Panasonic SCNE3EG Návod na používanie

Značka: Panasonic

Model: SCNE3EG

Kategória: Bluetooth hudobné prijímače

Typ: Návod na používanie

VQT4U54

until

2013/1/17

POLSKI ENGLISHČESKY

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Wireless Speaker System

System głośników bezprzewodowych

Bezdrátový reproduktorový systém

Model No. SC-NE3

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Dziękujemy za zakupienie tego produktu.

Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie przeczytać niniejsze zalecenia i

zachować instrukcję obsługi do wglądu.

Děkujeme, že jste si zakoupil tento výrobek.

Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte pro pozdější použití.

Included Installation Instructions (l 2, 18–19)

The installation work should be done by a qualified installation specialist.

Before commencing work, carefully read these installation instructions and the operating instructions to ensure

that installation is performed correctly.

(Please keep these instructions. You may need them when maintaining or moving this unit.)

Załączone instrukcje instalacji (l 20, 36–37)

Instalację powinien przeprowadzić wyłącznie wykwalifikowany specjalista.

Przed rozpoczęciem pracy należy się dokładnie zapoznać z instrukcją instalacji oraz z instrukcją obsługi, aby się

upewnić, że instalacja została przeprowadzona prawidłowo.

(Proszę zachować niniejszą instrukcję. Będzie ona potrzebna podczas serwisowania lub przenoszenia

urządzenia.)

Přiložené pokyny k instalaci (l 38, 54–55)

Instalační práce musí být provedeny kvalifikovaným instalatérským odborníkem.

Před zahájením instalace si pečlivě pročtěte tyto pokyny k instalaci a návod k obsluze, abyste instalaci provedli

opravdu správně.

(Tyto pokyny si uschovejte. Můžete je potřebovat při údržbě nebo přesouvání tohoto zařízení.)

SC-NE3_EG~VQT4U54.book 1 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Safety precautions

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases, on

this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥ To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the

plug.

– Do not use a damaged mains plug or socket outlet.

≥ The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from

the socket outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not recharge,

disassemble, heat above 60 xC or incinerate.

≥ Keep the Button-Type battery out of the reach of children.

Never put Button-Type battery in mouth. If swallowed call

your doctor.

Unit

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

Placement

≥ Place this unit on an even surface.

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

≥ Insert with poles aligned.

≥ Mishandling of batteries can cause electrolyte leakage and

may cause a fire.

– Remove the battery if you do not intend to use the remote

control for a long period of time. Store in a cool, dark

place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of

disposal.

NORSK

Produkt

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Utsett ikke produktet for regn, fukt, drypping eller sprut.

– Ikke plasser objekter som er fylt med væske, som vaser,

på apparatet.

– Bruk kun anbefalt tilbehør.

– Fjern ikke deksler.

– Reparer ikke denne enheten selv, overlat service til

kvalifisert servicepersonell.

Vekselstrømnett

≥ Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan

trekkes fra stikkontakten.

Produkt

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate

klimaforhold.

Plassering

≥ For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

– Ikke plasser apparatet i en bokhylle, et innebygget

kabinett eller et annet lukket sted. Pass på at produktet er

godt ventilert.

– Apparatets ventilasjonsåpninger må ikke dekkes til med

aviser, duker, gardiner eller lignende.

WARNING

CAUTION

ADVARSEL

FORSIKTIG

Product Identification Marking is located on the bottom of the unit.

SC-NE3_EG~VQT4U54.book 2 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Table of contents

Safety precautions............................................ 2

Accessories....................................................... 3

Control reference guide ................................... 4

Connections ...................................................... 5

Network settings............................................... 6

Using AirPlay with this unit’s speakers.......... 9

Playing back music files on

the DLNA server .......................................... 10

Bluetooth

operations .................................... 11

Sound adjustment .......................................... 12

Others .............................................................. 12

Troubleshooting.............................................. 14

Specifications ................................................. 16

About Bluetooth

............................................ 17

Unit care .......................................................... 17

Licenses .......................................................... 17

Attaching the unit to a wall (optional)........... 18

Accessories

About descriptions in these operating

instructions

≥

Pages to be referred to are indicated as “

l ±±

”.

≥ Unless otherwise indicated, operations are

described using the remote control.

Check the supplied accessories before using this unit.

∏ 1 Remote control (with a battery)

(N2QAYC000091)

∏ 1 AC mains lead

Wall mounting accessories

∏ 1 Screw

∏ 1 Safety holder

∏ 2 Wall mount brackets



≥ Do not use AC mains lead with other equipment.

≥ Product numbers provided in these operating instructions are

correct as of January 2013. These may be subject to

change.

Android

, Google Play

, Google Chrome

browser are

trademarks or registered trademarks of Google Inc.

Information for Users on Collection and Disposal of Old Equipment and used

Batteries

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products and used batteries, please

take them to applicable collection points, in accordance with your national legislation and

the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please

contact your local municipality, your waste disposal service or the point of sale where

you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

SC-NE3_EG~VQT4U54.book 3 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Control reference guide

1 Standby/on switch [Í/I] ([Í])

Press to switch the unit from on to standby mode or vice

versa.

In standby mode, the unit is still consuming a small amount

of power.

2 Enter sound menu

3 Enter setup menu

4 Select Bluetooth

/AUX

5 Adjust the volume (0 (min) to 50 (max))

6 Enter the Bluetooth

menu/

Change the sound input level of the external device

(l 5)/

Select the playback mode for AirPlay (l 10)

7 Mute the sound

Mutes the sound. Press again to cancel. “MUTE” is also

cancelled when the volume is adjusted or the unit is turned

off.

8 Selection/OK

9 WPS pairing button (l 7)

10 Display

11 Remote control signal sensor

Distance: Within approx. 7 m directly in front.

≥ To avoid interference, please do not put any objects in

front of signal sensor.

12 Wi-Fi

status indicator

∫ Before using for the first time

Remove the insulation sheet A.

∫ To replace a button-type battery

Battery type: CR2025 (Lithium battery)

1 2

≥ Set the button-type battery with its (i) mark

facing upward.

≥ Keep the button-type battery out of reach of

children to prevent swallowing.

VOLUME

10 11

Top view

SOUND

SETUP

PLAY MENU





SC-NE3_EG~VQT4U54.book 4 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Connections



≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily

influenced by magnetism.

≥ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth

device

(“PAIRING”) is displayed. (l 11)

∫ To select the sound input level of the external device

1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK].

2 Press [3, 4] to select “NORMAL” or “HIGH”.

≥ The default setting is “NORMAL”.



≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will

distort the sound.

≥ For details, refer to the instruction manual of the other equipment.

≥ The cables and the devices are not supplied.

Additional Connection

モヤチリワ

Connect the AC mains lead.

To household mains socket

This unit consumes a small amount of AC power (l 16) even when turned off.

≥ In the interest of power conservation, if you will not be using this unit for an extended period of time,

unplug it from the household mains socket.

AC mains lead (supplied)

モヤチリワ

Connect an external music device (for AUX mode).

1 Plug the audio cable (not supplied) into the AUX jack.

Plug type: ‰3.5 mm stereo

2 Press [ , AUX] to select “AUX” and start playback on the

connected device.

Audio cable (not supplied)

SC-NE3_EG~VQT4U54.book 5 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Network settings

You can wirelessly stream music from an iOS device

(iPhone, iPod, iPad), an Android device or a Mac/PC to

this unit’s speakers by using the AirPlay or DLNA

feature.

To use these features, this unit must join the same

2.4 GHz wireless network as the AirPlay compatible

device or the DLNA compatible device.

≥ It is also possible to use AirPlay without a wireless network

router. (l 9, “Directly streaming to this unit (AirPlay)”)

∫ Compatible AirPlay devices

(as of January 2013)

Preparation

≥ Place this unit close to the wireless network router.

1 Turn this unit on.

2 Follow the chart below to choose the network

setting method.

≥ If you want to apply the advanced setting,

or you want to perform wireless setting with your

Mac/PC, try “Method 3” on page 7.



≥ To cancel this setting in the middle, press [Í] to turn off the

unit.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

≥ For up to date compatibility information on your wireless

network router refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

iOS 4.3.3 or later

iPod touch

3rd, 4th, and 5th generation

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS

iPad (3rd, and 4th generation) / iPad 2 / iPad

iPad mini

iTunes 10.2.2 or later (Mac / PC)

Are you using an iPod touch/iPhone/iPad,

or an Android device?

Yes

Does your wireless network router

support WPS?

l 7,

“Method 1”

l 7,

“Method 2”

l 7,

“Method 3”

No / Do not know

Yes No

SC-NE3_EG~VQT4U54.book 6 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

∫ Using the WPS Push Button

Configuration (PBC)

1 Press and hold [– WPS] on the unit.

{. “WPS” flashes on the display.

(The Wi-Fi status indicator blinks blue.)

≥ Complete step 2 within 2 mins.

2 After “WPS” is indicated, press the WPS button on

the wireless network router.

3 The unit’s settings are completed when

“SUCCESS” is displayed and the Wi-Fi status

indicator stops blinking and lights in blue.

4 Press [OK] on the remote control to exit the

setting.



≥ To use the WPS PIN code, refer to the notes on page 8.

You can make the wireless network settings with the

app, “Panasonic Stereo System Network Setup” (for

free).

If you’re using an Android device, download the app at

the Google Play Store. If you’re using an iPod touch/

iPhone/iPad, download it at the App Store.

Preparation

≥ Connect your smartphone to your home wireless

network.

≥ Check the password for your home wireless network.

1 Press [SETUP] on the remote control repeatedly

to select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi status indicator blinks purple.)

2 Start “Panasonic Stereo System Network

Setup

” on your smartphone and follow the

indications.

∫ Note for the iOS version

After step 2

1 Enter the password for the home wireless network

to which the iOS device is connected.

2 When a message instructing you to connect the

iOS device to this unit is displayed, press the

home button to close the app.

3 On the Wi-Fi network selection screen in

“Settings”, select “00 Setup _ _ _ _ _ _”.

≥ “ _ ” stands for a digit that is unique to each set.

4 When a message indicating the completion of the

connection to this unit is displayed, restart the app.

5 When a message indicating the completion of the

Wi-Fi setup of this unit is displayed, close the app,

and then check the operation of AirPlay, etc.



≥ “Panasonic Stereo System Network Setup” for Mac OS is

also available at the App Store.

With this method, you will access this unit’s wireless

network settings from the Internet browser of your

compatible device.

≥ The following explanations are based on an iPhone.

1 Press [SETUP] on the remote control repeatedly

to select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi status indicator blinks purple.)

2 After “SETTING” is indicated, connect your

compatible device to this unit’s wireless network

named “00 Setup _ _ _ _ _ _”.

≥ “ _ ” stands for a digit that is unique to each set.

≥ Make sure that DHCP is enabled for the network setting

on your compatible device.

Method 1

If your wireless network router supports WPS

(Wi-Fi Protected Setup

The WPS identifier mark

WPS Push Button Configuration

(PBC) compatible wireless network

router may have this mark.

“FAIL” may be displayed if the connection was not

made within the set time limit. Try the setting again.

If “FAIL” is still displayed, try other methods.

Method 2

Setting the network connection with the smartphone

app

Method 3

Setting the network connection from an Internet

browser.

SC-NE3_EG~VQT4U54.book 7 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

3 Start the Internet browser on your compatible

device and type “http://192.168.1.12/” into the

URL address field and display the page.

{. This unit’s setup window is displayed.

≥ Examples of Internet browsers

iOS device/Mac : Safari

Android device : Google Chrome browser

PC : Windows Internet Explorer

4 Select “Search wireless network”.

5 Select and input the details.

≥ Check your home wireless network name

(Network name (SSID)) and password for this

network. This can often be found on the wireless

network router itself.

6 Select “JOIN” to apply the settings.

≥ In the pop-up screen, select “OK” to continue.

– Select “Cancel” to return to the setup window.

7 The unit’s settings are completed when

“SUCCESS” is displayed and the Wi-Fi status

indicator stops blinking and lights in blue.

8 Make sure to connect your compatible device back

to your home wireless network.

*1: If you have set your wireless network to be invisible, select

“BACK” and refer to “Alternative settings”.

≥ The below settings are the alternative or additional settings

for “Method 3”. (l 7)



≥ Enable Java and Cookies in your browser settings.

≥ This unit can also be set using the WPS PIN code.

Replace step 2 of “Method 1” with the following steps.

(Before starting, refer to the wireless network router’s

operating instructions for details on how to enter the PIN

code.)

1 While “WPS” is flashing press and hold [– WPS] again

to display the 8 digit PIN code.

{. Wi-Fi status indicator blinks purple.

2 Enter the PIN code into the wireless network router.

[1] Select your home wireless network

name.*

[2] Type the password.

If “FAIL” is displayed press [OK], check the wireless

network password and other settings and start again

from step 1.

Advanced network settings

Alternative settings

Instead of steps 4 and 5

Select “Manual settings”.

1 Type your home wireless network name into

the “Network name (SSID)” field.

2 Select the encryption method from the

“Security system” drop down list.

3 Type the password into the “Password” field

and then select “JOIN”.

Additional settings

If your home wireless network has been configured

to use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Before step 6

Select “Advanced network settings”.

{. Input the required addresses into each field and select

“JOIN”.

≥ To change the settings back to DHCP, select “ON” from the

“DHCP” drop down list.

If you want to change the name of this unit that is

displayed as the AirPlay speakers or DLNA renderer.

Before step 4

Select “Additional settings”.

1 Select “Edit STEREO SYSTEM name”.

2 Type a new name into the

“STEREO SYSTEM name” field.

{. Only ASCII characters can be used.

3 Select “OK”.

4 If this unit is already connected to your home

wireless network:

–Select “Additional settings” and then select

“Exit”.

If this unit is not connected to your home

wireless network:

– Continue to step 4 of “Method 3”.

SC-NE3_EG~VQT4U54.book 8 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Using AirPlay with this unit’s

speakers

1 Turn the unit on.

≥ Check that the Wi-Fi status indicator lights in

blue.

≥ If it doesn’t light in blue, check the wireless

network settings. (l 6)

2 iOS device: Start the “Music” (or iPod) app.

Mac/PC: Start “iTunes”.

≥ If the Music app on your iOS device is used, select the

audio file you want to play.

3 Select “Panasonic NE3 _ _ _ _ _ _”*

1, 2

from the

AirPlay icon.

{. Check the volume settings before starting the playback.

(When AirPlay is used for the first time, the volume may

be output at the maximum setting.)

4 Start play.

≥ The playback will start with a slight delay.



≥ This unit can be set to turn on automatically when this unit is

selected as the output speakers. (l 12)

≥ Playback of other audio sources will stop and AirPlay output

will have priority.

≥ Volume changes on the iOS device or iTunes will be applied

to this unit. (Refer to the iTunes Help for the required settings

in iTunes.)

≥ With some iOS and iTunes versions, it may not be possible

to restart the AirPlay playback if the selector is changed

(e.g., “AUX”) or the unit is turned off, during the AirPlay

playback.

In this case, select a different device from the AirPlay icon of

the Music App or iTunes and then re-select this unit as the

output speakers.

≥ AirPlay will not work when playing back videos on iTunes.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this unit can be changed

from the “Edit STEREO SYSTEM name” settings.

(l 8, “Advanced network settings”)

With this function set to “ON”, you can stream music

from the iOS device or Mac / PC (iTunes 10.2.2 or

later) to this unit without the need of a wireless network

router.

≥ Previous network settings will be deleted when this

function is set to “ON”.

≥ The following explanations are based on an iPhone.

1 Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “ON” and then press [OK].

3 Press [3, 4] to select “OK? YES” and then press

[OK].

4 Connect your iPhone to this unit’s wireless

network named “NE3 _ _ _ _ _ _”*

5 Enter the password that is indicated on this unit’s

display.

6 Once the iPhone is connected to this unit’s

wireless network, the setup is competed.

7 Continue to step 2 of “Using AirPlay with this unit’s

speakers”.



≥ This setting is reset to “OFF” when other network settings are

performed. (l 6)

≥ When “D.CONNECT” is set to “ON”, this unit will not be

connected to the Internet. It is not possible to update the

software or check the Wi-Fi signal strength.

≥ When AirPlay is not being used, disconnect the AirPlay

compatible device from this network.

≥ When using a computer on this network, make sure that all

the shared files are encrypted.

≥ This feature is only compatible with the “Open System”

authentication method. It is not compatible with “Shared Key”

authentication method.

*1: “ _ ” stands for a digit.

*2: “ _ ” stands for a digit that is unique to each set.

Preparation

≥ Complete the network settings. (l 6)

≥ Connect the iOS device or Mac/PC to the same

home wireless network as this unit.

NE3

e.g., iPhone iOS 6.0.1

NE3

e.g., iTunes 11.0

Directly streaming to this unit

(AirPlay)

“PW _ _ _ _ _”*

is displayed.

The 5 digits after “PW” is the password for this

network.

SC-NE3_EG~VQT4U54.book 9 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

The first time “D.CONNECT” is set to “ON”, a

password for this unit’s wireless network is randomly

created and memorised in this unit.

≥ This password is memorised until it is changed.

1 While “D.CONNECT” is set to “ON”:

Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “ON” and then press [OK].

3 The current password is displayed.

≥ The 5 digits after “PW” is the password for this

network.

4 Press any button to exit.

1 While “D.CONNECT” is set to “OFF”:

Press [SETUP] repeatedly to select

“D.CONNECT”.

2 Press [3, 4] to select “CHANGE PW” and then

press [OK].

3 Press [3, 4] to select “OK? YES” and then press

[OK].

4 The new password is displayed.

≥ The 5 digits after “PW” is the new password for

this network.

5 Press any button to exit.

∫ Note about changing the password

After changing this unit’s wireless network password, if

you are not prompted to change the password on the

other devices, the following changes are required.

iOS device (iPod touch/iPhone/iPad)*

≥ Before choosing this unit’s network,

1 Select [ ] located beside this unit’s wireless

network name.

2 Select “Forget this Network” and then select

“Forget”.

3 Select this unit’s wireless network and enter the

new password.

Mac/PC:

≥ If the computer has memorised the old password, be

sure to change the memorised password for this

unit’s wireless network to the new one.



≥ Refer to the devices’s operating instructions for details.

*1: Steps are based on iOS 6.0.1.

Select the playback mode. Perform the settings during

playback.

REPEAT

1 Press [PLAY MENU] to select “REPEAT”.

2 Press [3, 4] to repeat one track, all tracks, etc.

SHUFFLE

1 Press [PLAY MENU] to select “SHUFFLE”.

2 Press [3, 4] to turn on/off the shuffle function.



≥ Refer to the connected device to verify the selected setting.

≥ The applied settings will remain until it is changed.

Playing back music files on the

DLNA server

You can share music files stored in the DLNA Certified

media server (PC with Windows 7 installed,

smartphone, etc.) connected to your home wireless

network, and enjoy the contents with this unit’s

speaker.

1 Turn the unit on.

≥ Check that the Wi-Fi status indicator lights in

blue.

≥ If it doesn’t light in blue, check the wireless

network settings. (l 6)

2 Operate the DMC compatible device and connect

to this unit.

≥ The device name of this unit will be displayed as

“Panasonic NE3 _ _ _ _ _ _”*

1, 2

≥ For details on how to use DMC compatible

devices, refer to the operating instructions of the

devices or the software.

∫ Support format of DLNA client

File formats that are not supported by your DLNA

server cannot be played.



≥ Depending on the contents and the connected equipment,

playback may not be possible.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this unit can be changed

from the “Edit STEREO SYSTEM name” settings.

(l 8, “Advanced network settings”)

Display the password

Change the password

Playback modes

Preparation

≥ Complete the network settings. (l 6)

≥ Connect your device with DMC (Digital Media

Controller) compatible software installed to the

same home wireless network as this unit.

≥ Add the contents and folder to the libraries of the

Windows Media

Player or the smartphone, etc.

– Playlist of Windows Media

Player can play back

only the contents that are stored in the libraries.

Audio codec Example of file extension

MP3 .mp3

WAV .wav

SC-NE3_EG~VQT4U54.book 10 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Bluetooth

operations

By using the Bluetooth

connection, you can listen to the sound from the Bluetooth

audio device from this unit

wirelessly.

≥ Refer to the operating instructions of the Bluetooth

device for details.

Preparation

≥ Turn on the Bluetooth

feature of the device and

place the device near this unit.

≥ If this unit is already connected to a Bluetooth

device, disconnect it.

1 Press [ , AUX] to select “BLUETOOTH”.

≥ If “PAIRING” is indicated on the display, go to step 3.

2 Press [PLAY MENU] to select “NEW DEV.” and

then press [OK].

{. “PAIRING” is indicated on the display.

3 Select “SC-NE3” from the Bluetooth

device’s

Bluetooth

menu.

4 Start play on the Bluetooth

device.



≥ If prompted for the passkey, input “0000”.

≥ You can register up to 8 devices with this unit. If a 9th device

is paired, the device that has not been used for the longest

time will be replaced.

Preparation

≥ Turn on the Bluetooth

feature of the device and

place the device near this unit.

≥ If this unit is already connected to a Bluetooth

device, disconnect it.

1 Press [ , AUX] to select “BLUETOOTH”.

{. “READY” is indicated on the display.

2 Select “SC-NE3” from the Bluetooth

device’s

Bluetooth

menu.

{. The name of the connected device is indicated on the

display for 2 seconds.

3 Start play on the Bluetooth

device.



≥ This unit can only be connected to one device at a time.

≥ When “BLUETOOTH” is selected as the source, this unit will

automatically try and connect to the last connected

Bluetooth

device.

≥ The Bluetooth

device will be disconnected if “AUX” is

selected as an audio source.

You can change the transmission speed to prioritize

transmission quality or sound quality.

Preparation

≥ Press [ , AUX] to select “BLUETOOTH”.

≥ If a Bluetooth

device is already connected,

disconnect it.

1 Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2 Press [3, 4] to select the mode and then press

[OK].

MODE 1: Emphasis on connectivity

MODE 2: Emphasis on sound quality



≥ The default setting is “MODE 1”.

If the sound input level of the Bluetooth

transmission

is too low, change the input level setting.

Preparation

≥ Connect a Bluetooth

device.

1 Press [PLAY MENU] repeatedly to select “INPUT

LEVEL”.

2 Press [3, 4] to select the level and then press

[OK].

“LEVEL 0”

,. “LEVEL +1” ,. “LEVEL +2”

^---------------------------------------------------------J



≥ Select “LEVEL 0” if the sound is distorted.

≥ The default setting is “LEVEL 0”.

1 While a Bluetooth

device is connected:

Press [PLAY MENU] to select “DISCONNECT?”.

2 Press [3, 4] to select “OK? YES” and then press

[OK].

Pairing Bluetooth

devices

Connecting a paired Bluetooth

device

Bluetooth

transmission mode

Bluetooth

input level

Disconnecting a Bluetooth

device

SC-NE3_EG~VQT4U54.book 11 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Sound adjustment

The following sound effects can be added to the audio

output.

1 Press [SOUND] repeatedly to select the effect.

2 Press [3, 4] to select the setting and then press

[OK].

≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

Others

The sleep timer can turn the unit off after a set time.

1 Press [SETUP] to select “SLEEP”.

2 Press [3, 4] to set the time (in minutes) and then

press [OK].

“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”

^---------------------. “OFF” (Cancel) (----------------------J

≥ The remaining time is indicated on the unit’s display except

when other operations are performed.

The brightness of this unit’s display can be changed.

1 Press [SETUP] repeatedly to select “DIMMER”.

2 Press [3, 4] to select “ON” and then press [OK].



≥ To cancel the dimmer, select “OFF” in step 2.

As a factory preset, this unit will always turn off

automatically if there is no sound output and no

operation for approx. 30 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn automatic standby on, select “ON” in step 2.

≥ When connected to a Bluetooth

device, the automatic

standby function does not work.

To check the Wi-Fi signal strength where the unit is

located.

Preparation

Connect this unit to the wireless network. (l 6)

1 Press [SETUP] repeatedly to select “SIG.LEVEL”

and then press [OK].

≥ The unit’s display shows “LEVEL ”.

(“  ” stands for a number.)

2 Press [OK] to exit this display mode.



≥ It is recommended to have a signal strength of “3”. Change

the position or angle of your wireless network router or the

unit if the indication is “2” or “1” and see if the connection

improves.

≥ If “LEVEL 0” is displayed, this unit cannot establish a link with

the wireless network router. (l 15)

≥ This function does not work when “D.CONNECT” is set to

“ON”.

This unit can turn on automatically from standby mode

when this unit is selected as the AirPlay speakers.

Preparation

Connect this unit to the wireless network. (l 6)

1 Press [SETUP] repeatedly to select “NET STNBY”

and then press [OK].

2 Press [3, 4] to select “ON” and then press [OK].



≥ To cancel this function, select “OFF” in step 2.

≥ The factory preset is “OFF”. If this function is set to “ON” the

standby power consumption will increase.

Direct-Vocal

Surround

(D.SURROUND)

“LEVEL 1”, “LEVEL 2” or

“OFF”.

≥ The factory preset is “OFF”.

Preset EQ

(PRESET EQ)

“HEAVY” (heavy), “SOFT”

(soft), “CLEAR” (clear),

“VOCAL” (vocal) or “FLAT”

(flat/off).

≥ The factory preset is “HEAVY”.

Bass (BASS) or

Treble (TREBLE)

Adjust the level (j4 to i4).

Dynamic Bass

(D.BASS)

“ON D.BASS” or

“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

Sleep timer

Display brightness

Automatic standby

Wi-Fi signal strength

Network standby

SC-NE3_EG~VQT4U54.book 12 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Occasionally, Panasonic may release updated

software for this unit that may add or improve the way

a feature operates. These updates are available free of

charge.

Preparation

≥ Turn the unit on.

≥ Connect this unit to the wireless network. (l 6)

– Make sure that the wireless network is connected

to the Internet.

– If “D.CONNECT” is set to “ON”, change the setting

to “OFF” and connect this unit to a wireless

network that is connected to the Internet.

1 Press [SETUP] repeatedly to select

“SW UPDATE” and then press [OK].

2 Press [3, 4] to select “UPDATE? Y” and then

press [OK] to start the update.

3 When the update has finished successfully,

“SUCCESS” is displayed.

4 Disconnect the AC mains lead and reconnect it

after 3 minutes.

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.



≥ If you do not want to update the unit, select “UPDATE? N”

and then press [OK] in step 2.

≥ If there are no updates, “NO NEED” is displayed after step 2.

∫ Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.” and then

press [OK].

{. The version of the installed software is displayed.

2 Press [OK] to exit.

Display the name for the connected wireless network

(SSID).

1 Press and hold [– WPS] on the unit and [OK] on

the remote control until the unit's display shows

the SSID.

2 Press [OK] to exit.



≥ If “NOCONNECT” is displayed this unit is not connected to a

wireless network.

≥ All letters are displayed as capital letters, and characters that

cannot be displayed are replaced with “

¢”.

To check the unit’s IP address or the Wi-Fi MAC

address.

1 Press and hold [– WPS] on the unit and [4] on the

remote control until the unit’s display shows the IP

address.

{. The IP address is partially displayed.

≥ To display the MAC address on the unit, repeat the

steps above by replacing [4] with [3].

2 Press [3, 4] on the remote control to show the

rest of the IP address.



≥ To exit the setting, wait 20 sec.

≥ The “ – ” displayed on the top or bottom left of the display

indicate the first and last units respectively.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [ , AUX] to select “AUX”.

2 While pressing and holding [ / AUX] on the unit,

press and hold [SOUND] on the remote control

until the unit’s display shows “REMOTE 2”.

3 Press and hold [OK] and [SOUND] on the remote

control for at least 4 seconds.



≥ To change the mode back to “REMOTE 1”, repeat the steps

above but replace the button pressed on the remote control

from [SOUND] to [ , AUX].

Software update

DO NOT DISCONNECT the AC mains lead while

one of the following messages is displayed.

– “LINKING”, “UPDATING” or “%”

(“  ” stands for a number.)

≥ During the update process, no other operations can be

performed.

Wireless network name (SSID)

IP/MAC Address

Changing the unit and remote

control code

SC-NE3_EG~VQT4U54.book 13 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Troubleshooting

Before requesting service, make the following checks.

If you are in doubt about some of the check points, or if

the solutions indicated in the following guide do not

solve the problem, consult your dealer for instructions.

Do you have the latest software installed?

≥ Occasionally, Panasonic may release updated software for this

unit that may add or improve the way a feature operates. (l 13)

Humming heard during play.

≥ An AC mains lead or fluorescent light is near the cords. Keep

other appliances and cords away from this unit’s cables.

Cannot connect to the network.

≥ Confirm the network connection and settings. (l 6)

≥ Your wireless network might be set to be invisible. In this case

select “Manual settings” in “Method 3”. (l 8)

≥ This unit cannot join a wireless network using WEP security

settings with the WPS methods (“Method 1”). Use “Method 3” to

join the wireless network. (l 7)

≥ Make sure that the multicast function on the wireless network

router is set to on (enabled).

≥ When “D.CONNECT” is used, if the password for "D.CONNECT"

has been changed connect the other device to this unit using the

new password. (l 9)

Cannot connect to the unit.

≥ Display the wireless network name that this unit is connected to

and make sure that the device is connected to the same network.

(l 6, 13)

≥ If “NET STNBY” is set to “OFF”, the AirPlay compatible device

cannot be connected when this unit is off.

≥ Turn off the Wi-Fi setting on the AirPlay compatible device, set

“NET STNBY” to “OFF” (l 12) and then turn this unit off and on.

Reconnect the compatible device to the Wi-Fi network and then

select this unit as the AirPlay speakers again.

My wireless network router is WPS PBC

compatible, but the pairing does not work.

≥ If the network is set to be invisible, the push button configuration

does not work. In this case, either make the wireless network

visible while you set up the network for this unit or use “Method 2”

or “Method 3”. (l 7)

Playback does not start.

The sound is interrupted.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in connection

interruptions.

Increase the distance between this unit and these devices.

≥ Do not place this unit inside a metal cabinet, for it might block the

Wi-Fi signal.

≥ Place this unit closer to the wireless network router.

≥ If “D.CONNECT” is set to “ON”, place the AirPlay compatible

device closer to this unit.

≥ If several wireless devices are simultaneously using the same

wireless network as this unit, try turning off the other devices or

reducing their wireless network usage.

≥ If the playback stops, check the playback status on the iOS device

or iTunes.

≥ If play does not start (even though the Wi-Fi status indicator lights

in blue and the AirPlay icon is displayed), restart the wireless

network router, turn the Wi-Fi connection on the iOS device or

Mac/PC off and on, and then make sure that your home wireless

network is selected.

≥ If the AirPlay icon is not displayed even if Wi-Fi status

indicator lights in blue, try restarting the wireless network router.

≥ With some iOS and iTunes versions, it may not be possible to

restart the AirPlay playback if the selector is changed (e.g.,

“AUX”) or the unit is turned off, during the AirPlay playback.

In this case, select a different device from the AirPlay icon of the

Music App or iTunes and then re-select this unit as the output

speakers. (l 9)

To return all settings to the factory preset

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at least

3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

unit, reconnect the AC mains lead.

≥ Keep holding down [Í/I] until “--------” appears

on the display.

3 Release [Í/I].



≥ All the settings are returned to the factory preset. You will

need to reset the memory items.

Common problems

AirPlay operations

SC-NE3_EG~VQT4U54.book 14 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

Pairing cannot be done.

≥ Check the Bluetooth

device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or the registration has

been replaced. Try pairing the device again.

≥ This unit might be connected to a different device. Disconnect the

other device and try pairing the device again.

The device is connected but audio cannot be heard

through this unit.

≥ For some built-in Bluetooth

devices, you have to set the audio

output to “SC-NE3” manually. Read the operating instructions for

the device for details.

The sound is interrupted.

≥ The device is out of the 10 m communication range. Bring the

Bluetooth

device closer to this unit.

≥ Remove any obstacle between this unit and the device.

≥ Other devices that use the 2.4 GHz frequency band (wireless

router, microwaves, cordless phones, etc.) are interfering. Bring

the Bluetooth

device closer to this unit and distance it from the

other devices.

≥ Select “MODE 1” for stable communication. (l 11)

The remote control doesn’t work properly.

≥ The remote control and this unit are using a different code.

(l right, “REMOTE ”)

≥ Is the battery depleted or is the battery inserted incorrectly? (l 4)

The following messages or service numbers may

appear on the unit’s display.

“AUTO OFF”

≥ The unit has been left unused for about 30 minutes and will shut

down within a minute. Press any button to cancel it.

“DL ERROR”

≥ The software download has failed. Press any button to exit.

Please try again later.

≥ The server cannot be found. Press any button to exit. Make sure

that the wireless network is connected to the Internet.

“ERROR”

≥ Incorrect operation is performed. Read the instructions and try

again.

“F ” (“  ” stands for a number.)

≥ There is a problem with this unit.

Note down the displayed number, disconnect the AC mains lead

and consult your dealer.

“FAIL”

≥ Updating or setting has failed. Read the instructions and try again.

“LEVEL 0”

≥ There is no link between this unit and the wireless network router.

Try the following operations:

– Check that the wireless network router is turned on.

– Turn this unit off and on again.

– Reset the wireless network settings. (l 6)

If the problem persists, consult your dealer.

“LEVEL j”

≥ When “D.CONNECT” is set to “ON” the Wi-Fi signal strength

cannot be checked. To check the Wi-Fi signal strength from the

wireless network router, set “D.CONNECT” to “OFF”. (l 9)

“LINKING”

≥ This unit is communicating with the wireless network router

to complete the network settings.

Depending on the wireless network router this process may

take a few minutes. Try moving this unit closer to the wireless

network router.

“NOCONNECT”

≥ This unit is not connected to the network.

Check the network connection. (l 6)

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes. Change

the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK] and

[ , AUX] for more than 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and

[SOUND] for more than 4 seconds.

Bluetooth

Remote control

Messages

SC-NE3_EG~VQT4U54.book 15 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Specifications

* Prospective communication distance

Measurement environment:

Temperature 25 oC / Height 1 m

Measure in “MODE 1”



≥ Specifications are subject to change without notice.

Mass and dimensions are approximate.

≥ Total harmonic distortion is measured by a digital spectrum

analyzer.

∫ GENERAL

Power consumption 14 W

Power consumption in standby mode

Approx. 0.2 W

Power consumption in standby mode

(With “NET STNBY” set to “ON”)

Approx. 4.0 W

Power supply

AC 220 V to 240 V, 50 Hz

Dimensions (WkHkD)

570 mmk206 mmk100 mm

Mass Approx. 2.8 kg

Operating temperature range 0 oC to r40 oC

Operating humidity range

35 % to 80 % RH (no condensation)

∫ AMPLIFIER SECTION

RMS Output Power Stereo mode

Front Ch (both ch driven)

20 W per channel (6 ≠), 1 kHz, 10 % THD

Total RMS Stereo mode power 40 W

∫ SPEAKER SECTION

Type

2 way, 2 speaker system (Bass reflex)

Speaker unit(s)

1. Woofer 8cmk1 per channel

2. Tweeter

2.5 cmk1 per channel

Impedance 6 ≠

Output sound pressure 83.5 dB/W (1 m)

Frequency range 52 Hz to 25 kHz (s16 dB),

75 Hz to 22 kHz (s10 dB)

∫ Wi-Fi/AirPlay SECTION

Wi-Fi

WLAN Standards IEEE802.11b/g

Frequency range 2.4 GHz band

Security WEP (64 bit/128 bit), WPA

, WPA2

WPS version Version 2.0 (WEP not support)

∫ BLUETOOTH SECTION

Version Bluetooth

Ver.2.1 +EDR

Output Class 2 (2.5 mW)

Communication distance About 10 m*

Communication method 2.4 GHz band FH-SS

Correspondence profile A2DP

∫ TERMINALS SECTION

AUX Terminal Stereo, ‰3.5 mm jack

SC-NE3_EG~VQT4U54.book 16 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

About Bluetooth

∫ Frequency band used

≥ This unit uses the 2.4 GHz frequency band.

∫ Certification of this device

≥ This system conforms to frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

≥ The actions below are punishable by law in some

countries:

– Taking apart or modifying the unit.

– Removing specification indications.

∫ Restrictions of use

≥ Wireless transmission and/or usage with all

Bluetooth

equipped devices is not guaranteed.

≥ All devices must conform to standards set by

Bluetooth SIG, Inc.

≥ Depending on the specifications and settings of a

device, it can fail to connect or some operations can

be different.

≥ This system supports Bluetooth

security features.

But depending on the operating environment and/or

settings, this security is possibly not sufficient.

Transmit data wirelessly to this system with caution.

≥ This system cannot transmit data to a Bluetooth

device.

∫ Range of use

≥ Use this device at a maximum range of 10 m. The

range can decrease depending on the environment,

obstacles or interference.

∫ Interference from other devices

≥ This unit may not function properly and troubles such

as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to

other Bluetooth

devices or the devices that use the

2.4 GHz band.

≥ This unit may not function properly if radio waves

from a nearby broadcasting station, etc. is too

strong.

∫ Intended usage

≥ This unit is for normal, general use only.

≥ Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals,

laboratories, etc).

Unit care

Pull out the AC mains lead from the outlet before

maintenance.

∫ Clean this unit with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water tightly to

wipe the dirt, and then wipe it with a dry cloth.

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the

unit. If you discard this unit either by disposal or

transfer, then follow the procedure to return all the

settings to the factory presets to delete the user

settings. (l 14, “To return all settings to the factory

preset”)

≥ The operation history may be recorded in the

memory of this unit.

Licenses

Panasonic bears no responsibility for data and/

or information that is compromised during a

wireless transmission.

AirPlay, the AirPlay logo, iPad, iPhone, iPod, and iPod touch are

trademarks of Apple Inc., registered in the U.S. and other

countries.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi

Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks

or registered marks of the Wi-Fi Alliance.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

The Bluetooth

word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Panasonic

Corporation is under license.

Other trademarks and trade names are those of their respective

owners.

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

SC-NE3_EG~VQT4U54.book 17 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Attaching the unit to a wall (optional)

This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the

wall are strong enough to support the weight of at least 33 kg.

The screws and other items are not supplied as the type and size will vary with each installation.

≥ Refer to step 2 of “Wall mount instructions” for details about the required screws.

≥ Be sure to attach the fall prevention cord as a secondary safety measure.

∫ Supplied accessories

≥ 1 Safety holder

≥ 1 Screw

≥ 2 Wall mount brackets

∫ Additionally required accessories

(commercially available)

≥ 4 Wall mount bracket fixing screws

≥ 1 Safety holder fixing screw

≥ 1 Fall prevention cord*

≥ 1 Screw eye

* Use a cord that is capable of supporting over 33 kg

(with a diameter of about 1.5 mm).

1 Measure and mark the position of the wall mount

brackets (Both sides).

{. Use figures below to identify the screwing positions.

The position to attach the wall mount brackets

Space required

Installation accessories

≥ Keep the safety holder out of reach of children to

prevent swallowing.

≥ Keep the screws out of reach of children to prevent

swallowing.

≥ Keep the wall mount brackets out of reach of children

to prevent swallowing.

Safety precautions

Professional installation is required.

The installation should never be done by any

other than a qualified installation specialist.

PANASONIC DISCLAIMS ANY PROPERTY

DAMAGE AND/OR SERIOUS INJURY,

INCLUDING DEATH RESULTING FROM

IMPROPER INSTALLATION OR INCORRECT

HANDLING.

≥ Be sure to install this unit as indicated within

these operating instructions.

Wall mount instructions

Before installation, turn the unit off and disconnect the

AC mains lead from the mains socket.

252 mm

12.5 mm

300 mm

319 mm

770 mm

83 mm

252 mm

82 mm

169 mm

570 mm

67 mm

122 mm

SC-NE3_EG~VQT4U54.book 18 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

ENGLISH

2 Attach the wall mount bracket to the wall with 2

screws (not supplied). (Both sides)

≥ Use a level to ensure both wall mount brackets are

level.

3 Fix the safety holder onto the unit with the screw

(supplied).

{. Screw tightening torque: 50 N0cm to 70 N0cm.

4 Attach the fall prevention cord (not supplied) to this

unit.

5 Hook the unit securely onto the wall mount

brackets with both hands.

≥ Connect the AC mains lead to the unit before hanging

the unit onto the wall. (l 5)

≥ After hanging the unit, release your hands carefully to

confirm the unit sits securely on the wall.

6 Drive the safety holder fixing screw (not supplied)

to secure the safety holder onto the wall.

≥ Refer to step 2 for requirements before screwing.

7 Attach the fall prevention cord (not supplied) to the

wall.

≥ Make sure that the slack of the cord is minimal.

At least 30 mm

‰7.5 mm to

‰9.4 mm

‰4 mm

Wall mount bracket

Screw

(supplied)

Cord

(not supplied)

Wall

Safety holder fixing screw

(not supplied)

Safety holder

Fixed to the wall

Cord (not supplied)

Screw eye

(not supplied)

Wall

SC-NE3_EG~VQT4U54.book 19 ページ２０１３年１月１６日　水曜日　午前９時３分

VQT4U54

Zasady bezpieczeństwa

Urządzenie

≥ Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Nie należy wystawiać urządzenia na działanie deszczu,

wilgoci, kapanie lub zachlapanie.

– Na urządzeniu nie należy ustawiać żadnych naczyń

zawierających płyny, takich jak wazony.

–Należy korzystać wyłącznie z zalecanych akcesoriów.

– Nie należy demontować obudowy urządzenia.

– Nie należy podejmować prób samodzielnej naprawy.

Naprawę urządzenia należy zlecić wykwalifikowanym

pracownikom serwisu.

–Należy uważać, aby do wnętrza urządzenia nie dostały

się metalowe przedmioty.

– Na urządzeniu nie wolno umieszczać żadnych ciężkich

przedmiotów.

Przewód zasilania

≥ Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

–Należy się upewnić, że napięcie źródła zasilania

odpowiada napięciu podanemu na urządzeniu.

–Dokładnie podłączyć wtyczkę przewodu zasilającego do

gniazda ściennego.

– Nie wolno ciągnąć za przewód, zginać go ani kłaść na nim

ciężkich przedmiotów.

– Nie wolno dotykać wtyczki mokrymi rękami.

– Przy odłączaniu przewodu należy chwycić za wtyczkę.

– Nie wolno podłączać urządzenia do uszkodzonego

gniazda ściennego oraz gdy wtyczka przewodu

zasilającego jest uszkodzona.

≥ Wtyczka zasilania umożliwia odłączenie urządzenia.

Zainstaluj to urządzenie w taki sposób, aby możliwe było

tychmiastowe odłączenie wtyczki zasilania od gniazda

zasilania.

Bateria guzikowa (Bateria litowa)

≥ Niebezpieczeństwo pożaru, wybuchu i poparzenia. Nie ładuj,

rozbieraj, podgrzewaj powyżej 60 xC lub spalaj.

≥ Trzymaj baterię guzikową z dala od dzieci. Nigdy nie wkładaj

baterii guzikowej do ust. Jeżeli zostanie ona połknięta,

skontaktuj się z lekarzem.

Urządzenie

≥ Nie należy umieszczać na urządzeniu źródeł otwartego

ognia, takich jak zapalone świece.

≥ To u rządzenie może odbierać zakłócenia wywołane użyciem

telefonu komórkowego. Jeżeli takie zakłócenia wystąpią,

wskazane jest zwiększenie odległości pomiędzy

urządzeniem a telefonem komórkowym.

≥ Urządzenie jest przeznaczone do używania w klimacie

umiarkowanym.

Wybór miejsca

≥ Urządzenie należy ustawić na równej powierzchni.

≥ Aby ograniczyć niebezpieczeństwo pożaru, porażenia

prądem lub uszkodzenia urządzenia,

– Niniejszego urządzenia nie należy instalować lub

umieszczać w szafce na książki, zabudowanej szafce lub

innej ograniczonej przestrzeni, w celu zapewnienia dobrej

wentylacji.

– Nie należy zasłaniać otworów wentylacyjnych urządzenia

gazetami, obrusami, zasłonami i podobnymi

przedmiotami.

–Urządzenie należy chronić przed bezpośrednim

działaniem promieni słonecznych, wysoką temperaturą,

wysoką wilgotnością oraz nadmiernymi drganiami.

Bateria guzikowa (Bateria litowa)

≥ Istnieje niebezpieczeństwo wybuchu w przypadku, gdy

baterie zostaną nieprawidłowo włożone. Baterie należy

wymieniać wyłącznie na baterie typu zalecanego przez

producenta.

≥ Wkładając, pamiętaj o zachowaniu prawidłowej

biegunowości.

≥ Nieprawidłowe obchodzenie się z bateriami może prowadzić

do wycieku elektrolitu i może być także przyczyną pożaru.

– Baterię należy wyjąć, jeżeli pilot nie będzie używany przez

dłuższy czas. Należy ją przechowywać w chłodnym,

ciemnym miejscu.

– Nie ogrzewaj i nie wrzucaj do ognia.

– Nie należy pozostawiać baterii przez dłuższy czas w

samochodzie z zamkniętymi drzwiami i oknami

wystawionym na bezpośrednie działanie promieni

słonecznych.

≥ W przypa

dku utylizacji baterii, należy się skontaktować z

lokalnymi władzami lub ze sprzedawcą celem uzyskania

informacji o prawidłowym sposobie postępowania.

OSTRZEËENIE UWAGA

Oznaczenia identyfikacyjne produktu znajdują się na spodzie urządzenia.

Deklaracja zgodności

Niniejszym “Panasonic Corporation” deklaruje, że ten produkt jest zgodny z istotnymi wymaganiami i innymi odnośnymi

postanowieniami dyrektywy 1999/5/WE.

Klienci mogą pobrać oryginalną deklarację zgodności naszych produktów z serwera deklaracji zgodności:

http://www.doc.panasonic.de

Kontakt się z autoryzowanym przedstawicielem: Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Niemcy

Ten produkt jest przeznaczony dla użytkownika ogólnego. (Kategoria 3)

Niniejszy produkt jest przeznaczony do podłączenia do punktu dostępowego 2,4 GHz WLAN.

1731

SC-NE3_EG~VQT4U54.book 20 ページ２０１３年１月１６日　水曜日　午前９時３分

Stránka sa načítava...

Panasonic SCNE3EG Návod na používanie

Značka: Panasonic

Model: SCNE3EG

Kategória: Bluetooth hudobné prijímače

Typ: Návod na používanie

Stiahnite si PDF

správa

v iných jazykoch

English: Panasonic SCNE3EG Operating instructions
polski: Panasonic SCNE3EG Instrukcja obsługi

Panasonic SCNE3EG Návod na používanie

Panasonic SCNE3EG Návod na používanie

v iných jazykoch

Súvisiace články

Ostatné dokumenty