Samsung DVD-VR350 Používateľská príručka

Instruction Manual

DVD-VR350

DVD-VR355

AK68-01293M

EnglishEnglish MagyarMagyar âeskyâesky SlovenãinaSlovenãina

01293M-VR350,355-XEH-ENG.indb 101293M-VR350,355-XEH-ENG.indb 1 2007-03-12 오후 12:12:322007-03-12 오후 12:12:32

Getting Started

English - 2

Getting Started

CAUTION

• Apparatus shall not be exposed to dripping or splashing

and no objects ﬁ lled with liqulds, such as vases, shall

be placed on the apparatus.

• The Mains plug is used as a disconnect device and

shall stay readily operable at any time.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a

moulded plug incorporating a fuse. The value of the

fuse is indicated on the pin face of the plug. If it requires

replacing, a fuse approved to BS1362 of the same rating

must be used. Never use the plug with the fuse cover

omitted if the cover is detachable.

If a replacement fuse cover is required, it must be of the

same colour as the pin face of the plug. Replacement

covers are available from your dealer. If the ﬁ tted plug

is not suitable for the power points in your house or the

cable is not long enough to reach a power point, you

should obtain a suitable safety approved extension lead

or consult your dealer for assistance.

However, if there is no alternative to cutting off the plug,

remove the fuse and then safely dispose of the plug. Do

not connect the plug to a mains socket, as there is a risk

of shock hazard from the bared ﬂ exible cord.

To disconnect the apparatus from the mains, the plug

must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

The product unit accompanying this user manual is

licensed under certain intellectual property rights of

certain third parties. This license is limited to private non-

commercial use by end-user consumers for licensed

contents. No rights are granted for commercial use.

The license does not cover any product unit other than

this product unit and the license does not extend to any

unlicensed product unit or process conforming to ISO/IEC

11172-3 or ISO/IEC 13818-3 used or sold in combination

with this product unit. The license only covers the use

of this product unit to encode and/or decode audio ﬁ les

conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

No rights are granted under this license for product

features or functions that do not conform to the ISO/IEC

11172-3 or ISO/IEC 13818-3.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important instructions

accompanying the product.

Do not install this equipment in a conﬁ ned space such

as a bookcase or similar unit.

WARNING : To prevent damage which may result in ﬁ re

or electric shock hazard, do not expose this

appliance to rain or moisture.

CAUTION : DVD RECORDER & VCR USES AN

INVISIBLE LASER BEAM WHICH CAN

CAUSE HAZARDOUS RADIATION

EXPOSURE IF DIRECTED.

BE SURE TO OPERATE RECORDER

CORRECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

This product satisﬁ es CE regulations when shielded

cables and connectors are used to connect the unit to

other equipment. To prevent electromagnetic interference

with electric appliances, such as radios and televisions,

use shielded cables and connectors for connections.

Warning

01293M-VR350,355-XEH-ENG.indb 201293M-VR350,355-XEH-ENG.indb 2 2007-03-12 오후 12:12:542007-03-12 오후 12:12:54

Getting Started

English - 3

• Clean the disc by wiping in a straight line from the inside

to the outside of the disc.

For safety reasons, be sure to disconnect the AC power

cord from the AC outlet.

•

Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

• Use discs with regular shapes.

If an irregular disc (a disc with

a special shape) is used, this

DVD Recorder & VCR may be

damaged.

Holding discs

• Avoid touching the surface of a disc

where recording is performed.

DVD-RAM, DVD±RW and DVD±R

• Clean with an optional DVD-RAM

/PD disc cleaner. Do not use

cleaners or cloths for CDs to clean

DVD-RAM/DVD±RW/DVD±R discs.

DVD-Video, Audio CD

•

Wipe off dirt or contamination on the disc with a soft cloth.

Cautions on handling discs

• Do not write on the printed side with a ball-point pen or

pencil.

• Do not use record cleaning sprays or antistatic. Also, do

not use volatile chemicals, such as benzene or thinner.

• Do not apply labels or stickers to discs. (Do not use

discs ﬁ xed with exposed tape adhesive or leftover

peeled-off stickers.)

• Do not use scratch-proof protectors or covers.

• Do not use discs printed with label printers available on

the market.

• Do not load warped or cracked discs.

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

• If you move your DVD Recorder & VCR suddenly from a

cold place to a warm place, condensation may generate

on the operating parts and lens and cause abnormal

disc playback. In this case, do not connect the plug to

the power outlet and wait for two hours. Then insert the

disc and try to play again.

Important Safety Instructions

▌

Read these operating instructions carefully before using the

unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliﬁ ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. if

the provided plug does not ﬁ t into your outlet, consult

an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁ ed by the

manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or table

speciﬁ ed by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualiﬁ ed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Before connecting other components to this recorder,

be sure to turn them all off.

• Do not move the recorder while a disc is being played,

or the disc may be scratched or broken, and the

recorder’s internal parts may be damaged.

• Do not put a ﬂ ower vase ﬁ lled with water or any small

metal objects on the recorder.

• Be careful not to put your hand into the disc tray.

•

Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static

electricity can affect normal operation of this recorder.

If this occurs, turn the DVD Recorder & VCR off and

on again with the /I button, or disconnect and then

reconnect the AC power cord to the AC power outlet.

The recorder will operate normally.

• Be sure to remove the disc and turn off the recorder

after use.

•

Disconnect the AC power cord from the AC outlet when you

don’t intend to use the recorder for long periods of time.

Handling Cautions

▌

Maintenance of Cabinet

▌

Disc Handling

▌

Disc Storage

▌

Precaution

01293M-VR350,355-XEH-ENG.indb 301293M-VR350,355-XEH-ENG.indb 3 2007-03-12 오후 12:12:552007-03-12 오후 12:12:55

Getting Started

English - 4

● DVD-VR350

This unit allows you to record and playback high quality

digital images on a DVD-RAM/DVD-RW/DVD-R disc.

You can record and edit digital video on DVD-RAM/

DVD-RW/DVD-R discs as if they were VCR tapes.

(DVD+RW/DVD+R discs can be played, but cannot be

recorded.)

● DVD-VR355

This unit allows you to record and playback high quality

digital video on DVD-RAM/DVD±RW/DVD±R discs.

You can record and edit digital video on DVD-RAM/

DVD±RW/DVD±R discs as if they were VCR tapes.

DVD-Video

• A digital versatile disc (DVD) can contain up to

135-minutes of images, 8 audio languages and 32

subtitle languages.

It is equipped with MPEG-2 picture compression and

Dolby 3D surround, allowing you to enjoy vivid and clear

theatre quality images in the comfort of your own home.

• When switching from the ﬁ rst layer to the second layer

of a double-layered DVD Video disc, there may be

momentary distortion in the image and sound.

This is not a malfunction of the unit.

•

Once a DVD±R/DVD-RW(V) recorded is ﬁ nalised, it is

playable in a standard DVD player.

Audio CD

• An audio disc on which 44.1kHz PCM Audio is recorded.

• Plays CD-DA format audio CD-R and CD-RW discs.

This unit may not be able to play some CD-R or CD-RW

discs due to the condition of the recording.

CD-R/-RW

MP3 CD-R/-RW

• Only CD-R discs with MP3 ﬁ les recorded with ISO9660

or JOLIET format can be played back

• Only MP3 ﬁ les with the “mp3” or “MP3” extension can

be used.

• For MP3 ﬁ les recorded with a VBR (Variable Bit Rates),

from 32 Kbps to 320 Kbps, the sound may cut in out.

• Playable bitrate range is from 56Kbps to 320Kbps.

•

The unit can handle a maximum of 1000 ﬁ les and folders.

• DVD-RAM/DVD±RW/DVD±R discs that contain MP3

ﬁ les can be played back.

JPEG CD-R/-RW

•

Only JPEG ﬁ les with the “.jpg”, “.JPG” extension can be used.

•

The unit can handle a maximum of 1000 ﬁ les and folders.

• Maximum size of progressive JPEG is 3M pixels.

• MOTION JPEG is not supported.

• DVD-RAM/DVD±RW/DVD±R discs that contain JPEG

ﬁ les can be played back.

Using CD-R/-RW

• Use a 700MB (80 minutes) CD-RW/-R disc.

If possible, do not use a 800MB (90 minutes) or above

disc, as the disc may not play back.

• If the CD-RW/-R disc was not recorded as a closed

session, you may experience a delay in the early play-

back time, and all recorded ﬁ les may not play.



Disc Speciﬁ cations

▌

• Some CD-RW/-R discs may not be playable with this

unit, depending on the device which was used to burn

them. For contents recorded on CD-RW/-R media

from CDs for your personal use, playability may vary

depending on contents and discs.

Using MPEG4 disc

• Disc : CD-R/-RW, DVD-RAM, DVD±R/DVD±RW

• MPEG4 File with following extensions can be played :

.avi, .divx, .AVI, .DIVX

• MPEG4 Codec Format : DivX 3.11 DivX 4.x DivX 5.x

DivX-Pro Xvid

• Motion Compensation : QPEL, GMC

• four CC : MPG4, mpg4, DIV3, divX3, DIVX, divX, DX50,

MP43, mp43, XVID, xvid

• Available Audio Format : “MP3”, “MPEG1 Audio Layer2”,

“LPCM”, “AC3”, “DTS”, “MS ADPCM”

•

Supported subtitle ﬁ le formats: .smi, .srt, .sub, .psb, .txt, .ass

DVD±R Disc Playback and Recording

• Once a DVD±R recorded is ﬁ nalised, it is playable in a

standard DVD player.

•

You can record onto the available space on the disc and

perform editing functions such as giving titles to discs and

programmes and erasing programmes before ﬁ nalising.

• When programming is erased from a DVD±R, that

space does not become available. Once an area on a

DVD±R is recorded on, that area is no longer available

for recording, whether the recording is erased or not.

•

It takes about 30 seconds for the unit to complete recording

management information after recording ﬁ nishes.

• This product optimizes the DVD±R for each recording.

Optimizing is carried out when you start recording after

inserting the disc or turning on the unit. Recording onto

the disc may become impossible if optimizing is carried

out too many times.

• Playback may be impossible in some cases due to the

condition of recording.

• This unit can play back DVD±R discs recorded and

ﬁ nalised with a Samsung DVD video recorder. It may

not be able to play some DVD±R discs depending on

the disc and the condition of the recording.

DVD-RW Disc Playback and Recording

• Recording and playback can be performed on DVD-RW

discs in both V and VR Modes.

• Once a DVD-RW recorded in VR Mode is ﬁ nalised, you

cannot perform additional recording.

• Once a DVD-RW recorded in V Mode is ﬁ nalised, it

becomes DVD-Video.

• In both modes, playback can be performed before and

after ﬁ nalisation, but additional recording, deleting and

editing can not be performed after ﬁ nalisation.

•

If you want to record the disc in VR Mode and then record

in V Mode, be sure to execute Format. Be careful when

executing Format because all the recorded data may be lost.

• For an unused disc, a message that asks whether to

initialise a disc or not.

If you select "Yes", disc will be formatted in VR mode.

• DVD-RW(VR mode)

- This is a format that is used for recording data on

a DVD-RW disc. You can repeat recording, editing,

deleting, partial deletion, creation of playlist, and etc.

- A disc that is recorded in this mode may not be played

by existing DVD players.



01293M-VR350,355-XEH-ENG.indb 401293M-VR350,355-XEH-ENG.indb 4 2007-03-12 오후 12:12:572007-03-12 오후 12:12:57

Getting Started

English - 5

• DVD-RW(V mode)

- This is a format that is used for recording data on a

DVD- RW or DVD-R disc. The disc can be played by an

existing DVD player once it has been ﬁ nalised.

-

If a disc that has been recorded in V mode by a different

manufacturer’s recorder but has not been ﬁ nalised it cannot

be played or additionally be recorded by this recorder.

DVD+RW Disc Playback and Recording

• With DVD+RW discs, there is no difference between

DVD-Video format(Video mode) and DVD-Video

Recording format (VR mode).

• You can make your own chapters on DVD+RWs and

edit them using the Chapter Edit menu.

• Finalising is generally unnecessary when using a

DVD+RW disc.

DVD-RAM Disc Playback and Recording

• For cartridge type DVD-RAM discs, remove the

cartridge and use the disc only.

• Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

• You cannot play a DVD-RAM in most DVD players due

to compatibility issues.

• Only DVD-RAM standard Version 2.0 discs can be

played in this unit.

•

DVD-RAM recorded on this unit may not work with other

DVD Players. To determine compatibility with these DVD-

RAM discs, refer to the user’s manual for the player.

Protection

• Programme-protected: See page 66 “Locking a Title”

• Disc-protected: See page 75 “Disc Protection”

✻

DVD-RAM/DVD±RW/DVD±R discs that are

incompatible with the DVD-VIDEO format can not be

played with this product.

✻

For more information on DVD recording compatibility,

consult your DVD-RAM/DVD±RW/DVD±R

manufacturer.

✻

Use of poor quality DVD-RAM/DVD±RW/DVD±R discs

may cause following unexpected problems including,

without limitation, recording failure, loss of recorded or

edited materials or damage to the recorder.

Do not use the following discs!

• LD, CD-G, CD-I, CD-ROM, DVD-ROM discs should not

be used in this product.

[Note]

Disc types that can be played : CD/CD-RW/-R/MP3/

JPEG/ DVD-Video/DVD-RAM/DVD±RW/DVD±R.

However, if your DVD-RW/-R disc was recorded with

another device, it can be played only if it was recorded

and ﬁ nalised in V mode.

• Some commercial discs and DVD discs purchased

outside your region may not be playable with this

product. When these discs are played, either “No

Disc.” or “The disc cannot be played. Please check the

regional code of the disc.” will be displayed.

• If your DVD-RAM/DVD±RW/DVD±R disc is an illegal

copy or is not in DVD video format, it may also not be

playable.

Disc compatibility

• A 8X speed DVD+RW or greater disc can be played, but

maximum recording speed is 4x.

• Not all brands of discs will be compatible with this unit.



COPY PROTECTION

• Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVD

Recorder & VCR directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture

from copy-protected DVD discs.

• This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

•

It is permissible to record television programmes, ﬁ lm,

video tapes and other material only in the event that

third party copyrights and other rights are not violated.

01293M-VR350,355-XEH-ENG.indb 501293M-VR350,355-XEH-ENG.indb 5 2007-03-12 오후 12:12:582007-03-12 오후 12:12:58

Getting Started

English - 6

Contents

Getting Started

Warning .................................................................. 2

Precaution ..............................................................3

Important Safety Instructions..................................3

Handling Cautions ..................................................3

Maintenance of Cabinet .........................................3

Disc Handling .........................................................3

Disc Storage ...........................................................3

Disc Speciﬁ cations .................................................4

General Features ...................................................8

Before Reading the User’s Manual ........................9

How to use the DVD Recorder & VCR ...................9

Unpacking ..............................................................10

Description .............................................................12

Front Panel (DVD-VR350)......................................12

Front Panel (DVD-VR355)......................................12

Front Panel Display ................................................13

Rear Panel (DVD-VR350) ......................................13

Rear Panel (DVD-VR355) ......................................14

Tour of the Remote Control ....................................15

Connecting & Setting Up

Connecting DVD Recorder & VCR to the TV using

the RF Cable .........................................................16

Connecting the SCART Cable ................................16

Case 1 : Connecting DVD Recorder & VCR to the

TV using the SCART Cable ....................................16

Case 2 : Connecting DVD Recorder & VCR to a

Satellite Receiver or Other Equipment ...................17

Connecting the Audio/Video Cable ......................... 18

Connecting the S-Video Cable ...............................18

Connecting the Component Video Cable ...............19

Connecting HDMI/DVI to a TV (DVD-VR355 only)

..20

Case 1 : Connecting to a TV with HDMI Jack ........20

Case 2 : Connecting to a TV with DVI Jack ...........20

AV Receiver Connections .......................................21

Connecting External Devices .................................21

Case1 : Connecting an external devices to the

AV3 jacks ................................................................21

Case 2 : Connecting a DV Device to the DV IN jack

.. 21

System Setup

On-Screen Menu Navigation ..................................22

■

Plug & Auto Setup ..................................................22

Setting the Date and Time ......................................23

Auto Setup..............................................................23

Manual Setup .........................................................24

Selecting the RF OUT Sound Mode (B/G-D/K) ......24

VIDEO Output CH ..................................................25

Setting Up the Language Options ..........................25

Setting Up the Audio Options .................................26

Setting Up the Display (Video) Options .................. 27

Progressive scan ....................................................28

Setting Up the Parental Control..............................30

VCR Setting............................................................31

Automatic Chapter Creator.....................................32

Quick Recording .....................................................33

Anynet+(HDMI-CEC) (DVD-VR355 only) ............... 33

Playback



DVD Playback

Region code (DVD-Video only) ..............................35

Logos of Discs that can be played .........................35

Disc types that can be played ................................35

Playing a Disc.........................................................36

Using the Disc Menu and Title Menu......................37

Using the Search & Skip Functions ........................ 37

Slow Motion Play/Step Motion Play........................38

Using the ANYKEY button ......................................39

Moving to a desired scene directly .........................39

Repeat Play ............................................................40

Selecting the Subtitle Language.............................40

Selecting the Audio language .................................41

Changing the Camera Angle ..................................41

Zooming-In .............................................................41

Using the Bookmarks .............................................42

Using the Markers ..................................................43

Playing back an Audio CD (CD-DA)/MP3...............44

Buttons on the Remote Control used for Audio

CD(CD-DA)/MP3 playback .....................................44

Playing back an Audio CD (CD-DA) ....................... 44

Playing back an MP3 Disc......................................45

Repeat Playback of an Audio/MP3 Disc .................45

Play Option Mode ...................................................46

To Programme Tracks ............................................46

■

01293M-VR350,355-XEH-ENG.indb 601293M-VR350,355-XEH-ENG.indb 6 2007-03-12 오후 12:12:592007-03-12 오후 12:12:59

Getting Started

English - 7

Playing back a Picture Disc ....................................46

Playing back an MPEG4 Disc ................................47



VCR Playback

Playing back a VHS Tape (VCR) ............................48

Tracking ..................................................................48

Special VCR Playback Features ............................48

Variable Search System ......................................... 49

Recording



DVD Recording

Recordable discs ....................................................50

Compatibility between Samsung and Other

Company’s Recorder .............................................. 50

Recording Formats .................................................51

Recording Mode .....................................................51

Unrecordable video ................................................52

Recording immediately ...........................................53

Recording through a DV Input jack ........................54

Making a One Touch Recording (OTR) ..................54

Making a Timer Recording .....................................55

Editing the Scheduled Record List .........................57

Deleting the Scheduled Record List .......................57

Using the ShowView Feature .................................58

ShowView Extended ..............................................58

EZ REC MODE ...................................................... 59



VCR Recording

Basic VCR Recording.............................................60

Check Remaining Time ..........................................61

Special Recording Features ...................................61

Copy to DVD or VCR..............................................62

To copy from DVD to VCR......................................62

To copy from VCR to DVD......................................63

Editing

Playing the Title List ...............................................64

Recording on Free space .......................................65

Basic Editing (Title List) .......................................... 65

Renaming (Labeling) a Title ...................................65

Locking (Protecting) a Title .....................................66

Deleting a Title........................................................66

Deleting a Section of a Title....................................67

Editing a Chapter....................................................67

Dividing a Title ...................................................... 69

■

Advanced Editing (Playlist).....................................70

Creating a Playlist ..................................................70

Playing Titles in the Playlist ................................... 71

Renaming a Playlist Title ........................................ 71

Editing a Scene for the Playlist...............................71

Copying a Playlist to the VCR ................................74

Deleting a Playlist from the Playlist ........................74

Disc Manager .........................................................75

Editing the Disc Name ............................................75

Disc Protection .......................................................75

Formatting a Disc ...................................................76

Finalising a Disc .....................................................76

Unﬁ nalising a Disc (V/VR mode) ............................77

Delete All Title Lists ................................................ 78

Edit Compatible ......................................................78

Reference

Troubleshooting ......................................................79

Speciﬁ cations .........................................................82

■

01293M-VR350,355-XEH-ENG.indb 701293M-VR350,355-XEH-ENG.indb 7 2007-03-12 오후 12:13:002007-03-12 오후 12:13:00

Getting Started

English - 8

A variety of functions with easy-to-use user interface

Integrated menu system and messaging functionality

allow you to perform the desired operations easily and

conveniently. With a DVD-RAM/DVD-RW(VR mode) disc,

you can edit recorded images, create playlist, and edit

images in speciﬁ c sequence according to your needs.

MPEG4 playback

This DVD Recorder & VCR can play MPEG4 formats

within an avi ﬁ le.

DivX Certiﬁ cation

DivX, DivX Certiﬁ ed, and associated logos

are trademarks of DivXNetworks Inc, and

are used under licence.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital

video/audio signal path from the DVD Recorder & VCR to

your TV. (DVD-VR355 only)

EZ REC MODE

This function allows you Initialise and Finalise a disc

automatically. (See page 59)

● DVD-VR350

This unit allows you to record and playback high quality

digital images on a DVD-RAM/DVD-RW/DVD-R disc.

You can record and edit digital video on DVD-RAM/

DVD-RW/DVD-R discs as if they were VCR tapes.

(DVD+RW/DVD+R discs can be played, but cannot be

recorded.)

● DVD-VR355

This unit allows you to record and playback high quality

digital video on DVD-RAM/DVD±RW/DVD±R discs.

You can record and edit digital video on DVD-RAM/

DVD±RW/DVD±R discs as if they were VCR tapes.

High quality digital audio and video recording and

playback

You can record up to approximately 16-hours of video on

a double side 9.4 GB DVD-RAM disc,up to 15-hours on a

dual-layer 8.5GB DVD±R disc, and up to 8-hours on a 4.7

GB DVD-RAM/DVD±RW/DVD±R disc, depending on the

recording mode.

Creating DVD video titles using DVD±RW/DVD±R discs

With the DVD-VR350,VR355 you can create your own

DVD video titles on 4.7 GB DVD±RW/DVD±R discs.

A Variety of Recording Options

Select an appropriate recording mode between XP, SP,

LP and EP to meet your recording needs. (See page 51)

• XP mode - High quality, about 1 hour

• SP mode - Standard quality, about 2 hours

• LP mode - Low quality, about 4 hours

• EP mode - Lower quality, about 6 or 8 hours

- The dual layer DVD±Rs have approximately double the

capacity of single layer DVD±Rs. (See page 35.)

Copying digital camcorder content using DV input jack

Record DV Device onto DVD-RAM/DVD±RW/DVD±R

discs or video tape using the DV input jack (IEEE1394-

4pin). (See page 54)

High quality progressive scan

Progressive scanning provides high resolution and ﬂ icker

free images. The 10-bit 54-MHz DAC, 2D Y/C Separating

circuitry and Time Base Corrector processor technology

provide you with the highest image playback and

recording quality. (See page 19)

General Features

01293M-VR350,355-XEH-ENG.indb 801293M-VR350,355-XEH-ENG.indb 8 2007-03-12 오후 12:13:012007-03-12 오후 12:13:01

Getting Started

English - 9

Make sure to check the following terms before

reading the user’s manual.

Icons that will be used in manual

Before Reading the User’s Manual

How to use the DVD Recorder & VCR

Please check available disc type before recording.

● DVD-VR350

(DVD+RW/DVD+R discs can be played, but cannot be

recorded.)

● DVD-VR355

If you want to repeatedly record on the same disc or you

want to edit the disc after recording, select a rewritable

DVD±RW or DVD-RAM type disc. If you want to save a

recording without any changes, choose a non-rewritable

DVD±R.

Step 1 : Select the disc type

▌

Unlike a VCR, the recorder automatically starts formatting

when an unused disc is inserted. This is required for the

preparation of recording on a disc.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video

Recording format (VR mode). You can edit recorded

images and create a playlist in a speciﬁ c sequence

according to your requirements.

Using a DVD±RW/+R

• When an unused DVD±RW/+R disc is ﬁ rst inserted,

the message “Uninitialised Disc. Do you want to

initialise this disc?” will be displayed. If you select Yes,

initialising will be start. DVD-RW disc can be formatted

in either DVD-Video format (Video mode) or DVD-Video

Recording format (VR mode)

• With DVD+RW discs, there is no difference between

DVD-Video format (Video mode) and DVD-Video

Recording format (VR mode).

Using a DVD-R

Formatting disc is unnecessary and only V mode Recording

is supported. You can play this type of disc on various DVD

components only when they have been ﬁ nalised.

Step 2 : Format the disc to start recording

▌

You can only use either the VR or V mode on a

DVD-RW, but not both at the same time.

You can format a DVD-RW to V or VR mode using

disc manager. It should be noted that the data of

the disc may be lost when changing formats.

■

There are two different recording methods: Direct

Recording and Timer Recording. Timer recording is

classiﬁ ed as a Date : Once, Daily or Weekly.

Recording mode : XP (high quality mode), SP (standard

quality mode), LP (long recording mode), and EP

(extended mode).

Step 3 : Recording

▌

Icon Term Deﬁ nition

DVD

This involves a function available

DVD or DVD-RW(V)/DVD±R

discs that have been recorded

and ﬁ nalised.

RAM

This involves a function available

in DVD-RAM.

-RW

This involves a function available

in DVD-RW.

-R

This involves a function available

in DVD-R.

+RW

This involves a function available

in DVD+RW.

+R

This involves a function available

in DVD+R.

CD

This involves a function

available in a data CD (CD-R or

CD-RW).

JPEG

This involves a function

available in CD-R/-RW or DVD-

RAM/DVD±RW/DVD±R discs.

MP3

This involves a function

available in CD-R/-RW or DVD-

RAM/DVD±RW/DVD±R discs.

MPEG4

This involves a function available

in a data CD-R/-RW or DVD-

RAM/DVD±RW/DVD±R discs.

VHS

This involves a function

available in VIDEO Tape.

Caution

This involves a case where a

function does not operate or

settings may be canceled.

NOTE

This involves tips or instructions

on the page that help each

function operate.

One-Touch

button

A function that can be operated

button by using only one button.

ANYKEY

button

A function that can be operated

by using ANYKEY button.

About the use of this user’s manual

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~5)

2) If a problem occurs, check the Troubleshooting.

(See pages 79~81)

Copyright

manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.

01293M-VR350,355-XEH-ENG.indb 901293M-VR350,355-XEH-ENG.indb 9 2007-03-12 오후 12:13:032007-03-12 오후 12:13:03

Getting Started

English - 10

Step 4 : Playing

▌

You can select the title you want to play in a displayed

menu and then immediately start playback.

A DVD consists of sections called titles, and sub sections

called chapters.

During recording, a title is created between two points

where you start and stop recording.

Chapters will be created automatically when you ﬁ nalise

recording on DVD-RW/-R discs in V mode.

You can make your own chapters on DVD+RWs and edit

them using the Chapter Edit menu.

The chapter’s length (interval between chapters) varies

according to the recording mode.

Step 5 : Editing a recorded disc

▌

Editing on discs is easier than conventional video tapes.

The recorder supports many different edit functions,

possible only with DVDs. With a simple and easy edit

menu, you can operate various edit functions, such as

delete, copy, rename, lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/-RW in VR mode)

With this recorder, you can create a new playlist on the

same disc and edit it without the change of the original

recording.

Step 6

:

Finalising & Playing on other DVD components

▌

To play your DVD on other DVD components, ﬁ nalising

may be necessary. First, ﬁ nish all editing and recording

operations, then ﬁ nalise the disc.

When using a DVD-RW disc in VR Mode

Although ﬁ nalising is generally unnecessary when playing

the disc on a VR Mode compatible component, a ﬁ nalised

disc should be used for playback.

When using a DVD-RW disc in V mode

The disc should be ﬁ nalised ﬁ rst to enable playback

on anything other than this recorder. No more editing

or recording can be made on the disc once it has been

ﬁ nalised.

When using a DVD±R disc

You should ﬁ nalise the disc to play it on a component

other than this recorder. You cannot edit or record on the

disc once it has been ﬁ nalised.

Install Batteries in the Remote Control

• Open the battery cover on the back of the remote

control.

• Insert two AAA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

• Replace the battery cover.

If the remote control does not operate properly:

• Check the polarity +/- of the batteries (Dry-Cell)

• Check if the batteries are drained.

• Check if the remote sensor is blocked by obstacles.

• Check if there is any ﬂ uorescent lighting nearby.

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

• Audio/Video Cable

• RF Cable for TV Control

• Remote control.

• Batteries for Remote Control (AAA Size)

• User’s Manual

• Quick Guide

Accessories

▌

Preparing the Remote Control

▌

You can ﬁ nalise discs automatically using EZ

REC MODE. (see page 59)

■

Unpacking

01293M-VR350,355-XEH-ENG.indb 1001293M-VR350,355-XEH-ENG.indb 10 2007-03-12 오후 12:13:052007-03-12 오후 12:13:05

Getting Started

English - 11

Result: If your television is compatible with the remote

control, it will switch off. It is now programmed to

operate with the remote control.

To determine whether your television is compatible, follow the instructions below.

1. Switch your television on.

2. Point the remote control towards the television.

3. Press and hold the TV button and enter the two-ﬁ gure code simultaneously corresponding to the brand of your

television, by pressing the appropriate number buttons.

Controllable TV Codes

You can then control the television using the

following buttons.

If several codes are indicated for your television

brand, try each one in turn until you ﬁ nd one that

works.

If you replace the remote control’s batteries, you

must set the brand code again.

■

BRAND SELECT NUMBER

SAMSUNG

TV +01, +02, +03, +04, +05, +06, +35

AKAI

TV +12

BANG & OLUFSEN

TV +22

BLAUPUNKT

TV +09

BRANDT

TV +14

BRIONVEGA

TV +22

CGE

TV +21

CONTINENTAL EDISON

TV +24

FERGUSON

TV +14

FINLUX

TV +02, +17, +21

FISHER

TV +12

FORMENTI

TV +22

GRUNDIG

TV +09, +17, +21

HITACHI

TV +11, +13, +14, +24

IMPERIAL

TV +21

JVC

TV +32

LG

TV +02, +30

LOEWE

TV +02

LOEWE OPTA

TV +02, +22

METZ

TV +22

MITSUBISHI

TV +02, +16

MIVAR

TV +21, +29

NOKIA

TV +23

NORDMENDE

TV +13, +14, +22, +24

PANASONIC

TV +08, +23, +24, +25, +26, +27

PHILIPS

TV +02, +20, +22

PHONOLA

TV +02, +20, +22

PIONEER

TV +14, +23

RADIOLA

TV +02, +20

RADIOMARELLI

TV +22

REX

TV +23

SABA

TV +13, +14, +22, +23, +24

SALORA

TV +23

SANYO

TV +12, +16

SCHNEIDER

TV +02

SELECO

TV +23

SHARP

TV +10, +16, +31

SIEMENS

TV +09

SINGER

TV +22

SINUDYNE

TV +22

SONY

TV +15, +16

TELEAVA

TV +14

TELEFUNKEN

TV +14, +24, +28

THOMSON

TV +13, +14, +24

BRAND SELECT NUMBER

THOMSON ASIA

TV +33, +34

TOSHIBA

TV +07, +16, +17, +18, +19, +21

WEGA

TV +22

YOKO

TV +02

Button Function

STANDBY/ON

Used to switch the television on and off.

INPUT SEL. Used to select an external source.

TV VOL (+ or -)

Used to adjust the volume of the television.

PROG (

or

)

Used to select the desired Programme.

TV MUTE Used to toggle the sound on and off.

0~9 Used to input number directly.

01293M-VR350,355-XEH-ENG.indb 1101293M-VR350,355-XEH-ENG.indb 11 2007-03-12 오후 12:13:062007-03-12 오후 12:13:06

Getting Started

English - 12

Front Panel (DVD-VR350)

▌

Front Panel (DVD-VR355)

▌

1. DVD DECK

2. DVD OPEN/CLOSE BUTTON

3. VCR DECK

4. VCR EJECT BUTTON

5. STANDBY/ON BUTTON

6. VIDEO INPUT JACK (AV3 IN)

7. AUDIO INPUT JACK (AV3 IN)

8. DV INPUT JACK

9. P.SCAN BUTTON

10. FRONT PANEL DISPLAY

11. DVD/VCR SELECT BUTTON

12. COPY BUTTONS

13. PROG / BUTTONS

14. RECORD BUTTON

15. STOP BUTTON

16. PLAY/PAUSE BUTTON

Description

1. DVD DECK

2. DVD OPEN/CLOSE BUTTON

3. VCR DECK

4. VCR EJECT BUTTON

5. STANDBY/ON BUTTON

6. VIDEO INPUT JACK (AV3 IN)

7. AUDIO INPUT JACK (AV3 IN)

8. DV INPUT JACK

9. P.SCAN BUTTON

10. FRONT PANEL DISPLAY

11. DVD/VCR SELECT BUTTON

12. COPY BUTTONS

13. PROG / BUTTONS

14. RECORD BUTTON

15. STOP BUTTON

16. PLAY/PAUSE BUTTON

1 2 3 4

161514

13

121110

9876

5

1 2 3 4

161514

13

121110

9876

5

01293M-VR350,355-XEH-ENG.indb 1201293M-VR350,355-XEH-ENG.indb 12 2007-03-12 오후 12:13:082007-03-12 오후 12:13:08

Getting Started

English - 13

1. DVD is activated.

2. DVD-RAM is activated.

3. DVD(±)R or DVD(±)RW is activated.

4. Progressive Scan mode is activated.

5. Record function is activated.

6. VCR is activated.

7. DVD or CD media is loaded.

8. The time, counter position or current deck

status is indicated.

9. When you set a Timer recording, this

indicator is illuminated.

10. VHS Video tape is loaded.

Front Panel Display

▌

12345 6

10

987

1. S-VIDEO OUT JACK

2. AUDIO L, R OUT JACKS

3. DIGITAL AUDIO OUT JACK

(OPTICAL/COAXIAL)

4. AUDIO/VIDEO JACK (AV OUT)

5. AV1 (TV) IN/OUT SCART

6. AV2 (EXT) SCART

7. COMPONENT VIDEO OUT JACKS

8. OUT TO TV CONNECTOR

9. AERIAL IN CONNECTOR

Rear Panel (DVD-VR350)

▌

123 4567 89

01293M-VR350,355-XEH-ENG.indb 1301293M-VR350,355-XEH-ENG.indb 13 2007-03-12 오후 12:13:102007-03-12 오후 12:13:10

Getting Started

English - 14

1. S-VIDEO OUT JACK

2. AUDIO L, R OUT JACKS

3. DIGITAL AUDIO OUT JACK

(OPTICAL/COAXIAL)

4. AUDIO/VIDEO JACK (AV OUT)

5. AV1 (TV) IN/OUT SCART

6. AV2 (EXT) SCART

7. COMPONENT VIDEO OUT JACKS

8. OUT TO TV CONNECTOR

9. AERIAL IN CONNECTOR

10. HDMI OUTPUT (DVD-VR355 only)

Rear Panel (DVD-VR355)

▌

123 4567 89

10

01293M-VR350,355-XEH-ENG.indb 1401293M-VR350,355-XEH-ENG.indb 14 2007-03-12 오후 12:13:112007-03-12 오후 12:13:11

Getting Started

English - 15

1. DVD Button

Press this when you use a DVD.

2. TV Button

Press this to operate TV.

3. STANDBY/ON Button

4. NUMBER Button

5. IPC Button

6. F.ADV/SKIP Button

7. Playback-related Buttons

Forward/Rewind, Search, Skip, Stop, Play/Still,

REC PAUSE

8. TV VOL (Volume) Button

TV volume adjustment

9. MENU Button

Brings up the DVD Recorder & VCR’s setup menu.

10. OK/DIRECTION Buttons

(▲/▼/◄/► Buttons)

11. INFO Button

This will display current setting or disc status.

12. TITLE LIST/DISC MENU Button

Press this to enter the Title List/Disc menu.

13. SUBTITLE Button

Press this to switch the DVD’s subtitle language.

14. ANYKEY Button

Press this to view the status of the disc that is

being played.

15. REC Button

Press this to make a recording on DVD-RAM/

DVD±RW/±R discs and VHS Video tape.

16. TO DVD copy Button

Press this when you copy from the VCR to the

DVD.

17. REC SPEED Button

Press this to set the desired recording time and

picture quality.

18. VCR Button

Press this when you use a VCR.

19. INPUT SEL. Button

Select input signal in external input mode

(Tuner, AV1, AV2, AV3 or DV input).

20. OPEN/CLOSE Button

To open and close the disc tray.

21. TV STANDBY/ON Button

22. TV/VCR Button

23. MARKER Button

Press this to bookmark or mark a position while

playing a disc.

