NEC MultiSync® LCD1525MBK Návod na obsluhu

Typ
Návod na obsluhu

Táto príručka je tiež vhodná pre

MultiSync LCD1525M
UÏivatelská pfiíruãka
Declaration
Declaration of the Manufacturer
We hereby certify that the colour monitor
MultiSync LCD1525M (LA-1528HMW)
(LA-1528HMW-BK)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 55024
and marked with
NEC-Mitsubishi Electric Visual Systems, Corp.
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
For the Customer to use in
U.S.A. or Canada
Canadian Department of Communications
Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouiller du Canada.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety
Regulations according to C.S.A. C22.2 #950.
Ce produit porte la marque ‘C-UL et se conforme aux règlements de
sûrele Canadiens selon CAN/CSA C22.2 No. 950.
FCC Information
1. Use the attached specified cables with the MultiSync LCD1525M
colour monitor so as not to interfere with radio and television
reception.
(1) The power supply cord you use must have been approved by
and comply with the safety standards of U.S.A., and meet the
following condition.
Power supply cord Non shield type, 3-conductor
Length 1.8 m
Plug shape
(2) Please use the supplied AC Adapter which is include in stand.
(3) Shielded video signal cable.
Use of other cables and adapters may cause interference with
radio and television reception.
(4) Please use supplied USB cable.
(5) Please use supplied audio cable.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for
help.
If necessary, the user should contact the dealer or an experienced
radio/television technician for additional suggestions. The user may
find the following booklet, prepared by the Federal Communications
Commission, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C., 20402, Stock No. 004-
000-00345-4.
DECLARATION OF
CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
U.S. Responsible party: NEC-Mitsubishi Electronics
Display of America, Inc.
Address: 1250 N. Arlington Heights Road
Itasca, Illinois 60143-1248
Tel. No.: (630)467-3000
Type of Product: Computer Monitor
Equipment Classification: Class B Peripheral
Models: MultiSync LCD1525M
We hereby declare that the equipment specified above conforms
to the technical standards as specified in the FCC Rules.
LA-1528HMW-BK only
TCO’95
Congratulations! You have just
purchased a TCO95 approved and
labelled product! Your choice has
provided you with a product developed
for professional use. Your purchase has
also contributed to reducing the burden
on the environment and also, to the
further development of environmentally
adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during the manufacturing.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
conventional electricity generation have a negative effect on the
environment (acidic and climate-influencing emissions, radioactive
waste, etc.), it is vital to conserve energy. Electronics equipment in
offices consume an enormous amount of energy since they are often left
running continuously.
What does labelling involve?
This product meets the requirements for the TCO95 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees),
Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and NUTEK (The National Board for Industrial and Technical
Development in Sweden).
The requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electrical and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands concern restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental plan which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
On the back page of this folder, you will find a brief summary of the
environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development Unit
S-114 94 Stockholm
Sweden
Fax: +46 8 782 92 07
Current information regarding TCO95 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
TCO95 is a co-operative project between TCO (The Swedish
Confederation of Professional Employees), Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and NUTEK (The
National Board for Industrial and Technical Development in Sweden).
Environmental Requirements
Brominated flame retardants
Brominated flame retardants are present in printed circuit boards,
cables, wires, casings and housings. In turn, they delay the spread of
fire. Up to thirty percent of the plastic in a computer casing can consist
of flame retardant substances. These are related to another group of
environmental toxins, PCBs, which are suspected to give rise to similar
harm, including reproductive damage in fisheating birds and mammals,
due to the bio-accumulative* processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus
development may occur.
TCO95 directive requires that plastic components weighing more than
25 grams must not contain organically bound chlorine and bromine.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses,
causes lead poisoning.
TCO95 requirement permits the inclusion of lead since no replacement
has yet been developed.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colourgenerating layers of certain computer displays. Cadmium
damages the nervous system and is toxic in high doses.
TCO95 requirement states that batteries may not contain more than
25 ppm (parts per million) of cadmium. The colourgenerating layers of
display screens must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches and back-
light system. Mercury damages the nervous system and is toxic in high
doses.
TCO95 requirement states that batteries must not contain more than
25 ppm (parts per million) of mercury. It also demands that no mercury
is present in any of the electrical or electronics components concerned
with the display unit except the back-light system.
CFCs (freons)
CFCs (freons) are sometimes used for washing printed circuit boards
and in the manufacturing of expanded foam for packaging. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere,
causing increased ultraviolet light to enter the earths atmosphere with
consequent increased risks of skin cancer (malignant melanoma).
The relevant TCO95 requirement: Neither CFCs nor HCFCs may be
used during the manufacturing of the product or its packaging.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
LA-1528HMW only
TCO’99
Congratulations! You have just purchased a
TCO99 approved and labelled product! Your
choice has provided you with a product
developed for professional use. Your purchase
has also contributed to reducing the burden
on the environment and also to the further
development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g.
acidic and climate-influencing emissions, radioactive waste), it is vital to
save energy. Electronics equipment in offices is often left running
continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO99 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by
the.TCO (The Swedish Confederation of Professional Employees),
Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electric and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental policy which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements
met by this product. The complete environmental criteria document may
be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Current information regarding TCO99 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. Their purpose is to prevent, or at least to delay
the spread of fire. Up to 30% of the plastic in a computer casing can
consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related
to another group of environmental toxins, PCBs. Both the flame
retardants containing bromine or chloride and the PCBs are suspected
of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bioaccumulative* processes.
Flame retardants have been found in human blood and researchers fear
that disturbances in foetus development may occur.
The relevant TCO99 directive requires that plastic components weighing
more than 25 grams must not contain flame retardants with organically
bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colourgenerating
layers of certain computer displays. Cadmium damages the nervous
system and is toxic in high doses. The relevant TCO99 requirement
states that batteries, the colour-generating layers of display screens and
the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It
damages the nervous system and is toxic in high doses. The relevant
TCO99 requirement states that batteries must not contain any mercury.
It also demands that mercury is not present in any of the electrical or
electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO99 requirement states that neither CFCs nor HCFCs
may be used during the manufacture and assembly of the product.
CFCs.(freons) are sometimes used for washing printed circuit boards.
CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased ultraviolet light to enter the earths
atmosphere with increased risks of skin cancer (malignant melanoma)
as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses
causes lead poisoning. The relevant TCO99 requirement permits the
inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
ENERGYSTAR is a U.S. trademark,
As an ENERGYSTAR
®
Partner, NEC-Mitsubishi Electronics Display of America, Inc. has
determined that this product meets the ENERGYSTAR guidelines for energy efficiency. The
ENERGYSTAR emblem does not represent EPA endorsement of any product or service.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of
International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
âesky-1
âesky
Úvod k monitoru NEC
MultiSync LCD1525M
Gratulujeme k nákupu monitoru LCD s vûrn˘mi barvami NEC
MultiSyncLCD1525M!
Vût‰í kompatibilita
Vzhledem k tomu, Ïe monitor MultiSync LCD je ãistû analogov˘ monitor,
nevyÏaduje Ïádné speciální grafické karty ani rozhraní pro pfievod
analogového zobrazení na digitální, a mÛÏe pfiijímat pfiímo signál RGB.
Zmen‰en˘ pÛdorys
Poskytuje ideální fie‰ení pro prostfiedí vyÏadující prvotfiídní kvalitu obrazu,
ale s omezen˘mi poÏadavky na velikost a hmotnost. Mal˘ pÛdorys
anízká hmotnost monitoru umoÏÀují snadnou manipulaci a pfiemísÈování.
Systém nastavení barev
UmoÏÀuje upravit barvy na obrazovce a pfiizpÛsobit pfiesnost barev
monitoru nejrÛznûj‰ím normám.
Ovladaãe OSM (On-Screen Manager)
UmoÏÀují rychlé a snadné nastavení ve‰ker˘ch zobrazovacích prvkÛ
pomocí nabídky na obrazovce.
Funkce ErgoDesign
Dokonalej‰í ergonomie zlep‰uje pracovní prostfiedí, chrání zdraví
uÏivatele a ‰etfií peníze. Jedná se napfiíklad o ovladaãe OSM pro rychlé
asnadné úpravy obrazu, naklápûcí/otoãná základna pro nastavení
optimálního úhlu sledování, mal˘ pÛdorys a splnûní smûrnic MPRII pro
niωí vyzafiování.
Plug and Play (k okamÏitému pouÏití)
¤e‰ení Microsoft
®
v systému Windows
®
umoÏÀuje snadné nastavení
ainstalaci, protoÏe vlastnosti monitoru se pfiená‰í automaticky pfiímo do
poãítaãe (napfi. velikost obrazu, podporované rozli‰ení). V˘kon monitoru
se automaticky optimalizuje.
âesky-2
Systém IPM (Intelligent Power Manager –
inteligentní správa energie)
Poskytuje moderní zpÛsoby úspory energie, které umoÏÀují monitoru
pfiejít do reÏimu niωí spotfieby energie v dobû, kdy je zapnut˘, ale
nepouÏívá se. Tato funkce uspofií dvû tfietiny v˘dajÛ na napájení monitoru
a sníÏí se vyzafiování a náklady na klimatizaci pracovního prostfiedí.
Multiple Frequency Technology (multifrekvenãní
technologie)
Automaticky sladí frekvenci monitoru a grafické karty a zároveÀ
zobrazuje poÏadované rozli‰ení.
Funkce FullScan
Tato funkce umoÏÀuje pfii vût‰inû rozli‰ení vyuÏívání celé plochy
obrazovky smaximální plochou obrazu.
âesky-3
âesky
Obsah dodávky
Balení s nov˘m monitorem LCD NEC MultiSync by mûlo obsahovat
následující poloÏky:
Monitor LCD NEC MultiSync 1525M,
napájecí ‰ÀÛru,
kabel pro video signál,
audio kabel,
kabel USB,
uÏivatelskou pfiíruãku.
CD-ROM (zahrnuje kompletní uÏivatelskou pfiíruãku ve formátu PDF).
PÛvodní karton a balicí materiál si uschovejte pro pfiípadnou pfiepravu
monitoru.
Monitor LCD NEC MultiSync 1525M
monitor s kabelem pro video signál
SíÈová ‰ÀÛra Audio kabel
Kabel USB
âesky-4
Provozní pokyny
Bezpeãnostní opatfiení a údrÏba
Chcete-li dosáhnout optimálního provozu, postupujte pfii uvádûní
monitoru LCD MultiSync do provozu a pouÏívání podle následujících
pokynÛ:
MONITOR NEOTVÍREJTE. Uvnitfi monitoru nejsou Ïádné souãástky,
které by si mohl uÏivatel sám opravit. Pfii otvírání nebo odstraÀování
krytÛ se vystavujete nebezpeãí úrazu elektrick˘m proudem a jin˘m
rizikÛm. Ve‰keré zásahy tohoto druhu pfienechejte odbornému
personálu.
Zajistûte kolem monitoru odpovídající odvûtrávání, aby se nepfiehfiíval.
Nezakr˘vejte vûtrací otvory a neumísÈujte monitor do blízkosti topidel
a jin˘ch tepeln˘ch zdrojÛ. Nepokládejte na monitor Ïádné pfiedmûty.
NeumisÈujte na monitor Ïádné pfiedmûty a nepouÏívejte monitor
venku.
Dbejte, aby se do monitoru nedostaly tekutiny a nepouÏívejte ho
vblízkosti vody.
Do mezer obalu nezasouvejte Ïádné pfiedmûty. Mohly by se dotknout
nebezpeãn˘ch souãástí pod napûtím, coÏ mÛÏe zpÛsobit úraz
elektrick˘m proudem, poÏár nebo selhání zafiízení.
Na napájecí ‰ÀÛru nepokládejte tûÏké pfiedmûty. Po‰kození izolace
mÛÏe zpÛsobit úraz elektrick˘m proudem nebo poÏár.
NeumísÈujte v˘robek na ‰ikmé ani nestabilní vozíky, stojany nebo
stoly; monitor se mÛÏe pádem váÏnû po‰kodit.
Konektor napájecí ‰ÀÛry je hlavním prostfiedkem pro odpojení
systému od pfiívodu elektrického napûtí. Monitor je tfieba nainstalovat
blízko elektrické zásuvky, k níÏ je snadn˘ pfiístup.
PouÏíváte-li pro provoz monitoru MultiSync napájení 100-240 V,
pouÏijte také odpovídající napájecí ‰ÀÛru, která odpovídá napûtí
zásuvky stfiídavého proudu. Napájecí ‰ÀÛra musí b˘t schválena
amusí vyhovovat bezpeãnostním pfiedpisÛm platn˘m vpfiíslu‰né
zemi.
Pfii dopravû a manipulaci zacházejte se zafiízením opatrnû. Karton
abalicí prvky si uschovejte.
Fluorescenãní trubice v monitoru LCD obsahuje rtuÈ. Pfii likvidaci této
trubice se fiiìte normami a pfiedpisy místních úfiadÛ.
Neoh˘bejte síÈovou ‰ÀÛru.
âesky-5
âesky
NepouÏívejte monitor na pfiíli‰ teplém, vlhkém nebo pra‰ném místû.
Nezakr˘vejte vûtrací otvory na monitoru.
JestliÏe monitor praskne, nedot˘kejte se tekut˘ch krystalÛ.
VníÏe popsan˘ch pfiípadech je nutno okamÏitû odpojit monitor ze sítû
apfiivolat kvalifikovaného servisního technika:
Dojde kpo‰kození napájecí ‰ÀÛry.
Do monitoru se dostane kapalina nebo cizí pfiedmûty.
Monitor byl vystaven de‰ti nebo vodû.
Monitor upadne nebo se po‰kodí jeho obal.
SPRÁVN¯M UMÍSTùNÍM A NASTAVENÍM
MONITORU MÒÎETE P¤EDEJÍT ÚNAVù OâÍ,
BOLESTEM RAMEN A ·ÍJE. P¤I UMISËOVÁNÍ
MONITORU POSTUPUJTE PODLE
NÁSLEDUJÍCÍCH POKYNÒ:
Pro dosaÏení optimálního v˘konu nechte monitor 20 minut zahfiát.
Umístûte monitor do takové v˘‰ky, abyste horní ãást obrazovky mûli
mírnû pod úrovní oãí. Pohled na stfied obrazovky by mûl smûfiovat
mírnû dolÛ.
Doporuãená minimální vzdálenost monitoru od oãí je 40 cm,
maximální 70 cm. Optimální vzdálenost od monitoru
MultiSyncLCD1525M je 53 cm.
Pfii práci zamûfiujte zrak pravidelnû na nûjak˘ pfiedmût vzdálen˘
nejménû 6 m. âasto mrkejte.
Umístûte monitor vúhlu asi 90° koknu a jin˘m svûteln˘m zdrojÛm
tak, aby se neodráÏely na obrazovce. Monitor sklopte tak, aby se
naobrazovce neodráÏela stropní svûtla.
Pokud se nelze odrazu svûtla na obrazovce vyhnout, pouÏívejte filtr
proti odleskÛm.
Povrch monitoru ãistûte jemnou látkou, která nepou‰tí vlákna.
Rozhodnû nepouÏívejte ãisticí roztoky nebo ãistiãe skel!
Jas a kontrast nastavte tak, aby byla zaji‰tûna optimální ãitelnost.
PouÏívejte stojan na doklady, kter˘ umístíte vblízkosti obrazovky.
Obrazovku nebo referenãní materiál, se kter˘m pracujete, umístûte
pfied sebe, abyste pfii psaní museli co nejménû otáãet hlavou.
Rozhodnû nezobrazujte nehybné vzory na dlouhou dobu, abyste
zabránili dosvitu obrazu (magnetické zpoÏdûní obrazu).
Choìte pravidelnû na prohlídky koãnímu lékafii.
âesky-6
Instalace
Bûhem pfiipojení monitoru MultiSync LCD1525M ke stávajícímu systému
postupujte podle následujících pokynÛ:
1. Vypnûte napájení poãítaãe.
2. IBM PC: V poãítaãi pfiipojte odpovídající 15 kolíkovou mini-zástrãku
D-SUB signálního kabelu ke konektoru grafické karty (obr. A.1).
Dotáhnûte v‰echny ‰rouby.
Macintosh: Pfiipojte kabelov˘ adaptér Macintosh monitoru
LCD1525M k poãítaãi (obr. B.1). Zapojte 15kolíkovou minizástrãku
D-SUB signálního kabelu do adaptéru Macintosh monitoru MultiSync
LCD1525M (obr. B.1). Dotáhnûte v‰echny ‰rouby.
3. Sejmûte kryt konektoru a kabelu. V poãítaãi pfiipojte 15kolíkovou mini-
zástrãku D-SUB kabelu pro video signál k odpovídajícímu konektoru
na zadní stranû monitoru (obr. C.1). Umístûte kabel pro video signál
pod svorku B.
4. Pfiipojte audio kabel ke vstupu „AUDIO INPUT“ na zadní stranû
monitoru a druh˘ konec k v˘stupu „Audio out“ na poãítaãi. Umístûte
audio kabel pod svorku C (obr. D.1). Opût nasaìte kryt konektoru
akryt kabelu.
5. K v˘stupu „Headphones“ na pfiední stranû rámeãku monitoru
oznaãeného „
“ je moÏné pfiipojit sluchátka (obr. E.1). Jsou-li
pfiipojená sluchátka, bude zvuk z reproduktorÛ potlaãen. Sluchátka
zakoupíte u místního prodejce elektroniky.
6. Chcete-li pouÏívat kabel USB, pfiipojte konektor typu B k vstupnímu
portu USB na zadní stranû monitoru a konektor typu A k v˘stupnímu
portu USB na poãítaãi (obr. F.1) PouÏíváte-li kabel ze zafiízení USB,
pouÏijte jeden z v˘stupních portÛ na boku monitoru (obr. G.1).
POZNÁMKA: Nesprávné kabelové spojení mÛÏe mít za následek
nerovnomûrn˘ provoz, sníÏení kvality zobrazení nebo
po‰kození zobrazovacích souãástek modulu LCD a mÛÏe
zkrátit Ïivotnost modulu.
7. Pfiipojte napájecí ‰ÀÛru k monitoru MultiSync série LCD a druh˘ konec
zapojte do elektrické zásuvky (obr. H.1). Napájecí ‰ÀÛra musí b˘t
schválena a musí vyhovovat bezpeãnostním pfiedpisÛm platn˘m
vpfiíslu‰né zemi. (Typ H05VV-F se nesmí pouÏívat ve Velké Británii)
8. Zapnûte monitor (obr. I.1) a poãítaã.
âesky-7
âesky
9. K dokonãení nastavení monitoru LCD MultiSync pouÏijte následující
ovladaãe OSM:
• automatické upravení kontrastu
• automatické sefiízení
Úpln˘ popis tûchto ovladaãÛ OSM je uveden v kapitole Ovladaãe v této
uÏivatelské pfiíruãce.
POZNÁMKA: Vyskytnou-li se potíÏe, pfieãtûte si kapitolu OdstraÀování
problémÛ dále vtéto pfiíruãce.
âesky-8
Obrázek A.1 Obrázek B.1
Obrázek C.1
Obrázek D.1
Svorka A
Svorka B
Svorka C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

NEC MultiSync® LCD1525MBK Návod na obsluhu

Typ
Návod na obsluhu
Táto príručka je tiež vhodná pre

V iných jazykoch