Samsung DVD-R135 Používateľská príručka

Kategória
DVD prehrávače
Typ
Používateľská príručka
Instruction Manual
www.samsung.com
AK68-01085M-00
DVD-R135
DVD-R136
English Magyar
âesky Slovenãina
01085M-R135,136-XEH-ENG-Cover 4/5/06 6:07 PM Page 1
IMPORTANT NOTE
The mains lead on this equipment is supplied with a
moulded plug incorporating a fuse. The value of the
fuse is indicated on the pin face of the plug. If it requires
replacing, a fuse approved to BS1362 of the same
rating must be used.
Never use the plug with the fuse cover omitted if the cover
is detachable. If a replacement fuse cover is
required, it must be of the same colour as the pin face of
the plug. Replacement covers are available from your
dealer.
If the fitted plug is not suitable for the power points in your
house or the cable is not long enough to reach a
power point, you should obtain a suitable safety approved
extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug,
remove the fuse and then safely dispose of the
plug. Do not connect the plug to a mains jack, as there is a
risk of shock hazard from the bared flexible cord.
To disconnect the apparatus from the mains, the plug must
be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
The product unit accompanying this user manual is
licensed under certain intellectual property rights of certain
third parties. This license is limited to private non-
commercial use by end-user consumers for licensed
contents.
No rights are granted for commercial use.
The license does not cover any product unit other than this
product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/IEC
11172-3 or ISO/IEC 13818-3 used or sold in combination
with this product unit. The license only covers the use of
this product unit to encode and/or decode audio files
conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
No rights are granted under this license for product features
or functions that do not conform to the ISO/IEC 11172-3 or
ISO/IEC 13818-3.
Warning
2
- English
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous
voltage” inside the product that presents
a risk of electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
Do not install this equipment in a confined space
such as a bookcase or similar unit.
WARNING : To prevent damage which may result in
fire or electric shock hazard, do not
expose this appliance to rain or
moisture.
CAUTION : DVD RECORDER USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED.
BE SURE TO OPERATE RECORDER
CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
This product satisfies CE regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances, such as radios
and televisions, use shielded cables and connectors
for connections.
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 2
English -
3
Important Safety Instructions
Read these operating instructions carefully before using
the DVD Recorder. Follow all the safety instructions
listed below. Keep these operating instructions handy
for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A grounding-
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. if the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Handling Cautions
Before connecting other components to this DVD
Recorder, be sure to turn them all off.
Do not move the DVD Recorder while a disc is being
played, or the disc may be scratched or broken, the
DVD Recorder's internal parts may be damaged.
Do not put a flower vase filled with water or any small
metal objects on the DVD Recorder.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc
tray.
Precaution
Exterior interference such as lightning and static
electricity can affect normal operation of this DVD
Recorder. If this occurs, turn the DVD Recorder off
and on again with the STANDBY/ON button, or
disconnect and then reconnect the AC power cord to
the AC power outlet.
The DVD Recorder will operate normally.
Be sure to remove the disc and turn off the DVD
Recorder after use.
Disconnect the AC power cord from the AC outlet
when you don’t intend to use the DVD Recorder for
long periods of time.
Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power
cord from the AC outlet.
Do not use benzene, thinner, or other solvents for
cleaning.
Wipe the cabinet with a soft cloth.
Disc Handling
Use discs with regular
shapes. If an irregular disc
(a disc with a special shape) is used, this DVD
recorder may be damaged.
Holding discs
Avoid touching the surface of a
disc where recording is performed.
DVD-RW, DVD-R
Clean with an optional DVD-
RAM/PD disc cleaner (LF-
K200DCA1 where available).
Do not use cleaners or cloths
for CDs to clean DVD-RW/
DVD-R discs.
DVD-Video, Audio CD
Wipe off dirt or contamination on the disc with a soft
cloth.
Cautions on handling discs
Do not write on the printed side with a ball-point pen
or pencil.
Do not use record cleaning sprays or antistatic.
Also, do not use volatile chemicals, such as benzene
or thinner.
Do not apply labels or stickers to discs. (Do not use
discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers available
on the market.
Do not load warped or cracked discs.
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 3
Use a 700MB(80 minutes) CD-R/-RW disc. If
possible, do not use a 800MB(90 minutes) or above
disc, as the disc may not play back.
If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded files may not play.
Some CD-R/-RW discs may not be playable with this
DVD Recorder, depending on the device which was
used to burn them. For contents recorded on CD-R/-
RW media from CDs for your personal use, playability
may vary depending on contents and discs.
Disc : CD-R/-RW, DVD-R/-RW
MPEG4 File with following extensions can be played.
: .avi, .divx, .AVI, .DIVX
MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x
DivX-Pro Xvid
Motion Compensation : QPEL, GMC
four CC : MPG4, mpg4, DIV3, divX3, DIVX, divX,
DX50, MP43, mp43, XVID, xvid
Available Audio Format : “MP3”, “MPEG1 Audio Layer2”,
“LPCM”, “AC3”, “DTS”, “MS ADPCM”
Supported subtitle file formats: .smi, .srt, .sub, .psb, .txt, .ass
DVD-R Disc Playback and Recording
Once a DVD-R recorded in Video Mode is finalised, it
becomes DVD-Video.
You can record onto the available space on the disc
and perform editing functions such as giving titles to
discs and programmes and erasing programmes
before finalising.
When programming is erased from a DVD-R, that
space does not become available. Once an area on
a DVD-R is recorded on, that area is no longer
available for recording, whether the recording is
erased or not.
It takes about 30 seconds for the DVD Recorder to
complete recording management information after
recording finishes.
This DVD Recorder optimizes the DVD-R for each
recording. Optimizing is carried out when you start
recording after inserting the disc or turning on the
DVD Recorder. Recording onto the disc may become
impossible if optimizing is carried out too many times.
Playback may be impossible in some cases due to
the condition of recording.
This DVD Recorder can play back DVD-R discs
recorded and finalised with a Samsung DVD video
recorder. It may not be able to play some DVD-R
discs depending on the disc and the condition of the
recording.
DVD-RW Disc Playback and Recording
Recording and playback can be performed on DVD-
RW discs in both the Video and VR Modes.
Once a DVD-RW recorded in both the Video and VR
Modes is finalised, you cannot perform addtional
recording.
Once a DVD-RW recorded in Video Mode is finalised,
it becomes DVD-Video.
In both modes, playback can be performed before
and after finalisation, but additional recording,
deleting and editing can not be performed after
finalisation.
4
- English
Disc Storage
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
Keep in a clean protection jacket.
If you move your DVD recorder suddenly from a cold
place to a warm place, condensation may generate
on the operating parts and lens and cause abnormal
disc playback. If this occurs, do not connect the plug
to the power outlet and wait for two hours. Then
insert the disc and try to play back again.
Disc Specifications
DVD-Video
A digital versatile disc (DVD) can contain up to
135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2
picture compression and Dolby digital surrounding,
allowing you to enjoy vivid and clear theatre quality
images in the comfort of your own home.
When switching from the first layer to the second
layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound.
This is not a malfunction of the DVD Recorder.
Once a DVD-R/-RW recorded in Video Mode is
finalised, it becomes DVD-Video.
Audio CD
An audio disc on which 44.1kHz PCM Audio is
recorded
Plays CD-DA format audio CD-R and CD-RW discs.
The DVD Recorder may not be able to play some
CD-R or CD-RW discs due to the condition of the
recording.
CD-R/-RW
Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
Only MP3 files with the ".mp3", ".MP3" extension can
be used.
For MP3 files recorded with a VBR(Variable Bit
Rates), from 32 Kbps to 320 Kbps, the sound may
cut in out.
Playable bitrate range is from 56Kbps to 320Kbps.
This DVD Recorder can handle a maximum of 500
files and 100 folders.
Only JPEG files with the ".jpg", ".JPG" extension can
be used.
This DVD Recorder can handle a maximum of 500
files and 100 folders.
Maximum size of progressive JPEG is 3M pixels.
MOTION JPEG is not supported.
MP3 CD-R/-RW
JPEG CD-R/-RW
Using CD-R/-RW
Using MPEG4 disc
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 4
English -
5
If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format.
Be careful when executing Format because all the
recorded data may be lost.
A DVD-RW blank disc is initialized to VR Mode when
first initialized.
DVD-RW (VR mode)
- This is a format that is used for recording data on a
DVD-RW disc. You can record multiple titles, edit,
delete, partial delete, create a playlist, etc.
- A disc that is recorded in this mode may not be
played by existing DVD Recorder.
DVD-RW (Video mode)
- This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played
by existing DVD Recorder once it has been
finalised.
- If a disc that has been recorded in Video Mode by a
different maker’s recorder but has not been
finalised, it cannot be played or additionally be
recorded by this DVD Recorder.
Protection
This DVD Recorder can allow you to protect the
contents of your discs, as described below.
Programme-protected: See page 71
“Locking(Protecting) a Title”
Disc-protected: See page 83 “Disc Protection”
DVD-RW/DVD-R discs that are incompatible with the
DVD-VIDEO format cannot be played with this DVD
Recorder.
For more information on DVD recording compatibility,
consult your DVD-RW/DVD-R manufacturer.
Use of poor quality DVD-RW/DVD-R discs may
cause following unexpected problems including,
without limitation, recording failure, loss of recorded
or edited materials or damage to the DVD Recorder.
Do not use the following discs!
LD, CD-G, CD-I, Video-CD, CD-ROM and DVD-ROM
discs should not be used in this DVD Recorder.
[Note]
Disc types that can be played : CD/CD-R/CD-RW/
MP3/JPEG/MPEG4/DVD-Video/DVD-RW/DVD-R.
For a DVD-R/DVD-RW disc, which has been
recorded in Video Mode on another component, it
can play only when finalised.
Some commercial discs and DVD discs purchased
outside your region may not be playable with this DVD
Recorder. When these discs are played, either “No Disc”
or "The disc cannot be played. Please check the
regional code of the disc." will be displayed.
If your DVD-RW disc is an illegal copy or is not in
DVD video format, it may also not be playable.
High Speed Recording discs can be used in this DVD
Recorder.
Not all brands of discs will be compatible with this
DVD Recorder.
COPY PROTECTION
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
recorder directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This DVD Recorder incorporates copyright
protection technology that is protected by methods
claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorised by
Macrovision Corporation, is intended for home and
other limited viewing uses only unless otherwise
authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Getting Started
Disc Compatibility
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 5
6
- English
Getting Started
Getting Started
Warning........................................................................2
Precaution...................................................................3
Important Safety Instructions.............................................3
Handling Cautions..............................................................3
Maintenance of Cabinet.....................................................3
Disc Handling .....................................................................3
Disc Storage .......................................................................4
Disc Specifications .............................................................4
General Features........................................................8
Before reading the users manual...........................9
How to use the DVD Recorder.................................9
Unpacking .................................................................11
Accessories.......................................................................11
Preparing the Remote Control.........................................11
Setting the Remote Control .............................................11
Description................................................................13
Front Panel(DVD-R135) .................................................13
Front Panel(DVD-R136) .................................................13
Front Panel Display .........................................................14
Rear Panel........................................................................14
Tour of the Remote Control .............................................15
Connecting & Setting Up
Connecting & Setting Up
Quick Overview........................................................16
Connecting the DVD Recorder..............................17
Additional connections...........................................17
Antenna + DVD Recorder +
external decoder box + TV ....................................18
Other type of connecting
the Video output cable............................................18
Case 1 : Connecting to a Video (Composite)
output jack ........................................................19
Case 2 : Connecting to an S-Video output jack.............19
Case 3 : Component Video output jacks........................20
Other type of connecting the Audio output cable..
20
Case 1 : Connecting to your TV......................................20
Case 2 : Connecting to a stereo amplifier with AV
output jacks .....................................................21
Case 3: Connecting to an AV amplifier with a digital
output jack ........................................................21
Connecting HDMI/DVI to a TV ...............................22
Case 1 : Connecting to a TV with HDMI Jack ...............22
Case 2 : Connecting to a TV with DVI Jack ..................22
Connecting to AV3 IN, DV input jack....................23
Case 1 : Connecting a VCR, Set-Top Box(STB), DVD
player or Camcorder to the AV3 IN jacks ......23
Case 2 :
Connecting a Camcorder to the DV IN jack
.....23
System Setup
System Setup
On-Screen Menu Navigation..................................24
Plug & Auto Setup...................................................25
Setting the Clock......................................................26
Presetting Channels with the Auto Setup
function......................................................................27
Presetting Channels with the Manual Setup
function......................................................................28
Setting up the Language Options.........................29
EP Mode Time Setting ............................................30
Automatic Chapter Creation..................................31
Quick Recording Setting ........................................32
Setting up the Audio Options................................32
Audio Options...................................................................33
Setting up Video Output Options..........................34
Setting up the Progressive scan...........................35
Canceling the Progressive scan...........................35
Setting up the Display(Video) Options.................36
Display(Video) Options ....................................................36
Output selection ...............................................................37
Contents
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 6
English -
7
Using the Repeat Function..............................................54
Selecting the Subtitle .......................................................56
Selecting the Audio language..........................................56
Changing the Camera Angle...........................................57
Zooming-In........................................................................57
Using Bookmarks.............................................................58
Using Markers ..................................................................59
Playing an Audio CD/MP3 .....................................60
Playing an Audio CD (CD-DA)/MP3 ...............................60
Playing a Picture......................................................64
Playing a MPEG4 .....................................................65
Playing the Title List................................................66
Editing
Editing
Basic Editing (Title List)...................................................70
Renaming(Labeling) a Title..............................................70
Locking(Protecting) a Title ...............................................71
Deleting a Title..................................................................71
Deleting a Section of a Title.............................................72
Advanced Editing (Playlist) .............................................
74
Creating a Playlist ............................................................74
Playing Entries in the Playlist ..........................................75
Renaming a Playlist Entry ...............................................76
Editing a Scene for the Playlist .......................................77
Copying a Playlist Entry to the Playlist ...........................80
Deleting a Playlist Entry from the Playlist.......................81
Disc Manager
..............................................................82
Editing the Disc Name .....................................................82
Disc Protection .................................................................83
Formatting a Disc.............................................................83
Delete All Title Lists ..........................................................84
Finalising a disc................................................................85
Unfinalising a disc (V/VR mode) .....................................86
Additional Information
Additional Information
Troubleshooting.......................................................87
Specifications...........................................................91
DivX(R) Registration................................................37
Setting up the Parental Control.............................37
If you forgot your password.............................................38
About the Rating Level ....................................................38
About the Change Password ..........................................39
Recording
Recording
Before Recording.....................................................40
Recordable discs..............................................................40
Recording Formats ..........................................................41
Recording Mode...............................................................41
Unrecordable video..........................................................41
About INFO Button...........................................................42
Checking the available disc space (Disc Information)...42
Recording the current TV programme you are
watching....................................................................42
Recording from external equipment you are
watching....................................................................44
Copying from a Camcorder ...................................44
Making a One Touch Recording (OTR)................45
Making a Timer Recording.....................................46
Flexible Recording (for Timer recording only) ...47
Editing the Scheduled Record List.......................48
Deleting the Scheduled Record List.....................48
Recording the Standard Timer List ......................49
Playback
Playback
Before Playing..........................................................50
Region code (DVD-Video only).......................................50
Disc types that can be played .........................................50
Discs that cannot be played ............................................50
Playing a Disc...........................................................51
Using the Disc Menu & Title Menu .................................52
Using the Search Functions ............................................52
Slow Motion Play..............................................................53
Step Motion Play..............................................................53
About ANYKEY ................................................................53
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 7
8
- English
General Features
High quality progressive scan
Progressive scanning provides high resolution and
flicker free video. The 10-bit 54-MHz DAC and 2D Y/C
Separating Circuitry provides the highest image
playback and recording quality. (See pages 20, 35)
A variety of functions with an easy-to-use user
interface
The integrated menu system and the messaging
function allow you to perform desired operations both
easily and conveniently. With a DVD-RW disc, you can
edit recorded video, create a playlist, edit video in a
specific sequence according to your requirements.
MPEG4 playback
This DVD Recorder can play MPEG4 formats within an
avi file.
DivX Certification
DivX, DivX Certified, and associated
logos are trademarks of DivXNetworks,
Inc and are used under licence.
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital
video/audio signal path from the DVD recorder to your
TV.
The DVD Recorder allows you to record and play high
quality digital video on DVD-RW/DVD-R discs. You can
record and edit digital images on DVD-RW/DVD-R
discs as if they were VCR tapes.
High quality digital audio and video recording
and playback
Record up to 8-hours of images with a 4.7 GB
DVD-RW/DVD-R disc, depending on the recording
mode.
Selectable Recording Mode
You can set your recorder to one of four different
recording speeds, each varying in recording quality and
length. EP (6Hr or 8Hr) mode yields the most recording
time, LP & SP modes provide less recording time with
higher quality recording, XP mode gives you the highest
quality recording.
Automated Quality Adjustment for Timer
Recording
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time
can be recorded onto the free disc space.
(See page 47.)
Creating a DVD video title using
DVD-RW/DVD-R disc
With the DVD Recorder, you can create your own DVD
Video titles on 4.7 GB DVD-RW/DVD-R discs.
Copying data from a digital camcorder using a
DV input jack
Record DV Device video onto DVD-RW, DVD-R discs
using the DV input jack (IEEE 1394-4pin/4pin).
(See pages 44-45.)
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 8
English -
9
1) Be sure to be familiar with Safety Instructions before
using this DVD Recorder. (See pages 2-5)
2) If a problem occurs, check for Troubleshooting.
(See pages 87-90.)
About the use of this users manual
©2006 Samsung Electronics Co.
All rights reserved; No part or whole of this users
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
Copyright
How to use the DVD
Recorder
Step 1
Select the disc type
This DVD Recorder can record on the following types
of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Before reading the users
manual
Make sure to check the following terms before
reading the users manual.
Step 2
Format the disc to start recording
Unlike a VCR, the DVD Recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation of recording on a disc.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode). For an unused disc, a message that asks
whether to format in VR Mode or not is displayed.
You can play a Video mode disc on various DVD
components. A VR mode disc allows more varied
editing.
Using a DVD-R
Formatting a disc is unnecessary and only Video
Mode Recording is supported. You can play this type
of discs on various DVD components only when they
have been finalised.
You can only use either the VR or
Video mode on a DVD-RW, but not
both at the same time.
You can change the DVD-RW
format to another format by
reinitializing. It should be noted that
the disc's data will be lost when
changing formats.
NOTE
Getting Started
Icons that will be used in manual
Icon Term Definition
This involves a function available
DVD
in DVD or DVD-R/DVD-RW
discs that have been recorded
and finalised in Video Mode.
This involves a function available
RW
in DVD-RW.
This involves a function available
R
in DVD-R.
CD
This involves a function available
in a data CD (CD-R or CD-RW).
This involves a function available
JPEG in a data picture CD-R/-RW,
DVD-R/-RW.
This involves a function available
MP3
in a data CD-R/-RW,DVD-R/-RW.
This involves a function available
MPEG4
in a data CD-R/-RW,DVD-R/-RW.
This involves a case where a
Caution function does not operate or
settings may be cancelled.
This involves tips or instructions
NOTE on the page that help each
function operate.
One-Touch
A function that can be operated
button by using only one button.
ANYKEY A function that can be operated
button by using ANYKEY button.
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 9
10
- English
Step 3
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once, Daily, MO-SA, MO-FR,
W-SA, etc.
Recording mode : XP (high quality mode), SP (standard
quality mode), LP (long recording mode), and EP
(extended mode) according to the recording mode. When
recording is set in the FR mode, the best quality picture is
recorded with regards to the remaining time on the disc.
Step 4
Playing
You can select the title you want to play in a displayed
menu and then immediately start playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two points
where you start and stop recording. Chapters will be
created automatically when you finalise recording on
DVD-R / DVD-RW discs in Video mode.
The chapters length (interval between chapters) varies
according to the recording mode.
Step 6
Finalising & Playing on other DVD components
To play your DVD on other DVD components,
finalising may be necessary. First, finish all editing and
recording operations, then finalise the disc.
When using a DVD-RW disc in VR Mode
Although finalising is generally unnecessary when
playing the disc on a VR Mode compatible component,
a finalised disc should be used for playback.
When using a DVD-RW disc in Video Mode
The disc should be finalised first to enable playback on
anything other than this DVD Recorder. No more
editing or recording can be made on the disc once it
has been finalised.
When using a DVD-R disc
You should finalise the disc to play it on a component
other than this DVD Recorder. You cannot edit or
record on the disc once it has been finalised.
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The DVD Recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RW in VR mode)
With this DVD Recorder, you can create a new playlist
on the same disc and edit it without the change of the
original recording.
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 10
English -
11
Unpacking
Getting Started
Accessories
Check for the supplied accessories below.
Preparing the Remote Control
Install Batteries in the Remote Control
Open the battery cover on the back of the remote
control.
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
Replace the battery cover.
If the remote does not operate properly:
Check the polarity +/- of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local
environmental regulations. Do not put them in the
household trash.
Setting the Remote Control
You can control certain functions of another
manufacturers TV with this remote control.
Control function buttons involve:
STANDBY/ON,
PROG
/
, VOL +/-, Direct Number buttons,
TV MUTE, INPUT SEL. button.
Video/Audio Cable
RF Cable for TV
Instruction Manual
Batteries for Remote
Control (AAA Size)
Quick Guide
HDMI Cable
Remote Control
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 11
12
- English
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the STANDBY/ON button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate number
buttons.
Controllable TV Codes
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
Then you can control the television using the
following buttons after the TV button.
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
If you replace the remote control's
batteries, you must set the brand code
again.
NOTE
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
NOTE
Button Function
STANDBY/ON Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL (+ or -) Used to adjust the volume of the television.
PROG ( or ) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
0~9 Used to input number directly.
BRAND BUTTON
SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09
AIWA 82
ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18
BANG & OLUFSEN 57
BLAUPUNKT 71
BRANDT 73
BRIONVEGA 57
CGE 52
CONTINENTAL EDISON 75
DAEWOO
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
EMERSON 64
FERGUSON 73
FINLUX 06, 49, 57
FORMENTI 57
FUJITSU 84
GRADIENTE 70
GRUNDIG 49, 52, 71
HITACHI 60, 72, 73, 75
IMPERIAL 52
JVC 61, 79
LG 06, 19, 20, 21, 22, 78
LOEWE 06, 69
LOEWE OPTA 06, 57
MAGNAVOX 40
METZ 57
MITSUBISHI 06, 48, 62, 65
MIVAR 52, 77
NEC 83
NEWSAN 68
NOBLEX 66
NOKIA 74
NORDMENDE 72, 73, 75
PANASONIC 53, 54, 74, 75
PHILIPS 06, 55, 56, 57
PHONOLA 06, 56, 57
PIONEER 58, 59, 73, 74
RADIOLA 06, 56
RADIOMARELLI 57
RCA 45, 46
REX 74
SABA 57, 72, 73, 74, 75
SALORA 74
SANYO 41, 42, 43, 44, 48
SCHNEIDER 06
BRAND BUTTON
SELECO 74
SHARP 36, 37, 38, 39, 48
SIEMENS 71
SINGER 57
SINUDYNE 57
SONY 35, 48
TELEAVA 73
TELEFUNKEN 67, 73, 75, 76
THOMSON 72, 73, 75
THOMSON ASIA 80, 81
TOSHIBA 47, 48, 49, 50, 51, 52
WEGA 57
YOKO 06
ZENITH 63
Getting Started
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 12
English -
13
Description
Getting Started
Front Panel (DVD-R135)
1. STANDBY/ON
Turns the DVD Recorder on and off.
2. AV3 IN
Connect external equipment.
3. DV-IN
Connects extermal digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. P.SCAN
Selects the progressive scan mode.
6. OPEN/CLOSE
Opens and closes the disc tray.
7. DISPLAY
Displays the playing status, title/chapter/time, etc.
8. PROG ( )
Select TV preset Channels.
Same as PROG button on the remote control.
9. REC
Starts recording.
10.STOP
Stops disc playback.
11. PLAY/PAUSE
Plays a disc or pauses playback/recording.
12.SEARCH/SKIP
Go to the next title/chapter/track or go back to the
previous title/chapter/track.
Front Panel (DVD-R136)
1. STANDBY/ON
Turns the DVD Recorder on and off.
2. AV3 IN
Connect external equipment.
3. DV-IN
Connects extermal digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. OPEN/CLOSE
Opens and closes the disc tray.
6. DISPLAY
Displays the playing status, title/chapter/time, etc.
7. SEARCH/SKIP
Go to the next title/chapter/track or go back to the
previous title/chapter/track.
8. PLAY/PAUSE
Plays a disc or pauses playback/recording.
9. P.SCAN
Selects the progressive scan mode.
10.PROG ( )
Select TV preset Channels.
Same as PROG button on the remote control.
11. REC
Starts recording.
12.STOP
Stops disc playback.
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 13
14
- English
Getting Started
Front Panel Display
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record mode.
4. Lights when a DVD-R/-RW disc is loaded.
5. Playing time/clock/current status indicator.
6. Lights in the progressive scan mode.
1. In from aerial connector
2. Out to TV connector
3. AV2(EXT) INPUT SCART Connector
4. AV1(TV) OUTPUT SCART Connector
5. HDMI OUT
Connects the input of external equipment using a
HDMI-HDMI cable or HDMI-DVI cable.
6. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
7. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
8. AUDIO OUT
Connects to the audio input of external equipment
using audio cables.
9. VIDEO OUT
Connects the input of external equipment using a
Video cable.
10. S-VIDEO OUT
Connects the input of external equipment using an
S-Video cable.
11. COMPONENT VIDEO OUT
Connects to equipment having Component video
output.
Rear Panel
The Antenna connection does not pass
output signal of DVD. To watch a DVD on
your TV, you must connect audio/video
cables.
NOTE
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 14
English -
15
Getting Started
Tour of the Remote Control
1. STANDBY/ON Button
2. 0~9(Number) Buttons
3. TV/DVD Button
4. Reverse/Forward Skip Buttons
Press to skip a disc backwards or forwards.
5. Reverse/Forward Step Buttons
Press to play frame by frame.
6. Reverse/Forward Search Buttons
Press to search a disc backwards or forwards.
7. STOP Button
Press to stop a disc.
8. VOL Buttons
Volume adjustments.
9. AUDIO/TV MUTE Button
Use this to access various audio functions on a
disc.(DVD mode)
This operates as Sound Mute. (TV mode)
10. MENU Button
Brings up the DVD recorders setup menu.
11. OK/DIRECTION(
¥
) Buttons
12. TITLE LIST/DISC MENU Button
Use this to enter the View Recording list/Disc menu.
13. ANYKEY Button
Use this to view the status of the disc that is being
played.
14. REC Button
Use to make a recording on DVD-RW/-R discs.
15. REC MODE Button
This will display the recording status.(XP/SP/LP/EP)
16. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
17. OPEN/CLOSE Button
To open and close the disc tray.
18. SUBTITLE Button
Press this to switch the DVD’s subtitle language.
19. PLAY/PAUSE Button
Press to play a disc or pause playback/recording.
20. PROG Buttons
Select preset channels in a specific order.
Same as PROG buttons in front panel.
21. RETURN Button
Returns to a previous menu.
22. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded files list.
23. CANCEL Button
24. MARKER/TIMER Button
Use this to bookmark a position while playing a
disc.
Press to directly enter the Timer Recording Mode
menu while stopping a disc.
25. INFO Button
This will display current settings or disc status.
26. TV Button
Press this to operate TV.
27. DVD Button
Press this when you use a DVD recorder.
28. INPUT SEL. Button
Select line input signal in external input mode
(PROG, AV input or DV INPUT)
29. ZOOM Button
Press this to enlarge the screen.
4
3
6
10
12
11
7
5
9
13
15
14
8
1
16
26
28
18
2
17
27
29
19
20
21
23
22
24
25
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 15
16
- English
A Quick Overview presented in this guide will give you
enough information to start using the DVD Recorder.
Connecting
& Setting Up
Quick Overview
Quick Overview.................................................16
Connecting the DVD Recorder........................17
Additional connections .....................................17
Antenna + DVD Recorder
+ external decoder box + TV ..........................18
Other type of connecting
the Video output cable......................................18
Other type of connecting
the Audio output cable......................................20
Connecting HDMI/DVI to a TV ........................22
Connecting to AV3 IN, DV input jack...............23
This section involves various methods of
connecting the DVD Recorder to other external
components and required initial setting modes.
Connecting the DVD Recoder
Additional connections
Other type of connecting the
Video output cable
Other type of connecting the Audio
output cable
Connecting to AV3 IN, DV input jack
Antenna + DVD Recorder + external
decoder box + TV
Connecting & Setting Up
Connecting HDMI/DVI to a TV
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 16
English -
17
Connecting & Setting Up
Connecting the DVD
Recorder
Additional connections
You can connect your DVD Recorder to a satellite or
digital tuner.
- DVD mode
1. Connect the AV2 connector of DVD Recorder and
VCR/Satellite receiver or digital tuner using a SCART
cable.
2. Connect the AV1 connector to the SCART AV
connector on TV.
3. Turn on the DVD Recorder, VCR/Satellite receiver or
digital tuner and TV.
4. Set Input mode on AV2.
- TV mode
1. Press the TV/DVD button on remote control,then
“TV” appear on Front LED display. (or turn off DVD
Recorder.)
2. You can watch programmes from a satellite or digital
tuner connected to this DVD Recorder, even when
the DVD Recorder is turned off.
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the DVD Recorder and TV
5.Turn on the DVD Recorder and TV.
6. Press the INPUT SEL. button on your TV remote
control until the Video signal from the DVD Recorder
appears on the TV screen.
The RF cable connection of this DVD
Recorder sends only signals of TV.
You must connect SCART cable or
Audio/Video cables to watch a signal from
your DVD Recorder.
TV mode
Press the TV/DVD button on remote
control, then “TV” appear on Front LED
display (or turn off DVD Recorder).
NOTE
To RF IN
external device
(VCR/Satellite receiver)
To RF OUT
RF Cable
To ANT INPUT
01085M-R135,136-XEH-ENG_02~17 4/5/06 6:08 PM Page 17
Connecting & Setting Up
There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.
Case 1 : Connecting to a Video (Composite) output
jack
Case 2 : Connecting to an S-Video output jack
Case 3 : Component Video output jacks
S-Video, Component video and Progressive
Output Modes
S-Video and Component video output are available
only if your TV supports S-Video input or Component
video input, respectively. If S-Video or Component
video output does not work, check the TV
connections and the TV input selection settings.
Compared to standard interlaced video, progressive
scan doubles the amount of video lines fed to your
TV, resulting in a more stable, flicker-free, clear
image than interlaced video.
This is only available with TVs that support
progressive scan.
Progressive Scan Output (576p)
Consumers should note that not all high definition
television sets are fully compatible with this DVD
Recorder and may cause artifacts to be displayed in
the picture, in case of 576 progressive scan picture
problems, It is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding our TV set compatibility with
this model 576p DVD Recorder, please contact our
customer service centre.
Other type of connecting
the Video output cable
Antenna + DVD Recorder +
external decoder box + TV
If you connect external decoder box to DVD recorder,
you can record scrambled channels (CANAL+or
Premiere broadcasts) received through the built-in TV
tuner in DVD Recorder.
1. Connect RF antenna cables as shown.
2. Connect the AV1 connector on this recorder to the
SCART AV connector on TV using a SCART cable.
3. Connect the AV2 connector to a SCART AV
connector on decoder box.
4. To watch or record PAY-TV Canal Plus programmes,
set your DVD Recorder to receive the channels using
the on-screen display.(Refer to page 28)
DECODER
Wall
18
- English
01085M-R135,136-XEH-ENG_18~41 4/5/06 6:09 PM Page 18
English -
19
Connecting & Setting Up
Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not included) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
You will enjoy high quality images.
Case 1 : Connecting to a Video
(Composite) output jack
1. Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) INPUT jack on your TV (or AV amplifier).
You will enjoy regular quality images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 20-21)
yellow
yellow
Video/Audio Cable
01085M-R135,136-XEH-ENG_18~41 4/5/06 6:09 PM Page 19
Connecting & Setting Up
20
- English
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
Case 1 : Connecting to your TV
Case 2 : Connecting to a stereo amplifier with AV
output jacks
Case 3 : Connecting to an AV amplifier with a
digital output jack
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Other type of connecting
the Audio output cable
Manufactured under licence from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
DTS, Inc.
yellow
white
red
yellow
white
red
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
DVD Recorder and COMPONENT IN(Y,P
B
,P
R
) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 20-21).
3. After connecting, refer to the page 34 to 35.
You will enjoy high quality and accurate colour
reproduction images.
The Component jacks will not output
video resolutions above 576p.
To view 720p and 1080i connect the DVD
Recorder to your TV with the supplied
HDMI cable.
With HDMI connected, press the P.SCAN
button to alternate between all available
resolutions.
(See page 37)
Make sure that the colour coded
connections match. The Y, P
B
, P
R
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
Progressive setting is only available when
the Video Out is set to Component.
(See page 34)
NOTE
green
blue
red
green
blue
red
01085M-R135,136-XEH-ENG_18~41 4/5/06 6:09 PM Page 20
1 / 1

Samsung DVD-R135 Používateľská príručka

Kategória
DVD prehrávače
Typ
Používateľská príručka