24. PROG/TRK Button

Press this to select a TV channel

/Press this to remove the white line.

25. TV MUTE Button

This operates as sound mute (TV mode).

26. RETURN Button

Returns to previous menu.

27. EXIT Button

28. PLAY LIST/TITLE MENU Button

Press this to enter the Edit playlist/Title menu.

29. AUDIO Button

Use this to access various audio functions on a

disc (DVD mode).

30. EZ REC MODE Button

31. TIMER REC Button

Press this when you use Timer Recording.

32. TO VCR copy Button

Press this when you copy from the DVD to the

VCR.

33. CANCEL Button

Your DVD Recorder & VCR remote control will work with Samsung televisions and compatible brands.

Tour of the Remote Control

▌

01293M-VR350,355-XEH-ENG.indb 1501293M-VR350,355-XEH-ENG.indb 15 2007-03-12 오후 12:13:162007-03-12 오후 12:13:16

Connecting & Setting Up

English - 16

Connecting the SCART Cable

Connecting DVD Recorder & VCR

to the TV using the RF Cable

Make sure that both the television and the

DVD Recorder & VCR are switched off before

connecting the cables.

■

To obtain better quality pictures and sound on

your television, you can also connect your DVD

Recorder & VCR to the television via the SCART

cable if your television equipped with type of

connection.

■

1. Remove the aerial or network input cable from the

television.

2. Connect this cable to the 75Ω aerial jack marked

on the rear of your DVD Recorder & VCR.

3. Plug the RF Cable supplied into the jack on your

DVD Recorder & VCR.

4. Plug the other end of the RF Cable into the connector

previously used for the aerial on the television.

Case 1 : Connecting DVD Recorder &

VCR to the TV using the SCART Cable

▌

You can connect your DVD Recorder & VCR to the

television using the SCART cable if the appropriate

input is available on the television. You thus:

• Obtain better quality sound and pictures

• Simplify the setting up procedure of your DVD Recorder

& VCR

1. Connect the Aerial Cable.

2. Connect one end of the SCART cable to the AV1 (TV)

jack on the rear of the DVD Recorder & VCR.

3. Plug the other end into the appropriate connector on

the television.

Regardless of the type of connection chosen, you

must always connect the RF Cable. Otherwise,

no picture will be visible on the screen when the

DVD Recorder & VCR is switched off.

Make sure that both the television and the

DVD Recorder & VCR are switched off before

connecting the cables.

■

Connecting & Setting Up

To RF IN

To RF OUT

RF Cable

To ANT INPUT

TV

ANT

SCART Cable

RF Cable

ANT

TV

Aerial

01293M-VR350,355-XEH-ENG.indb 1601293M-VR350,355-XEH-ENG.indb 16 2007-03-12 오후 12:13:172007-03-12 오후 12:13:17

Connecting & Setting Up

English - 17

Case 2 : Connecting DVD Recorder & VCR

to a Satellite Receiver or Other Equipment

▌

You can connect your DVD Recorder & VCR to a

Satellite receiver or other DVD Recorder & VCR

using the SCART cable if the appropriate outputs are

available on the equipment chosen.

The following illustrations give a few examples of the

connection possibilities.

1. AV1(TV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other

equipment into the AV1(TV) jack on the rear of the

DVD Recorder & VCR.

After making this connection, select the source by

pressing the INPUT SEL. button for the AV1 input

sources.

2. By means of RF Cable

After making this connection, you must preset the

station received through the satellite tuner.

RF output channel of the satellite receiver should be

adjusted away from channel 36, which is used by the

DVD Recorder & VCR, e.g. re-adjust to channel 33.

1. AV2 IN (EXT): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other

equipment into the AV2 (EXT) jack on the rear of the

DVD Recorder & VCR.

After making this connection, select the source by

pressing the INPUT SEL. button for the AV2 input

sources.

2. By means of RF Cable

After making this connection, you must preset the

station received through the satellite tuner.

RF output channel of the satellite receiver should be

adjusted away from channel 36, which is used by the

DVD Recorder & VCR, e.g. re-adjust to channel 33.

3. AV1 (TV) : By means of 21-pin Scart Cable

Connect the end of the SCART cable to the AV1 (TV)

jack on the rear of the DVD Recorder & VCR. Plug

the other end into the appropriate connector on the

television.

TV

ANT

RF Cable

Satellite Receiver or other

Equipment

Aerial Connector

Satellite Receiver or other

Equipment

Aerial Connector

TV

ANT

RF Cable

01293M-VR350,355-XEH-ENG.indb 1701293M-VR350,355-XEH-ENG.indb 17 2007-03-12 오후 12:13:202007-03-12 오후 12:13:20

Connecting & Setting Up

English - 18

You can connect your DVD Recorder & VCR to

the television using the audio/video cable if the

appropriate input is available on the television.

1. Connect one end of the video cable into the VIDEO

output jack on the rear of the DVD Recorder & VCR.

2. Plug the other end of the video cable into the

appropriate input connector on the television.

3. Connect one end of the audio cables supplied into the

AUDIO output jacks on the rear of the DVD Recorder

& VCR.

• Take care to respect the colour coding of the up and

down channels.

4. Plug the other end of the audio cables into the

appropriate input connectors on the television.

Connecting the Audio/Video

Cable

You will enjoy high quality images. S-Video seperates

the picture element into black and white(Y) and

colour(C) signals to present clearer images than

composite video output mode.

1. Connect one end of the S-Video cable into the

S-VIDEO output jack on the rear of the DVD Recorder

& VCR.

2. Plug the other end of the S-Video cable into the

appropriate input connector on the television.

3. Connect one end of the audio cable supplied into the

AUDIO output jacks on the rear of the DVD Recorder

& VCR.

• Take care to respect the colour coding of the up and

down channels.

4. Plug the other end of the audio cables into the

appropriate input connectors on the television.

Connecting the S-Video Cable

white

red

white

red

white

red

S-Video cable

(not supplied)

01293M-VR350,355-XEH-ENG.indb 1801293M-VR350,355-XEH-ENG.indb 18 2007-03-12 오후 12:13:212007-03-12 오후 12:13:21

Connecting & Setting Up

English - 19

• For more information about Progressive setting, refer to

the page 28.

• Make sure that the colour coded connections match.

That is, the Y, P

B

and P

R

component output jacks of

your DVD Recorder & VCR should be connected to the

exact corresponding component input jacks on your TV.

Otherwise, red or blue images will be displayed on the

TV screen.

• Consumers should note that not all high deﬁ nition

television sets are fully compatible with this product

and may cause artifacts to be displayed in the picture.

In case of progressive scan picture problems, it is

recommended that you switch the connection to the

standard deﬁ nition output.

If there are questions regarding your Samsung TV set’

s compatibility with this DVD Recorder & VCR, please

contact our customer service centre.

You will enjoy high quality accurate colour reproduction

images. Component video seperates the picture

element into black and white(Y), blue(P

B

), red(P

R

)

signals to present most clear and clean images.

1. Connect Component video cables between the

COMPONENT VIDEO OUT jacks on the rear of the

DVD Recorder & VCR and COMPONENT VIDEO IN

jacks on the rear of the TV.

2. Connect audio cables between the audio output jacks

on the rear of the DVD Recorder & VCR and AUDIO

IN jacks on the rear of the TV.

• Take care to respect the colour coding of the up and

down channels.

• Press the input selector on your TV remote control

until the Component signal from the DVD Recorder &

VCR appears on your TV screen.

Connecting the Component

Video Cable

Progressive Scan

▌

Your TV must support progressive scan input to

allow to watch progressive scan component video

out. (See page 28)

See your TV User’s Manual to ﬁ nd out if your TV

supports Progressive Scan.

If Progressive Scan is supported, follow the TV

User’s instructions regarding Progressive Scan

settings in the TV’s menu system.

Depending on your TV, the method of connection

may differ from the illustration above.

What is “Progressive Scan”?

Progressive scan has twice as many scanning

lines as the interlace output method has.

Progressive scanning method can provide better

and clearer picture quality.

You must connect the DVD Recorder & VCR to

the component(s) before using the Progressive

Scan feature.

The Component jacks will not output video

resolutions above 576p.

To view 720p and 1080i, connect the DVD

Recorder & VCR to your TV with the HDMI cable.

With HDMI connected, press the P.SCAN button

to alternate between all available resolutions.

(See page 29) (DVD-VR355 only)

■

COMPONENT INPUT

red

white

red

white

Component

cable

(not supplied)

01293M-VR350,355-XEH-ENG.indb 1901293M-VR350,355-XEH-ENG.indb 19 2007-03-12 오후 12:13:232007-03-12 오후 12:13:23

Connecting & Setting Up

English - 20

If your TV has a HDMI/DVI input, connect the HDMI/

DVI cable to the TV. You will enjoy the best quality

images and sounds.

Connecting HDMI/DVI to a TV

(DVD-VR355 only)

Case 1 : Connecting to a TV with HDMI Jack

▌

• Using the HDMI cable, connect the HDMI OUT jack on

the rear of the DVD Recorder & VCR to the HDMI IN

jack of your TV.

• Press the input selector on your TV remote control

until the HDMI signal from the DVD Recorder & VCR

appears on your TV screen.

To change HDMI output resolution, see pages

28~29.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI is an interface to enable the digital

transmission of video and audio data with just a

single connector. Since HDMI is based on DVI,

it is completely compatible with DVI. The only

difference between HDMI and DVI is that HDMI

supports multi-channel audio.

Using HDMI, the DVD Recorder & VCR transmits

a digital video and audio signal and displays a

vivid picture on a TV having an HDMI input jack.

HDMI connection description

HDMI connector - Both uncompressed video data

and digital audio data (LPCM or Bit Stream data).

- Though the DVD Recorder & VCR uses a HDMI

cable, the DVD Recorder & VCR outputs only a

pure digital signal to the TV.

- If TV does not support HDCP (High-bandwidth

Digital Content Protection), snow noise appears

on the screen.

Why does Samsung use HDMI?

Analog TVs require an analog video/audio

signal. However, when playing a DVD, the data

transmitted to a TV is digital. Therefore either a

digital-to-analog converter (in the DVD Recorder

& VCR) or an analog-to-digital converter (in

the TV) is required. During this conversion, the

picture quality is degraded due to noise and

signal loss. HDMI technology is superior because

it requires no D/A conversion and is a pure digital

signal from the DVD Recorder & VCR to your TV.

What is the HDCP?

HDCP (High-bandwidth Digital Content

Protection) is a system for protecting DVD

content outputted via HDMI from being copied.

It provides a secure digital link between a video

source (PC, DVD, etc) and a display device (TV,

projector, etc). Content is encrypted at the source

device to prevent unauthorized copies from being

made.

■

HDMI cable

(not supplied)

red white

DVI adapter cable

(not supplied)

To watch through the HDMI output, set the

digital audio output to PCM. (See page 26)

Depending on the HDMI device (TV/HDMI Receiver)

you use, audio may not be supported. If TV does

not support Dolby digital/DTS, Audio output is not

available when you set Digital output as Bitstream

or select DTS On in Audio setup menu. In this case,

set the digital audio output to PCM or DTS off.

If you connect the HDMI cable between Samsung

TV, you can operate easily DVD Recorder

& VCR using the TV remote control. (This is

only available with Samsung TVs that support

Anynet+(HDMI-CEC).) (See pages 33~34)

Please check the logo (If your TV has an

logo, then it supports Anynet+ function.)

■

Case 2 : Connecting to a TV with DVI Jack

▌

• Using the DVI Adapter Cable, connect the HDMI OUT

jack on the rear of the DVD Recorder & VCR to the DVI

IN jack of your TV.

• Using the audio cables, connect the AUDIO (red and

white) OUT jacks on the rear of the DVD Recorder &

VCR to the AUDIO (red and white) IN jacks of your TV.

Turn on the DVD Recorder & VCR and TV.

• Press the input selector on your TV remote control until

the DVI signal from the DVD Recorder & VCR appears

on your TV screen.

01293M-VR350,355-XEH-ENG.indb 2001293M-VR350,355-XEH-ENG.indb 20 2007-03-12 오후 12:13:252007-03-12 오후 12:13:25

Stránka sa načítava ...

Samsung DVD-VR350 Používateľská príručka

Táto príručka je tiež vhodná pre

Samsung DVD-VR350 Používateľská príručka

Súvisiace články

Ďalšie dokumenty