Sony XR-CA600 Návod na používanie

GB

CZ

PL

TR

RU

FM/MW/LW Cassette Car Stereo

3-227-102-31 (1)

Operating Instructions

Návod k obsluze

Instrukcje Obs³ugi

Kullanım kılavuzu

Инструкция по эксплуатации

XR-CA600X XR-L500X

XR-CA600V XR-L500V

XR-CA600 XR-L500

For installation and connections, see the supplied installation/connections manual.

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace/zapojení.

Szczegó³y dotycz¹ce instalacji i pod³¹czeñ, proszê sprawdziæ w dostarczonym, osobnym

podreczniku.

Kurma ve baðlantý iþlemleri için ünite beraberýndeki Kurma/Bagiantýiar kýiavuzuna

bakýnýz.

Перед установкой и подсоединениями прочитайте прилагаемую инструкцию по

установке и подсоединению.

FM

/

MW

/

LW

Cassette Car Stereo

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. You can enjoy its various features even

more with:

• Optional controller accessories

Rotary commander RM-X4S

Card remote commander RM-X114

XR-CA600X/CA600V/CA600 only

• Optional CD/MD units (both changers and

players)*

1

.

• CD TEXT information (displayed when a CD

TEXT disc*

2

is played on a connected optional

CD unit with the CD TEXT function).

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

3

Table of Contents

Location of controls . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7

Detaching the front panel . . . . . . . . . . . . . . . 7

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8

Cassette Player

Listening to a tape . . . . . . . . . . . . . . . . . . . . . 9

Playing a tape in various modes . . . . . . . . . . 9

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 10

Receiving the stored stations. . . . . . . . . . . . 10

Storing only the desired stations . . . . . . . . . 11

Tuning in a station through a list

(XR-CA600X/CA600V/CA600 only)

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 11

RDS

Overview of RDS . . . . . . . . . . . . . . . . . . . . 12

Automatic retuning for best reception results

— AF function . . . . . . . . . . . . . . . . . . . . 12

Receiving traffic announcements

— TA/TP . . . . . . . . . . . . . . . . . . . . . . . . 13

Presetting RDS stations with

AF and TA setting. . . . . . . . . . . . . . . . . . 14

Tuning in stations by programme type

— PTY . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting the clock automatically

— CT . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Other Functions

Using the rotary commander. . . . . . . . . . . . 16

Adjusting the sound characteristics. . . . . . . 17

Quickly attenuating the sound. . . . . . . . . . . 17

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting the sound position

— My Best sound Position (MBP). . . . . 19

Setting the equalizer . . . . . . . . . . . . . . . . . . 19

CD/MD Unit (optional)

(XR-CA600X/CA600V/CA600 only)

Playing a CD or MD. . . . . . . . . . . . . . . . . . 20

Display items . . . . . . . . . . . . . . . . . . . . . . . 21

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 21

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 21

Labelling a CD

— Disc Memo . . . . . . . . . . . . . . . . . . . . 22

Locating a disc by name

— List-up. . . . . . . . . . . . . . . . . . . . . . . . 23

Selecting specific tracks for playback

— Bank . . . . . . . . . . . . . . . . . . . . . . . . . 23

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 24

Removing the unit. . . . . . . . . . . . . . . . . . . . 25

Specifications . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 27

Error displays . . . . . . . . . . . . . . . . . . . . . . . 28

4

Location of controls

Refer to the pages listed for details.

: During tape playback : During radio reception : During menu mode

: During CD/MD playback (optional) (XR-CA600X/CA600V/CA600 only)

a Volume control dial 13

b MBP button 19

c SOURCE (Power on/Tape/Radio/CD*

1

/

MD*

1

) button 5, 9, 10, 11, 13, 19, 20,

22

d Display window

e Z (eject) button (located on the front side

of the unit, behind the front panel) 9

f Receptor for the card remote

commander

g MENU button 8, 9, 10, 14, 15, 18, 19,

20, 22, 23, 24

h DISPLAY/PTY (display mode change/

programme type) button*

1

12, 15, 21,

22

i SCROLL button*

1

21

j OPEN button 7, 9

k XR-CA600X/CA600V/CA600:

LIST button

11

22, 23

XR-L500X/L500V/L500:

PTY/DSPL button 12, 15

l EQ7 button 19

m RESET button (located on the front side of

the unit, behind the front panel) 7

n Number buttons

(3) REP 9

10, 11, 13, 14

(3) REP 21

(6) SHUF 21

o MODE (o) button

9

10, 11, 13

20, 22

p SOUND button 17, 19

q AF button 12, 14

r TA button 13, 14

s OFF (Stop/Power off) button*

2

5, 7, 9,

20

t ENTER button

11, 14

8, 9, 10, 15, 18, 19, 20, 22, 23,

24

22, 23

*1 XR-CA600X/CA600V/CA600 only

*2 Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

(OFF) on the unit for 2 seconds to turn off

the clock display.

Otherwise, the clock display does not turn off

and this causes battery drain.

TAPE RADIO MENU

CD/MD

XR-CA600X/CA600V/CA600

1

2

3

4

5

6

AF

TA

O

FF

D

S

MENU

LIST

SOUND

ENTER

MBP

SOURCE

REP

SHUF

MODE

EQ 7

D

I

S

C

/

P

R

E

S

E

T

SEEKSEEK

DISPLAY

O

P

EN

PTY

S

C

R

O

LL

RADIO

CD/MD

TAPE

RADIO

CD/MD

TAPE

RADIO

CD/MD

RADIO

MENU

CD/MD

5

u XR-CA600X/CA600V/CA600:

DISC/PRESET buttons (+/–)

XR-L500X/L500V/L500:

PRESET buttons (+/–)

10, 11, 15

8, 9, 10, 14, 15, 18, 19, 20, 22,

23, 24

20, 22, 23

v SEEK buttons (–/+)

9

10, 11, 13

8, 9, 15, 17, 18, 19, 20, 24

20, 22, 23

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b MENU button

c SOURCE button

d SEEK (</,) buttons

e SOUND button

f OFF button

g VOL (–/+) buttons

h MODE button

i LIST button*

3

j DISC*

3

/PRESET(M/m) buttons

k ENTER button

l ATT button

*3 Not available for XR-L500X/L500V/L500

Note

If the units is turned off by pressing (OFF) for 2

seconds, it cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed,

or a cassette is inserted to activate the unit first.

Tip

Refer to “Replacing the lithium battery” for details on

how to replace the batteries (page 25).

AF

TA

O

FF

D

S

MENU

LIST

SOUND

ENTER

D

I

S

C

/

P

R

E

S

E

T

SEEKSEEK

DISPLAY

O

P

E

N

SC

R

O

LL

PTY

(SEEK)

(–): to select

leftwards/

.

(SEEK)

(+): to select

rightwards/

>

(DISC/PRESET)/(PRESET)

(+): to select upwards

In menu mode, the currently selectable button (s)

of these four are indicated with a “ M” in the display.

(DISC/PRESET)/(PRESET)

(–): to select downwards

RADIO

MENU

CD/MD

TAPE

RADIO

MENU

CD/MD

Card remote commander RM-X114

(optional)

DISC

–

ATTOFF

DSPL MODE

SOURCE

DISC

+

VOL

+

–

PRESET

+

SEEK

+

SEEK

–

PRESET –

SOUND

E

N

TER

MENU

LIST

6

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• If no power is being supplied to the unit, check

the connections first. If everything is in order,

check the fuse.

• If no sound comes from the speakers of a two-

speaker system, set the fader control to the

centre position.

• When a tape is played back for a long period,

the cassette may become warm because of the

built-in power amplifier. However, this is not a

sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

To maintain high quality sound

Be careful not to splash juice or other soft drinks

onto the unit or tapes.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while playing

the cassette. The cassette player head should be

cleaned after each 50 hours of use.

The use of cassettes longer than 90 minutes

is not recommended except for long

continuous play

The tape used for these cassettes is very thin and

tends to stretch easily.

Frequent playing and stopping of these tapes

may cause them to become entangled in the

cassette deck mechanism.

Slack

7

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset the

unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

Tape playback or radio reception stops (the

key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

2 Press ( OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in parked

cars or on dashboards/rear trays.

Tip

When carrying the front panel with you, use the

supplied front panel case.

RESET button

continue to next page t

1

2

8

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Note

Do not put anything on the inner surface of the front

panel.

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side

of (DISC/PRESET) or (PRESET)

repeatedly until “CLOCK” appears.

1Press (ENTER).

The hour indication flashes.

2Press either side of (DISC/PRESET)

or (PRESET) to set the hour.

3Press the (+) side of (SEEK).

The minute indication flashes.

4Press either side of (DISC/PRESET)

or (PRESET) to set the minute.

2 Press (ENTER).

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tips

• You can set the clock automatically with the RDS

feature (page 15).

• When D.INFO mode is set to ON, the time is always

displayed (page 18).

x

9

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, press (SOURCE)

repeatedly until “FORWARD” or “REVERSE”

appears to start playback.

FORWARD: The side facing up is played.

REVERSE: The side facing down is played.

Note

The AMS function may not work when:

– the blanks between tracks are shorter than 4

seconds.

– there is noise between tracks.

– there are long sections of low volume or quiet

sections.

Playing a tape in various

modes

You can play the tape in various modes:

• METAL lets you play a metal or CrO

2 tape.

• BL.SKP (Blank Skip) skips blanks longer than

8 seconds.

• ATA (Automatic Tuner Activation) turns on the

tuner automatically when fast-winding the tape.

1 During tape playback, press (MENU).

2 Press either side of (DISC/PRESET) or

(PRESET) repeatedly until the desired

mode appears.

3 Press (+) side of (SEEK) to select

“ON.”

Example: ATA mode

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select

“OFF” in step 3.

Playing tracks repeatedly

— Repeat Play

During playback, press (3) (REP)

repeatedly until “REP-ON” in the

display appears.

To return to normal playback mode, select “REP-

OFF.”

Tip

During repeat playback, press (MODE). “REP”

disappears from the display and repeat mode is

cancelled.

To Press

Change the tape’s

playback direction

(MODE) (o)

Stop playback (OFF)

Eject the cassette (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (m/M)

[hold to desired point]

10

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press either side

of (DISC/PRESET) or (PRESET)

repeatedly until “BTM” appears.

4 Press (ENTER).

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

Tip

Press either side of (DISC/PRESET) or (PRESET) to

receive the stations in the order they are stored in the

memory (Preset Search function).

If preset tuning does not work

Press either side of (SEEK) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals (see “Changing the sound and display

settings” on page 18).

• If you know the frequency of the station you want to

listen to, press and hold either side of (SEEK) to

locate the approximate frequency, then press

(SEEK) repeatedly to fine adjust to the desired

frequency (manual tuning).

If FM stereo reception is poor

Select monaural reception mode.

(see “Changing the sound and display

settings” on page 18). The sound improves,

but becomes monaural (“ST” disappears).

11

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK) to tune in

the station that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Tuning in a station through a

list (XR-CA600X/CA600V/

CA600 only)

— List-up

1 During radio reception, press (LIST)

momentarily.

The frequency or the name assigned to the

station currently tuned in flashes.

2 Press either side of (DISC/PRESET)

repeatedly until you find the desired

station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the desired

station.

12

RDS

Overview of RDS

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio programme signal. For

example, one of the following will be displayed

upon receiving a station with RDS capability.

RDS services

RDS data offers you other conveniences, such as:

• Automatic retuning of a programme, helpful

during long-distance drives. — AF t page 12

• Receiving traffic announcements, even

when enjoying another programme/source. —

TA t page 13

• Selecting stations by the type of programme

it broadcasts. — PTY t page 14

• Automatic clock time setting. — CT t page

15

Notes

• Depending on the country or region, not all of the

RDS functions are available.

• RDS may not work properly if the signal strength is

weak or if the station you are tuned to is not

transmitting RDS data.

Automatic retuning for best

reception results

— AF function

The alternative frequencies (AF) function allows

the radio to always tune into the area’s strongest

signal for the station you are listening to.

1 Select an FM station (page 10).

2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

frequency with a stronger signal in the same

network.

If “NO AF” flashes, the currently tuned into

station does not have an alternative frequency.

Note

When there is no alternative frequency in the area or

when you do not need to search for one, turn the AF

function off by selecting “AF-OFF.”

To Press

Switch display

item

(DISPLAY/PTY) or

(PTY/DSPL)

Displayable items

• Music source

• Clock

• Function

Displayable items

• Station name (frequency)

• Programme type

Frequencies change automatically.

98.5 MHz

Station

102.5 MHz

96.0 MHz

13

For stations without alternative

frequencies

Press either side of (SEEK) while the

station name is flashing (within 8

seconds).

The unit starts searching for another

frequency with the same PI (Programme

Identification) data (“PI SEEK” appears).

If the unit cannot find the same PI, the unit

returns to the previously selected frequency.

Staying with one regional programme

When AF function is on: this unit’s factory-set

setting restricts reception to a specific region, so

you won’t be switched to another regional station

with a stronger frequency.

If you leave this regional programme’s reception

area or would like to take advantage of the whole

AF function, select “REG-OFF” from the MENU

(page 18).

Note

This function does not work in the United Kingdom

and in some other areas.

Local Link function

(United Kingdom only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 Press a number button ((1) to (6))

that has a local station stored on it.

2 Within 5 seconds, press the number

button of the local station again.

3 Repeat this procedure until the

desired local station is received.

Receiving traffic

announcements

— TA/TP

By activating the Traffic Announcement (TA)

and Traffic Programme (TP), you can

automatically tune in an FM station broadcasting

traffic announcements. These settings function

regardless of the current FM programme/source,

CD/MD; the unit switches back to the original

source when the bulletin is over.

Press (TA) repeatedly until “TA-ON”

appears.

The unit starts searching for traffic

information stations.

“TP” indicates reception of such stations, and

“TA” flashes during an actual traffic

announcement. The unit will continue

searching for stations available with TP if

“NO TP” is indicated.

To cancel all traffic announcements, select “TA-

OFF.”

Tip

You can also cancel the current announcement by

pressing (SOURCE) or (MODE).

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so you won’t miss hearing them.

1 Turn the volume control dial to adjust

the desired volume level.

2 Press (TA) for 2 seconds.

“TA” appears and the setting is stored.

Receiving emergency announcements

If either AF or TA is on, the unit will switch to

emergency announcements, if one comes in

while listening to an FM station, a tape, or

optional CD/MD.

To Press

Cancel current

announcement

(TA)

14

Presetting RDS stations with

AF and TA setting

When you preset RDS stations, the unit stores

each station’s AF/TA setting (on/off) as well as

its frequency. You can select a different setting

(for AF, TA, or both) for individual preset

stations, or the same setting for all preset

stations. If you preset stations with “AF-ON” the

unit automatically stores stations with the

strongest radio signal.

Presetting the same setting for all

preset stations

1 Select an FM band (page 10).

2 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

Note that selecting “AF-OFF” or “TA-OFF”

stores not only RDS stations, but also non-

RDS stations.

3 Press (MENU), then press either side

of (DISC/PRESET) or (PRESET)

repeatedly until “BTM” appears.

4 Press (ENTER) until “BTM” flashes.

Presetting different settings for each

preset station

1 Select an FM band, and tune in the

desired station (page 11).

2 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

3 Press the desired number button ((1)

to (6)) until “MEM” appears.

Repeat from step 1 to preset other stations.

Tuning in stations by

programme type

— PTY

You can tune in a station by selecting the type of

programme you would like to listen to.

Note

You cannot use this function in some countries where

no PTY (Programme Type selection) data is available.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Va ri ed VAR IE D

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

15

1 Press (DISPLAY/PTY) or (PTY/DSPL)

during FM reception until “PTY”

appears.

The current programme type name appears if

the station is transmitting the PTY data.

“- - - - - - - -” appears if the received station is

not an RDS station, or if the RDS data is not

received.

2 Press (DISC/PRESET ) or (PRESET)

repeatedly until the desired

programme type appears.

The programme types appear in the order

shown in the table.

“- - - - - - - -” appears if the programme type

is not specified in the RDS data.

3 Press (ENTER).

The unit starts searching for a station

broadcasting the selected programme type.

Setting the clock

automatically

— CT

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 During radio reception, press (MENU),

then press either side of

(DISC/PRESET) or (PRESET) repeatedly

until “CT-OFF” appears.

2 Press the (+) side of (SEEK) repeatedly

until “CT-ON” appears.

The clock is set.

3 Press (ENTER) to return to the normal

display.

To cancel the CT function, select “CT-OFF” in

step 2.

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

16

Other Functions

You can also control the unit (and optional CD/

MD units*

1

) with a rotary commander

(optional).

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

*1 XR-CA600X/CA600V/CA600 only

*2 Only if the corresponding optional equipment is

connected (XR-CA600X/CA600V/CA600 only).

*3 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for 2

seconds to turn off the clock indication after turning

off the ignition.

By rotating the control

Rotate and release to:

– Locate the beginning of tracks on the tape.

– Tune in stations automatically.

– Skip tracks on the disc.*

2

Rotate, hold, and release to:

– Fast-wind the tape.

– Find a station manually.

– Fast-forward/reverse a track.*

2

Tip

To start playback while fast-winding the tape, press

(MODE).

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change the disc*

2

.

Press To

(SOURCE)

Change source

(radio/CD*

2

/MD*

2

/Tape)

(MODE)

Change operation

(radio band/CD unit*

2

/MD

unit*

2

/tape playback

direction)

(ATT) Attenuate sound

(OFF)*

3

Stop playback or radio

reception

(SOUND) Adjust the sound menu

(DSPL) Change the display item

SOUND

DSPL

MODE

SOUND

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SOUND)

(ATT)

(MODE)

(DSPL)

(OFF)

SEEK/AMS

control

PRESET/

DISC control

17

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for 2 seconds while

pushing the VOL control.

Tip

You can also change the operative direction of these

controls with the unit (see “Changing the sound and

display settings” on page 18).

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

The bass and treble levels can be stored

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

Each time you press (SOUND), the item

changes as follows:

BAS (bass) t TRE (treble) t BAL (left-

right)

t FAD (front-rear)

2 Adjust the selected item by pressing

either side of (SEEK).

When adjusting with the rotary commander,

press (SOUND) and rotate the VOL control.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT) on the rotary commander

or card remote commander.

After “AT T- ON ” momentarily appears, the

“AT T” appears in the display.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

To increase

To decrease

18

Changing the sound and

display settings

— Menu

The following items can be set:

SET (Set Up)

• CLOCK (page 8)

• CT (Clock Time) (page 15)

• BEEP — to turn the beeps on or off.

• RM (Rotary Commander) — to change the

operative direction of the controls of the rotary

commander.

– Select “NORM” to use the rotary commander

as the factory-set position.

– Select “REV” when you mount the rotary

commander on the right side of the steering

column.

DSPL (Display)

• D.INFO (Dual Information) — to display the

clock and the play mode at the same time (ON).

• AMBER/GREEN — to change the

illumination colour to amber or green (XR-

CA600/L500 only).

• DIM (Dimmer) — to change the brightness of

the display (XR-CA600V/L500V only).

– Select “ON” to dim the display.

– Select “OFF” to deactivate the Dimmer.

• M.DSPL (Motion Display) — to select the

Motion Display mode from “1,” “2,” and

“OFF.”

– Select “1” to show decoration lines in the

display and activate Demo display.

– Select “2” to show decoration lines in the

display and deactivate Demo display.

– Select “OFF” to deactivate the Motion

Display.

• A.SCRL (Auto Scroll)*

– Select “ON” to scroll all automatically

displayed names exceeding 8 characters.

– When Auto scroll is set to off and the disc/

track name is changed, the disc/track name

does not scroll.

* When no CD or MD is playing, this item will not

appear. (XR-CA600X/CA600V/CA600 only)

SND (Sound)

• LOUD (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will

be reinforced (XR-CA600V/CA600/L500V/

L500 only).

P/M (Play Mode)

• LOCAL-ON/OFF (Local seek mode) (page 10)

– Select “ON” to only tune into stations with

stronger signals.

• MONO-ON/OFF (Monaural mode) (page 10)

– Select “ON” to hear FM stereo broadcast in

monaural. Select “OFF” to return to normal

mode.

• REG-ON/OFF (Regional) (page 13)

1 Press (MENU).

To set A.SCRL, press (MENU) during CD/

MD Playback.

2 Press either side of (DISC/PRESET ) or

(PRESET) repeatedly until the desired

item appears.

3 Press the (+) side of (SEEK) to select

the desired setting (Example: ON or

OFF).

4 Press (ENTER).

After the mode setting is completed, the

display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET,”

“DSPL,” “SND,” “P/M,” and “EDIT”) by pressing either

side of (DISC/PRESET) or (PRESET) for 2 seconds.

19

Selecting the sound position

— My Best sound Position (MBP)

When you drive without passengers, you can

enjoy the most comfortable sound environment

with “My Best sound Position.”

“My Best sound Position” has two presets, which

adjust the sound level of balance and fader. You

can select one very easily with the MBP button.

Press (MBP) repeatedly for the desired

listening position.

The mode of “My Best sound Position” is

shown in the display in order of the table.

After one second, the display goes back to the

normal playback mode.

If you want to adjust the sound level of

balance and fader more precisely, you can do

it using the (SOUND) button (see “Adjusting

the sound characteristics” on page 17).

Notes

• When the BAL (balance) or FAD (fader) in “Adjusting

the sound characteristics” (page 17) is adjusted, the

MBP setting returns to OFF.

• When MBP is set to OFF, the BAL and FAD setting is

activated.

Setting the equalizer

You can select an equalizer curve for seven

music types (XPLOD, VOCAL, CLUB, JAZZ,

NEW AGE, ROCK, CUSTOM, and OFF

(equalizer OFF)).

You can store and adjust the equalizer settings

for frequency and level.

Selecting the equalizer curve

1 Press (SOURCE) to select a source

(radio, CD, MD, or tape).

2 Press (EQ7) repeatedly until the

desired equalizer curve.

Each time you press (EQ7), the item

changes.

To cancel the equalizing effect, select “OFF.”

After 3 seconds, the display returns to the

normal playback mode.

Adjusting the equalizer curve

1 Press (MENU).

2 Press either side of (DISC/PRESET) or

(PRESET) repeatedly until “EQ7

TUNE” appears, then press (ENTER).

3 Press either side of (SEEK) to select

the desired equalizer curve, then

press (ENTER).

Each time you press (SEEK), the item

changes.

Display

window

Balance Level Fader Level

Right Left Front Rear

MBP-A

– 4dB 0 0 – 4dB

MBP-B 0 – 4dB 0 – 4dB

MBP-OFF

0000

continue to next page t

20

4 Select the desired frequency and level.

1 Press either side of (SEE K) to select

the desired frequency.

Each time you press (SEEK), the

frequency changes.

62 (Hz) y 157 (Hz) y 396 (Hz) y

1k (Hz) y 2.5k (Hz) y 6.3k (Hz) y

16k (Hz)

2 Press either side of (DISC/PRESET )

or (PRESET) to adjust the desired

volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,

press (ENTER) for 2 seconds.

5 Press (MENU) twice.

When the effect setting is complete, the

normal playback mode appears.

CD/MD Unit (optional)

(XR-CA600X/CA600V/CA600

only)

This unit can control external CD/MD units.

If you connect an optional CD unit with the CD

TEXT function and the custom file function, the

CD TEXT information will appear in the display

when you play a CD TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select

“CD” or “MD.”

2 Press (MODE) repeatedly until the

desired unit appears.

CD/MD playback starts.

To Press

Stop playback (OFF)

Skip discs

–Disc selection

(DISC/PRESET) (+/–)

Skip tracks

–Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (m/M)

[hold to desired point]

Stránka sa načítava ...

Sony XR-CA600 Návod na používanie

Táto príručka je tiež vhodná pre

Sony XR-CA600 Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty