Copyright © 2019, Fast ČR, a. s. Revision 05/2019
8
EN
PART 3: SPECIAL SAFETY INSTRUCTIONS
1. The kettle must be placed on a stable, flat and dry surface.
2. Before first use fill the kettle up to the maximum level, boil the water, pour it out and rinse the kettle.
Repeat the procedure several times to remove manufacturing deposits, etc.
3. The kettle turns off automatically when the water has boiled. If necessary you may turn it off using
Start/Cancel (10).
4. After the water has boiled or the kettle has been switched off, wait several seconds before switching
it on again.
5. If you switch the kettle on without water, the overheat protection will automatically shut the
appliance off. Leave the kettle to cool down for about 15 minutes before refilling.
PART 4: FIRST USE OF THE MACHINE
Before the rst time using, please boil up the water for twice without any additives.
1. Before filling with water, remove the kettle from the base (5).
2. Open the lid and fill the kettle with water up to the desired level (between 0,5 l and 1,7 l).
3. After plugging the base to the power outlet, the display turns on for a moment, all buttons are lit
and the appliance beeps once and the Start/Cancel button (10) keep slowly flashing which means
that the base is connected to the power source and the kettle is placed on the base.
4. Close the lid and place the kettle on the power base (5), the appliance beeps once. Then display will
turn on and off. After pressing the start heating/cancel heating button the current temperature will
appear on the LED display. If no operation is performed, the kettle will turn off automatically.
5. Press the Start/Cancel button (10) without setting other functions. The kettle turns on, the Start/
Cancel button will be lit white. The kettle boils water up to 100°C, then switches off automatically
and beeps once.
6. If you just want to heat up the water, use the boiling temperature buttons „up” or „down”. Press
once to change the temperature. The temperature setting will be shown on the display. You may
select between the pre-defined temperature settings: from 30°C up to 100°C each 5°C. By pressing
the start heating/cancel heating button(10) you will confirm your settings and the kettle will start
heating. If the temperature set is lower than the temperature of water in the kettle, the kettle
switches off.
7. After reaching the desired temperature of water, the kettle switches off and beeps once.