Philips TBC Používateľská príručka

QP6520, QP6510

15

14

13

1

QP6520

QP6510

QP6520 QP6520

2

7

8

11

4

3

5

6

9

10

12

empty page before TOC

English 6

Čeština 24

Eesti 43

Hrvatski 61

Latviešu 80

Lietuviškai 99

Magyar 118

Polski 137

Română 158

Shqip 179

Slovenščina 197

Slovensky 215

Srpski 235

Български 253

Македонски 274

Русский 294

Українська 314

Қазақша

333

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

General description (Fig.1)

1 Blade

2 Blade release slide

3 Travel lock (QP6520 only)

4 Battery status percentage (QP6520 only)

5 Charge symbol (QP6520 only)

6 Display (QP6520 only)

7 On/off button

8 Battery status indicator (QP6510 only)

9 Charging stand (QP6520 only)

10 Small plug of the charging stand (QP6520 only)

11 Pouch (QP6520 only)

12 Small plug

13 Supply unit (adapter, type HQ8505)

14 Precision trimming comb

15 Hair length setting wheel

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

6

English

Warning

- To charge the battery, only use the

detachable supply unit (HQ8505) provided

with the appliance.

- The supply unit contains a transformer. Do

not cut off the supply unit to replace it with

another plug, as this causes a hazardous

situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved. Children shall not play

with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

- Always unplug the appliance before you

clean it under the tap.

- Always check the appliance before you use

it. Do not use the appliance if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

7

English

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the charging

stand in water and do not rinse

it under the tap.

- Do not use the supply unit in or

near wall sockets that contain

an electric air freshener to

prevent irreparable damage to

the supply unit.

- Only use this appliance for its

intended purpose as shown in

the user manual.

- For hygienic reasons, the

appliance should only be used

by one person.

- Never use water hotter than

60°C to rinse the appliance.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the appliance.

8

English

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This appliance is waterproof. It is suitable for

use in the bath or shower and for cleaning

under the tap. For safety reasons, the appliance

can therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

- Maximum noise level: Lc = 75dB(A).

Charging

Note: This appliance can only be used without

cord.

QP6520, QP6510: Charging takes approx. 1 hour. A

fully charged appliance has an operating time of

up to 90 minutes (QP6520) or 60 minutes

(QP6510).

Charge the appliance before you use it for the first

time and when the charge symbol indicates that

the battery is almost empty.

Battery status indicator QP6520

- When the charge symbol flashes orange, the

battery is almost empty. The remaining battery

capacity is indicated by the battery status

percentage shown on the display.

9

English

- To indicate that the appliance is charging, the

charge symbol flashes white.

- Quick charge: after approx. 5 minutes charging,

the appliance contains enough energy for 5

minutes using. During quick charge the charge

symbol flashes white quickly until quick charge

is finished.

- The battery is fully charged when the battery

status percentage shown on the display is 100%

and the charge symbol lights up continuously.

- Approx. 30 minutes after the battery is fully

charged or when you disconnect the appliance

from the mains, the display switches off

automatically.

Battery status indicator QP6510

- When the battery status indicator flashes

orange, the battery is almost empty.

- To indicate that the appliance is charging, first

the bottom light flashes white and then lights

up white continuously. Then the second light

flashes and then lights up continuously, and so

on until the appliance is fully charged.

- Quick charge: after approx. 5 minutes charging,

the appliance contains enough energy for 5

minutes using. During quick charge the lights of

the battery status indicator will light up

continuously one after another and then all

switch off. This will repeat itself until quick

charge is finished.

- The battery is fully charged when all lights of

the battery status indicator light up

continuously.

10

English

- Approx. 30 minutes after the battery is fully

charged or when you disconnect the appliance

from the mains, the lights of the battery status

indicator switch off automatically.

Charging with the adapter

1 Insert the small plug into the appliance and put

the supply unit in the wall socket.

2 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Charging in the charging stand (QP6520 only)

1 Insert the small plug into the charging stand

and put the adapter in the wall socket.

2 Put the appliance in the charging stand.

3 After charging, remove the adapter from the

wall socket and pull the small plug out of the

charging stand.

Using the appliance

You can use the appliance to trim, edge or shave

facial hair (beard, moustache and sideburns).

Shave for a smooth result, trim to obtain a certain

length and edge to create perfect edges and sharp

lines. This appliance is not intended for shaving,

edging or trimming hairs on lower body parts or

scalp hair. Take your time when you first start to

use the appliance. You have to acquire practice

with the appliance.

11

English

Note: This appliance can only be used without

cord.

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once.

2 To switch off the appliance, press the on/off

button once.

Before you use the appliance, always check

the blade for damage or wear. If the blade is

damaged or worn, do not use the appliance,

as injury may occur. Replace a damaged

blade before you use the appliance (see

chapter ‘Replacement’).

Shaving tips and tricks

- Make sure that the blade is in full contact with

the skin by placing it flat on the skin.

- For the best result, move the appliance against

the grain.

- Make long strokes while pressing lightly.

- You can use the appliance dry or wet with gel or

foam. You can even use the appliance in the

shower.

- Shaving a clean beard and face gives the best

results.

1 Switch on the appliance.

2 Place the blade on the skin and move the

appliance up or against the grain in long strokes

while you press it lightly.

12

English

Note: Make sure you hold the surface of the

blade flat against your skin.

3 Switch off and clean the appliance after every

use (see ‘Cleaning and maintenance’).

Edging

You can also use both edges of the blade to create

sharp lines and perfect edges. Hold the appliance

in such a way that the blade is perpendicular to

the skin and one of its edges touches the skin. This

allows more precise detailing of sideburns and the

area around the mouth and nose.

1 To create sharp edges and lines, you can use

either edge of the blade.

2 Switch on the appliance.

3 Place the edge of the blade perpendicular onto

the skin.

- Make straight strokes while applying gentle

pressure.

4 Switch off and clean the appliance after every

use (see ‘Cleaning and maintenance’).

13

English

Trimming with comb

Tips

- Always trim in the direction of the teeth of the

precision trimming comb making sure the flat

part of the comb is in full contact with the skin

for an even trimming result.

- Since hair grows in different directions, you

need to hold the appliance in different

positions as well. However, always make sure

that you move the appliance upwards against

the grain.

- Trimming is easier when the skin and hair are

dry.

The precision trimming comb allows you to trim

hair to different lengths. Start at the highest setting

to acquire practice with this appliance. The

settings on the wheel correspond to the hair

lengths in millimeters.

1 2

1 Place the front part of the comb onto the blade

and push the projection at the back of the

comb into the appliance (‘click’).

2 Turn the hair length setting wheel to select the

desired hair length setting.

The settings on the wheel correspond to the

hair lengths in millimeters.

- QP6520

14

English

- QP6510

3 Switch on the appliance.

4 Place the comb onto the skin and move the

appliance upwards slowly, against the grain.

5 Switch off and clean the appliance after every

use (see ‘Cleaning and maintenance’).

1

2

6 To remove the comb, pull its back part off the

appliance and then slide it off the blade.

Cleaning and maintenance

Clean the appliance after every use.

Caution: Never use compressed air, scouring

pads, abrasive cleaning agents or aggressive

liquids such as petrol or acetone to clean the

appliance.

Caution: Do not tap the appliance against a

surface to remove water from it, as this may

cause damage. Replace the blade if it is

damaged.

15

English

Cleaning the appliance

1

2

1 Remove the comb from the blade. Always turn

the appliance off before putting on or taking off

the comb.

2 If a lot of hairs have accumulated on the comb,

first blow them off.

3 If a lot of hairs have accumulated on the

appliance, first blow them off.

4 Then switch on the appliance and rinse the

blade with lukewarm water.

Caution: Do not dry the blade with a towel or a

tissue as this may cause damage.

5 Then rinse the comb with lukewarm water.

6 Let the appliance and comb dry.

Note: The blade is fragile. Handle it carefully.

Replace the blade if it is damaged.

16

English

Storage

Note: We advise you to let the appliance and its

attachments dry before you store them for the

next use.

1 2

1 Always attach the precision trimming comb on

the blade to protect the blade from damage

during travelling or storage.

Travel lock (QP6520 only)

You can lock the appliance when you are going to

travel. The travel lock prevents the appliance from

being switched on by accident.

Activating the travel lock

3 sec.

1 Press the on/off button for 3 seconds.

- While you activate the travel lock, the travel lock

symbol lights up and the digital display counts

down.

- When the travel lock is activated, the travel lock

symbol flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

- While you deactivate the travel lock, the display

counts down. Then the travel lock symbol lights

up and switches off.

- The appliance is now ready for use again.

17

English

Replacement

Usage indicator

For optimal cutting and gliding performance, we

advise you to replace the blade every 4 months,

when it no longer provides the shaving or trimming

results you expect or when the usage indicator

appears.

The blade is equipped with a usage indicator

which gradually turns green. When the green bar is

highly visible, it is recommended to replace your

blade. Always replace the blade with an original

Philips blade.

Depending on your usage behavior, the exact

lifetime of the blade could be longer or shorter.

Similar to a manual blade, the blade becomes

blunt over time, which results in increased hair

pulling and reduced cutting performance.

Replacing the blade

2

1

1 Push the blade release slide upwards carefully,

and hold the blade on both sides to remove the

blade. This will prevent the blade from flying off

the handle.

2 Hold the new blade on its sides and press it

onto the handle (‘click’).

Note: When you hear a click, the new blade is

placed correctly and ready for use.

Ordering accessories

To buy accessories or spare parts, visit

www.shop.philips.com/service or go to your

18

English

Philips dealer. You can also contact the Philips

Consumer Care Center in your country (see the

international warranty leaflet for contact details).

The following parts are available:

- QP210 Blade 1-pack

- QP220 Blade 2-pack

Recycling

- This symbol means that this product shall not

be disposed of with normal household waste

(2012/19/EU).

- This symbol means that this product contains a

built-in rechargeable battery which shall not be

disposed of with normal household waste

(2006/66/EC). Please take your product to an

official collection point or a Philips service

center to have a professional remove the

rechargeable battery.

- Follow your country’s rules for the separate

collection of electrical and electronic products

and rechargeable batteries. Correct disposal

helps prevent negative consequences for the

environment and human health.

Removing the rechargeable battery

Caution: Only remove the rechargeable battery

when you discard the appliance. Make sure the

battery is completely empty when you remove it.

Note: We strongly advise you to have a

professional remove the rechargeable battery.

1 Disconnect the appliance from the mains and

let the appliance run until the motor stops.

2 Remove the blade from the appliance.

19

English

3 Insert a screwdriver under the back panel and

remove the panel.

4 Break the snap connections on both sides with

the screwdriver.

5 Push out the inner body by pushing the

screwdriver into the bottom of the handle.

- Now you see the printed circuit board.

6 QP6510: remove the cover of the printed circuit

board with the screwdriver.

7 Remove the printed circuit board from the inner

body with the screwdriver.

20

English

Stránka sa načítava...

Philips TBC Používateľská príručka

Philips TBC Používateľská príručka

v iných jazykoch

Súvisiace články

Ostatné dokumenty