Creality CR-10 3D Printer Používateľská príručka

3D Printer CR-10

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

2

English

3 – 20

Čeština

21 – 38

Slovenčina

39 – 56

Magyar

57 – 75

Deutsch

76 – 94

3

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4

Dear consumers,

Thank you for choosing our products. For the best experience, please read the

instructions before operating the Printer. Our teams will always be ready to render you

the best services. Please contact us via the phone number or e-mail address provided at

the end when you encounter any problem with the printer. For a better experience in

using our product, you can also learn how to use the printer in the following ways:

1) View the accompanied instructions and videos in the storage card.

2) Visit our official website www.creality.com to find relevant software/hardware

information, contact details, operation, and maintenance instructions.

Firmware upgrade

Please login the official website https://www.creality.com/download, switch the language

and select the relevant printer and model and download the required firmware.

Notes

1) Do not use the printer any way other than described herein to avoid personal injury

or property damage.

2) Do not place the printer near any heat source or flammable or explosive objects.

We suggest placing it in a well-ventilated, low-dust environment.

3) Do not expose the printer to violent vibration or any unstable environment, as this

may cause poor print quality.

4) Please use recommended resin to in case damage of machine.

5) Do not use any other power cable except the one supplied. Always use a grounded

three-prong power outlet.

6) Please do not open the plastic cover during usage, otherwise the printing will

be interrupted.

7) Do not wear cotton gloves when operating the printer. Such cloths may become tangled

in the printers moving parts leading to burns, possible bodily injury, or printer damage.

8) Please wait a moment after the print is finished. And please wear gloves to take out

the print by tools.

9) Clean the printer frequently. Always turn the power off when cleaning, and wipe with a

dry cloth to remove dust, adhered printing plastics or any other material off the frame,

guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

10) Children under 10 years should not use the printer without supervision.

5

11) This machine is equipped with a security protection mechanism. Do not manually

move the nozzle and printing platform mechanism manually while booting up,

otherwise the device will automatically power off for safety.

12) Users should comply with the laws and regulations of the corresponding

countries and regions where the equipment is located (used), abide by

professional ethics, pay attention to safety obligations, and strictly prohibit the use

of our products or equipment for any illegal purposes. Creality will not be

responsible for any violators' legal liability under any circumstances.

Introduction

1

Z Gantry frame

8

Platform

14

Extruder (E)

stepper

2

Nozzle kit

9

Filament holder

15

X limit switch

3

TF slot and USB port

10

Control box

16

X stepper

4

Display screen

11

Nozzle assembly

connection

17

Z stepper

5

Control knob

18

Z limit switch

6

Voltage selection

12

Platform connection

19

Y limit switch

7

Base frame

13

Power cable

connection

20

Y stepper

6

Equipment parameters

Basic parameters:

Model

CR-10

CR-10S

CR-10 S4

CR-10 S5

CR-10mini

Printing size

300x300x

400 mm

300x400x

400 mm

400x400x

400 mm

500x500x

500 mm

300x220x

300 mm

Moulding tech.

FDM

Nozzle number

1

Slice thickness

0,1 mm-0,4 mm

Nozzle

diameter

Standard 0,4 mm

Precision

±0,1 mm

Filament

1,75 mm PLA

File format

STL/OBJ/AMF

Working mode

Online or TF card offline

Slice software

Creality Slicer/Cura/Repetier-Host/Simplify3D

Power supply

Input: AC 115 V/230 V 50/60 Hz, Output: DC 12 V

Total power

270 W

Bed temp.

≤100˚C

≤60˚C

≤100˚C

Nozzle temp.

≤250˚C

Resume print

No

Yes

Filament

detector

No

Yes

No

Dual Z-Axis

No

Yes

No

Language

selection

No

EN/CN

No

Operating

system

Windows XP/Vista/7/8/10 MAC/Linux

Printing speed

≤180 mm/s, Normal 30-60 mm/s

General list

Toolbox

Control box

Base frame

Century frame

7

Tool list:

No.

Image

Name

Quantity

1

Spool & Nuts

1

2

Spool Holder

1

3

TF Card & Card Reader

1

4

T-Bracket (Right)

1

5

T-Bracket & Z Limit Switch (Left)

1

6

M5X25 Bolt & Lock Washer

4

7

Power Cable

1

8

USB Cable

1

9

PTFE Tubing (spare part)

1

10

Nozzle Cleaner

1

11

Filament (200 g)

1

12

Diagonal Pliers

1

13

Spade

1

14

Cable Ties

1

15

Hex keys, Wrench & Screwdriver

1

16

Spare Parts

1

17

Decorative Strip

1

18

Thumb Screw

3

Tips: The above accessories are for reference only, please refer to the physical accessories!

*CR- 10 mini without T- Bracket (Right) & Decoration Strip.

8

Device installation

Install the Gantry Frame

Install the T- shaped fixing block

Note: Make sure that the nut for profile has been turned

by 90° before fastening the T- shaped fixing block.

*CR- 10 mini without T- Bracket (right).

Connect the Stepper Motors according to

the yellow labels on the 6pin (4- wire) side.

Connect the Limit Switches according to the

yellow labels on the 3pin (2- wire) side.

1) Select the correct input voltage to match

your local mains (230 V or 115 V).

2) Damage can occur if voltage is set

incorrectly.

3) Make sure the power cable is connected.

Connect the aviation connectors to the

ports with corresponding pins.

M5X25 4pcs

9

Install the Rack

Install decoration strip

Install decoration belt into the

notch, starting from one end.

Cut off the excess material

with the diagonal pliers.

Attach the Decorative Trim to all

parts needing to be decorated.

*The decoration Strip is available in various colours. The pictures above are for

reference only. *CR- 10mini without Decoration Strip.

Y Stepper and Limit Switch

Extruder (E) Stepper

X Stepper and Limit Switch

Z Stepper and Limit Switch

Attach the Bracket with

two thumb screws

Attach Spool Holder

with included Nuts

Finished

10

Screen information

Screen Options

Menu

Sub Menu

Explanation

Info Screen

Main

Return

Prepare→

Disable Steppers

Moving X Y Z axis by your hands

Auto Home

Return to the origin

Preheat PLA

Preheat ABS

Cooldown

Close and cooldown the Nozzle

Move Axis

Moving X Y Z axis or Extruder by given value

Control→

Temperature

Heat the nozzle and the bed or change fan

speed by given value

Restore Failsafe

Restore factory setting

No card/Print from SD

Select the printing model

Init. SD-Card/Change SD-

Card

Download or update the memory card information

Printing

Tune→

Speed

Change Printing Speed by given value

Nozzle

Change the temperature by given value

Bed

Change the temperature by given value

Fan Speed

Change Fan Speed by given value

Flow

Change filament flow by given value

Pause Print

Stop Print

Print Speed

Device Model

Push: OK/Enter Sub Menu

Turn: Change Option/Value

Set Temperature of the Nozzle

Current Temperature of the Nozzle

Set Temperature of the Hot Bed

Current Temperature of the Hot Bed

Part Cooling Fan Speed

Current Location of the Nozzle

Print Time

Print Progress

Prompt Message

11

Loading filament

1. Preheat

Method 1:

Method 2:

2. Feed filament

Press and hold the extruder lever then insert the1.75 mm filament through the small

hole of the extruder. Continue feeding until you see filament come out the Nozzle.

Tip: How to Replace the Filament?

1) Cutting filament near the Extruder and slowly feed new filament until they are

fed into the new filament.

2) Preheating the nozzle and withdraw the filament quickly and feed the new filament.

12

V wheel levelling

Before starting up, please check the tightness of the V wheel.

Adjustable eccentric isolation column

X/Y axis V wheel adjustment:

Gently dial the V-wheel by hand to check whether it is idling or

stuck. If this phenomenon occurs, use an open-end wrench to

adjust the eccentric isolation column to make it rotate smoothly.

Z axis V wheel adjustment:

Gently dial the V-wheel by hand to check whether it is idling. If this

phenomenon occurs, use an open-end wrench to adjust the

eccentric isolation column counterclockwise so that the V-wheel has

no idling. Power on and click on the interface to return to the origin.

After returning to the origin, move the Z axis separately, and feel

whether the printing platform is stuck. If there is a stuck, adjust the

eccentric spacer clockwise to make it move smoothly.

13

Platform adjustment

1. Prepare → Auto Home, waiting for the Nozzle to move to the left/front of

the platform → Prepare → Disable Steppers (Close stepper drive, release Motor)

2. Move the Nozzle the front/left levelling screw and adjust the platform height by

turning the knob underneath. Use a piece of A4 paper (standard printer paper) to

assist with the adjustment, making sure that the Nozzle lightly scratches the paper.

3. Complete the adjustment of the screw on all 4 corners.

4. Repeat above steps 1-2 times if necessary.

The Nozzle is too far away from the

platform, so the consumables can not

adhere to the platform.

Filament are extruded evenly, just sticking

on the platform.

The Nozzle is too close to the platform

and the filament are not extruded

enough, even scraping the platform.

Software installation

1. Double click to

install the software.

2. Double click to open

the software.

14

3. Select language → Next → Select your machine → Next → Finish.

First printing

1. Slicing

Open the software → Load → Select the file → Wait for slicing to finish and save the

code file to TF card.

2. Printing

Insert the TF card → Print → Select the file to be printed.

WARNING: Please don't insert or remove storage card.

15

FDM 3D printing filaments

HP-PLA

CR-PLA CR-PETG

CR-ABS CR-TPU

Upgraded environmentally friendly

formula, matte effect, high toughness,

and fine printing. The raw materials are

imported from the United States,

besides, there are rich colours for

customers to choose.

Targeting at mid-end users, CR series is with

transparent tray plus black-white colour box

design. It’s slight tolerance in wire diameter

contributes to stable printing quality. CR

series meets your demands of daily design

and prototype making.

HC-PLA HC-PETG

HC-ABS HC-TPU

EN-PLA EN-PETG

EN-ABS EN-TPU

HC series is cost-efficient. It’s widely

applicable to general FDM printer

product designs on the market to meet

your daily design and different

prototyping needs.

Ender series is widely applied to general

FDM printer design, which meet customers'

needs of daily design and different

prototyping needs.

3D printer UV sensitive resin

Standard resin

Low shrinkage, fast printing speed, almost odourless, and it’s equipped with rigidity and

toughness, suitable for printing common product prototypes and display models, that’s

also highly compatible with LCD printers.

Low odour resin

Low odour, high precision, detail textures are very expressive. Good fluidity, high

printing success rate. Rich colours, to meet the customer's colour needs, preferred for

animation manual, craft furnishing industry, etc.

ABS like resin

With high hardness, high toughness of physical properties and strong impact resistance, it can

be directly drilled on the finished models, mainly used in industrial prototype and other fields.

16

Dental cast resin

Low shrinkage, due to the low shrinkage characteristics, the size is more accurate. It’s

not easy to deform under pressure after moulding. Used for making porcelain teeth.

Elastic resin

Elastic Resin features good elasticity after high strength extruding or stretching, widely

applied to damping and contacting surfaces, etc., preferred to be used by people full of

originality and ideas in design.

Water washable resin

The model can be washed with water directly, and it’s safe, environmentally friendly,

with high surface accuracy, short cleaning time and low material cost. Water Washable

Resin is currently one of the favourite new materials for schools, educational

institutions, and printing enthusiasts.

Dental mode resin

The surface hardness is extremely high, scratch-resistant, and has low shrinkage

characteristics. It is mainly used in dental implant restoration and invisible braces

printing in medical dentistry.

Toughness resin

Toughness Resin is a medium-hard, wear-resistant, and repeatedly stretchable material.

It is used in parts which need to be repeatedly stretched in friction devices.

High temperature resin

High Temperature Resin is mainly used in making high temperature rubber moods,

which can withstand temperatures of about 200℃ without cracking and maintain good

strength, stiffness, and thermal stability.

Jewellery cast resin

Widely applied to jewellery industry. Excellent combustion performance, low expansion

coefficient, combustion without residue. Forming process is stable without deformation.

The finished product has smooth surface and high precision.

17

UV sensitive resin parameter information

1) Standard resin

2) ABS like resin

3) Dental

cast resin

4) Elastic resin

Viscosity

150-350MPa·s

(NDJ-8S Rotational

Viscometer 25℃)

200-350MPa·s

(NDJ-8S Rotational

Viscometer 25℃)

50-170MPa·s (NDJ-

8S Rotational

Viscometer 25℃)

300-1000MPa·s

(NDJ-8S Rotational

Viscometer 25℃)

Absorption

band

355nm-410nm

385nm-410nm

Liquid

density

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.13g/cm³

(Density meter

25℃)

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.25g/cm³

(Density meter

25℃)

Flexural

modulus

1.882-2.385Mpa

1.192-2.525Mpa

1.192-2.525MPa

1.882-2.385Mpa

Bending

strength

59-70MPa

68-80MPa

49-58MPa

40-70MPa

Heat

distortion

temperature

80℃

75℃

80℃

Thermal

expansion

coefficient

95*E-6

Volume

shrinkage

3.72-4.24 %

1.88-2.45 %

3.72-4.24 %

Linear

shrinkage

1.05-1.35 %

0.8-1 %

1.05-1.35 %

Tensile

strength

36-52MPa

42-62MPa

30-52MPa

Tensile

modulus

1.779-2.385MPa

1.86-2.645MPa

1.779-2.385MPa

Elongation

at break

11 %-20 %

11 %-21 %

11 %-20 %

200 %

Shore

hardness

84D

75-80D

80-88D

20-30D

Glass

transition

temperature

100℃

78℃

100℃

Solid density

1.05-1.25g/cm³

1.05-1.13g/cm³

1.05-1.25g/cm³

Notched

impact

strength

44-49J/m2

60-80J/m2

44-49J/m2

41-48J/m2

18

5) Water

washable resin

6) Dental mode

resin

7) Toughness

resin

8) High

temperature

resin

9) Jewellery cast

resin

100-350MPa·s

(NDJ-8S Rotational

Viscometer 25℃)

150-300MPa·s

(NDJ-8S Rotational

Viscometer 25℃)

150-300MPa·s

(NDJ-8S

Rotational

Viscometer 25℃)

150-300MPa·s

(NDJ-8S

Rotational

Viscometer 25℃)

100-150MPa·s

(NDJ-8S

Rotational

Viscometer 25℃)

385nm-410nm

355nm-410nm

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.25g/cm³

(Density meter

25℃)

1.05-1.13g/cm³

(Density meter

25℃)

1.882-2.385Mpa

1.192-2.525Mpa

40-70MPa

59-70MPa

40-70MPa

59-70MPa

49-58MPa

80℃

220℃

65℃

95*E-6

3.72-4.24 %

1.56-1.95 %

3.72-4.24 %

1.56-1.95 %

1.05-1.35 %

0.85-1.05 %

1.05-1.35 %

30-52MPa

42-62MPa

30-52MPa

36-52MPa

42-62MPa

1.779-2.385MPa

1.86-2.645MPa

120 %

11 %-20 %

130 %

11 %-20 %

80-85D

82D

65-75D

86D

65D

100℃

78℃

1.05-1.25g/cm³

1.05-1.13g/cm³

41-48J/m2

44-49J/m2

19

Filament’s parameter information

Material

Print

Temp (℃)

Bed

Temp (℃)

Difficulty

Flexibility

Shrinkage

Ductility

PLA

Series

HP-

PLA

190-220

50-60

HP-

PLAx3

190-220

50-60

CR-PLA

190-220

50-60

HC/EN-

PLA

190-220

50-60

ABS

220-260

90-100

PETG

230-250

60-100

TPU

210-240

50

Silk

190-220

50-60

Nylon

230-260

80-90

Carbon

(Ordinary type)

190-220

50-60

PDS Advertising

word filament-

PLA

190-220

50-60

Low

temperature

filament-PCL

60-100

-

Applicable Models:

PLA Series, Silk, Carbon (Ordinary type)

Suitable for 99% FDM models

ABS, PETG, Nylon

Hot bed is needed, and Creality printer enclosure is

recommended for DIY machine

TPU

Direct extrusion models

PDS Advertising word filament-PLA

Creality K5, K8, T5

Low temperature filament-PCL

Low temperature 3D printing pen

20

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation, and service of the

product.

• Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g., during transport,

cleaning by inappropriate means, etc.).

• Natural wear and aging of consumables or components during use (such as

batteries, etc.).

• Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

• If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

WEEE

This product must not be disposed of as normal household waste in accordance with

the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).

Instead, it shall be returned to the place of purchase or handed over to a public

collection point for the recyclable waste. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. Contact your local authority or the nearest collection point for further

details. Improper disposal of this type of waste may result in fines in accordance with

national regulations.

Stránka sa načítava ...

Creality CR-10 3D Printer Používateľská príručka

Creality CR-10 3D Printer Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty