Sony CDX-2500R Návod na obsluhu

Operating Instructions

Návod k obsluze

Instrukcje Obsługi

Kullanım kılavuzu

Инструкция по эксплуатации

 2000 Sony Corporation

GB

CZ

TR

PL

FM/MW/LW

Compact Disc

Player

CDX-2500R

For installation and connections, see the supplied installation/connections

manual.

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /

zapojení.

Szczegóły dotyczące instalacji i podłączeń, proszę sprawdzić w dostarczonym,

osobnym podręczniku

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

Перед установкой и подключениями обратитесь к прилагаемой инструкции

по установке и соединению.

3-043-127-41 (1)

RU

2

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features as well as an optional rotary

commander.

3

Table of Contents

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 5

Detaching the front panel .................................. 5

Setting the clock .................................................. 6

CD Player

Listening to a CD ................................................ 7

Playing a CD in various modes ........................ 8

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 8

Memorising only the desired stations .............. 9

Receiving the memorised stations .................... 9

RDS

Overview of the RDS function ........................ 10

Displaying the station name ............................ 10

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 11

Listening to traffic announcements ................ 12

Presetting the RDS stations with the AF and

TA data .......................................................... 13

Locating a station by programme type .......... 14

Setting the clock automatically ....................... 15

Other Functions

Labelling the rotary commander .................... 15

Using the rotary commander .......................... 16

Adjusting the sound characteristics ............... 17

Attenuating the sound ..................................... 17

Changing the sound and display settings ..... 18

Boosting the bass sound

— D-bass ....................................................... 19

Additional Information

Precautions ......................................................... 19

Maintenance....................................................... 21

Dismounting the unit ....................................... 21

Specifications ..................................................... 22

Troubleshooting guide ..................................... 23

4

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control 7, 9, 11,

14

2 MODE (band/unit select) button 8, 9

3 SOURCE (source select) button 7, 8, 9,

13

4 Dial (volume/bass/treble/left-right/

front-rear) 6, 17

5 SOUND button 17

6 DSPL (display mode change) button

7, 10, 11

7 Display window

8 PTY button 14

9 6 (eject) button 7

0 AF/TA button 11, 12, 13

!¡ RELEASE (front panel release) button

5, 20

!™ Reset button (located on the front side

of the unit behind the front panel) 5

!£ OFF button* 5, 7

!¢ SHIFT button

PLAY MODE 8, 9, 10, 12, 13

REP 8

SET UP 6, 15, 18

SHUF 8

!∞ During radio reception:

Number buttons 9, 12, 13

!§ D-BASS control 19

*Warning when installing in a car

without ACC (accessory) position

on the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

RELEASE

SEEK/AMS

SOUND

PTY

AF/TA

D - BASS

MODE

SOURCE

2 3 4 5 6 7 8 9110

OFF

SHIFT

DSPL

D

CDX–2500R

OFF

1

2

3

5

Reset button

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Notes

• Pressing the reset button will erase the clock

setting and some memorised functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. If you insert a disc within

these 10 seconds, the unit will not be reset, and

you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

(OFF)

(RELEASE)

a

b

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Attaching the front panel

Attach part a of the front panel to part b of

the unit as illustrated and push until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

6

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (SHIFT), then press (2) (SET UP)

repeatedly until “CLOCK” appears.

1 Press (4) (n).

2 Set the hour.

3 Press (4) (n).

4 Set the minute.

to go forward

to go backward

to go forward

to go backward

The hour indication flashes.

The minute indication flashes.

2 Press (SHIFT).

The clock starts.

3 Press (SHIFT).

After the clock setting is complete, the

display returns to normal playback mode.

SOURCE

7

CD Player

Listening to a CD

Insert a CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears to start

playback.

Note

To play an 8 cm CD, use the optional Sony compact

disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

Labelled side up

Track number

Elapsed playing time

Changing the display item

Each time you press (DSPL) during CD

playback, the item changes as follows:

Track number/Elapsed playing time ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 18).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down and release for each

track you want to skip.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down and hold. Release

when you have found the desired point.

Note

If “

” or “ ” appears in the

display, that means you have reached the

beginning or the end of the disc and you cannot

go any further.

CD indication

To search backward

To search forward

SEEK/AMS

To locate preceding tracks

To locate succeeding tracks

8

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW, and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

3 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (4) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5 Press (SHIFT).

Playing a CD in various

modes

You can play CDs in various modes:

•REP (Repeat Play) repeats the current track.

•SHUF (Shuffle Play) plays all the tracks in

random order.

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

Every time you press (SHIFT), only the

items you can select light up.

2 Press (6) (REP) repeatedly until ”REP-1“

appears.

Repeat Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“REP-OFF” in step 2 above.

Playing tracks in random order

— Shuffle Play

1 During playback, press (SHIFT).

2 Press (7) (SHUF) repeatedly until ”SHUF-

1“ appears.

Shuffle Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“SHUF-OFF” in step 2 above.

z FM1 z FM2 z MW z LW

z TUNER z CD

D

2 3 4 5 6 7 81

OFF

SHIFT

DSPL

D

9

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (10)) on

which the desired station is stored.

If you cannot tune in a preset

station

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (3) (PLAY MODE) repeatedly

until “LOCAL” (local seek mode) is displayed. Then

press (4) (n) to select “LOCAL-ON.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, push the SEEK/AMS control up or

down and hold until the desired frequency

appears (manual tuning).

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

Memorising only the

desired stations

You can preset up to 20 FM stations (10 each

for FM1 and 2), up to 10 MW stations, and up

to 10 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

10

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 8).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

until “MONO” appears.

2 Press (4) (n) repeatedly until “MONO-

ON“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To return to normal playback mode, select

“MONO-OFF” in step 2 above.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

Frequency ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 18).

11

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA-OFF” appears.

Changing the displayed item

Each time you press (AF/TA), the item changes

as follows:

* Select this to turn on both the AF and TA

functions.

Notes

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI SEEK” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the previously

selected frequency.

continue to next page n

” TA-ON ” AF TA-ON*

AF-ON “ AF TA-OFF “

Changing the displayed item

Each time you press (DSPL), the item changes

as follows:

Frequency (Station Name) ˜ Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

”Changing the sound and display settings” on

page 18).

Note

“NO NAME” appears if the received station does

not transmit RDS data.

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 8).

2 Press (AF/TA) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Frequencies change automatically.

98.5MHz

Station

96.0MHz

102.5MHz

12

Listening to a regional programme

The “REG-ON” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG-ON,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (SHIFT),

then press (3) (PLAY MODE) repeatedly

until “REG” appears.

2 Press (4) (n) repeatedly until “REG-OFF”

appears.

3 Press (SHIFT).

Note that selecting “REG-OFF” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG-ON” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (AF/TA) repeatedly until “TA-ON”

or “AF TA-ON” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcement of other stations in the same

network.

13

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE).

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until

“AF TA-OFF” appears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 8).

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

both AF and TA functions).

Note that selecting “AF TA-OFF” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “BTM” appears.

4 Press (4) (n) until ”B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station (page 9).

2 Press (AF/TA) repeatedly to select either

“AF-ON”, “TA-ON” or “AF TA-ON” (for

both AF and TA functions).

3 Press the desired number button until

“MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

14

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

1 Press (PTY) during FM reception until

“PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY) repeatedly until the desired

programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Push the SEEK/AMS control up or down.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previous selected station.

15

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 During radio reception, press (SHIFT),

then press (2) (SET UP) repeatedly until

“CT” appears.

2 Press (4) (n) repeatedly until “CT-ON”

appears.

The clock is set.

3 Press (SHIFT) to return to the normal

display.

To cancel the CT function

Select “CT-OFF” in step 2 above.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

SOUND

LIST

MODE

SOUND

LIST

MODE

Other Functions

You can also control this unit with an optional

rotary commander.

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

shown in the illustration below.

16

By rotating the control

(the SEEK/AMS control)

Rotate the control momentarily and

release it to:

• Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

• Tune in stations automatically. Rotate and

hold the control to find a specific station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

• Receive the stations memorised on the

number buttons.

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

(the SOURCE and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER ˜ CD

Pressing (MODE) changes the operation

in the following ways;

• Tuner: FM1 n FM2 n MW n LW

(SOURCE)

(MODE)

17

Changing the operative direction

The operative direction of controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Tip

You can also change the operative direction of

these controls with the unit (page 18).

Rotate the VOL control to

adjust the volume.

Press (OFF) to

turn off the

unit.

Press (SOUND) to adjust the

volume and sound menu.

To increase

To decrease

Press (LIST) to display the programme

type names (FM tuner only).

Press (ATT) to

attenuate the

sound.

Other operations

OFF

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n BAS (bass) n

TRE (treble) n BAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary

commander.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes

in (Telephone ATT function).

18

Changing the sound and

display settings

The following items can be set:

•CLOCK (page 6).

•CT (Clock Time) (page 15).

•D.INFO (Dual Information) - to display the

clock and the play mode at the same time

(ON) or to display the information

alternately (OFF).

• BEEP - to turn on or off the beeps.

• RM (Rotary Commander) - to change the

operative direction of the controls of the

rotary commander.

— Select “NORM” to use the rotary

commander as the factory-set position.

— Select “REV” when you mount the rotary

commander on the right side of the

steering column.

•M.DSPL (Motion Display) - to turn the

motion display on or off.

1 Press (SHIFT).

2 Press (2) (SET UP) repeatedly until the

desired item appears.

Each time you press (2) (SET UP), the item

changes as follows:

CLOCK n CT n D.INFO* n BEEP n RM n

M.DSPL

* When no CD or MD is playing, this item will

not appear.

Note

The displayed item will differ depending on

the source.

3 Press (4) (n) to select the desired

setting (Example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the

display returns to normal playback mode.

19

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass

sound. The D-bass function boosts the low

frequency signal with a sharper curve than

conventional bass boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasize and adjust the bass sound

easily with the D-BASS control.

Adjusting the bass curve

Turn the D-BASS control to adjust the

bass level (1, 2 or 3).

“D-BASS” appears in the display.

To cancel, turn the control to OFF.

Note

If the bass sound becomes distorted, adjust the D-

BASS control or volume.

Level

Frequency (Hz)

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of

2-speaker systems, set the fader control to the

centre position.

• If your car is equipped with a power aerial, it

will extend automatically while the unit is

operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on handling CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc by its edge. To keep the

disc clean, do not touch the surface.

Do not stick paper or tape on the labelled

surface.

continue to next page n

20

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in temperature

inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray intended for analog discs.

Notes on discs

If you use the discs explained below, the sticky

residue can cause the CD to stop spinning and

may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that

have a sticky residue on the surface (for

example from peeled-off stickers or from ink,

or glue leaking from under the stickers).

There are paste residue

Ink is sticky

Do not use rental CDs with old labels that are

beginning to peel off.

Stickers that are beginning

to peel away, leaving a

sticky residue

Do not use your CDs with labels or stickers

attached.

Labels are attached

Notes on moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD player. Should this occur, the unit will

not operate properly. In this case, remove the

disc and wait for about an hour until the

moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

damage.

Stránka sa načítava ...

Sony CDX-2500R Návod na obsluhu

Sony CDX-2500R Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty