Portuguese
1. Ligue o cabo da tomada de 3,5mm verde ao conector Line in
2. Ligue o cabo da tomada de 3,5mm com a marca L ao conector
Satellite out
3. Ligue o conector mini Din preto à entrada Control in
4. Ligue o cabo da tomada de 3,5mm verde à placa de som do
PC ou a outra fonte de som
5. Ligue a fonte de alimentação à entrada Power in
6. Ligue o cabo de alimentação à corrente eléctrica
7. Ligue/desligue o sistema utilizando o botão Power no painel
direito do satélite
8. Regule o sistema, utilizando a placa de som do PC ou outra
fonte de som
9. Regule o volume, utilizando +/- no painel central de satélite
10. O nível de subwoofer pode ser regulado com o botão Bass control.
Nota:
1. Introduza apenas a ficha na tomada de CA depois de efectuar
todas as ligações.
2. As entradas estão de acordo com os códigos de cor do PC
2002 (verde para a entrada E/D)
Slowaskia
1. Zapojte zelený kábel s 3,5mm jackom do konektora Line in.
2. Zapojte kábel oznaèený písmenom L s3,5mm jackom do
konektora Satellite out.
3. Zapojte èierny mini Din konektor do Din vstupu, oznaèeného
Control in.
4. Zapojte zelený kábel s 3,5mm jackom do zvukovej karty PC
alebo iného zdroja.
5. Pripojte sieový zdroj do vstupu Power in.
6. Zastrète sieový kábel do sieovej zásuvky.
7. Zapnite/vypnite systém tlaèidlom Power, umiestneným na
pravom paneli satelitu.
8. Nalaïte systém pomocou zvukovej karty PC alebo iného
zdroja.
9. Nastavte hlasitos pomocou +/ na centrálnom paneli satelitu.
10.Hlasitos subwoofera mono nastavi gombíkom Bass
control.
Poznámka:
1. Nezasúvajte zástrèku do zásuvky, kým nie sú pripojené
vetky káble.
2. Vstupy zodpovedajú farebnému kódovaniu PC 2002 (zelený,
èierny, oranový).
Czech
1. Pøipojte zelený kabel s konektorem jack 3,5 do zdíøky Line In (linkový
vstup).
2. Pøipojte kabel L s konektorem jack 3,5 do zdíøky Satellite out (výstup
satelitní soustavy).
3. Pøipojte èerný minikonektor Din do zdíøky Din Control In (øídící vstup).
4. Pøipojte zelený kabel s konektorem jack 3,5 k poèítaèové zvukové
kartì nebo jinému zdroji zvuku.
5. Pøipojte zdroj napájení do zdíøky Power In (vstup napájení).
6. Pøipojte napájecí kabel do zásuvky.
7. Stisknutím tlaèítka Power (napájení) na panelu pravého satelitního
reproduktoru zapnìte nebo vypnìte systém.
8. Pomocí poèítaèové zvukové karty nebo jiného zdroje zvuku systém
vylaïte.
9. Pomocí tlaèítek +a na panelu støedového satelitního reproduktoru
nastavte hlasitost.
10.Pomocí tlaèítka Bass Control (nastavení hloubky) lze nastavit
hlasitost hloubkového reproduktoru.
Poznámka:
1. Napájecí kabel pøipojte do zásuvky a po provedení vech zapojení.
2. Barevné rozliení vstupù odpovídá kódování PC 2002 (zelená, pro
vstup levého a pravého kanálu).
Hungary
1. Csatlakoztassa a zöld 3,5 mm-es csatlakozókábelt a Line in
csatlakozóba.
2. Csatlakoztassa az L-jelöléssel ellátott 3,5 mm-es csatlakozót a
Satellite out csatlakozóba.
3. Csatlakoztassa a fekete mini DIN-csatlakozót a Control in DIN
bemenetbe.
4. Csatlakoztassa a zöld 3,5 mm-es csatlakozókábelt a számítógép
hangkártyájába vagy egyéb hangforrásba.
5. Csatlakoztassa a hálózati tápfeszültség kábelt a Power input
bemenetbe.
6. Illessze a tápfeszültség-dugaszt a dugaszoló-aljzatba.
7. A jobboldali egységen található Power gomb segítségével
kapcsolja be / ki arendszert.
8. Végezze el a rendszer hangolását PC-hangkártya vagy egyéb
hangforrás segítségével.
9. Állítsa be a hangerõt a középsõ egységen található +/-
segítségével.
10. A mélysugárzót a Bass control gomb segítségével állíthatja be.
Megjegyzés:
1. Ne illessze a tápfeszültség dugót a változó áramú (AC)
dugaszoló-aljzatba addig, amíg nem végezte el a szükséges
csatlakoztatásokat.
2. A bemenetek jelölése a PC 2002 színkódolásnak megfelelõen
történt (zöld szín jelöli a bal / jobb bemeneteket).
Turkish
1. Yeþil 3,5 mm jak kablosunu Hat giriþ (Line in) konektörüne takýn
2. L iþaretli 3,5 mm jak kablosunu Uydu çýkýþ (Satellite out)
konektörüne takýn
3. Siyah mini Din konektörünü Kontrol giriþ (Control in) Din giriþine
takýn
4. Yeþil 3,5 mm jak kablosunu PC ses kartýna veya diðer ses
kaynaðýna takýn
5. Güç kaynaðýný Güç giriþ (Power in) giriþine takýn.
6. Güç Kaynaðýný prize takýn
7. Sað uydu paneli üzerindeki Güç (Power) düðmesini kullanarak
sistemi açabilir/kapatabilirsiniz
8. PC ses kartý veya diðer ses kaynaðýný kullanarak sistemi ayarlayýn
9. Sesi orta uydu paneli üzerindeki +/- düðmesini kullanarak
ayarlayýn
10. Subwoofer düzeyi Bas kontrol (Bass control) düðmesiyle
ayarlanabilir.
Not:
1. Baðlantýlar tamamlanana kadar fiþi AC prizine takmayýn.
2. Giriþler PC 2002 renk kodlarýný izler (Sol/Sað giriþi için yeþil)
Important notes for users in the U.K.
Mains plugMains plug
Mains plugMains plug
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
11
11
1 Remove fuse cover and fuse.
22
22
2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
33
33
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note:Note:
Note:Note:
Note:
The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plugHow to connect a plug
How to connect a plugHow to connect a plug
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the
colour markings identifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Copyright in the U.K.Copyright in the U.K.
Copyright in the U.K.Copyright in the U.K.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer 's Protection Acts 1958 to 1972.
IMPORTANT SAFETY INSTRUCTIONS - Read before operating equipment
For US/Canada only
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
1. Read these instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Keep these instructions - The safety and operating instructions
should be retained for future reference.
3. Heed all warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow all instructions - All operating and use instructions should
be followed.
5. Do not use this apparatus near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool, etc.
6. Clean only with a damp cloth. The appliance should be cleaned
only as recommended by the manufacturer.
7. Install in accordance with the manufacturers Instructions. Do
not block any of the ventilation openings. For example, the
appliance should not be situated on a bed, sofa, rug, or similar surface
or placed in a built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings.
8. Do not Install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. Match wide blade of Plug to
wide slot, fully insert. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particulary
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Warning! To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
EL 4562-E004: 99/3
http://www.philips.com/pcstuff
Deutschland
Hiermit wird bescheinigt, daß dieses Gerät in Übereinstimmung mit
den Bestimmungen der Amtsblattverfügung 1046/1984 funkentstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes
angezeigt und die Berechtigung zur Überprüfung der Serie auf
Einhaltung der Bestimmungen eingeräumt.
NorNor
NorNor
Nor
gege
gege
ge
Typeskilt finnes på apparatens underside.
Observer:Observer:
Observer:Observer:
Observer:
Nettbryteren er sekundert innkoplet. Den innebygde netdelen
er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
AC
Polarized Plug
The socket-outlet shall be installed near the equipment and shall be easily accessible.
4399 294 61520_Rev1
Multimedia SpeakMultimedia Speak
Multimedia SpeakMultimedia Speak
Multimedia Speak
er Systemer System
er Systemer System
er System
MMS 430MMS 430
MMS 430MMS 430
MMS 430