Electrolux EXP09HSECI Používateľská príručka

EN AIR CONDITIONER

FR CLIMATISEUR

IT CONDIZIONATORE D’ARIA

PL KLIMATYZATOR

SV LUFTKONDITIONERING

NO KLIMAANLEGG

DA KLIMAANLÆG

FI ILMASTOINTILAITE

CZ

KLIMATIZAČNÍ ZAŘÍZENÍ

EXP09HSECI

EXP11HSECI

USER MANUAL

MANUEL D’UTILISATION

MANUALE PER L’UTENTE

INSTRUKCJA OBSŁUGI

BRUKSANVISNINNG

BRUKSANVISNING

BRUGSVEJLEDNING

KÄYTTÖOHJE

NÁVOD K POUŽITÍ

2

24

46

68

90

112

134

156

178

2 www.electrolux.com

WE’RE THINKING OF YOU

CUSTOMER CARE AND SERVICE

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with

it decades of professional experience and innovation. Ingenious and stylish, it has been

designed with you in mind. So whenever you use it, you can be safe in the knowledge that

you’ll get great results every time.

Welcome to Electrolux.

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data

available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Subject to change without notice.

Warning / Caution-Safety information.

General information and tips.

Environmental information.

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com/webselfservice

Visit our website to:

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CONTENTS

1. SAFETY INFORMATION �� 3

2. SAFETY INSTRUCTION �� 6

3. UNIT DESCRIPTION �� 10

4. ACCESSORIES INCLUDED �� 10

5. INSTALLATION INSTRUCTIONS �� 11

6. AIR CONDITIONER FEATURES �� 13

7. OPERATING INSTRUCTIONS �� 14

8. CARE & CLEANING �� 17

9. TROUBLE SHOOTING �� 17

10. ADDITIONAL INFORMATION �� 18

11. ENVIRONMENTAL CONCERNS �� 23

3ENGLISH

1. SAFETY INFORMATION

1.1 Important notes

WARNING!

•This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved�

•Children shall not play with the appliance�

•If the supply cord is damaged, it must bereplaced by

the manufacturer, its service agent or similarly qualied

persons in order to avoid a hazard�

CAUTION!

•Contact authorised service technician for repair or

maintenance of this unit�

•Contact the installer for installation of this unit�

•The air conditioner is not intended for use by young

children of inrmed persons without supervision�

•Young children should be supervised to ensure that they

do not play with the air conditioner�

•There are local council rules regarding maximum

allowable noise levels emitted by air conditioners�

•If the power cord is to be replaced, replacement work

shall be performed by authorised personnel only�

•Installation work must be performed in accordance with

the national wiring standards by authorised personnel

only(if applicable)� Incorrect connection can cause

overheating and re�

•Take care not to catch ngers on fan when adjusting

horizontal louvres�

This manual explains the proper use of your new air

conditioner� Please read this manual carefully before using the

product� This manual should be kept in a safe place for handy

reference�

1� Do not operate unit without the air lter�

2� Do not operate unit near any heat source or open re�

3� Do not expose the unit to direct sunlight�

4 www.electrolux.com

4� Always store or move the unit in an upright position�

5� Do not cover the appliance when in operation or

immediately after use�

6� Always ensure that when the water pump drain hose

is tted that the hose is run to an effective drain point�

7� Always drain condensate before storing unit�

1.2 Point to Keep in Mind When Using Your Air Conditioner

CAUTION!

Warnings for use

CAUTION!

Warning for power supply cord

•This power plug must only be plugged into an

appropriate wall socket� Do not use in conjunction with

any extension cords�

•Push the power plug securely into the socket and make

sure it is not loose�

•Do not pull, deform� or modify the power supply cord,

or immerse it in water� Pulling or misuse of the power

supply cord can result in damage to the unit and cause

electrical shock�

•If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualied

•Do not modify any part of this product�

•Do not insert anything into any part of the unit�

•Ensure the power supply used has an appropriate

voltage rating� Only use a 220V - 240V, 50Hz, 10A

mains electricity supply� Use of a power supply with an

improper voltage rating can result in damage to the unit

an possibly re�

•Always use a circuit breaker or fuse with the proper amp

rating� Do not, under any circumstances, use wire, pins

or other objects in place of a proper fuse�

•In the event of any abnormality with the air conditioner

(eg� a burning smell), turn it off immediately and

disconnect the power supply�

5ENGLISH

1.3 Usage cautions

(only for UK)

•This appliance is equipped with a cord that has a earthed

wire connected to an earthed pin� The plug must be plugged

into a socket that is properly installed and earthed� Do not

under qny circumstances ccut or remove the square earthed

pin from this plug�

•Be sure to turn the unit off and disconnect the power supply

cord before performing any maintenance or cleaning�

•Do not splash or pour water directly onto the unit�Water can

cause electrical shock or equipment damage�

•Drainage should be performed whenever moving the air

conditioner (see page 14)� If any water remains in the tank, it

may spill out while being moved�

•To ensure proper drainage, the drainage hose must have

no kinks and must not be elevated during dehumidicatioin

mode� If not, the drained water may spill out into the room�

•The temperature around the drainage hose must not be

below freezing point when used� Drained water may freeze

inside the hose, causing water inside the unit to overow into

the room�

•Do not block the exhaust air outlet with obstacles� Cooling

Plug

Grounding tab

Plug

Square earthed pin

person in order to avoid a hazard� Use only the manufacturer

specied power cord for replacement�

•This appliance must be earthed� This appliance is equipped

with a cord having an earth wire� The plug must be plugged

into an outlet that is properly installed and earthed�

6 www.electrolux.com

performance may be reduced or stop completely�

•Provide a residual current device (ROD) in order to protect

against electric shock in accordance with British Standard

and Wiring Rules�

•Exposure to direct airow for an extended period of time

could be hazardous to your health� Do not expose occupants,

pets, or plants to direct airow for extended periods of time�

•Do not use this air conditioner for non-specied special

purposes (e�g� preserving precision devices, food, pets,

plants, and art objects)� Usage in such a manner could harm

such property�

2. SAFETY INSTRUCTION

2.1 Notes on Operation

• Allow 3 minutes for the compressor

to restart cooling� If you turn the air

conditioner off and immediately restart

it, allow 3 minutes for the compressor

to restart cooling� There is an electronic

device in the unit that keeps the

compressor turned off for 3 minutes for

safety�

• In the event of a power failure during

use, allow 3 minutes before restarting

the unit� After power is reinstated,

restart the air conditioner� If the power

was off for less than three minutes,

be sure to wait at least three minutes

before restarting the unit� if you restart

the air conditioner within three minutes,

a protective device in the unit may

cause the compressor to shut off� This

protective device will prevent cooling for

about 5 minutes� Any previous setting

will be cancelled and the unit will return

to its initial setting�

• Low temperature operation: Is your

unit freezing up? Freezing may occur

when the unit is set close to 18°C in

low ambient temperature conditions,

especially at night� In these conditions, a

further temperature drop may cause the

unit to freeze� Setting the unit to a higher

temperature will prevent it from freezing�

• Dehumidication mode increases room

temperature� The unit generates heat

during dehumidication mode and the

room temperature will rise� Warm air will

be blown out from the exhaust air outlet,

but this is normal and does not indicate

a problem with the unit�

• This air conditioner blows the warm air

generated by the unit outside the room

via the exhaust hose while in cool mode�

In the mean time, the same amount

of air will enter the room from outside

through any openings of the room�

• Do not use means to accelerate the

defrosting process or to clean, other

than those recommended by the

manufacturer�

• The appliance shall be stored in a room

without continuously operating ignition

sources (for example: open ames, an

operating gas appliance or an operating

electric heater)�

• Do not pierce or burn�

• Appliance should be installed, operated

and stored in a room with a oor area

larger than 12 m

2

�

• Compliance with national gas regulations

shall be observed�

• Keep ventilation openings clear of

obstruction�

7ENGLISH

2.2 Warning during usage

• The appliance shall be stored in a well-

ventilated area where the room size

larger than 12 m

2

�

• Any person who is involved with

working on or breaking into a refrigerant

circuit should hold a current valid

certicate from an industry-accredited

assessment authority, which authorises

their competence to handle refrigerants

safely in accordance with an industry

recognised assessment specication�

• Servicing shall only be performed

as recommended by the equipment

manufacturer� Maintenance and repair

requiring the assistance of other skilled

personnel shall be carried out under the

supervision of the person competent in

the use of ammable refrigerants�

• This product contains a lithium button/

coin cell battery� If a new or used lithium

button/coin cell battery is swallowed

or enters the body, it can cause severe

internal burns and can lead to death in

as little as 2 hours� Always completely

secure the battery compartment� If

the battery compartment does not

close securely, stop using the product,

remove the batteries, and keep it away

from children� If you think batteries might

have been swallowed or placed inside

any part of the body, seek immediate

medical attention�

To prevent injury to the user or other

people and property damage, the following

instructions must be followed�

Incorrect operation due to ignoring

instructions may cause harm or damage�

The seriousness is classied by the

following indications:

This symbol indicates the possibility

of death or serious injury�

Warning during usage

This symbol indicates the possibility

of injury or damage to property�

WARNING!

CAUTION!

Meanings of symbols used in this manual

are shown below:

This symbol indicates never to do

this�

This symbol indicates always do

this�

8 www.electrolux.com

warning meaning

Plug in power plug properly Otherwise, it may cause electric shock or

re due to excess heat generation

Do not operate or stop the unit by inserting

or pulling out Die power plug

It may cause electric shock or re due to

heat generation

Do not damage or use an unspecied

power cord

It may cause electric shook or re�

If the power cord is damaged, it must

be replaced by the manufacturer or an

authorised service centre or a similarly

qualied person in order to avoid a hazard

Do not modify power cord length or share

the outlet with other appliances

It may cause electric shock or re due to

heat generation

Do not operate with wet hands or in damp

environment

It may cause electric shock

Do not allow water to run into electric

parts

It may cause failure of unit or electric

shock

Always install circuit breaker and a

dedicated power circuit

Incorrect installation may cause Are and

electric shock

Unplug the unit if strange sounds, smell, or

smoke comes from it

It may cause re and electric shock

Do not use the socket if it is loose or

damaged

It may cause re and electric shock

Do not open the unit during operation It may cause re and electric shock

Keep rearms away It may cause re

Do not use the power cord close to

heating appliances

It may cause re and electric shock

Do not use the power cord near ammable

gas or combustibles, such as gasoline,

benzene, thinner, etc�

It may cause an explosion or re

Ventilate room before operating air

conditioner if there is a gas leakage from

another appliance

It may cause explosion, re and burns

Do not disassemble or modify unit It may cause failure and electric shock

Always ensure effective earthing Incorrect earthing may cause electric

shock

Do not direct airow at room occupants This could harm your health

9ENGLISH

CAUTION!

caution meaning

When the air lter is to be removed, do not

touch the metal parts of the unit

It may cause an injury

Do not clean the air conditioner with water Water may enter the unit and degrade the

insulation� It may cause an electric shock

Ventilate the room well when used

together with a stove, etc�

An oxygen shortage may occur

When the unit is to be cleaned, switch off,

and turn off the circuit breaker

Do not clean unit when power is on as it

may cause re and electric shock, it may

cause an injury

Do not place a pet or house plant where it

will be exposed to direct air ow

This could injure the pet or plant

Do not use for special purposes Do not use this air conditioner to

preserve precision devices, food, pets,

plants, and art objects� It may cause

deterioration of quality, etc�

Stop operation and close the window in

storm or cyclone

Operation with windows opened may

cause wetting of indoor and soaking of

household furniture

Hold the plug by the head of the power

plug when taking it out

It may cause electric shock and damage

Turn off the main power switch when not

using the unit for a long time

It may cause failure of product or re

Do not place obstacles around air-inlets or

inside of air-outlet

It may cause failure of appliance or

accident

Always insert the lters securely� Clean

lter once every two weeks

Operation without lters may cause failure

Do not use strong detergent such as wax

or thinner - use a soft cloth

Appearance may be deteriorated due to

change of product colour or scratching of

its surface

Do not place heavy object on the power

cord and ensure that the cord is not

compressed

There is danger of re or electric shock

Do not drink water drained from air

conditioner

It contains contaminants and could make

you sick

Use caution when unpacking and installing Sharp edges could cause injury

If water enters the unit, turn the unit off

at the power outlet and switch off the

circuit breaker� Isolate supply by taking the

power-plug out and contact a qualied

service technician

It could cause electric shock and damage

10 www.electrolux.com

1

3

2

4

5

7

6

8

10

9

3. UNIT DESCRIPTION

• Check all the accessories are included in the package and please refer to the

installation instructions for their usage�

1

2

5

3

9

10

8

4

6

7

Room air discharge

Fig. 1

Fig. 2

Control panel

Remote control

Room air inlet

Drain outlet

Bottom tray drain outlet

Castor

Carrying handle(both sides)

