Stránka sa načítava...
Wi-Fi Module
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch • Manuel d'utilisation
2
English
3 – 17
Čeština
18 – 32
Slovenčina
33 – 47
Magyar
48 – 62
Deutsch
63 – 77
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
4
App Download
Go to APP store or Google market and search “Smart Life”, download and install the APP,
then start it.
Register
If you are new user, you will need registering: Register → Input your mobile phone
number → Get verification code → Input the verification code → Set the password →
Complete.
After registering, then create family: Click “Me” button at the bottom right corner, click
“faminily management”, then input family named, add family location and room, then
click “Done”.
5
Login
Login with existing account.
If you have forgotten your password, you can select the verification code to log in. Select
“Login” with SMS Verification Code”, input the mobile phone number, and click “Get
Verification Code”, then input the verification code you got by SMS.
6
After creating a family or logging in, enter the smart life app, interface, can do family or
room management as below pictures shown.
Wi-Fi Module Configuration Step:
Method: 1 (Intelligent network connection mode):
Step 1: When the heat pump is powered on at first time, it can connect the network in
10 seconds. After 10 seconds, you need to press the button to connect.
Manually enter the intelligent network connection mode: press button “ ” and button
“ ” on controller for 5 seconds to enter the connection state, icon “ ” will blink. After
the Wi-Fi module connecting with the network, the icon “ ” will not be displayed.
7
In the Wi-Fi module doesn’t connect with the network, after 3 minutes, the icon “ ” will
stop blinking not be displayed, and the intelligent network connection mode will exit. To
re-enter the intelligent network connection mode, it needs to press again the button “ ”
and the “ ” button for 5 seconds.
Step 2: Make your phone connect to Wi-Fi at good network connection status.
Step 3: Open the “Smart Life APP”, enter into the main interface, click the button “+” in
the top right corner or click the button. “Add Device”, then click “All devices” in the top
right corner and select the type of device “Large Home Appliance” and select “Water
Heater”, then enter into the interface of “Add Device”.
8
Step 4: After entering the “Add Device” interface, please confirm that the controller has
selected the intelligent network connection mode and the icon “ ” is blinking quickly,
then click “Confirm the indicator rapidly blink”.
Enter into the Wi-Fi connection interface, input the password of Wi-Fi connected in the
phone. Click “OK”, then enter into the device connection status, and wait for the loading
of 100%. Note: When the Wi-Fi module is connected to the Wi-Fi, the “ ” icon blinks
slowly.
Step 5: After the App successfully connect to the device, as below shown “Device added
successfully” you can change the device name and set the installing location. Then click
“Done”, it will enter into the device operation interface.
Note: If the connection fails, you can manually enter AP network connection mode again,
and reconnect according to the above steps.
9
Method 2 (Ap network connection mode):
Step 1: Press “ ” button on the controller for 5 seconds to enter the AP
network connection mode, the icon “ ” will blink. Then WIFI module can be ready to
connect with network. After the WIFI module connection with the network, the icon “ ”
will not be displayed. If the WIFI module doesn’t connect with the network, after 3
minutes the “ ” will stop blinking and not be displayed, and the AP network connection
mode will exit. To enter the AP network connection mode, it need to press again the
button “ ” on the controller for 5 seconds.
Step 2: Make your phone connect to WIFI at good network connection status.
Step 3: Open the “Smart Life” APP, enter into the main interface, click the button “+” in
the top right corner or click the button “Add Device”, then click “All devices” in the top
right corner and select the type of device “Large Home Appliance” and select “Water
Heater”, then enter into the interface of “Add Device”
10
Step 4: Enter the interface of “Add device”, click “AP” mode in the top right corner, it will
enter interface of “Add Device” under AP mode. Confirm the controller to select the AP
network connection mode (icon “ ” is blinking), click “Confirm indicator slowly blink”.
Then it will Pop up of the WIFI connection interface, input the WIFI password which must
be same as the password of WIFI connected to the phone, click “confirm”, then it will pop
up “connect your mobile phone to the device’s hot spot”, click “Go connect”. It will enter
into the connection interface of phone WIFI, connect the “SmartLife-XXX”, as per picture
shown: SmartLife-801A. After connected successfully return “Smart Life” APP, the APP
will enter into the device connection status automatically, it will complete until the
loading up to 100%
11
Step 5: After the App successfully connect to the device, as below shown “Device added
successfully”, you can change the device named and set the installing location. Then click
“Done”, it will enter into the device operation interface.
Note: If the connection fails, you can manually enter the AP network connection mode
again and reconnect according to the above steps.
12
APP Function Operation
After the device is successfully added, the user can enter into the device operation
interface by going to the main interface and clicking the added device, then below
function can be operated.
Edit: can edit device
name, select device
location, check device
network, share device,
create group, view
devive information,
feedback, check for
firmware update and
etc.
Desired temperature
adjustment: the white
circle slides
counterclocwise to
reduce the temperature,
and the clocwise slide
increases the
Desired heating
temperature
On/off: click to turn
on/off
Timing: Click to add
timed on/off time
Mode switching: Click to
select heating mode or
cooling mode, or auto
mode.
Current operating
mode
Pool temperature
Failure alert: if any
failure happedn, it
will alert
Return
13
Modify the device name
Click button and click “Device Name”, can modify the device name.
Share device
1. Click button and click “Share Device”, can share device to other users’ account.
2. Click “Add Sharing” and input the shared account and click “Finishing”. The
sharing success list shows the newly added account.
14
3. The shared account will receive the shared device shown as below, and he can
operate the shared device.
15
Mode setting
Click “ ” mode switch in the main interface of the device operation, the mode
selection interface will pop us as shown below, click the mode you want to select.
Timing settings
Click “ ” in the main interface of the device operation to enter the timing setting
interface, as shown below, click Add Timing: Enter the timing setting, slied the
hour/minute up and sown to set the timing time, and set the repeating date and on/off,
press the upper right corner to save, as shown in the below pictures.
16
Remove Device
Remove device by controller
1. When the device has been added by intelligent network connection mode, need
to remove the device, press button “ ” and button “ ” for 5 seconds at the
same time. The device will be removed and re-enter into intelligent network
connection mode. The “ ” icon will blink for 3 minutes. The network can be
reconfigured within 3 minutes. After 3 minutes, the intelligent network
connection mode will exit.
2. When the device has been added by AP network connection mode, need to
remove the device, press button “ ” for 5 seconds at the same time.
The device will be removed and re-enter into AP network connection mode. The
“ ” icon will blink for 3 minutes. The network can be reconfigured within 3
minutes. After 3 minutes, the AP network connection mode will exit.
Remove device by APP
Click “ in the upper right corner of the device operation interface to enter the device
details interface. Click “Remove device”, device will be removed, and it enters into
intelligent network connection mode. The “ ” icon will blink for 3 minutes, and the
network can be reconfigured within 3 minutes. After 3 minutes, the intelligent network
connection mode will exit.
17
Warranty Conditionsd
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
• Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
• Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as
batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
18
Vážený zákazníku,
Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě
přečtěte následující pokyny a uschovejte si tento návod pro budoucí použití. Zvláštní
pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli dotazy nebo
připomínky, obraťte se na zákaznickou linku.
✉ www.alza.cz/kontakt
✆ +420 255 340 111
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
19
Stažení aplikace
Přejděte do obchodu APP Store nebo Google Play, vyhledejte "Smart Life", stáhněte a
nainstalujte aplikaci a poté ji spusťte.
Registrace
Pokud jste nový uživatel, musíte se zaregistrovat: Registrace:→ Zadejte číslo svého
mobilního telefonu→ Získejte ověřovací kód→ Zadejte ověřovací kód→ Nastavte heslo→
Dokončete.
Po registraci vytvořte rodinu: Poté klikněte na tlačítko "Me" v pravém dolním rohu,
klikněte na "Family management", zadejte jméno rodiny, přidejte umístění rodiny a
pokoj a klikněte na "Done".
20
Přihlášení
Přihlaste se pomocí stávajícího účtu.
Pokud jste zapomněli heslo, můžete se přihlásit pomocí ověřovacího kódu. Vyberte
možnost "Přihlásit se pomocí ověřovacího kódu SMS", zadejte číslo mobilního telefonu a
klikněte na tlačítko "Získat ověřovací kód" a poté zadejte ověřovací kód, který jste
obdrželi prostřednictvím SMS.
/
