EKOM Duo Používateľská príručka

DUO

DUO 2V, DUO 2

User manual

EN

Manuel de l’utilisateur

FR

Руководство пользователя

RU

Instrukcja obsługi

PL

Návod na použitie

SK

Návod k použití

CS

Benutzerhandbuch

DE

N

COMPRESSOR

KOMPRESSOR

COMPRESSEUR

КОМПРЕССОР

SPRĘŻARKA

KOMPRESOR

DUO

DUO 2V, DUO 2

EKOM spol. s r. o.

Priemyselná 5031/18

SK-921 01 Piešťany

Slovak Republic

tel.: +421 33 7967255

fax: +421 33 7967223

www.ekom.sk

email: ekom@ekom.sk

DATE OF LAST REVISION

DATUM DER LETZTEN ÜBERARBEITUNG

DATE DE LA DERNIÈRE RÉVISION

ДАТА ПОСЛЕДНЕЙ РЕДАКЦИИ

DATA OSTATNIEJ AKTUALIZACJI

DÁTUM POSLEDNEJ REVÍZIE

DATUM POSLEDNÍ REVIZE

11/2023

NP-DUO-17_11-2023-MD

112000355-000

CONTENTS ................................................................................ 5

INHALT ....................................................................................... 46

TABLES DES MATIÈRES .......................................................... 88

ОГЛАВЛЕНИЕ ........................................................................... 130

SPIS TREŚCI .............................................................................. 174

OBSAH ....................................................................................... 216

OBSAH ....................................................................................... 258

 
DUO, DUO 2V, DUO 2 
11/2023  - 5 -  NP-DUO-17_11-2023-MD 
 
 
 
 
 
 
CONTENTS 
 
IMPORTANT INFORMATION .................................................................................................... 6 
CONFORMITY WITH THE REQUIREMENTS OF EUROPEAN UNION DIRECTIVES ...... 6 
INTENDED USE................................................................................................................ 6 
CONTRAINDICATIONS AND SIDE-EFFECTS ................................................................. 6 
WARNINGS AND SYMBOLS ............................................................................................ 6 
WARNINGS ...................................................................................................................... 7 
STORAGE AND TRANSPORT ......................................................................................... 9 
TECHNICAL DATA ......................................................................................................... 10 
PRODUCT DESCRIPTION ............................................................................................. 16 
PRODUCT FUNCTIONALITY ......................................................................................... 18 
PNEUMATIC DIAGRAM .................................................................................................. 23 
INSTALLATION ....................................................................................................................... 24 
CONDITIONS FOR USE ................................................................................................. 24 
PLACEMENT OF THE COMPRESSOR .......................................................................... 25 
PNEUMATIC CONNECTIONS ........................................................................................ 28 
ELECTRICAL CONNECTIONS ....................................................................................... 31 
CONNECTION DIAGRAM ............................................................................................... 33 
OPERATION ............................................................................................................................ 35 
COMMISSIONING .......................................................................................................... 35 
SWITCHING THE COMPRESSOR ON ........................................................................... 36 
COMPRESSOR SHUT-DOWN ....................................................................................... 36 
MAINTENANCE ....................................................................................................................... 37 
DEVICE MAINTENANCE ................................................................................................ 37 
TROUBLESHOOTING ............................................................................................................. 44 
REPAIR SERVICE .......................................................................................................... 45 
STORAGE ....................................................................................................................... 45 
DISPOSAL OF THE DEVICE .......................................................................................... 45 
ANNEX................................................................................................................................... 300 
INSTALLATION RECORD ............................................................................................ 300 
 
 
   

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 6 - 11/2023

IMPORTANT INFORMATION

1. CONFORMITY WITH THE REQUIREMENTS OF EUROPEAN UNION DIRECTIVES

This product conforms to the requirements of the Medical Device Directive (93/42/EEC), and is

safe for the intended use if all safety instructions are followed.

2. INTENDED USE

The compressor and suction unit is used as a source of clean, oil-free compressed air to power

and cool compressed air devices on dental sets, and as a source of vacuum for suction systems.

The device can be used with all types of dental sets equipped with a suction block.

Compressed air supplied by the compressor is unsuitable for use with artificial

lung ventilation devices without further filtration.

Any other use of the product beyond its intended use is considered an incorrect use. The

manufacturer is not liable for any damages or injuries resulting from the incorrect use.

3. CONTRAINDICATIONS AND SIDE-EFFECTS

There are no contraindications or side-effects known.

4. WARNINGS AND SYMBOLS

The following symbols are used in the user manual, device and its packaging to denote important

details and information:

General warnings

Warning

Danger, electric shock hazard

Refer to instruction manual

CE-marking

Medical device

Serial number

Article number

Unique Device Identifier

Compressor is controlled automatically and may start without warning

DUO, DUO 2V, DUO 2

11/2023 - 7 - NP-DUO-17_11-2023-MD

Caution! Hot surface

Ground connection

Terminal for ground connection

Handling mark on package – FRAGILE

Handling mark on package – THIS SIDE UP

Handling mark on package – KEEP DRY

Handling mark on package – TEMPERATURE LIMITATIONS

Handling mark on package – LIMITED STACKING

Mark on package – RECYCLABLE MATERIAL

Manufacturer

Danger of biological hazard

5. WARNINGS

The product is designed and manufactured to be safe for the user and the surrounding

environment when used in the defined manner. Keep the following warnings in mind.

5.1. General warnings

READTHE USER MANUAL CAREFULLY BEFORE USING THE DEVICE AND KEEPIT FOR

FUTURE USE!

• The user manual supports the correct installation, operation and maintenance of the product.

Careful review of this manual will provide the information necessary for the correct operation of

the product for its intended use.

• Original packaging should be retained for the return of the device. Only the original packaging

ensures protection of the device during transport. If it is necessary to return the product during

the warranty period, the manufacturer is not liable for damages caused by improper packaging.

• This warranty does not cover damages originating from the use of accessories other than those

specified or recommended by the manufacturer.

• The manufacturer only guarantees the safety, reliability and function of the device if:

- installation, new settings, changes, expansion, and repairs are performed by the

manufacturer or an organisation authorised by the manufacturer.

- the product is used pursuant to the user manual.

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 8 - 11/2023

• The user manual corresponds to the configuration of the product and its compliance with the

applicable safety and technical standards at the time of printing. The manufacturer reserves all

rights for the protection of its configuration, methods and names.

• This user manual is the original instructions. Translation is performed in accordance with the

best available knowledge.

5.2. General safety warnings

The manufacturer designed and manufactured the product to minimise all risks when used

correctly for the intended use. The manufacturer considers it its obligation to lay down the following

general safety precautions.

• Use and operation of the product must comply with all laws and local regulations valid in the

place of use. The operator and user are responsible for following all the appropriate regulations

in the interests of performing work safely.

• Only the use of original parts guarantees the safety of operating personnel and the flawless

operation of the product itself. Only the accessories and parts mentioned in the technical

documentation or expressly approved by the manufacturer should be used.

• The operator must ensure that the device is functioning correctly and safely before every use.

• The user must be familiar with the operation of the device.

• Do not use the product in environments with a risk of explosion.

• The user must inform the supplier immediately if any problem directly related to the operation of

the device occurs.

5.3. Safety warnings on protection from electric current

• The device must only be connected to a properly installed, earthed socket.

• Before the product is plugged in, ensure that the mains voltage and frequency stated on the

product are in compliance with thevalues of the mains.

• Prior to putting the device into operation check for any damage to the connected pneumatic

lines and electrical wiring. Replace damaged pneumatic lines and electrical wiringsimmediately.

• Immediately disconnect the product from the mains (remove power cord from the socket) in

hazardous situations or in the case of a technical malfunction.

• During all repairs and maintenance, ensure that:

- the mains plug is removed from the power socket

- pressure is vented from the air tank and pipes

• The product shall only be installed by a qualified technician.

DUO, DUO 2V, DUO 2

11/2023 - 9 - NP-DUO-17_11-2023-MD

6. STORAGE AND TRANSPORT

The compressor is shipped from the factory in a transport packaging. This protects the device from

damage during transport.

The original compressor packaging must be used for transport whenever

possible. Transport the compressor in an upright position, always secured with

transport fixation.

Protect the compressor from moisture, dirt and extreme temperatures during transport

and storage. Store the compressor in its original packaging in a warm, dry, and dust-

free area. Do not store near any chemical substances.

Keep the packaging material, if possible. If not, please dispose of the packaging

material in an environmentally-friendly way. Packaging cardboard can be recycled with

old paper.

The compressor may only be transported when all air pressure has been vented.

Before moving or transporting the compressor, release all air pressure from the

tank and hoses and drain condensate from the air tank.

Storing or shipping the equipment in any conditions other than those specified

below is prohibited.

Ambient conditions for storage and transport

Products may only be stored and transported in vehicles that are free of any traces of volatile

chemicals under the following conditions:

Temperature

–25°C to +55°C, 24 h at up to +70°C

Relative humidity

max. 90% (non-condensing)

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 10 - 11/2023

7. TECHNICAL DATA

Compressors are designed for dry and ventilated indoor environments with the following

conditions:

Temperature

+5°C to +40°C

Relative humidity

max. 70%

DUO

DUO/M

Compressor 6 – 8 bar

DK50 PLUS

DK50 PLUS/M

Suction unit

1

Nominal voltage / frequency (*)

V / Hz

230 / 50

230 / 60

230 / 50

230 / 60

Performance

at 6 bar

Lit.min-1

70

80

60

70

Working pressure (**)

bar

6.0 – 8.0

Suction unit capacity at 5 kPa

Lit.min-1

800

Suction unit vacuum, max.

kPa

12

Max. current

A

7.0

8.0

7.2

8.1

Compressor motor rating

kW

0.55

Air tank volume

Lit.

25

Air quality – filtration

m

-

0.1

Maximum operating pressure of safety valve

bar

11.0

Noise level at 5 bar

LpfA [dB]

47

50

47

50

Duty cycle

S1-100%

PDP drying performance at 7 bar

-

 +3°C

Time to fill air tank from 0 to 7 bar

s

149

126

198

159

Dimensions (net)

w x d x h

mm

560x684x1251

Net weight (***)

kg

114

119

Classification under EN 60601-1

Class I.

Classification pursuant to MDD 93/42 EEC,2007/47 EC

IIa

Notes:

(*) When ordering, state the version of the compressor

(**) For other range of pressure:consult with the supplier

(***) Information about the weight is for informative purposes only and applies to the product without any

additional accessories.

DUO, DUO 2V, DUO 2

11/2023 - 11 - NP-DUO-17_11-2023-MD

Dependence of compressor output on working pressure

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 12 - 11/2023

DUO 2V

DUO 2V/M

DUO 2

DUO 2/M

Compressor 6 – 8 bar

DK50 2V

DK50 2V/M

DK50 2V

DK50 2V/M

Suction unit

1

2

Nominal voltage / frequency (*)

V / Hz

230 / 50

230 / 60

230 / 50

230 / 60

230 / 50

230 / 60

230 / 50

230 / 60

Performance

at 6 bar

Lit.min-1

135

104

135

104

Working pressure (**)

bar

6.0 – 8.0

Suction unit capacity at 5 kPa

Lit.min-1

800

2x800

Suction unit vacuum, max.

kPa

12

Max. current

A

11.8

12.5

12.0

12.7

14.8

15.4

15.0

15.6

Compressor motor rating

kW

1.2

Air tank volume

Lit.

25

Air quality – filtration

m

-

0.1

-

0.1

Maximum operating pressure of

safety valve

bar

11.0

Noise level at 5 bar

LpfA [dB]

 51.5

 55.0

 51.5

 55.0

Operating mode

S1-100%

PDP drying performance at 7 bar

-

 +3°C

-

 +3°C

Time to fill air tank from 0 to 7

bar

s

61

78

61

78

Dimensions (net)

w x d x h

mm

560x684x1251

Net weight (***)

kg

121

126

133

138

Classification under EN 60601-1

Class I.

Classification pursuant to MDD 93/42

EEC,2007/47 EC

IIa

Notes:

(*) When ordering, state the version of the compressor

(**) For other range of pressure:consult with the supplier

(***) Information about the weight is for informative purposes only and applies to the product without any

additional accessories.

Dependence of compressor output on working pressure

DUO, DUO 2V, DUO 2

11/2023 - 13 - NP-DUO-17_11-2023-MD

7.1. Free air delivery (FAD) correction due to elevation

Capacity given in the form of FAD („Free Air Delivery“) applies to the following conditions:

Altitude

0 m.n.m.

Temperature

20°C

Atmospheric pressure

101325 Pa

Relative humidity

0%

To calculate FAD compressor capacity in dependence on altitude, it is necessary to apply

correction factor according to the following table:

Altitude [m.n.m.]

0 -1500

1501 - 2500

2501 - 3500

3501 - 4500

FAD correction factor

1

0.80

0.71

0.60

7.2. Electromagnetic compatibility declaration

Medical equipment needs special precautions regarding electromagnetic compatibility (EMC) and

needs to be installed and put into service according to the EMC information provided below.

Guidance and manufacturer's declaration - electromagnetic emissions

Pursuant to IEC 60601-1-2:2014 - Medical electrical equipment - Part 1-2: General requirements for

basic safety and essential performance - Collateral Standard: Electromagnetic disturbances

The equipment is intended for use in the electromagnetic environment specified below. The customer or the

user of the equipment should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment - guidance

RF emissions CISPR 11

Group 1

The equipment uses RF energy only for its

internal functions. Therefore, the RF emissions

are very low and are not likely to cause any

interference in nearby electronic equipment.

RF emissions CISPR 11

Class B

The equipment is suitable for use in all

establishments, including domestic

establishments and those directly connected to

the public low voltage power supply

network that supplies buildings used for domestic

purposes.

Harmonic emissions IEC

61000-3-2

Class A

Voltage fluctuations/ flicker

emissions IEC 61000-3-3

The equipment is not likely

to cause any flicker, as the

current flow is approx.

constant after the start up.

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 14 - 11/2023

Guidance and manufacturer's declaration - electromagnetic immunity

Pursuant to IEC 60601-1-2:2014 - Medical electrical equipment - Part 1-2: General requirements for

basic safety and essential performance - Collateral Standard: Electromagnetic disturbances

The equipment is intended for use in the electromagnetic environment specified below. The customer or the

user of the equipment should assure that it is used in such an environment.

Immunity test

IEC 60601-1-2

test level

Compliance level

Electromagnetic environment -

guidance

Electrostatic

discharge (ESD)

IEC 61000-4-2

±8 kV contact

±15 kV air

±8 kV contact

±15 kV air

Floors should be wood, concrete

or ceramic tile. If floors are covered with

synthetic material, the relative humidity

should be at least 30%.

Electrical fast

transient/burst

IEC 61000-4-4

±2 kV for power

supply

lines

±1 kV for

input/output lines

±2 kV

100 kHz repetition

frequency

Applied to mains

connection

Mains power quality should be

that of a typical commercial or hospital

environment.

Surge

IEC 61000-4-5

±1 kV differential

mode

±2 kV common

mode

±1 kV L-N

±2 kV L-PE; N-PE

Applied to mains

connection

Mains power quality should be that of a

typical commercial or hospital

environment.

Voltage dips,

short interruption,

and voltage

variations on

power

supply

input lines IEC

60601-4-11

UT=0%, 0,5 cycle

(at 0, 45, 90, 135,

180, 225, 270 and

315°)

UT=0%, 1 cycle

UT=70% 25/30

cycles (at 0°)

UT=0%, 250/300

cycles

UT=>95%, 0,5 cycle

(at 0, 45, 90, 135, 180,

225, 270 and 315°)

UT=>95%, 1 cycle

UT=70% (30% dipp UT),

25(50Hz)/30(60Hz)

cycles (at 0°)

UT=>95%,

250(50Hz)/300(60Hz)

cycle

Mains power quality should be

that of a typical commercial or hospital

environment.

The device stops and restarts

automatically at each dip. In this case

does not occur unacceptable pressure

drop.

Power frequency

(50/60 Hz)

IEC 61000-4-8

N/A

The equipment does not contain

magnetically sensitive components or

circuits.

NOTE: UT is the A.C. mains voltage prior to application of the test level.

DUO, DUO 2V, DUO 2

11/2023 - 15 - NP-DUO-17_11-2023-MD

Guidance and manufacturer's declaration - electromagnetic immunity

Pursuant to IEC 60601-1-2:2014 - Medical electrical equipment - Part 1-2: General requirements for

basic safety and essential performance - Collateral Standard: Electromagnetic disturbances

The equipment is intended for use in the electromagnetic environment specified below. The customer or the

user of the equipment should assure that it is used in such an environment.

Immunity test

IEC 60601-1-2 test

level

Compliance level

Electromagnetic environment - guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

Proximity fields

from RF wireless

communications

equipment

IEC 61000-4-3

3 Vrms

150 kHz to 80MHz

3 V/m

80 MHz to 2,7 GHz

9 to 28 V/m

15 specific

frequencies

(380 to 5800 MHz)

3 Vrms

3 V/m

9 to 28 V/m

15 specific

frequencies

(380 to 5800 MHz)

Portable and mobile RF communications

equipment should be used no closer to any

part of the equipment, including cables, than

the recommended separation distance

calculated from the equation applicable to

the frequency of the transmitter.

Recommended separation distance

d=1,2√ P

d=1,2√ P, 80 MHz to 800 MHz

d=2,3√ P, 800 MHz to 2,7 GHz

where P is the maximum output power

rating of the transmitter in watts (W)

according to the transmitter manufacturer

and d is the recommended separation dis-

tance in metres (m).

Field strengths from fixed RF transmitters,

as determined by an electromagnetic site

survey a, should be less than the compliance

level in each frequency range b. Interference

may occur in the vicinity of equipment

marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected

by absorption and reflection from structures, objects and people.

a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)

telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast

cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to

fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field

strength in the location in which the equipment is used exceeds the applicable RF compliance level

above, the equipment should be observed to verify normal operation. If abnormal performance is

observed, additional measures may be necessary, such as re-orienting or relocating the

equipment.

b Over the frequency range 150 kHz to 80 kHz, field strengths should be less than 3 V/m.

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 16 - 11/2023

8. PRODUCT DESCRIPTION

8.1. Variants

Compressor models are designed in the following variants:

DUO

This model is used for dental set models equipped with a suction block and designed

for installation directly in the office

DUO 2

Models designed to operate with dental equipment sets equipped with a suction

block. They are designed to supply two such dental equipment sets, i.e. two

workstations

DUO 2V

Models designed to operate with dental equipment sets equipped with a suction

block. They are designed to supply sets that use higher quantities of compressed air

DUO/M

Identical to the DUO model, but equipped with a membrane dryer

DUO 2V/M

Identical to the DUO 2V model, but equipped with a membrane dryer

DUO 2/M

Identical to the DUO 2 model, but equipped with a membrane dryer

DUO

DUO 2V

DUO 2

8.2. Accessories

Accessoriesnot included in the standard order must be ordered separately!

8.2.1. Automatic condensate drain

The automatic condensate drain (AOK) automatically drains condensate from the compressor’s air

tank based on a pre-set time interval. The condensate drain (AOK) is a suitable accessory for

compressor models without dryers.

8.2.1. Set of compressed air outlet filters

The compressor may be equipped with a set of filters if specified. The filter set may be equipped

with an air pressure regulator.

Where a different level of air filtration is required, this requirement must be

agreed upon with the supplier and specified in the order.

Type

Use

Article number

AOK 11

DK50 PLUS,DK50 2V

447000001-047

DUO, DUO 2V, DUO 2

11/2023 - 17 - NP-DUO-17_11-2023-MD

Type

Use

Level of filtration (µm)

Article number

FS 30F

DK50 PLUS

Dk50 PLUS/M

DK50 2V

DK50 2V/M

1

604014119-014

FS 30M

1+0.1

604014119-015

FS 30S

1+0.01

604014119-017

FS 30A

1+0.01+A**

604014119-018

**) A – submicrofilter with activated carbon

8.2.2. Filter set regulator assembly

The compressor may be equipped with a pressure regulator of the compressed air outlet if

specified. The regulator must be selected according to the application to the filter set, or separately

The regulator shall ensure constant pressure at the outlet.

Type

Use

Article number

Regulator complete

(to the filter assembly)

DK50 PLUS, DK50 PLUS/M

DK50 2V, DK50 2V/M

604014130-000

REG11 (separate)

447000001-077

8.2.3. Filter set brackets

A suitable bracket must be ordered for every filter set.

8.2.4. Condensation and filtration unit

The compressor may be additionally fitted with a condensation and filtration unit (KJF-1, KJF-2 or

KJFR-1). The KJF-1, KJF-2 or KJFR-1 ensure that the compressed air from the air tank is cooled

in the cooler and the condensate is captured in the filter and automatically separated from the

pneumatic distribution system. The compressed air is filtered at the same time.

Type

Use

Level of filtration /µm/

Pressure regulator

Article number

KJF-1

DK50 PLUS

DK50 2V

5

no

450001011-001

KJFR-1

yes

450001011-002

KJF-2

no

450001021-001

8.2.5. Noise silencer

The noise silencer, with and without a filter, dampens the “whistling” noise caused by the suction

pump impeller. Total noise reduction during suction unit operation is up to 4 dB.

• Noise silencer with a filter - a bacteriological filter is provided, making it suitable for installation

directly in the office.

• Wall-mounted noise silencer - specifically designed for wall-mounted installation.

• Wall-mounted noise silencer with a filter - specifically designed for wall-mounted installation and

equipped with a bacteriological filter.

Type

Use

Article number

Compressor-mounted

bracket

DK50 PLUS, DK50 PLUS/M

DK50 2V, DK50 2V/M

603014134-000

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 18 - 11/2023

8.2.6. Equipotential bonding socket

The socket allows an equipotential bonding. (Fig.10)

9. PRODUCT FUNCTIONALITY

Compressor with suction unit(Fig. 1)

The air pump (1) draws in atmospheric air through an inlet filter (8) and compresses it through

a non-return valve (3) into an air tank (2) from which the device draws compressed air. If the

pressure in the air tank drops to the switch-on pressure, the pressure switch (4) turns on the

compressor and the compressor supplies compressed air into the air tank until it reaches the

switch-off pressure, when the compressor switches off. The pressure hose is vented through the

relief solenoid valve (13) once the air pumpis shut off. The safety valve (5) prevents the pressure in

the air tank from rising above the maximum allowed value. The drain valve (7) drains condensate

from the air tank. Compressed, oil-free filtered air is stored in the air tank ready for use.

Condensate must be drained from the air tank at regular intervals (see Chapter 19.1).

The suction pump (36) (two aggregates on DUO2) draws in air, thereby creating vacuum in the

suction lines that are connected to the device and is a source of vacuum for removing foreign

substances from the doctor’s work area. This air is then exhausted through an exhaust line routed

outside the operator's work area.

Compressor with suction unitand membrane dryer (Fig. 2)

The air pump (1) draws in air through an inlet filter (8) and compresses it, feeding it to the cooler

(14) through the filter (15) and the check valve (3) into the dryer (9), and feeds the clean and dry

air into the air tank (2). A part of the air is released from the dryer with the captured moisture,

which is manifested as a light air stream along the body of the dryer (9). Condensate from the filter

is automatically drained at regular intervals into the collecting bottle via the condensate drain

solenoid valve (16). The dryer ensures continuous drying of the compressed air. The drain valve

(7) drains condensate from the air tank when drying performance is checked. Compressed, oil-free

filtered air is stored in the air tank ready for use.

For the membrane dryer to work as intended, the dryer is connected directly to the air tank without

the use of a check valve. As the membrane dryer contains selective membrane fibres, there is a

small amount of air leakage through them (about 0.5 bar/30 min).

As a result, there is a gradual, slow drop in pressure even when there is no demand for

compressed air (from the air tank), however, this is not a malfunction.

The pressure vessel does not need to be drained.

The suction pump (36) (two aggregates on DUO2) draws in air, thereby creating vacuum in the

suction lines that are connected to the device and is a source of vacuum for removing foreign

Type

Variant

Use

Kit article no.

DS2

wall-mounted, no bacteriological filter

DUO, DUO 2V, DUO2

451000Z01-004

DS2

wall-mounted, with a bacteriological filter

451000Z01-005

DS4

with a bacteriological filter

DUO,DUO 2V

451000Z01-006

DS5

with a bacteriological filter

DUO2

451000Z01-007

DS6

no bacteriological filter

DUO,DUO 2V

451000Z01-008

DS7

no bacteriological filter

DUO2

451000Z01-009

Type

Use

Name

Article no.

POAG-KBT6-EC

DUO, DUO 2V, DUO2

Zásuvka

033400075-000

FLEXI-S/POAG-HK6

Vodič (1 m)

034110083-000

DUO, DUO 2V, DUO 2

11/2023 - 19 - NP-DUO-17_11-2023-MD

substances from the doctor’s work area. This air is then exhausted through an exhaust line routed

outside the operator's work area.

Compressor cabinet(Fig.3)

The soundproof cabinetprovides compact covering of the compressor, allowing sufficient exchange

of cooling air. With its design It can be placed in a dentist’s office as apart of furniture. The fan

under the air pump of a compressor provides cooling of compressor and it is in operation at the

same time with an engine of the compressor. After prolonged use the temperature in the cabinet

may rise above 40°C, causing the cooling fan blower to automatically turn on. After cooling the

cabinet area down to 32°C the fan blower turns off automatically. Door of the casing with right

opening may be changed to left opening (see Chapter 12.2).

Make sure that nothing impedes the free flow of air under and around the

compressor. Never cover the hot air outlet on the top back side of the cabinet.

If placing the compressor on a soft floor such as carpet, create space for

ventilation between the base and floor or the cabinet and floor, e.g. underpin the

footings with hard pads.

Description for Figures 1- 3

1. Air pump

2. Air tank

3. Non-return valve

4. Pressure switch

5. Safety valve

6. Pressure gauge

7. Drain valve

8. Inlet filter

9. Dryer

10. -

11. -

12. -

13. Solenoid valve

14. Dryer cooler

15. Filter

16. Condensate drain solenoid valve

17. Compressed air outlet

18. Circuit breaker switch

19. Bottle

20. Magnetic holder

21. Fan

22. Cabinet fan

23. Door pin

24. Rectifying screw

25. Lock

26. Supporting bracket

27. Wall stop

28. Switch

29. Pressure gauge

30. Door hinge

31. Handle

32. Casters

33. Pressure gauge hose

34. Socket

35. Suction unit switching block

36. Suction unit

DUO, DUO 2V, DUO 2

NP-DUO-17_11-2023-MD - 20 - 11/2023

Fig.1 - DUO - Compressor with suction unit

Stránka sa načítava...

EKOM Duo Používateľská príručka

Tento návod je vhodný aj pre

EKOM Duo Používateľská príručka

v iných jazykoch

Súvisiace články