O CÓ THỂ NG ĐƯỢ C VỚ I NGƯỜ I DÙ NG. ĐƯA SẢ N PHẨ M ĐẾ N NHÂN VIÊN BẢ O DƯỠ NG CÓ ĐỦ
CHUYÊN MÔN ĐỂ BẢ O DƯỠ NG.
CHÚ Ý
NGUY CƠ BỊ ĐIỆN GIẬT
KHÔNG MỞ
Biể u tượ ng nà y cho biế t có điệ n á p cao bên
trong. Sẽ rấ t nguy hiể m nế u tiế p xú c dướ i mọ i
nh thứ c vớ i bấ t kỳ bộ phậ n bên trong nà o
củ a sả n phẩ m nà y.
Biể u tượ ng nà y cho biế t nộ i dung quan trọ ng
liên quan đế n vậ n hà nh và bả o trì đã đượ c
cung cấ p kè m theo sả n phẩ m nà y.
Sản phẩm loại 2: Biểu tượng này chỉ ra rằng không yêu cầu kết nối an toàn đến dây nối tiếp
đất.
Điện áp AC: Biểu tượng này chỉ ra rằng điện áp định mức được đánh dấu bằng biểu tượng
này là điện áp AC.
Điện áp DC: Biểu tượng này chỉ ra rằng điện áp định mức được đánh dấu bằng biểu tượng
này là điện áp DC.
Lưu ý , Tham khảo Hướng dẫn sử dụng: Biểu tượng này sẽ hướng dẫn người sử dụng tham
khảo sổ tay Hướng dẫn sử dụng để biết thêm thông tin liên quan đến an toàn.
CẢ NH BÁ O : Để giả m nguy cơ chá y hay bị điệ n giậ t, không để thiế t bị y tiế p xú c vớ i nướ c mưa hoặ c hơi
m.
CHÚ Ý : ĐỂ TRÁ NH BỊ ĐIỆ N GIẬ T, SO KHỚ P ĐẦ U RỘ NG CỦ A GIẮ C CẮ M VÀ O KHE CẮ M RỘ NG, CẮ M
HOÀ N TOÀ N.
Dụ ng cụ y sẽ luôn đượ c kế t nố i vớ i ổ cắ m AC bằ ng kế t nố i tiế p đấ t.
Để ngắ t kế t nố i dụ ng cụ khỏ i điệ n lướ i, phí ch cắ m phả i đượ c ké o ra khỏ i ổ cắ m điệ n lướ i, do đó giắ c cắ m
điệ n lướ i sẽ sẵ n sà ng hoạ t độ ng.
CHÚ Ý
Không để nướ c bắ n và o hoặ c nhỏ o thiế t bị . Không đặ t cá c vậ t thể chứ a chấ t lỏ ng, chẳ ng hạ n như bì nh
lên trên thiế t bị .
Để tắ t thiế t bị y hoà n toà n, bạ n phả i ké o phí ch cắ m nguồ n ra khỏ i ổ cắ m trên tườ ng. Do đó , phả i luôn dễ
ng tiế p cậ n đượ c phí ch cắ m nguồ n.
· 3 · Tiếng Việt
PHÒNG NGỪ A
1. Đả m bả o rằ ng nguồ n cấ p điệ n AC trong nhà bạ n tuân theo nhã n nhậ n dạ ng đượ c dá n ở phí a sau củ a sả n
phẩ m. Lắ p đặ t sả n phẩ m củ a bạ n theo chiề u ngang, trên mộ t đế thí ch hợ p (vậ t đỡ ), vớ i khoả ng không gian
xung quanh đủ thông thoá ng 7~10 cm. Đả m bả o rằ ng khe thông gió không bị bị t. Không đặ t thiế t bị trên bộ
khuế ch đạ i hoặ c thiế t bị khá c có thể bị ng. Thiế t bị y đượ c thiế t kế cho mụ c đí ch sử dụ ng liên tụ c. Để
tắ t thiế t bị hoà n toà n, rú t phí ch cắ m AC khỏ i ổ cắ m trên tườ ng. Rú t phí ch cắ m thiế t bị nế u bạ n đị nh không
sử dụ ng thiế t bị trong mộ t thờ i gian dà i.
2. Khi giông bã o, ngắ t kế t nố i phí ch cắ m điệ n lướ i AC khỏ i ổ cắ m trên tườ ng. Điệ n á p cự c đạ i là do sé t có thể
m hỏ ng thiế t bị .
3. Không phơi thiế t bị trự c tiế p dướ i á nh nắ ng mặ t trờ i hoặ c cá c nguồ n nhiệ t khá c. Việ c nà y có thể dẫ n đế n
quá nhiệ t và hư hỏ ng thiế t bị .
4. Bả o vệ sả n phẩ m khỏ i nhữ ng nơi ẩ m thấ p (ví dụ : bì nh hoa) và nhữ ng nơi quá ng (ví dụ : lò sưở i) hoặ c thiế t
bị tạ o từ nh hoặ c điệ n trườ ng mạ nh. Ngắ t kế t nố i dây nguồ n điệ n khỏ i nguồ n cung cấ p AC nế u thiế t bị bị
hư hỏ ng. Sả n phẩ m củ a bạ n không dà nh cho mụ c đí ch sử dụ ng công nghiệ p. Việ c sử dụ ng sả n phẩ m nà y
chỉ nh cho mụ c đí ch sử dụ ng cá nhân. Ngưng tụ thể xả y ra nế u sả n phẩ m hoặ c đĩ a củ a bạ n đượ c cấ t
giữ nhiệ t độ lạ nh. Nế u vậ n chuyể n thiế t bị trong mù a đông, đợ i khoả ng 2 giờ cho đế n khi thiế t bị đạ t nhiệ t
độ phò ng rồ i sử dụ ng.
5. Pin đượ c sử dụ ng cù ng vớ i sả n phẩ m nà y chứ a cá c chấ t hoá họ c có hạ i cho môi trườ ng.́ Không vứ t bỏ
pin cù ng rá c sinh hoạ t chung. Không ném pin vào lửa. Không ngắt mạch, tháo rời hoặc để pin quá nóng.
Thay pin không đúng cách có thể gây cháy nổ. Chỉ được thay cùng loại pin hoặc tương đương.
CẢ NH BÁ O, KHÔNG NUỐ T PIN, NGUY HIỂ M BỎ NG HÓ A CHẤ T,
[Điề u khiể n từ xa đượ c cung cấ p kè m theo] Sả n phẩ m nà y chứ a pin đồ ng xu/cú c á o.
Khi nuố t phả i, pin đồ ng xu/cú c á o có thể gây ra bỏ ng nghiêm trọ ng bên trong cơ thể sau chưa đầ y 2 giờ thể
dẫ n tớ i tử vong. Để pin mớ i và pin đã qua sử dụ ng cá ch xa trẻ em. Nế u ngăn đặ t pin không đó ng mộ t cá ch an toà n,
y ngừ ng sử dụ ng sả n phẩ m và xa trẻ em. Nế u bạ n cho rằ ng có thể bạ n đã nuố t phả i pin hoặ c đã để pin lọ t và o bấ t
kỳ bộ phậ n nà o trên cơ thể , hã y tì m kiế m trợ giú p y tế ngay lậ p tứ c.
· 4 · Tiếng Việt
KIỂM TRA LINH KIỆN
Cạnh phải của Soundbar
Thiết bị Chính Soundbar
Trên
2 Bộ chuyển đổi
AC/DC
3 Dây nguồn
Loa trầ m phụ
1 Dây nguồn
Điề u khiể n từ xa/Pin
Cáp Quang
Cáp chuyển đổi
Micro USB thành USB
c Cáp HDMI được bán riêng. Để mua hàng, hãy liên hệ với Trung tâm Dịch vụ Samsung hoặc Bộ phận Chăm
sóc Khách hàng Samsung.
KẾT NỐI NGUỒN ĐIỆN
Dùng các linh kiện nguồn điện (1, 2, 3) để kết nối nguồn điện theo thứ tự sau:
Loa trầ m phụ Thiết bị Chính Soundbar
c Đố i vớ i nguồ n điệ n và Công suấ t Tiêu thụ , hã y tham khả o nhã n đí nh kè m vớ i sả n phẩ m.
(Nhã n : Đáy của Thiết bị Chính Soundbar)
POWER
POWER
Kết nối nguồn
điện
D
MI IN
I OUT
-
ARC)
DC 24V
DC 24V
2 Bộ chuyển đổi AC/DC
DC 24V (Giắc nguồn)
3 Dây nguồn
Đáy của Thiết bị Chính SoundbarMặt sau của Loa trầm
1 Dây nguồn
c Đảm bảo đặt Bộ chuyển đổi AC/DC trên bàn hoặc sàn ở tư thế nằm. Nếu bạn đặt Bộ chuyển đổi AC/DC ở
tư thế thẳng đứng với đầu vào dây AC hướng lên trên, nước hoặc các vật chất lạ có thể thấm vào Bộ
chuyển đổi và khiến Bộ chuyển đổi gặp trục trặc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

Samsung HW-K550 Stručná príručka spustenia

Kategória
Plazmové televízory
Typ
Stručná príručka spustenia
Táto príručka je tiež vhodná pre