Dell Latitude L400 Užívateľská príručka

Pokročilý replikátor portů Dell Latitude L400 - UŽIVATELSKÁ PŘÍRUČKA

Zaawansowany replikator portów Dell™ Latitude™ L400 - PODRĘCZNIK UŻYTKOWNIKA

- —Œ¤”Õ”’Ã◊Õ” –”‘÷Ÿ”Õœ◊›‘„

www.dell.com

support.dell.com



USER’S GUIDE

Notes, Notices, and Cautions

Throughout this guide, blocks of text may be accompanied by an icon and printed in

bold type or in italic type. These blocks are notes, notices, and cautions, and they are

used as follows:

NOTE: A NOTE indicates important information that helps you make better use of

your computer system.

NOTICE: A NOTICE indicates either potential damage to hardware or loss

of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates the potential for bodily harm and tells you

how to avoid the problem.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Computer

Corporation is strictly forbidden.

Trademarks used in this text: Dell,theDELL logo, Latitude,andDellWare are trademarks of Dell

Computer Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell disclaims any proprietary interest in

trademarks and trade names other than its own.

March 2001 P/N 3C767 Rev. A01

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-3

Dell™ Latitude™ L400

Advanced Port Replicator

User’s Guide

The Dell Latitude L400 Advanced Port Replicator (APR) integrates your Dell Latitude

L400 computer quickly and easily into a desktop environment. Use the instructions in

this document to attach external devices to the APR and to connect your computer to

the APR.

Safety Instructions

Use the following safety guidelines to help protect your APR from potential damage

and to help ensure your own personal safety:

• Do not attempt to service the APR yourself. Always follow installation

instructions closely.

• Be sure that nothing rests on your AC adapter’s power cable and that the cable is

not located where it can be tripped over or stepped on.

• Place the AC adapter in a ventilated area, such as a desk top or on the floor,

when powering the APR. Do not cover the AC adapter with papers or other items

that will reduce cooling. Do not use the AC adapter inside a carrying case.

• Do not use your APR in a wet environment, for example, near a bathtub, sink, or

swimming pool or in a wet basement.

• Do not push objects into air vents or openings of your APR. Doing so can cause

fire or electric shock by shorting out interior components.

• Use only the AC adapter that is approved for use with this APR as indicated in

this document. Use of another type of AC adapter may risk fire or explosion.

• Before you connect the APR to a power source, ensure that the voltage rating of

the AC adapter matches that of the available power source:

— 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far

Eastern countries such as South Korea and Taiwan

1-4 Dell Latitude L400 Advanced Port Replicator User’s Guide

— 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan

— 230 V/50 Hz in most of Europe, the Middle East and the Far East

• To help prevent electric shock, plug the AC adapter and peripheral power cables

into properly grounded power sources. These cables are equipped with

three-prong plugs to help ensure proper grounding. Do not use adapter plugs or

remove the grounding prong from a cable. If you must use an extension cable,

use a three-wire cable with properly grounded plugs.

• If you use an extension cable with your AC adapter, ensure that the total ampere

rating of the products plugged into the extension cable does not exceed the

ampere rating of the extension cable.

• To remove power from the APR, turn off the computer and disconnect the AC

adapter from the electrical outlet.

• If your computer includes an integrated or optional (PC Card) modem, the cable

used with the modem should be manufactured with a minimum wire size of 26

American wire gauge (AWG) and an FCC-compliant RJ-11 modular plug.

• Disconnect the modem cable during an electrical storm to avoid the remote risk

of electric shock from lightning via the telephone line.

• To help avoid the potential hazard of electric shock, do not connect or disconnect

any cables or perform maintenance or reconfiguration of this product during an

electrical storm.

• When setting up the APR for work, place it on a level surface.

• Protect your APR from environmental hazards such as dirt, dust, food, liquids,

temperature extremes, and overexposure to sunlight.

• When you move your APR between environments with very different

temperature or humidity ranges, condensation may form on or within the

computer. To avoid damaging the APR, allow sufficient time for the moisture to

evaporate before using the computer.

NOTICE: When taking the APR from low-temperature conditions into a

warmer environment or from high-temperature conditions into a cooler

environment, allow the APR to acclimate to room temperature before

turning on power.

• When you disconnect a cable, pull on its connector or on its strain-relief loop, not

on the cable itself. As you pull out the connector, keep it evenly aligned to avoid

bending any connector pins. Also, before you connect a cable make sure both

connectors are correctly oriented and aligned.

• HandletheAPRwithcare.

• Before you clean your APR, shut down the computer and disconnect it from the

APR. Then unplug the APR from its power source.

• Clean your APR with a soft cloth dampened with water rather than with liquid or

aerosol cleaners.

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-5

• If your APR or computer gets wet or is damaged, follow the procedures

described in “Troubleshooting Your Computer,” in the User’sGuide. If, after

following these procedures, you confirm that your APR or computer is not

operating properly, contact Dell. (See “Getting Help,” in the User’s Guide for the

appropriate telephone number.)

Connecting External Devices to the APR

The input/output (I/O) connectors on the back of the APR duplicate the primary

connectors on the back and side of your computer. Table 1-1 shows the icons for each

of the connectors on the back of the APR and indicates the type of external device(s)

that can be attached to each connector.

Table 1-1. External Connectors

The AC adapter that came with the APR connects to the AC

adapter connector.

A serial device, such as a serial mouse, connects to the

serial connector.

A microphone connects to the microphone connector.

A speaker or headphones connect to the line-out connector.

A network interface cable connects to the NIC connector.

A USB device, such as a USB mouse, connects to the USB

connector.

An external phone line connects to the modem connector.

An external monitor connects to the monitor connector.

A parallel device, such as a printer, connects to the parallel

connector.

An external Personal System/2 (PS/2)-compatible mouse

connects to the PS/2 mouse connector.

An external PS/2-compatible keyboard or external numeric

keypad connects to the PS/2 keyboard connector.

An external CD-ROM, DVD-ROM, CD-RW, Zip 250, or

diskette drive connects to the external media bay connector.

1-6 Dell Latitude L400 Advanced Port Replicator User’s Guide

Use the following instructions to attach external devices to the APR.

NOTICE: The NIC and the two PS/2 connectors on the back of the APR are

inverted (as viewed while facing the back of the APR). Before attaching any

cables, verify that the connector pins are aligned correctly to avoid

damaging the connectors.

1. Refer to Figure 1-1 to attach external devices to the appropriate connectors on

the back of the APR.

NOTES: If the cable connector from the external device has thumbscrews, be

sure to tighten them to ensure a proper connection.

To connect the computer to a small computer system interface (SCSI) device,

you must attach a SCSI PC Card to your computer. See “PC Cards” in your online

Dell Latitude L400 User’s Guide for information about using PC Cards.

NOTICE: Do not plug a telephone line into the NIC connector.

For detailed information on using external devices with your computer, see

“Using External Devices” in your online User’sGuide.

Figure 1-1. Attaching External Devices to the APR

2. Connect the external devices to their power sources, if applicable.

PS/2 mouse connector keyboard connector

USB connector

serial connector

parallel connector

monitor connector

network connector

microphone connector

AC adapter connector

headphone/speakers connector

modem connector

external media bay

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-7

Connecting the Computer to the APR

Use the following instructions to connect your computer to the APR.

1. Save all your work, and exit all application programs.

2. Shut down the computer.

3. If you have not already done so, connect the AC adapter to the connector on the

APR (see Figure 1-1), and plug the AC power cable into an AC power source.

4. Place the back of the computer over the APR platform, aligning the sides of the

computer between the platform wings (see Figure 1-2).

Figure 1-2. Positioning the Computer on the APR

5. Carefully lower the computer onto the APR platform, as shown in Figure 1-2,

until the APR and computer docking connectors engage.

When you feel or hear a click, the computer is latched to the APR and the

docking connectors are fully engaged.

NOTICE: If the external devices that are connected through the APR are not

functioning properly, make sure the computer and APR are properly

connected by pressing down firmly on the two corners of the computer

nearest the APR docking connector.

6. Turn on the computer.

APR docking

connector

platform wings

APR platform

1-8 Dell Latitude L400 Advanced Port Replicator User’s Guide

Disconnecting the Computer From the APR

Use the following procedure to disconnect the computer from the APR:

1. Save all your work, and exit all application programs.

2. Shut down the computer.

3. Atthesametime,pressdownontheleftandrightreleasebuttonsonthetopof

the replicator, as shown in Figure 1-3, to undock the computer.

4. Lift the computer up and away from the APR.

Figure 1-3. Disconnecting the Computer From the APR

release buttons

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-9

Security Lock

The security lock prevents unauthorized removal of your APR. The security lock

swings out of the APR, as shown in Figure 1-4. An antitheft cable device is looped

around an immovable object, passed through the security lock on the APR, and then

locked to the security cable slot on the computer. For more information see the Dell

Latitude L400 User’s Guide.

Figure 1-4. APR Security Lock

security lock

1-10 Dell Latitude L400 Advanced Port Replicator User’s Guide

Technical Specifications

Table 1-2 lists the technical specifications for the APR.

Table 1-2. Technical Specifications

Physical

Height ........................... 38.25mm(1.5inches)

Depth............................ 50.0mm(2.0inches)

Width............................ 298.0mm(11.7inches)

Weight........................... 389g(0.86lb)

Connectors

Expansion (to connect to computer) . . . . APR docking connector

Serial(DTE) ....................... 9-pinmaleconnector

Parallel........................... 25-holefemaleconnector

PS/2-compatible keyboard/keypad. . . . . . 6-hole external keyboard connector

PS/2-compatible mouse. . . . . . . . . . . . . . 6-hole external mouse connector

LAN............................. RJ45connector

Modem .......................... RJ11connector

Monitor .......................... 15-holefemaleconnector

Audiojacks........................ microphone-in,oneline-outaudio

USB............................. 4-pinconnectors

Externalmediabay ................. 68-pinIDE/FDDconnector

DCin............................ three-pinDCpowerconnector

Environmental

Operatingtemperature .............. 5° to 35°C(41° to 95°F)

Storagetemperature................ –20° to 60°C(–4° to 149°F)

Operating relative humidity . . . . . . . . . . . 20% to 80% (noncondensing)

Storage relative humidity. . . . . . . . . . . . . 8% to 90% (noncondensing)

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-11

Regulatory Notices

Electromagnetic Interference (EMI) is any signal or emission, radiated in free space or

conducted along power or signal leads, that endangers the functioning of a radio

navigation or other safety service or seriously degrades, obstructs, or repeatedly

interrupts a licensed radio communications service. Radio communications services

include but are not limited to AM/FM commercial broadcast, television, cellular

services, radar, air-traffic control, pager, and Personal Communication Services (PCS).

These licensed services, along with unintentional radiators such as digital devices,

including computer systems, contribute to the electromagnetic environment.

Electromagnetic Compatibility (EMC) is the ability of items of electronic equipment to

function properly together in the electronic environment. While this computer system

has been designed and determined to be compliant with regulatory agency limits for

EMI, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause interference with radio communications services, which

can be determined by turning the equipment off and on, you are encouraged to try to

correct the interference by one or more of the following measures:

• Reorient the receiving antenna.

• Relocate the computer with respect to the receiver.

• Move the computer away from the receiver.

• Plug the computer into a different outlet so that the computer and the receiver

are on different branch circuits.

If necessary, consult a Dell Technical Support representative or an experienced radio/

television technician for additional suggestions. You may find the FCC Interference

Handbook, 1986, to be helpful. It is available from the U.S. Government Printing

Office, Washington, DC 20402, Stock No. 004-000-00450-7 or on the World Wide

Web at http://www.fcc.gov/cib/Publications/tvibook.html.

Dell computer systems are designed, tested, and classified for their intended

electromagnetic environment. These electromagnetic environment classifications

generally refer to the following harmonized definitions:

• Class A is typically for business or industrial environments.

• Class B is typically for residential environments.

Information Technology Equipment (ITE), including peripherals, expansion cards,

printers, input/output (I/O) devices, monitors, and so on, that are integrated into or

connected to the system should match the electromagnetic environment

classification of the computer system.

A Notice About Shielded Signal Cables: Use only shielded cables for

connecting peripherals to any Dell device to reduce the possibility of

interference with radio communications services. Using shielded cables

ensures that you maintain the appropriate EMC classification for the

intended environment. For parallel printers, a cable is available from Dell.

If you prefer, you can order a cable from Dell on the World Wide Web at

http://www.dell.com/products/dellware/index.htm.

1-12 Dell Latitude L400 Advanced Port Replicator User’s Guide

Most Dell computer systems are classified for Class B environments. To determine

the electromagnetic classification for your computer or device, refer to the following

sections specific for each regulatory agency. Each section provides country-specific

EMC/EMI or product safety information.

FCC Notices (U.S. Only)

Most Dell computer systems are classified by the Federal Communications

Commission (FCC) as Class B digital devices. However, the inclusion of certain

options can change the rating of some configurations to Class A. To determine which

classification applies to your computer system, examine all FCC registration labels

located on the bottom or back panel of your computer, on card-mounting brackets,

and on the cards themselves. If any one of the labels carries a Class A rating, your

entire system is considered to be a Class A digital device. If all labels carry an FCC

Class B rating as distinguished by either an FCC ID number or the FCC logo, ( ),

your system is considered to be a Class B digital device.

Once you have determined your system’s FCC classification, read the appropriate

FCC notice. Note that FCC regulations provide that changes or modifications not

expressly approved by Dell could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that

may cause undesired operation.

Class A

This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference, in which case you will be required to correct the interference at

your own expense.

Class B

This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may

cause interference with radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-13

turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

The following information is provided on the device or devices covered in this

document in compliance with FCC regulations:

• Model number: PRS

• Company name: Dell Computer Corporation

EMC Engineering Department

One Dell Way

Round Rock, Texas 78682 USA

512-338-4400

Modem Regulatory Information

This equipment complies with Part 68 of the FCC rules. On the bottom of your

computer is a label that contains, among other information, the FCC registration

number and ringer equivalence number (REN) for your equipment. If requested, you

must provide this information to the telephone company.

The REN is used to determine the quantity of devices that may be connected to the

telephone line. Excessive RENs on the telephone line may result in the devices not

ringing in response to an incoming call. In most areas, the sum of all the RENs on

your telephone line should be less than five to ensure proper service from the

telephone company. To be certain of the number of devices that you may connect to

a line, as determined by the total RENs, contact your local telephone company.

The registration jack Universal Service Order Code (USOC) used by this equipment is

RJ-11C. An FCC compliant telephone cord and modular plug is provided with this

equipment. This equipment is designed to be connected to the telephone network or

premises wiring using a compatible modular jack that is Part 68 compliant.

This equipment cannot be used on public coin-phone service provided by the

telephone company. Connection to party line service is subject to state tariffs.

There are no user serviceable parts on the modem contained in your computer.

If your telephone equipment causes harm to the telephone network, the telephone

company will notify you in advance that service may be temporarily discontinued. If

advance notice is not practical, the telephone company will notify you as soon as

possible. Also, you will be advised of your right to file a complaint with the FCC if you

believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or

procedures that could affect the operation of this equipment. If this happens, the

1-14 Dell Latitude L400 Advanced Port Replicator User’s Guide

telephone company will provide advance notice in order for you to make necessary

modifications to maintain uninterrupted service.

If you experience trouble with this telephone equipment, refer to the chapter titled

"Getting Help" in your system's troubleshooting documentation or, for some systems,

the section titled "Contacting Dell" in your system's online guide to find the

appropriate telephone number for obtaining customer assistance. If the equipment is

causing harm to the telephone network, the telephone company may request that

you disconnect the equipment until the problem is resolved.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to

use a computer or other electronic device, including fax machines, to send any

message unless such message clearly contains in a margin at the top or bottom of

each transmitted page or on the first page of the transmission, the date and time it is

sent, identification of the business, other entity, or individual sending the message,

and the telephone number of the sending machine or such business, other entity, or

individual. The telephone number provided may not be a 900 number or any other

number for which charges exceed local or long-distance transmission charges.

IC Notice (Canada Only)

Most Dell computers (and other Dell digital apparatus) are classified by the Industry

Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as Class B digital

devices. To determine which classification (Class A or B) applies to your computer (or

other Dell digital apparatus), examine all registration labels located on the bottom or

the back panel of your computer (or other digital apparatus). A statement in the form

of “IC Class A ICES-003” or “IC Class B ICES-003” will be located on one of these

labels. Note that Industry Canada regulations provide that changes or modifications

not expressly approved by Dell could void your authority to operate this equipment.

Modem Regulatory Information

The IC label identifies certified equipment. This certification means that the

equipment meets telecommunications network protective, operational, and safety

requirements as prescribed in the appropriate Terminal Equipment Technical

Requirements document(s). The IC label does not guarantee that the equipment will

operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company. The equipment

must also be installed using an acceptable method of connection. The customer

This Class B (or Class A, if so indicated on the registration label) digital apparatus

meets the requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numériquedelaClasseB(ouClasseA,siainsiindiqué sur l’étiquette

d’enregistration) respecte toutes les exigences du Reglement sur le Materiel

Brouilleur du Canada.

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-15

should be aware that compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated

by the supplier. Any repairs or alteration made by a user to this equipment, or

equipment malfunctions, may give the telephone communications company cause to

request the user to disconnect the equipment.

Users should ensure for their own protection, that the electrical ground connections

of the power utility, telephone lines, and internal metallic water-pipe system, if

present, are connected together. This precaution may be particularly important in rural

areas.

NOTICE: Users should not attempt to make such connections themselves.

Contact the appropriate electric inspection authority, or electrician, as

appropriate.

NOTE: The REN assigned to each terminal device provides an indication of the

maximum number of terminals allowed to be connected to a telephone interface. The

termination on an interface may consist of any combination of devices subject only to

the requirement that the sum of the RENs of all the devices does not exceed the

number five.

The REN for the internal modem as stated on the IC regulatory label located on the

bottom of the computer is 0.6B.

The following information is provided in compliance with IC regulations:

Dell Computer Corporation

Warranty and Repair Service Center

One Dell Way

Round Rock, TX 78682 USA

512-338-4400

CE Notice (European Union)

Marking by the symbol indicates compliance of this Dell system to the EMC

Directive and the Low Voltage Directive of the European Union. Such marking is

indicative that this Dell system meets the following technical standards:

• EN 55022 —“Limits and Methods of Measurement of Radio Interference

Characteristics of Information Technology Equipment.”

• EN 50082-1: 1992 —“Electromagnetic compatibility—Generic immunity

standard Part 1: Residential, commercial, and light industry.”

• EN 60950 —“Safety of Information Technology Equipment.”

1-16 Dell Latitude L400 Advanced Port Replicator User’s Guide

NOTE: EN 55022 emissions requirements provide for two classifications:

• Class A is for typical commercial areas.

• Class B is for typical domestic areas.

This Dell device is classified for use in a typical Class B domestic environment.

A “Declaration of Conformity” in accordance with the preceding directives and

standards has been made and is on file at Dell Computer Corporation Products

Europe BV, Limerick, Ireland.

EN 55022 Compliance (Czech Republic Only)

VCCI Notices (Japan Only)

Most Dell computer systems are classified by the Voluntary Control Council for

Interference (VCCI) as Class B Information Technology Equipment (ITE). However, the

inclusion of certain options can change the rating of some configurations to Class A.

ITE, including peripherals, expansion cards, printers, input/output (I/O) devices,

monitors, and so on, integrated into or connected to the system, should match the

electromagnetic environment classification (Class A or B) of the computer system.

To determine which classification applies to your computer system, examine the

regulatory labels/markings (see Figures 1-5 and 1-6) located on the bottom or back

panel of your computer. Once you have determined your system’s VCCI classification,

read the appropriate VCCI notice.

Class A ITE

This is a Class A product based on the standard of the Voluntary Control Council for

Interference (VCCI) for information technology equipment. If this equipment is used

This device belongs to Class B devices as described in EN 55022, unless it is

specifically stated that it is a Class A device on the specification label. The

following applies to devices in Class A of EN 55022 (radius of protection up to

30 meters). The user of the device is obliged to take all steps necessary to remove

sources of interference to telecommunication or other devices.

            

  !"#$$$$

% &#'() "*)+

# &,) &$$)#

,##"

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-17

in a domestic environment, radio disturbance may arise. When such trouble occurs,

the user may be required to take corrective actions.

Figure 1-5. VCCI Class A ITE Regulatory Mark

Class B ITE

This is a Class B product based on the standard of the Voluntary Control Council for

Interference (VCCI) for information technology equipment. If this equipment is used

near a radio or television receiver in a domestic environment, it may cause radio

interference. Install and use the equipment according to the instruction manual.

Figure 1-6. VCCI Class B ITE Regulatory Mark

MIC Notice (Republic of Korea Only)

To determine which classification (Class A or B) applies to your computer (or other Dell

digital device), examine the Republic of Korean Ministry of Information and

Communications (MIC) registration labels located on your computer (or other Dell

digital device). The MIC label may be located separately from the other regulatory

marking applied to your product. Line three of the label identifies the emissions class

for the product—“(A)” for Class A products or “(B)” for Class B products.

NOTE: MIC emissions requirements provide for two classifications:

• Class A devices are for business purposes.

• Class B devices are for nonbusiness purposes.

VCCI-A

1-18 Dell Latitude L400 Advanced Port Replicator User’s Guide

Class A Device

Please note that this device has been approved for business purposes with regard to

electromagnetic interference. If you find that this device is not suitable for your use,

you may exchange it for a nonbusiness-purpose device.

Class B Device

Please note that this device has been approved for nonbusiness purposes and may

be used in any environment, including residential areas.

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit

(a three-prong socket). All equipment that works together (computer, monitor, printer,

and so on) should have the same power supply source.

The phasing conductor of the room’s electrical installation should have a reserve

short-circuit protection device in the form of a fuse with a nominal value no larger

than 16 amperes (A).

support.dell.com Dell Latitude L400 Advanced Port Replicator User’s Guide 1-19

To completely switch off the equipment, the power supply cable must be removed

from the power supply socket, which should be located near the equipment and

easily accessible.

A protection mark “B” confirms that the equipment is in compliance with the

protection usage requirements of standards PN-93/T-42107 and PN-EN 55022: 1996.







-#$.$/,0$$1$$#$2. $,/ &#

%1$$2("342# ). $,.#$.$%##

##(/,0$$115#42"

6 )# $$ $/$/#0/#$/$7$/

#$#//. &#8#$$/# / ,$ $/#9 $/)

/8$):;<%#4/("

3  2/1/2. $#$.$$ $:/).0/ $8

,$). 1$1$4#/$)/08/,:#$.$,0

2/8"

=,$ $>/?!?/#$$190#$.$$/1

,$ $>/:/$/#/+@'AB-C;D+E;@@<"

F5, $ $/)$ $7# )85#$.$)

$ $5#$.$/9#/$5//0

$4 ## $"3 &#$ &55.0)1

5/$// &9#4/$# $ &"







•

::/0/ $#/ &,/02,/ &#1

$/ $"F: $): #$2: $::0#$2: $

'-:2/1$#/2/2. $#$/ &#"

•

G#/:$,$ $0#$12 &//

/$#,8 :/). ##$80#$.$

/). 1,,$$24 /15#42$"

•

:/08, :2, &#/1

#$,,,2$ $/) 1$:,2,

/0,08"

•

:#$/0)4/ &24/#/"

•

:/ &0: &#$4//#4/#/1

1:://0:#,#:#.#$$$/# 

4///8#$ &"

•

G#//$)/08$1#$)4/5#42

2":,/0/#4// ) &":0

2$5 &#4/##$$ $#/

) ,$:/9  # )/#$/421"

Stránka sa načítava ...

Dell Latitude L400 Užívateľská príručka

Dell Latitude L400 Užívateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty