Silvercrest SBTF 10 B2 Operating Instructions Manual

Značka: Silvercrest

Model: SBTF 10 B2

Typ: Operating Instructions Manual

IAN 78534

BLUETOOTH

HANDS-FREE KIT SBTF 10 B2

BLUETOOTH

FREISPRECH-

EINRICHTUNG

Bedienungsanleitung

HANDSFREE SADA S

FUNKCIOU BLUETOOTH

Návod na obsluhu

BLUETOOTH

HANDSFREE

Návod k obsluze

BLUETOOTH

NAPRAVA

ZA PROSTOROČNO

TELEFONIRANJE

Navodila za uporabo

BLUETOOTH

HANDS-FREE KIT

Operating instructions

GB Operating instructions Page 1

SI Navodila za uporabo Stran 15

CZ Návod k obsluze Strana 29

SK Návod na obsluhu Strana 43

DE / AT / CH Bedienungsanleitung Seite 57

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi

funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se

všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznám-

te so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und

machen Sie sich anschließend mit allen Funktionen des Gerätes

vertraut.

SBTF 10 B2

Content

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Correct Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operating Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the hands-free appliance in a vehicle . . . . . . . 6

Switching the hands-free appliance on and oﬀ . . . . . . . 6

Coupling the hands-free appliance

with a mobile telephone . . . . . . . . . . . . . . . . . . . . . . . . . 7

Coupling the hands-free appliance

with several mobile telephones . . . . . . . . . . . . . . . . . . . . 8

Separating the connection . . . . . . . . . . . . . . . . . . . . . . . 9

Re-establishing the connection . . . . . . . . . . . . . . . . . . . . 9

Using the hands-free appliance . . . . . . . . . . . . . . . . . . . 9

Charging 5 V Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Warranty & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Declaration of EU Conformity . . . . . . . . . . . . . . . . . . . . 14

IB_78534_SBTF10B2_LB4.indb 1IB_78534_SBTF10B2_LB4.indb 1 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a quality product.

These operating instructions are a part of this product.

They contain important information in regard to safety, use

and disposal. Before using the product, familiarise your-

self with all of these operating and safety instructions. Use

the product only as described and only for the speciﬁ ed

areas of application. In addition, pass these documents

on, together with the product, to any future owner.

Safety instructions

Symbol deﬁ nitions:

This symbol points out the particular risks associated

with handling, operation or manipulation.

This symbol stands for special tips and operating

instructions.

T r a ﬃ c safety has priority!

● Comply with all local laws. When driving, your hands

must ALWAYS be free to operate the vehicle safely.

Traﬃ c safety must ALWAYS take priority whilst driving.

● Only manipulate the hands-free appliance on those

occasions in which the traﬃ c situation permits it and in

which you will not endanger, injure, obstruct or cause

annoyance to other road users.

● Do not permit your concentration on the road traﬃ c to

be compromised by the manipulation and displays of

the handsfree appliance!

● Become familiar with the operation of it before driving

oﬀ and practice the safe operation of the facility!

● Install the hands-free appliance in the vehicle such that

your view is not obstructed and that the appliance is

not located in an impact zone in the passenger com-

partment or in the inﬂ ation area of airbags.

IB_78534_SBTF10B2_LB4.indb 2IB_78534_SBTF10B2_LB4.indb 2 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

General safety instructions

● Do not attempt to open or repair the appliance. Should

you do so, appliance safety can no longer be assured

and the warranty becomes void.

● Have the defective device repaired by customer ser-

vice or an authorised specialist only. No liability will

be accepted for damage caused by misuse, improper

handling, use of force or unauthorized modiﬁ cation.

● Never subject the appliance to moisture, extreme

temperatures or extreme vibrations.

● Do not allow children and people subject to supervision

play with the appliance, they could injure themselves

or cause damage to the appliance.

Connection to other mobile telephones

● If you wish to connect the appliance to another appli-

ance, read the operating instructions to obtain detailed

safety instructions. Do not connect it to a product that

is not compatible.

High frequency signals in vehicles

HF signals can, under circumstances, negatively inﬂ uence the

function of not properly installed or not suﬃ ciently shielded

electronic systems in vehicles, e.g. electronic ABS, electronic

tempo controllers and airbag systems. For further informa

tion about your vehicle or its possible ancillaries make

contact with the respective manufacturer or their repre-

sentative.

Correct Usage

The Bluetooth

Hands-Free Kit SBTF 10 B2 is designed

for use in vehicles with a voltage of 12-24 V. The hands-

free phone system uses both Bluetooth

radio technology

aswell as a digital signal processor (DSP) to carry out

telephone functions. In addition, mobile devices with an

operating voltage of 5V

(MP3 players, cell phones,

etc.) can be charged via the USB port.

IB_78534_SBTF10B2_LB4.indb 3IB_78534_SBTF10B2_LB4.indb 3 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

This device may be used ONLY for private domestic pur-

poses, not for industrial or commercial applications. The

product at hand is, by default, NOT intended for use in

medicinal, lifesaving or life support applications. All of the

additional connecting cables and external devices used

MUST match the safety-related, electromagnetic compata-

bility and shielding quality standards of the device at hand.

This appliance is not intended for any other use or for uses

beyond those mentioned. Claims of any kind for damage

resulting from unintended use will not be excepted. The

operator alone bears liability.

Introduction

Bluetooth

is a wireless communication system with a

short range. It makes possible wireless connections be-

tween Bluetooth

appliances, such as for example mobile

telephones, PDA and PCs. Bluetooth

relates itself to a

worldwide standard for operation in the internationally

recognised ISM Frequency Range (Industrial, Scientiﬁ c

and Medical). Within the ISM Frequency Range (2.402 -

2.480 GHz), a data transfer range of ca. 10 meters (class II)

is achieved. The disturbance susceptibility through other

users of the ISM Frequency Range, such as for example

microwaves, WLAN (802.116) or garage door openers,

is minimised by so-called “Frequency-Hopping“. With

Frequency-Hopping, a change of frequency levels takes

place at up to 1600 times per second, thereby Bluetooth

is also reckoned to be relatively tap-proof.

Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

The HSP (Headset-Proﬁ l) makes possible standard func-

tions such as voice transference, as well as the accept-

ance and rejection of calls.

The HFP (Handsfree-Proﬁ l) makes possible the hands-free

call functions of a mobile telephone, for example with the

help of voice commands.

IB_78534_SBTF10B2_LB4.indb 4IB_78534_SBTF10B2_LB4.indb 4 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Items supplied

Bluetooth

Hands-Free Kit

Operating instructions

Technical data

Operational voltage: 12-24 V

/ 1000 mA

Bluetooth

Speciﬁ cation: Version 3.0 + EDR,

up to a range of 10 meters

Supported Bluetooth

proﬁ les: HSP and HFP

Output Voltage USB port: 5 V

/ 1 A

Fuse: F2AL / 250 V

Dimensions (L x W x H): 15,7 x 5,3 x 2,3 cm

Weight: 67 g

Operational temperature: +15° to +40°C

Humidity: 5 to 75%

(no condensation)

Operating Elements

1 Vehicle connector plug

2 Microphone

3 +/- Buttons

4 USB port

5 Loudspeakers

6 LED status indicator

7 Multi-function button

IB_78534_SBTF10B2_LB4.indb 5IB_78534_SBTF10B2_LB4.indb 5 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Installing the hands-free appliance

in a vehicle

So that the hands-free appliance can function correctly, it

is connected to the vehicle cigar lighter socket or on-board

power socket and provided with electricity from there.

● Ensure that the hands-free appliance engages completely

and that the operation of the vehicle is not negatively

inﬂ uenced. The LED status indicator 6 blinks twice every

3 seconds and a short high signal tone sounds once. The

appliance is in standby mode.

Note:

It is possible that the cigar lighter only functions when the

vehicle ignition is switched on. In cases of doubt, consult

the operating instructions for the particular vehicle.

Caution:

For vehicles in which the cigar lighter, resp. the vehicle cir-

cuit plug, also functions when the ignition is switched oﬀ :

● Use the hands-free appliance only when the motor is

running. Otherwise, the vehicle batteries could become

discharged over an extended period of time.

Note:

When you are not using the hands-free equipment remove

it from the vehicles cigarette lighter socket. Store it in a dry,

dust free location protected from direct sunlight.

Switching the hands-free

appliance on and oﬀ

Switching on: The appliance is switched oﬀ .

● Press and hold the multi-function button 7 for 3 seconds,

until a short and high signal tone is heard. The LED

status indicator 6 blinks twice every 3 seconds.

Switching oﬀ : The appliance is in standby mode.

● Press and hold the multi-function button 7 for 3 seconds,

until a long and deep signal tone is heard. The LED

status display 6 extinguishes.

IB_78534_SBTF10B2_LB4.indb 6IB_78534_SBTF10B2_LB4.indb 6 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Coupling the hands-free appliance

with a mobile telephone

The hands-free appliance has been especially developed

for mobile telephones that support the Bluetooth

Proﬁ le

“Handsfree (HFP) and Headset (HSP)“. Further informa-

tion about Bluetooth

radio technology is to be found in

the operating instructions for your mobile telephone.

Before you can use the hands-free appliance, you must

connect it with a compatible mobile telephone (pairing).

● Check to make sure the mobile telephone is switched on.

● Programme the mobile telephone so that it searches

for Bluetooth

appliances. A detailed description of

how to do this is to be found in the operating instruc-

tions for your mobile telephone.

● Ensure that the hands-free appliance is correctly set up

and switched oﬀ .

● To switch the device oﬀ , press and hold the multi-function

button 7 for about 3 seconds. A long, low signal tone

will be heard and the LED status display 6 extinguishes.

● Position the hands-free appliance and the mobile tele-

phone so that they are not more than 1 metre away

from each other.

● Press and hold down the multi-function button 7 for 6

seconds until, after 3 seconds a short, high signal tone

and after a further 3 seconds a succession of low and

high signal tones are heard. The LED status display 6

lights up constantly and the hands-free equipment is

now in the coupling mode.

● Select the hands-free provision “Car Kit“ from the list of

available appliances for the mobile telephone.

● Enter in the pre-programmed passcode “9999“ and

then conﬁ rm it, which couples the appliances with each

other. You will hear a long high signal tone and the

LED status indicator 6 blinks every 3 seconds.

● You can now use the hands-free appliance.

IB_78534_SBTF10B2_LB4.indb 7IB_78534_SBTF10B2_LB4.indb 7 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Note:

When using the latest mobile phones, (Smartphones) those

that are equipped with Bluetooth 2.0 or a more modern

version, it is possible that the pass code “9999“ need not

be entered. If the coupling is not completed within 2 min-

utes, the hands-free appliance switches itself oﬀ . The LED

status display 6 extinguishes and you will hear a long

and deep signal tone. With some mobile telephones it is

possible that coupling does not automatically take place.

In this case coupling must be carried out additionally on

the mobile telephone. The LED status display 6 blinks

twice every 3 seconds until this has been carried out. Fur-

ther information can be found in your mobile telephone’s

operating instructions.

Coupling the hands-free appliance

with several mobile telephones

You can couple the hands-free appliance with up to eight

mobile telephones. However, it can only be connected

with one mobiletelephone. If a further mobile telephone

is coupled with the hands-free appliance, the coupling in-

formation of the ﬁ rst coupled mobile telephone is erased.

When the hands-free appliance is switched on, within a

few seconds it attempts to make a connection to the last

used mobile phone. Should a connection not be possible,

the hands-free appliance nonetheless remains recognis-

able for other mobile telephones. To use the hands-free

appliance with a linked mobile phone that is not the last

used mobile phone, the connection must be made via the

Bluetooth

menu of the mobile phone.

IB_78534_SBTF10B2_LB4.indb 8IB_78534_SBTF10B2_LB4.indb 8 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Separating the connection

If you wish separate the mobile telephone from the hands-

free appliance, for example, to connect it to another

Bluetooth

appliance:

● Switch the hands-free appliance oﬀ

● separate the connection over the Bluetooth

menu in

the mobile telephone.

You need not erase the coupling with the hands-free appli-

ance in the Bluetooth

menu to separate the connection.

Re-establishing the connection

If you want to reconnect the hands-free appliance with the

last used mobile phone:

● Check to see that Bluetooth

is activated in the mobile

telephone, then switch the hands-free appliance on.

When connecting to a previously coupled mobile telephone

it is not necessary to enter a pass-code. You can set your

mobile telephone so that when the hands-free equipment is

switched on a connection with the mobile telephone is auto-

matically established. As soon as the hands-free equipment

is connected to the previously coupled mobile telephone a

short, high signal tone is emitted conﬁ rming the connection.

Further information regarding automatic coupling can be

found in your mobile telephone’s operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are

available to you. Some of the described functions are

only possible with a mobile telephone that supports the

Handsfree Proﬁ le (HFP).

Call function

● Use your mobile telephone in the usual way to make a call.

● For redialing of the last number called, shortly press

the multi-function button 7 twice.

● For activation of voice dialling, shortly press the multi-

function button 7 once.

IB_78534_SBTF10B2_LB4.indb 9IB_78534_SBTF10B2_LB4.indb 9 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Note:

Voice dialing is only available with mobile telephones that

support this function. Further information regarding voice

dialing is to be found in the operating instructions for your

mobile telephone.

Accepting and ending a call

When you receive a call the LED status display 6 blinks

and you hear a call tone from the hands-free appliance.

If the call signal in your mobile phone is switched oﬀ , the

ringing tone is nonetheless sounded via the hands-free

appliance.

● Press the multi-function button 7 shortly once,

to accept the call.

● Press the multi-function button 7 shortly once,

to terminate the accepted call.

You can also accept and terminate the call over the

mobile telephone.

Automatic call acceptance

If automatic call acceptance is activated in the mobile

telephone, it accepts the incoming call after a determined

time period and then passes it on to the hands-free

appliance. Further information regarding automatic call

acceptance is to be found in the operating instructions for

your mobile telephone.

Rejection of a call

● Press the multi-function button 7 for 3 seconds to

reject an incoming telephone call.

Adjusting the volume of the hands-free appliance

You can adjust the sound volume level of the hands free

device with the +/- buttons 3.

● During a call, repeatedly press the + resp. - buttons 3

until the desired sound volume level is obtained. The

attainment of the maximum sound volume level is indi-

cated by a short signal tone.

IB_78534_SBTF10B2_LB4.indb 10IB_78534_SBTF10B2_LB4.indb 10 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Charging 5 V Devices

● Check the max. input voltage (5V) and the max. power

input (1000 mA) of the device which you want to charge.

For this, consult the operating manual of the device.

● Connect the device to be charged with the USB port 4

on the hands free device. The device now receives its

power supply from the hands free device. If the device

is equipped with a charging indicator light, this will in-

dicate that the device is being charged.

Troubleshooting

If you cannot connect the hands-free appliance with a

compatible mobile telephone, proceed as follows:

● Ensure that the Bluetooth

function in the mobile

telephone is activated.

● Ensure that the hands-free appliance is correctly

installed, switched on and supplied with electricity.

● If you use several Bluetooth

appliances, ensure that

a previously created Bluetooth

connection of the

mobile telephone is separated.

● Ensure that the hands-free appliance is distanced a ma-

ximum of 10 metres from the mobile telephone and that

there are no barriers or electronic devices between them.

If these measures do not correct the problem, please con-

tact the appropriate service partner for your country.

Cleaning and Care

Danger of electrocution!

● Before cleaning, always separate the electricity supply

from the appliance!

● NEVER submerse the appliance in water or other liquids!

● Do not permit liquids to permeate into the housing!

● Never open the housing of the appliance! There are

no user-serviceable elements inside.

IB_78534_SBTF10B2_LB4.indb 11IB_78534_SBTF10B2_LB4.indb 11 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

● Do not use strong detergents, solvents or abrasive

cleaning agents to clean the appliance. These could

damage the housing surfaces.

● Clean the housing surfaces with a slightly moist soft cloth.

Disposal

Do not dispose of the appliance in your

normal domestic waste. This product is

subject to the European guideline

2002/96/EC.

Dispose of the appliance through an approved disposal

centre or at your community waste facility. Observe the

currently applicable regulations. In case of doubt, please

contact your waste disposal centre.

Dispose of all packaging materials in an

environmentally responsible manner.

Warranty & Service

The warranty for this appliance is for 3 years from the

date of purchase. The appliance has been manufactured

with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the

event of a warranty claim, please make contact by

telephone with our Service Department. Only in this way

can a post-free despatch for your goods be assured.

The warranty covers only claims for material and

manufacturing defects, but not for transport damage, for

wearing parts or for damage to fragile components, e.g.

buttons or batteries. This product is for private use only

and is not intended for commercial use.

The warranty is void in the case of abusive and improper

handling, use of force and internal tampering not carried

out by our authorized service branch. Your statutory rights

are not restricted in any way by this warranty.

IB_78534_SBTF10B2_LB4.indb 12IB_78534_SBTF10B2_LB4.indb 12 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

The warranty period will not be extended by repairs

made under warranty. This applies also to replaced and

repaired parts. Any damage and defects extant on pur-

chase must be reported immediately after unpacking the

appliance, at the latest, two days after the purchase date.

Repairs made after the expiration of the warranty period

are subject to payment.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: [email protected]

IAN 78534

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: [email protected]

IAN 78534

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

IB_78534_SBTF10B2_LB4.indb 13IB_78534_SBTF10B2_LB4.indb 13 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Declaration of EU Conformity

We, Kompernaß GmbH, Burgstraße 21, D-44867 Bochum,

hereby declare that the product SBTF 10 B2 Bluetooth

hands-free Kit complies with the essential requirements and

other relevant provisions of the Motor Vehicle Directive

2004/104/EC, the R&TTE Directive 99/5/EC, the Low

Voltage Directive 2006/95/EC and the RoHS Directive

2011/65/EU.

Related harmonised standards:

EN 60950-1:2006 + A11:2009

ETSI EN 300 328 V1.7.1:2006

ETSI EN 301 489-1 V1.8.1:2008

ETSI EN 301 489-17 V2.1.1:2009

EN 50371:2002

ISO 7637-2:2004

Bochum, 10.08.2012

Semi Uguzlu

Quality Manager

IB_78534_SBTF10B2_LB4.indb 14IB_78534_SBTF10B2_LB4.indb 14 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Kazalo

Varnostni napotki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Predvidena uporaba . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Uvod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Vsebina kompleta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Tehnični podatki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Elementi za upravljanje . . . . . . . . . . . . . . . . . . . . . . . . . 19

Namestitev naprave za prostoročno

telefoniranje v vozilo . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Vklop in izklop naprave za

prostoročno telefoniranje . . . . . . . . . . . . . . . . . . . . . . . 20

Povezava naprave za prostoročno

telefoniranje z mobilnim telefonom . . . . . . . . . . . . . . . . 21

Povezava naprave za prostoročno

telefoniranje z več mobilnimi telefoni . . . . . . . . . . . . . . 22

Prekinitev povezave . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Ponovna vzpostavitev povezave . . . . . . . . . . . . . . . . . . 23

Uporaba naprave za prostoročno telefoniranje . . . . . . . . 23

Polnjenje drugih naprav z napetostjo 5 V . . . . . . . . . . . 25

Odprava napak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Čiščenje in vzdrževanje . . . . . . . . . . . . . . . . . . . . . . . . 26

Odstranitev neuporabnega izdelka . . . . . . . . . . . . . . . 26

Proizvajalec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Servis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Garancijski list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

EU-izjava o skladnosti . . . . . . . . . . . . . . . . . . . . . . . . . . 28

IB_78534_SBTF10B2_LB4.indb 15IB_78534_SBTF10B2_LB4.indb 15 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Iskrene čestitke ob nakupu vaše nove naprave.

Odločili ste se za kakovosten izdelek. Ta navodila za upo-

rabo so sestavni del vašega izdelka. Vsebujejo pomembne

napotke za njegovo varnost, uporabo in odstranitev. Preden

izdelek začnete uporabljati, si preberite vse napotke za nje-

govo varno uporabo. Izdelek uporabljajte samo na opisani

način in le za navedena področja uporabe. Ob predaji

naprave tretji osebi zraven priložite tudi vso dokumentacijo.

Varnostni napotki

Pomen simbolov:

ta znak opozarja na posebne nevarnosti pri ravna-

nju, delovanju in uporabi.

ta znak oznaãuje posebne nasvete in navodila za

uporabo.

Prometna varnost je najpomembnejša!

● Upoštevajte vse krajevno veljavne zakone. Roke

morajo biti med vožnjo vedno proste, da lahko z njimi

upravljate vozilo. Prometna varnost mora imeti med

vožnjo vedno prednost.

● Napravo za prostoročno telefoniranje uporabljajte le v

primerih, ko vam to omogočajo razmere v prometu in

pri tem ne ogrožate, ne ovirate, ne nadlegujete in ne

škodujete drugim udeležencem v prometu.

● Poskrbite, da uporaba in prikazi naprave za prostoroč-

no telefoniranje ne bodo odvrnili vaše pozornosti od

dogajanja na cesti!

● Pred začetkom vožnje se seznanite z uporabo in vadite

varno uporabo naprave za prostoročno telefoniranje!

● Napravo za prostoročno telefoniranje v vozilo namesti-

te tako, da ne bo motila vašega vidnega polja in ne

bo nameščena na mestih, v katera bi lahko udarili

potniki v vozilu, ali v območju odpiranja avtomobilske

varnostne blazine.

IB_78534_SBTF10B2_LB4.indb 16IB_78534_SBTF10B2_LB4.indb 16 20.08.12 09:2120.08.12 09:21

SBTF 10 B2

Splošna navodila za varno uporabo

● Naprave ne poskušajte odpirati ali popravljati. V tem pri-

meru varnost ni več zagotovljena in jamstvo preneha veljati.

● Pokvarjeno napravo zaupajte v popravilo le servisni

službi ali pooblaščenim strokovnjakom. Za škodo, na-

stalo zaradi zlorab ali nepravilnega ravnanja, zaradi

uporabe sile ali nepooblaščenih sprememb ni mogoče

prevzeti nobenega jamstva.

● Naprave ne imejte na mokrem in na ekstremnih tempe-

raturah ter preprečite močne tresljaje in sunke.

● Poskrbite, da se otroci in osebe, ki potrebujejo nadzor

drugih, ne bodo igrali z napravo, ker lahko poškoduje-

jo sebe ali napravo.

Priklop na druge mobilne telefone

● Če napravo priklopite na drugo napravo, preberite na-

vodila slednje, da se seznanite s podrobnimi navodili

za varno uporabo. Na napravo ne priklapljajte nobe-

nih izdelkov, ki niso združljivi z njo.

Visokofrekvenčni signali v vozilih

Visokofrekvenčni (HF) signali utegnejo motiti delovanje ne-

pravilno nameščenih ali ne dovolj izoliranih elektronskih

sistemov v motornih vozilih, na primer elektronski sistem

ABS, elektronski regulator hitrosti in sisteme varnostnih bla-

zin. Za več informacij o vašem vozilu ali morebitni opremi

se obrnite na izdelovalca ali zastopnika znamke vozila ali

opreme.

Predvidena uporaba

Bluetooth

naprava za prostoročno telefoniranje SBTF 10 B2

je predvidena za uporabo v vozilih z električno nape-

tostjo 12 do 24 V v vozilu. Naprava za prostoročno

telefoniranje za izvajanje klicnih funkcij uporablja radijsko

tehnologijo Bluetooth

ter digitalni procesor signalov

(DSP). V vtičnici USB je mogoče polniti tudi prenosne

naprave, ki se polnijo z napetostjo 5 V

(predvajalniki

MP3, mobilni telefoni, itd.).

IB_78534_SBTF10B2_LB4.indb 17IB_78534_SBTF10B2_LB4.indb 17 20.08.12 09:2120.08.12 09:21

Stránka sa načítava ...

Silvercrest SBTF 10 B2 Operating Instructions Manual

Značka: Silvercrest

Model: SBTF 10 B2

Typ: Operating Instructions Manual

Stiahnite si PDF

správa

V iných jazykoch

English: Silvercrest SBTF 10 B2
Deutsch: Silvercrest SBTF 10 B2

Silvercrest SBTF 10 B2 Operating Instructions Manual

Silvercrest SBTF 10 B2 Operating Instructions Manual

V iných jazykoch

Súvisiace články

Ďalšie dokumenty