Panasonic SCXH10EP Návod na používanie

Značka: Panasonic

Model: SCXH10EP

Kategória: DVD prehrávače

Typ: Návod na používanie

[EP]

RQTX1309-1Z

Operating Instructions

Návod k obsluze

Instrukcja obsługi

Használati útmutató

DVD Home Theater Sound System

Systém zvuku domácího kina s DVD pâehrávaçem

Zestaw kina domowego z odtwarzaczem DVD

DVD házimozi hangrendszer

Model No. / Model č. / Nr Modelu / Típusszám SC-XH10

until

2011/05/07

Dear customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read

the instructions completely.

Please keep this manual for future reference.

The illustrations shown may differ from your unit.

Vážený zákazníku

Děkujeme za zakoupení tohoto výrobku. Pro dosažení optimálního

výkonu a z bezpečnostních důvodu si pečlivě přečtěte tyto pokyny.

Před zapojením, obsluhou nebo nastavením tohoto výrobku si

přečtěte celý tento návod.

Návod uschovejte k pozdějšímu použití.

Uvedené ilustrace se mohou od vašeho přístroje lišit.

Szanowny Nabywco

Dziękujemy za zakupienie tego produktu. Aby zapewnić optymalną pracę

urządzenia i jego bezpieczną obsługę, należy dokładnie przeczytać

niniejszą instrukcję.

Przed podłączeniem, użytkowaniem lub regulacją produktu należy

przeczytać całą instrukcję obsługi.

Należy zachować tę instrukcję obsługi na przyszłość.

Urzdązenie pokazane na ilustracjach może się różnić od

zakupionego urządzenia.

Tisztelt Vásárló!

Köszönjük, hogy termékünket választotta. A biztonság és a készülék

optimális teljesítménye érdekében kérjük, hogy figyelmesen olvassa el a

használati útmutatót!

A készülék csatlakoztatása, üzembe helyezése és beállítása előtt

kérjük, figyelmesen olvassa végig a használati útmutatót.

Kérjük, őrizze meg ezt az útmutatót.

Az útmutatóban látható ábrák eltérhetnek az Ön készülékétől.

Region number/Číslo regionu/Numer regionu/Régiókód

The player plays DVD-Video marked with labels containing the

region number “2” or “ALL”.

Přehrávač přehrává disky DVD-Video označené štítky s číslem

regionu “2” nebo “ALL”.

Odtwarzacz obsługuje płyty DVD-Video z numerami regionów “2” lub

“ALL”.

A DVD lejátszó a megfelelő régiókóddal “2” vagy “ALL” jelzéssel

jelölt DVD-Video lemezeket játssza le.

Example/Příklad/Przykład/Például:

2 ALL

The illustration shows SC-PT70.

Obrázek představuje model SC-PT70.

Na rysunku przedstawiono model SC-PT70.

SC-XH10 EP_RQTX1309-Z_eng.book Page 1 Friday, March 18, 2011 3:01 PM

RQTX1309

System/Systém/Zestaw/Rendszer SC-XH10

Main unit/Hlavní jednotka/Główne urządzenie/Készülék SA-XH10

Speaker system/Reproduktorový

systém/System głośników/

Hangszóró rendszer

Front speakers/Čelní reproduktory/Głośniki przednie/

Első hangsugárzók

SB-HF70

Center speaker/Centrální reproduktor/Głośnik centralny/Középső

hangsugárzó

SB-HC70

Surround speakers/Prostorové reproduktory/Głośniki dźwięku

przestrzennego/Háttér hangsugárzók

SB-HS70

Subwoofer/Subwoofer/Głośnik niskotonowy/Mélysugárzó SB-HW50

Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if

the controls are the same.

Popis obsluhy v tomto návodu se týká především dálkového ovladače, avšak obsluhu lze provádět také pomocí ovládacích prvků

hlavní jednotky – jestliže jsou stejné jako na ovladači.

W instrukcji obsługi opisano głównie czynności wykonywane z poziomu pilota, można je jednak wykonać z poziomu urządzenia

głównego, jeżeli znajdujące się tam przyciski są takie same.

A használati útmutatóban ismertetett műveletek főleg a távvezérlő használatára vonatkoznak, de ezeket a műveleteket a készülék

kezelőszerveivel ugyanúgy elvégezheti.

Accessories/Příslušenství/Akcesoria/Tartozékok

Please check and identify the supplied accessories.

Zkontrolujte a odlište dodané příslušenství.

Sprawdź załączone akcesoria.

Kérjük, ellenőrizze és azonosítsa a mellékelt tartozékokat.

∏ 1 Remote control/Dálkový ovladač/Pilot/Távvezérlő

(N2QAYB000627)

∏ 2 Remote control batteries/Baterie dálkového ovladače/Baterie pilota/Elem a távvezérlőhöz

∏ 1 FM indoor antenna/Pokojová anténa FM/Wewnętrzna antena FM/URH szobaantenna

∏ 1 AC mains lead/Sít’ový kabel/Przewód zasilania/Hálózati csatlakozókábel

∏ 2 Sheets of speaker cable stickers/Listy štítků pro kabely reproduktorů/Arkusze etykietek na przewody głośników/

Hangszóró kábel matrica táblák

∏ Speaker cables/Kabely reproduktorů/Kabel głośnikowe/Rövid kábel (középcsatorna hangsugárzóhoz)

≥ 3 short cables/krátký kabely/krótki kable/rövid kábelek

≥ 2 long cables/dlouhé kabely/długie kable/hosszú kábelek

(Inside of product)

(Uvnitř přehrávače)

(Wewnątrz

urządzenia)

(A készülék

belsejében)

SC-XH10 EP_RQTX1309-Z_eng.book Page 2 Friday, March 4, 2011 5:55 PM

RQTX1309



The circled numbers indicated in the operating instructions (e.g. Press [Í]1) correspond to the circled numbers in the above.

Zakroužkovaná čísla uvedená v návodu k obsluze (např. Stiskněte [Í]1) odpovídají zakroužkovaným číslům viz výše.

Zakreślone cyfry zaznaczone w instrukcji obsługi (np. Wciśnij [Í]1) odnoszą się do zakreślonych cyfr w tejże instrukcji.

A használati utasításban feltüntetett bekarikázott számok (pl. Nyomja meg az [Í]1 gombot) a fenti bekarikázott számoknak felelnek meg.

RETURN

VOL

STOP

VOL

INPUT

SKIP

SLOW

PAUSE

PLAY

DVD

RADIO

EXT-IN

EXIT

–REPEAT

PLAY MODE

–CH SELECT

SOUND

SURROUND W.SRD FL DISPLAY

1 2 3

4 5 6

7 8

CANCEL

FUNCTIONS

MUTE

SKIP

–SLEEP













































MUSIC PORT

1-MIC-2

VOL









 

SC-XH10 EP_RQTX1309-Z_eng.book Page 3 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Other Panasonic audio/video equipment may start functioning when you

operate the unit using the supplied remote control.

You can operate this unit in another mode by setting the remote control

operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press [EXT-IN]4 to select “AUX”.

2 Press and hold [< OPEN/CLOSE]2 on the main unit and [2] on the

remote control until the main unit’s display shows “REMOTE 2”.

3 Press and hold [OK]8 and [2] on the remote control for at least

2 seconds.

To change the mode back to “REMOTE 1”, repeat the steps above by

replacing [2] with [1].

Control reference guide

Remote control

1 Turn the main unit on/off (B 8)

2 Select channels and title numbers etc. / Enter numbers

(B 9, 11)

3 Cancel (B 12)

4 Source select

[DVD]: Select disc as the source (B 11)

[RADIO]: Select FM tuner (B 9)

[EXT-IN]: Select external audio as the source (B 9)

AV # AUX # D-IN # USB

^-----------------------------------------------}

5 Basic operations for play (B 11)

6 Show on-screen menu (B 13)

7 Show a disc top menu (B 12)

8 Select or confirm menu items / Frame-by-frame (B 11)

9 Select the play mode / Set the repeat mode

(B 12, 13)

: Select sound mode / Select speaker channel (B 11)

; Select surround sound effects (B 10)

Set the Sleep timer

Press and hold [jSLEEP].

While the time is shown on the main unit’s display, press

[jSLEEP] repeatedly.

Each time you press the button:

SLEEP 30 # SLEEP 60 # SLEEP 90 # SLEEP120

^-------------------------- OFF (Cancel) (------------------------}

≥ To confirm the remaining time, press and hold the button again.

< TV operations

Aim the remote control at the Panasonic TV and press the

button.

[TV, Í]: Turn the TV on/off

[INPUT, AV]: Change the TV’s video input mode

[r, VOL, s]: Adjust the TV volume

This may not work properly with some models.

= Adjust the volume of the main unit

> Mute the sound

≥ “MUTE” flashes on the main unit’s display while the function is on.

≥ To cancel, press the button again or adjust the volume.

≥ Muting is cancelled when you switch the unit to standby.

? Select radio stations manually (B 9)

@ Select preset radio stations (B 9)

A Exit the display

B Show START menu (B 9)

C Show a disc menu (B 12)

D Return to previous screen (B 12)

E Switch information on the main unit’s display (B 12)

F Turn Whisper-mode Surround on/off (B 11)

Avoiding interference with other Panasonic equipment

Main unit

1 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice

versa. In standby mode, the unit is still consuming a small

amount of power.

2 Open/Close the disc tray (B 11)

3 Disc tray

4 Remote control signal sensor

5 Display (FL display)

6 Connect USB device (B 14)

7 Adjust the volume of the main unit

POWER-SAVING FEATURES

The main unit is designed to conserve its power

consumption and save energy.

∫ Auto power-down function

The main unit will automatically switch to standby mode after

30 minutes of inactivity.

e.g.

– There is no audio signal from an external device.

– Media playback is stopped/paused.

– The disc menu is displayed and play is not selected.

(This function may not work depending on the application

type of discs.)

SC-XH10 EP_RQTX1309-Z_eng.book Page 4 Friday, March 4, 2011 5:55 PM

Getting StartedPlaying DiscsOther OperationReference

RQTX1309

ENGLISH

TABLE OF CONTENTS

Getting Started

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4

Quick Start Guide

step 1 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

step 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Speaker connections. . . . . . . . . . . . . . . . . . . . . .6

Radio antenna connections. . . . . . . . . . . . . . . . .7

Audio and video connections . . . . . . . . . . . . . . .7

step 3 AC mains lead connection. . . . . . . . . . . . . . . 7

step 4 Preparing the remote control . . . . . . . . . . . . 8

step 5 Easy setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Listening to the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Presetting stations automatically . . . . . . . . . . . . . . . . . . . . . 9

Listening/confirming the preset channels . . . . . . . . . . . . . . . 9

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the START menu . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Selecting the source using the remote control . . . . . . . . . . . 9

Auto AUX Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Listening to the TV or other device’s audio from this

unit’s speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Playing Discs

Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Playing from the selected item. . . . . . . . . . . . . . . . . . . . 12

Other modes of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Program and Random play . . . . . . . . . . . . . . . . . . . . . . . . 12

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 13

Other Operation

Playing from an USB device. . . . . . . . . . . . . . . . . . . . . . 14

Reference

Changing the player settings . . . . . . . . . . . . . . . . . . . . . 14

DivX information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . 16

Media that can be played . . . . . . . . . . . . . . . . . . . . . . . . 16

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

POWER-SAVING FEATURES. . . . . . . . . . . . . . . . . . . . .4

Enjoying sound effects from all speakers

Enjoying surround sound effects. . . . . . . . . . . . . . . .10

Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . .11

Whisper-mode Surround. . . . . . . . . . . . . . . . . . . . . . .11

Adjusting the speaker level during playback . . . . . .11

Adjusting the speaker balance during playback . . .11

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

CAUTION!

≥ DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS

WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND

SIMILAR ITEMS.

≥ DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please

increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily

accessible.

The mains plug of the power supply cord shall remain readily

operable.

To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from AC receptacle.

SC-XH10 EP_RQTX1309-Z_eng.book Page 5 Friday, March 4, 2011 5:55 PM

RQTX1309

ENGLISH

How you set up your speakers can affect the bass and the sound field.

Note the following points:

≥ Place speakers on flat secure bases.

≥ Keep your speakers at least 10 mm away from the system for proper

ventilation.

≥ Placing speakers too close to floors, walls, and corners can result in

excessive bass. Cover walls and windows with thick curtains.

≥ For optional wall mount, refer to page 17.

Setup example (“Surround layout (Recommended)”: Standard

surround placement)

Place the front, center, and surround speakers at approximately the same

distance from the seating position. The angles in the diagram are

approximate.

§1 Position with at least 5 cm of space on all sides for proper ventilation.

§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt

the picture if it is placed directly on the TV.

§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that

it will not cause vibration. Leave about 30 cm from the TV.

Depending on the room layout, you may like to use all the speakers at the

front (“Front layout (Alternative)”) (B 8, Easy setup).

Notes on speaker use

≥Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be

negatively affected.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound.

– When the speakers are reverberating due to a record player, noise

from FM broadcasts, or continuous signals from an oscillator, test

disc, or electronic instrument.

– When adjusting the sound quality.

– When turning the unit on or off.

If irregular colouring occurs on your TV

The center speaker is designed to be used close to a TV, but the picture

may be affected on some TVs and setup combinations.

If this occurs, turn the TV off for about 30 minutes.

The demagnetising function of the TV should correct the problem. If it

persists, move the speakers further away from the TV.

Caution

Do not touch the front netted area of the speakers. Hold by the sides.

Turn off all equipment before connection and read the appropriate

operating instructions.

Do not connect the AC mains lead until all other

connections are completed.

step 1 Positioning

Caution

≥ The main unit and supplied speakers are to be used only as

indicated in this setup. Failure to do so may lead to damage to

the amplifier and/or the speakers, and may result in the risk of

fire. Consult a qualified service person if damage has occurred

or if you experience a sudden change in performance.

≥ Do not attempt to attach these speakers to walls using methods

other than those described in this manual.

120°

60°

Center speaker

§2

Front speaker

(left)

Subwoofer

§3

Surround

speaker (left)

Surround

speaker (right)

Front speaker

(right)

Main unit

§1

step 2 Connections

Speaker connections

Cable type Speakers

(Attached to

subwoofer)

Subwoofer 6

SUBWOOFER /

ENCEINTE

D’EXTRÊMES-

GRAVES

Short

Center speaker 5 CENTER / CENTRE

Front speaker (R) 2

FRONT /

AVANT

Front speaker (L) 1

Long

Surround speaker (R)

SURROUND /

AMBIOPHONIE

Surround speaker (L) 3

Verify the type of speaker with the

label on the speaker before connecting

the appropriate cable.

 

FRONT

Lch

FRONT

Lch



Use of the speaker cable stickers is convenient when making cable

connections.

e.g., Front speaker (L)

Speaker cable

stickers

Short cable



e.g.

FRONT

SURROUND



SUBWOOFER

CENTER

Main unit (rear)

White

Blue

line

White

Blue line

Push!

Surround

speaker (L)

Push!

Connect the speaker cables to the appropriate speakers by referring to

the above table.

Insert the wire fully, taking care not to insert beyond the wire insulation.

Be careful not to cross (short circuit) or reverse the polarity of the

speaker wires as doing so may damage the speakers.

i: White

j: Blue line

SC-XH10 EP_RQTX1309-Z_eng.book Page 6 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting Started

Quick Start Guide

ENGLISH

≥ To listen to the TV audio on the sound system, connect the SCART

cable, optical digital audio cable or audio cable.

Refer to the operating instructions of the respective devices for the

settings necessary to output the audio.

Basic setup example

To improve picture quality, you can change the video signal output from

the SCART (AV) terminal to suit the type of TV you are using.

≥ Select “S-Video”, “RGB 1” or “RGB 2” from “Video Out-SCART” in Video

menu (B 14).



Do not make the video connection through the VCR.

Due to copy guard protection, the picture may not be displayed properly.

[\\\\\\DIGITAL\AUDIO\IN\OPTICAL\\\\\\]

When the optical digital audio cable is connected, this unit can decode

Dolby Digital audio.

Connect the optical digital audio cable (not supplied) from the

DIGITAL AUDIO IN OPTICAL terminal on the main unit to the

OPTICAL OUT terminal on your TV.



After connecting with the optical digital audio cable, make settings to suit

the type of audio from your digital equipment (B 10).

[\\\\\\\\\AUX\\\\\\\\]

Use this connection when the TV does not have an OPTICAL OUT

terminal or when the DIGITAL AUDIO IN OPTICAL terminal on this unit is

being used by the STB.

Connect the audio cable (not supplied) from the AUX terminal on the

main unit to the AUDIO OUT terminal on your TV.



If you have various sound sources (such as Blu-ray Disc player, DVD recorder,

VCR, etc.), connect them to the available inputs on the TV and the TV output

should then be connected to the SCART (AV), AUX or DIGITAL AUDIO IN

OPTICAL terminal of the main unit.

Conserving power

The main unit consumes a small amount of power, even when it is in

standby mode (approx. 0.8 W). To save power when the unit is not to be

used for a long time, unplug it from the household mains socket.

You will need to reset some memory items when plugging back the main

unit.



The supplied AC mains lead is for use with the main unit only.

Do not use it with other equipment. Also, do not use cords for other equipment

with the main unit.

This unit will memorize the playback position when there is a power

failure.

After the power supply recovers, turn on your TV and the main unit.

Playback will resume from the point at which it was stopped.



≥ The resume playback timing may vary a few seconds.

≥ This function may not work for files that do not have resume playback.

≥ The position is cleared if the disc tray is opened or the USB device is

removed.

Radio antenna connections

Using an indoor antenna

Using an outdoor antenna

Audio and video connections

§ This connection will also enable you to play TV audio through your

home theater system (B 9, Selecting the source using the remote

control). Select the appropriate audio out (e.g. Monitor) on the TV.

FM ANT

(75 )

Adhesive tape

Main unit

(rear)

FM indoor antenna

(supplied)

Affix this end of the antenna

where reception is best.

FM ANT

(75 )

Use outdoor antenna if radio reception is poor.

≥ Disconnect the antenna when the unit is not in use.

≥ Do not use the outdoor antenna during an electrical storm.

Main unit

(rear)

75 ≠ coaxial

cable

(not supplied)

FM outdoor antenna

(Using a TV antenna

(not supplied))

The antenna should be

installed by a competent

technician.

SCART cable

(not supplied)

Main unit (rear)

Other audio connections

step 3 AC mains lead connection

Power failure resume

AC IN

Main unit (rear)

AC mains lead

(supplied)

To household mains socket

SC-XH10 EP_RQTX1309-Z_eng.book Page 7 Friday, March 4, 2011 5:55 PM

RQTX1309

ENGLISH

Do not:

≥ mix old and new batteries.

≥ use different types of batteries at the same time.

≥ take apart or short circuit.

≥ attempt to recharge alkaline or manganese batteries.

≥ use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a

long period of time. Store in a cool, dark place.

Aim at the remote control signal sensor (B 4), avoiding obstacles.

Distance: Within approx. 7 m

Angle: Within approx. 20° up and down, approx. 30° to the left and right

The Easy setup screen assists you in making necessary

settings.



You can perform this setup anytime by selecting “Easy setup” in the Setup

menu. (B 15)

step 4 Preparing the remote control

Batteries

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

≥ Use alkaline or manganese batteries.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

Use

R6/LR6, AA







Press in and lift up.

Replace the cover.

Insert so the poles (r and j) match those in the remote control.

step 5 Easy setup

Preparation

Turn on your TV and select the appropriate video input mode

(e.g. VIDEO 1, AV 1, etc.) to suit the connection to this unit.

≥ To change your TV’s video input mode, refer to its operating

instructions.

≥ This remote control can perform some basic TV operations (B 4).

Press [Í]1 to turn on the unit.

≥ The Easy setup screen appears automatically.

Press [3, 4]8 to select “Yes” and press [OK]8.

Follow the messages and make the settings with

[3, 4, 2, 1]8 and [OK]8.

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker layout

Select “Surround layout (Recommended)” mode or “Front layout

(Alternative)” mode according to your speaker layout (B 6,

Positioning).

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Speaker output

Make surround sound setting for speaker output.

Press [OK]8 to finish the “Easy setup”.

SC-XH10 EP_RQTX1309-Z_eng.book Page 8 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting Started

Quick Start Guide

ENGLISH

Up to 30 stations can be set.

≥ “SET OK” is displayed when the stations are set, and the radio tunes to

the last preset station.

≥ “ERROR” is displayed when auto presetting is unsuccessful. Preset the

stations manually (B below).

≥ The FM setting is also shown on the TV display.

To cancel the mode, press and hold the button again until “AUTO ST” is

displayed.

≥ The mode is also cancelled when you change the frequency.

Up to 30 stations can be set.

A station previously stored is overwritten when another station is stored in

the same channel preset.

You can select sound effects, desired source, change the settings, access

playback/menus, etc., by using the START menu.

When “Input Selection” is selected

You can select a desired source from the menu.

≥ DVD/CD (B 11), FM RADIO (B left), AV (B below), AUX (B below),

DIGITAL IN (B below),

USB

(B 14)

When “Setup”

is selected

You can change the settings for this unit. (B 14)

When “Sound” is selected

You can select sound quality settings (B 11, EQ (Equaliser)).

Other selectable items

The items that are displayed will vary depending on the media and

source.

When a disc is loaded or an USB device is connected, you can also

access playback or menus from the START menu.

e.g. [DVD-V]

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

You can operate the playback with the indicated controls.



Confirm the audio connection to the SCART (AV), AUX or DIGITAL AUDIO IN

OPTICAL terminal on the main unit when you select the corresponding sources

(B 7). Reduce the volume on the TV to its minimum, and then adjust the

volume of the main unit.

Preparation

≥ Confirm the audio connection to the AUX terminal (B 7).

≥ Set “Auto AUX Link” to “On” (B 15).

During standby mode, when there is audio input to the AUX terminal, the

main unit will automatically turn on and select “AUX” as the source.



When there is no audio input to the AUX terminal for 30 minutes, the main unit

will turn off.

Listening to the radio

Presetting stations automatically

Press [RADIO]4 to select “FM”.

Press [MENU]C.

Each time you press the button:

LOWEST (factory preset):

To begin auto preset with the lowest frequency.

CURRENT:

To begin auto preset with the current frequency.

§ To change the frequency, refer to “Manual tuning” (B below).

Press and hold [OK]8.

Release the button when “FM AUTO” is displayed.

The tuner starts to preset all the stations it can receive into the

channels in ascending order.

Listening/confirming the preset channels

Press [RADIO]4 to select “FM”.

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10]2 B [1] B [2]

Alternatively, press [X, W]@.

If noise is excessive

Press and hold [PLAY MODE]9 to display “MONO”.

Manual tuning

Press [RADIO]4 to select “FM”.

Press [SEARCH6, SEARCH5]? to select the

frequency.

≥ To start auto tuning, press and hold [SEARCH6,

SEARCH5]? until the frequency starts scrolling. Tuning stops

when a station is found.

Presetting stations manually

1 While listening to the radio broadcast

Press [OK]8.

2 While the frequency is flashing on the display

Press the numbered buttons to select a channel.

≥ To select a 2-digit number

e.g. 12: [S10]2 B [1] B [2]

Alternatively, press [X, W]@, and then press [OK]8.

Using the START menu

Press [START]B to show the START menu.

Press [3, 4]8 to select an item and press [OK]8.

≥ To exit, press [START]B.

Press [3, 4, 2, 1]8 to make the setting and press

[OK]8.

Selecting the source using the remote control

Press To select

[DVD]4 DVD/CD

[RADIO]4 FM (B left)

[EXT-IN]4 Each time you press the button:

AV:

AUX:

D-IN:

USB:

For audio input through the SCART (AV)

terminal.

For audio input through the AUX terminal.

For audio input through the DIGITAL AUDIO IN

OPTICAL terminal. (B 10)

(B 14)

Auto AUX Link

e.g.

Input Selection

Setup

Sound

DVD/CD Home Cinema

Input Selection

Setup

Playback Disc

TOP MENU(DVD)

MENU(DVD)

Playback/menu access

SC-XH10 EP_RQTX1309-Z_eng.book Page 9 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Preparation

≥ Make sure that there is an audio connection between this unit and the

TV or other device. (B 7)

≥ Turn on the TV or/and other device.

Press [EXT-IN]4 to choose the source that is used to

connect this unit to the TV or other device.

≥ To change the surround sound effects and sound mode, refer to

“Enjoying sound effects from all speakers” (B right).

Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL

terminal on the main unit.

≥ Underlined items are the factory presets.

≥ The following sound effects may not be available or may have no effect

with some sources.

≥ You may experience a reduction in sound quality when these sound

effects are used with some sources. If this occurs, turn the sound effects

off.



When changing the surround sound effect, Whisper-mode Surround or the

sound modes, the setting is displayed on the TV screen if “DVD/CD” or “USB” is

the selected source during video playback.

For “Front layout (Alternative)”

mode

STANDARD:

Stereo source is output as 2.1-channel audio.

When playing surround sources, you can enjoy 5.1-channel

surround-like effect even with all the speakers at the front.

STEREO:

You can play any source in stereo. Surround sound effect is

unavailable.

A.SRD (Advanced Surround):

You can enjoy surround effect with any audio source.

When the signal is Dolby Digital, “/DOLBY DIGITAL” will also be displayed.

§ Selected mode in “Speaker layout” (B 8, Easy setup).

Listening to the TV or other device’s

audio from this unit’s speakers

Making settings for digital audio input

Available settings

Mode Setting

DUAL: (Only works with Dolby Dual Mono)

– MAIN+SAP

(stereo audio)

–MAIN

–SAP

“SAP” = Secondary Audio Program

≥ Set PCM FIX mode to “OFF” to listen to the “MAIN” or

“SAP” audio.

DRC:

(Dynamic

Range

Compression)

–ON

Adjust for clarity even when the volume is low by

compressing the range of the lowest sound level and

the highest sound level. Convenient for late night

viewing. (Only works with Dolby Digital)

–OFF

The full dynamic range of the signal is reproduced.

PCM FIX: – ON

Select when receiving only PCM signals.

–OFF

Select when receiving Dolby Digital and PCM signals.

≥ When receiving true 5.1-channel surround sound,

select “OFF”.

Press [EXT-IN]4 several times to select “D-IN”.

Press [PLAY MODE]9 and then [3, 4]8 to select the

mode.

While the selected mode is displayed, press [2, 1]8 to

select the desired setting.

Enjoying sound effects from all

speakers

Enjoying surround sound effects

Press [SURROUND];.

Each time you press the button:

For “Surround layout (Recommended)”

mode

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

MULTI-CH:

You can enjoy sound from the front speakers, as well as the surround

speakers even when playing stereo sources.

MANUAL: (B below)

While “MANUAL” is displayed, press [2, 1]8 to select

other surround modes.

Each time you press [2, 1]8:

DOLBY PLII MOVIE

Suitable for movies, or videos recorded in Dolby Surround. (except

[DivX])

DOLBY PLII MUSIC

Adds 5.1-channel effects to stereo sources. (except [DivX])

S.SRD (Super Surround)

You can enjoy surround effect with stereo sources.

STEREO

Sound will only be output to the front speakers and the subwoofer from

any source.

Recommended modes to enjoy TV audio or stereo

sources from all speakers:

≥ DOLBY PLII MOVIE ≥ DOLBY PLII MUSIC ≥ S.SRD

SC-XH10 EP_RQTX1309-Z_eng.book Page 10 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

You can enhance the audio effect for low volume 5.1-channel sound.

(Convenient for late night viewing.)

Press [W.SRD]F.

Each time you press the button:

ON ,------. OFF

Only when “Surround layout (Recommended)” mode is selected in

“Speaker layout” (B 8, Easy setup)

(Effective when playing 5.1-channel sound or when DOLBY PLII/“S.SRD”

(B 10) is selected.)

For “Surround layout (Recommended)”

mode:

Front speaker balance

For “Front layout (Alternative)”

mode:

Front and surround speaker balance

§ Selected mode in “Speaker layout” (B 8, Easy setup).

Preparation

To display the picture, turn on your TV and change its video input mode

(e.g. VIDEO 1, AV 1, etc.) to suit the connection to this unit.



≥ When you press [< OPEN/CLOSE]2 to close the disc tray, this unit

automatically starts playing the disc in the tray.

[MP3] [JPEG] [DivX]

– Only the contents in the current group will be played.

– If there are MP3, JPEG and DivX contents in the current group, only one

content type will be played. (Priority: MP3 # JPEG # DivX)

You can select an item of your desired content type to start play.

(B 12, Using navigation menu)

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.

Press [∫ STOP]5 when you finish to preserve the unit’s motor and your TV

screen.

≥ Total title number may not be displayed properly on iR/iRW.

Selecting sound mode

Press [SOUND]: to select a sound mode.

Each time you press the button:

EQ: Equaliser

SUBW LVL: Subwoofer Level

C.FOCUS: Center Focus (Only when “Surround layout

(Recommended)” mode is selected in “Speaker

layout” (B 8, Easy setup).)

While the selected mode is displayed, press [2, 1]8 to

make the settings.

Refer to the following for setting details of each sound effect.

EQ (Equaliser)

You can select sound quality settings.

Each time you press [2, 1]8:

FLAT: Cancel (no effect is added).

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

SOFT: For background music.

SUBW LVL (Subwoofer level)

You can adjust the amount of bass. The unit automatically selects

the most suitable setting according to the type of playback

source.

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

^-------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

C.FOCUS (Center Focus)

(Effective when playing audio containing the center channel

sound or when DOLBY PLII (B 10) is selected.)

You can make the sound of the center speaker seem like it is

coming from within the TV.

ON ,------. OFF

Whisper-mode Surround

Adjusting the speaker level during playback

Press and hold [–CH SELECT]: to select the speaker.

While the speaker channel is displayed, press [–CH SELECT]:.

e.g. L# C# R# RS# LS# SW

^---------------------------------------------}

≥ You can adjust SW (Subwoofer) only if the disc includes a

subwoofer channel.

≥ When “S” appears, only the surround speaker channel can be

adjusted. Both surround speaker levels will be adjusted at the same

time.

While “C”, “RS”, “LS”, “SW” or “S” is selected

Press [3]8 (increase) or [4]8 (decrease) to adjust the

speaker level for each speaker.

C, RS, LS, SW, S: `6dB to i6dB

(L, R: Only the balance is adjustable.) (B below)

Adjusting the speaker balance during playback

Press and hold [–CH SELECT]: to select “L” or “R”.

While “L” or “R” is selected

Press [2, 1]8 to adjust the speaker balance.

Basic play

Press [Í]1 to turn on the unit.

Press [DVD]4 to select “DVD/CD”.

Press [< OPEN/CLOSE]2 to open the disc tray.

Load the disc.

≥ Load double-sided discs so the label for the

side you want to play is facing up.

Press [1 PLAY]5 to start play.

≥ Press [r, VOL, s]= to adjust the volume.

Basic controls

One touch play: [1 PLAY]5

(during standby mode)

The main unit automatically turns on and starts playing the disc in the

tray.

Stop: [∫ STOP]5

The position is memorised while “RESUME” is on the main unit’s display.

[DVD-V] [VCD] [CD] [MP3] [DivX] This unit can memorise the resume

position for the last 5 discs.

≥ Press [1 PLAY]5 to resume.

– For the power failure resume, refer to page 7.

≥ Press [∫ STOP]5 again to clear the position.

Pause: [; PAUSE]5

≥ Press [1 PLAY]5 to restart play.

Skip: [SKIP:,SKIP9]5

Search: [SEARCH6, SEARCH5]5 (during play)

Slow-motion: [SEARCH6, SEARCH5]5 (during pause)

≥ Search: Up to 4 steps

Slow-motion: Up to 3 steps

≥ Press [1 PLAY]5 to start normal play.

≥ [VCD] [DivX] Slow-motion: Forward direction only.

Frame-by-frame (during pause)

[DVD-V] : [2;, ;1]8

[DVD-V] [VCD] [DivX] : [; PAUSE]5 (forward direction only)

On-screen item select: [3, 4, 2, 1, OK]8

[3, 4, 2, 1]8: Select

[OK]8: Confirm

Enter number: Numbered buttons

[DVD-V] [VCD] [CD]

e.g. To select 12: [S10]2 B [1] B [2]

Label facing up

SC-XH10 EP_RQTX1309-Z_eng.book Page 11 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

You can select to play from your desired item while the navigation menu

screen is displayed.

e.g. Data disc

Play starts from the selected content.

[MP3] [JPEG] [DivX]

≥ To return to the previous folder, press [RETURN]D. You can also do

this by selecting “ ” in the menu.

≥ Maximum: 16 characters for file/folder name.

≥ Only the contents in the current group will be played.

≥ If there are MP3, JPEG and DivX contents in the current group, play will

be based on the selected content type.

∫ Rotating a picture

Preparation

To clear the selected program

1Press [1]8 and then press [3, 4]8 to select the program.

2Press [CANCEL]3.

To clear the whole program

Press [1]8 several times to select “Clear All”, and then press [OK]8.

The whole program is also cleared when the disc tray is opened, the unit

is turned off or another source is selected.

[CD] All tracks will be played in random order.

[MP3] [JPEG] [DivX] The MP3/JPEG/DivX contents of the selected group

will be played in random order.

[DVD-V] Show a disc top menu: [TOP MENU]7

[DVD-V] Show a disc menu: [MENU]C

Return to previous screen: [RETURN]D

[VCD] (with playback control)

Show a disc menu: [RETURN]D

Turn PBC function on/off: [MENU]C

Main unit display: [FL DISPLAY]E

[DVD-V] [MP3] [DivX]

Time display

,-. Information display

[JPEG]

SLIDE

,-.Contents number

Playing from the selected item

Using navigation menu

[CD] [MP3] [JPEG] [DivX]

Press [3, 4]8 to select an item and press [OK]8.

≥ Press [2, 1]8 to skip page by page.

Selecting the picture in Thumbnail menu

[JPEG]

While the picture is displayed, press [TOP MENU]7 to

show the thumbnail menu.

e.g.

Press [3, 4, 2, 1]8 to select a picture and press

[OK]8.

≥ Press [SKIP:, SKIP 9]5 to skip page by page.

While a picture is displayed, press [3, 4, 2, 1]8 to rotate the

picture.

/ .../Underwater.MP3

1/3

Perfume

Underwater

Fantasy planet

Starpersons1

00:02:40

Group (Folder):

Content (File/Track):

: MP3/CD-DA

: JPEG

: DivX

Elapsed time

Other modes of play

Program and Random play

[CD] [MP3] [JPEG] [DivX]

While stopped, press [PLAY MODE]9 to select the play

mode.

Each time you press the button:

[CD] [MP3] Music Program menu

[JPEG] Picture Program menu

[DivX] Video Program menu

RND (Random) menu

Exit program and random menus

Program play (up to 30 items)

Press [3, 4]8 to select an item and press [OK]8.

e.g. [MP3]

≥ When a content is selected, it will be programmed.

≥ Repeat this step to program other items.

≥ [MP3] [JPEG] [DivX] To return to the previous folder, press

[RETURN]D. You can also do this by selecting “ ” in the

menu.

Press [1 PLAY]5 to start play.

Random play

[MP3] [JPEG] [DivX]

Press [3, 4]8 to select the desired group and press

[OK]8.

e.g. [MP3]

≥ To return to the previous folder, press [RETURN]D. You can also do

this by selecting “ ” in the menu.

[MP3] [JPEG] [DivX]

Press [3, 4]8 to select the desired content

and press

[OK]8.

§ If there are MP3, JPEG and DivX contents, random play will be

based on the selected content type.

Press [1 PLAY]5 to start play.

Music Program

Track 1

Track 2

Track 3

Track 4

/ .../Track 1.MP3

RND

1/10

Track 1

Track 2

Track 3

Track 4

SC-XH10 EP_RQTX1309-Z_eng.book Page 12 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsReference

ENGLISH

This works only when the elapsed play time can be displayed. It also

works with all JPEG content.

Items shown differ depending on the type of disc and playback mode.



Random mode will be cleared when you change the repeat mode.

Repeat play

During play, press and hold [–REPEAT]9, to show the

repeat mode.

While the repeat mode is displayed, press [–REPEAT]9 to select the

item to be repeated.

e.g. [DVD-V]

`Chapter ---. `Title ---. `Off

^-------------------------------------------_------b

To cancel, select “Off”.

Using on-screen menus

Press [FUNCTIONS]6 to show the on-screen menu.

Each time you press the button:

Menu 1 (Disc)

Menu 2 (Video)

Menu 3 (Audio)

Exit

Press [3, 4, 2, 1]8 to select the item and press

[OK]8.

Press [3, 4]8 to make the settings and press [OK]8.

Items shown will vary depending on the type of disc.

Menu 1 (Disc)

Track Search, Title Search, Content Search, Chapter

To start from a specific item

e.g. [DVD-V]: T2 C5

To select 12: [S10]2 B [1] B [2] B [OK]8

Audio

[DVD-V] [DivX] (with multiple soundtracks)

To select audio soundtrack

[VCD]

To select “L”, “R”, “L+R” or “L R”

Actual operations depend on the disc. Read the disc’s instructions for

details.

Signal type/data

LPCM/ D/DTS

/MP3/MPEG: Signal type

§ During playback of DTS source, there will be no sound from the

speakers.

≥ [DivX] It may take some time for play to start if you change the audio on

a DivX video disc.

1/5

Off O

Title Search

Current item

Item name

e.g. [DVD-V] Menu 1 (Disc)

Off O

Chapter Search

1/5

Current setting

e.g. [DVD-V] Menu 1 (Disc)

Play Speed

[DVD-V]

To change play speed

– from “k0.6” to “k1.4” (in 0.1-unit steps)

≥ Press [1 PLAY]5 to return to normal play.

≥ After you change the speed

– Dolby Pro Logic II has no effect.

– Audio output switches to 2-channel stereo.

– Sampling frequency of 96 kHz is converted to 48 kHz.

≥ This function may not work depending on the disc’s recording.

Repeat Mode

(B left, Repeat play)

A-B Repeat (To repeat a specified section)

Except [JPEG] [DivX]

Press [OK]8 at the starting and ending points.

≥ Select “Off” to cancel.

Subtitle

[DVD-V] (with multiple subtitles)

To select subtitle language

≥ On iR/iRW, a subtitle number may be shown for subtitles that are

not displayed.

[DivX] (B 16, Displaying DivX subtitles text)

Angle

[DVD-V] (with multiple angles)

To select a video angle

Menu 2 (Video)

Transfer Mode

To select the method of conversion for video output to suit the type

of material

Auto, Video

≥ When the content is distorted, select “Video”.

≥ This may have no effect with some sources.

Zoom

To select zoom

Normal, 1, 2, 3

Menu 3 (Audio)

Dialogue Enhancer

To make the dialogue in movies easier to hear

[DVD-V] [DivX] (Dolby Digital, 3-channel or higher, with the dialogue

recorded in the center channel)

Off, On

SC-XH10 EP_RQTX1309-Z_eng.book Page 13 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

You can connect and play tracks or files from USB mass storage class

devices (B 16).

Devices which are defined as USB mass storage class:

– USB devices that support bulk only transfer.

Preparation

≥ Before connecting any USB mass storage device to the unit, ensure

that the data stored therein has been backed up.

≥ It is not recommended to use a USB extension cable. The USB device

connected using the cable will not be recognised by this unit.

≥ To playback a selected item, press [∫ STOP]5 and refer to “Playing

from the selected item” (B 12).

≥ For other operating functions, they are similar to those described in

“Playing Discs” (B 11 to 13).



≥ Maximum: 189 folders (excluding Root folder), 1900 files, 16 characters for

file/folder name.

≥ Only one memory card will be selected when connecting a multiport USB

card reader. Typically the first memory card inserted.

≥ To return to the previous screen, press [RETURN]D.

≥ To exit the screen, press [START]B.

≥ The settings remain intact even if you switch the unit to standby.

≥ Underlined items are the factory settings in the following menus.

Subtitle Text [DivX]

Select a suitable item according to the language used for DivX subtitles

text (B 16).

Video Out-SCART

Choose the video signal format to be output from the SCART (AV)

terminal.

≥ Video

≥ S-Video

≥ RGB 1: (Only when connected to a RGB compatible TV)

If you always would like to view the picture from the unit in RGB signal,

select this mode. The TV screen will automatically switch to display the

picture from the unit when the unit is turned on.

≥ RGB 2: (Only when connected to a RGB compatible TV)

When in TV tuner mode, if the selector is set to “DVD/CD”, the TV

screen will automatically switch to display the picture from the unit only

during disc playback ([DVD-V] [VCD]) or when viewing on-screen menu of

DVD/CD.

The TV picture will be displayed when the selector is set to “AV”. With

other selectors, the picture from this unit will be displayed.

Playing from an USB device

Connect the USB device (not supplied) to the USB port

( 6).

When you press [EXT-IN]4 to select “USB”, this unit

automatically starts playing the contents in the USB

device.

Changing the player settings

Press [DVD]4 to select “DVD/CD”.

Press [START]B to show the START menu.

Press [3, 4]8 to select “Setup” and press [OK]8.

Press [3, 4]8 to select menu and press [OK]8.

Press [3, 4]8 to select the item and press [OK]8.

Press [3, 4]8 to make the settings and press [OK]8.

Language menu

Display

Choose the language for the on-screen messages.

≥ English

≥ Français ≥ Español ≥ Deutsch

≥ Русский ≥ Magyar ≥ Polski ≥ Çesky

Audio

Choose the audio language.

≥ English

≥ French ≥ Spanish ≥ German

≥ Russian ≥ Hungarian ≥Polish ≥ Czech

Setup

Display

Audio

Subtitle

DVD Menu

Subtitle Text

: English

: Auto

: English

: Latin2

Language

Video

Audio

Others

Set

RETURN

Item

Current setting

Subtitle

Choose the subtitle language.

≥ Auto

≥ English ≥ French ≥ Spanish

≥ German ≥ Russian ≥ Hungarian ≥ Polish

≥ Czech ≥Off

DVD Menu

Choose the language for disc menus.

≥ English

≥ French ≥ Spanish ≥ German

≥ Russian ≥ Hungarian ≥ Polish ≥ Czech

§ Some discs start in a certain language despite any changes you make

here.

When the selected language is not available on the disc, the default

language is played. There are discs where you can only switch the

language from the menu screen (B 12).

≥ Latin1 ≥ Latin2

≥ Cyrillic ≥ Turkish

Video menu

TV Aspect

Choose the setting to suit your TV.

≥ 16:9

: Widescreen TV (16:9)

≥ 4:3 Pan&Scan: Regular aspect TV (4:3)

The sides of the widescreen picture are cut off so it

fills the screen (unless prohibited by the disc).

≥ 4:3 Letterbox: Regular aspect TV (4:3)

Widescreen picture is shown in the letterbox style.

Time Delay

When connected with a Plasma display, adjust if you notice the audio is

out of sync with the video.

≥ 0ms

≥ 20ms ≥ 40ms ≥ 60ms

≥ 80ms ≥ 100ms

TV System

Choose the appropriate output source when connecting to a TV

(B 17, Video systems).

≥ NTSC: When connected to an NTSC TV.

≥ PAL

: When connected to a PAL TV.

≥ Auto: Selects the original output source when playing PAL or NTSC

discs.

SC-XH10 EP_RQTX1309-Z_eng.book Page 14 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationReference

ENGLISH

DivX Registration [DivX]

Display the unit’s registration code.

You need this registration code to purchase and play DivX Video-on-

Demand (VOD) content (B 16).

DivX Deregistration [DivX]

Display the unit’s deregistration code.

You need this deregistration code to cancel this unit’s registration (B 16).

This setting is only selectable after playing DivX VOD content for the first

time.

Ratings

Set a rating level to limit DVD-Video play.

Setting ratings (When level 8 is selected)

≥ 1 to 7

≥ 8 No Limit

When you select your ratings level, a password screen is shown.

The default password is “8888”.

Enter the 4-digit password with the numbered buttons, and press [OK]8.

You can change the default password (B below)

Do not forget your password.

A message screen will be shown if a DVD-Video disc exceeding the rating

level is inserted in the unit.

Follow the on-screen instructions.

Set Password

Change the password for “Ratings”.

When you change the password for the first time:

The default password is “8888”.

Follow the on-screen instructions.

Restore Default Settings

This returns all values in the Setup menu to the default settings except the

password and ratings level.

Press [2, 1]8 to select “Yes” and press [OK]8.

Turn the unit off and on again.

Audio menu

Dynamic Range

≥ On: Adjusts for clarity even when the volume is low. Convenient for

late night viewing. (Only works with Dolby Digital)

≥ Off

: The full dynamic range of the signal is reproduced.

Speaker Settings

Select the delay time of the speakers.

(Effective only when “Surround layout (Recommended)” mode is selected

in “Speaker layout” (B 8, Easy setup).)

(Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for

the subwoofer, should be the same distance from the seating position.

If you have to place the center or surround speakers closer to the seating

position, adjust the delay time to make up for the difference.

If either distance a or b is less than c, find the difference in the table

and change to the recommended setting.

a Center speaker b Surround speaker

Difference (Approx.) Setting Difference (Approx.) Setting

30 cm 1ms 150 cm 5ms

60 cm 2ms 300 cm 10ms

90 cm 3ms 450 cm 15ms

120 cm 4ms

150 cm 5ms

≥ C Delay (Center Delay):

0ms

, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker.

≥ LS/RS Delay (Left Surround/Right Surround Delay):

0ms

, 5ms, 10ms, 15ms

Select the delay time for your surround speakers.

≥ Tes t To ne:

Use the test tone to listen to the speaker output to confirm speaker

connections.

Test tone will be output to each channel in the following order.

Left, Center, Right, Surround Right, Surround Left, Subwoofer

To stop the test tone, press [RETURN]D.











Actual speaker position

Ideal speaker position

Primary listening

distance

Approximate room dimensions

Circle of constant primary listening distance

Others menu

Auto AUX Link

≥ On: When this unit is in standby mode, this unit will turn on and

change the source to “AUX” when there is an audio signal to

the AUX terminal. (B 9)

≥ Off

Slide Show Time

Set the speed of the slideshow.

≥ 3 Seconds

≥ 5 Seconds ≥ 10 Seconds ≥ 15 Seconds

Easy setup

You can execute basic settings to optimise your home theater system.

(B 8)

FL Dimmer

Change the brightness of the unit’s display.

≥ Bright

≥ Dim: The display is dimmed.

≥ Auto: The display is dimmed, but brightens when you perform some

operations.

Screen Saver

This is to prevent burn marks on the TV screen.

≥ Off

≥ Wait 5 min

: If there is no operation for 5 minutes, the screen saver will

be shown. The TV screen will resume when you perform

some operations. (This does not work during playback.)

SC-XH10 EP_RQTX1309-Z_eng.book Page 15 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

ABOUT DIVX VIDEO:

DivX

is a digital video format created by DivX, Inc. This is an official DivX

Certified

device that plays DivX video. Visit divx.com for more

information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified

device must be registered in order to play purchased

DivX Video-on-Demand (VOD) movies.

To obtain your registration code, locate the DivX VOD section in your

device setup menu.

Go to vod.divx.com for more information on how to complete your

registration.

Display the unit’s registration code

(B 15, “DivX Registration” in Others menu)

≥ After playing DivX VOD content for first time, “DivX Registration” is not

selectable until this unit is deregistered.

≥ If you purchase DivX VOD content using a registration code different

from this unit’s code, you will not be able to play this content.

Cancel the unit’s registration

Select “DivX Deregistration” (B 15) and follow the on-screen instructions.

Use the deregistration code to cancel the registration in

http://vod.divx.com.

Regarding DivX content that can only be played a set

number of times

Some DivX VOD contents can only be played a set number of times.

When you play this content, the number of times already played and

initially playable number of times is displayed.

≥ The remaining number of plays decreases each time a programme is

played.

Resume function (B 11, [∫ STOP]5) does not work.

You can display subtitles text on a DivX video disc with this unit.

This function has no relation to the subtitles specified in the DivX standard

specifications and has no clear standard.

Set “Subtitle” in Menu 1 (Disc) (B 13).

DivX video files that do not display “On” do not contain subtitles text.

Subtitles text cannot be displayed.

Types of subtitles text file that can be displayed

Subtitles text that satisfy the following conditions can be displayed on this

unit.

≥ File format: MicroDVD, SubRip, or TMPlayer

≥ File extension: “.SRT”, “.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”

≥ File name: No more than 16 characters excluding the file extension

≥ The DivX video file and subtitles text file are inside the same folder, and

the file names are the same except for the file extensions.

≥ If there are more than one subtitles text files inside the same folder, they

are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.



≥ Depending on the methods used to create the file or the state of the

recording, only parts of the subtitles may be displayed, or the subtitles may

not be displayed at all.

≥ The subtitles text cannot be displayed during menu display or when

operations such as search are being performed.

≥ If the subtitles text are not displayed correctly, try changing the subtitle text

settings (B 14).

Commercial discs

Recorded discs and USB devices

≥ Before playback, finalise the disc on the device it was recorded on.

≥ It may not be possible to play all the above-mentioned medias in some

cases due to the type of media, the condition of the recording, the

recording method, or how the files were created (B 17, About MP3/

JPEG/DivX files).

≥ During playback of DTS source, there will be no sound from the

speakers.

Blu-ray Discs, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-Audio,

DVD-ROM, DVD-VR, CD-ROM, CDV, CD-G, SACD, DTS Music Discs,

WMA discs and Photo CD, DVD-RAM, and “Chaoji VCD” available on the

market including CVD, DVCD and SVCD that do not conform to

IEC62107.

DivX information

Displaying DivX subtitles text

You must register your device to play

DivX protected videos.

Registration code:XXXXXXXXXX

10 alphanumeric characters

Media that can be played

Type of media/

Logo

Remarks Indicated as

DVD-Video High quality movie and

music discs

[DVD-V]

Video CD Music discs with video

Including SVCD

(Conforming to IEC62107)

[VCD]

CD Music discs [CD]

Type of media/

Logo

Formats Indicated as

DVD-R/RW ≥ DVD-Video Format

≥ MP3 format

≥ JPEG format

≥ DivX

format

[DVD-V]

[MP3]

[JPEG]

[DivX]

DVD-R DL ≥ DVD-Video Format

≥ DivX

format

[DVD-V]

[DivX]

rR/rRW/rRDL ≥iVR (iR/iRW Video

Recording) Format

[DVD-V]

CD-R/RW ≥ CD-DA format

≥ MP3 format

≥ JPEG format

≥ DivX

format

[CD]

[MP3]

[JPEG]

[DivX]

USB device ≥ MP3 format

≥ JPEG format

≥ DivX

format

[MP3]

[JPEG]

[DivX]

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the technical

specifications of the Compact Disc Digital Audio (CD-DA) format so

playback may not be possible.

Discs that cannot be played

SC-XH10 EP_RQTX1309-Z_eng.book Page 16 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

This unit can play PAL and NTSC, but the “TV System” (B 14) of this unit

must match the system of your TV.



Depending on the PAL video on the disc, the image may not be displayed

correctly on an NTSC TV.

≥ Do not attach labels or stickers to discs. This may cause disc warping,

rendering it unusable.

≥ Do not write on the label side with a ball-point pen or other writing

instrument.

≥ Do not use record cleaning sprays, benzine, thinner, liquids which

prevent static electricity, or any other solvent.

≥ Do not use scratch-proof protectors or covers.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented

discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

≥ There may be differences in the display order on the menu screen and

computer screen.

≥ This unit cannot play files recorded using packet write.

DVD-R/RW

≥ Discs must conform to UDF bridge (UDF 1.02/ISO9660).

≥ This unit does not support multi-session. Only the default session is

played.

CD-R/RW

≥ Discs must conform to ISO9660 level 1 or 2 (except for extended

formats).

≥ This unit supports multi-session but if there are many sessions it takes

more time for play to start. Keep the number of sessions to a minimum

to avoid this.

USB device

≥ This unit does not guarantee connection with all USB devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16 and FAT32 file systems are supported.

≥ This unit supports USB 2.0 Full Speed.

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that

came with the cloth.

Do not use commercially available lens cleaners as they may cause

malfunction. Cleaning of the lens is generally not necessary although

this depends on the operating environment.

You can attach all of the speakers (except subwoofer) to a wall.

≥ The wall or pillar on which the speakers are to be attached should be

capable of supporting 10 kg per screw. Consult a qualified building

contractor when attaching the speakers to a wall. Improper attachment

may result in damage to the wall and speakers.

1 Drive a screw (not supplied) into the wall.

2 Fit the speaker securely onto the screw(s) with the hole(s).

∫ Tips

Use the measurements indicated below to identify the screwing positions

on the wall.

≥ Leave at least 20 mm of space above the speaker and 10 mm on each

side to allow enough space for fitting the speaker.

Video systems

Disc handling precautions

About MP3/JPEG/DivX files

[MP3] (Extension: “.MP3”, “.mp3”)

≥ Sampling frequency and compression rate:

–8

kHz

, 11.02

kHz

, 12

kHz

, 16

kHz

, 22.05

kHz

, 24 kHz (8

kbps

160 kbps), 32

kHz

, 44.1

kHz

and 48 kHz (32 kbps to 320 kbps)

≥ ID3 tags: version 1, 2

[JPEG] (Extension: “.JPG”, “.jpg”, “.JPEG”, “.jpeg”)

≥ JPEG files taken on a digital camera that conform to DCF Standard

(Design rule for Camera File system) Version 1.0 are displayed.

– Files that have been altered, edited or saved with computer picture

editing software may not be displayed.

≥ This unit cannot display moving pictures, MOTION JPEG and other

such formats, still pictures other than JPEG (e.g. TIFF), or play

pictures with attached audio.

[DivX] (Extension: “.DIVX”, “.divx”, “.AVI”, “.avi”)

≥ DivX files greater than 2 GB or have no index may not be played

properly on this unit.

≥ This unit supports all resolutions up to maximum of 720k480

(NTSC)/720k576 (PAL).

Maintenance

Clean this unit with a soft, dry cloth

Before moving the unit, ensure the disc tray is empty. Failure to

do so will risk severely damaging the disc and the unit.

Speaker installation option

Attaching to a wall

At least 30 mm

‰7.0 mm to ‰9.4 mm

Wall or pillar

3 mm to 5 mm

‰4.0 mm

A 12.3 mm

B 106.7 mm

C 40 mm

D 40 mm









SC-XH10 EP_RQTX1309-Z_eng.book Page 17 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Before requesting service, make the following checks. If you are in doubt

about some of the check points, or if the solutions indicated in the

following guide do not solve the problem, consult your dealer for

instructions.

No power.

Insert the AC mains lead securely. (B 7)

The unit is automatically switched to standby mode.

≥ The Sleep timer was working and had reached the set time limit. (B 4)

≥ The main unit will automatically switch to standby mode after 30

minutes of inactivity. (B 4)

≥ The Auto AUX link was working. (B 9)

The display is dark.

Select “Bright” in “FL Dimmer” in the Others menu. (B 15)

“NO PLAY”

≥ You inserted a disc the unit cannot play; insert one it can. (B 16)

≥ You inserted a blank disc.

≥ You inserted a disc that has not been finalised.

“NO DISC”

≥ You have not inserted a disc; insert one.

≥ You have not inserted the disc correctly; insert it correctly. (B 11)

“OVER CURRENT ERROR”

The USB device is drawing too much power. Switch to “DVD/CD” mode,

remove the USB and turn the unit off.

“F61”

Check and correct the speaker cable connections. If this does not fix the

problem, consult the dealer. (B 6)

“F76”

There is a power supply problem. Consult the dealer.

“DVD U11”

Disc may be dirty. Wipe it clean.

“ERROR”

Incorrect operation performed. Read the instructions and try again.

“DVD H∑∑”

“DVD F∑∑∑”

∑ stands for a number.

≥ Trouble may have occurred. The numbers following “H” and “F” depend

on the status of the unit. Turn the unit off and then back on.

Alternatively, turn the unit off, disconnect the AC mains lead, and then

reconnect it.

≥ If the service numbers fail to clear, note the service number and contact

a qualified service person.

“REMOTE 1” or “REMOTE 2”

Match the modes on the main unit and remote control. Depending on the

number being displayed (“1” or “2”), press and hold [OK]8 and the

corresponding numbered button ([1] or [2]) for at least 2 seconds. (B 4)

No response when any buttons are pressed.

≥ This unit cannot play discs other than the ones listed in these operating

instructions. (B 16)

≥ The unit may not be operating properly due to lightning, static electricity

or some other external factor. Turn the unit off and then back on.

Alternatively, turn the unit off, disconnect the AC mains lead, and then

reconnect it.

≥ Condensation has formed. Wait 1 to 2 hours for it to evaporate.

No response when remote control buttons are pressed.

≥ Check that the batteries are installed correctly. (B 8)

≥ The batteries are depleted. Replace them with new ones. (B 8)

≥ Aim the remote control at the remote control signal sensor and operate.

(B 4)

Other products respond to the remote control.

Change the remote control operating mode. (B 4)

Cannot display the START menu.

Remove the disc and then press [START]B again.

No picture or sound.

≥ Check the video or speaker connection. (B 6, 7)

≥ Check the power or input setting of the connected equipment and the

main unit.

≥ Check that the disc has something recorded on it.

You have forgotten your ratings password.

Reset all the settings to Factory Preset.

While stopped and “DVD/CD” is the source, press and hold

[< OPEN/CLOSE]2 on the main unit and [S10]2 on the remote control

until “RESET” appears on the main unit’s display. Turn the unit off and on

again.

All settings will return to the default values.

Some characters are not displayed correctly.

Characters other than English alphabet and Arabic numerals may not be

displayed correctly.

It takes time before play starts.

≥ Play may take time to begin when an MP3 track has still picture data.

Even after the track starts, the correct play time will not be displayed.

This is normal. [MP3]

≥ This is normal on DivX video. [DivX]

A menu screen appears during skip or search. [VCD]

This is normal for Video CDs.

Playback control menu does not appear.

[VCD] with playback control

Press [MENU]C to change to PBC on and then press [RETURN]D

during playback.

Play does not start.

≥ If playing DivX VOD content, refer to the homepage where you

purchased the DivX VOD content. (Example: http://vod.divx.com) [DivX]

≥ If a disc contains CD-DA and other formats, proper playback may not be

possible.

No subtitles.

≥ Display the subtitles. (“Subtitle” in Menu 1) (B 13)

≥ Subtitles may not be displayed depending on the disc. [DivX]

Point B is automatically set.

The end of an item becomes point B when it is reached.

The Setup menu cannot be accessed.

Select “DVD/CD” or “USB” as the source.

Troubleshooting guide

Power

Unit displays

General operation

Disc operation

SC-XH10 EP_RQTX1309-Z_eng.book Page 18 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH

Effects do not work.

Some audio effects do not work or have less effect with some discs.

Humming is heard during play.

An AC mains lead or fluorescent light is near the main unit. Keep other

appliances and cables away from the main unit.

No sound.

≥ There may be a slight pause in sound when you change the play speed.

≥ If the input source is bitstream, set the sound setting to PCM on the

external equipment.

≥ Audio may not be output due to how the files were created. [DivX]

≥ During playback of DTS source, there will be no sound from the

speakers. Select a different audio source (e.g. Dolby Digital). (B 13)

No sound from the TV.

Confirm the audio connection. Press [EXT-IN]4 to select the

corresponding source. (B 7, 9)

No sound from the surround speakers.

≥ When using the “Surround layout (Recommended)” mode, press

[SURROUND]; to select “MULTI-CH”. (B 10)

≥ When using the “Front layout (Alternative)” mode, press

[SURROUND]; to select “A.SRD”. (B 10)

The picture on the TV is not displayed correctly or

disappears.

≥ The unit and TV are using different video systems. Use a multi-system

or PAL TV.

≥ The system used on the disc does not match your TV.

– Change the “TV System” settings to match your TV. (B 14)

(Depending on the PAL video on the disc, the image may not be

displayed correctly on an NTSC TV.)

≥ Ensure that the unit is connected directly to the TV, and is not

connected through a VCR. (B 7)

≥ Mobile telephone chargers can cause some disturbance.

≥ If you are using an indoor TV antenna, change to an outdoor antenna.

≥ The TV antenna wire is too close to the unit. Move it away from the unit.

Picture size does not fit the screen.

≥ Change “TV Aspect” in the Video menu. (B 14)

≥ Use the TV to change the aspect.

≥ Change the zoom setting. (“Zoom” in Menu 2) (B 13)

Menu is not displayed correctly.

Restore the zoom ratio to “Normal”. (“Zoom” in Menu 2) (B 13)

The USB drive or its contents cannot be read.

≥ The USB drive format or its contents is/are not compatible with the

system. (B 14)

≥ The USB host function of this product may not work with some USB

devices.

≥ USB devices with storage capacity of more than 32 GB may not work in

some instances.

Slow operation of the USB device.

Large file size or high memory USB device takes longer time to read and

display on the TV.

Distorted sound or noise is heard.

≥ Adjust the position of the FM antenna.

≥ Use an outdoor antenna. (B 7)

A beat sound is heard.

Turn the TV off or move it away from the unit.

“/”

The operation is prohibited by the unit or disc.

“/ Incorrect Disc Region”

Only DVD-Video discs that include or have the same region number as

the one on the rear panel of this unit can be played. (B Cover page)

Sound

Picture

USB

Radio

TV displays

Licenses

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby

Laboratories.

This item incorporates copy protection technology that is protected by

U.S. patents and other intellectual property rights of Rovi Corporation.

Reverse engineering and disassembly are prohibited.

“DVD Logo” is a trademark of DVD Format/Logo Licensing

Corporation.

DivX

, DivX Certified

and associated logos are trademarks of DivX,

Inc. and are used under license.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS

and Thomson.

SC-XH10 EP_RQTX1309-Z_eng.book Page 19 Friday, March 4, 2011 5:55 PM

RQTX1309

Getting StartedPlaying DiscsOther OperationsReference

ENGLISH



1 Specifications are subject to change without notice.

Mass and dimensions are approximate.

2 Total harmonic distortion is measured by a digital spectrum analyzer.

Specifications

AMPLIFIER SECTION

RMS Output Power: Dolby Digital Mode

Front Ch

Surround Ch

Center Ch

Subwoofer Ch

50 W per channel (5 ≠), 1 kHz, 10 % THD

80 W per channel (3 ≠), 100 Hz, 10 % THD

Total RMS Dolby Digital mode power 330 W

FM TUNER, TERMINALS SECTION

Preset Memory FM 30 stations

Frequency Modulation (FM)

Frequency range 87.50 MHz to 108.00 MHz (50-kHz step)

Antenna terminals 75 ≠ (unbalanced)

Digital audio input

Optical digital input

Sampling frequency

Optical terminal

32 kHz, 44.1 kHz, 48 kHz

USB Port

USB standard

Media file format support

USB 2.0 Full Speed

MP3 (¢.mp3)

JPEG (¢.jpg, ¢.jpeg)

DivX (¢.divx, ¢.avi)

USB device file system

USB Port power

Bit rate

FAT12, FAT16, FAT32

Max. 500 mA

Up to 4 Mbps (DivX)

DISC SECTION

Discs played (8 cm or 12 cm)

(1) DVD (DVD-Video, DivX

§4, 5

)

(2) DVD-R (DVD-Video, MP3

§2, 4

, JPEG

§3, 4

, DivX

§4, 5

)

(3) DVD-R DL (DVD-Video, DivX

§4, 5

)

(4) DVD-RW (DVD-Video, MP3

§2, 4

, JPEG

§3, 4

, DivX

§4, 5

)

(5) iR/iRW (Video)

(6) iR DL (Video)

(7) CD, CD-R/RW (CD-DA, Video CD, SVCD

§1

, MP3

§2, 4

, JPEG

§3, 4

DivX

§4, 5

)

§1 Conforming to IEC62107

§2 MPEG-1 Layer 3, MPEG-2 Layer 3, MPEG-2.5 Layer 3

§3 Exif Ver 2.0 JPEG Baseline files

Picture resolution:

16:9 min. size 4k4, max. size (720k8)k(405k8);

4:3 min. size 4k4, max. size (720k8)k(540k8)

§4 The total combined maximum number of recognizable audio,

picture and video contents and groups: 1900 audio, picture and

video contents and 189 groups. (Excluding Root folder)

§5 Plays DivX

video.

Pick up

Wavelength (DVD/CD) 655/790 nm

Laser power CLASS 1M

Audio output (Disc)

Number of channels 5.1 ch (FL, FR, C, SL, SR, SW)

VIDEO SECTION

Video system PAL, NTSC

Composite video output

Output level

Terminal

1Vp-p (75≠)

SCART jack (1 system)

S-video output

Y output level

C output level

Terminal

1Vp-p (75≠)

PAL; 0.3 Vp-p (75 ≠)

NTSC; 0.286 Vp-p (75 ≠)

SCART jack (1 system)

RGB video output

R output level

G output level

B output level

Terminal

0.7 Vp-p (75 ≠)

SCART jack (1 system)

SPEAKER SECTION

[Front\speakers\SB-HF70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

80 dB/W (1 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.32 kg

[Surround\speakers\SB-HS70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

80 dB/W (1 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.32 kg

[Center\speaker\SB-HC70]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 5 ≠

Full range 6.5 cm Cone type

Output sound pressure

Frequency range

Dimensions (WtHtD)

Mass

80 dB/W (1 m)

100 Hz to 25 kHz (j16 dB)

150 Hz to 22 kHz (j10 dB)

80 mmk119 mmk68 mm

0.39 kg

[Subwoofer\SB-HW50]

Type

Speaker unit(s)

1 way, 1 speaker system (Bass reflex)

Impedance 3 ≠

Woofer 16 cm Cone type

Output sound pressure

Frequency range

Dimensions (WtHt

Mass

78 dB/W (1 m)

32 Hz to 220 Hz (j16 dB)

40 Hz to 180 Hz (j10 dB)

180 mmk262 mmk300 mm

3.5 kg

GENERAL

Power supply

Power consumption

Dimensions (WtHtD)

Mass

Operating temperature range

Operating humidity range

AC 220 V to 240 V, 50 Hz

Main unit 50 W

360 mmk48 mmk273 mm

Main unit 2.0 kg

0 oC to r40 oC

35 % to 80 % RH (no condensation)

Power consumption in standby mode approx. 0.8 W

SC-XH10 EP_RQTX1309-Z_eng.book Page 20 Friday, March 4, 2011 5:55 PM

Stránka sa načítava ...

Panasonic SCXH10EP Návod na používanie

Značka: Panasonic

Model: SCXH10EP

Kategória: DVD prehrávače

Typ: Návod na používanie

Stiahnite si PDF

správa

V iných jazykoch

English: Panasonic SCXH10EP Operating instructions
polski: Panasonic SCXH10EP Instrukcja obsługi

Panasonic SCXH10EP Návod na používanie

Panasonic SCXH10EP Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty