Kernau KFD 8503.1 Návod na obsluhu

  • Prečítal som si používateľskú príručku pre sušičku prádla KERNAU KFD 8503.1. Som pripravený odpovedať na vaše otázky o jej funkciách, programoch, údržbe a riešení problémov. Príručka obsahuje detailné informácie o príprave prádla, nastavení programu, čistenie filtrov a výmenníka tepla, ako aj riešenie bežných problémov.
  • Ako pripravím prádlo na sušenie v sušičke?
    Čo robiť, ak je prádlo po ukončení programu stále vlhké?
    Ako často treba čistiť filtre na vlákna?
    Ako často treba čistiť výmenník tepla?
43
Suitable for drying
in a dryer Does not need ironing Sensitive/Delicate
drying
Not suitable for drying
in a dryer
No drying Do not
dry-clean At any temperature At high temperatures
At medium
tempreratures At low temperatures Heatless Hang to dry
Spread to dry Hang wet to dry Spread in shadow
to dry
Suitable for dry
cleaning
Do not dry thin, multi-layer or thick-layer fabrics together as they dry at different levels. For this reason, dry
clothes together that have the same structure and fabric type. This way, you can get an even drying result. If
you think that the laundry is still wet, you can select a time programme for additional drying.
Please dry your big (like duvets) and small sizes of laundries seperately in order to not to have a damp
laundries
IMPORTANT
Delicate fabrics, embroided fabrics, woolen/silk fabrics, clothes made of delicate and expensive
fabrics, airtight clothes and tulle curtains are not suitable for drying in the dryer.
PREPARING THE LAUNDRY TO BE DRIED
FIRE
Risk of explosion and fire!
Remove all objects from pockets such as lighters and matches.
ATTENTION
The drum of the dryer and the fabrics may get damaged
The clothes may have become entangled during the washing process. Separate them from each
other before placing them in the dryer.
Remove all objects in the pockets of the clothes and apply the following:
The fabric belts, apron laces etc. to each other or use a laundry bag.
Lock the zips, clasps and fasteners, do up the buttons of covers.
44
To get the best drying result, sort the laundry according to the textile type and drying programme.
Remove clips and similar metal parts from the clothes.
Woven goods such as t-shirts and knit clothes generally shrink in the first drying. Use
a protective programme.
Do not over-dry synthetics. This will cause creases.
When washing the laundry to be dried, adjust the amount of softener according to the data from
the manufacturer of the washing machine
LOAD CAPACITY
Follow the instructions in the „Programme selection and consumption table”. (See: Programme selection
and consumption table). Do not load the product with more laundry than the capacity values specified in
the table.
Laundry Dry load
weight (gr)
Bedsheet (double) 725
Pillowcase 240
Bath Towel 700
Hand Towel 225
Shirt 190
Cotton Shirt 200
Jean 650
Fabric - Gabardine
Trousers 400
T-shirt 120
IMPORTANT
It is not recommended to load the dryer with more laundry than the amount shown in the figure.
When overloaded, the drying performance of the dryer will decrease and the dryer and laundry
might be damaged.
CHAPTER 6. USING THE TUMBLE DRYER
CONTROL PANEL
1. Programme Selection Knob
2. Electronic indicator and additional
functions
45
Programme Selection Knob
Use the programme selection knob to select the desired drying programme.
Electronic Indicator and Additional Functions
Water tank warning indicator
Lint filter cleaning warning indicator
Heat exchanger cleaning warning indicator
Extra Dry
Cupboard Dry
Iron Dry
Drying level 1
Drying level 2
Drying level 3
Drying level 4
Delay Timer
Anti-crease 60‘
Display symbols
46
PROGRAMME SELECTION AND CONSUMPTION TABLE
Press the Start/Pause button to start the programme. The Start/Pause LED that indicates that the programme has
started and the remaining the of the program is seen on the display.
Programme Load (kg)
Washing
machine
spin speed
Approximate
amount of
remaininghumidity
Duration
Cottons + Cupboard Dry 8 1000 60% 189
Synthetics + Cupboard
Dry 4 800 40% 80
Delicate 2 600 50% 55
Anti-crease 120‘
Delicate
Buzzer Cancel
Start and pause
Drying Step Display:
Drying
Iron dry
Cupboard dry
End
The electronic display shows the drying steps throughout the program.
Every time a program step starts, the relevant drying step light turns on.
Once the drying step is complete, the relevant drying step light turns off.
Energy Consumption Display
The energy consumption display shows the energy consumption of the
selected program. The bigger the display, the more the energy consumption.
The energy consumption level increases or decreases depending on the fabric type,
duration of the selected program, the drying level and the spinning speed.
47
Auxiliary Functions
The table that summarises the options that can be selected in programmes is given below
Option Description
Delicate Drying* Delicate fabrics are dried in a longer time at low temperatures.
Mix 4 1000 60% 115
Towels 3 1000 60% 98
Hygiene 3 1000 60% 89
Time drying - - - -
Baby Care 3 1000 60% 86
Duvet 2.5 800 60% 164
Sport 4 800 40% 79
Outdoor 2 800 40% 73
Wool Refreshy - - - 5
Refresh - - - 10
Ekspres 34’ 1 1200 50% 34
Shirt 20’ 0.5 1200 50% 20
Energy consumption values
Programme Load (kg)
Washing
machine
spin speed
Approximate
amount of
remaining
humidity
Energy
consumption
values (kWh)
Cottons + Cupboard
Dry 8 1000 60% 1.91
Cottons + Iron Dry 8 1000 60% 1.47
Synthetics + Cupboard
Dry 4 800 40% 0.78
Power consumption in the „off mode” PO (W) 0.5
Power consumption in the "on mode" PL (W) 1.0
The Cotton Cupboard Dry programme is the standard drying programme that can be run
with a full or half load and for which the information is given on the label and product
receipt. This programme is the most energy efficient programme to dry normal wet cotton
clothes.
* Energy labelling standard programme (EN 61121:2013)
All values in the table were determined in accordance with the EN 61121:2013 standard. Consumption values
may vary from the values in the table depending on the fabric type, spin speed, environment conditions
and voltage values.
48
Option Description
Drying Level
The dampness level obtained after drying can be increased by another
3 levels in addition to the standard setting. This way, it is ensured that
the laundry is drier. Levels that can be selected apart from the standard
setting (Level 1) 2 (low), 3 (medium), 4 (high). After selection, light of the
relevant drying level turns on.
Drying Target
Select the drying target suitable for your laundry to be dried.Select Extra
Dry for thick and multilayer laundry that takes time to dry. Select Closet
Dry for regular, single-layer laundry. Select Iron Dry for laundry that you
wish to leave damp, ready for ironing.
Delayed Start
You can delay the start of the program by selecting a time between 1 and
23 hours. You can press Start/Pause to activate the desired delay time.
When this time is up, the selected program will start automatically. During
the delay time, options compatible with the program can be activated/
deactivated. If you long press the Delayed Start button, the delay time will
change continuously.
Cancel Audible Warning
The drying machine will give an audio warning when the buttons are
pressed, when the program selection knob is turned and when the program
ends. To cancel audio warnings, press and hold the “Anti-Crease Option”
for 3 seconds. When you press this button, you will hear an audible
warning that indicates that the option has been activated and the audible
warnings stated will be cancelled.
Time Drying If the program knob is turned to Time Drying, you can press the Time
Drying option button to select it and press Start/Pause to start the program.
Child Lock
There is a child lock option to avoid changes in the programme flow when
keys are pressed during the programme. To activate child lock feature
user should press “Options” and “Anticrease” buttons simultaneously
for 3 sec. When the child lock activated, all keys will be deactivated.
Child lock is not automatically deactivated at the end of the program. To
deactivate child lock at end of the programme, set the programme selection
knob to “Off” position. Then programme selection knob to first position.
Child lock is still active. To deactivate the child lock , user should press
“Options” and “Anticrease” buttons simultaneously for 3 sec. When
activating/deactivating the child lock, “CL” will visualize on display for 2
sec and then becomes off; and an audible warning will be heard. Warning:
When the product is running or the child lock is active, if you turn the
programme selection knob, you will hear an audible warning and “CL”
will visualize on display for 2 sec and then becomes off. If you turn the
programme selection knob, you will hear an audible warning. Even if you
set the programme knob to another programme, the previous programme
will continue running. To select a new programme, you need to deactivate
the child lock and then set the programme selection knob.
Anti-crease*
If you do not open the door of the machine at the end of the program, the
anti-crease option will be active for 60 minutes. When the anti-crease
option is selected, anti-crease will be active for 120 minutes.
49
Starting the Programme
The Start/Pause LED will flash during programme selection.Press the Start/Pause button to start the
programme. The Start/Pause LED that indicates that the programme has started and the drying LED will
come on.
Programme Description
Cottons This programme dries cotton laundry including bedsheets, pillowcases,
pyjamas, underwear, tablecloths etc.
Synthetics This programme dries synthetics, such as shirts, t-shirts, blouses,
at a lower temperature compared to the cottons programme.
Delicate This programme dries thin clothes like shirts, blouses and silk garments
at a low temperature to make them ready to wear.
Mix This programme dries cotton-synthetic mixed garments that do not
discolour to make them ready to wear.
Towels This programme dries thick cotton laundry such as towels, bathrobe, etc.
Hygiene „This programme is suitable for the fabrics which need
hygiene requirements.”
Time drying
To reach the required drying level at a low temperature, you can use the
time programmes of 10 min. to 150 min. Regardless of the drying level,
the programme stops at the desired time.
Baby Care This programme provides hygienic drying for delicate infant clothes
at a low temperature.
Duvet** This programme is used to dry single duvet with feather, down or synthetic
fillings.
Sport Sport program is used for synthetic sport laundries like shorts,
t-shirts at low temperature.
Outdoor This programme is suitable for outdoor clothing, waterproof jackets,
jackets with inner insulation, etc.
Wool Refresh Wool refresh helps wool textiles to remove excess water after washing
by applying low temperature and gentle movements of drum.
Refresh Time drying option is selected between 10 minutes and 150 minutes
without providing hot air, refresh is done and bad odors can be eliminated.
Option Description
Ion*
Thanks to the negative ion technology, the allergens, smoke residues and
electrostatic charges which are accumulated during the drying process are
purified. In this way, it is ensured that the clothes are easily ironed, fresh-
smelling and hygienic.
Spin Speed Selection
For the laundry to be dried, set the spin speed on the washing machine
where you washed the laundry. This way, it is ensured that the estimated
drying time is more accurately displayed.
*Options vary depending on model.
50
Selection Stand By
After 15 minutes without user action in selection mode, machine goes to energysaving mode due to decrease
energy consumption. No led activation on display.When we changed the knob position in energy-saving
mode the jog dial led should be fix on in every knob change and nothing is shown in display. To restart the
machine it will be necessary to move selector to OFF and select again the program.
Programme Progress
During the Programme
If you open the door when the programme is running, the product will switch to standby mode. Once the door
has been closed, press the Start/Pause key to resume the programme. Do not open the loading door when the
programme is running. If you have to open the door, do not keep it open for a long time.
Programme End
Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter cleaning and heat
exchanger cleaning will turn on. Additionally, an audible warning will be given at the end of the programme.
You can remove the laundry to make the machine ready for a new load.
IMPORTANT
Clean the lint filter after every programme. Empty the water tank after every programme.
IMPORTANT
If you do not take out the laundry after the programme has ended, the 1-hour Anti Crease
phase will automatically be activated. This programme rotates the drum at regular intervals to
prevent creases.
DRUM LIGHT INFORMATION
This product includes LED Drum Light.
The light works automatically when youopen the door. And closes itself after a while
automatically.
It is not an adjustable option for user to open or close it.
Please do not try to replace or modify the LED Light.
Programme Description
Express 34’ 1 kg of synthetics spun at a high speed in the washing machine
are dried in 34 minutes.
Shirts 20’ 2 to 3 shirts are ready for to be ironed in 20 minutes.
IMPORTANT
Do not open the loading door while the programme is running. If you have to open the door,
do not keep it open for a long time.
51
Programme
OPCJE
Drying
Target
Delay
Start
Buzzer
Cancel
Child
Locki Delicate Time
Drying
Drying
Level Anticrease Spin
Cottons X
Synthetics X
Delicate default X X
Mix X
Towels X
Hygiene X
Time drying X X X X
Baby Care X
Duvet X X
Sport X
Outdoor X
Wool Refresh X X X X X
Refresh X X X X
Express 34’ X X X X
Shirts 20’ X X X X
XNo choice
Choice
52
CHAPTER 7. CLEANING AND CARE
IMPORTANT
Do not use industrial chemicals to clean your dryer. Do not use a dryer that has been cleaned
with industrial chemicals.
CLEANING THE LINT FILTERS
WAŻNE
DO NOT FORGET TO CLEAN THE LINT FILTERS AFTER EACH USE.
To clean the lint filters:
1. Open the loading door.
2. Pull up the lint filters to remove it.
3. Open the outer filter.
4. Clean the outer filter by your hands or
using a soft cloth.
5. Open the inner filter
6. Clean the inner filter by your hands or
using a soft cloth.
7. Close the filters and fit the hooks.
8. Place inner filter inside of outer filter.
9. Refit the Lint filter.
After the dryer has been used for a certain period of time, if you
encounter a layer that will cause obstruction on the filter surface,
wash the filter with warm water to clean the layer. Dry the filter
thoroughly before reinstalling it again.
53
If the drying process is completed, open the loading door and wait
for it to cool down.
1. Open the kick plate cover as shown.
2. Unlock the exchanger cover by turning in the direction
shown with arrows.
3. Take out the exchanger cover as shown.
4. Clean the front surface of the exchanger as shown.
5. Fit the exchanger cover as shown.
6. Lock the exchanger cover by turning in the direction
shown with arrows.
7. Close the kick plate cover as shown.
1. Pull the drawer cover and carefully take out
the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the discharge
cap in the tank, clean it with water
4. Refit the water tank.
IMPORTANT
Never remove the water tank when
the
programme is running. The water condensed
in the water tank is not suitable for human
consumption.
IMPORTANT
DO NOT FORGET TO EMPTY THE
WATER TANK AFTER EACH USE.
CLEANING THE HEAT EXCHANGER
EMPTYING THE WATER TANK
1
2
1
2
3
4
5
6
7
54
IMPORTANT
Clean the heat exchanger when you see the warning “Heat Exchanger cleaning”.
IMPORTANT
Even the “heat exchanger cleaning warning LED” is not on: clean the heat exchanger after every
10 drying processes on three times month.
Inside the machine, there are humidity sensors
that detect whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the
machine.
2. If the machine is still hot due to the
drying process, wait for it to cool
down.
3. Using a soft cloth soaked in vinegar,
wipe the metal surfaces of the
sensor and dry them.
WARNIN
DO NOT CLEAN WITH BARE HANDS SINCE THE EXXHANGER FINS ARE SHARP.
THEY MAY HURT YOUR HANDS.
IMPORTANT
Clean the metal surfaces of the sencor 4 times a year.
IMPORTANT
Do not use metal tools to clean the metal surfaces of the sensor.
WARNING
Due to the risk or fire and explosion, do not use solution agents, cleaning agents or similar
products when cleaning the sensors.
CLEANING THE INNER SURFACE OF THE LOADING DOOR
IMPORTANT
DO NOT FORGET TO CLEAN THE INNER SURFACE OF THE LOADING DOOR AFTER
EACH DRYING PROCESS.
Open the loading door of the dryer and clean all of the inner surfaces and the gasket with a soft, damp cloth.
CLEANING THE HUMIDITY SENSOR
55
CHAPTER 8. MACHINE SOUND
Source of sound Denition
Pump Sound
Pump is activated when the machine starts
to work and during the operation at certain
intervals. It is normal to hear pump and
water sound during this process.
Compressor Sound
It is normal to hear a metallic sound from
the compressor from time to time while
the machine is running.
56
CHAPTER 9. TECHNICAL SPECIFICATIONS
Brand KERNAU
Model name KFD 8503.1
Height Min: 845 mm / Max: 855 mm*
Width 596 mm
Depth 563 mm
Capacity (max.) 8 kg**
Net weight (with plastic door) 42,8 kg
Net weight (with glass door) 45,2 kg
Voltage 220-240 V
Power 1000 W
*Min. height: Height with the adjustable feet not used.
Max. height: Height with the adjustable feet extended to the maximum.
**Dry laundry weight before washing.
IMPORTANT
To improve the quality of the dryer, technical specifications are subject to change without prior
notice.
IMPORTANT
The values declared have been obtained in a laboratory environment according to the relevant
standards. These values may change depending on the environmental conditions and use of
the dryer.
ATTENTION
1. Due to safety reasons, legislation forces a room of at least 1 per 8 g refrigerant for such
equipment. For 110 g propane, the minimum allowed room size would be 13.75 m³.
2. Coolant :Risk of fire/risk of poisoning/risk of material damage and damage to the appliance.
The appliance contains refrigerant which, although it is environmentally friendly, is flammable
R290. Failure to dispose of it properly may result in a fire or poisoning. Dispose of the
appliance properly and do not damage the pipes in the refrigerant circuit.
Type of refrigerant : R290
Quantity of gas : 110 g
ODP (Ozone Depletion Potential) : 0
GWP (Global Warning Potential) : 3
3. Risk of explosion or fire. Remove any cigarette lighters and matches from pockets.
4. Do not place the dryer near open fires and ignition sources.
57
PROBLEM REASON SOLUTION
The drying process takes
a long time.
The surface of the lint filter
might be clogged.
Wash the filter with
lukewarm water.
The heat exchanger might
be clogged. Clean the heat exchanger.
The ventilation grills in front of
the machine might be closed.
Open the doors/windows
to prevent the room temperature
from rising too much.
There might be a layer
of limescale on the
humidity sensor.
Clean the humidity sensor.
The dryer might be overloaded
with laundry. Do not overload the dryer.
The laundry might
be insufficiently spun.
Select a higher spin speed
on your washing machine.
Laundry comes out damp at the
end of the drying process.
The laundry that comes out hot at the end of the drying
process generally feels more humid.
The programme used might
not be suitable for the type of
laundry.
Check the care labels on the
laundry items, select a suitable
programme for the type
of laundry and additionally,
use the time programmes.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm
water.
The heat exchanger might
be clogged. Clean the heat exchanger.
The dryer might be overloaded
with laundry. Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on
your washing machine.
The dryer cannot be opened
or the programme cannot be
started. The dryer does not get
activated when adjusted.
The dryer might
not be plugged in.
Make sure that the plug is fitted
in the socket.
The loading door might be open. Make sure that the loading door
is properly closed.
CHAPTER 10. TROUBLESHOOTING
Your dryer is fitted with systems that continuously perform checks during the drying process to take the
necessary measures and warn you in case of any malfunction.
WARNING
If the problem persists even if you have applied the steps in this section, please contact the your
dealer or an Authorised Service Provider. Never try to repair a nonfunctional product.
58
The dryer cannot be opened
or the programme cannot be
started. The dryer does not get
activated when adjusted.
You might not have set
a programme or pressed the
Start/Pause key.
Make sure that the programme
has been set and the dryer is not
in the Standby (Pause) mode.
Child lock might be active. Deactivate the child lock.
The programme has been
interrupted for no reason.
The loading door might not
be closed properly.
Make sure that the loading door
is properly closed.
There might have been a power
failure.
Press the Start/Pause key to start
the programme.
The water tank might be full. Empty the water tank.
Clothes have shrunk, felted
or deteriorated.
The programme used might not
be suitable for the type
of laundry.
Check the care labels on the
laundry items, select a suitable
programme for the type of
laundry.
Water leaking from the loading
door.
There might be lint accumulated
on the inner surfaces of the
loading door and on the surfaces
of the gasket of the loading door.
Clean the inner surfaces of the
loading door and the surfaces of
the gasket of the loading door.
The loading door opens on its
own.
The loading door might not be
closed properly.
Push the loading door until you
hear the closing sound.
The water tank warning symbol
is on/flashing.
The water tank might be full. Empty the water tank.
The water discharge hose might
be bent.
If the product is connected
directly to the water outlet,
check the water discharge hose.
The heat exchanger cleaning
warning symbol is on.
The heat exchanger might be
unclean. Clean the heat exchanger.
The filter cleaning warning
symbol is on.
The lint filter might be unclean. Clean the filter.
The filter seat might be clogged
by lint. Clean the filter seat.
There might be a layer that
causes obstruction on the surface
of the lint filter.
Wash the filter with lukewarm
water
The filter and heat exchanger
cleaning warning symbol are
flashing.
The filter seat might be clogged
by lint. Clean the filter seat.
There might be a layer that
causes obstruction on the surface
of the lint filter.
Wash the filter with lukewarm
water.
The heat exchanger might be
clogged. Clean the heat exchanger.
The program can not be started
and the filter warning led is
blinking.
The filter may not be placed. Replace the filter.
The filter warning led is blinking
even though the filter is placed. Call technical service.
59
ERROR CODE SOLUTION
E00 Contact the nearest authorised service agent.
E03 / Empty the water tank, if problem does not solved,
contact the nearest authorised service agent.
E04 Contact the nearest authorised service agent.
E05 Contact the nearest authorised service agent.
E06 Contact the nearest authorised service agent.
E07 Contact the nearest authorised service agent.
E08 There may be voltage fluctuation in mains.
Wait until voltage is appropriate for working range.
CHAPTER 12. ENVIRONMENTAL PROTECTION AND PACKING
INFORMATION
PACKAGING INFORMATION
The packaging of this product is made of recyclable materials. Do not dispose of the packaging, waste
together with household or other waste. Instead, take it to a packaging collection point defined by your
local authority.
CHAPTER 11. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your tumble dryer is equipped with a built-in fault detection system, indicated by a combination of flashing
operation lights. The most common failure codes are shown below.
DISPOSAL OF USED EQUIPMENT
This device has been designed and manufactured of high-quality reusable materials and components.
The symbol of the crossed waste container placed on the product (Fig. A) means that the product is subject to
selective collection in accordance with the provisions of Directive 2012/19/EU of the European Parliament
and of the Council. A crossed-out wheelie bin symbol (Fig. B) placed on the product means that the product
contains batteries that are subject to separate collection in accordance with the provisions of Directive
2006/66/EC of the European Parliament and of the Council. Such marking informs that electrical and
electronic equipment and batteries (if any) must not be disposed of with other household waste after the
period of use.
The user is obliged to return waste equipment and batteries (if any) to collection points for waste electrical and
electronic equipment and batteries (if any). Collectors of such waste, including waste equipment collectors,
treatment plants, distributors (shops), municipal waste separate collection points (municipal units), and other
entities specified by law form an appropriate system to return this kind of equipment.
60
Correct disposal of waste equipment and batteries (if any) allows avoiding consequences that may be harmful
to health and the environment, caused by the possible presence of hazardous components in the equipment
and batteries, and inappropriate storage and processing of such equipment and batteries. Households play
an important role in contributing to the reuse and recovery, including recycling, of waste equipment. At this
stage, attitudes are formed, affecting the common good, which is a clean natural environment.
Moreover, households are one of the largest users of small equipment and the rational management thereof
at this stage affects the recovery of secondary raw materials.
Penalties may be imposed in accordance with national legislation for improper disposal of this product.
If the device has a lock, please remove it for the safety of all persons who may later come into contact with
the device.
Some refrigerators and freezers contain insulation material and CFC refrigerant. Therefore, be careful not
to pollute the environment when you dispose of your old refrigerator.
61
ENERGY EFFICIENCY
You should operate the dryer to full capacity, but make sure that it is not overloaded.
When the laundry is being washed, the spin speed should be at the highest level possible. This
will shorten the drying time and reduce energy consumption.
Make sure that the same kinds of laundry are dried together.
Please follow the recommendations in the user manual for programme selection.
For air circulation, leave an appropriate clearance on the front and back sides of the dryer. Do
not cover the grills on the front side of the machine.
Unless necessary, do not open the door of the machine when drying. If you have to open it, do
not keep it open for a long time.
Do not add new (wet) laundry during the drying process.
Hairs and lint that detach from the laundry and merge in the air are collected by the „Lint Filters”.
Please make sure that the filters are cleaned before and after each use.
For models with a heat pump, make sure that the heat exchanger is cleaned at least three times
a month or after each 10 uses.
During the drying process, the environment where the dryer is installed must be well ventilated.
ENERGY LABELLING
1. Trademark
2. Model
3. Energy Class
4. Annual Power Consumption
5. Noise During Drying
6. Dry Laundry Capacity
7. Cotton Cupboard Dry Cycle Time
8. Condensing Efficiency Class
9. Machine Technology
CHAPTER 13. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY
2
3
4
5
8 7 6
9
1
62
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 392/2012
Supplier name or trademark KERNAU
Model name KFD 8503.1
Rated capacity (kg) 8
Type of Tumble Dryer Heat Pump
Energy efficiency class (1) A++
Annual Energy Consumption (kWh) (2) 235
Automatic of Non-automatic Automatic
Energy Consumption of the standart cotton programme at full load (kWh) 1.918
Energy Consumption of the standart cotton programme at partial load (kWh) 1.07
Power consumption of the off-mode for the standart cotton programme at full
load PO (W)
0.5
Power consumption of the left-on mode for the standart cotton programme at
full load PL (W)
1
The duration of the left mode on (min) n.a.
Standart cotton programme (3)
Programme time of the standart cotton programme at full load , Tdry (dak.) 189
Programme time of the standart cotton programme at partial load , Tdry1/2
(dak.)
113
Weighted programme time of the standart cotton programme at full and
partial load (Tt)
146
Condensation efficiency class (4) B
Average condensation efficiency of the standart cotton programme at full load
Cdry
81%
Average condensation efficiency of the standart cotton programme at partial
load Cdry1/2
81%
Weighted condensation efficiency of the standart cotton programme at full
load and partial load Ct
81%
Sound power level for the standart cotton programme at full load (5) 65
Built-in No
(1) Scale from A+++ (most efficient) to D (least efficient).
(2)
Energyconsumption based on 160 drying cycles of the standard cotton programme at full and partial
load,and the consumption of the low-power modes. Actual energy consumption per cycle will depend on
how the appliance is used.
(3) “Cotton cupboard dry programme” used at full and partial load is the standard drying programme to
which the information in the label and the fiche relates, that this programme is suitable for drying normal
wet cotton laundry and that it is the most efficient programme in terms of energyconsumption for cotton.
(4) Scale from G (least efficient) to A (most efficient).
(5) Weighted average value - L wA expressed in dB(A) re 1 pW.
/