Kernau KFD 8503.1 Návod na obsluhu

Značka: Kernau

Model: KFD 8503.1

Typ: Návod na obsluhu

Suitable for drying

in a dryer Does not need ironing Sensitive/Delicate

drying

Not suitable for drying

in a dryer

No drying Do not

dry-clean At any temperature At high temperatures

At medium

tempreratures At low temperatures Heatless Hang to dry

Spread to dry Hang wet to dry Spread in shadow

to dry

Suitable for dry

cleaning

Do not dry thin, multi-layer or thick-layer fabrics together as they dry at different levels. For this reason, dry

clothes together that have the same structure and fabric type. This way, you can get an even drying result. If

you think that the laundry is still wet, you can select a time programme for additional drying.

Please dry your big (like duvets) and small sizes of laundries seperately in order to not to have a damp

laundries

IMPORTANT

Delicate fabrics, embroided fabrics, woolen/silk fabrics, clothes made of delicate and expensive

fabrics, airtight clothes and tulle curtains are not suitable for drying in the dryer.

PREPARING THE LAUNDRY TO BE DRIED

FIRE

Risk of explosion and fire!

Remove all objects from pockets such as lighters and matches.

ATTENTION

The drum of the dryer and the fabrics may get damaged

• The clothes may have become entangled during the washing process. Separate them from each

other before placing them in the dryer.

• Remove all objects in the pockets of the clothes and apply the following:

• The fabric belts, apron laces etc. to each other or use a laundry bag.

• Lock the zips, clasps and fasteners, do up the buttons of covers.

•

To get the best drying result, sort the laundry according to the textile type and drying programme.

• Remove clips and similar metal parts from the clothes.

•

Woven goods such as t-shirts and knit clothes generally shrink in the first drying. Use

a protective programme.

• Do not over-dry synthetics. This will cause creases.

• When washing the laundry to be dried, adjust the amount of softener according to the data from

the manufacturer of the washing machine

LOAD CAPACITY

Follow the instructions in the „Programme selection and consumption table”. (See: Programme selection

and consumption table). Do not load the product with more laundry than the capacity values specified in

the table.

Laundry Dry load

weight (gr)

Bedsheet (double) 725

Pillowcase 240

Bath Towel 700

Hand Towel 225

Shirt 190

Cotton Shirt 200

Jean 650

Fabric - Gabardine

Trousers 400

T-shirt 120

IMPORTANT

It is not recommended to load the dryer with more laundry than the amount shown in the figure.

When overloaded, the drying performance of the dryer will decrease and the dryer and laundry

might be damaged.

CHAPTER 6. USING THE TUMBLE DRYER

CONTROL PANEL

1. Programme Selection Knob

2. Electronic indicator and additional

functions

Programme Selection Knob

Use the programme selection knob to select the desired drying programme.

Electronic Indicator and Additional Functions

Water tank warning indicator

Lint filter cleaning warning indicator

Heat exchanger cleaning warning indicator

Extra Dry

Cupboard Dry

Iron Dry

Drying level 1

Drying level 2

Drying level 3

Drying level 4

Delay Timer

Anti-crease 60‘

Display symbols

PROGRAMME SELECTION AND CONSUMPTION TABLE

Press the Start/Pause button to start the programme. The Start/Pause LED that indicates that the programme has

started and the remaining the of the program is seen on the display.

Programme Load (kg)

Washing

machine

spin speed

Approximate

amount of

remaininghumidity

Duration

Cottons + Cupboard Dry 8 1000 60% 189

Synthetics + Cupboard

Dry 4 800 40% 80

Delicate 2 600 50% 55

Anti-crease 120‘

Delicate

Buzzer Cancel

Start and pause

Drying Step Display:

Drying

Iron dry

Cupboard dry

End

The electronic display shows the drying steps throughout the program.

Every time a program step starts, the relevant drying step light turns on.

Once the drying step is complete, the relevant drying step light turns off.

Energy Consumption Display

The energy consumption display shows the energy consumption of the

selected program. The bigger the display, the more the energy consumption.

The energy consumption level increases or decreases depending on the fabric type,

duration of the selected program, the drying level and the spinning speed.

Auxiliary Functions

The table that summarises the options that can be selected in programmes is given below

Option Description

Delicate Drying* Delicate fabrics are dried in a longer time at low temperatures.

Mix 4 1000 60% 115

Towels 3 1000 60% 98

Hygiene 3 1000 60% 89

Time drying - - - -

Baby Care 3 1000 60% 86

Duvet 2.5 800 60% 164

Sport 4 800 40% 79

Outdoor 2 800 40% 73

Wool Refreshy - - - 5

Refresh - - - 10

Ekspres 34’ 1 1200 50% 34

Shirt 20’ 0.5 1200 50% 20

Energy consumption values

Programme Load (kg)

Washing

machine

spin speed

Approximate

amount of

remaining

humidity

Energy

consumption

values (kWh)

Cottons + Cupboard

Dry 8 1000 60% 1.91

Cottons + Iron Dry 8 1000 60% 1.47

Synthetics + Cupboard

Dry 4 800 40% 0.78

Power consumption in the „off mode” PO (W) 0.5

Power consumption in the "on mode" PL (W) 1.0

The Cotton Cupboard Dry programme is the standard drying programme that can be run

with a full or half load and for which the information is given on the label and product

receipt. This programme is the most energy efficient programme to dry normal wet cotton

clothes.

* Energy labelling standard programme (EN 61121:2013)

All values in the table were determined in accordance with the EN 61121:2013 standard. Consumption values

may vary from the values in the table depending on the fabric type, spin speed, environment conditions

and voltage values.

Option Description

Drying Level

The dampness level obtained after drying can be increased by another

3 levels in addition to the standard setting. This way, it is ensured that

the laundry is drier. Levels that can be selected apart from the standard

setting (Level 1) 2 (low), 3 (medium), 4 (high). After selection, light of the

relevant drying level turns on.

Drying Target

Select the drying target suitable for your laundry to be dried.Select Extra

Dry for thick and multilayer laundry that takes time to dry. Select Closet

Dry for regular, single-layer laundry. Select Iron Dry for laundry that you

wish to leave damp, ready for ironing.

Delayed Start

You can delay the start of the program by selecting a time between 1 and

23 hours. You can press Start/Pause to activate the desired delay time.

When this time is up, the selected program will start automatically. During

the delay time, options compatible with the program can be activated/

deactivated. If you long press the Delayed Start button, the delay time will

change continuously.

Cancel Audible Warning

The drying machine will give an audio warning when the buttons are

pressed, when the program selection knob is turned and when the program

ends. To cancel audio warnings, press and hold the “Anti-Crease Option”

for 3 seconds. When you press this button, you will hear an audible

warning that indicates that the option has been activated and the audible

warnings stated will be cancelled.

Time Drying If the program knob is turned to Time Drying, you can press the Time

Drying option button to select it and press Start/Pause to start the program.

Child Lock

There is a child lock option to avoid changes in the programme flow when

keys are pressed during the programme. To activate child lock feature

user should press “Options” and “Anticrease” buttons simultaneously

for 3 sec. When the child lock activated, all keys will be deactivated.

Child lock is not automatically deactivated at the end of the program. To

deactivate child lock at end of the programme, set the programme selection

knob to “Off” position. Then programme selection knob to first position.

Child lock is still active. To deactivate the child lock , user should press

“Options” and “Anticrease” buttons simultaneously for 3 sec. When

activating/deactivating the child lock, “CL” will visualize on display for 2

sec and then becomes off; and an audible warning will be heard. Warning:

When the product is running or the child lock is active, if you turn the

programme selection knob, you will hear an audible warning and “CL”

will visualize on display for 2 sec and then becomes off. If you turn the

programme selection knob, you will hear an audible warning. Even if you

set the programme knob to another programme, the previous programme

will continue running. To select a new programme, you need to deactivate

the child lock and then set the programme selection knob.

Anti-crease*

If you do not open the door of the machine at the end of the program, the

anti-crease option will be active for 60 minutes. When the anti-crease

option is selected, anti-crease will be active for 120 minutes.

Starting the Programme

The Start/Pause LED will flash during programme selection.Press the Start/Pause button to start the

programme. The Start/Pause LED that indicates that the programme has started and the drying LED will

come on.

Programme Description

Cottons This programme dries cotton laundry including bedsheets, pillowcases,

pyjamas, underwear, tablecloths etc.

Synthetics This programme dries synthetics, such as shirts, t-shirts, blouses,

at a lower temperature compared to the cottons programme.

Delicate This programme dries thin clothes like shirts, blouses and silk garments

at a low temperature to make them ready to wear.

Mix This programme dries cotton-synthetic mixed garments that do not

discolour to make them ready to wear.

Towels This programme dries thick cotton laundry such as towels, bathrobe, etc.

Hygiene „This programme is suitable for the fabrics which need

hygiene requirements.”

Time drying

To reach the required drying level at a low temperature, you can use the

time programmes of 10 min. to 150 min. Regardless of the drying level,

the programme stops at the desired time.

Baby Care This programme provides hygienic drying for delicate infant clothes

at a low temperature.

Duvet** This programme is used to dry single duvet with feather, down or synthetic

fillings.

Sport Sport program is used for synthetic sport laundries like shorts,

t-shirts at low temperature.

Outdoor This programme is suitable for outdoor clothing, waterproof jackets,

jackets with inner insulation, etc.

Wool Refresh Wool refresh helps wool textiles to remove excess water after washing

by applying low temperature and gentle movements of drum.

Refresh Time drying option is selected between 10 minutes and 150 minutes

without providing hot air, refresh is done and bad odors can be eliminated.

Option Description

Ion*

Thanks to the negative ion technology, the allergens, smoke residues and

electrostatic charges which are accumulated during the drying process are

purified. In this way, it is ensured that the clothes are easily ironed, fresh-

smelling and hygienic.

Spin Speed Selection

For the laundry to be dried, set the spin speed on the washing machine

where you washed the laundry. This way, it is ensured that the estimated

drying time is more accurately displayed.

*Options vary depending on model.

Selection Stand By

After 15 minutes without user action in selection mode, machine goes to energysaving mode due to decrease

energy consumption. No led activation on display.When we changed the knob position in energy-saving

mode the jog dial led should be fix on in every knob change and nothing is shown in display. To restart the

machine it will be necessary to move selector to OFF and select again the program.

Programme Progress

During the Programme

If you open the door when the programme is running, the product will switch to standby mode. Once the door

has been closed, press the Start/Pause key to resume the programme. Do not open the loading door when the

programme is running. If you have to open the door, do not keep it open for a long time.

Programme End

Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter cleaning and heat

exchanger cleaning will turn on. Additionally, an audible warning will be given at the end of the programme.

You can remove the laundry to make the machine ready for a new load.

IMPORTANT

Clean the lint filter after every programme. Empty the water tank after every programme.

IMPORTANT

If you do not take out the laundry after the programme has ended, the 1-hour Anti Crease

phase will automatically be activated. This programme rotates the drum at regular intervals to

prevent creases.

DRUM LIGHT INFORMATION

• This product includes LED Drum Light.

•

The light works automatically when youopen the door. And closes itself after a while

automatically.

• It is not an adjustable option for user to open or close it.

• Please do not try to replace or modify the LED Light.

Programme Description

Express 34’ 1 kg of synthetics spun at a high speed in the washing machine

are dried in 34 minutes.

Shirts 20’ 2 to 3 shirts are ready for to be ironed in 20 minutes.

IMPORTANT

Do not open the loading door while the programme is running. If you have to open the door,

do not keep it open for a long time.

Programme

OPCJE

Drying

Target

Delay

Start

Buzzer

Cancel

Child

Locki Delicate Time

Drying

Level Anticrease Spin

Cottons X

Synthetics X

Delicate default X X

Mix X

Towels X

Hygiene X

Time drying X X X X

Baby Care X

Duvet X X

Sport X

Outdoor X

Wool Refresh X X X X X

Refresh X X X X

Express 34’ X X X X

Shirts 20’ X X X X

XNo choice

Choice

CHAPTER 7. CLEANING AND CARE

IMPORTANT

Do not use industrial chemicals to clean your dryer. Do not use a dryer that has been cleaned

with industrial chemicals.

CLEANING THE LINT FILTERS

WAŻNE

DO NOT FORGET TO CLEAN THE LINT FILTERS AFTER EACH USE.

To clean the lint filters:

1. Open the loading door.

2. Pull up the lint filters to remove it.

3. Open the outer filter.

4. Clean the outer filter by your hands or

using a soft cloth.

5. Open the inner filter

6. Clean the inner filter by your hands or

using a soft cloth.

7. Close the filters and fit the hooks.

8. Place inner filter inside of outer filter.

9. Refit the Lint filter.

After the dryer has been used for a certain period of time, if you

encounter a layer that will cause obstruction on the filter surface,

wash the filter with warm water to clean the layer. Dry the filter

thoroughly before reinstalling it again.

If the drying process is completed, open the loading door and wait

for it to cool down.

1. Open the kick plate cover as shown.

2. Unlock the exchanger cover by turning in the direction

shown with arrows.

3. Take out the exchanger cover as shown.

4. Clean the front surface of the exchanger as shown.

5. Fit the exchanger cover as shown.

6. Lock the exchanger cover by turning in the direction

shown with arrows.

7. Close the kick plate cover as shown.

1. Pull the drawer cover and carefully take out

the tank.

2. Empty the water in the tank.

3. If there is lint accumulated on the discharge

cap in the tank, clean it with water

4. Refit the water tank.

IMPORTANT

Never remove the water tank when

the

programme is running. The water condensed

in the water tank is not suitable for human

consumption.

IMPORTANT

DO NOT FORGET TO EMPTY THE

WATER TANK AFTER EACH USE.

CLEANING THE HEAT EXCHANGER

EMPTYING THE WATER TANK

IMPORTANT

Clean the heat exchanger when you see the warning “Heat Exchanger cleaning”.

IMPORTANT

Even the “heat exchanger cleaning warning LED” is not on: clean the heat exchanger after every

10 drying processes on three times month.

Inside the machine, there are humidity sensors

that detect whether the laundry is dry or not.

To clean the sensors:

1. Open the loading door of the

machine.

2. If the machine is still hot due to the

drying process, wait for it to cool

down.

3. Using a soft cloth soaked in vinegar,

wipe the metal surfaces of the

sensor and dry them.

WARNIN

DO NOT CLEAN WITH BARE HANDS SINCE THE EXXHANGER FINS ARE SHARP.

THEY MAY HURT YOUR HANDS.

IMPORTANT

Clean the metal surfaces of the sencor 4 times a year.

IMPORTANT

Do not use metal tools to clean the metal surfaces of the sensor.

WARNING

Due to the risk or fire and explosion, do not use solution agents, cleaning agents or similar

products when cleaning the sensors.

CLEANING THE INNER SURFACE OF THE LOADING DOOR

IMPORTANT

DO NOT FORGET TO CLEAN THE INNER SURFACE OF THE LOADING DOOR AFTER

EACH DRYING PROCESS.

Open the loading door of the dryer and clean all of the inner surfaces and the gasket with a soft, damp cloth.

CLEANING THE HUMIDITY SENSOR

CHAPTER 8. MACHINE SOUND

Source of sound Denition

Pump Sound

Pump is activated when the machine starts

to work and during the operation at certain

intervals. It is normal to hear pump and

water sound during this process.

Compressor Sound

It is normal to hear a metallic sound from

the compressor from time to time while

the machine is running.

CHAPTER 9. TECHNICAL SPECIFICATIONS

Brand KERNAU

Model name KFD 8503.1

Height Min: 845 mm / Max: 855 mm*

Width 596 mm

Depth 563 mm

Capacity (max.) 8 kg**

Net weight (with plastic door) 42,8 kg

Net weight (with glass door) 45,2 kg

Voltage 220-240 V

Power 1000 W

*Min. height: Height with the adjustable feet not used.

Max. height: Height with the adjustable feet extended to the maximum.

**Dry laundry weight before washing.

IMPORTANT

To improve the quality of the dryer, technical specifications are subject to change without prior

notice.

IMPORTANT

The values declared have been obtained in a laboratory environment according to the relevant

standards. These values may change depending on the environmental conditions and use of

the dryer.

ATTENTION

1. Due to safety reasons, legislation forces a room of at least 1 m³ per 8 g refrigerant for such

equipment. For 110 g propane, the minimum allowed room size would be 13.75 m³.

2. Coolant :Risk of fire/risk of poisoning/risk of material damage and damage to the appliance.

The appliance contains refrigerant which, although it is environmentally friendly, is flammable

R290. Failure to dispose of it properly may result in a fire or poisoning. Dispose of the

appliance properly and do not damage the pipes in the refrigerant circuit.

• Type of refrigerant : R290

• Quantity of gas : 110 g

• ODP (Ozone Depletion Potential) : 0

• GWP (Global Warning Potential) : 3

3. Risk of explosion or fire. Remove any cigarette lighters and matches from pockets.

4. Do not place the dryer near open fires and ignition sources.

PROBLEM REASON SOLUTION

The drying process takes

a long time.

The surface of the lint filter

might be clogged.

Wash the filter with

lukewarm water.

The heat exchanger might

be clogged. Clean the heat exchanger.

The ventilation grills in front of

the machine might be closed.

Open the doors/windows

to prevent the room temperature

from rising too much.

There might be a layer

of limescale on the

humidity sensor.

Clean the humidity sensor.

The dryer might be overloaded

with laundry. Do not overload the dryer.

The laundry might

be insufficiently spun.

Select a higher spin speed

on your washing machine.

Laundry comes out damp at the

end of the drying process.

The laundry that comes out hot at the end of the drying

process generally feels more humid.

The programme used might

not be suitable for the type of

laundry.

Check the care labels on the

laundry items, select a suitable

programme for the type

of laundry and additionally,

use the time programmes.

The surface of the lint filter

might be clogged.

Wash the filter with lukewarm

water.

The heat exchanger might

be clogged. Clean the heat exchanger.

The dryer might be overloaded

with laundry. Do not overload the dryer.

The laundry might be

insufficiently spun.

Select a higher spin speed on

your washing machine.

The dryer cannot be opened

or the programme cannot be

started. The dryer does not get

activated when adjusted.

The dryer might

not be plugged in.

Make sure that the plug is fitted

in the socket.

The loading door might be open. Make sure that the loading door

is properly closed.

CHAPTER 10. TROUBLESHOOTING

Your dryer is fitted with systems that continuously perform checks during the drying process to take the

necessary measures and warn you in case of any malfunction.

WARNING

If the problem persists even if you have applied the steps in this section, please contact the your

dealer or an Authorised Service Provider. Never try to repair a nonfunctional product.

The dryer cannot be opened

or the programme cannot be

started. The dryer does not get

activated when adjusted.

You might not have set

a programme or pressed the

Start/Pause key.

Make sure that the programme

has been set and the dryer is not

in the Standby (Pause) mode.

Child lock might be active. Deactivate the child lock.

The programme has been

interrupted for no reason.

The loading door might not

be closed properly.

Make sure that the loading door

is properly closed.

There might have been a power

failure.

Press the Start/Pause key to start

the programme.

The water tank might be full. Empty the water tank.

Clothes have shrunk, felted

or deteriorated.

The programme used might not

be suitable for the type

of laundry.

Check the care labels on the

laundry items, select a suitable

programme for the type of

laundry.

Water leaking from the loading

door.

There might be lint accumulated

on the inner surfaces of the

loading door and on the surfaces

of the gasket of the loading door.

Clean the inner surfaces of the

loading door and the surfaces of

the gasket of the loading door.

The loading door opens on its

own.

The loading door might not be

closed properly.

Push the loading door until you

hear the closing sound.

The water tank warning symbol

is on/flashing.

The water tank might be full. Empty the water tank.

The water discharge hose might

be bent.

If the product is connected

directly to the water outlet,

check the water discharge hose.

The heat exchanger cleaning

warning symbol is on.

The heat exchanger might be

unclean. Clean the heat exchanger.

The filter cleaning warning

symbol is on.

The lint filter might be unclean. Clean the filter.

The filter seat might be clogged

by lint. Clean the filter seat.

There might be a layer that

causes obstruction on the surface

of the lint filter.

Wash the filter with lukewarm

water

The filter and heat exchanger

cleaning warning symbol are

flashing.

The filter seat might be clogged

by lint. Clean the filter seat.

There might be a layer that

causes obstruction on the surface

of the lint filter.

Wash the filter with lukewarm

water.

The heat exchanger might be

clogged. Clean the heat exchanger.

The program can not be started

and the filter warning led is

blinking.

The filter may not be placed. Replace the filter.

The filter warning led is blinking

even though the filter is placed. Call technical service.

ERROR CODE SOLUTION

E00 Contact the nearest authorised service agent.

E03 / Empty the water tank, if problem does not solved,

contact the nearest authorised service agent.

E04 Contact the nearest authorised service agent.

E05 Contact the nearest authorised service agent.

E06 Contact the nearest authorised service agent.

E07 Contact the nearest authorised service agent.

E08 There may be voltage fluctuation in mains.

Wait until voltage is appropriate for working range.

CHAPTER 12. ENVIRONMENTAL PROTECTION AND PACKING

INFORMATION

PACKAGING INFORMATION

The packaging of this product is made of recyclable materials. Do not dispose of the packaging, waste

together with household or other waste. Instead, take it to a packaging collection point defined by your

local authority.

CHAPTER 11. AUTOMATIC FAULT WARNINGS AND WHAT TO DO

Your tumble dryer is equipped with a built-in fault detection system, indicated by a combination of flashing

operation lights. The most common failure codes are shown below.

DISPOSAL OF USED EQUIPMENT

This device has been designed and manufactured of high-quality reusable materials and components.

The symbol of the crossed waste container placed on the product (Fig. A) means that the product is subject to

selective collection in accordance with the provisions of Directive 2012/19/EU of the European Parliament

and of the Council. A crossed-out wheelie bin symbol (Fig. B) placed on the product means that the product

contains batteries that are subject to separate collection in accordance with the provisions of Directive

2006/66/EC of the European Parliament and of the Council. Such marking informs that electrical and

electronic equipment and batteries (if any) must not be disposed of with other household waste after the

period of use.

The user is obliged to return waste equipment and batteries (if any) to collection points for waste electrical and

electronic equipment and batteries (if any). Collectors of such waste, including waste equipment collectors,

treatment plants, distributors (shops), municipal waste separate collection points (municipal units), and other

entities specified by law form an appropriate system to return this kind of equipment.

Correct disposal of waste equipment and batteries (if any) allows avoiding consequences that may be harmful

to health and the environment, caused by the possible presence of hazardous components in the equipment

and batteries, and inappropriate storage and processing of such equipment and batteries. Households play

an important role in contributing to the reuse and recovery, including recycling, of waste equipment. At this

stage, attitudes are formed, affecting the common good, which is a clean natural environment.

Moreover, households are one of the largest users of small equipment and the rational management thereof

at this stage affects the recovery of secondary raw materials.

Penalties may be imposed in accordance with national legislation for improper disposal of this product.

If the device has a lock, please remove it for the safety of all persons who may later come into contact with

the device.

Some refrigerators and freezers contain insulation material and CFC refrigerant. Therefore, be careful not

to pollute the environment when you dispose of your old refrigerator.

ENERGY EFFICIENCY

• You should operate the dryer to full capacity, but make sure that it is not overloaded.

• When the laundry is being washed, the spin speed should be at the highest level possible. This

will shorten the drying time and reduce energy consumption.

• Make sure that the same kinds of laundry are dried together.

• Please follow the recommendations in the user manual for programme selection.

• For air circulation, leave an appropriate clearance on the front and back sides of the dryer. Do

not cover the grills on the front side of the machine.

• Unless necessary, do not open the door of the machine when drying. If you have to open it, do

not keep it open for a long time.

• Do not add new (wet) laundry during the drying process.

•

Hairs and lint that detach from the laundry and merge in the air are collected by the „Lint Filters”.

Please make sure that the filters are cleaned before and after each use.

• For models with a heat pump, make sure that the heat exchanger is cleaned at least three times

a month or after each 10 uses.

•

During the drying process, the environment where the dryer is installed must be well ventilated.

ENERGY LABELLING

1. Trademark

2. Model

3. Energy Class

4. Annual Power Consumption

5. Noise During Drying

6. Dry Laundry Capacity

7. Cotton Cupboard Dry Cycle Time

8. Condensing Efficiency Class

9. Machine Technology

CHAPTER 13. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY

8 7 6

PRODUCT FICHE

Complying Commission Delegated Regulation (EU) No 392/2012

Supplier name or trademark KERNAU

Model name KFD 8503.1

Rated capacity (kg) 8

Type of Tumble Dryer Heat Pump

Energy efficiency class (1) A++

Annual Energy Consumption (kWh) (2) 235

Automatic of Non-automatic Automatic

Energy Consumption of the standart cotton programme at full load (kWh) 1.918

Energy Consumption of the standart cotton programme at partial load (kWh) 1.07

Power consumption of the off-mode for the standart cotton programme at full

load PO (W)

0.5

Power consumption of the left-on mode for the standart cotton programme at

full load PL (W)

The duration of the left mode on (min) n.a.

Standart cotton programme (3)

Programme time of the standart cotton programme at full load , Tdry (dak.) 189

Programme time of the standart cotton programme at partial load , Tdry1/2

(dak.)

113

Weighted programme time of the standart cotton programme at full and

partial load (Tt)

146

Condensation efficiency class (4) B

Average condensation efficiency of the standart cotton programme at full load

Cdry

81%

Average condensation efficiency of the standart cotton programme at partial

load Cdry1/2

81%

Weighted condensation efficiency of the standart cotton programme at full

load and partial load Ct

81%

Sound power level for the standart cotton programme at full load (5) 65

Built-in No

(1) Scale from A+++ (most efficient) to D (least efficient).

(2)

Energyconsumption based on 160 drying cycles of the standard cotton programme at full and partial

load,and the consumption of the low-power modes. Actual energy consumption per cycle will depend on

how the appliance is used.

(3) “Cotton cupboard dry programme” used at full and partial load is the standard drying programme to

which the information in the label and the fiche relates, that this programme is suitable for drying normal

wet cotton laundry and that it is the most efficient programme in terms of energyconsumption for cotton.

(4) Scale from G (least efficient) to A (most efficient).

(5) Weighted average value - L wA expressed in dB(A) re 1 pW.

Stránka sa načítava ...

Kernau KFD 8503.1 Návod na obsluhu

Značka: Kernau

Model: KFD 8503.1

Typ: Návod na obsluhu

Stiahnite si PDF

správa

Kernau KFD 8503.1 Návod na obsluhu

Kernau KFD 8503.1 Návod na obsluhu

Súvisiace články

Ďalšie dokumenty