7
GBR
FRA
DEU
NLD
ITA
ESP
PRT
DNK
NOR
SWE
FIN
LT U
LVA
EST
ROU
HUN
BGR
HRV
SVK
CZE
POL
RUS
GRE
TUR
UKR
KAZ
The maximum value of the timer setting - 199:59.
3.
After setting the value until the last symbol and pressing the button the
program will start to count down in 1 second increments. When 00:00 value is
reached an audible signal will be heard.
4. To return to the weighing mode press the
button. To return to the timer mode
press the
button.
5. To disable an audible signal at the end of timer operation press the
button.
Disabling audible signals
To disable audible signals during appliance operation press and hold down the UNIT
button for several seconds. A double audible signal will be heard, after that audible
indication will be disabled. To enable audible signals repress and hold the UNIT button.
When disabling audible signals the notication about the end of the countdown will
be enabled.
III. CLEANING AND MAINTENANCE
Do not use abrasive or solvent-based cleaners, metal sponges, etc. Clean the platform
with a soft damp cloth and wipe dry.
DO NOT immerse the unit in water or wash under running water. The scale is not
dishwasher safe.
It is advised to remove the battery, if the scale is not being in use for a long time. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
I V. BEFORE CONTACTING SERVICE CENTER
Problem Possible cause Solution
The scale does not
work
The scale is not turned on
Switch on the appliance by
pressing the button
The battery is worn out
Replace the battery following
the procedure outlined in “Be-
fore Operating” section
Problem Possible cause Solution
Weight readings are inac-
curate
You selected wrong unit of
measurement
Select the desired unit of meas-
urement
You did not follow the recom-
mended weighing procedure
Always place the scale on a at
and horizontal surface
The unit automatically
turns off
Auto Off feature activated
The scale automatically turns
itself off after use in 5 minutes
The attempt of synchroni-
zation or transferring the
ata from the appliance to
the mobile device failed
Bluetooth function on the
mobile device is disabled
Enable Bluetooth function on the
mobile device
Ready for Sky app on the mo-
bile device is deactivate
Run the Ready for Sky app on the
mobile device
The Kitchen Scales and mobile
device are far away from each
other or there are strays for
the radio signal
Ensure the distance between
devices does not exceed 15
metres and there are no strays
for transmission of radio signal
In case you didn’t manage to eliminate the defects, please, refer to the authorized
service centre.
NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not ob
-
ligatory to apply to the service centre. Apply to REDMOND technical support service and
obtain the consultation of our specialists on error elimination and/or failure in Ready for
Sky operation. Your comments and suggestions concerning application operation will be
taken into account upon successive update. Contact data of user support service of
REDMOND appliances can be found in your country on the website www.redmond.
company. You may also obtain the help, lling the contact form provided on the website.
V. PRODUCT WARRANTY
Create your account on the website and get a free addi-
tional warranty year.
*Standard warranty is 1 year. You will get the second war-
ranty year after creating your account on the website
www.redmond.company/additional_warranty/.
1+1 warranty is available for a limited countries list.