Silvercrest SND 3600 A1 Operating Instructions Manual

Slide & Negative Scanner SND 3600 A1

4

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: SND 3600 A1-12/10-V3

IAN: 55973

Slide & Negative

Scanner

Operating instructions

Cyfrowy skaner do

negatywów

Instrukcja obsługi

Přístroj na digitalizo-

vání negativů

Návod k obsluze

Filmszkenner

Használati utasítás

Digitalizator negativov

Navodila za uporabo

Digitalizér negatívov

Návod na obsluhu

CV_55973_SND3600A1_LB4.indd 1-4CV_55973_SND3600A1_LB4.indd 1-4 21.01.2011 11:36:32 Uhr21.01.2011 11:36:32 Uhr

SND 3600 A1

12

3

4

5

6

7

2 x

CV_55973_SND3600A1_LB4.indd 5-8CV_55973_SND3600A1_LB4.indd 5-8 21.01.2011 11:36:33 Uhr21.01.2011 11:36:33 Uhr

1

SND 3600 A1

GB

Index

Introduction . . . . . . . . .2

Information for these

operating instructions . . . . . 2

Copyright . . . . . . . . . . . . . . 2

Limited liability . . . . . . . . . . 2

Warnings . . . . . . . . . . . . . . 3

Proper use . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . .4

Basic Safety Instructions . . . 4

Setting up and

connecting . . . . . . . . . .6

Safety instructions . . . . . . . . 6

Package contents and

transport inspection . . . . . . 6

Disposal of the packaging . 7

Requirements for the set-up

location . . . . . . . . . . . . . . . 7

Connecting to a computer . 8

Operating

components . . . . . . . .14

Handling and

operation . . . . . . . . . .14

Inserting ﬁ lm strips . . . . . . 14

Inserting slides . . . . . . . . . 14

Starting the ArcSoft

MediaImpression 2

programme . . . . . . . . . . . 15

ArcSoft MediaImpression 2

programme . . . . . . . . . . . . 15

Scanning with the ArcSoft

MediaImpression 2

programme . . . . . . . . . . . 16

After Use . . . . . . . . . . . . . 19

Cleaning . . . . . . . . . .20

Safety instructions . . . . . . . 20

Cleaning . . . . . . . . . . . . . . 20

Troubleshooting . . . .21

Safety instructions . . . . . . . 21

Malfunction causes and

remedies . . . . . . . . . . . . . . 21

Storage/Disposal . . .22

Storage . . . . . . . . . . . . . . . 22

Disposal of the device . . . 22

Appendix . . . . . . . . . .23

Technical data . . . . . . . . . 23

Note regarding the

conformity declaration . . . 24

Warranty . . . . . . . . . . . . . 24

Service . . . . . . . . . . . . . . . 25

Importer . . . . . . . . . . . . . . 25

Introduction

GB

2

SND 3600 A1

Introduction

Information for these operating instructions

These operating instructions are a component of the Slide & Negative

Scanner SND 3600 A1 (henceforth designated as the device) and

supplies you with important information for intended use, safety and

connection as well as operation of the device.

The operating instructions must be constantly kept available close to

the device. They are to be read and used by anyone assigned to the

operation and repairing of the device. Keep these operating instruc-

tions and hand them over with the device to any future owners.

Copyright

This documentation is copyright protected.

Any copying and/or printing, including partial copying/printing,

as well as reproductions of the diagrams, even in an altered state is

only allowed with written permission from the manufacturer.

Limited liability

All technical information, data and information for connection and

operation, contained in these operating instructions correspond to

the latest at the time of printing and, to the best of our knowledge,

take into account our previous experience and know-how.

No claims can be derived from the details, illustrations and descriptions

in these instructions.

The manufacturer assumes no responsibility for damage caused

by failure to observe the instructions, improper use, inappropriate

repairs, making unauthorized changes or for using unapproved

replacement parts.

Introduction

3

SND 3600 A1

GB

Warnings

In the current operation instructions the following warnings are used:

WARNING

A warning of this danger level signiﬁ es a possible

dangerous situation.

If the dangerous situation is not avoided it can lead to injuries.

The directives in this warning are there to avoid personal ►

injuries.

IMPORTANT

A warning of this danger level signiﬁ es possible

pr

operty damage.

If the situation is not avoided it can lead to property damage.

The directives in this warning are there to avoid property ►

damage.

NOTICE

A notice signiﬁ es additional information that assists in the ►

handling of the device.

Proper use

This device is intended exclusively for the non-commercial use of

scanning and digitizing ﬁ lm negatives and slides.

This device is not intended for any other use or for uses beyond those

mentioned.

Safety

GB

4

SND 3600 A1

WARNING

Danger from unintended use!

Danger can come from the device if used for unintended purposes

and/or other types of use.

Use the device exclusively for intended purposes. ►

Observe the procedures described in these operating instructions. ►

Claims of any kind for damage resulting from unintended use will not

be excepted.

The operator alone bears liability.

Safety

In this chapter you receive important safety information regarding

handling of the device.

This device complies with the statutory safety regulations. Improper

use can lead to personal injury and property damage.

Basic Safety Instructions

For safe handling of the device observe the following safety information:

Before use check the device for visible external damage. Do not ■

put into operation a device that is damaged or has been dropped.

Damaged cables or connections should be replaced b

y authorized ■

qualiﬁ ed persons or by the customer service department.

Safety

5

SND 3600 A1

GB

Persons who, due to their physical, intellectual or motor abilities, ■

are incapable of operating the device safely may only use the

device under super

vision or direction from a responsible person.

Only permit children to use the device under supervision. ■

Repairs should only be carried out by authorized specialist com- ■

panies or by the customer service department. Incorrect repairs

can r

esult in signiﬁ

cant dangers for the user. In addition warranty

claims become void.

A repair to the device during the warranty period may only be ■

carried out by a customer service department authorized by the

manufacturer other

wise no additional warranty claims can be

considered for subsequent damages.

Defective components may only be replaced with original ■

replacement parts. Only by using original replacement parts can

you guar

antee that the safety requirements are complied with.

Do not carry out any unauthorised reconstructions or alterations ■

to the device.

Protect the de

vice from moisture and liquid penetration. ■

Do not operate the device in the vicinity of open ﬂ ames. ■

Setting up and connecting

GB

6

SND 3600 A1

Setting up and connecting

Safety instructions

WARNING

Personal injury and property damage can occur

during initial operation of the device!

Observe the following safety information to avoid danger:

Packaging material should not be used as a play thing. ►

There is a risk of suﬀ ocation!

Package contents and transport inspection

The device is delivered with the following components as standard:

Scanner ▯

2 x Slide holder ▯

2 x Negative holder ▯

Programme CD ▯

Cleaning brush ▯

Operating instructions ▯

NOTICE

Check the contents to make sure everything is there and for ►

visible damage.

If the contents are not complete or ar

e damaged due to ►

defective packaging or through transportation contact the

service hotline (see the section “Service”).

Setting up and connecting

7

SND 3600 A1

GB

Disposal of the packaging

The packaging protects the device from transport damage. The packag-

ing materials are selected from the point of view of their environmental

friendliness and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit

saves on raw material and reduces generated waste.

Dispose of packaging material that is no longer needed

according to the regionally established regulations.

NOTICE

If possible preserve the device's original packaging during ►

the warranty period so that in the case of a warranty claim

you can pack

age the device properly for return.

Requirements for the set-up location

For safe and faultless operation of the device the set-up location must

fulﬁ ll the following provisions:

The device must be placed on a ﬁ rm, ﬂ at and level surface. ■

Do not place the device in a hot, wet or very damp environment ■

or in the vicinity of ﬂ ammable materials.

Place the de

vice so that it is not subjected to dir

ect sunlight. ■

Setting up and connecting

GB

8

SND 3600 A1

Connecting to a computer

System prerequisites

You will need a computer with a vacant USB port and with the ♦

operating system Windows

®

XP, Windo

ws

®

Vista or Windows

®

7 from the Microsoft

®

corporation.

Installation of the ArcSoft MediaImpression 2 programme

NOTICE

In these operating instructions only the programme sections ►

are described that you will need for scanning your slides

and/or ﬁ

lm negatives. You can ﬁ nd further information in the

programme's on-line help.

The illustrations and descriptions refer to the operating ►

system Microsoft

®

Windows

®

7. The illustration depictions

can diﬀ er, depending on the display settings, with other

operating systems.

Insert the supplied programme CD into your computer’s CD drive. ♦

The window “Automatic playback” will be displayed.

Click on the button “run autorun.exe”. ♦

The installation begins and the start window is displayed.

Setting up and connecting

9

SND 3600 A1

GB

NOTICE

If you have switched oﬀ the autostart function and the installa- ►

tion process does not begin automatically you can star

t the

installation process by double clicking on the ﬁ le "autorun.exe"

in the CD's main directory.

Click on the button “Arcsoft Software” to install the “ArcSoft ♦

MediaImpression 2“ programme.

The installation wizard will be conﬁ gured.

Setting up and connecting

GB

10

SND 3600 A1

The start window of the installation wizard will be displayed.

Click on the button “Continue ♦

>”.

The window “License agreement” will be displayed.

Click on the button “Yes”. ♦

Setting up and connecting

11

SND 3600 A1

GB

The window for the selection of the installation directory will be

displayed.

Select the desired installation directory and click on the button ♦

“Continue

>”.

The window for the selection of the programme folders (Entry in

the Windows start menu) will be displayed.

Select the desired programme folder and click on the button ♦

“Continue

>”.

Setting up and connecting

GB

12

SND 3600 A1

The programme will be installed and the installation progress

will be displayed.

The window “Associated ﬁ le formats” will be displayed.

Select the ﬁ le format that is to be associated with the programme ♦

and click on the button “Continue >”.

Setting up and connecting

13

SND 3600 A1

GB

The display will show that the installation has been completed.

Click on the button “Finish”. ♦

The start window will be displayed again.

Click on the button “Exit Installation” to exit the installation ♦

programme.

Connection

Connect the USB cable ♦

4

to a USB port on your computer.

Operating components/Handling …

GB

14

SND 3600 A1

Operating components

LED PWR

2

SCAN button.

3

Slot for ﬁ lm and/or slide holders.

4

USB connection cable.

5

Film holder.

6

Slide holder.

7

Cleaning brush

Handling and operation

In this chapter you receive important information for the handling

and operation of the device.

Inserting ﬁ lm strips

Release the fastener on the front of the ﬁ lm holder ♦

5

and open

the holder.

Insert the ﬁ lm strip into the holder correctly orientated. ♦

Close the holder making sure that the cover locks into place. ♦

Inserting slides

Release the fastener on the front of the slide holder ♦

6

and

open the holder.

Insert a maximum of 3 framed slides, correctly orientated, into ♦

the holder.

Close the holder making sure that the co

ver locks into place. ♦

Handling and operation

15

SND 3600 A1

GB

Starting the ArcSoft MediaImpression 2 programme

Start the ArcSoft MediaImpression 2 programme by double ♦

clicking on the programme icon on the desktop or select the

corresponding input from the start menu.

ArcSoft MediaImpression 2 programme

There are four options available:

1. Image: Open an available image on the computer or memory

medium.

2. Capture: For the scanning of new images

3. Simple reproduction: Fast image editing

4. Image editing tools: Detailed image editing

NOTICE

In these operating instructions only the programme sections ►

are described that you will need for scanning your slides

and/or ﬁ

lm negatives. You can ﬁ nd further information in

the programme's online help.

1

2

3

4

Handling and operation

GB

16

SND 3600 A1

Scanning with the ArcSoft MediaImpression 2 programme

Connect the device. The LED ♦ PWR lights up.

Start the ArcSoft MediaImpression 2 programme. ♦

Click on the button “Capture”. ♦

When the programme is ﬁ rst started after the installation a cali-

br

ation and data collection pr

ocess takes place. Make sure that

no slide or negative holders are inserted into the device.

In the displayed information window click on the button “OK” ♦

to start calibration and data collection. The ﬁ rst calibration and

data collection process can take several minutes.

The calibration progress will be displayed.

After completion of the calibration the programme window will

be displayed.

Handling and operation

17

SND 3600 A1

GB

The window “Capture from scanner” will be displayed.

Carry out the necessary settings: ♦

File format, quality (only with JPG ﬁ les), memory location, ﬁ lm

type, colour depth, scan resolution

NOTICE

The colour depth is deﬁ ned as 24 Bit. A scan with 1600 DPI ►

has a resolution of 2520 x 1680 Pixel and a scan with

3600 DPI has a resolution of 5040 x 3360 Pix

el.

Click on the button “Capture”. ♦

The “Capture” window is displayed.

Handling and operation

GB

18

SND 3600 A1

Slide the holder with the negatives and/or slides to be scanned ♦

into the slot

3

on the device until it locks into place.

The scan motif will be displayed in the preview ﬁ eld .

NOTICE

A holder that has been inserted into the device cannot be pulled ►

out again, it has to be pushed completely through the device.

Adjust the holder, if r

equired, until the scan motif is displayed ♦

optimally in the preview window.

If necessary

, you can set the electrical balance (Balance), the ♦

exposure (Exposure), the brightness (Brightness), the contrast

(Contrast) and the satur

ation (Saturation) by pressing on the

button “Adjust”.

A settings window will be opened.

Click on ♦ to increase the corresponding value and on to

decrease the corresponding value.

Use the slide controller to adjust the electrical balance (Colour

balance).

Click on the “OK” button to accept the setting and return to the ♦

“Capture” window.

Stránka sa načítava...

Silvercrest SND 3600 A1 Operating Instructions Manual

Silvercrest SND 3600 A1 Operating Instructions Manual

v iných jazykoch

Súvisiace články

Ostatné dokumenty