Silvercrest SRR 3 A1 Návod na obsluhu

V 1.15

English ..................................................................... 2

Slovenščina ........................................................... 23

Česky .................................................................... 44

Slovenčina ............................................................. 65

Deutsch ................................................................. 86

SilverCrest SRR 3 A1

2 - English

Content

Introduction ......................................................................... 3

Intended use ........................................................................ 3

Supplied items ..................................................................... 4

Technical data ...................................................................... 5

Safety instructions ............................................................... 5

Copyright ............................................................................ 8

Prior to use .......................................................................... 9

Charging the battery ................................................................................... 9

First use ............................................................................. 10

Cleaning / maintenance ..................................................... 11

Cleaning ..................................................................................................... 11

Cleaning after each use ............................................................................ 11

Cleaning every two months ...................................................................... 12

Maintenance .............................................................................................. 15

Environmental and disposal information ........................... 17

Removing the battery ................................................................................. 17

Conformity information ..................................................... 19

Troubleshooting ................................................................ 20

Warranty and servicing advice .......................................... 21

SilverCrest SRR 3 A1

English - 3

Introduction

Thank you for purchasing a SilverCrest product.

The SilverCrest SRR 3 A1 rotary shaver, referred to below as shaver, has a

triple-head shaving system with contour adjustment and double ring

system. The stainless steel precision blade system thus ensures optimal

shaving results. The integrated trimmer enables the trimming of long facial

hair or sideburns.

Intended use

The shaver may only be used privately and not for industrial or commercial

purposes. Furthermore, the shaver may not be used outdoors. This shaver

meets all relevant norms and standards in conjunction with CE conformity.

In the event of any modification to the shaver that was not approved by

the manufacturer, compliance with these standards is no longer

guaranteed. The manufacturer does not accept any liability for any

resulting damage or faults in such cases.

Please observe the regulations and laws in the country of use.

SilverCrest SRR 3 A1

4 - English

Supplied items

 Shaver

 Protective cover

 Mains cable

 Travel case

 Cleaning brush

 These instructions

These instructions have a fold-out cover. The shaver is illustrated with a

numbering system on the inside of the cover. The numbers indicate the

following:

1 Protective cover

2 Shaving system

3 Release button

4 On/off switch

5 Charging indicator

6 Trimmer

7 Mains connection

SilverCrest SRR 3 A1

English - 5

Technical data

Operating voltage 220-240V

~

50Hz

Power consumption 4W

Protection class II

Charging time 60 minutes

Dimensions

approx. 53 x 140 x 59 mm

(W x H x D)

Weight approx. 173 g

Operating temperature 0 °C to +40 °C

Safety instructions

Before using the shaver for the first time, please read the following

instructions carefully and take note of the safety warnings, even if you are

familiar with the use of electronic devices. Store these instructions in a safe

place for future reference. If you sell the shaver or pass it on, always

include these instructions.

This symbol indicates important information for safe

operation of the shaver and the safety of the user.

This symbol indicates that the shaver is not watertight and

may not be used in the shower or bath.

This symbol indicates other important information on the

topic.

SilverCrest SRR 3 A1

6 - English

This shaver is not intended for use by persons (including children)

with limited physical, sensory or mental abilities or for those lacking

experience and/or knowledge unless they are supervised by a

person responsible for their safety or if this person has instructed them

on how to use the shaver correctly. Children should always be

supervised to ensure that they do not play with the shaver.

Small parts can be fatal if swallowed. Also note that there is a risk of

suffocation if air passages are blocked by the plastic packaging.

Keep the shaver out of the reach of children.

CAUTION! Keep the shaver dry.

The shaver is not watertight and may never be used in the shower or

bath. Furthermore, the shaver may never be completely immersed in

water. It poses an electric shock risk!

If the shaver falls into water, first unplug the mains cable from the

socket as there is a risk of an electric shock otherwise!

If you notice any smoke, unusual noises or strange odours, switch off

the shaver immediately and unplug the mains plug from the socket. In

these cases, the shaver should not be used until it has been inspected

by authorised service personnel. Never inhale smoke from a potential

device fire. If you have inhaled smoke, however, consult a doctor.

The inhalation of smoke can be harmful.

The shaver may not be damaged in order to avoid hazards.

SilverCrest SRR 3 A1

English - 7

Ensure that no fire sources (e.g. burning candles) are placed on or

near the shaver. It poses a fire hazard!

The shaver may not be exposed to any direct heat sources (e.g.

heating) or any direct sunlight or artificial light. Also ensure that the

shaver is not exposed to any excessive shocks or vibrations.

Furthermore, no foreign objects may penetrate the shaver. Otherwise,

the shaver could be damaged.

The shaver may not be exposed to extreme temperature fluctuations

as this could result in condensation and electrical short circuits.

Cables

Never touch the mains cable with wet hands as this may cause a

short circuit or an electric shock.

A damaged mains cable can cause a fire or an electric shock.

Inspect the mains cable from time to time. Do not use adapter plugs

or extension cables that do not comply with applicable safety

standards, and do not make any alterations to the mains cable!

Never place furniture or other heavy objects on the mains cable and

take care that the cable is not kinked, especially near the plug and

connection socket. Ensure that the mains cable is neither clamped nor

in contact with hot surfaces. Never tie a knot in the mains cable and

do not tie cables together. Ensure that all cables are placed so that

no one can trip over them and they do not cause an obstruction.

Always handle the mains cable by the connector and do not pull on

the cable itself.

SilverCrest SRR 3 A1

8 - English

Copyright

All information contained in these instructions is subject to copyright and is

provided for information purposes only.

It is only permitted to copy or duplicate data and information with the

express and written consent of the author. This also includes commercial

use of the content and data.

The text and illustrations are based on the state of the art at the time of

printing.

SilverCrest SRR 3 A1

English - 9

Prior to use

Remove the shaver and the accessories from the packaging.

Check the shaver for signs of damage. If damaged, the shaver may not be

used.

The shaver can be operated via a battery or mains supply.

Charging the battery

The shaver is equipped with an integrated environmentally friendly NiMH

high-performance battery. You can charge it with the supplied mains

cable.

To extend the built-in battery life, we recommend that you discharge

the battery fully before recharging it. The charging indicator [5]

flashes red when the battery is fully discharged.

To charge the battery, connect the mains cable to the mains connection

[7]. Then plug the other end of the mains cable into a mains socket. The

charging indicator [5] lights up red while charging. A full charge cycle

takes approximately 60 minutes. If charging is complete, the charging

indicator [5] flashes green. Then unplug the cable from the mains socket to

save energy.

SilverCrest SRR 3 A1

10 - English

First use

Only use the shaver for dry shaving.

Remove the protective cover [1]. Press the on/off switch [4] to switch on

the shaver. The switch frame lights up red during operation. Move the

shaver over your skin in circular motions while exercising slight pressure.

Always hold the shaver at a right angle to the skin. You can also hold the

skin taut with your other hand to raise your facial hair.

Please note that there may be a slight redness or irritation of the skin

after shaving. This is quite normal because your skin must first get

used to this manner of shaving. It may take two to three weeks for

your skin to get used to the shaver.

You can trim long facial hair or sideburns using the trimmer [6]. Pull out the

trimmer [6] to use it and push it back after use.

Switch off the shaver after shaving by pressing the on/off switch [4] off

again. After using the shaver, put the protective cover [1] back on the

shaving system [2]. Clean the shaver as described in the following section.

SilverCrest SRR 3 A1

English - 11

Cleaning / maintenance

Cleaning

Unplug the shaver from the mains power supply before cleaning as

there is a risk of an electric shock!

Switch off the shaver before cleaning it in order to avoid hazards.

Never immerse the shaver in water or other liquids. Otherwise, liquid

will penetrate it because the casing is not watertight.

Do not use compressed air, scouring pads or corrosive cleaning

agents to clean the shaver.

It is recommended that the shaver is cleaned after each use to achieve

optimal shaving results.

Cleaning after each use

Remove the protective cover [1]. Then clean the

shaving heads of the shaving system [2] with the

enclosed cleaning brush.

SilverCrest SRR 3 A1

12 - English

Press the release button [3] to open the shaving

system. Then clean the inside of the shaving

system [2] and the collection chamber with the

enclosed cleaning brush.

After cleaning, close the shaving system [2] again

until it audibly engages. Put the protective cover

[1] on again.

Cleaning every two months

Remove the protective cover [1]. Press the release

button [3] to open the shaving system.

SilverCrest SRR 3 A1

English - 13

By pulling, you prise the shaving head holder

from its locking mechanism. Then remove the

shaving head holder.

Remove the shaving heads. A shaving head

consists of a guard and a razor blade.

Always clean a guard with the corresponding razor blade because

they work together when the shaver is in use. The shaving results may

deteriorate if the guards and razor blades are interchanged.

Alternatively, you can rinse the shaving heads under running water.

Let the shaving heads dry completely before installing them.

Remove the razor blade from the guard. Then

clean the razor blade carefully with the enclosed

cleaning brush.

Clean the guard with the enclosed cleaning

brush.

SilverCrest SRR 3 A1

14 - English

Re-insert the razor blade in the guard.

Re-insert the clean shaving heads in the shaving

unit. Make sure that the slot in the shaving head

lies in the channel of the shaving unit.

Re-insert the shaving head holder in the shaving

unit. Press the centre of the shaving head holder

until it audibly engages.

After cleaning, close the shaving system [2] again

until it audibly engages. Put the protective cover

[1] on again.

SilverCrest SRR 3 A1

English - 15

Maintenance

Replace the shaving heads every two years to consistently achieve optimal

shaving results.

You can obtain information on spare parts via our service hotline (see

page 22).

Unplug the shaver from the mains power supply before maintenance

as there is a risk of an electric shock!

Switch off the shaver before maintenance in order to avoid hazards.

Proceed as follows to replace the shaving heads:

Remove the protective cover [1]. Press the release

button [3] to open the shaving system.

By pulling, you prise the shaving head holder

from its locking mechanism. Then remove the

shaving head holder.

SilverCrest SRR 3 A1

16 - English

Remove the shaving heads. A shaving head

consists of a guard and a razor blade.

Re-insert the new shaving heads in the shaving

unit. Make sure that the slot in the shaving head

lies in the channel of the shaving unit.

Re-insert the shaving head holder in the shaving

unit. Press the centre of the shaving head holder

until it audibly engages.

Close the shaving system [2] again until it audibly

engages. Put the protective cover [1] on again.

SilverCrest SRR 3 A1

English - 17

Environmental and disposal information

When this symbol appears on a product, this indicates

that the product is subject to the European Directive

2002/96/EC. All electrical and electronic devices must

be disposed of separately from household waste at

designated disposal points. Disposal of old devices in

this manner will prevent harm to the environment and

human health hazards. For further information

regarding disposal of old devices in accordance with

the directive, contact your local government office or

the retailer where you purchased the device.

Dispose of the packaging in an environmentally compatible manner.

Cardboard can be put out for municipal paper collections or brought to

public collection points for recycling. Films and plastic used for packaging

the device are collected by your local disposal services and disposed of in

an environmentally compatible manner.

Removing the battery

This shaver contains a built-in battery. Remove the battery before you

dispose of the shaver.

Unplug the shaver from the mains power supply before removing the

battery as there is a risk of an electric shock!

SilverCrest SRR 3 A1

18 - English

CAUTION! RISK OF INJURY!

Switch off the shaver before removing the battery.

Warning! The shaver is destroyed when the battery is removed.

Pull out the trimmer [6]. Remove the three screws

and open the casing.

Remove the battery (two rechargeable batteries)

from the board by severing the connections with a

wire cutter.

Stránka sa načítava ...

Silvercrest SRR 3 A1 Návod na obsluhu

Táto príručka je tiež vhodná pre

Silvercrest SRR 3 A1 Návod na obsluhu

V iných jazykoch

Súvisiace články

Ďalšie dokumenty