Logitech SLIM FOLIO Case Návod na inštaláciu

Kategória
Obaly na tablety
Typ
Návod na inštaláciu
SLIM FOLIO
Case with integrated Bluetooth keyboard
Setup Guide
2
CONTENTS
3 ENGLISH
11 DEUTSCH
20 FRANÇAIS
29 ITALIANO
38 ESPAÑOL
47 PORTUGUÊS
56 NEDERLANDS
65 SVENSKA
74 DANSK
83 NORSK
92 SUOMI
101 ΕΛΛΗΝΙΚΑ
111 ПОРУССКИ
121 MAGYAR
130 ČESKÁ VERZE
140 PO POLSKU
149 SLOVENČINA
158 TÜRE
 167
 176
English 3
Know your product
1 Tablet holder
2 Battery holder
(two Lithium coin
batteries pre-installed)
3 Hot keys
4 Keyboard
5 Bluetooth
®
and battery
status light
6 Product
documentation
1
4
2
3
5
6
1
2
3
1
4
2
5
3
2s
®
Bluetooth LE
SLIM FOLIO iK1052
Case with integrated Bluetooth
®
keyboard
4 English
Setting up the keyboard case
Getting started
1 Pull the battery tab away from
the keyboard:
2 Open the keyboard case, make sure
the edge of your iPad is aligned with
the tablet holder and push down:
3 Move the keyboard case into the typing
position:
The keyboard turns on automatically.
Establishing connection with your iPad
The keyboard case links to your iPad via
a Bluetooth connection. The rst time
you use the keyboard case, you must pair
it with your iPad.
The status light blinks blue to indicate
that the keyboard is discoverable, ready
for pairing with your iPad.
English 5
The rst time you turn on the keyboard it
remains discoverable for 15 minutes.
If the status light turns red, replace
the batteries. For more information,
see “Replacing the keyboard batteries.
To pair your keyboard case with your iPad:
1 On your iPad:
Make sure Bluetooth is on.
Select Settings > Bluetooth > On.
Select “Slim Folio” from the Devices
menu.
2 If your iPad requests a PIN, enter it
using the keyboard (not on your iPad).
When successful connection is made,
the status light turns solid blue for
a short time, and then turns o.
Connecting to another iPad
1 Move the keyboard case into the typing
position.
2 On your iPad, make sure Bluetooth
is on. Select Settings > Bluetooth > On.
3 Press the Bluetooth connect button
for 2 seconds until the status light
blinks blue:
2s
The keyboard is discoverable
for 3 minutes.
4 Select “Slim Folio” from the Devices
menu.
5 If your iPad requests a PIN, enter it
using the keyboard (not on your iPad).
When successful connection is made,
the status light turns solid blue for
a short time, and then turns o.
6 English
Using the keyboard case
Two viewing positions
The keyboard case provides two viewing
positions—one for typing and another
for browsing.
To type, move the keyboard case into
the typing position, aligning it with
the built-in magnet to secure it:
The keyboard turns on automatically
when you move the keyboard case into
the typing positon.
To browse, place the keyboard case in
the browsing position:
The keyboard powers o automatically
when you move the keyboard case out
of the typing position.
Detaching your iPad
To detach your iPad from the case,
bend back one of the tablet holder
corners:
Your iPad is then released:
Storing your iPad for travel
1 Insert your iPad in the tablet holder.
2 Close the keyboard case:
English 7
Status light indicators
Your keyboard case’s status light provides information about the battery power
and Bluetooth connection:
Light Description
Green The batteries have adequate charge.
Red Battery power is low (less than 10%). Replace the batteries.
Blinking blue Fast: The keyboard is in discovery mode, ready for pairing.
Slow: The keyboard is trying to reconnect to your iPad.
Solid blue Bluetooth pairing or reconnection is successful.
8 English
Hot keys
Home = iPad Home screen
Siri
Use your voice to send messages,
make calls, schedule meetings,
and more
Search
Type keywords in the search bar
for contacts, music, notes, events,
mail, web, and more
Switch language
Switches the keyboard language
Virtual keyboard
Shows/hides the virtual keyboard
Previous track
Play/Pause
Next track
Mute
Volume down
Volume up
Lock screen
Locks or unlocks the iPad screen
Bluetooth connect
Battery check
Check the keyboard battery
status
Function keys
Fn + X = Cut
Fn + C = Copy
Fn + V = Paste
Note: To select a function key, press and hold the fn key, and then press the key indicated above.
English 9
Replacing the keyboard batteries
If the status light is red the keyboard case
batteries need to be replaced.
1 Rotate your keyboard and fold
thetablet holder round to the back
ofthe keyboard.
2 Using a ngernail or thumbnail,
pryopen the battery holder from
thetop of the keyboard.
3 Remove the old batteries and insert
new batteries.
4 Close the battery holder.
Battery information
A set of new batteries provides about
four years of use when the keyboard
is used about two hours a day.*
Replace the batteries if the status light
turns red briey after the keyboard
turns on.
When not in use, close the keyboard
case to conserve power.
The keyboard enters sleep mode
automatically if not used for a while
in the typing position. Press any key
to wake it.
* Actual battery life will vary with use, settings, and environmental conditions.
10 English
Visit Product Support
There’s more information and support
online for your product. Take a moment
to visit Product Support to learn more
about your new Bluetooth keyboard.
Browse online articles for setup help,
usage tips, and information about
additional features. If your Bluetooth
keyboard has optional software, learn
about its benets and how it can help you
customize your product.
Connect with other users in
our Community Forums to get advice,
ask questions, and share solutions.
At Product Support, you’ll nd a wide
selection of content including:
Tutorials
Troubleshooting
Support community
Online documentation
Warranty information
Spare parts (when available)
Go to:
www.logitech.com/support/slim_folio
Troubleshooting
The keyboard does not work
Press any key to wake the keyboard
from sleep mode.
Turn the keyboard o and then
back on.
Replace the keyboard batteries.
For more information,
see “Replacing the keyboard batteries.
Re-establish the Bluetooth connection
between the keyboard and your iPad.
On your iPad, check that Bluetooth is
turned on. (Settings > Bluetooth > On).
Choose “Slim Folio” from the Devices
menu on your iPad. The status light
turns solid blue when Bluetooth
connection is established.
What do you think?
Thank you for purchasing our product.
Please take a minute to tell us what you
think of it.
www.logitech.com/ithink
Deutsch 11
Produkt auf einen Blick
1 Tablet-Halterung
2 Batteriefach
(zwei Lithium-
Knopfzellenbatterien,
bereits eingelegt)
3 Sondertasten
4 Tastatur
5 Bluetooth
®
- und
Batteriestandsanzeige
6 Dokumentation
1
4
2
3
5
6
1
2
3
1
4
2
5
3
2s
®
Bluetooth LE
SLIM FOLIO iK1052
Case with integrated Bluetooth
®
keyboard
12 Deutsch
Einrichten des Keyboard Case
Erste Schritte
1 Ziehen Sie den Schutzstreifen
der Batterie aus der Tastatur heraus:
2 Önen Sie das Tastatur-Case,
stellen Sie sicher, dass die Kante
Ihres iPads an der Tablet-Halterung
ausgerichtet ist, und drücken Sie
es nach unten:
3 Bringen Sie das Tastatur-Case in
die Schreibposition:
Die Tastatur wird automatisch
eingeschaltet.
Herstellen der Verbindung mit dem iPad
Das Tastatur-Case stellt die Verbindung
mit dem iPad über Bluetooth her. Bei der
ersten Verwendung des Tastatur-Case
müssen Sie ein Pairing mit dem iPad
durchführen.
Die Statusanzeige blinkt blau, um
anzuzeigen, dass die Tastatur erkennbar
und zum Pairen mit dem iPad bereit ist.
Deutsch 13
Nach dem ersten Einschalten bleibt
die Tastatur für 15 Minuten erkennbar.
Wenn die Statusanzeige rot leuchtet,
tauschen Sie die Batterien aus.
Weitere Informationen nden Sie unter
„Auswechseln der Tastaturbatterien“.
So pairen Sie Ihr Tastatur-Case mit
dem iPad:
1 Führen Sie auf dem iPad die folgenden
Schritte aus:
Vergewissern Sie sich,
dass Bluetooth aktiviert ist.
Wählen Sie „Einstellungen >
Bluetooth > Ein“.
Wählen Sie „Slim Folio“ aus
dem Gerätemenü.
2 Wenn Sie nach einer PIN gefragt
werden, tippen Sie sie mithilfe der
Tastatur ein (nicht auf dem iPad).
Wenn eine Verbindung hergestellt
wurde, leuchtet die Statusanzeige
für kurze Zeit durchgehend blau und
erlischt anschließend.
Verbinden mit einem anderen iPad
1 Bringen Sie das Tastatur-Case in
die Schreibposition.
2 Vergewissern Sie sich, dass auf
Ihrem iPad Bluetooth aktiviert ist.
Wählen Sie „Einstellungen >
Bluetooth > Ein“.
3 Drücken Sie die Bluetooth-
Verbindungstaste für 2 Sekunden, bis
die Statusanzeige blau blinkt.
2s
Die Tastatur ist drei Minuten lang
erkennbar.
4 Wählen Sie „Slim Folio“ aus dem
Gerätemenü.
5 Wenn Sie nach einer PIN gefragt
werden, tippen Sie sie mithilfe der
Tastatur ein (nicht auf dem iPad).
Wenn eine Verbindung hergestellt
wurde, leuchtet die Statusanzeige
für kurze Zeit durchgehend blau und
erlischt anschließend.
14 Deutsch
Verwenden des Tastatur-Case
Zwei Blickwinkel
Das Tastatur-Case ermöglicht zwei
Blickwinkel – einen zum Tippen und einen
zum Surfen.
Wenn Sie tippen möchten, bringen Sie das
Tastatur-Case in die Schreibposition und
befestigen Sie es mithilfe des integrierten
Magneten:
Die Tastatur wird automatisch
eingeschaltet, wenn sich das Tastatur-
Case in der Schreibposition bendet.
Wenn Sie surfen möchten, bringen Sie das
Tastatur-Case in die Surfposition:
Die Tastatur wird automatisch
ausgeschaltet, wenn sich das Tastatur-
Case nicht in der Schreibposition bendet.
Herausnehmen Ihres iPads
Wenn Sie das iPad aus dem Case
herausnehmen möchten, biegen Sie
eine der Eckhalterungen des Tablets
nach hinten:
Ihr iPad lässt sich dann herausnehmen:
Verstauen des iPads für den Transport
1 Setzen Sie das iPad in die Tablet-
Halterung.
2 Schließen Sie das Tastatur-Case:
Deutsch 15
Statusanzeigen
Die Statusanzeige Ihres Tastatur-Case bietet Informationen zum Batteriestand
der Tastatur und zur Bluetooth-Verbindung:
LED Beschreibung
Grün Die Batterien sind ausreichend geladen.
Rot Der Batterie-Ladezustand ist niedrig (weniger als 10 %).
Tauschen Sie die Batterien aus.
Blinkt blau Schnell: Die Tastatur ist im Erkennungsmodus und wartet
auf das Pairing.
Langsam: Die Tastatur versucht, erneut eine Verbindung
mit Ihrem iPad herzustellen.
Leuchtet dauerhaft
blau
Das Bluetooth-Pairing bzw. die Wiederverbindung war
erfolgreich.
16 Deutsch
Sondertasten
Home = Startbildschirm
des iPads
Siri
Sie können mit Ihrer Stimme
Nachrichten senden,
Termine planen, Telefonnummern
wählen und mehr
Suchen
Geben Sie in die Suchleiste
Stichwörter ein, um nach
Kontakten, Musik, Notizen,
Events und E-Mails zu suchen oder
um eine Suche im Internet zu
starten und mehr
Sprache ändern
Ändert die Tastatursprache
Virtuelle Tastatur
Zeigt die virtuelle Tastatur an oder
blendet sie aus
Vorheriger Titel
Wiedergabe/Pause
Nächster Titel
Stumm
Leiser
Lauter
Bildschirm sperren
Sperrt oder entsperrt
den Bildschirm des iPads
Bluetooth-Verbindung
Batterieprüfung
Prüft den Status
der Tastaturbatterien
Funktionstasten
Fn + X = Ausschneiden
Fn + C = Kopieren
Fn + V = Einfügen
Hinweis: Um eine Funktionstaste auszuwählen, halten Sie die Fn-Taste gedrückt und drücken Sie die oben
angegebene Taste.
Deutsch 17
Auswechseln der Tastaturbatterien
Wenn die Statusanzeige rot leuchtet,
müssen die Batterien des Tastatur-Case
ausgewechselt werden.
1 Drehen Sie die Tastatur und klappen Sie
die Tablet-Halterung auf die Rückseite
der Tastatur.
2 Önen Sie die Batteriefachabdeckung
an der Oberseite der Tastatur mit dem
Daumen- oder Fingernagel.
3 Ersetzen Sie alten Batterien durch
neue.
4 Schließen Sie das Batteriefach.
Informationen zur Batterie
Ein Satz neuer Batterien gewährleistet
etwa vier Jahre Laufzeit, wenn die
Tastatur ca. zwei Stunden am Tag
genutzt wird.*
Tauschen Sie die Batterien aus,
wenn die Statusanzeige nach dem
Einschalten der Tastatur kurz rot
leuchtet.
Schließen Sie das Tastatur-Case,
wenn es nicht verwendet wird, um
Energie zu sparen.
Die Tastatur wechselt automatisch
in den Energiesparmodus, wenn Sie
sie in der Schreibposition eine Zeit
lang nicht verwenden. Drücken Sie
eine beliebige Taste, um den
Energiesparmodus zu beenden.
* Die tatsächliche Batterielaufzeit variiert je nach Nutzung des Geräts,
Einstellungen und Umgebungsbedingungen.
18 Deutsch
Besuchen Sie den Support
Hier erhalten Sie weitere Informationen
und haben Zugri auf den Online-
Support für Ihr Produkt. Nehmen Sie sich
einen Augenblick Zeit und besuchen Sie
den Produktsupport, um mehr über Ihre
neue Bluetooth-Tastatur herauszunden.
Durchsuchen Sie Online-Artikel zur
Unterstützung beim Einrichten, für Tipps
zur Nutzung und für Informationen
zu weiteren Funktionen. Wenn für
die Bluetooth-Tastatur optionale
Software verfügbar ist, können Sie
hier herausnden, wie Sie die Tastatur
an Ihre Bedürfnisse anpassen und alle
ihre Funktionen optimal nutzen können.
In unseren Community-Foren können
Sie mit anderen Benutzern Kontakt
aufnehmen und sich Tipps holen,
Fragen stellen und Ihre Problemlösungen
mit anderen teilen.
Der Produktsupport bietet ein
umfangreiches Informationsangebot:
Tutorials
Fehlerbehebung
Support-Community
Online-Bedienungsanleitungen
Garantieinformationen
Ersatzteile (falls verfügbar)
Besuchen Sie die Seite:
www.logitech.com/support/slim_folio
Deutsch 19
Fehlerbehebung
Die Tastatur funktioniert nicht
Drücken Sie eine beliebige Taste,
um den Energiesparmodus der Tastatur
zu beenden.
Schalten Sie die Tastatur aus und
wieder ein.
Tauschen Sie die Tastaturbatterien aus.
Weitere Informationen nden Sie unter
„Auswechseln der Tastaturbatterien“.
Stellen Sie die Bluetooth-Verbindung
zwischen der Tastatur und Ihrem iPad
wieder her.
Vergewissern Sie sich, dass die
Bluetooth-Funktion auf Ihrem iPad
eingeschaltet ist. („Einstellungen >
Bluetooth > Ein“).
Wählen Sie „Slim Folio“ aus
dem Gerätemenü auf Ihrem iPad.
Die Statusanzeige leuchtet nach
dem Herstellen der Bluetooth-
Verbindung dauerhaft blau.
Ihre Meinung ist gefragt.
Vielen Dank, dass Sie sich für unser Produkt entschieden haben.
Bitte nehmen Sie sich einen Moment Zeit, um ein paar Fragen zu beantworten.
www.logitech.com/ithink
20 Français
Présentation du produit
1 Support pour tablette
2 Compartiment des piles
(deux piles bouton
au lithium pré-insérées)
3 Touches de raccourci
4 Clavier
5 moin Bluetooth
®
et
de charge de la batterie
6 Documentation sur
le produit
1
4
2
3
5
6
1
2
3
1
4
2
5
3
2s
®
Bluetooth LE
SLIM FOLIO iK1052
Case with integrated Bluetooth
®
keyboard
1 / 1

Logitech SLIM FOLIO Case Návod na inštaláciu

Kategória
Obaly na tablety
Typ
Návod na inštaláciu