Prestigio GeoVision 5800 Návod na obsluhu

CAUTION

1. To reduce the risk of electric shock, do not remove the cover (or back). No

user-serviceable parts inside. Refer servicing to qualified service personnel.

2. The manufacturer should not hold responsibility for the damage caused by any

substitutions and modifications of the product without authorization from the

manufacturer or authorized unit

.

WARNING

The device should not be exposed to dripping or splashing and no objects filled with

liquids should be placed on the device.

Important Safety

Instructions

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Prestigio GeoVision 5800BTHDDVR–Accessories List

ITEM NAME QTY

Car Charger 1

USB Cable 1

Car Mount 1

Stylus Pen 1

User Manual 1

Warranty Card 1

Driver/Document CD 1

Accessories

EN

EN - 1

Prestigio GeoVision 5800BTHDDVR

Front and Side View

1. LCD Touch Screen

Tap the screen with touch pen or finger to select menu commands or to enter

information.

2. Battery Status Indicator

The indicator glows in bright green color when battery is fully charged and in red

color when charging.

3. Earphone Jack

Connects to earphones or headsets.

4. microSD Slot

Receiving micro SD memory card for data access or memory expansion.

5. Video-IN Jack

6. mini USB Port

Connection to USB Cable for data access or battery charging

7. Microphone

Records sound

View of Main Unit

1

4

3

6

2

EN

5

7

EN - 2

Prestigio GeoVision 5800BTHDDVR

Rear and Top View

1. Speaker

Emits sound, voice or music.

2. Reset Button

Press to reboot the device.

3. T-flash slot for DVR

Receiving micro SD card for recording video

4. Power Button

Press to power the device ON/OFF.

5. Lock Button

Press to lock the current video

View of Main Unit

1

4

2

3

5

Inserting microSD Card

z To insert a microSD card, place the

connector towards the device and the

card label towards the front side of

the device.

z To remove a microSD card, gently

press the edge of the card to release

the safety lock and pull the card out

of the slot.

NOTE:

Please always make sure that no application is accessing the microSD

card before extraction.

Connecting to External USB Device

(Charging)

z Insert the USB connector into the

appropriate USB port.

z Insert the other USB connector into

the USB port on PC to start charging.

Device Connections

Connecting to Car Charger

z Insert the USB connector into the

appropriate USB port.

z Insert car charger connector into

vehicle 12V accessory/cigarette

socket to start charging.

NOTE:

Please connect the car charger to vehicle 12V accessory/cigarette

socket after the vehicle engine is started to protect the device from

sudden surges in current.

Device Connections

EN

EN - 3

About Rechargeable Battery

The device is equipped with a built-in rechargeable battery. Please fully charge the

battery (for at least 5 hours) before initial use. The battery status indicator glows in red

color when charging and turns bright green color when charging is complete. Charging

time is approximately 4 hours.

Working conditions and precautions for the rechargeable battery

z Devices with new batteries should be fully charged before initial use.

z It is not necessary to start charging the device before the battery is fully

discharged.

Cautions on Battery

Charging

EN

EN - 4

1. Press and hold Power Button to turn

on the device.

2. Shortly after the greeting screen is

shown, the main menu will be

displayed.

3. Tap the corresponding buttons with

touch pen included to navigate

through various functions.

4. Press and hold Power Button to turn

the device off or to allow the device to

enter sleep mode.

5. Tap Sleep icon to put the device to

sleep mode or Power Off icon to turn

the device off.

Getting Started

z In the main menu, tap on to

enter the device settings.

z Tap to display other settings.

Volume

Adjust sound volume, mute device, or enable warning messages.

Backlight

Adjust the brightness of touch screen, enable/disable auto

backlight.

Language Select desired language.

DateTime Set up Time Zone/Date/Time.

Calibration Calibrate the screen when position deviation occurs.

FM transmitter Transmit audio signals from the navigator to radio sets.

USB

Set the data transmission mode(Active sync or Mass Storage)

between the navigator and computer.

Factory Reset Restore all system settings to its factory default values.

Device Settings

1. Tap on DVR icon on the main menu

to start using DVR function.

2. Tap on to start or stop video

recording ; Tap on to play the

recorded video; Tap on to lock

the recording video.

3. Tap on to format the TF card &

start-up method of video; Tap on

to exit the DVR function.

4. Tap on to enter the setting

interface as left picture; Tap on

and , the device will run the

DVR function automatically when

power on; Tap on and ,

the IR lights will be running

automatically during the dark; Tap on

to exit the setting interface.

5. Tap on to enter the playback

interface as left picture.

6. Tap on to play the previous

video; Tap on to pause or

continue playing; Tap on to

stop playing the current video; Tap

on to play the next video of

previous videos; Tap on to

lock&unlock current video; Tap on

to return the DVR main interface.

(Note: For DVR, it’s a must to use TF card with Class4 at least)

DVR Function

EN

EN - 5

The ADR player will be automatically generated after TF format. The file

will be shown on the screen once open the TF card by computer. Click ADR Player, the

interface will be as below: (Note: for more detailed info about ADR player, please refer to

CD)

①

Video Display Area: Display the current playing video

②

GPS Information Display Area: Display the GPS information of the current

video including GPS coordinates and driving speed

③

Map Display Area: When ADR Player has connected to Google Map via

network and the current playing video has GPS information record, the area

will display the drive route

④ G-Sensor Display Area: Display G-Sensor information.

⑤

Progress Slider Bar: Show the progress of playing video and end user can

drag mouse to any desired location on slider bar for playing video

⑥

Video Group List: Display all video groups in the SD Card; Video group is a

combination of continuous video clips.

⑦

Video Clip List: Display all video clips in the SD Card; ADR Player lists videos

in clips

z Select a video group and press

save video button, the interface

will be as left figure; Check the

checkbox you want on the clip IDs

or check “ Save All” checkbox and

press” Save File” button to export

and save video clips to AVI files.

ADR player of DVR

EN

EN - 6

1. Tap on Bluetooth icon on

the main menu to start using

Bluetooth function.

2. The link status is shown at the

bottom of the interface.

3. Tap on to exit the current

function.

4. Tap on in Bluetooth

interface to start pairing with mobile

phone device with GPRS function.

5. Please make sure Bluetooth

function on mobile phone is

detectable by other devices.

6. “Connected established” will be

displayed upon the successful

pairing.

7. Tap on in Bluetooth

interface to enter the Phone

Keyboard.

8. Tap on digit buttons and tap on

/ / to start Dialing,

Backspace, and enter Dial Record.

Bluetooth Function

9. Tap on / to adjust the

volume. Tap on to end call.

10. Tap on to enter call record.

Tap on to enter keypad. Tap on

to switch the call to mobile

phone or switch it back to device.

11. The call fails to connect as

illustrated.

12. Tap on to return to Phone

Keyboard interface.

13. Calling number will be displayed

upon the Incoming Call.

Bluetooth Function

14. Tap icon on Bluetooth

interface to enter Dial Record.

15. Tap on / / icons to view

Dialed Call list, Received Call list,

and Missed Call list. Tap on to

start dialing.

16. To delete a desired phone

number in the list, select the number

and tap on . Tap on to

delete all numbers in the list.

17. Tap on in the Bluetooth

interface to redial the last dialed

number.

18. Tap on in the Bluetooth

interface to enter Setting function.

19. Tap on to set a new PIN

code. Tap on / to select a

ring tone.

20. Tap on to enable/disable the

Bluetooth function. Tap on to

enable/disable automatic HFP

connection.

Bluetooth Function

EN

EN - 7

21. Tap on in Bluetooth

interface to enter Paired Device List

function.

22. Tap on to delete mobile

phone name from the list. Tap on

to disconnect the PND

(Personal Navigation Device) from

the mobile phone. Select mobile

phone name from Paired Device

List and tap on to enter Profile

list.

23. Tap on to re-connect from

previously connected mobile phone.

Tap on to disconnect the PND

(Personal Navigation Device) from

the mobile phone.

24. Tap on in Bluetooth

interface to start searching process.

25. Pairing devices(mobile phones)

will be displayed in the list when

search is completed.

26. Tap on the mobile phone name

and tap on to pair. Tap on

to enter Paired Device List.

Bluetooth Function

EN

EN - 8

27. Tap on to enter Phonebook.

28. Tap on to download the

phone numbers of the mobile phone

to the PND (Personal Navigation

Device).

29. Tap on to dial the phone

number.

30. Tap on to delete mobile

phone name from the list.

1. Tap on Function icon on the main

menu.

2. Tap on FM icon to start using

Bluetooth function.

3. Tap on / or drag the cursor to

tune FM frequency down/up.

4. Tap on to save current FM

station.

5. Tap on to enable the FM

function.

6. Tap on to exit.

（Note: Please make sure GPS is connected to the car charger before using FM

Transmitter）

Bluetooth Function

FM Function

When using the navigation software for the first time, an initial setup process starts

automatically. Do as follows:

Select the program language. If your preferred language does not appear on the

screen, tap

/ or drag the list up or down with your finger to view all available

languages. Tap

to select your preferred language. Tap to

confirm your selection, and proceed to the next page.

Read the Software and Database End User Licence Agreement, and tap

if you agree with the terms of use.

The Configuration wizard starts in the selected language. Tap to

continue.

Select the voice guidance language profile. If your preferred language does not

appear on the screen, scroll the list for other available profiles. Tap any item in the list for

a short voice sample. Tap

to confirm your selection, and proceed to the next

page.

Initialization and

Software Activation

Set your preferred time format and units. Tap to confirm your

preferences.

Set your preferred route planning options. Tap to confirm your

preferences.

You are offered to watch the tutorial that leads you through the basic steps of

navigation. Tap

if you would like to get an instant understanding of the

functions of your software. You can run it later if you choose

.

You are now asked whether you allow the software to collect usage information and

GPS logs that may be used for improving the application and the quality and coverage of

maps. Tap

to allow the anonymous statistics or to disable this

function.

The initial setup is now complete. The application starts.

Initialization and

Software Activation

EN

EN – 9

Introduction

After the initial setup, and whenever the software is started, the Navigation menu

appears. You have the following options:

• Tap to select your destination by entering an address or selecting

a place of interest, a location on the map or one of your Favourite destinations.

You can also look up your recent destinations from the Smart History, enter a

coordinate or use the location saved in a photo.

• Tap to display the route parameters. You can view the route in its

full length on the map. You can also perform route-related actions such as

editing or cancelling your route, setting a start point for the route, picking route

alternatives, avoiding parts of the route, simulating navigation or adding the

destination to your Favourites.

• Tap to customize the way the navigation software works, watch the

Tutorial, simulate demo routes, or to run some additional applications.

• Tap to start navigating on the map.

• Tap to stop navigation and exit the software.

Navigation

EN

EN – 10

Destination Menu

In the Navigation menu, tap

. The Find menu provides you with the following

options:

• Tap to specify an address as your destination.

• Tap to select a place of interest as your destination.

• Tap to navigate to a location selected on the map.

• Tap to choose from the list of your favourite destinations.

• Tap or to navigate to the recent destination that is shown on the

button.

• Tap to choose from the list of all recent destinations.

• Tap to navigate to a coordinate or to a location saved in a photo.

Navigation

Navigating to An Address

In the Navigation menu, tap

, then tap . By default, the screen

proposes the city or town where you are located.

If needed, change the country. Tap the button showing the name of the country.

1. Use the keyboard to enter the name of the country.

2. After entering a couple of characters, the list of countries that match the entered

string appears. Tap the country of your choice.

If needed, change the city/town. Tap the button showing the name of the city/town,

and use the keyboard to enter a part of its name. As you enter letters, the most likely

city/town name is always shown in the input field. You have the following options:

• Tap to select the city/town that is offered in the input field.

• Tap to correct your entry.

• Tap to browse the list of city/town names matching your input.

Select a city/town from the list.

Navigation

Navigating to An Address

Enter the street name:

1. Tap .

2. Use the keyboard to enter a part of the street name.

3. Tap to select the street that is offered in the input field or tap

to browse the list of all streets matching your input. Select a street from the list.

Enter the house number:

1. Tap .

2. Use the keyboard to enter the house number.

3. Tap to finish entering the address.

The map appears with the selected destination in the middle. Tap another map

location if necessary, then tap

to confirm the destination.

After a short summary of the route parameters, the map appears showing the entire

route. Wait for a few seconds or tap

and start navigating.

Navigation

EN

EN – 11

Navigating to a Place of Interest (POI)

On the Map screen, tap

to return to the Navigation menu. In the Navigation

menu, tap

, then tap . You are offered the following preset search

categories:

• Tap to get a list of petrol stations along the route or if it is

not available, around your current position or your last known position.

• Tap to get a list of parking lots near the destination or if it

is not available, around your current position or your last known position.

• Tap to get a list of restaurants along the route, around

your current position or your last known position.

• Tap to get a list of accommodation near the destination,

around your current position or your last known position.

You can also tap

and search for a place by entering its name.

Navigation

EN – 12

EN

Navigating to a Place of Interest (POI)

If none of the above is appropriate, tap to find a place of interest at the following

locations:

• Tap to search around the current position or if it is not available,

around the last know position.

• Tap to search for a place within a selected city or town.

• Tap to search for a place around the destination of the active

route.

• Tap to search along the active route, and not around a given point.

This is useful when you search for a later stopover that results in a minimal

detour only, such as searching for upcoming petrol stations or restaurants.

Navigation

Example for Navigating to a Place of Interest

Example: To find a park around your destination, do as follows (starting from the

Navigation menu):

Tap .

The list of place categories appears. Tap or slide your finger to browse the list,

and tap

.

Tap to browse the whole category, or tap to narrow

down your search.

Tap any of the list items.

Check the details and the location of the place, and then tap .

After a short summary of the route parameters, the map appears showing the entire

route. Wait for a few seconds or tap

and start navigating.

Navigation

The Map screen is the most important and frequently used screen of the software. The

Vehimarker (a blue arrow by default) represents your current position, and the orange

line shows the recommended route. There are screen buttons and data fields on the

screen to help you navigate. During navigation, the screen shows route information.

• At the top of the screen, you see your heading and the house numbers on left and

right if you have not selected a route destination. When navigating a route, you see

the next manoeuvre and the next street/road on your route. Tap either of them to

open the route itinerary.

• Tap to open the Quick menu with a selection of functions that are useful

during navigation.

• Tap the map anywhere to explore the map around your current position. Additional

map control buttons appear.

• Tap to open three data fields on the map. Tap any of them to

suppress the others. The default values (you can change them in Map settings):

• the remaining distance to the destination,

• the estimated time of the arrival at the destination, and

• the remaining time of the trip.

• Tap to return to the Navigation menu.

More Menu

EN

EN -13

The 'More' menu provides you with various options and additional applications. In the

Navigation menu, tap

.

• : Fine-tune route planning options, change the look of the Map screen,

turn on or off warnings, or restart the Configuration wizard, etc.

• : Visit www.naviextras.com to get additional content, such as new maps or

3D landmarks and useful applications.

• : Access multimedia applications: the Picture Viewer or the Music Player.

• : Access travel applications: the unit converter, the clothing size converter

or country information.

• : Access other useful applications: the calculator, the fuel and maintenance

monitor, sunrise and sunset information or the trip and track log monitor.

• : Read the Tutorial to get instant understanding of the functions of your

software, or run the Demo to watch sample route simulations to see how

navigation works.

More Screen

EN -14

EN

In the Navigation menu, tap

, then tap . The Settings menu provides

you with the following options (scroll the list to see all):

• : Adjust the different sound volumes, change the voice guidance

profile, or enable and set up warnings.

• : Change the function buttons in the Quick menu of the Map screen.

• : Before selecting one of the Lorry profiles as the Vehicle type used

in route calculation, set up the editable lorry attribute profile with the parameters

of your lorry. These parameters will be used in route calculation.

• : You can turn Smart Routes on or off, select whether to take traffic

events into consideration when calculating the route or you can change the

radio station.

• : Select the type of vehicle you are driving, the road types used in

route planning, and the route planning method.

• : These settings determine how Green routes will be calculated.

Settings

They are also used to display the cost and CO

2

emission of routes.

• : Adjust map related settings: change the daytime and night colour

schemes, change the default zoom level, switch between 2D and 3D map,

suppress buildings or change the Vehimarker.

• : Change the values of the data fields on the Map screen, show or

suppress junction views and signpost or display a route progress bar on the left

of the map.

• : Turn the menu animations on or off, select a different skin for the

application, adjust the display backlight.

• : Change the program language, the time format and units or the

time zone.

• : Turn the automatic trip or track log saving on or off, check the

current size of the trip database.

• : The application collects usage information and GPS logs that may

be used for improving the application and the quality and coverage of maps.

Here you can enable or disable collecting these logs.

• : Modify the basic software parameters set during the initial setup

process.

• : Delete all saved data and reset all settings to their factory defaults.

Settings

Take steps described in the tables below to solve simple problems before contacting

customer service.

NOTE:

Immediately turn off the device and disconnect the power adapter if the

device is not working properly. Never try to repair the unit without

authorized professionals for it may damage the unit.

Troubleshooting

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

There is no

sound.

The volume may be turned

down or mute.

Turn up the volume or turn

on the sound output.

Users cannot

turn on the unit.

The adaptor is not

connected well.

Connect the adaptor

correctly.

The built-in rechargeable

battery is weak.

Use the adaptor to supply

power or charge the

battery.

There is no

picture.

The brightness may be

turned down.

Adjust the brightness of the

LCD.

The unit cannot

receive satellite

signals or cannot

orient.

The unit work may be

obstructed by buildings or

metal blocks.

Make sure to use the unit

outdoors; if in vehicle, you

can use the external GPS

antenna to solve this

problem.

EN

EN – 15

Troubleshooting

EN

EN – 16

Irregularity or

instability in

signal receiving.

The built-in rechargeable

battery is weak.

Use the adaptor to supply

power or charge the

battery.

The unit may be obstructed

by material, such as heat

insulation paper.

Remove the material.

The movement of the unit is

too strong.

Avoid any movement of the

unit.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

MODEL GV5800BTHDDVR

Navigation Software IGO Primo

GPS Chipset SiRF Atlas V, 664MHz

DVR 120 degrees/720P/1.0 MP/IR Light/30FPS

Antenna Internal

Interface USB

Display size 5"

Resolution 800*480

Display type TFT, Touch screen

RAM 128MB, DDR2

Flash 4GB, MLC

Expansion slot Micro SD-Card slot, max 8GB

Battery type/capacity Li-poly/1000mAh

Operating system Windows CE .NET 6.0

Speaker Built-in, 1W

V

ideo formats supported MPEG4,WMV, AVI,

A

SF,MP4,

MPG,3GP （not support RM,RMB)

A

udio formats supported WMA, MP3,WAV,M4A,OGG, AAC

Earphone jack 3.5mm

Operating Temperature 0C ~ +50ºC

Operating humidity 10% to 90% non-condensing

Technical Specifications

ВНИМАНИЕ

1. За да намалите риска от от електрически удар, не махайте задния капак.

Вътре няма части, които да се поправят от потребителя. Поверете

обслужването на квалифициран сервизен персонал.

2. Производителят не носи отговорност за повреди, причинени от замени и

модификации на продукта без оторизация от производителя или оторизирана

фирма

.

ПРЕДУПРЕЖДЕНИЕ

Устройството не трябва да бъде излагано на оплискване или окапване с течности.

Върху него не трябва да се поставят съдове пълни с течности.

Важни инструкции

за безопасност

Възклицателният знак в равностранен триъгълник е с цел да

предупреди потребителя за важни инструкции за работа и обслужване в

литературата придружаваща устройството.

Prestigio GeoVision 5800BTHDDVR –

списък с аксесоари

АКСЕСОАР ИМЕ КОЛИЧЕСТВО

Зарядно за кола 1

USB кабел 1

Стойка за монтаж в кола 1

Стилус (писалка) 1

Ръководство на

потребителя

1

Гаранционна карта 1

CD с

драйвери/документация

1

Аксесоари

BG

BG - 1

Prestigio GeoVision 5800BTHDDVR

Изглед отпред и отстрани

1. Чувствителен на допир LCD екран

Докоснете екрана с писалката или с пръст, за да изберете команди от менюто,

или за да въведете информация.

2. Индокатор за статуса на батерията

Индикаторът свети светлозелено, когато батерията е заредена докрай, и

червено, когато се зарежда.

3. Вход за слушалки

За свързване на слушалки.

4. Слот за microSD карти

За поставяне на microSD карта памет за разширение на паметта.

5. Video-IN вход

6. mini USB порт

За свързване на USB кабел за зареждане на батерията или достъп до данни

7. Микрофон

За запис на звук

Изглед на

у

ст

р

ойството

1

4

3

6

2

BG

5

7

BG - 2

Prestigio GeoVision 5800BTHDDVR

Изглед отзад и отгоре

1. Високоговорител

За извеждане на звук – глас или музика.

2. Бутон Ресет

Натиснете, ако искате да рестартирате устройството.

3. Слот за microSD карти за DVR

За поставяне на microSD карта памет за запис на видео

4. Бутон Захранване

Натиснете, за да включите/изключите устройството.

5. Бутон Заключване

Натиснете, за да заключите текущото видео

Изглед на

у

ст

р

ойството

1

4

2

3

5

Поставяне на microSD карта

z За да поставите micro SD карта,

ориентирайте конектора към

устройството с надпис към екрана.

z За да извадите microSD картата,

внимателно натиснете края на

картата, за да освободите

ключалката и извадите картата от

слота.

ЗАБЕЛЕЖКА:

Моля, преди изваждане се уверете, че никое приложение не работи

с micro SD картата.

Свързване на външно USB устройство

(зареждане)

z Свържете mini USB конектора на

кабела към mini USB порта на

устройството.

z Свържете другия USB конектор на

кабела към свободен USB порт на

РС, за да започнете зареждането.

Свързване на

у

ст

р

ойството

Свързване към зарядно за кола

z Свържете mini USB конектора на

кабела към mini USB порта на

устройството.

z Insert car charger connector into

vehicle 12V accessory/cigarette

socket to start charging.

ЗАБЕЛЕЖКА:

Моля, свържете зарядното за кола към 12V гнездо за запалка на

колата след като стартирате двигателя, за да защитите устройството

от токови пикове.

Свързване на

у

ст

р

ойството

BG

BG - 3

За акумулаторната батерия

Устройството е снабдено с вградена презареждаема (акумулаторна) батерия. Моля,

заредете докрай батерията (поне 5 часа) преди първоначална употреба.

Индикаторът за статус на батерията свети в червено по време на зареждане и в

светло зелено, когато зареждането завърши. Времето за зареждане е около 4 часа.

Условия за работа и предпазни мерки за акумулаторната

батерия

z Нова батерия за устройството трябва да бъде заредена докрай преди

първоначална употреба.

z Не е необходимо да зареждате батерията, ако не е докрай разредена.

Внимание при

зареждане

BG

BG - 4

1. Натиснете и задръжте Бутон

Захранване, за да включите

устройството.

2. Малко след началния

поздравителен екран се показва

главното меню.

3. Докоснете съотв.бутони с

писалката за навигация в

различните функции.

4. Натиснете и задръжте Бутон

Захранване, за да изключите

устройството, или за да го

поставите в режим „сън”.

5. Докоснете иконата Сън (Sleep) за

да го поставите в режим „Сън”, или

Изкл (Power Off) за да изключите

устройството.

Първи стъпки

Stránka sa načítava ...

Prestigio GeoVision 5800 Návod na obsluhu

Táto príručka je tiež vhodná pre

Prestigio GeoVision 5800 Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty