aeno.com/documents 11
• The brush head vibrates very weakly. Possible Cause: The attachment is too
tight on the handle of the device. Solution to the problem: make sure that
there is a small gap at the mating point (11), about 1 mm.
• Short working time after fully charged. Possible cause: The device has not
been used for more than 6 months, so the battery may not hold a charge
well. Solution: contact the service center and replace the device battery.
ATTENTION! If none of the possible remedies resolves your problem, contact
your supplier or service center. Do not disassemble the device or try to repair it
yourself.
Recycling information
These symbols indicate that you must follow the Waste Electrical
and Electronic Equipment (WEEE) and Waste Battery and Battery
Regulations when disposing of the device, its batteries and
accumulators, and its electrical and electronic accessories.
According to the rules, this equipment must be disposed of
separately at the end of its service life. Do not dispose of the device,
its batteries and accumulators, or its electrical and electronic
accessories together with unsorted municipal waste, as this will
harm the environment.
To dispose of this equipment, it must be returned to the point of
sale or turned in to a local recycling facility.
You should contact your local household waste disposal service for details.
ASBISc reserves the right to modify the device and to make edits and changes to this document
without prior notice to users.
The warranty period and service life shall be 2 years as from the date of purchase of the device.
Manufacturer: ASBISc Enterprises PLC, Lapetou, 1, Agios Athanasios, 4101 Limassol, Cyprus. Made in
China. For current information and details on the device description and specification, as well as
connection process, certificates, warranty, and quality issues, see relevant Installation and
Operation Manuals available for downloading at aeno.com/documents. All trademarks and names
herein are the property of their respective owners.