16572208_ed3 EN-1
EN
Product Safety Information
Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For Additional information refer to Air Drills Product Safety Information Manual Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Models Style
Free
Speed
Chuck
Capacity
Sound Level dB(A)
(ISO15744)
Sound Level dB(A)
(ANSI S5.1-1971)
Vibration
(m/s²)
(ISO28927)
rpm inch (mm)
† Pressure (L
p
) ‡ Power (L
w
) Pressure
Power
(ISO3744)
Level *K
5AJST4 Pistol 4500 1/4 (6) --- --- --- --- 3.5 1.3
5AJST4-EU Pistol 4500 1/4 (6) --- --- 74.8 --- 3.5 1.3
5AKST4 Pistol 3000 1/4 (6) --- --- --- --- 3.5 1.3
5AKST4-EU Pistol 3000 1/4 (6) --- --- 77.6 --- 3.5 1.3
5ALST4 Pistol 2200 1/4 (6) --- --- --- --- 3.5 1.3
5ALST4-EU Pistol 2200 1/4 (6) --- --- 75.6 --- 3.5 1.3
5ANST6 Pistol 1000 3/8 (10) --- --- --- --- 20.1 3.6
5ANST6-EU Pistol 1000 3/8 (10) --- --- 74.8 --- 20.1 3.6
5RALST6 Pistol 2000 3/8 (10) --- --- --- --- 3.5 1.3
5RALST6-EU Pistol 2000 3/8 (10) 79.4 90.4 --- --- 3.5 1.3
5RANST6 Pistol 900 3/8 (10) --- --- --- --- 20.1 3.6
5RANST8 Pistol 900 1/2 (13) --- --- --- --- 20.1 3.6
5RANST8-EU Pistol 900 1/2 (13) 79.0 90.0 --- --- 20.1 3.6
5LJ1 Inline 4800 1/4 (6) --- --- --- --- <2.5 ---
5LJ1-EU Inline 4800 1/4 (6) --- --- 75.6 --- <2.5 ---
5LK1 Inline 3100 1/4 (6) --- --- --- --- <2.5 ---
5LK1-EU Inline 3100 1/4 (6) --- --- 77.6 --- <2.5 ---
5LL1 Inline 2300 1/4 (6) --- --- --- --- 8.8 2.7
5LL1-EU Inline 2300 1/4 (6) 72.3 --- --- --- 8.8 2.7
5LN3 Inline 1000 3/8 (10) --- --- --- --- 8.8 2.7
5LN3-EU Inline 1000 3/8 (10) --- --- 78.6 --- 8.8 2.7
† K
pA
= 3dB measurement uncertainty * K = Vibration measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain condensate
from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a properly sized Safety
Air Fuse upstream of hose and use an anti-whip device across any hose coupling without internal shut-
o, to prevent hose whipping if a hose fails or coupling disconnects. See drawing 16575656 and table
on page 2. Maintenance frequency is shown in a circular arrow and dened as h=hours, d=days, and
m=months of actual use. Items identied as:
1. Air lter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-o valve 10. Grease - during assembly
5. Hose diameter 11. Grease - through tting
6. Thread size