Parkside PLBS 30 A1 Operation and Safety Notes

IAN 71603

FINE SOLDERING IRON SET PLBS 30 A1

FINE SOLDERING IRON SET

Operation and Safety Notes

LUTOWNICA

Wskazówki dotyczące obsługi i bezpieczeństwa

FEINLÖTKOLBEN-SET

Bedienungs- und Sicherheitshinweise

KOMPLET FINEGA SPAJKALNIKA

Navodila za upravljanje in varnostna opozorila

JEMNÁ PÁJEČKA

Pokyny pro obsluhu a bezpečnostní pokyny

SÚPRAVA JEMNEJ SPÁJKOVAČKY

Pokyny pre obsluhu a bezpečnostné pokyny

GB Operation and Safety Notes Page 5

PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 21

SI Navodila za upravljanje in varnostna opozorila Stran 39

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 57

SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 73

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 89

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z

wszystkimi funkcjami urządzenia.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

1

2

3

8

7

4

5

A B

C D

10

3

119

5

4

6

12

2

5 GB

Table of contents

Introduction

Proper use ...............................................................................Page 7

Features and equipment .........................................................Page 8

Included items .........................................................................Page 8

Technical information .............................................................Page 8

Safety advice

1. Workplace safety ...............................................................Page 9

2.

Electrical safety ..................................................................Page 9

3. Personal safety ...................................................................Page 10

4. Careful handling and use of electrical power tools ........Page 12

Original accessories / attachments .......................................Page 13

Before first use

Fitting the helical spring .........................................................Page 13

Inserting / replacing soldering tips ........................................Page 13

Operation

Switching on and off ..............................................................Page 14

Third hand ...............................................................................Page 14

Solder sponge.........................................................................Page 14

Soldering .................................................................................Page 15

Maintenance and cleaning ..................................Page 16

Service centre .................................................................Page 17

Warranty ............................................................................Page 17

Disposal ................................................................................Page 18

Declaration of Conformity / Manufacturer

...Page 19

6 GB

Introduction

The following pictograms are used in these operating

instructions / on the device:

Read instruction manual!

Observe caution and safety notes!

Caution – electric shock! Danger to life!

Risk of explosion!

Risk of ﬁre!

Warning - Hot surfaces!

V

~

Volt (AC)

W

Watts (Eﬀective power)

Wear a breathing / dust mask, protective glasses,

gloves and clothing.

Keep children away from electrical devices!

Check that the device, mains lead and plug are in

good condition!

Do not smoke!

Do not eat!

7 GB

Introduction

Fine soldering iron set PLBS 30 A1

Q

Introduction

Please make sure you familiarise yourself fully with the way

the device works before you use it for the ﬁrst time and that

you understand how to handle it correctly. Please read the

operating instructions below. Be careful to keep these advice notes

and if necessary pass them on to a third party.

Q

Proper use

The appliance is intended for electronic soldering for leisure and DIY

purposes. It is designed for uses such as soldering work, wood-engrav-

ing, welding and gluing plastics and the application of decorations.

Use the device only as described and for the indicated purposes. The

device is not intended for commercial use. Any other use or modiﬁca-

tion to the device shall be considered as improper use and could give

rise to considerable dangers. The manufacturer will not accept

liability for loss or damage arising from improper use.

Do not drink!

Dispose packaging and appliance in an

environmentally-friendly way!

8 GB

Safety advice

Introduction

Q

Features and equipment

1

Soldering pencil

2

Soldering tip

3

Helical spring

4

Clips

5

Third hand

6

Holder for copper attachments

7

Multifunctional holder

8

Soldering sponge

9

Universal attachment

10

Pointed attachment

11

Conical attachment

12

Tin solder

Q

Included items

1 Fine soldering iron set PLBS 30 A1

1 Multifunctional holder

2 Rolls of soldering tin (10 grams each)

2 Soldering tips (1x installed)

4 Copper attachments (engraving tips)

1 Solder sponge

1 Operating instructions

Q

Technical information

Electricity supply: 230 V

~

Frequency: 50 Hz

Power consumption: 30 W

9 GB

Safety advice

CAUTION! Failure to observe the instructions and advice given

below may result in electric shock, ﬁre and/or serious injury.

1. Workplace safety

a) Keep your working area clean and well lit. Untidy or

poorly lit working areas can lead to accidents.

b)

Do not work with the device in potentially

explosive environments in which there are

inflammable liquids, gases or dusts. Electrical

power tools create sparks, which can ignite dusts or fumes.

c)

Keep children and other people away while

you are operating the electrical tool. Distrac-

tions can cause you to lose control of the device.

2. Electrical safety

To avoid danger to life from electric shock:

a)

The mains plug on the device must match

the mains sock-

et. The plug must not be modified in any way. Do not

use an adapter plug with devices fitted with a protec-

tive earth. Unmodiﬁed plugs and matching sockets reduce the

risk of electric shock.

b) Keep the device away from rain or moisture. Water en-

tering an electrical device increases the risk of electric shock.

Introduction

10 GB

Safety advice

c) Use a residual current device (RCD) for protection if

operating the electrical power tool in a moist environ-

ment is unavoidable. The use of an RCD reduces the risk of

electric shock.

d)

Do not use the mains lead for any purpose for

which it was not intended, e.g. to carry the

device, to hang up the device or to pull the

mains plug out of the mains socket. Keep the mains

lead away from heat, oil, sharp edges or moving parts

of the device. Damaged or tangled mains leads increase the

risk of electric shock.

e) Do not operate the device if the mains lead or mains plug is

damaged.

A damaged mains lead presents a serious

danger to life from electric shock.

f) Always keep the mains lead out of the operating area and run it

away from the rear of the device.

g) Always pull out the mains plug if you are about to leave the device

unattended or wish to carry out any tasks on the device.

3. Personal safety

a) Children or persons who lack the knowledge or expe-

rience to use the device or whose physical, sensory or

intellectual capacities are limited must never be al-

lowed to use the device without supervision or in-

struction by a person responsible for their safety. Chil-

dren must never be allowed to play with the device.

b) Remain alert at all times, watch what you are doing

and always proceed with caution. Do not use the

device if you are tired or under the influence of

11 GB

Safety advice

drugs, alcohol or medication. One moment of carelessness

when using the device can lead to serious injury.

DANGER OF BURNS! Never touch the hot soldering

tip or the molten solder. You could suﬀer burn injuries.

Always let the device cool before you replace components

on the device, clean it or check its condition.

After use let the soldering pencil cool down in air only. Under no

circumstances quench the tip in water!

CAUTION! DANGER OF FIRE! Place the soldering

pencil down only in the special multifunctional holder

or on a ﬁre-resistant pad.

Place the soldering pencil in the multifunctional holder during

pauses in your work.

Keep the device away from combustible material.

Never leave the device switched on and unattended.

CAUTION! DANGER OF INJURY! Keep your hands away

from the hot workpiece. The heat from soldering can be conducted

through the workpiece. For this reason you should use the third

hand to hold small workpieces.

Avoid placing the hot soldering tip in contact with the plastic parts

of the multifunctional holder. Failure to observe this advice may

result in damage to the device.

If a dangerous situation arises, pull the mains plug immediately

out of the mains socket.

CAUTION! DANGER OF POISONING! Do not breathe air

contaminated with soldering fumes.

When working with the device for long periods do not

allow the fumes from soldering to build up. They may

be hazardous to health. Always provide adequate

ventilation of your working area. In addition, it is recommended

that you wear protective gloves, a face mask and a protective

apron.

Safety advice

12 GB

Safety advice / Before first use

Safety advice

Do not eat, drink or smoke in rooms where soldering is carried

out. Otherwise your hands may transfer any adhering traces of

lead via food or cigarettes into your body.

Always wash your hands immediately after soldering .

Do not dispose of soldering waste with the household rubbish.

Soldering waste must disposed of as special waste.

4. Careful handling and use

of electrical power tools

a) When not in use always ensure that electrical power

tools are kept out of reach of children. Do not let any-

one use the device if he or she is not familiar with it

or has not read the instructions and advice. Electrical

power tools are dangerous when they are used by inexperienced

people.

b) Look after the device carefully. Check for broken

parts or parts that are damaged to the extent they

detrimentally affect the functioning of the device.

Have any damaged parts repaired before you use

the device. Many accidents have their origins in poorly main-

tained electrical tools.

13 GB

Safety advice / Before first use

Q

Original accessories / attachments

Use only the accessories detailed in the operating instructions. The

use of attachments or accessories other than those recommended

here could lead to you suﬀering an injury.

Q

Before ﬁrst use

Q

Fitting the helical spring

Insert the narrower end of the helical spring

3

into the opening

of the multifunctional holder

7

. Ensure that the outwardly bent

end of the helix points upwards and insert it into the recess provid-

ed for it in the multifunctional holder

7

(see arrow in Fig. B).

Push the helical spring

3

into the opening as far as it will go.

Turn the helical spring

3

clockwise to ﬁx the multifunctional

holder

7

in place.

Q

Inserting / replacing soldering tips

CAUTION! DANGER OF BURNS! Allow the soldering

pencil to heat up without a soldering tip.

Removal of a soldering tip

2

or a copper attachment

9

10

11

may only be done when the appliance has been switched oﬀ and

the soldering tip or attachment has cooled down.

All soldering tips and attachments have a screw thread and can,

therefore, be easily and quickly replaced on the soldering pencil

1

.

Turn the soldering tip or attachment anti-clockwise to remove it.

Turn the soldering tip or attachment clockwise to ﬁx it in place.

Safety advice

14 GB

Operation

Q

Operation

Q

Switching on and oﬀ

Switching on:

Insert the mains plug into a suitable mains socket.

Switching off:

Pull the plug out of the mains socket to switch oﬀ the device.

Q

Third hand

CAUTION! DANGER OF BURNS! The clips on the third

hand

5

can become hot while you are soldering the work-

piece.

1. Fold out the third hand

5

upwards.

2. Rotate the clips

4

until they are oriented in the required direction.

3. Clamp the workpiece between the two clips

4

.

Q

Solder sponge

CAUTION! The hot soldering tip

2

must never be placed in

contact with a dry solder sponge

8

, otherwise the solder sponge

may be damaged.

The solder sponge

8

is used to clean soldering tips.

Moisten the solder sponge

8

before you use it.

15 GB

Operation

Q

Soldering

— The soldering pencil has a rated output of 30 watts and is there-

fore ideal for electronics soldering.

— The design of the soldering pencil makes it especially suitable for

use where access is diﬃcult or for ﬁne soldering work.

— To achieve the best results use electronics solder 1.0 or 1.5 mm

diameter 60 % Sn, 40 % Pb. We recommend the use of soldering

paste (not soldering grease or soldering ﬂuid) as a ﬂux.

Clean the soldering tip

2

on the moist solder sponge

8

.

After cleaning the tip

2

it must be “tinned” (coated with solder).

This is done by melting solder on to the hot soldering tip

2

.

Guide the soldering tip

2

to the intended joint site and heat the joint.

Place the solder (with ﬂux) between the joint site and the tip

2

to melt it.

Continue to feed further solder until the whole joint has a covering

of solder.

Then quickly remove the soldering tip in order to avoid overheating

the molten solder.

Allow the solder to harden while not subjecting it to vibration or

movement.

Note: The ﬂux is either already contained in the solder or applied

separately. Ask the advice of the retailer when buying solder in or-

der to choose the most suitable solder for your intended purpose.

Attachments and applications:

ATTENTION! Do not carry out any special changes or repairs to the

electrics or other parts. Exceptions are permitted if the person carrying

out such changes or repairs is qualiﬁed or trained to do so.

Operation

16 GB

You can fashion and decorate various materials with your soldering

pencil. Remove the parts of the surface or engrave design elements

into it (see Fig. D).

You can carry out these decorations in, for example, wood, leather,

paper, papier mâché, smooth fabrics, thin plastics or candle wax.

Try every application out on surplus material and see if you get the eﬀect

you wish to have. This means you will avoid damaging the item you

wish to work on.

Universal attachment

9

:

E.g. for drawings with broad and thin lines on various materials

Pointed attachment

10

:

E.g. for details or shading in over large areas

Conical attachment

11

:

E.g. for dots, curves and handwriting, detailed work

Q

Maintenance and cleaning

RISK OF INJURY! Before you carry out any

work on the device always pull the mains plug out of the mains socket

and allow the device to cool.

Clean the device after you have ﬁnished using it.

Use a cloth and a little mild detergent for cleaning the device.

In no circumstances use sharp objects, or petrol, solvents or clean-

ing agents that might attack plastic.

Do not allow any liquids to enter the inside of the device.

Service centre / Warranty

Operation / Maintenance and cleaning

17 GB

Q

Service centre

Have your device repaired only by

qualified specialist personnel using original manufac-

turer parts only. This will ensure that your device remains safe

to use.

If the plug or mains lead needs to be

replaced, always have the replacement carried out

by the manufacturer or his service centre. This will ensure

that your device remains safe to use.

Q

Warranty

The warranty for this appliance is for 3 years from the

date of purchase. The appliance has been manufactured

with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the

event of a warranty claim, please make contact by tele-

phone with our Service Department. Only in this way can a

post-free despatch for your goods be assured.

The warranty covers only claims for material and maufacturing defects,

but not for transport damage, for wearing parts or for damage to frag-

ile components, e.g. buttons or batteries. This product is for private use

only and is not intended for commercial use.

The warranty is void in the case of abusive and improper handling, use

of force and internal tampering not carried out by our authorized ser-

vice branch. Your statutory rights are not restricted in any way by this

warranty.

Service centre / Warranty

Operation / Maintenance and cleaning

18 GB

The warranty period will not be extended by repairs made unter war-

ranty. This applies also to replaced and repaired parts. Any damage

and defects extant on purchase must be reported immediately after un-

packing the appliance, at the latest, two days after the purchase date.

Repairs made after the expiration of the warranty period are subject to

payment.

GB

Service Great Britain

Tel.: 0871 5000 720

(0,10 GBP/Min.)

e-mail: k[email protected]

IAN 71603

Q

Disposal

The packaging is wholly composed of environmentally-friendly

materials that can be disposed of at a local recycling centre.

Do not dispose of electrical devices

with the household rubbish!

In accordance with European Directive 2002 / 96 / EC (covering

waste electrical and electronic equipment) and its transposition into

national legislation, worn out electrical devices must be collected

separately and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to

dispose of your worn-out devices.

Declaration of Conformity / Manufacturer

Warranty / Disposal

19 GB

Q

Declaration of Conformity / Manufacturer

We, Kompernaß GmbH, the person responsible for documents:

Mr Semi Uguzlu, Burgstr. 21, D-44867 Bochum, Germany, hereby

declare that this product complies with the following standards, norma-

tive documents and EU directives:

EU Low Voltage Directive

(2006 / 95 / EC)

Electromagnetic Compatibility

(2004 / 108 / EC)

Applicable harmonized standards

EN 60335-2-45/A1:2008

EN 60335-1/A13:2008

EN 62233:2008

EN 55014-1/A1:2009

EN 61000-3-2/A2:2009

EN 61000-3-3:2008

EN 55014-2/A2:2008

Type / Device description:

Fine soldering iron set PLBS 30 A1

Date of manufacture (DOM): 12–2011

Serial number: IAN 71603

Declaration of Conformity / Manufacturer

Warranty / Disposal

20 GB

Declaration of Conformity / Manufacturer

Bochum, 31.12.2011

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical modiﬁcations in the course of

further development.

Spis zawartości

Stránka sa načítava ...

Parkside PLBS 30 A1 Operation and Safety Notes

Parkside PLBS 30 A1 Operation and Safety Notes

V iných jazykoch

Súvisiace články

Ďalšie dokumenty