EKOM DK50 2V/50 Používateľská príručka

DK50 2V/50/M

DK50 2x2V/110/M

NÁVOD NA POUŽITIE

SK

USER MANUAL

EN

BENUTZERHANDBUCH

DE

COMPRESSOR

KOMPRESSOR

KOMPRESOR

DK50 2V/50

DK50 2x2V/110

EKOM spol. s r. o.

Priemyselná 5031/18

SK-921 01 Piešťany

Slovak Republic

tel.: +421 33 7967255

fax: +421 33 7967223

www.ekom.sk

email: ekom@ekom.sk

DATE OF LAST REVISION

DATUM DER LETZTEN ÜBERARBEITUNG

DÁTUM POSLEDNEJ REVÍZIE

11/2023

NP-DK50 2V 50, 2x2V 110-AD-

A-8_11-2023

112000519-000

CONTENTS ................................................................................................. 5

INHALT ........................................................................................................ 74

OBSAH ........................................................................................................ 143

CONTENTS

11/2023 5 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

CONTENTS

GENERAL INFORMATION ............................................................................................................ 6

1. CONFORMITY WITH THE REQUIREMENTS OF THE EUROPEAN UNION ................... 6

2. SYMBOLS ........................................................................................................................ 6

3. DEVICE USE ................................................................................................................... 7

4. GENERAL SAFETY INSTRUCTIONS .............................................................................. 8

5. STORAGE AND TRANSPORT CONDITIONS ................................................................. 9

PRODUCT DESCRIPTION .......................................................................................................... 10

6. VARIANTS ..................................................................................................................... 10

7. ACCESSORIES ............................................................................................................. 11

8. PRODUCT FUNCTION .................................................................................................. 12

TECHNICAL DATA ...................................................................................................................... 19

INSTALLATION ........................................................................................................................... 29

9. INSTALLATION CONDITIONS ...................................................................................... 29

10. COMPRESSOR ASSEMBLY ......................................................................................... 29

11. PNEUMATIC CONNECTION ......................................................................................... 34

12. ELECTRICAL CONNECTION ........................................................................................ 36

13. PLACEMENT OF THE COMPRESSOR IN THE CABINET ............................................ 37

14. COMMISSIONING ......................................................................................................... 43

15. PNEUMATIC AND ELECTRICAL DIAGRAMS ............................................................... 44

OPERATION ................................................................................................................................ 50

16. SWITCHING ON THE COMPRESSOR .......................................................................... 51

17. SWITCHING OFF THE COMPRESSOR ........................................................................ 51

AD DRYER .................................................................................................................................. 52

18. PRINCIPLE OF OPERATION ........................................................................................ 52

19. USER INTERFACE/SETTINGS ..................................................................................... 53

20. MAIN SCREENS ............................................................................................................ 55

21. INDICATION OF MAINTENANCE AND ALARM STATES.............................................. 58

PRODUCT MAINTENANCE ........................................................................................................ 61

22. PRODUCT MAINTENANCE ........................................................................................... 61

23. LONG-TERM SHUTDOWN ............................................................................................ 70

24. DISPOSAL OF DEVICE ................................................................................................. 70

TROUBLESHOOTING ................................................................................................................. 71

25. REPAIR SERVICE ......................................................................................................... 73

ANNEX ...................................................................................................................................... 211

26. INSTALLATION RECORD ........................................................................................... 211

GENERAL INFORMATION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 6 11/2023

GENERAL INFORMATION

Carefully read this user manual before using the product and carefully store it for future reference.

The user manual aids in the proper use, including installation, operation and maintenance, of the

product.

The user manual corresponds to the configuration of the product and its compliance with

applicable safety and technical standards at the time of its printing. The manufacturer reserves all

rights for the protection of its configuration, processes and names.

The Slovak version represents the original version of the user manual. The translation of the user

manual is performed in accordance with the best available knowledge. The Slovak version is to be

used in the event of any uncertainties.

The user manual is original and the translation is performed with the best available knowledge.

1. CONFORMITY WITH THE REQUIREMENTS OF THE EUROPEAN UNION

This product conforms to the requirements of the European Union 2006/42/EC, 2014/29/EU,

2014/35/EU, 2014/30/EU, 2011/65/EU and is safe if used in compliance with the intended use and

if all safety instructions are followed.

User manual is in compliance with requirements of Directive 2006/42/EC.

2. SYMBOLS

The following symbols and marks are used in the User manual, on the device and its packaging:

General warning

Warning - risk of electric shock

Warning - compressor is controlled automatically

Warning - hot surface

General caution

Read the operating instructions

Refer to instruction manual

CE – marking

Serial number

Article number

Protecting earthing

GENERAL INFORMATION

11/2023 7 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

Fuse

Package handling label – fragile

Package handling label – this side up

Package handling label – keep dry

Package handling label – temperature limits

Package handling label – limited stacking

Package label – recyclable material

Manufacturer

3. DEVICE USE

3.1. Intended use

The compressor is used as source of clean oil-free compressed air intended to be used in industry

and laboratories, where parameters and properties of the compressed air are suitable.

The compressor is exclusively intended to compress air without content of explosive or chemically

unstable substances.

The compressor is intended for operation in clean and dry rooms.

3.2. Incorrect use

Contamination risk.

Air from the compressor is without additional treatment not suitable for

breathing and direct contact with food

Explosion risk.

The product is not intended for operation in rooms with explosion risk.

The compressor must not be used to compress aggressive gases.

The compressor must not be operated in premises with occurrence of flammable vapors.

The compressor must not be operated in other conditions as mentioned in Technical data.

Any other use of the product beyond the intended use is considered as incorrect use. The

manufacturer is not responsible for any damages or injuries as a result of incorrect use or

disobedience to instructions stated in this User manual. All risks shall be solely borne by the

user/operator.

GENERAL INFORMATION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 8 11/2023

4. GENERAL SAFETY INSTRUCTIONS

The product is designed and manufactured so that any risks connected with its use are minimized

and the product is safe for the user and surrounding when used according to the intended use and

the instructions stated below are followed.

4.1. Required qualification of the personnel

• Each user must be trained by the manufacturer or an organization authorized by the

manufacturer or instructed on the device operation by other trained user.

• Installation, new settings, changes, extensions and repairs of the product may be performed by

the manufacturer or an organization authorized by the manufacturer (hereinafter qualified

technician).

- Otherwise the manufacturer is not responsible for safety, reliability and correct functioning

of the product.

4.2. General instructions

• When operating the compressor, all acts and local regulations valid in the place of use must be

observed. The operator and user are responsible for following the applicable regulations.

• Before every use, the user must check, if the device is functioning correctly and safely. Before

building the compressor in other devices, the supplier must assess, if the supplied air and

construction of the device comply with the requirements of the specified intended use. Taking

this into account, follow the product technical data. Assessment of conformity shall be

performed by the manufacturer – supplier of the final product.

4.3. Protection from dangerous voltage and pressure

• The equipment may only be connected to a properly installed socket connected to earth

(grounded).

• Before the product is plugged in, make sure that the mains voltage and frequency stated on the

product are the same as the power mains.

• Check for any damage to the connected compressed air system and electrical circuits before

use. Replace damaged pneumatic and electrical conductors immediately.

• Immediately disconnect the product from the mains (remove the power cord from the socket) in

hazardous situations or when a technical malfunction occurs.

• Never adjust or use the safety valve to release the air pressure in the air tank.

• Never adjust or use pressure relief valves to release air pressure from the device.

4.4. Original spare parts and accessories

• Only the use of original parts guarantees the safety of operating personnel and flawless

operation of the product itself. Only accessories and replacement parts specified in the

technical documentation or expressly approved by the manufacturer may be used.

• The warranty does not cover damage resulting from the use of other accessories and

replacement parts as specified or recommended by the manufacturer and the manufacturer has

no related liability.

GENERAL INFORMATION

11/2023 9 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

5. STORAGE AND TRANSPORT CONDITIONS

The compressor is shipped from the manufacturer in transport packaging. This protects the

product from damage during transport.

Potential for damage to pneumatic components.

The compressor must be transported only when all air has been vented. Before

moving or transporting the compressor, release all the air pressure from the tank

and pressure hoses and drain condensate from the tank and from the condensate

separator on the dryer.

Keep the original factory packaging in case the device needs to be returned Use

the original factory packaging during transport as it provides optimum protection

for the product. . If it is necessary to return the product during the warranty

period, the manufacturer is not liable for damages caused by improper

packaging.

The compressor is shipped in a vertical position and must be secured using

transport straps.

Protect the compressor from humid and dirty environments and extreme temperatures

during transport and storage. Do not store near any volatile chemical substances.

If not, please dispose of the original packaging material in an environmentally-friendly

way. The packaging cardboard can be recycled with old paper.

5.1. Ambient conditions

Products may only be stored and transported in vehicles that are free of any traces of volatile

chemicals under the following climactic conditions:

Temperature

–25°C to +55°C

Relative humidity

max. 90% (non-condensing)

Storing or shipping the equipment in any conditions other than those specified below is

prohibited.

PRODUCT DESCRIPTION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 10 11/2023

PRODUCT DESCRIPTION

6. VARIANTS

The compressor is manufactured according to its intended application in the following variants:

DK50 2V/50/M

Compressor with adsorption dryer

DK50 2V/50S/M

Compressor in cabinet with adsorption dryer

Cabinet S50

It decreases noise level of the compressor

DK50 2x2V/110/M

Compressor with adsorption dryer

DK50 2x2V/110S/M

Compressor in cabinet with adsorption dryer

Cabinet S110

It decreases noise level of the compressor

DK50 2V/50/M

S50

DK50 2V/50S/M

DK50 2x2V/110/M

S110

DK50 2x2V/110S/M

PRODUCT DESCRIPTION

11/2023 11 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

7. ACCESSORIES

Accessories that are not included in the standard order must be ordered separately.

Set of compressed air outlet filters

The compressor may be equipped with a set of filters if specified. The filter set may be equipped

with an air pressure regulator.

Where a different level of air filtration is required, this requirement must be

agreed upon with the supplier and specified in the order.

Type

Use

Level of filtration (µm)

Article number

FS 30F

DK50 2V/50/M

DK50 2x2V/110/M

1

604014119-014

FS 30M

1+0.1

604014119-015

FS 30S

1+0.01

604014119-017

FS 30A

1 + 0.01 + A**

604014119-018*

*) submicrofilter with activated carbon

*) - set FS 30A, in the standard configuration, this cannot be combined with a pressure regulator

on products DK50 2V/50/M; please contact your supplier if you are interested in such set (with a

regulator)

Filter set regulator assembly

The compressor may be equipped with a pressure regulator of the compressed air outlet if

specified. The regulator must be selected according to the application to the filter set, or

separately The regulator shall ensure constant pressure at the outlet.

Type

Use

Article number

Regulator complete

(to the filter assembly)

DK50 2V/50/M

DK50 2x2V/110/M

604014130-000

REG12 (separate)

DK50 2V/50/M

447000001-088

REG13 (separate)

DK50 2x2V/110/M

447000001-096

Filter set brackets

A suitable bracket must be ordered for every filter set.

3KOM modules for controlling multiple compressors in Master-Slave functionality

A 3KOM control module may be ordered to manage the operation of 2 or 3 identical compressors

with the same pressure range in Master-Slave functionality. In use, the controller in the module

takes over the compressor switching function. The control module may be ordered in the

configurations shown in the following table.

Type

Use

Article number

Compressor-mounted bracket

DK50 2V/50/M

603014177-000

DK50 2x2V/110/M

604014169-000

DK50 2x2V/110/M

to order

PRODUCT DESCRIPTION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 12 11/2023

Compressor model

Control schematic

Article number

System air outlet

DK50 2V/50/M

DK50 2x2V/110/M

1+1

1+1+1

603002152-000

G 3/4“

Equipotential bonding socket

The socket provides protective bonding.

Type

Use

Name

Article number

POAG-KBT6-EC

DK50 2V/50S/

DK50 2x2V/110S/M

Mains plug

connector

033400075-000

FLEXI-S/POAG-HK6

Conductor (1 m)

034110083-000

8. PRODUCT FUNCTION

8.1. Compressor with adsorption dryer

(Fig. 1, Fig. 2) The air pump (1) draws in air through the inlet filter (8) and supplies compressed air

through the connecting hose into the adsorption dryer (13). From the inlet to the dryer module, the

air is first cooled in the integrated cooler (30) and then moves through the condensate separator

(37), entering the active chamber with adsorbent (32), where the air is dried. A portion of the air is

fed into the second, regenerated chamber, where this air is used to remove moisture from the

adsorbent, after which it is vented to the atmosphere. The active chamber switches on a cyclical

basis. The dry air then passes through the non-return valve (3) into the air tank (2). Air drying

efficiency (the pressure dew point) is determined by the dew point sensor (15) located in the air

tank.

8.2. Compressor cabinet

(Fig. 4) The soundproof cabinet provides compact covering of the compressor, dampens noise

efficiently, providing sufficient exchange of cooling air. The fan (9) under the compressor pump

provides cooling of the compressor. It is in operation at the same time with the compressor motor

or after switching on the temperature switch at temperature above 40°C. After cooling the cabinet

area approximately under 32°C, the fan turns off automatically. The dryer display (25) is located

on the front panel of the cabinet.

Risk of compressor overheating.

Make sure that there are no obstacles at the cooling air inlet into the cabinet

(around the bottom part of the cabinet) and at the hot air outlet on the top back

side of the cabinet.

If the compressor is placed on a soft floor, e.g. carpet, create space between

the base and the floor or the cabinet and the floor, e.g. underlay the footings

with hard pads to ensure sufficient cooling of the compressor.

PRODUCT DESCRIPTION

11/2023 13 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

Descriptions for figures 1 - 3

1 Air pump

2 Air tank

3 Non-return valve

4 Pressure switch

5 Safety valve

6 Pressure gauge

7 Drain valve

8 Inlet filter

9 Compressor fan

10 Casters

11 Hour counter

12 Electrical box

13 AD dryer

14 Air outlet

15 Pressure dew point sensor

16 Condensate collection vessel

17 Supporting bracket

18 Cabinet fan

19 Cabinet pressure gauge

20 Switch

21 Cabinet connector

22 Pressure gauge hose

23 Wall stop

24 Pulling system

25 Cabinet display

26 Handle

27 Cabinet gas springs

28 *Dryer display

29 Outlet module

30 Cooling module

31 Electrical panel

32 Dryer chamber

33 Inlet valve module

34 Compressed air inlet

35 Regeneration solenoid valve

36 Dryer fan

37 Condensate separator

38 Condensate drain solenoid valve

39 Air outlet

40 **Bushing

41 Outlet from condensate separator and

regeneration valves

42 Power cord

* Position (28) applies to the DK50 2V/50/M, DK50 2x2V/110/M model without the cabinet;

position (28) in the case of the DK50 2V/50 S/M, DK50 2x2V/110 S/M with the cabinet is a simple

cover.

** For the cabinet model, the cable connected to the display (25) in the front panel of the

cabinet is routed through the universal bushing (40).

PRODUCT DESCRIPTION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 14 11/2023

Fig. 1: DK50 2V/50/M – Compressor with adsorption dryer

PRODUCT DESCRIPTION

11/2023 15 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

Fig. 2: DK50 2x2V/110/M – Compressor with adsorption dryer

PRODUCT DESCRIPTION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 16 11/2023

Fig. 3:Adsorption dryer

ADM 140/50

ADM 280/110

* Position (28) applies to the DK50 2V/50/M, DK50 2x2V/110/M model without the cabinet; position

(28) in the case of the DK50 2V/50 S/M, DK50 2x2V/110 S/M with the cabinet is a simple cover.

** For the cabinet model, the cable connected to the display (25) in the front panel of the cabinet is

routed through the universal bushing (40).

PRODUCT DESCRIPTION

11/2023 17 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

Fig. 4: Cabinet

A - DK50 2V/50S/M

PRODUCT DESCRIPTION

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 18 11/2023

B - DK50 2x2V/110S/M

TECHNICAL DATA

11/2023 19 NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023

TECHNICAL DATA

Compressors are designed for operation in dry, ventilated and dust-free indoor rooms under the

following climactic conditions:

Temperature

+5°C to +40°C

Relative humidity

max. 70%

Working pressure 6 – 8 bar

DK50 2V/50/M

DK50 2V/50S/M

Rated voltage

Frequency a)

V, Hz

230, 50

3x400, 50

230, 50

3x400, 50

Capacity at 6 bar (FAD) -20°C

l/min

120

Working pressure b)

bar

6.0 – 8.0

Rated current

A

8.8

3.9

9.0

4.1

Motor power

kW

1.2

Air tank volume

l

50

Air quality - filtration

m

-

Maximum operating pressure of safety

valve

bar

9.0

Noise level at 5 bar (LpA)

dB

≤70.5

≤52.0

Operating mode

%

S1-100

PDP drying performance at 7 bar d)

°C

 -20

Dryer low pressure warning

bar

< 3

Dryer high pressure warning

bar

˃ 9

Dryer high dew point warning

°C

˃ -20

Time to fill air tank from 0 to 7 bar

s

185

Dimensions (net)

w x d x h

mm

580x600x805

750x715x1015

Net weight c)

kg

74

72

125

123

a)Specify the compressor version when ordering

b)Consult any other range of pressure with the supplier

c)Weight is indicative and only applies to the product without accessories

d)Applies to ambient temperatures of <30°C PDP – pressure dew point

TECHNICAL DATA

NP-DK50 2V 50, 2x2V 110-AD-A-8_11-2023 20 11/2023

Dependence of compressor output on working pressure

Stránka sa načítava...

EKOM DK50 2V/50 Používateľská príručka

Tento návod je vhodný aj pre

EKOM DK50 2V/50 Používateľská príručka

v iných jazykoch

Súvisiace články