alza cz SAVA Používateľská príručka

User Manual • Uživatelský manuál • Užívateľský manuál •

Használati utasítás • Benutzerhandbuch

English

1 – 16

Čeština

17 – 32

Slovenčina

33 – 49

Magyar

50 – 66

Deutsch

67 – 83

Product Instruction Manual

Dear users and friends, for the safety of you and others, and to ensure the excellent and stable

performance of the electric bicycle, please read the manual carefully before using this product.

The daily form and maintenance knowledge provided in this manual can help you to be more

familiar with the operation of your bike. Any improper operation may damage your bike. As the

product is constantly improved and updated in technology, there may be no slight difference

between the actual object and the manual, so please take the actual object as the standard.

1

1.Please pay attention:

1. Before riding, please carefully read the Product Instruction Manual and carefully check

whether all parts are in good condition to ensure your riding safety. If you find any problems, please

contact the dealer in time.

2.Please abide by the urban traffic regulations and are not allowed to bring people; In rainy

and snowy days and slippery sections, the speed should be slowed down, and the braking distance

should be increased to ensure safety.

3. This bike can be exposed to rain and snow, but it can't be wading. When the water level

floods the motor hub, it will cause short circuit and damage the electrical appliances of whole bike.

4. The battery used in this bicycle is a safe power supply, but the metal contact of the battery

housing cannot be touched with wet hands at the same time, let alone contact with metal at the

same time, otherwise a large short-circuit current will be generated and an accident will be caused.

5.Please do not disassemble and disassemble the parts by yourself. If you need to replace

them, please purchase standard parts from the general agent of our electric bicycle.

6.For the safety of others, please don't lend your bicycle to someone who can't operate, so

as to protect your bicycle from unnecessary damage.

2.Bicycle Size and Rider Height Matching Form :

Frame Size

Suggested Rider Height

27.5*15”

150CM-165CM

27.5*17”

165CM-175CM

27.5*19”

175CM-190

29*17”

165CM-180CM

29*19”

180CM-195CM

29*21”

195CM-215CM

2

3.Main Technical Parameters of Electric Vehicles

3.1. Motor Parameters

Rear Motor

Bafang Middle Motor

Shengyi Middle Motor

Motor Model

LAX-CK250

MM G520.250.C

CMT03

Rated Power

250W

Rated Voltage

36V

Rate Efficiency

≧80

％

≧80

％

≧80

％

No-load Current

＜

0.9A

＜

1.2A

＜

1.5A

Rated Current

＜

9.5A

＜

9A

＞

15A

No-load Rotation Speed

245±10RPM

105±7RPM

88±10RPM

Rated

Rotation Speed

195±5RPM

94±6RPM

83±10RPM

Rated Torque

＞

12N.M

＞

20N.M

＞

40N.M

Maximum Torque

＞

40N.M

＞

95N.M

＞

80N.M(450W)

Sensor

Speed Sensor

Torque Sensor

Speed Limit

25KM/H

3.2.Battery Parameters

Voltage

Ampere-hour

Watt-hour

Charging Time

36V

20Ah

720Wh

6.5h-7.5h

4.Battery Charging Instructions:

1. When the input and output terminals of the charger are connected, the red indicator light

of the charger will light up, and the green light will light up when fully charged.

2. Standard charging time: charge according to the time specified by the matching charger.

The battery charging time is 6.5-7.5 hours under the ambient temperature 25℃.

3. When charging in summer, the battery charging time should be 6.5-7.5 hours. If the

battery temperature exceeds 40℃, stop charging and continue charging after the temperature

drops. When charging in winter, it should be stored indoors for 1 hour and then charged for 7.5-

8.5 hours.

4. The charger has an over-current protection device, and long-time charging (generally no more

than 24 hours will not affect the life of the battery and charger.

3

5.Battery Charging Precautions

1. When charging, please place it in a safe place where children cannot touch.

2. It should not be used without full charge.

3. Do not use other-brand chargers for charging, and this charger is not suitable for other

types of batteries.

4. The charger contains high voltage circuit, so please do not disassemble it without

authorization. 5. During use and storage, prevent liquid and metal scraps from penetrating into the

charger, and beware of falling and impact, so as not to cause damage.

5. When charging the charger, do not cover anything.

6. This charger is for indoor use. Please use it in a dry and well-ventilated environment.

7. When smell peculiar smell or the temperature is too high during charging, please stop

charging immediately and send it to the distributor for repair.

Please notice there is a charging hole in the frame,

battery can be charged directly in the bike.

You can also take the battery out of the

frame and charge the battery directly .

6.Three kinds of Display Operating Instructions:

Attention: The displays below may not be the display of your bike, please find the corresponding

display of your bike among these three.

4

6.1.Display of Rear-motor Model :

6.1.1.Display Indication :Speed display, power indication, fault indication, total mileage

and single mileage.

6.1.2. control and setting function: Power switch control, wheel diameter setting, idle

automatic sleep time setting. Setting the backlight brightness, setting the start mode,

setting the

drive mode, setting the voltage level and setting the controller's current limit.

6.1.3. Communication Protocol: UART

The full content of the display (full display in the boot 1S)

5

6.1.4 Display Content Introduction

Voltage state level POWER

Multifunction display area

Single mileage DIS and total mileage ODO (unit: mile, KM).

Speed display area

Unit Mp/h, km/h

The speed signal is taken from the Holzer signal in the motor and sent to the instrument by the

controller. (a single Holzer cycle time, unit: 1MS) instrument will calculate the real speed according

to the wheel diameter and signal data (the number of magnetic steel should be set up by the motor

Holzer).

Vehicle support gear adjustment ,there are 1, 2, 3 adjustable ；

Vehicle state display area

:Setup mode；:Current voltage； :Brake cue ；:Motor failure ;

:Malfunction ； :Wheel diameter; :The headlamps；:Controller fault

The instrument is equipped with three, respectively with the symbol key(Alternative text

UP )、key(Alternative text SW )and key(Alternative text DOWN)express.

6.2.Display of Bafang Middle-motor Model

6

6.2.1 Display Indication

7

6.2.2 Switching the System ON/OFF

6.2.3 Selection of Support Levels

6.2.4 Selection Mode:

8

6.2.5 Headlights / backlighting

6.2.6 Walk Assistance

6.2.7 BOOST Function

9

6.3 Display of Shengyi middle-motor Model:

6.3.1Display Indication

10

6.3.2Functional Description

6.3.3 Power On/Off

6.3.4 Assist level operating

6.3.5 Speed mode switch& Mileage mode switch

Walking mode （6km)

11

6.3.6 Data cleanup

7.Handlebar Installation

First remove the four screws of the stem, as

shown in the figure, install the handlebar at the

center point and lock the screws (5.1 Nm)

Adjust the angle of the stem to the position

perpendicular to the frame, first lock the screw

of the stem cover, and then lock the two screws

of the arrow.

12

8.Front Wheel Installation:

Take out the front wheel set and

align it with the clearance of the

front brake before installing it,

then install .

A hollow wheel center shaft

is penetrated by a quick

release rod, one end of which

can adjust the pressure with

a nut, and the other end is

locked with a quick release

wrench.

Check whether there is a gap

on both sides of the disc rotor

after locking.

9.How to Install and take down battery :

The lower end of the battery is

placed against the bump

Press hard on the upper end to

lock the battery

Make sure to lock the battery

and pull out the key

13

Open the lock, push up the

handle with index finger, and

pull down the battery for a

while

Pull the button handle up with

your right hand and pull it down

with your left hand

Remove the battery

10.Before the first ride:

Please fully charge the battery. During charging, the diode on the charger is red. When the battery

is fully charged, the diode on the charger will turn green. At this time, the battery can be used.

Please make sure that your bike can be used and adjusted to your angle. Adjust the position of

saddle and handlebar.

Check the brakes and adjustment

Check the fixing of wheels Check tire pressure

Check whether the battery is installed correctly Modern brake system will be very sensitive, and it

will have different performance than the brakes on your bicycle in the past.

Please try to ride in an open field in advance to familiarize yourself with the braking performance.

Please note that the braking effect will decrease and the braking distance will become longer when

used on wet roads.

Practice operation and cycling in an open and safe place before riding on public roads.

Make sure that the wheels are firmly connected to the frame and front fork.

Check the wheel and shaft core, and all important bolts Under the condition of braking, push the

bicycle forward, and the rear brake should completely lock the movement of the rear wheel, while

the rear wheel will fall off the ground under the braking force of the front brake, and the front

position of the bicycle should not shake or make abnormal noise.

14

Check the air pressure in the tire. The correct tire pressure will be marked on the side of the tire.

Please ensure that the tire pressure is between the minimum and maximum required pressure. If

you can't find any recommended pressure value, 45psi is a suitable pressure for most tires. If the

tire is relatively narrow, 60psi is suitable. As a common rule , you can simply judge with your thumb.

For example, when sitting in the bike, you can check the tire pressure as follows: If you press your

thumb against the tire, the tire will not be easily pressed down by your thumb and change its

shape.

Check tires and rims for damage, cracks or deformation, and embedded particles such as glass or

sharp Stone fragments. If you find any cuts, tears or holes, please don't ride.

11.Before each ride, please check:

• The lamps (if any) can work and be properly fixed

• The brake can work normally and be properly fixed There is no oil leakage in the housing and

accessories of the brake .

• There are no foreign bodies and damages in tires and no deformation in wheels

• The battery is installed correctly and securely

• The tire has enough tread depth

• Tighten all bolts and nuts, and check that all quick-release wrenches are in the correct fixed

position. When not riding, check that all bolts and nuts are stable before use.

• The frame and front fork are not damaged

• Handlebar and stem are connected correctly and fixed properly. And the position is correct.

• Seatpost and saddle are stable and positioned correctly. Try to rotate or toggle up or down, and

the seat cushion should not move at all.

• The frame, front fork and other parts related to safety, such as brakes and wheels, if seriously

worn, will affect the use safety.

•If the service time of spare parts exceeds the expected service life, it may break down

unexpectedly, resulting in falling down and serious injury.

12.Torque Parameters:

Stem 45 in-lbf (5.1 Nm)

Rear derailleur 70-88 in-lbf (8-10 Nm)

Handlebar 45 in-lbf (5.1 Nm)

Rear axle core is 133 in-lbf (15 Nm)

Seatpost clamp 55 in-lbf (6.2 Nm)

Shifter 25-30 in-lbf (2.8-3.4 Nm)

15

Seat tube/seat cushion guide rail 120 in-lbf (13.5 Nm)

Headlamps 26-45 in-lbf (3-5 Nm)

Axis 355-445 in-lbf (40-50 Nm)

Crankshaft bolt 336-363 in-lbf (38-41 Nm)

Screw of water bottle cage 35 in-lbf (4 Nm)

Disc bolt 104 in-lbf (12 Nm)

Kickstand bolt 89 in-lbf (10 Nm)

Screw of disc brake caliper 80 in-lbf (9 Nm)

Screw of disc brake pad 40 in-lbf (4.5 Nm)

Brake lever 22 in-lbf (2.5 Nm)

13.Self-inspection Contents of Regular Maintenance:

1. Whether the front and rear wheel screws are locked.

2. Whether the tread of the outer tire is worn and cracked.

3. Whether the front and rear tire pressures are appropriate.

4. Whether the drive system is smooth.

5. Whether the joints of all parts are normal: whether the brake line zipper is used under

lubrication.

6. If you don't use this bike for a long time, please pay attention to charging it regularly

(usually about two months apart) to maintain your battery.

14.Maintenance and Cleaning Instructions

1. It is forbidden to wash with water to avoid potential accidents caused by soaking of

internal electronic components and circuits.

2. Please use a neutral cleaner, gently wipe the dirt on the surface of paint or plastic parts

with a rag, and then try to clean it with a dry cloth.

3. Please wipe the metal parts of the bike body with lubricating oil for maintenance.

4. It is strictly forbidden to oil the front and rear brakes, wheel steels and tires.

The final interpretation right of all terms and conditions in this manual belongs to SAVA company.

16

Uživatelská příručka

Vážení uživatelé a přátelé, pro bezpečnost vás i ostatních a pro zajištění vynikajícího a stabilního výkonu

elektrického kola si před použitím tohoto produktu pečlivě přečtěte příručku. Denní forma a znalosti

údržby uvedené v této příručce vám mohou pomoci lépe se seznámit s provozem vašeho kola. Jakákoli

nesprávná operace může vaše kolo poškodit. Jelikož je produkt neustále zdokonalován a technologicky

aktualizován, mohou se mezi skutečným objektem a příručkou vyskytovat rozdíly, proto prosím berte

skutečný objekt jako standard.

17

1.Upozornění

1. Před jízdou si prosím pečlivě přečtěte návod k použití produktu a pro zajištění vaší

bezpečnosti při jízdě pečlivě zkontrolujte, zda jsou všechny součásti v dobrém stavu. Pokud

narazíte na nějaké problémy, kontaktujte prosím včas prodejce.

2. Dodržujte prosím pravidla silničního provozu a nepoužívejte prostředek ve více lidech; V

deštivých a zasněžených dnech a na kluzkých úsecích by měla být rychlost zpomalena a měla by

být zvýšena brzdná dráha, aby byla zajištěna bezpečnost.

3. Toto kolo může být vystaveno dešti a sněhu, ale nemůžete se s ním brodit. Když hladina

vody zaplaví náboj motoru, způsobí to zkrat a poškození elektrických spotřebičů celého kola.

4. Baterie použitá v tomto kole je bezpečným zdrojem energie, ale kovové části krytu baterie

se nedotýkejte mokrýma rukama nebo kovem, došlo by ke zkratu, který by mohl způsobit nehodu.

5. Prosím, nerozebírejte díly sami. Pokud je potřebujete vyměnit, prosím, nakupujte

standardní díly od hlavního zástupce našeho elektrického kola.

6. Pro bezpečnost ostatních, prosím, nepůjčujte vaše kolo někomu, kdo s ním neumí

zacházet, a tím i ochráníte vaše kolo před zbytečným poškozením.

2.Tabulka velikosti kola dle výšky jezdce

Velikost rámu

Doporučená výška jezdce

27.5*15”

150CM-165CM

27.5*17”

165CM-175CM

27.5*19”

175CM-190

29*17”

165CM-180CM

29*19”

180CM-195CM

29*21”

195CM-215CM

18

3.Základní technické parametry elektrických prostředků

3.1. Parametry motoru

Zadní Motor

Bafang Střední Motor

Shengyi Střední Motor

Model Motoru

LAX-CK250

MM G520.250.C

CMT03

Jmenovitý výkon

250W

Jmenovité napětí

36V

Jmenovitá účinnost

≧80

％

≧80

％

≧80

％

Proud naprázdno

＜

0.9A

＜

1.2A

＜

1.5A

Jmenovitý proud

＜

9.5A

＜

9A

＞

15A

Rychlost otáčení

naprázdno

245±10RPM

105±7RPM

88±10RPM

Jmenovitá rychlost

otáčení

195±5RPM

94±6RPM

83±10RPM

Jmenovitá síla utažení

＞

12N.M

＞

20N.M

＞

40N.M

Maximální síla utažení

＞

40N.M

＞

95N.M

＞

80N.M(450W)

Senzor

Senzor rychlosti

Senzor točivého

momentu

Senzor točivého momentu

Rychlostní limit

25KM/H

3.2.Parametry baterie

Napětí

Ampérhodina

Watthodina

Doba nabíjení

36V

20Ah

720Wh

6.5h-7.5h

4.Návod pro nabíjení baterie

1. Když jsou připojeny vstupní a výstupní koncovky nabíječky, rozsvítí se červená kontrolka.

Při plném nabití baterie se rozsvítí zelená kontrolka nabíječky.

2. Standardní doba nabíjení: nabíjejte podle času stanoveného odpovídající nabíječkou.

Doba nabíjení baterie je 6,5-7,5 hodiny při okolní teplotě 25 °C.

3. Při nabíjení v létě by měla být doba nabíjení baterie 6.5-7.5 hodiny. Pokud teplota baterie

překročí 40℃, přestaňte nabíjet a pokračujte v nabíjení, jakmile teplota poklesne. Při nabíjení

v zimě by měla být baterie skladována ve vnitřních prostorách po dobu 1 hodiny a poté nabíjena

po dobu 7.5-8.5 hodiny.

4. Nabíječka má nadproudovou ochranu a dlouhodobé nabíjení (obecně ne více než 24 hodin)

neovlivní životnost baterie a nabíječky.

19

Stránka sa načítava ...

alza cz SAVA Používateľská príručka

alza cz SAVA Používateľská príručka

V iných jazykoch

Ďalšie dokumenty