Lidl HG00073A Operation and Safety Notes

TEMPERATURSTATION

Bedienungs- und Sicherheitshinweise

BEL- ÉS KÜLTÉRI HŐMÉRŐ

Kezelési és biztonsági utalások

TEMPERATURNA POSTAJA

Navodila za upravljanje in varnostna opozorila

METEOST ANICE

Pokyny pro obsluhu a bezpečnostní pokyny

DIGITÁLNY TEPLOMER

Pokyny pre obsluhu a bezpečnostné pokyny

TEMPERATURE STATION

Operation and Safety Notes

TEMPERATURE STATION

IAN 279818

GB Operation and

Safety Notes Page 5

HU Kezelési és

biztonsági utalások Oldal 26

SI Navodila za upravljanje

in varnostna opozorila Stran 48

CZ Pokyny pro obsluhu a

bezpečnostní pokyny Strana 70

SK Pokyny pre obsluhu a

bezpečnostné pokyny Strana 91

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 113

A

10

13

12

17

25

11

B

28 27

14 9

2

5

15

8

16

241923 22 20 21

26

1

3467 18

D30

C

29

31

33 32

5 GB

Introduction .....................................................Page 6

Proper use ..........................................................Page 6

Description of parts and features ......................Page 6

Technical data ....................................................Page 8

Safety ..................................................................Page 9

General safety information................................Page 9

Safety instructions for batteries .........................Page 10

Before initial use ..........................................Page 11

General information ..........................................Page 11

Preparing to use the outdoor sensor .................Page 12

Preparing the temperature station

for use .................................................................Page 12

Temperature station ...........................................Page 15

External sensor ...................................................Page 15

Setting the language / time zone /

time / date manually ..........................................Page 15

Displaying summer time .....................................Page 17

Calling up the time zone ...................................Page 17

Setting the alarm time ........................................Page 18

Calling up the alarm times ................................Page 18

Switching the alarm on / off ..............................Page 18

Using the snooze button ....................................Page 19

Displaying temperature .....................................Page 20

Calling up the minimum / maximum

values ..................................................................Page 20

Displaying temperature trends ..........................Page 21

Battery state display ..........................................Page 21

Replacing the batteries ......................................Page 21

Troubleshooting ...........................................Page 21

Cleaning and maintenance ...................Page 23

Disposal .............................................................Page 23

Declaration of conformity .....................Page 24

Warranty ..........................................................Page 25

6 GB

Temperature station

Introduction

We congratulate you on the purchase of your

new product. You have chosen a high quality

product. The instructions for use are part of the

product. They contain important information

concerning safety, use and disposal. Before

using the product, please familiarise yourself

with all of the safety information and instruc-

tions for use. Only use the unit as described

and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure

that you also pass on all the documentation

with it.

Proper use

The temperature station displays the indoor

and outdoor temperatures in Celsius (°C) or

Fahrenheit (°F) and their maximum and mini-

mum values. The temperature station also

displays the time in 12 / 24-hour clock modes

and the date. In addition, the temperature sta-

tion has two alarm functions. The device is not

intended for commercial use.

Description of parts

and features

LC display

1 Temperature trend (outdoor temperature)

2 Outdoor temperature

3 symbol (outdoor sensor)

7 GB

4 MAX- / MIN display for indoor

temperature

5 Temperature trend (indoor temperature)

6 Indoor temperature

7 symbol (temperature station)

8 Time

9 ZZ symbol (snooze function)

10 Seconds display

11 symbol

12 Day of the week display

13 Date display (day / month)

14 DST display (summer time)

15 / symbol (Alarm 1 / Alarm 2)

16 2nd time zone (ZONE)

17 MAX- / MIN display (outdoor temperature)

18 Radio signal

Temperature station

19 ZZ / REGISTER button (snooze function /

REGISTER)

20 SELECT button

21 SET / RESET button

22 ALARM button

23 CLOCK button

24 Hanging slot

25 Battery compartment

26 Stand

27 Screw (ø 3 mm)

28 Dowel (ø 7.7 mm)

Outdoor sensor

29 Control LED

30 Hanging slot

8 GB

31 Battery compartment

32 Screw (ø 3 mm)

33 Dowel (ø 7.7 mm)

Technical data

Temperature station:

Temperature

measurement range: 0 – + 50 °C

+32 – +122 °F

Note: If the temperature is ≤0 °C (32 °F),

the LC display shows “LL.L”. If the temperature

is ≥50 °C (122 °F), the LC display shows

“HH.H”.

Temperature interval: 0.1 °C

Radio signal: DCF

Batteries: 2 x AA 1.

5 V

(included)

Outdoor sensor:

Temperature

measurement range: –20 °C – +60 °C

–4 °F – +140 °F

Note: If the temperature is ≤–20 °C

(–4 °F), the LC display shows “LL.L”. If the

temperature is ≥60 °C (140 °F), the LC dis-

play shows “HH.H”.

HF transmission signal: 433 MHz

HF transmission range: max. 30 metres

(in open area)

Batteries: 2 x AA 1.

5 V

(included)

Protection class: IPX4

9 GB

Safety

YOU SHOULD STORE ALL SAFETY INFOR-

MATION AND INSTRUCTIONS IN A SAFE

PLACE IN CASE YOU NEED TO REFER TO

THEM AGAIN IN THE FUTURE!

General safety

information

This appliance can be used by children

aged from 8 years and above and per-

sons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning use

of the appliance in a safe way and under-

stand the hazards involved. Children shall

not play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

Do not expose the device to an extremely

high electromagnetic ﬁeld. This may im-

pair the correct functioning of the device.

Please note that the guarantee does not

cover damage caused by incorrect han-

dling, non-compliance with the operating

instructions or interference with the device

by unauthorised individuals.

10 GB

Safety instructions

for batteries

DANGER TO LIFE!

Batteries can be swallowed, which may

represent a danger to life. If a battery

has been swallowed, medical help is

required immediately.

Remove the batteries from the device if

they are not going to be used for a pro-

longed period.

CAUTION! DANGER OF

EXPLOSION! Never recharge

batteries which are not

rechargeable.

When inserting the batteries, ensure the

correct polarity! This is shown in the bat-

tery compartments.

Remove spent batteries immediately from

the device. There is an increased danger

of leaks!

Keep batteries away from children do not

throw the batteries in the ﬁre, short-circuit

them or take them apart.

Always replace all the batteries at once.

Use batteries of the same type only. Oth-

erwise there is a risk of an explosion.

If the batteries have leaked inside your

device, you should remove them immedi-

ately in order to prevent damage to the

device!

Avoid contact with the skin, eyes and mu-

cous membranes. Any parts of the body

11 GB

coming into contact with battery acid

should be rinsed oﬀ with copious amounts

of water and / or a doctor contacted if

necessary!

Before initial use

Put the batteries first into the outdoor

sensor, then into the temperature

station.

Note: Before initial use, remove the protective

ﬁlm from the device display.

General information

CAUTION! When choosing where to

position the temperature station, make sure

that it is not exposed to direct sunlight, vibra-

tions, dust, heat, cold or moisture. Do not place

the temperature station or external sensor near

to heat sources, e.g. radiators, as this may re-

sult in damage to the instruments.

Place the temperature station on the ac-

companying stand 26 .

Please ensure that neighbouring devices

are not operated at the same frequency

of 433 MHz. Such devices may cause

interference to the radio connection.

Do not place the devices next to or on

metal plates. Otherwise the quality of ra-

dio wave transmission may be reduced.

12 GB

Radio signal (DCF):

The DCF signal (time signal transmitter) is

made up of time pulses transmitted from one

of the highest precision clocks in the world

close to Frankfurt / Main in Germany – it var-

ies by 1 second in 1million years.

In ideal conditions, your temperature station

can pick up this signal over a distance of up

to approx. 1,500 km around Frankfurt / Main.

Preparing to use

the outdoor sensor

Inserting the batteries:

Remove the battery compartment cover

from the back of the outdoor sensor.

Insert two 1.

5 V

batteries (AA) (in-

cluded) into the battery compartment 31 .

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown

in the battery compartment (see. ﬁg D).

The outdoor sensor is now ready for use

and the control LED 29 illuminates brieﬂy.

Close the battery compartment cover.

If this does not work, carry out a restart,

if necessary. To do this, press and keep

pressed the ZZ / REGISTER button 19

(restart the outdoor sensor only).

Preparing the temperature

station for use

Inserting the batteries:

Open the battery compartment 25 on the

back of the temperature station.

13 GB

Insert two 1.5 V batteries (AA) (in-

cluded) into the battery compartment.

Note: Make sure you ﬁt the batteries the

right way round (polarity). This is shown

on the battery compartment (see. ﬁg B).

Close the battery compartment cover.

Connecting the temperature station

with

the outdoor sensor and the DCF

radio signal:

After the batteries have been inserted, the

temperature station attempts to establish a

connection with the outdoor sensor. This pro-

cess can take a few minutes. The symbol 18

ﬂashes. Once the device has successfully con-

nected to the external sensor, the symbol 18

stops ﬂashing and the temperature is shown

in the LC display.

Note: If the temperature station does not

receive the signal from the outdoor sensor

within 3 minutes, the temperature station

automatically starts with the reception of the

radio time signal.

After successful reception of the outdoor sen-

sor signal or after 3 minutes, the temperature

station starts with the reception of the radio

time signal. This process can take up to 5 min-

utes and is indicated in the LC display by the

ﬂashing symbol 11 .

After successful reception of the DCF radio

signal, the symbol is displayed continuously

in the LC display.

14 GB

Note: Do not move the temperature station

while it is receiving the signal. Otherwise this

could interfere with reception.If synchronisation

is not possible when the temperature station

is being ﬁrst set up, try changing the location

(e.g. place the temperature station near to a

window).

Reception may be considerably reduced by

obstructions (e.g. concrete walls) or sources

of interference (e.g. other electrical devices).

If the reception of the radio signal continues

to be interrupted, you can set the time and

date manually (see “Setting the language /

time zone / time / date manually”).

Mounting the temperature station

and / or the outdoor sensor on a wall:

Note: You will require an electric drill and a

crosshead screwdriver for this step.

CAUTION! DANGER TO LIFE, RISK

OF INJURY AND MATERIAL DAMAGE!

Read the operating and safety instructions for

your drill carefully.

DANGER TO LIFE!

Take care that you do not hit electricity, gas

or water lines when you drill into the wall. If

necessary, check with a pipe and cable de-

tector before drilling.

15 GB

Temperature station

Mark the position of the hole (ø approx.

7.7 mm) on the wall.

Drill the hole with an electric drill.

Insert the dowel 28 into the drilled hole.

Using a crosshead screwdriver, screw the

screw 27 into the dowel.

Hang the temperature station by placing

the hanger 24 on the screw.

External sensor

Mark the position of the hole (ø approx.

7.7 mm) on the wall.

Drill the hole with an electric drill.

Insert the dowel 33 into the drilled hole.

Using a crosshead screwdriver, screw the

screw 32 into the dowel.

Hang the external sensor by placing the

hanger 30 on the screw.

Note: Ensure that the external sensor does

not come into contact with water or direct

sunlight. Electronic devices may adversely

aﬀect the wireless signal reception.

Setting the language / time

zone / time / date manually

The reception of DCF radio signal where the

temperature station has been positioned may

become degraded or interrupted. If this hap-

pens you can set the device manually.

1. Press and hold down the CLOCK button

23

for about 3 seconds.

16 GB

2. Press the SET / RESET button 21 to switch

between the 12- and 24-hour clock dis-

play modes.

3. Press the CLOCK button to conﬁrm your

settings. The language option ﬂashes.

Tip: If you press and hold down the SET /

RESET button, you accelerate the process

and reach the desired value more quickly.

This quicker method can also be used for

making the following settings. If during

a period of 30seconds no buttons are

pressed, the LC display returns automati-

cally to the default display.

4. Press the SET / RESET button to set the

desired language (GE = German,

FR = French, SP = Spanish, IT = Italian,

EN = English).

5. Press the CLOCK button to conﬁrm your

settings. The time zone display ﬂashes.

6. Press the SET / RESET button to set the

desired time zone for time zone 2 (–12

hours to +12hours).

Note: Should you be in a country in

which the DCF signal can be received but

the time is diﬀerent to your current local

time, you can use the time zone setting to

have the clock display your current local

time. If you ﬁnd yourself in a country in

which, for example, the local time is an

hour ahead of Central European Time

(CET), you set the time zone to +01. The

clock is now still controlled by DCF but

shows the time as one hour ahead of

17 GB

CET. If you wish to know what the time is

in the USA for example, then simply by

setting the time zone value to e.g. –10

you will obtain the current local time in

Los Angeles etc.

7. Press the CLOCK button to conﬁrm your

settings. The hour display ﬂashes.

8. Press the SET / RESET button to set the

desired value.

9. Press the CLOCK button to conﬁrm your

settings.

10. Repeat steps 6 and 7 to set the values for,

minutes, seconds 10 , year and date 13

(day / month).

Note: The seconds display can only be

reset to 00.

11. After this, the LC display returns to the de-

fault display.

Displaying summer time

Summer time is indicated by the DST symbol 14

in

the LC display. The temperature station

au-

tomatically detects from the DCF radio signal

whether it is summer time or not.

Calling up the time zone

The default display shows the time zone ac-

cording to the information provided by the

DCF signal.

Press the CLOCK button 23 . The time

zone 16 appears in the LC display.

18 GB

Press the CLOCK button again to return

to the default display.

Setting the alarm time

You can set two diﬀerent alarm times.

1. Press and hold down the ALARM button

22 for about 3 seconds.

Note: If an alarm time has been set be-

fore, then that previously set alarm time

appears in the LC display. If not, then the

display shows 0:00 or AM 12:00.

2. The hour display ﬂashes. Press the SET /

RESET button 21 to set the desired value.

3. Press the ALARM button to conﬁrm your

settings. The minute display ﬂashes.

4. Press the SET / RESET button to set the

desired value.

5. Press the ALARM button to conﬁrm your

settings.

6. Repeat steps 2 to 5 to set the time for

Alarm 2.

Calling up the alarm times

Press ALARM button 22 once or twice to

call up the set time for Alarm 1 or Alarm

2 respectively.

Press the ALARM button again to return

to the default display.

Switching the alarm on / oﬀ

Press the SET / RESET button 21 once to

activate Alarm 1. Press the SET / RESET

19 GB

button twice to activate Alarm 2. Press the

SET / RESET button three times to activate

Alarm1 and Alarm 2.

Note: The symbol or appears in the

LC display.

The alarm signal sounds as soon as the set

alarm time is reached. The alarm signal

ceases automatically after a period of

2minutes.

Press the SELECT 20 / SET / RESET 21 /

ALARM 22 / CLOCK button 23 to switch

oﬀ the alarm signal before it switches oﬀ

automatically.

Note: The alarm signal sounds every

day at the set time.

Press the SET / RESET button three times

to deactivate Alarm 1. Press the SET /

RESET button twice to deactivate Alarm

2. Press the SET / RESET button once to

deactivate Alarm 1 and Alarm 2.

Using the snooze button

Press the ZZ/ REGISTER button 19 while

the alarm signal is sounding to activate

the snooze function.

The alarm signal is silenced and the

displays or and ZZ ﬂash.

The alarm signal sounds again after

approx. 5 minutes.

Press the SELECT button 20 to deactivate

the snooze function.

20 GB

Displaying temperature

The LC display shows the indoor temperature

6 and the outdoor temperature 2.

Press and hold down the SELECT button

20 for approx. 3 seconds. The °C dis-

play ﬂashes.

Press the SET / RESET button 21 to switch

between the °C (Celsius) and °F (Fahr-

enheit) temperature scales.

Press the SELECT button to conﬁrm your

settings.

Calling up the minimum /

maximum values

The temperature station stores the maximum

and minimum values of the outdoor sensor

and of the temperature station itself.

Press the SELECT button 20 to display the

maximum values of the indoor and out-

door temperature.

Press the SELECT button again to display

the minimum values of the indoor and

outdoor temperature.

Press the SET / RESET button 21 while the

maximum and minimum values, are being

displayed to reset the values.

Press the SELECT button, to return to the

default display.

Stránka sa načítava ...

Lidl HG00073A Operation and Safety Notes

Lidl HG00073A Operation and Safety Notes

V iných jazykoch

Ďalšie dokumenty