Panasonic SCPTX60 Návod na obsluhu

[EG]

RQTX1002-Z

Operating Instructions

Návod k obsluze

Instrukcja obsługi

DVD Home Theater Sound System

Systém zvuku domácího kina s DVD pâehrávaçem

Zestaw kina domowego z odtwarzaczem DVD

Model No./Model č./Nr Modelu SC-PTX60

until

2009/06/25

Dear customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read

the instructions completely.

Please keep this manual for future reference.

Vážený zákazníku

Děkujeme za zakoupení tohoto výrobku. Pro dosažení optimálního

výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Před zapojením, obsluhou nebo nastavením tohoto výrobku si

přečtěte celý tento návod.

Návod uschovejte k pozdějšímu použití.

Szanowny Nabywco

Dziękujemy za zakupienie tego produktu. Aby zapewnić optymalną pracę

urządzenia i jego bezpieczną obsługę, należy dokładnie przeczytać

niniejszą instrukcję.

Przed podłączeniem, użytkowaniem lub regulacją produktu należy

przeczytać całą instrukcję obsługi.

Należy zachować tę instrukcję obsługi na przyszłość.

The illustrations shown may differ from your unit.

Uvedené ilustrace se mohou od vašeho přístroje lišit.

Urzdązenie pokazane na ilustracjach może się różnić od

zakupionego urządzenia.

Region number/Číslo regionu/Numer regionu

The player plays DVD-Video marked with labels containing

the region number “2” or “ALL”.

Přehrávač přehrává disky DVD-Video označené štítky s

číslem regionu „

2“ nebo „ALL“.

Odtwarzacz obsługuje płyty DVD-Video z numerami regionów

„2“ lub „ALL“.

Example/Příklad/Przykład:

2 ALL

3

5

2

SC-PTX60EG_eng.book Page 1 Tuesday, May 26, 2009 1:38 PM

2

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Accessories

Please check and identify the supplied accessories.

Operations in these instructions are described mainly with the

remote control, but you can perform the operations on the main

unit if the controls are the same.

System SC-PTX60

Main unit SA-PTX60

Front speakers SB-HFX60

Subwoofer SB-HWX60

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND

SIMILAR ITEMS.

≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please

increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily

accessible.

The mains plug of the power supply cord shall remain readily

operable.

To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from AC receptacle.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

(Back of product)

(Inside of product)

(Tuotteen sisällä)

(Produktets innside)

∏ 1 Remote control

(N2QAYB000361)

∏ 2 Remote control batteries

∏ 1 FM indoor antenna

∏ 1 Video cable

∏ 2 Speaker cables

∏ 1 AC mains lead

2

SC-PTX60EG_eng.book Page 2 Tuesday, May 26, 2009 1:38 PM

3

Getting StartedPlaying DiscsOther OperationsReference

RQTX1002

ENGLISH

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Quick Start Guide

step 1 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

step 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Speaker connections. . . . . . . . . . . . . . . . . . . . . .7

Radio antenna connections. . . . . . . . . . . . . . . . .7

Audio and video connections . . . . . . . . . . . . . . .8

step 3 AC mains lead connection. . . . . . . . . . . . . . . 9

step 4 Preparing the remote control . . . . . . . . . . . . 9

step 5 EASY SETUP. . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting up the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 11

Confirming the preset channels. . . . . . . . . . . . . . . . . . . . . 11

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

RDS broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Selecting the playback source . . . . . . . . . . . . . . . . . . . . 12

Selecting the source from the START menu . . . . . . . . . . . 12

Selecting the source by the remote control . . . . . . . . . . . . 12

Playing Discs

Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Using the main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Other modes of play. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Program and Random play. . . . . . . . . . . . . . . . . . . . . . . . . 16

Using navigation menus . . . . . . . . . . . . . . . . . . . . . . . . . 17

Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Playing RAM and DVD-R/-RW (DVD-VR) discs . . . . . . . . 17

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 18

Other Operations

Using the VIERA Link “HDAVI Control

TM

” . . . . . . . . . . .20

One touch play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Auto input switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Speaker control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

VIERA Link Control only with TV’s remote control

(for “HDAVI Control 2 or later”) . . . . . . . . . . . . . . . . . . . . 21

Operating other devices . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Playing from a USB device . . . . . . . . . . . . . . . . . . . . . . . . 23

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . .24

DivX information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . . 26

Speaker installation option . . . . . . . . . . . . . . . . . . . . . . .27

Discs that can be played . . . . . . . . . . . . . . . . . . . . . . . . .28

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . 34

Enjoying various sound effects

Enjoying surround sound effects . . . . . . . . . . . . . . 13

Selecting sound mode . . . . . . . . . . . . . . . . . . . . . . . 13

Whisper-mode Surround . . . . . . . . . . . . . . . . . . . . . 13

3

SC-PTX60EG_eng.book Page 3 Tuesday, May 26, 2009 1:38 PM

4

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

4

Safety precautions

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These conditions

can damage the cabinet and other components, thereby shortening the

unit’s service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the unit and

cause a fire.

Do not use a DC power source. Check the source carefully when setting

the unit up on a ship or other places where DC is used.

Ensure the AC mains lead is connected correctly and not damaged. Poor

connection and lead damage can cause fire or electric shock. Do not pull,

bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains

lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

Do not let metal objects fall inside the unit. This can cause electric shock

or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable

gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is not

covered in these instructions occurs, disconnect the AC mains lead and

contact your dealer or an authorized service center. Electric shock or

damage to the unit can occur if the unit is repaired, disassembled or

reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it

is not to be used for a long time.

Placement

Voltage

AC mains lead protection

Foreign matter

Service

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling

of old products and used batteries, please

take them to applicable collection points, in

accordance with your national legislation and

the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries

correctly, you will help to save valuable

resources and prevent any potential negative

effects on human health and the environment

which could otherwise arise from

inappropriate waste handling.

For more information about collection and

recycling of old products and batteries, please

contact your local municipality, your waste

disposal service or the point of sale where

you purchased the items.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

For business users in the European

Union

If you wish to discard electrical and electronic

equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other

Countries outside the European Union]

These symbols are only valid in the European

Union. If you wish to discard these items,

please contact your local authorities or dealer

and ask for the correct method of disposal.

Note for the battery symbol (bottom

two symbol examples):

This symbol might be used in combination with

a chemical symbol. In this case it complies with

the requirement set by the Directive for the

chemical involved.

Cd

SC-PTX60EG_eng.book Page 4 Tuesday, May 26, 2009 1:38 PM

5

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Glossary

Decoder

A decoder restores the coded audio signals on DVDs to normal. This is

called decoding.

DivX

DivX is a popular media technology created by DivX, Inc. DivX media

files contain highly compressed video with high visual quality that

maintains a relatively small file size.

Dolby Digital

This is a method of coding digital signals developed by Dolby

Laboratories. Apart from stereo (2-channel) audio, these signals can also

be 5.1-channel sound.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the world.

There is good separation between the channels, so realistic sound

effects are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound that

can be heard above the noise of the equipment and the highest level of

sound before distortion occurs.

Film and video

DVD-Videos are recorded using either film or video. This unit can

determine which type has been used, then uses the most suitable

method of progressive output.

Film: Recorded at 25 frames per second (PAL discs) or 24 frames per

second (NTSC discs). (NTSC discs recorded at 30 frames per

second as well).

Generally appropriate for motion picture films.

Video: Recorded at 25 frames/50 fields per second (PAL discs) or

30 frames/60 fields per second (NTSC discs). Generally

appropriate for TV drama programs or animation.

Frame still and field still

Frames are the still pictures that go together to make a moving picture.

There are about 30 frames shown each second.

One frame is made up of two fields. A regular TV shows these fields one

after the other to create frames.

A still is shown when you pause a moving picture. A frame still is made

up of two alternating fields, so the picture may appear blurred, but overall

quality is high.

A field still is not blurred, but it has only half the information of a frame still

so picture quality is lower.

HDMI (High-Definition Multimedia Interface)

HDMI is a next-generation digital interface for consumer electronic

products. Unlike conventional connections, it transmits uncompressed

digital video and audio signals on a single cable. This unit supports high-

definition video output (720p, 1080i, 1080p) from the HDMI AV OUT

terminal. To enjoy high-definition video, a high-definition compatible TV is

required.

I/P/B

MPEG 2, the video compression standard adopted for use with

DVD-Video, codes frames using these 3 picture types.

I: Intra coded picture

This picture has the best quality and is the best to use when adjusting

the picture.

P: Predictive coded picture

This picture is calculated based on past I- or P-pictures.

B: Bidirectionally-predictive coded picture

This picture is calculated by comparing past and future I- and

P-pictures so it has the lowest volume of information.

JPEG (Joint Photographic Experts Group)

This is a system used for compressing/decoding colour still pictures. The

benefit of JPEG is less deterioration in picture quality considering the

degree of compression.

Linear PCM (Pulse Code Modulation)

These are uncompressed digital signals, similar to those found on CDs.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to approximately

one tenth of its size without any considerable loss of audio quality.

MPEG4

A compression system for use on mobile devices or a network, that

allows highly efficient recording at a low bit rate.

Playback Control (PBC)

If a Video CD has playback control, you can select scenes and

information with menus.

Progressive/Interlaced

The PAL video signal standard has 576 interlaced (i) scan lines, whereas

progressive scanning, called 576p, uses twice the number of scan lines.

For the NTSC standard, these are called 480i and 480p respectively.

Using progressive output, you can enjoy the high-resolution video

recorded on media such as DVD-Video.

Your TV must be compatible to enjoy progressive video.

Sampling frequency

Sampling is the process of converting the heights of sound wave (analog

signal) samples taken at set periods into digits (digital encoding).

Sampling frequency is the number of samples taken per second, so

larger numbers mean more faithful reproduction of the original sound.

WMA

WMA is a compression format developed by Microsoft Corporation. It

achieves the same sound quality as MP3 with a file size that is smaller

than that of MP3.

5

SC-PTX60EG_eng.book Page 5 Tuesday, May 26, 2009 1:38 PM

6

RQTX1002

Quick Start Guide

Getting Started

ENGLISH

Using just the supplied speakers and the subwoofer, and by reproducing acoustic effects very similar to 5.1ch surround, you can enjoy a true “home

theatre” experience even within a limited space.

How you set up your speakers can affect the bass and the sound field.

Note the following points:

≥ Place speakers on flat secure bases.

≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 27.

[Note]

Keep your speakers at least 10 mm away from the system for proper ventilation.

Setup example

Notes on speaker use

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be

negatively affected.

≥ These speakers do not have magnetic shielding. Do not place them

near TVs, personal computers or other devices easily influenced by

magnetism.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound.

– When the speakers are reverberating due to a record player, noise

from FM broadcasts, or continuous signals from an oscillator, test

disc, or electronic instrument.

– When adjusting the sound quality.

– When turning the unit on or off.

Caution

The front speakers have a speaker vent near the top for the speaker.

≥ Be sure not to put or drop any items inside the vent.

– Doing so may cause irregular sounds and damage to the speaker.

Do not touch the front netted area of the speakers. Hold by the sides.

≥ Be sure not to hold the speaker from the vent.

– Doing so may damage the speakers and cause injuries.

≥ Be cautious when children are near.

e.g.

step 1 Positioning

60º

To allow for proper ventilation and to maintain

good airflow around the main unit, position it with

at least 5 cm of space on all sides.

Place to the right or left

of the TV, on the floor or

a sturdy shelf so that it

will not cause vibration.

Leave about 30 cm

from the TV.

Main unit

Front speakers

Subwoofer

Place the front speakers at

approximately the same distance

from the seating position.

Caution

≥ The main unit and supplied speakers are to be used only as

indicated in this setup. Failure to do so may lead to damage to

the amplifier and/or the speakers, and may result in the risk of

fire. Consult a qualified service person if damage has occurred

or if you experience a sudden change in performance.

≥ Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

DO

NOT

DO

6

SC-PTX60EG_eng.book Page 6 Tuesday, May 26, 2009 1:38 PM

7

RQTX1002

Getting Started

Quick Start Guide

ENGLISH

Turn off all equipment before connection and read the appropriate operating instructions.

Do not connect the AC mains lead until all other connections are completed.

Setup example

Connect to the terminals of the same colour.

(Continued on next page)

step 2 Connections

1

Speaker connections

Main unit

FM

ANT

75Ω

2

1

Main unit

Front speaker (R)

Push!

: White

: Blue line

PURPLE

SUBWOOFER

RED

FRONT

(R)

WHITE

FRONT

(L)

Insert the wire fully,

taking care not to

insert beyond the

wire insulation.

Be careful not to cross

(short-circuit) or reverse

the polarity of the

speaker wires as

doing so may

damage the speakers.

DO NOT

2

Radio antenna connections

Using an indoor antenna

Main unit

FM

ANT

75 Ω

Adhesive tape

FM indoor antenna

(included)

Affix this end of the antenna

where reception is best.

Using an outdoor antenna (optional)

Main unit

FM outdoor antenna

[Using a TV antenna

(not included)]

The antenna should be

installed by a competent

technician.

75  coaxial cable

(not included)

FM

ANT

75 Ω

Use outdoor antenna if FM radio reception is poor.

≥ Disconnect the antenna when the unit is not in use.

≥ Do not use the outdoor antenna during an electrical storm.

7

SC-PTX60EG_eng.book Page 7 Tuesday, May 26, 2009 1:38 PM

8

RQTX1002

Quick Start Guide

Getting Started

ENGLISH

Basic setup example

[Note]

If the TV does not have a VIDEO IN terminal, connect using a Scart adapter (Scart—VIDEO IN).

[Note]

≥ Do not make the video connections through the VCR.

Due to copy guard protection, the picture may not be displayed properly.

≥ Only one video connection is required. Choose one of the video connections above depending on your TV.

step 2 Connections (continued)

3

Audio and video connections

L

R

AUDIO OUT

VIDEO IN

AUX

AV

OUT

VIDEO OUT

OPTICAL IN

Main unit

Video cable (included)

Audio cable (not included)

AV2

AV OUT

Scart cable

(not included)

TV (not included)

Refer to the operating instructions for the TV, cable or satellite

STB, or VCR for the settings necessary to output its audio from

the AUDIO OUT terminal to your home theater system.

You can enjoy the audio from your TV, cable or satellite STB,

or your VCR through this home theater system by

connecting to the AUX terminal.

Select “AUX” as the source (B 12).

Set top box (STB) or VCR

(not included)

Other video connection

TV terminal

Cable required

(not included)

Main unit terminal Features

[Note]

If there is more than

one HDMI terminal,

refer to the operating

instructions for the TV

to determine which

terminal to connect to.

[Note]

≥ Non-HDMI-compliant cables

cannot be utilized.

≥ Please use High Speed HDMI

Cables that have the HDMI logo

(as shown on the cover). It is

recommended that you use

Panasonic’s HDMI cable.

Recommended part number:

RP-CDHG15 (1.5 m),

RP-CDHG30 (3.0 m),

RP-CDHG50 (5.0 m), etc.

[\\\\\\\\\\\HDMI\\\\\\\\\\\] This connection provides the best picture quality.

≥ Set “VIDEO PRIORITY” to “ON” (B 25, HDMI menu).

≥ Set “VIDEO FORMAT” in Menu 4 (HDMI) (B 19).

VIERA Link “HDAVI Control”

If your Panasonic TV is VIERA Link compatible, you

can operate your TV synchronising with home theater

operations or vice versa (B 20, Using the VIERA Link

“HDAVI Control

TM

”).

≥ Make the extra audio connection by connecting to the

AUX terminal when you use

VIERA Link “

HDAVI

Control

”

function.

AV1

e.g.

VIDEO IN

Video cable

(included)

Scart adapter

(not included)

AV IN

HDMI cable

AV

OUT

8

SC-PTX60EG_eng.book Page 8 Tuesday, May 26, 2009 1:38 PM

9

RQTX1002

Getting Started

Quick Start Guide

ENGLISH

[Note]

If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV

output should then be connected to the AUX or OPTICAL IN terminal of the main unit.

Conserving power

The main unit consumes a small amount of power, even when it is in

standby mode (approx. 0.2 W). To save power when the unit is not to be

used for a long time, unplug it from the household mains socket.

You will need to reset some memory items after plugging in the main

unit.

[Note]

The included AC mains lead is for use with the main unit only.

Do not use it with other equipment. Also, do not use cords for other

equipment with the main unit.

Do not:

≥ mix old and new batteries.

≥ use different types of batteries at the same time.

≥ take apart or short-circuit.

≥ attempt to recharge alkaline or manganese batteries.

≥ use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a

long period of time. Store in a cool, dark place.

Aim at the remote control signal sensor (B 35), avoiding obstacles, at a

maximum range of approx. 7 m directly in front of the unit.

Other audio connection

TV or external

equipment

terminal

Cable required

(not included)

Main unit terminal Features

≥ Do not bend sharply when

connecting.

[\\\\\\OPTICAL\IN\\\\\\] This is the preferred connection for optimum sound and

surround sound.

This unit can decode the surround signals received

from your TV, cable or satellite STB. Refer to the

operating instructions for the TV, cable or satellite STB

for the settings necessary to output its audio from the

digital audio output to your home theater system. Only

Dolby Digital and PCM can be played with this

connection.

≥ After making this connection, make settings to suit the

type of audio from your digital equipment (B 12).

step 3 AC mains lead connection

OPTICAL OUT

Optical digital audio cable

OPTICAL IN

AC IN

To household

mains socket

AC mains lead (included)

Main unit

step 4 Preparing the remote control

Batteries

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

R6/LR6, AA

Insert so the poles ( and ) match those in the remote control.

Press in and lift up.

Replace the cover.

≥ Use alkaline or manganese batteries.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

Use

9

SC-PTX60EG_eng.book Page 9 Tuesday, May 26, 2009 1:38 PM

10

RQTX1002

Quick Start Guide

Getting Started

ENGLISH

The Easy setup screen assists you in making necessary

settings.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥TV audio

Select the audio input connection from your TV.

For AUX connection (B 8): Select “AUX”.

For OPTICAL IN connection (B 9): Select “DIGITAL IN”.

This will be the TV audio setting for VIERA Link “HDAVI Control”. (

B

20)

[Note]

≥ If this unit is connected to a “HDAVI Control 3 or later” compatible TV

via HDMI cable, the menu language and TV aspect information will be

retrieved via VIERA Link.

≥ If this unit is connected to a “HDAVI Control 2” compatible TV via

HDMI cable, the menu language information will be retrieved via

VIERA Link.

≥ Settings in the Easy setup can also be changed in the player settings

[e.g. language, TV aspect and TV audio (B 24)].

step 5 EASY SETUP

Preparation

Turn on your TV and select the appropriate

video input mode (e.g. VIDEO 1, AV 1, HDMI,

etc.) to suit the connections to this unit.

≥ To change your TV’s video input mode, refer

to its operating instructions.

≥ This remote control can perform some basic

TV operations (B 34).

1

Turn on the unit.

≥ When the Easy setup screen appears

automatically, skip step 2 to 6.