Filter

Exhaust air outlet

4. ACCESSORIES INCLUDED

1

2

3

4

5

6

7

PARTS PARTS NAME: QUANTITY:

Exhaust hose

Window Sliding Kit

Drain Hose & Adaptor

3/8” Screw

Decoration lm

Fixing Strap

1 pcs

2 pcs

1 pcs

1 set

Remote Control 1 pcs

11ENGLISH

5. INSTALLATION INSTRUCTIONS

Fig. 3

5.1 Exhausting hot air

In the COOLING Mode the appliance must

be placed close to a window or opening

so that the warm exhaust air can be

ducted outside� First position unit on a at

oor and make sure there’s a minimum of

30cm clearance around the unit, and is

within the vicinity of a single circuit outlet

power source�

1. Extend either side of the hose (Fig� 3)�

3. Install the window kit on the window

and slide the adaptor B into the window

slider kit and seal� (Fig� 5 & 6)

2. Slide the adaptor A into the exchange

hole of the unit as shown on Fig� 4�

Fig. 4

Fig. 5

Fig. 6

Window Slider Kit

Minimum: 56cm

Maxmum: 112cm

Refer to " 5.2 Installation in a

casement window" about how to

install the window kit�

The hose can be extended from

its original length of 38cm up to

150cm, but it is the best to keep

the length to minimum required�

Also make sure that the hose does

not have any sharp bends or sags�

(Fig� 7)

Fig. 7

5.2 Installation in a casement

window

Fig. 9

B

1. Open the window sash and lift the

locking lever of the window slider kit (Fig�

9)

B: Locking lever

12 www.electrolux.com

C: Decoration lm

Fig. 10

Fig. 11 A

Fig. 11 B

Fig. 11 C

Fig. 12

Fig. 13

C

2. Place the window slider kit on the

window� Adjust the length of the window

slider kit according to the height of

window (Fig� 10)�

4. Cut the decoration lm to an appropriate

length and stick on the extend rod(Fig�

13)�

3. Press back the locking lever to x the

length of the window slider kit, then

close the window and pinch the window

kit between the window and the window

frame, to secure the window kit, peel off

the protect lm in the back of the tabs

of the anchor and attach on the window

frame, then fasten the strap(Fig� 12)�

The telescopic rod can be extended,

if the window is too high�

To do that, rst take out the

telescopic rod completely(Fig�11

A)� Then align the 3 hooks on the

extending rod(sold separately)

to the 3 slots on the end of the

telescopic rod and slide the 3

hooks into the slots, then press

down the extending rod to lock the

slots(Fig�11 B)� After that slide the

combined telescopic rod back into

the window kit(Fig�11C)�

13ENGLISH

Fig. 20

Fig. 21

1. Turn over the remote control� In the

button of the remote control there is a

slot�

2. Use a coin or something like that to

rotate the back cover anti-clockwise to

open it�(Fig�20 & 21)

3. Use the same way to open the

protecting cover inside and take out the

battery�(Fig�22)

6. AIR CONDITIONER FEATURES

6.1 CONTROL PANEL

6.2 Remote Control

1

234567

1 4

2

7

6

3

5

Displays temperature Increase temperature

Filter reset button (hold 3 secs to reset)

Turns unit on or off

Sets fan speed

Decrease temperature

Sets mode

Press to turn on or off unit

Press to select fan speeds

Press to increase temperature setting

Press to decrease temperature setting

Press to select modes

2

4

3

5

1

2

3

4

5

Open the back covers and remove

the protecting lm to activate the

remote control, when use for the

rst time�

To replace the battery

14 www.electrolux.com

7. OPERATING INSTRUCTIONS

Battery Type: RG15D/E-ELL (Rated

Voltage:3VDC)

WARNING!

Please use the battery

appropriately

4. Replace the battery and reinstall the

inside cover and back cover�

Fig. 22

1.

Chemical Burn Hazard� Keep batteries

away from children�

2.

Be sure the batteries are inserted

properly�

3.

Do not use batteries other than the

type specied�

4.

Do not use old batteries with new

ones �

5.

Do not dispose of batteries in re�

Batteries may explode or leak�

6.

The cells shall be disposed of

properly, including keeping them away

from children and even used cells may

cause injury�

7.

To prevent damage, remove the

batteries when not being used for a

long time�

8.

This device complies with Part 15 of

the FCC Rules� Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation�

Some of the following instructions

can only be used by using the

Control Panel�

It is not necessary to use the

drainage hose in the "cool" mode�

Cooling mode

Fan mode

Heating mode (on some models)

In this mode the exhaust adaptor hose

MUST be used�

In this mode there is no need to use the

exhaust hose or drainage hose�

In this mode the exhaust adaptor hose

MUST be used�

7.1 Usage of the Control Panel

1. Press the "Modes" button until the

"Cool" indicator lights�

2. Press the " - " & " + " Temp buttons for

desired setting�

3. Press the "Fan speed" button for

desired fan speed�

1. Press the "Modes" button until the "Fan"

indicator is lit�

2. Press the "Fan speed" button to choose

the desired fan speed�

3. The fan will run at the selected speed

and the display will show the room

temperature�

1. Press the "Modes" button until the

"Heat" indicator is lit�

2. Press the " - " & " + " Temp buttons for

desired setting�

3. Press the "fan speed" button for desired

fan speed�

4. Connected drain hose� See 7�3

Drainage section�

15ENGLISH

After choosing the fan speed as

"Auto Fan", "High", "Mid" or "Low",

the corresponding fan speed

indicator light will illuminate�

Under Auto and Dry mode, you can

not select the fan speed�

Dry mode

Selecting fan speed

Check lter feature

Auto mode

Always have the exhaust hose attached in

this mode�

When you set the air conditioner in Auto

mode, it will automatically select cooling,

heating (inapplicable for cooling only

models), or fan only operation depending

on what temperature you have selected

and the room temperature� The air

conditioner will control room temperature

automatically round the temperature point

set by you�

Under AUTO mode, you can not select the

fan speed�

1� Press the "Modes" button until the

"Auto mode" indicator lights�

After the "Auto mode" is selected the unit

will run automatically according to the

actual room air temperature�

In this mode you do not need to use the

exhaust adaptor hose, BUT the water

collected must be discharged� See 7�3

Drainage Section�

If the display reads "A5" , the room

temperature sensor has failed� Contact

your Authorized Electrolux Service Centre�

If the display reads "E5" , the evaporator

temperature sensor has failed� Contact

your Authorized Electrolux Service Centre�

If the display reads "E7", the indoor

motor has failed� Contact your Authorized

Frigidaire Service Center�

If the display reads "E4" , the display panel

communication has failed� Contact your

Authorized Electrolux Service Centre�

If the display reads "P1" , bottom tray

is full� Carefully move the unit to a drain

location, remove the bottom drain plug

and let the water drain away� Restart the

machine until the "P1" symbol disappears�

If error repeats, call for service�

You can select the desired fan speed, by

pressing the "Fan speed" button� The fan

speed will change in the sequence: "Auto

Fan", "High", "Mid", "Low"�

7.2 Fault code

1. Press the "Modes" button until the "Dry"

indicator is lit�

2. The fan will run at low speed and the

display will show the room temperature�

3. Keep doors & windows closed for best

effect�

4. Connected drain hose� See Drainage

section�

1. Cleaning the lter�

2. Press and hold the "lter" button for 3

seconds to turn off the lter indicator�

16 www.electrolux.com

Fig. 23

Fig. 24

Connect a 8-9mm hose here

to extend the draining hose

During the Heat and dry mode, you need

to connect the drain hose to the drain

outlet in the back of the unit to drain the

condensate from the unit� Otherwise, the

unit may not function normally and display

show “P1”�

A� Discharge into a drain that is lower than

the unit�

B� The unit have a pump to drain the

condensate�

During cooling mode, please replace the

rubber stopper to the hose connector to

reach the maximum performance�

If necessary you can extend the drain hose

by adapting the drain hose adpator in the

end of the drain hose, then use a 8-9mm

hose to extend�(Fig� 24)

Now that you have mastered the operating

procedure, here are more features in your

control that you should become familiar

with�

7.3 Drainage 7.4 Operation Tips

• The "Cool" circuit has an automatic 3

minutes time delayed start if the unit is

turned off and on quickly� This prevents

overheating of the compressor and

possible circuit breaker tripping� The fan

will continue to run during this time�

• Temperature can be set between 16 °C

and 32 °C�

• The control is capable of displaying

temperature in degrees Fahrenheit or

degrees Celsius� To convert from one to

the other and back, press and hold the

"TEMP" Up ( + ) and Down ( - ) buttons

together for 3 seconds�

• There is a 2-Second delay for the

compressor shutting down when

selecting Fan� This is to cover the

possibility of having to roll through to

select another mode�

• After a power outage, the unit will

memorize the last setting and return the

unit to the same setting once power is

restored�

• Indoor operating temperature range for

this product is 16 °C to 35 °C�

• During normal operation, the unit's

display will show room temperature

but when the room temperature is over

37°C the display will show "HI"�

• After 60 seconds of control inactivity the

display and indicator lights will turn off�

Press any button on the control panel

or remote control and the display will

resume�

17ENGLISH

8. CARE & CLEANING

Clean your air conditioner regularly to keep

it looking new�

Be sure to unplug the unit before cleaning

to prevent shock or re hazards�

Enter the context of your task here

(optional)�

Be sure to unplug the air conditioner to

8.1 Air lter cleaning

8.2 Cabinet Cleaning

1. Grasp the lters tab and pull off the 4

lters on the back of the unit one by

one�

2. Wash the lter using liquid dishwashing

detergent and warm water� Rinse lter

thoroughly� Gently shake excess water

from the lter� Or, instead of washing

you may vacuum the lter clean�

3. Put back the lter after the lter is dry�

Be sure lter is thoroughly dry

before replacing�

If you plan to store the appliance during

the winter, cover it with plastic or return it

to its carton box�

8.3 Winter Storage

• Never use harsh cleaners, wax or polish

on the cabinet front�

• Be sure to wring excess water from

the cloth before wiping around the

controls� Excess water in or around the

controls may cause damage to the air

conditioner�

Caution when cleaning the unit�

prevent shock or re hazard�

The cabinet and front may be dusted with

an oil-free cloth or washed with a cloth

dampened in a solution of warm water and

mild liquid dishwashing detergent� Rinse

thoroughly and wipe dry�

9. TROUBLE SHOOTING

Before calling for service, review this list� It

may save you time and expense� This list

includes common occurrences that are

not the result of defective workmanship or

materials in this appliance�

Air conditioner will not operate.

Air from unit does not feel cold

enough.

Air conditioner cooling, but room is

too warm - NO ice forming on cooling

coil behind decorative front.

• Wall plug disconnected� Push plug rmly

into wall outlet�

• House fuse blown or circuit breaker

tripped� Replace fuse with time delay

type or reset circuit breaker�

• Control is OFF� Turn Control ON and set

to desired setting�

• P1 appears in the display window� Drain

water as described in 7�3 Drainage

Section �

• Room Temperature lower than the set

temperature (Cool Mode)� Reset the

temperature�

• Room temperature below 16 °C�

Cooling may not occur until room

temperature rises above 16 °C�

• Reset to a lower temperature�

• Compressor shut-off by changing

modes� Wait approximately 3 minutes

and listen for compressor to restart

when set in the COOL mode�

• Outdoor temperature below 16 °C� To

defrost the coil, set Fan mode�

• Air lter may be dirty� Clean lter� Refer

to 8� Care and Cleaning section� To

defrost, set to Fan mode�

• Temperature is set too low for nighttime

cooling� To defrost the coil, set to Fan

18 www.electrolux.com

• Dirty air lter - air restricted� Clean air

lter�

• Outside temperature extremely hot� Set

FAN speed to a faster setting to bring air

through cooling coils more frequently�

Room too cold.

• Set temperature too low� Increase set

temperature�

10. ADDITIONAL INFORMATION

Transport of equipment containing

ammable refrigerants

Disposal of equipment using

ammable refrigerants

Marking of equipment using signs

Storage of equipment/appliances

Storage of packed (unsold) equipment

Information on servicing

See transport regulations

See national regulations�

See local regulations

The storage of equipment should be

in accordance with the manufacturer’s

instructions�

Storage package protection should be

constructed such that mechanical damage

to the equipment inside the package will

not cause a leak of the refrigerant charge�

The maximum number of pieces of

equipment permitted to be stored together

will be determined by local regulations�

1. Checks to the area� Prior to beginning

work on systems containing ammable

refrigerants, safety checks are necessary

to ensure that the risk of ignition is

minimised� For repair to the refrigerating

system, the following precautions shall

be complied with prior to conducting

work on the system�

2. Work procedure� Work shall be

undertaken under a controlled

procedure so as to minimise the risk of a

ammable gas or vapour being present

while the work is being performed�

3. General work area� All maintenance

staff and others working in the local

area shall be instructed on the nature

of work being carried out� Work in

conned spaces shall be avoided� The

area around the workspace shall be

sectioned off� Ensure that the conditions

within the area have been made safe by

control of ammable material�

4. Checking for presence of refrigerant�

The area shall be checked with an

appropriate refrigerant detector prior

to and during work, to ensure the

technician is aware of potentially

ammable atmospheres� Ensure that

mode� Then, set temperature to a higher

setting�

• Exhaust duct not connected or blocked�

See 5�1 Exhausting hot air Section�

Air conditioner cooling, but room is

too warm - ice forming on cooling coil

behind decorative front

Air conditioner turns on and off

rapidly.

• Dirty air lter - air restricted� Clean air

lter� Refer to 8� Care and Cleaning

section�

• Temperature is set too high� Set

temperature to a lower setting�

• Air directional louvers positioned

improperly� Position louvers for better air

distribution�

• Front of unit is blocked by drapes,

blinds, furniture, etc� - restricts air

distribution� Clear blockage in front of

unit�

• Doors, windows, registers, etc� open -

cool air escapes� Close doors, windows,

registers, etc�

• Unit recently turned on in hot room�

Allow additional time to remove “stored

heat” from walls, ceiling, oor and

furniture�

19ENGLISH

the leak detection equipment being

used is suitable for use with ammable

refrigerants, i�e� nonsparking, adequately

sealed or intrinsically safe�

5. Presence of re extinguisher� If any

hot work is to be conducted on

the refrigeration equipment or any

associated parts, appropriate re

extinguishing equipment shall be

available to hand� Have a dry powder

or CO2 re extinguisher adjacent to the

charging area�

6. No ignition sources� No person carrying

out work in relation to a refrigeration

system which involves exposing

any pipe work that contains or has

contained ammable refrigerant shall

use any sources of ignition in such a

manner that it may lead to the risk of

re or explosion� All possible ignition

sources, including cigarette smoking,

should be kept sufciently far away

from the site of installation, repairing,

removing and disposal, during which

ammable refrigerant can possibly be

released to the surrounding space� Prior

to work taking place, the area around

the equipment is to be surveyed to

make sure that there are no ammable

hazards or ignition risks� “No Smoking”

signs shall be displayed�

7. Ventilated area� Ensure that the area

is in the open or that it is adequately

ventilated before breaking into the

system or conducting any hot work�

A degree of ventilation shall continue

during the period that the work is

carried out� The ventilation should safely

disperse any released refrigerant and

preferably expel it externally into the

atmosphere�

8. Checks to the refrigeration equipment�

Where electrical components are

being changed, they shall be t for the

purpose and to the correct specication�

At all times the manufacturer’s

maintenance and service guidelines

shall be followed� If in doubt consult the

manufacturer’s technical department

for assistance� The following checks

shall be applied to installations using

ammable refrigerants:

– The charge size is in accordance

with the room size within which the

refrigerant containing parts are installed;

– The ventilation machinery and outlets

are operating adequately and are not

obstructed;

– If an indirect refrigerating circuit is being

used, the secondary circuit shall be

checked for the presence of refrigerant;

– Marking to the equipment continues

to be visible and legible� Markings and

signs that are illegible shall be corrected;

– Refrigeration pipe or components are

installed in a position where theyare

unlikely to be exposed to any substance

which may corrode refrigerant containing

components, unless the components

are constructed of materials which are

inherently resistant to being corroded or

are suitably protected against being so

corroded�

9. Checks to electrical devices� Repair and

maintenance to electrical components

shall include initial safety checks and

component inspection procedures� If

a fault exists that could compromise

safety, then no electrical supply shall

be connected to the circuit until it is

satisfactorily dealt with� If the fault

cannot be corrected immediately but

it is necessary to continue operation,

an adequate temporary solution shall

be used� This shall be reported to the

owner of the equipment so all parties

are advised�

Initial safety checks shall include:

• That capacitors are discharged: this

shall be done in a safe manner to avoid

possibility of sparking;

• That there no live electrical components

and wiring are exposed while charging,

recovering or purging the system;

• That there is continuity of earth bonding�

Repairs to sealed components

1. During repairs to sealed components, all

electrical supplies shall be disconnected

from the equipment being worked upon

prior to any removal of sealed covers,

etc� If it is absolutely necessary to have

an electrical supply to equipment during

20 www.electrolux.com

Repair to intrinsically safe

components

NOTE: The use of silicon sealant may

inhibit the effectiveness of some types of

leak detection equipment� Intrinsically safe

components do not have to be isolated

prior to working on them�

Do not apply any permanent inductive or

capacitance loads to the circuit without

ensuring that this will not exceed the

permissible voltage and current permitted

for the equipment in use�

Intrinsically safe components are the only

types that can be worked on while live in

the presence of a ammable atmosphere�

The test apparatus shall be at the correct

rating� Replace components only with

parts specied by the manufacturer� Other

parts may result in the ignition of refrigerant

in the atmosphere from a leak�

Check that cabling will not be subject

to wear, corrosion, excessive pressure,

vibration, sharp edges or any other

adverse environmental effects� The check

shall also take into account the effects of

aging or continual vibration from sources

such as compressors or fans�

When breaking into the refrigerant circuit

to make repairs – or for any other purpose

– conventional procedures shall be

used� However, it is important that best

practice is followed since ammability is

a consideration� The following procedure

shall be adhered to:

• Remove refrigerant;

• Purge the circuit with inert gas;

• Evacuate;

Under no circumstances shall potential

sources of ignition be used in the

searching for or detection of refrigerant

leaks� A halide torch (or any other detector

using a naked ame) shall not be used�

The following leak detection methods are

deemed acceptable for systems containing

ammable refrigerants�

Electronic leak detectors shall be used

to detect ammable refrigerants, but the

sensitivity may not be adequate, or may

need re-calibration� (Detection equipment

shall be calibrated in a refrigerant-free

area�) Ensure that the detector is not a

potential source of ignition and is suitable

for the refrigerant used� Leak detection

equipment shall be set at a percentage

of the LFL of the refrigerant and shall be

calibrated to the refrigerant employed and

the appropriate percentage of gas (25 %

maximum) is conrmed�

Leak detection uids are suitable for use

with most refrigerants but the use of

detergents containing chlorine shall be

avoided as the chlorine may react with the

refrigerant and corrode the copper pipe-

work�

If a leak is suspected, all naked ames

shall be removed/ extinguished�

If a leakage of refrigerant is found which

requires brazing, all of the refrigerant shall

be recovered from the system, or isolated

(by means of shut off valves) in a part of

the system remote from the leak� Oxygen

free nitrogen (OFN) shall then be purged

through the system both before and during

the brazing process�

Cabling

Removal and evacuation

Detection of ammable refrigerants

Leak detection methods

servicing, then a permanently operating

form of leak detection shall be located

at the most critical point to warn of a

potentially hazardous situation�

2. Particular attention shall be paid to the

following to ensure that by working on

electrical components, the casing is not

altered in such a way that the level of

protection is affected� This shall include

damage to cables, excessive number

of connections, terminals not made to

original specication, damage to seals,

incorrect tting of glands, etc� Ensure

that apparatus is mounted securely�

Ensure that seals or sealing materials

have not degraded such that they no

longer serve the purpose of preventing

the ingress of ammable atmospheres�

Replacement parts shall be in

accordance with the manufacturer’s

specications�

Stránka sa načítava ...

Electrolux EXP09HSECI Používateľská príručka

Táto príručka je tiež vhodná pre

Electrolux EXP09HSECI Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty