Philips MMS 260 Používateľská príručka

Kategória
Doplnkové hudobné zariadenie
Typ
Používateľská príručka

Táto príručka je tiež vhodná pre

Portuguese
1. Ligue o cabo branco ao conector da tomada “Front out” de 3,5
branco
2. Ligue o cabo laranja ao conector “Surround out” de 3,5 laranja
3. Ligue o conector mini Din preto à entrada Din “Control in”
4. Ligue o(s) cabo(s) Line in à fonte de som
5. Ligue a fonte de alimentação à entrada “Power in”
6. Ligue o cabo de alimentação à corrente eléctrica
7. Ligue/desligue o sistema utilizando o botão “Power/volume” no
painel central de satélite
8. Regule o sistema, utilizando a placa de som do PC ou outra fonte
de som.
9. Regule o volume, utilizando o botão “Volume” no painel central de
satélite (7)
10. O nível de subwoofer pode ser regulado com o botão “Bass control”.
Nota:
1. Introduza apenas a ficha na tomada de CA depois de efectuar
todas as ligações.
2. As entradas estão de acordo com os códigos de cor do PC 2002
(verde, preto, laranja)
Slowaskia
1. Zapojte bielo oznaèený kábel do bieleho 3,5mm jack
konektora, oznaèeného Front out.
2. Zapojte oranový kábel do oranového konektora Surround
out.
3. Zapojte èierny mini Din konektor do Din vstupu, oznaèeného
Control in.
4. Zapojte linkový kábel (káble) do zdroja zvuku.
5. Pripojte sieový zdroj do vstupu Power in.
6. Zastrète sieový kábel do sieovej zásuvky.
7. Zapnite/vypnite systém tlaèidlom Power/volume,
umiestneným na centrálnom paneli satelitu.
8. Nalaïte systém pomocou zvukovej karty PC alebo iného zdroja.
9. Nastavte hlasitos pomocou gombíka hlasitos na
centrálnom paneli satelitu (7).
10.Hlasitos subwoofera mono nastavi gombíkom Bass
control.
Poznámka:
1. Nezasúvajte zástrèku do zásuvky, kým nie pripojené
vetky káble.
2. Vstupy zodpovedajú farebnému kódovaniu PC2002 (zelený,
èierny, oranový).
Czech
1. Pøipojte bíle oznaèený kabel do zdíøky Front Out (výstup pøedního
reproduktoru) pro konektor jack3,5.
2. Pøipojte oranovì oznaèený kabel do zdíøky Surround Out (výstup
prostorového reproduktoru) pro konektor jack3,5.
3. Pøipojte èerný minikonektor Din do zdíøky Din Control In (øídící vstup).
4. Pøipojte kabely(y) Line In (linkový vstup) ke zdroji zvuku.
5. Pøipojte zdroj napájení do zdíøky Power In (vstup napájení).
6. Pøipojte napájecí kabel do zásuvky.
7. Stisknutím tlaèítka Power/Volume (napájení/hlasitost) uprostøed
panelu satelitní soustavy zapnìte nebo vypnìte systém.
8. Pomocí poèítaèové zvukové karty nebo jiného zdroje zvuku
systém vylaïte.
9. Pomocí knoflíku Volume (hlasitost) na panelu støedového
satelitního reproduktoru(7) nastavte hlasitost.
10.Pomocí tlaèítka Bass Control (nastavení hloubky) lze nastavit
hlasitost hloubkového reproduktoru.
Poznámka:
1. Napájecí kabel pøipojte do zásuvky a po provedení vech
zapojení.
2. Barevné rozliení vstupù odpovídá kódování PC 2002 (zelená,
èerná, oranová).
Hungary
1. Csatlakoztassa a fehér jelöléssel ellátott kábelt a fehér 3,5 mm-
es Front out csatlakozóba.
2. Csatlakoztassa a narancsszínû jelöléssel ellátott kábelt a
narancssárga 3,5 mm-es Surround out csatlakozóba.
3. Csatlakoztassa a mini DIN-csatlakozót a Control in DIN
bemenetbe.
4. Csatlakoztassa a vonalbementi kábel(eke)t a hangforrásba.
5. Csatlakoztassa a hálózati tápfeszültségkábelt a Power input
bemenetbe.
6. Illessze a tápfeszültség-dugaszt a dugaszoló-aljzatba.
7. A középsõ egységen található Power/volume gomb
segítségével kapcsolja be / ki arendszert.
8. Végezze el a rendszer hangolását PC-hangkártya vagy egyéb
hangforrás segítségével.
9. Állítsa be a hangerõt a középsõ egységen (7) található Volume
gomb segítségével.
10.A mélysugárzót a Bass control gomb segítségével állíthatja
be.
Megjegyzés:
1. Ne illessze a tápfeszültség dugót a változó áramú (AC)
dugaszoló-aljzatba addig, amíg nem végezte el a szükséges
csatlakoztatásokat.
2. A bemenetek jelölése a PC 2002 színkódolásnak (zöld, fekete,
narancssárga) megfelelõen történt.
Turkish
1. Beyazla iþaretlenmiþ kabloyu beyaz Ön çýkýþ (Front out)
3,5 jak konektörüne takýn
2. Turuncuyla iþaretlenmiþ kabloyu Turuncu Surround çýkýþ
(Surround out) 3,5 konektörüne takýn
3. Siyah mini Din konektörünü Kontrol giriþ (Control in) Din
giriþine takýn
4. Hat giriþ (Line in) kablolarýný ses kaynaðýna takýn
5. Güç kaynaðýný Güç giriþ (Power in) giriþine takýn.
6. Güç Kaynaðýný prize takýn
7. Orta uydu paneli üzerindeki Güç/ses (Power/volume)
düðmesini kullanarak sistemi açabilir/kapatabilirsiniz
8. PC ses kartý veya diðer ses kaynaðýný kullanarak sistemi ayarlayýn
9. Sesi orta uydu paneli üzerindeki Ses (Volume) düðmesini
kullanarak ayarlayýn (7)
10. Subwoofer düzeyi Bas kontrol (Bass control) düðmesiyle
ayarlanabilir.
Not:
1. Baðlantýlar tamamlanana kadar fiþi AC prizine takmayýn.
2. Giriþler PC 2002 renk kodlarýný izler (yeþil, siyah, turuncu)
Important notes for users in the U.K.
Mains plugMains plug
Mains plugMains plug
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
11
11
1 Remove fuse cover and fuse.
22
22
2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
33
33
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note:Note:
Note:Note:
Note:
The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plugHow to connect a plug
How to connect a plugHow to connect a plug
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the
colour markings identifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Copyright in the U.K.Copyright in the U.K.
Copyright in the U.K.Copyright in the U.K.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer 's Protection Acts 1958 to 1972.
IMPORTANT SAFETY INSTRUCTIONS - Read before operating equipment
For US/Canada only
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
1. Read these instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Keep these instructions - The safety and operating instructions
should be retained for future reference.
3. Heed all warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow all instructions - All operating and use instructions should
be followed.
5. Do not use this apparatus near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool, etc.
6. Clean only with a damp cloth. The appliance should be cleaned
only as recommended by the manufacturer.
7. Install in accordance with the manufacturers Instructions. Do
not block any of the ventilation openings. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
or placed in a built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings.
8. Do not Install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. Match wide blade of Plug to
wide slot, fully insert. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particulary
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Warning! To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
EL 4562-E004: 99/3
http://www.philips.com/pcstuff
Deutschland
Hiermit wird bescheinigt, daß dieses Gerät in Übereinstimmung mit
den Bestimmungen der Amtsblattverfügung 1046/1984 funkentstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes
angezeigt und die Berechtigung zur Überprüfung der Serie auf
Einhaltung der Bestimmungen eingeräumt.
NorNor
NorNor
Nor
gege
gege
ge
Typeskilt finnes på apparatens underside.
Observer:Observer:
Observer:Observer:
Observer:
Nettbryteren er sekundert innkoplet. Den innebygde netdelen
er derfor ikke frakoplet nettet lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
AC
Polarized Plug
The socket-outlet shall be installed near the equipment and shall be easily accessible.
4399 294 61539_Rev1
Multimedia SpeakMultimedia Speak
Multimedia SpeakMultimedia Speak
Multimedia Speak
er Systemer System
er Systemer System
er System
MMS 260MMS 260
MMS 260MMS 260
MMS 260
~ EXPLANATION ~
POWER ON/OFF & ROTARY VOLUME CONTROL
TO SWITCH ON/OFF POWER (BLUE LED INDICATES THAT THE POWER
IS
ON) AND TO ADJUST THE VOLUME HIGHER OR LOWER.
B
ASS CONTROL
TO ADJUST BASS LEVEL TO DESIRED VOLUME
CONTROLS IN
PLUG IN THE MINI DIN CONNECTOR
SURROUND OUT
TO CONNECT BOTH SURROUND LEFT AND RIGHT SATELLITE SPEAKERS
FRONT OUT
TO CONNECT BOTH FRONT LEFT AND RIGHT SATELLITE SPEAKERS
POWER IN
TO CONNECT THE ADAPTER
Installation
English
1. Connect white marked cable to white FRONT OUT 3.5 jack
connector.
2. Connect yellow marked cable to Yellow Surround Out 3.5
connector.
3. Connect black mini Din connector to C
ONTROLS IN Din input.
4. Connect Line In cable(s) to sound source.
5. Connect Power supply to P
OWER IN input.
6. Plug power supply into mains plug.
7. Switch On/Off the system by using the P
OWER/VOLUME knob on
the center satellite panel.
8. Tune system, using PC sound card or other sound source.
9. Tune volume, using volume knob on the center satellite panel.
10. Subwoofer level can be tuned on B
ASS CONTROL knob.
Note:
1. Do not insert the power plug into AC outlet until all connections
are made.
2. Inputs are following PC 2002 colour coding (green, black,
orange).
Swedish
1. Anslut den vitmärkta kabeln till den vita 3,5-anslutningen
Front out
2. Anslut den orangemärkta kabeln till den orangefärgade 3,5-
anslutningen Surround out
3. Anslut den svarta mini-DIN-kontakten till DIN-ingången
Control in
4. Anslut Line in-kabeln/kablarna till ljudkällan
5. Anslut nätenheten till ingången Power in
6. Anslut nätenheten till nätkontakten
7. Slå på/av systemet med Power/volume-ratten
mittsatellitpanelen
8. Justera systemet genom att använda PC-ljudkort eller annan
ljudkälla
9. Justera volymen genom att använda Volume-ratten
mittsatellitpanelen (7)
10. Nivån på subwoofern kan justeras med ratten Bass control
Obs:
1. Anslut inte nätkontakten till växelströmsuttaget förrän alla
anslutningar har gjorts.
2. Ingång har följande PC 2002-färgmärkning (grön, svart,
orange)
Français
1. Branchez le câble marqué en blanc à la prise jack de 3.5mm
blanche «Front out».
2. Branchez le câble marqué en orange à la prise jack de 3.5mm
orange «Surround out».
3. Branchez le connecteur mini-DIN noir à lentrée DIN «Control in».
4. Branchez le ou les câbles dentrée auxiliaire (Line in) à la source
audio.
5. Branchez le câble dalimentation à lentrée «Power in».
6. Branchez le câble dalimentation à une prise secteur.
7. Mettez le système sous tension en appuyant sur le bouton
«Power/volume» du panneau satellite central.
8. Réglez le système à partir de la carte son du PC ou dune autre
source audio.
9. Réglez le volume à laide du bouton «Volume» du panneau
central (7).
10. Vous pouvez régler le volume du caisson de basses en appuyant
sur le bouton «Bass control».
Remarque:
1. Ne branchez pas le câble dalimentation dans la prise secteur
tant que tous les branchements ne sont pas effectués.
2. Respectez le codage en couleur PC 2002 (vert, noir, orange).
Deutsch:
1. Verbinden Sie das weiß markierte Kabel mit dem weißen 3.5-
mm-Klinkensteckeranschluss Front out.
2. Verbinden Sie das orange markierte Kabel mit dem orangefarbenen
3.5-mm-Klinkensteckeranschluss Surround out.
3. Verbinden Sie den schwarzen Mini-DIN-Steckverbinder mit dem
DIN-Eingang Control in.
4. Verbinden Sie das (die) Line-in-Kabel mit der Tonsignalquelle.
5. Verbinden Sie den Eingang Power in mit der Stromversorgung.
6. Stecken Sie den Netzstecker in die Steckdose.
7. Schalten Sie das System mit der Taste Power/Volume auf
dem mittleren Satellitenfeld ein bzw. aus.
8. Stimmen Sie das System mit Hilfe der PC-Soundkarte oder
einer anderen Tonsignalquelle ab.
9. Stellen Sie die Lautstärke mit Hilfe dem Knopf Volume auf
dem mittleren Satellitenfeld (7) ein.
10. Der Subwoofer-Pegel kann mit dem Knopf Bass control
eingestellt werden.
Hinweis:
1. Schließen Sie das Gerät erst dann an die Stromversorgung
an, wenn alle anderen Verbindungen hergestellt wurden.
2. Die Eingänge entsprechen der folgenden PC 2002
Farbcodierung (grün, schwarz, orange).
Nederlands:
1. Sluit de wit gemarkeerde kabel aan op de het witte busje
van 3,5 mm, Front out
2. Sluit de oranje gemarkeerde kabel aan op het oranje busje
van 3,5 mm Surround out.
3. Sluit de zwarte mini-DIN-plug aan op de mini-DIN-bus
Control in.
4. Verbind de lijningangskabel(s) met de geluidsbron.
5. Sluit de voedingsadapter aan op de ingang Power in.
6. Steek de netstekker in een stopcontact.
7. Schakel het systeem in of uit met de Power/volume-knop
op de centrale satellietluidspreker.
8. Stel het systeem in met behulp van de geluidskaart of een
andere geluidsbron.
9. Stel het volume in met de Volume-knop op de centrale
satellietluidspreker (7).
10. Het volume van de subwoofer is instelbaar met de knop
Bass control.
Opmerking:
1. Verbind de netkabel pas met een stopcontact nadat u alle
verbindingskabeltjes hebt aangesloten.
2. De kleurcodering van connectors voldoet aan de norm PC
2002 (groen, zwart, oranje).
ItalianoItaliano
ItalianoItaliano
Italiano
1. Collegate il cavo bianco al connettore jack da 3.5 Front
out bianco
2. Collegate il cavo arancione al connettore da 3.5 Surround
out arancione
3. Collegate il connettore mini Din nero allingresso Din
Control in
4. Collegate il/i cavo/i Line in alla sorgente audio
5. Collegate lalimentatore allingresso Power in
6. Collegate lalimentatore ad una presa elettrica
7. Accendete/spegnete il sistema tramite la manopola Power/
volume sul pannello satellite centrale
8. Sintonizzate il sistema, con la scheda audio del PC od
unaltra sorgente audio.
9. Regolate il volume, con la manopola Volume sul pannello
satellite centrale (7)
10. Il livello Subwoofer può essere regolato con la manopola
per il controllo dei bassi Bass control.
Nota:
1. Non collegate la spina dalimentazione alla presa CA prima
di aver realizzato tutte le connessioni.
2. Gli ingressi seguono la codifica colore PC 2002 (verde,
nero, arancione)
Polish
1. Pod³¹cz wtyczkê oznaczon¹ kolorem bia³ym do bia³ego
gniazda wyjciowego typu jack 3,5 mm Front out (przód 
wyjcie).
2. Pod³¹cz wtyczkê oznaczon¹ kolorem pomarañczowym do
pomarañczowego gniazda wyjciowego 3,5 mm Surround out.
3. Pod³¹cz czarn¹ wtyczkê mini Din do gniazda wejciowego
sterowania Control in typu Din.
4. Pod³¹cz przewód sygna³u wejciowego do ród³a dwiêku.
5. Pod³¹cz zasilacz do gniazda power in.
6. Pod³¹cz zasilacz do gniazda sieciowego.
7. W³¹cz/wy³¹cz system u¿ywaj¹c pokrêt³a power/volume
(zasilanie/g³onoæ) na panelu centralnego g³onika
satelitarnego.
8. Wyreguluj system za pomoc¹ karty dwiêkowej w
komputerze PC lub innego ród³a dwiêku.
9. Wyreguluj g³onoæ u¿ywaj¹c pokrêt³a volume na panelu
centralnego g³onika satelitarnego (7)
10. Natê¿enie dwiêku w g³onikach niskotonowych mo¿na
regulowaæ za pomoc¹ pokrêt³a Bass control (regulacja
tonów niskich).
Uwaga:
1. Nie wk³adaj wtyczki do gniazda pr¹du zmiennego przed
pod³¹czeniem wszystkich urz¹dzeñ.
2. Kolor zgodny jest ze standardem PC 2002 (zielony, czarny,
pomarañczowy).
RussianRussian
RussianRussian
Russian
1. Ïîäñîåäèíèòå êàáåëü ñ áåëîé ìàðêèðîâêîé ê áåëîìó
ãíåçäíîìó ñîåäèíèòåëþ äèàì. 3,5 Front out (Âûõ. ïåðåäíåãî)
2. Ïîäñîåäèíèòå êàáåëü ñ îðàíæåâîé ìàðêèðîâêîé ê
îðàíæåâîìó ñîåäèíèòåëþ äèàì. 3,5 Surround out (Âûõ.
îêðóæàþùåãî çâóêà)
3. Ïîäñîåäèíèòå ÷åðíûé ìàëîãàáàðèòíûé ñîåäèíèòåëü Din
êî âõîäó Din Control in (Âõ. óïðàâëåíèÿ)
4. Ïîäñîåäèíèòå êàáåëü (êàáåëè) ëèíåéíîãî âõîäà ê èñòî÷íèêó
çâóêà
5. Ïîäñîåäèíèòå áëîê ýëåêòðîïèòàíèÿ êî âõîäó Power in (Âõ.
ïèòàíèÿ)
6. Ïîäñîåäèíèòå âèëêó ñåòåâîãî øíóðà ê áëîêó ýëåêòðîïèòàíèÿ
7. Âêëþ÷èòå/âûêëþ÷èòå ñèñòåìó ðó÷êîé Power/volume (Ïèòàíèå/
ãðîìêîñòü) íà öåíòðàëüíîé âñïîìîãàòåëüíîé ïàíåëè
8. Íàñòðîéòå ñèñòåìó, èñïîëüçóÿ çâóêîâóþ ïëàòó ÏÊ èëè äðóãîé
èñòî÷íèê çâóêà.
9. Íàñòðîéòå ãðîìêîñòü, èñïîëüçóÿ ðó÷êó Volume (ãðîìêîñòü)
íà öåíòðàëüíîé âñïîìîãàòåëüíîé ïàíåëè (7)
10. Óðîâåíü ãðîìêîñòè ñóá-Í× ãðîìêîãîâîðèòåëÿ ìîæíî
íàñòðîèòü ðó÷êîé Bass control (Ðåãóëèðîâàíèå Í×).
Ïðèìå÷àíèå:
1. Íå âñòàâëÿéòå âèëêó øíóðà ïèòàíèÿ â ñåòåâóþ ðîçåòêó äî
òåõ ïîð, ïîêà íå áóäóò âûïîëíåíû âñå ñîåäèíåíèÿ.
2. Ââîä îñóùåñòâëÿåòñÿ â ñîîòâåòñòâèè ñ öâåòîâîé
êîäèðîâêîé ÏÊ 2002 (çåëåíûé, ÷åðíûé, îðàíæåâûé)
Español
1. Conecte el cable marcado en blanco al conector de clavija
blanca de 3,5 mm Front out.
2. Conecte el cable marcado en naranja al conector de clavija
naranja de 3,5 mm Surround out.
3. Conecte el miniconector DIN negro a la entrada DIN Control
in.
4. Conecte los cables de entrada de línea a la fuente de sonido.
5. Conecte la fuente de alimentación a la entrada Power in.
6. Conecte la fuente de alimentación a la red eléctrica.
7. Encienda/apague el sistema con el mando Power/volume
del panel satélite central.
8. Ajuste el sistema mediante la tarjeta de sonido del PC u
otra fuente de sonido.
9. Ajuste el volumen mediante el mando Volume del panel
satélite central (7).
10.El nivel del subwoofer se puede ajustar con el mando de
control de bajos Bass control.
Nota:
1. No conecte el cable de alimentación a un enchufe de CA
hasta que se hayan realizado todas las conexiones.
2. Las entradas siguen los códigos de color PC 2002 (verde,
negro, naranja).
Norwegian
1. Koble hvitmerket kabel til hvit Front out 3,5-pluggkontakt
2. Koble oransjemerket kabel til oransje Surround out 3,5-
kontakt
3. Koble svart MiniDin-kontakt til Control in Din-inngang
4. Koble Line in-kabel/kabler til lydkilde
5. Koble strømforsyning til Power in-inngang
6. Plugg strømforsyning inn i strømuttaket
7. Slå systemet på/av med Power/volume - knotten midtre
satellittpanel
8. Finjuster systemet ved bruk av PC-lydkort eller annen
lydkilde.
9. Finjuster volum ved bruk av Volume-knotten midtre
satellittpanel (7)
10.Basshøyttalernivå kan finjusteres med knotten Bass control.
Merk:
1. Sett ikke strømstøpselet inn i vekselstrømuttaket før alle
tilkoblinger er utført.
2. Innganger følger PC 2002 fargemerking (grønn, svart,
oransje)
Finnish
1. Kytke valkoisella merkitty kaapeli valkoiseen 3,5 mm:n Front out -
liitäntään.
2. Kytke oranssilla merkitty kaapeli oranssiin 3,5 mm:n Surround out
-liitäntään.
3. Kytke musta Mini Din -liitin Control in -tuloliitäntään.
4. Kytke linjatulokaapeli(t) äänilähteeseen.
5. Kytke virtalähde Power in -tuloliitäntään.
6. Kytke virtalähde pistorasiaan.
7. Voit kytkeä järjestelmän päälle tai pois päältä kiertämällä
keskisatelliittipaneelin Power/Volume-säädintä.
8. Säädä järjestelmä käyttämällä tietokoneen äänikorttia tai muuta
äänilähdettä.
9. Voit säätää äänenvoimakkuutta keskisatelliittipaneelin (7) Volume-
säätimellä
10. Voit säätää subwooferin tasoa Bass control -säätimellä.
Huomautus:
1. Älä kytke virtalähdettä pistorasiaan, ennen kuin kaikki kytkennät
on tehty.
2. Tuloliitännät on merkitty PC 2002 -värikoodijärjestelmän mukaisesti
(vihreä, musta, oranssi).
1 / 1

Philips MMS 260 Používateľská príručka

Kategória
Doplnkové hudobné zariadenie
Typ
Používateľská príručka
Táto príručka je tiež vhodná pre