2

Select “DVD/CD”.

3

Show the setup menu.

4

Select “OTHERS”.

5

Select “EASY SETUP”.

6

Select “SET”.

7

Select “Yes”.

8

Follow the messages and

make the settings.

(B right, Easy setup settings)

9

Finish Easy setup.

DVD

OK

SETUP

OK

SETUP

DVD

-

CH SELECT

SETUP

SET

MAIN

DISC

VIDEO

AUDIO

DISPLAY

HDMI

OTHERS

EXIT : SETUP

RETURN

Menu

OK

Easy setup settings

10

SC-PTX60EG_eng.book Page 10 Tuesday, May 26, 2009 1:38 PM

11

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Setting up the radio

Up to 30 stations can be set.

≥ “SET OK” is displayed when the stations are set, and the radio tunes to

the last preset station.

≥ “ERROR” is displayed when automatic presetting is unsuccessful.

Preset the channels manually (B right).

≥ The FM setting is also shown on the TV display.

Press and hold the button again to cancel the mode.

≥ The mode is also cancelled when you change the frequency.

Up to 30 stations can be set.

A station previously stored is overwritten when another station is stored in

the same channel preset.

The unit can display the text data transmitted by the radio data system

(RDS) available in some areas.

If the station you are listening to is transmitting RDS signals, “RDS” will

light up on the display.

While listening to the radio broadcast

Press [FUNCTIONS] to display the text data.

Each time you press the button:

PS: Program service

PTY: Program type

FREQ: Frequency display

§

“M-O-R- M”=Middle of the road music

[Note]

RDS displays may not be available if reception is poor.

Presetting stations automatically

1

Select “FM”.

≥ Main unit:

Press [RADIO/EXT-IN].

2

Each time you press the button:

LOWEST (factory preset):

To begin auto preset with the lowest

frequency.

CURRENT:

To begin auto preset with the current

frequency.

§

To change the frequency, refer to “Manual

tuning” (B right).

3

(press and hold)

Release the button when

“FM AUTO” is displayed.

≥ Main unit:

Press and hold [1] (Play).

The tuner starts to preset all the stations it

can receive into the channels in ascending

order.

Confirming the preset channels

1

Select “FM”.

≥ Main unit:

Press [RADIO/EXT-IN].

2

Select the channel.

≥ To select a 2-digit number

e.g. 12: [S10] B [1] B [2]

Alternatively, press [X, W].

≥ Main unit:

Press [∫] (Stop) to select “PRESET” on

the display, and then press [:/6,

5/9] to select the channel.

When a stereo FM broadcast is being

received, “ST” lights in the display.

1 2 3

4 5 6

7 8

0

9

SEARCH SEARCH

OK

RADIO

F

U

N

C

T

I

O

N

S

10

MENU

EXT-IN

SKIP SKIP

,

SEARCH

Numbered

buttons

FUNCTIONS

RADIO

OK

PLAY MODE

MENU

,

PLAY MODE

EXT-IN

RADIO

MENU

PLAY

LIST

OK

EXT-IN

RADIO

1 2 3

4 5 6

7 8

0

9

10

ST

If noise is excessive

Press and hold [PLAY MODE]

[main unit: [∫] (Stop)] to display

“MONO”.

Manual tuning

1

Select “FM”.

≥ Main unit:

Press [RADIO/EXT-IN].

2

Select the frequency.

≥ Main unit:

Press [∫] (Stop) to select “MANUAL” on

the display, and then press [:/6,

5/9] to select the frequency.

≥ To start automatic tuning, press and hold

[6, 5 SEARCH] (main unit:

[:/6, 5/9]) until the frequency

starts scrolling. Tuning stops when a

station is found.

Presetting stations manually

1 While listening to the radio broadcast

Press [OK].

2 While the frequency is flashing on the display

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10] B [1] B [2]

Alternatively, press [X, W],

and then press [OK].

Main unit:

1 While listening to the radio broadcast

Press [1] (Play) twice.

2 While a channel number is flashing on the display

Press [:/6, 5/9], and then press [1] (Play) again.

RDS broadcasting

PTY displays

NEWS VARIED FINANCE COUNTRY

AFFAIRS POP M CHILDREN NATIONAL

INFO ROCK M SOCIAL A OLDIES

SPORT M-O-R- M

§

RELIGION FOLK M

EDUCATE LIGHT M PHONE IN DOCUMENT

DRAMA CLASSICS TRAVEL TEST

CULTURE OTHER M LEISURE ALARM

SCIENCE WEATHER JAZZ

MONO

EXT-IN

RADIO

SEARCH SEARCH

11

SC-PTX60EG_eng.book Page 11 Tuesday, May 26, 2009 1:38 PM

12

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Selecting the playback source

You can select sound effects, desired source, or access playback/menus

by using the START menu.

When “Input Selection” is selected

You can select a desired source from the menu.

≥ DVD/CD (B 10), FM (B 11), AUX

§

(B right), DIGITAL IN

§

(B right),

USB (B 23), iPod (B 22)

§

“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV

audio setting for VIERA Link “HDAVI Control” (B 20).

When “Sound” is selected

You can select sound quality settings (B 13, Equalizer).

When a disc is loaded or a USB device is connected, you can also access

playback or menus from the START menu.

e.g. [DVD-V]

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

You can operate the playback with the indicated controls.

Press [DVD], [iPod/USB], [RADIO/EXT-IN] on the main unit to select

source from the main unit. (B 35)

[Note]

Confirm the audio connection to the AUX or OPTICAL IN terminal on the

main unit when you select the corresponding sources (B 8, 9). Reduce

the volume on the TV to its minimum, and then adjust the volume of the

main unit.

Select to suit the type of audio from the OPTICAL IN terminal on the main

unit.

(When receiving true 5.1-channel surround sound, select “PCM OFF”.)

[Note]

≥ Audio that is input through the OPTICAL IN terminal is not output from

the HDMI terminal.

≥ Underlined items in the above paragraphs are factory settings.

Selecting the source from the START menu

1

Show the START menu.

This unit automatically turns on.

(The TV also turns on when using VIERA Link

“HDAVI Control”. This works only when in

“DVD/CD”, “USB” or “IPOD” mode without

any disc/device being loaded/connected.)

e.g.

2

Select an item.

≥ To exit, press [START].

3

Make the setting.

OK

DVD

iPod

USB

EXT-IN

RADIO

S

T

A

R

T

SETUP

DVD

USB, iPod

SETUP

START

RADIO, EXT-IN

OK

S

T

A

R

T

DVD/CD Home Cinema

OK

RETURN

Input Selection

Sound

OK

DVD/CD Home Cinema

OK

RETURN

Input Selection

Sound

Playback Disc

TOP MENU (DVD)

MENU (DVD)

Playback/menu access

Selecting the source by the remote control

DVD/CD (B 10)

Each time you press the button:

FM (B 11)

AUX

§

:

D-IN

§

:

For audio input through the AUX

terminal.

For audio input through the

OPTICAL IN terminal. (B below)

§

“(TV)” will appear beside “AUX” or

“D-IN”, indicating the TV audio setting for

VIERA Link “HDAVI Control” (B 20).

iPod (B 22)

USB (B 23)

Making settings for digital audio input

1 While in “D-IN” mode

Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.

2 While the selected mode is displayed

Press [3, 4] to make the setting.

MAIN/SAP mode (Only works with Dolby Dual Mono):

MAIN, SAP

§

, MAIN+SAP

§

(stereo audio)

§

“SAP” = Secondary Audio Program

Dynamic Range Compression

DRC ON: Adjust for clarity even when the volume is low by

compressing the range of the lowest sound level and the

highest sound level. Convenient for late night viewing.

(Only works with Dolby Digital)

DRC OFF

: The full dynamic range of the signal is reproduced.

PCM FIX mode

PCM ON: Select when receiving only PCM signals.

PCM OFF

: Select when receiving Dolby Digital and PCM signals.

DVD

EXT-IN

RADIO

iPod

USB

12

SC-PTX60EG_eng.book Page 12 Tuesday, May 26, 2009 1:38 PM

13

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Enjoying various sound effects

≥ The following sound effects may not be available or may have no effect

with some sources, or when headphones are used (B 35).

≥ You may experience a reduction in sound quality when these sound

effects are used with some sources. If this occurs, turn the sound effects

off.

Except [DivX]

You can enhance the surround effect for low volume 5.1-channel sound.

(Convenient for late night viewing.)

Enjoying surround sound effects

Each time you press the button:

STANDARD:

Sound is output as it was recorded/encoded.

You can enjoy 5.1-channel surround-like effect

only when playing sources with surround effect.

STEREO:

You can play any source in stereo.

Surround sound effect is unavailable.

A.SRND:

You can enjoy 5.1-channel surround-like effect

with any audio source.

SURROUND

SOUND

W.SRD

OK

SOUND

SURROUND

-

CH SELECT

SETUP

W.SRD

SOUND

SURROUND

W.SRD

SURROUND

Selecting sound mode

1

Select a sound mode.

Each time you press the button:

EQ: Equalizer

SUBW LVL: Subwoofer Level

2

While the selected

mode is displayed

Make settings.

Refer to the following for setting details of each

sound effect.

Equalizer

You can select sound quality settings.

Each time you press [2, 1]:

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

SOFT: For background music.

FLAT: Cancel (no effect is added).

Subwoofer level

You can adjust the amount of bass. The unit automatically

selects the most suitable setting according to the type of

playback source.

Each time you press [2, 1]:

SUB W 1

,#

SUB W 2

,#

SUB W 3

,#

SUB W 4

^-------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

Whisper-mode Surround

≥ “(( ))” lights when there is effect.

Each time you press the button:

WHISPER-MODE SRD ON



WHISPER-MODE SRD OFF

SOUND

W.SRD

13

SC-PTX60EG_eng.book Page 13 Tuesday, May 26, 2009 1:38 PM

14

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Basic play

Preparation

To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.

[Note]

≥ DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.

To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are finished with the menus.

≥ Total title number may not be displayed properly on iR/iRW.

≥ ABOUT DIVX VIDEO:

DivX

®

is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.

≥ During disc playback the sliding door will not open when [iPod < OPEN/CLOSE] is pressed.

– If [iPod < OPEN/CLOSE] is pressed twice, disc playback will stop and the sliding door will open.

≥ Keep your fingers away from the sliding door when it is moving to avoid minor injuries.

If you are experiencing problems, refer to troubleshooting (B 30 to 32)

Using the main unit

VOLUME

SELECTOR

, + VOLUME

3

1

(Stop)

OPEN/CLOSE

4

2

&8&

OPEN/CLOSE

VOLUME

K2QF75$

(Pause)

5

Start play.

≥ Press [s, r VOLUME] to

adjust the volume.

Open the sliding door.

≥ Press the button again to close the sliding door.

≥ Forcing the sliding door open or close, will damage the

main unit.

Turn on the unit.

Press to skip.

Press and hold to:

– search during play

– start slow-motion play

during pause

≥ Press [1] (Play) to start normal play.

≥ When inserting or removing a disc, tilt the disc so as not to touch the

sliding door.

≥ Load double-sided discs so the

label for the side you want to play

is facing up.

≥ For DVD-RAM, remove the disc

from its cartridge before use.

≥ To remove the disc, hold the center and

the top right of the disc and gently pull the top right of the disc to

unlock it from the spindle.

Label facing up

EASY

SETUP

Sliding door

Insert a disc.

Place the disc onto the spindle in the center and then push the

disc down until it clicks into place.

Select “DVD/CD”.

14

SC-PTX60EG_eng.book Page 14 Tuesday, May 26, 2009 1:38 PM

15

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using the remote control

One touch

play

(during standby

mode)

The main unit automatically turns

on and starts playing the disc in the

tray.

Stop

The position is memorised while

“RESUME STOP” is on the screen.

≥ Press [1 PLAY] to resume.

≥ Press [∫ STOP] again to clear

the position.

Pause

≥ Press [1 PLAY] to restart play.

Skip

Search

(during play)

≥ Up to 5 steps.

≥ Press [1 PLAY] to start normal

play.

Slow-motion

(during pause)

≥ [VCD] Slow-motion: Forward

direction only.

≥ [MPEG4] [DivX]

Slow-motion: Does

not work.

Frame-by-

frame

(during pause)

[DVD-VR] [DVD-V] [VCD]

≥ [DVD-VR] [VCD] Forward direction

only.

RETURN

VOL

STOP

1 2 3

4 5 6

7 8

0

9

SEARCH

SKIP

SLOW

SKIP

PLAY

PAU SE

SEARCH

OK

DVD

T

O

P

M

E

N

U

10

&

+

4

'

%

6



0

#

8

+

)

#

6

1

4

PLAY

LIST

MENU

FL DISPLAY

1

2

5

SLOW, SEARCH

,

SKIP

PAUSE

STOP

OK

RETURN

MENU, PLAY LIST

FL DISPLAY

TOP MENU,

DIRECT NAVIGATOR

Numbered

buttons

+, VOL

PLAY

STOP

PAUSE

SKIP SKIP

—

SEARCH

SLOW

SEARCH

OK

On-screen

item select

Enter number

[DVD-VR] [DVD-V] [VCD] [CD]

e.g. To select 12:

[S10] B [1] B [2]

[VCD] with playback control

Press [∫ STOP] to cancel the PBC

function, and then press the

numbered buttons.

Disc menu

[DVD-V]

Shows a disc top menu.

[DVD-VR]

Press the button to show the

programs (B 17).

[DVD-V]

Shows a disc menu.

[DVD-VR]

Press the button to show a play list

(B 17).

[VCD] with playback control

Shows a disc menu.

Return to

Main unit

display

[DVD-VR] [DVD-V] [WMA] [MP3]

[MPEG4] [DivX]

Time display

,-. Information display

(e.g. [DVD-VR] Program

number)

[JPEG]

SLIDE

,-.Contents number

OK

Select

Confirm

—

1 2 3

4 5 6

7 8

0

9

10

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

PLA

Y

LIST

MENU

RETURN

—

-

SLEEP

FL DISPLA

Y

15

SC-PTX60EG_eng.book Page 15 Tuesday, May 26, 2009 1:38 PM

16

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other modes of play

This works only when the elapsed play time can be displayed. It also

works with all JPEG content.

Items shown differ depending on the type of disc and playback mode.

Preparation

≥ [DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

≥ If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or

“VIDEO” (B 17, Using PLAYBACK MENU), then proceed with the

above.

≥ For a disc with both WMA/MP3 and JPEG contents, select either music

or picture contents.

WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.

JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”.

≥ [DVD-V] Some items cannot be played even if you have programmed

them.

To select all the items

Press [3, 4] to select “ALL” and press [OK].

To clear the selected program

1Press [1] and then press [3, 4] to select the program.

2Press [CANCEL].

To clear the whole program

Press [1] several times to select “CLEAR ALL”, and then press [OK].

The whole program is also cleared when the sliding door is opened, the

unit is turned off or another source is selected.

Repeat play

During play

Select an item to be repeated.

e.g. [DVD-V]

`TITLE ---. `CHAP. ---. `OFF

^----------------------------------------------------b

To cancel, select “OFF”.

Program and Random play

[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]

While stopped

Select the play mode.

Program and random playback screens appear

sequentially.

Program ------------------------------------------) Random

^--- Exit program and random screens (}

RETURN

PLAY

OK

CANCEL

PLAY MODE

REPEAT

OK

RETURN

CANCEL

PLAY

REPEAT

PLAY MODE

REPEAT

PLAY MODE

Program play (up to 30 items)

1

Select an item.

e.g. [DVD-V]

≥ Repeat this step to program other items.

≥ To return to the previous menu, press

[RETURN].

2

Start play.

Random play

1

(Only when the disc has groups or multiple

titles.)

Select a group or title.

e.g. [DVD-V]

≥ “¢” represents selected. To deselect,

press [OK] again.

2

Start play.

OK

DVD-V PROGRAM

SELECT TITLE

TITLE CHAPTER

TITLE 1

TITLE 2

TITLE 3

TITLE 4

1

2

3

4

5

6

7

8

9

10

START:PLAY

CLEAR ALL

PLAY

OK

DVD-V RANDOM

SELECT TITLE

PRESS PLAY TO START

TITLE 1

TITLE 2

TITLE 3

PLAY

16

SC-PTX60EG_eng.book Page 16 Tuesday, May 26, 2009 1:38 PM

17

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using navigation menus

[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to

play WMA, MP3, JPEG, MPEG4 or DivX contents.

“PLAYBACK MENU” screen appears when the disc contains both video

(MPEG4/DivX) and other format (WMA/MP3/JPEG).

You can select to play from your desired item while the “DATA-DISC”

screen is displayed.

e.g.

≥ To display/exit the screen, press [MENU].

Play starts from the selected content.

∫ Selecting the picture in Thumbnail menu

[JPEG]

To go to other group

1 Press [3] to select the group name.

2 Press [2, 1] to select the group and press [OK].

≥ Titles appear only if the titles are recorded on the disc.

≥ You cannot edit programs, play lists and disc titles.

This works only when the disc contains a play list.

Playing data discs

[WMA] [MP3] [JPEG] [MPEG4] [DivX]

Using PLAYBACK MENU

Select “AUDIO/PICTURE” or “VIDEO”.

≥ To start play, press [1 PLAY].

≥ To select an item to play, refer “Playing from

the selected item” (B below).

Playing from the selected item

Select an item.

≥ Press [2, 1] to skip page by page.

≥ To return to 1 level up from the current folder,

press [RETURN].

≥ Maximum: 28 characters for file/folder name.

RETURN

STOP

SKIP SKIP

PLAY

OK

T

O

P

M

E

N

U

&

+

4

'

%

6



0

#

8

+

)

#

6

1

4

PLAY

LIST

MENU

,

SKIP

OK

RETURN

MENU, PLAY LIST

TOP MENU,

DIRECT NAVIGATOR

PLAY

OK

PLAYBACK MENU

WMA/MP3/JPEG

MPEG4/DivX

AUDIO/PICTURE

VIDEO

OK

DATA-DISC

ROOT

OK

RETURN

Perfume

My favorite1

My favorite2

My favorite3

Underwater

Fantasy planet

Starpersons1

Starpersons2

Group (Folder):

Content (File):

: WMA/MP3

: JPEG

: MPEG4/DivX

OK

1

While picture is

displayed

e.g.

2

Select a picture.

≥ Press [:, 9 SKIP] to skip page by

page.

Playing RAM and DVD-R/-RW (DVD-VR) discs

[DVD-VR]

Playing the programs

1

While stopped e.g.

≥ To exit the screen, press [DIRECT

NAVIGATOR].

2

Select the program.

≥ Press [2, 1] to skip page by page.

Playing a play list

1

While stopped e.g.

≥ To exit the screen, press [PLAY LIST].

2

Select the play list.

≥ Press [2, 1] to skip page by page.

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

JPEG images G 1/ 1:C 3/ 9

Group name

Group and content

number

OK

T

O

P

M

E

N

U

D

I

R

E

C

T

N

A

V

I

G

A

T

O

R

PG

DATE

LENGTH

TITLE

1

0:16:02

10/11

LIVE CONCERT

02:15

2

0:38:25

12/05

AUTO ACTION

3

1:16:05

04/03

CINEMA

02:10

01:30

OK

RETURN

OK

PLA

Y

LIST

MENU

PL

DATE

LENGTH

TITLE

1

0:00:10

11/11

CITY PENGUIN

00:01

2

0:01:20

12/01

FOOTBALL

3

1:10:04

01/02

SPECIAL

01:10

01:20

OK

RETURN

OK

17

SC-PTX60EG_eng.book Page 17 Tuesday, May 26, 2009 1:38 PM

18

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Using on-screen menus

1

Show the on-screen

menu.

Each time you press the button:

Menu 1 (Disc/Play)

Menu 2 (Video)

Menu 3 (Audio)

Menu 4 (HDMI)

Exit

2

Select the item.

3

Make the settings.

4

Exit.

RETURN

1 2 3

4 5 6

7 8

0

9

PLAY

OK

F

U

N

C

T

I

O

N

S

10

CANCEL

OK

RETURN

FUNCTIONS

CANCEL

Numbered

buttons

PLAY

F

U

N

C

T

I

O

N

S

T

1

C1

1:ENG

3/2.

1 :E

OFF

TITLE SEARCH

Current item

Item name

e.g. Menu 1 (Disc/Play) [DVD-V]

OK

T

1

C 1

1:ENG

3/

1

OFF

CHAPTER SEARCH

Current setting

e.g. Menu 1 (Disc/Play) [DVD-V]

OK

RETURN

Items shown differ depending on the type of disc.

Menu 1 (Disc/Play)

TRACK SEARCH

TITLE SEARCH

CONTENT SEARCH

CHAPTER SEARCH

PG SEARCH

(Program

Search)

PL SEARCH

(Playlist Search)

To start from a specific item

≥ [VCD] This does not work when using playback

control.

e.g. [DVD-V]: T2 C5

To select numbers for data disc

e.g. 123: [S10] B [1] B [2] B [3] B [OK]

AUDIO

[DVD-V] [DivX] (with multiple soundtracks)

To select audio soundtrack

[DVD-VR] [VCD]

To select “L”, “R”, “L+R” or “L R”

[DVD-V] (Karaoke disc)

To select “ON” or “OFF” for vocals

To select “OFF”, “V1”, “V2” or “V1+V2” for

vocal selections

Actual operations depend on the disc. Read the

disc’s instructions for details.

Signal type/data

LPCM/PPCM/ D/DTS/MP3/MPEG: Signal

type

kHz (Sampling frequency)/bit/ch (Number of

channels)

≥ [DivX] It may take some time for play to start if

you change the audio on a DivX video disc.

PLAY SPEED

[DVD-VR] [DVD-V]

To change play speed

– from “k0.6” to “k1.4” (in 0.1-unit steps)

≥ Press [1 PLAY] to return to normal play.

≥ After you change the speed

– Sampling frequency of 96 kHz is converted to

48 kHz.

≥ This function may not work depending on the

disc’s recording.

REPEAT MODE

(B 16, Repeat play)

A-B Repeat (To repeat a specified section)

Except [JPEG] [MPEG4] [DivX] [DVD-VR]

(Still picture part) [VCD] (SVCD)

Press [OK] at the starting and ending points.

≥ Select “OFF” to cancel.

SUBTITLE

[DVD-V] [DivX] (with multiple subtitles)

[VCD] (SVCD only)

To select subtitle language

≥ On iR/iRW, a subtitle number may be shown

for subtitles that are not displayed.

[DVD-VR] (with subtitle on/off information)

To select “ON” or “OFF”

≥ This may not work depending on the disc.

[DivX] (B 26, Displaying DivX subtitles text)

ANGLE

[DVD-V] (with multiple angles)

To select a video angle

3/2 .1ch

.0: No surround

.1: Mono surround

.2: Stereo surround (left/right)

.1: Low frequency effect

(not displayed if there is no signal)

.1: Center

.2: Front leftiFront right

.3: Front leftiFront rightiCenter

e.g.

18

SC-PTX60EG_eng.book Page 18 Tuesday, May 26, 2009 1:38 PM

19

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Confirming HDMI information

1 Connection status

2 Shows the output signal type.

3 Shows the number of audio channels.

4 (B above, VIDEO FORMAT)

5 (B above, COLOUR SPACE)

[Note]

When “OFF” is selected in “AUDIO OUT” (B 25, HDMI menu), “– – –” will

be displayed in “AUDIO STREAM”.

DATE DISPLAY

[JPEG] To select “ON” or “OFF” for picture’s

date display

ROTATION

To rotate a picture (during pause)

[JPEG]:

0,------. 90,------.180,------.270

^--------------------------------------------J

Menu 2 (Video)

PICTURE MODE

NORMAL

CINEMA1:

CINEMA2:

DYNAMIC:

ANIMATION:

Mellows images and enhances

detail in dark scenes.

Sharpens images and enhances

detail in dark scenes.

Enhances the contrast for

powerful images.

Suitable for animation.

ZOOM

To select zoom sizes

NORMAL, AUTO (

[DVD-VR]

[DVD-V] [VCD]

),

k

2,

k

4

≥ [JPEG]: during pause

TRANSFER

MODE

If you have chosen “480p”/“576p”/“720p”/“1080p”

(progressive), “1080i” (interlaced)

[“VIDEO FORMAT” in Menu 4 (HDMI)], select the

method of conversion for progressive output to

suit the type of material.

≥ The setting will return to “AUTO” or “AUTO1”

when the sliding door is opened, the unit is

turned off or another source is selected.

When playing PAL discs

AUTO:

VIDEO:

FILM:

Automatically detects the film and

video content, and appropriately

converts it.

Select when using “AUTO”, and

the content is distorted.

Select this if the

edges of the film

content appear

jagged or rough

when “AUTO” is

selected.

However, if the video content is

distorted as shown in the

illustration to the right, then select

“AUTO”.

When playing NTSC discs

AUTO1:

AUTO2:

VIDEO:

Automatically detects the film and

video content, and appropriately

converts it.

In addition to “AUTO1”,

automatically detects film

contents with different frame rates

and appropriately converts it.

Select if the video content is

distorted when using “AUTO1” or

“AUTO2”.

SOURCE

SELECT

[DivX]

When you select “AUTO” the constructing

method of the DivX contents is automatically

distinguished and output. If the picture is

distorted, select “INTERLACE” or

“PROGRESSIVE” depending on which

constructing method was used when the contents

were recorded to disc.

AUTO, INTERLACE, PROGRESSIVE

JPG

DATE

Menu 3 (Audio)

DIALOGUE

ENHANCER

To make the dialogue in movies easier to hear

[DVD-V] (Dolby Digital, DTS, 3-channel or higher,

with the dialogue recorded in the center channel)

[DivX] (Dolby Digital, 3-channel or higher, with the

dialogue recorded in the center channel)

OFF, ON

Menu 4 (HDMI)

HDMI STATUS

To show HDMI information.

(B below, Confirming HDMI information)

HD ENHANCER

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 25, HDMI

menu) set to “ON”.

To sharpen the “720p”, “1080i” and “1080p”

picture quality

OFF, 1 (weakest) to 3 (strongest)

VIDEO FORMAT

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 25, HDMI

menu) set to “ON”.

To select suitable picture quality with your TV

(Video recordings will be converted to, and output

as, high-definition video.)

§

480p/576p/720p/1080p (progressive)

§

480i/576i/1080i (interlaced)

≥ If the picture is distorted, press and hold

[CANCEL] until the picture is displayed

correctly. (The output will return to “480p”/

“576p”.)

§

The numbers displayed depend on the disc

being played. One of the above numbers is

displayed.

COLOUR SPACE

This works when the HDMI connection is being

used with “VIDEO PRIORITY” (B 25, HDMI

menu) set to “ON”.

To select suitable picture colour with your TV

YCbCr 4:2:2

YCbCr 4:4:4

RGB

≥ If the setting above is not compatible with your

TV, it will not be displayed.

e.g.

HDMI

H D M I --- I N F O R M ATION

CONNECTED STATE

AUDIO STREAM

MAX CHANNEL

VIDEO FORMAT

COLOUR SPACE

CONNECTED

PCM

2ch

720p

YCbCr 4:4:4

1

2

3

4

5

19

SC-PTX60EG_eng.book Page 19 Tuesday, May 26, 2009 1:38 PM

20

RQTX1002

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other Operating

Using the VIERA Link “HDAVI Control

TM

”

VIERA Link “HDAVI Control”

VIERA Link “HDAVI Control” is a convenient function that offers linked

operations of this unit, and a Panasonic TV (VIERA) under “HDAVI

Control”. You can use this function by connecting the equipment with the

HDMI cable. See the operating instructions for connected equipment for

operational details.

≥ VIERA Link “HDAVI Control”, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC (Consumer

Electronics Control), is a unique function that we have developed and

added. As such, its operation with other manufacturers’ equipment that

supports HDMI CEC cannot be guaranteed.

≥ This unit supports “HDAVI Control 4” function.

“HDAVI Control 4” is the newest standard (current as of December,

2008) for Panasonic’s HDAVI Control compatible equipment. This

standard is compatible with Panasonic’s conventional HDAVI

equipment.

≥ Please refer to individual manuals for other manufacturers’ equipment

supporting VIERA Link function.

The TV with “HDAVI Control 2 or later” function enables the following

operation: VIERA Link Control only with TV’s remote control (for

“HDAVI Control 2 or later”) (B 21).

Preparation

≥ Confirm that the HDMI connection has been made (B 8).

≥ Set “VIERA Link” to “ON” (B 25, HDMI menu).

≥ To complete and activate the connection correctly, turn on all VIERA

Link “HDAVI Control” compatible equipment and set the TV to the

corresponding HDMI input mode for this unit.

Whenever the connection or settings are changed, reconfirm the points

above.

(Available when using VIERA Link “HDAVI Control” with

“HDAVI Control 3 or later” compatible TV)

This function automatically provides synchronised audio and video

output. (This works only when the source is “DVD/CD”, “USB”, “AUX” or

“D-IN”.)

≥ When using “DVD/CD” or “USB” as the source, set “TIME DELAY” in

VIDEO menu to “0 ms/AUTO” (B 24).

You can turn on this unit and the TV, and start playing the disc with a

single press of a button.

[Note]

Playback may not be immediately displayed on the TV. If you miss the

beginning portion of playback, press [:] or [6] to go back to where

playback started.

≥ When you switch the TV input to TV tuner mode, this unit will

automatically switch to “AUX”

§

or “D-IN”

§

. (For “IPOD” mode, this works

only in iPod music mode, or when iPod is not connected.)

≥ When this unit is in “DVD/CD” mode, the TV will automatically switch its

input mode for this unit.

≥ When playback stops ([DVD-V] [VCD]) or when this unit turns off, the TV

will automatically return to TV tuner mode.

≥ When you select

“AUX”

§

or “DIGITAL IN”

§

from “Input Selection” in

START menu (B 12), the TV will automatically switch to TV tuner mode.

When the TV is turned off, this unit goes into standby mode automatically.

To continue audio playback even when the TV is turned off, select

“VIDEO” (B 25, “POWER OFF LINK” in HDMI menu).

[Note]

≥ When you press [Í], only this unit turns off. Other connected equipment

compatible with VIERA Link “HDAVI Control” stays on.

≥ If this unit is connected to a “HDAVI Control 4” compatible TV with the

“Intelligent Auto Standby” setting activated on the TV, the main unit will

be automatically turned to standby under the following conditions:

e.g.,

For details, refer also to the operating instructions for your TV.

Setting the TV audio for VIERA Link “HDAVI Control”

Select “AUX” or “DIGITAL IN” to work with the linked operations.

Refer to TV audio setting in Easy setup (B 10) or “TV AUDIO” in HDMI

menu (B 25).

Confirm the audio connection to the AUX terminal (for “AUX”) or

OPTICAL IN terminal (for “DIGITAL IN”) (B 8, 9).

§

“AUX” or “D-IN” (“DIGITAL IN”) works depending on the TV audio

setting (B above, Setting the TV audio for VIERA Link “HDAVI

Control”).

SEARCH

SKIP

PLAY

SEARCH

SKIP

PLAY

Auto lip sync

One touch play

During standby mode

Start disc playback.

This unit’s speakers will be automatically

activated (B 21).

Auto input switching

Power off link

– when changing the TV input from the one the main unit is

connected to

– when changing the speaker use from this unit’s speakers to the

TV speakers

PLAY

20

SC-PTX60EG_eng.book Page 20 Tuesday, May 26, 2009 1:38 PM

Stránka sa načítava ...

Panasonic SCPTX60 Návod na obsluhu

Panasonic SCPTX60 Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty