HP DesignJet 4520 Scanner series referenčná príručka

Kategória
Tlač
Typ
referenčná príručka
HP DesignJet Information Engineering
Quick reference guide
HP Designjet T11 MFP /
45 mfp / 45 Tarayıcı
Hızlı başvuru kılavuzu
Skenery
HP Designjet T11
MFP /
45 mfp / 45
Stručná referenční příručka
HP Designjet T11
45 mfp bbfunkciós késk/
45 lapolva
Felhasználói gyorskalauz
MFP /
EN
TR
HU
CS
HP DesignJet Information Engineering
You can nd legal and warranty information on the CD. Further information is available at HP’s support Web
site (http://www.hp.com/go/knowledge_center/).
Legal notices
The information contained herein is subject to change without notice. The only warranties for HP Products and
services are set forth in the express warranty statement accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
CD'de yasal ve garanti ile ilgili bilgiler mevcuttur. Diğer bilgiler HP’nin destek web sitesinde
(http://www.hp.com/go/knowledge_center/) bulunmaktadır.
Yasal bildirimler
Burada yer alan bilgiler önceden bildirilmeden değiştirilebilir. HP ürün ve hizmetleri için yalnızca söz konusu ürün
ve hizmetlere eşlik eden açık garanti belgelerinde belirtilen garantiler geçerlidir. Burada kullanılan hiçbir ifade ek
garanti olarak yorumlanamaz. HP, bu belgedeki teknik hatalardan veya yazım hatalarından ya da eksikliklerden
sorumlu tutulamaz.
Na disku CD naleznete právní ujednání a informace o záruce. Další informace jsou k dispozici
na webu podpory společnosti HP (http://www.hp.com/go/knowledge_center/).
Právní informace
Informace v tomto dokumentu mohou být změněny bez předchozího upozornění. Jediné záruky poskytované
k produktům a službám HP jsou výslovně uvedeny v prohlášení o záruce, které se dodává společně s těmito
produkty a službami. Žádné z informací uvedených v tomto dokumentu nemohou sloužit jako podklad pro
vyvození dalších záruk. Společnost HP nenese odpovědnost za případné technické či redakční chyby ani
opomenutí v tomto dokumentu.
A CD-lemezen jogi tudnivalókat és a jótállással kapcsolatos információkat találhat. További információ
a HP terméktámogatási webhelyén található (http://www.hp.com/go/knowledge_center/).
Jogi kitételek
Az itt található információk előzetes értesítés nélkül megváltozhatnak. A HP termékekre és szolgáltatásokra
vonatkozó garanciákat kizárólag az ilyen termékek és szolgáltatások kifejezett garancianyilatkozatában rögzítettek
szerint vállaljuk. Az itt talált információk semmilyen módon nem tekinthetők további garanciának. A HP nem felelős
az itt található semmilyen technikai vagy szerkesztési hibáért vagy kihagyásért.
EN
TR
HU
CS
Table of contents
1 Introduction
Using this guide .............................................................................................. 1
Introduction ................................................................................... 1
Basic operations ........................................................................... 1
Maintenance ................................................................................. 1
Troubleshooting ............................................................................ 1
Index ............................................................................................. 1
Warnings and Cautions ................................................................ 1
Scanner software ............................................................................................ 1
2 Basic Operations
Add a new printer ............................................................................................ 5
Delete a printer ............................................................................................... 6
Create a new media profile ............................................................................. 6
Set the output quality .................................................................................... 10
Copy-quality settings for scanning and printing .......................... 10
Print-quality settings for printing from a file ................................ 12
Scan-quality settings .................................................................. 13
Copy a document .......................................................................................... 15
Collate copies ............................................................................................... 19
Perform a batch copy .................................................................................... 19
Scan a document to a file ............................................................................. 21
Scan a document to the network .................................................................. 23
Add a network connection .......................................................... 23
Scan to the network .................................................................... 24
Access files in the network folder ............................................... 24
Perform a batch scan .................................................................................... 25
Use the auto-naming feature ...................................................... 25
Scan the documents ................................................................... 25
Print a file ...................................................................................................... 26
Adjust color ................................................................................................... 27
View, move, rename, or delete a file ............................................................ 28
Scan heavyweight paper or cardboard ......................................................... 28
Preview copies .............................................................................................. 31
Zoom all ...................................................................................... 31
Zoom in ...................................................................................... 31
Zoom out .................................................................................... 31
One-to-one pixel viewing ............................................................ 32
Resize paper frame .................................................................... 32
Move tool .................................................................................... 32
Position the paper frame ............................................................ 32
Align left and align right .............................................................. 33
Save files on a CD or DVD ........................................................................... 34
Access the shared folder from my computer ................................................ 34
Accessing the shared folder from Windows XP ......................... 35
Accessing the shared folder from Windows 2000 ...................... 35
HP DesignJet Information Engineering
EN
Accessing the shared folder from Windows 98 .......................... 36
Accessing the shared folder from Mac OS X ............................. 36
Set up a password ........................................................................................ 36
Enable password access to a shared directory ............................................ 38
Connect the scanner to a network ................................................................ 39
Manage an account ...................................................................................... 40
Create an account ...................................................................... 41
Delete an account ...................................................................... 42
Reset an account ....................................................................... 43
Rename an account ................................................................... 44
Set the time, date, and timezone .................................................................. 45
Set sleep and wake-up timers ...................................................................... 46
3 Maintenance
Clean the glass plate and the scanning area ................................................ 47
Calibrate the scanner .................................................................................... 47
Calibrate the touch screen pointer ................................................................ 49
Replace worn parts ....................................................................................... 49
Lamp unit .................................................................................... 50
Air filters ..................................................................................... 50
White-background platen ........................................................... 50
Glass plate ................................................................................. 50
4 Troubleshooting
The Diagnostics light is flashing ................................................................... 52
The Wait light is flashing ............................................................................... 53
The Wait and Diagnostics lights are both flashing ........................................ 53
The Power, Wait, Diagnostics, and Paper-Ready lights are flashing ........... 53
Lines in the scanned image appear too thin or discontinuous ...................... 54
A warning message appears on the panel PC touch screen ........................ 55
The scanner software is in the wrong language ........................................... 55
The scanner software does not start ............................................................ 55
The CD or DVD cannot be read by my computer ......................................... 56
A media profile cannot be generated ............................................................ 56
Streaks in the scanned image ...................................................................... 56
The scanner is not detected after it is power-cycled ..................................... 57
Index ............................................................................................................................... 58
HP DesignJet Information Engineering
1 Introduction
Using this guide
Scanner software
Using this guide
This guide is organized into the following chapters.
Introduction
This chapter provides a brief introduction to the scanner and its documentation for
new users.
Basic operations
This chapter helps you to carry out various common procedures.
Maintenance
This chapter helps you to carry out various calibration and maintenance
procedures.
Troubleshooting
This chapter helps you to solve problems that may occur while scanning.
Index
In addition to the table of contents, there is an alphabetical index to help you to find
topics quickly.
Warnings and Cautions
Symbols are used in this manual to ensure the proper use of the printer and to
prevent printer damage. Follow the instructions that are marked with these symbols.
WARNING! Failure to follow the guidelines that are marked with this symbol could
result in serious personal injury or death.
CAUTION: Failure to follow the guidelines that are marked with this symbol could
result in minor personal injury or damage to the product.
Scanner software
The scanner software is installed in the scanner's touch screen, and runs
automatically when you switch on the touch screen. The first screen that you see
is divided into three main sections:
The viewing section on the left, for viewing scanned images
The control section on the right
The toolbar on the bottom
Using this guide
1
Introduction
HP DesignJet Information Engineering
NOTE: Some details of this screen may vary depending on which printer is
connected to the scanner.
The screen includes:
The preview window. Fills most of the viewing section. Above it is the image
toolbar, with nine buttons that can be used to change the preview (see
Preview
copies on page 31).
The control section. Contains four tabs: Copy, Scan, Print, and Setup. Each
tab provides options that you can select when performing copy, scan, print, or
setup tasks.
Nine larger function buttons at the bottom of the screen:
Quit: shuts down the touch screen
Online help: provides additional information on many topics
not included in this document
File Manager: opens the File Management dialogue box
Print queue: accesses the print queue
Collate: groups copies into sets
Preview: scans the document to preview the image and
select an area of interest
2 Chapter 1 Introduction
Introduction
HP DesignJet Information Engineering
Reset: resets settings to default values
Stop: cancels the current activity
Copy, Scan, or Print: each icon
appears in its respective tab, and initiates the copy, scan, or print function
depending on the tab within which you are working.
Scanner software
3
Introduction
HP DesignJet Information Engineering
2 Basic Operations
Add a new printer
Delete a printer
Create a new media profile
Set the output quality
Copy a document
Collate copies
Perform a batch copy
Scan a document to a file
Scan a document to the network
Perform a batch scan
Print a file
Adjust color
View, move, rename, or delete a file
Scan heavyweight paper or cardboard
Preview copies
Save files on a CD or DVD
Access the shared folder from my computer
Set up a password
Enable password access to a shared directory
Connect the scanner to a network
Manage an account
Set the time, date, and timezone
Set sleep and wake-up timers
4 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
Add a new printer
To add a new HP Designjet printer to the printer list in your scanner software, follow
these steps:
1. Press the Setup tab.
2. Press the Options button. The Options dialog box appears:
3. Press the System button. The System options dialog box appears:
4. Press the Install Printer Driver button.
5. Select the printer you want to install.
Add a new printer
5
Basic Operations
HP DesignJet Information Engineering
NOTE: If more than one printer of the same model number is installed on
the system, the name of the second printer added is denoted by “#2”, the third
by “#3”, and so on.
Delete a printer
To delete an HP Designjet printer from the printer list in your scanner software:
1. Press the Setup tab.
2.
Press the Printer button, and then press the Tool button
. The Printer
Setup dialog box appears.
3. Press the Delete button.
Create a new media profile
Before starting the following procedure, make sure that you have color-calibrated
the scanner (see
Calibrate the scanner on page 47) and make sure that the media
profile you intend to create does not already exist in the media profile list.
6 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
NOTE: When using HP Designjet 45XX, 40XX, or T11XX, you can only create
media profiles for paper types that are currently loaded in the printer. These
standard paper types are detected by the system and their names appear in the list
of media profiles. You can then select one of these and create a media profile for
it as described below. You can not change the names of the media profiles with
these printers.
When using Designjet 500, 800, 5X00, or 1000 you can create media profiles with
any name you want. The system prompts you to enter a name for the required
paper.
NOTE: You are required to create a media profile before you can copy and print.
You are also required to have at least one printer connected to the scanner before
you can copy and print. The printer can be connected to the scanner directly through
the panel PC, or through the local area network (LAN).
NOTE: To create a new media profile, you are required to have media loaded into
the printer.
1. Press the Setup tab.
Create a new media profile
7
Basic Operations
HP DesignJet Information Engineering
2.
Press the Media Profile button, and then press the Tool button
.
(Alternative path: Printer > Tool > Media Profile).
NOTE: With some printers, a Calibrate RIP feature is available in the dialog
box as the first step. Calibrating the RIP involves configuring the gamma
values of red, green, and blue to ensure a neutral appearance of printed gray
(also referred to as gray balance). Press the Calibrate RIP button and follow
the on-screen instructions to use this feature.
3. Press the button that corresponds to the media that you have loaded in the
printer.
4. Press the OK button when this message appears.
8 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
5. Press the Print Color Sheet button to print a color patch reference sheet.
Some printers print a special test sheet just before printing the color sheet. Do
not use the test sheet—only use the color sheet (shown below).
6. Press the Scan Sheet button to scan the color sheet.
NOTE: Some HP Designjet models require that you enter the media profile
name when the system is connected through the LAN.
7. Load the color sheet into the scanner face down. Align the arrow on the color
sheet with the arrow on the center of the scanner.
8. Press the OK button to initiate the scan.
9. Press the OK button when this message appears.
The media profile is active and visible in the list of available media profiles.
Create a new media profile
9
Basic Operations
HP DesignJet Information Engineering
Use the Delete button to delete media profiles. Only user-created profiles can be
deleted.
Use the Rename button (if available) to rename media profiles.
NOTE: When using HP Designjet 45XX, 40XX, or T11XX, the Rename button is
not available in the dialog box. Use the Validate button to check that the media
profile is valid for your scanner and printer combination.
Set the output quality
This section describes how to set the output quality for your scanner and printer.
Copy-quality settings for scanning and printing
1. Press the Copy tab.
2. Press the Settings button. The Copy Settings dialog box appears:
3. Select Ink Printer Original to improve the quality of your copy or print if the
original that you want to scan has been printed with an inkjet printer.
10 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
4. Press the OK button.
5. Press the Quality button.
6. Define the scan quality and print-quality settings using the Quality dialog box.
Scan quality: Select one of the following scan quality settings:
Scan resolution: Manually set the scan resolution in dots per inch
(dpi).
Auto: The system determines the best scan resolution based on the
print quality (Fast, Normal, or Best) that you select. The resolution
setting (in dpi) is displayed next to the Auto checkbox (200 dpi in
the example above).
Descreen: The scanner scans with the optical resolution and relays
the data to the system. The software then sets the optimal resolution
value.
NOTE: The Descreen setting gives the best results when
scanning raster images (non-vector images, such as .jpeg, .tiff,
and .pdf files), however the scanning speed is reduced.
Turbo: The Turbo setting increases the rate at which the paper is
fed and reduces the amount of scanning data that is captured, which
means the scanning speed increases, but the image quality
decreases. To use the Turbo setting, first manually set the scan
resolution, and then select Turbo.
Set the output quality
11
Basic Operations
HP DesignJet Information Engineering
NOTE: The turbo setting has no effect when the resolution is set
below 300 dpi.
Print quality: Select Fast, Normal, or Best.
NOTE: If you set the scan quality to Auto, the print-quality setting that
you select determines the scan resolution (as described above).
7. Press the OK button.
Print-quality settings for printing from a file
1. Press the Print tab.
2. Press the Settings button. The Print Settings dialog box appears:
3. Select from the following print settings:
Print quality: Press the Print quality button to select a Fast, Normal,
or Best print-quality setting.
Ink printer original: This setting is used to improve the quality of your
copy or print if the original you want to scan has been printed with an
inkjet printer.
12 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
Black ink only: This setting is used to create true- and neutral-graytone
output from graytone image files.
NOTE: The use of this setting can result in output that is more grainy
than graytone output which was created with colored inks.
Optimize for drawing: This setting is recommended for text and
drawings.
NOTE: The use of this setting for documents which contain pictures can
result in reduced image quality.
Max detail: This setting is used for enhancing detailed graphics, such as
maps and certain CAD drawings.
NOTE: The use of this setting for documents which contain pictures can
result in reduced image quality.
4. Press the OK button.
NOTE: The availability of these options depends on the printer model.
Scan-quality settings
1. Press the Scan tab.
Set the output quality
13
Basic Operations
HP DesignJet Information Engineering
2. Press the Scan resolution button. The Quality dialog box appears:
3. Select from the following quality settings:
Scan resolution: Manually set the scan resolution in dots per inch (dpi).
Auto: The system determines the best scan resolution based on the print
quality (Fast, Normal, or Best) that you select. The resolution setting (in
dpi) is displayed next to the Auto checkbox (200 dpi in the example
above).
NOTE: The system determines the scan resolution based on the print-
quality that you select, however the print-quality setting is not actually
used in the scan-to-network process.
Descreen: The scanner scans with the optical resolution and relays the
data to the system. The software then sets the optimal resolution value.
NOTE: The Descreen setting gives the best results when scanning
raster images (non-vector images, such as .jpeg, .tiff, and .pdf files),
however the scanning speed is reduced.
Turbo: The Turbo setting increases the rate at which the paper is fed
and reduces the amount of scanning data that is captured, which means
the scanning speed increases, but the image quality decreases. To use
the Turbo setting, first manually set the scan resolution, and then
select Turbo.
NOTE: The turbo setting has no effect when the resolution is set below
300 dpi.
4. Press the OK button.
14 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
Copy a document
1. If you do not already have a media profile for the paper type you are planning
to use, you must create one. See
Create a new media profile on page 6.
2. Insert your document.
a. Place the document face down with the top edge forward in the scanner
insertion slot. Align the center of the document with the center of the
insertion slot.
b. Slide the document gently into the insertion slot until you feel it pulled into
the starting position.
3. Select color or black-and-white copying.
Your selection determines which type-of-original templates are available in the
following step.
4. Select the type-of-original template.
a. Press the Copy tab.
Copy a document
15
Basic Operations
HP DesignJet Information Engineering
b. Press the Type of original button. The Type of original dialog box
appears:
c. Select a type-of-original template that best describes your current input.
d. If you want to change the settings for any of these options, or want to
create a new option, press the Tool button
. To save the new
configuration, press the New button and enter a name for it.
NOTE: If you change any of the original template settings, the Type of
Original dialog box shows the symbol “*” next to the template name to
denote that changes have been made. For example, changes made to
the CAD template appear in the dialog box as “CAD*”.
5. Select the input size.
a. Press the Copy tab.
16 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280

HP DesignJet 4520 Scanner series referenčná príručka

Kategória
Tlač
Typ
referenčná príručka