Philco PCE 32614 N Návod na obsluhu

Kategória
Chladničky
Typ
Návod na obsluhu
TWO DOOR COMBINATION
REFRIGERATOR
USER'S MANUAL
PC 32614
Dear customer,
Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user's manual.
EN - 1
05/2014
Copyright © 2014, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION ................................................................................................. 2
• Safety notices ...................................................................................................................................................................................2
Safety instructions for gas R600a ..............................................................................................................................................4
PART 2: DESCRIPTION OF THE APPLIANCE .................................................................................................... 5
PART 3: INSTALLATION .................................................................................................................................... 6
Transport and unpacking ............................................................................................................................................................6
• Installation location .......................................................................................................................................................................7
Cleaning before use .......................................................................................................................................................................8
• Electrical connection .....................................................................................................................................................................8
Procedure for switching the door opening direction ..........................................................................................................
PART 4: OPERATING THE APPLIANCE ........................................................................................................... 15
• Controlling temperature ........................................................................................................................................................... 15
Setting the temperature in the refrigerator ....................................................................................................................... 15
Setting the temperature in the freezer ................................................................................................................................ 15
Super Freeze function ................................................................................................................................................................ 16
• Holiday function ...........................................................................................................................................................................16
• Refrigerator accessories ............................................................................................................................................................ 16
PART 5: ARRANGEMENT OF FOOD ............................................................................................................... 17
Advice about refrigerating food .............................................................................................................................................17
Chart on storing food in the refrigerator ............................................................................................................................ 17
Storage of frozen food ............................................................................................................................................................... 18
Chart on storing food in the freezer ..................................................................................................................................... 19
PART 6: DEFROSTING AND REGULAR MAINTENANCE ................................................................................ 20
PART 7: WHAT SHOULD I DO WHEN... ........................................................................................................... 22
PART 8: INFORMATION SHEET ...................................................................................................................... 24
EN - 2
05/2014
Copyright © 2014, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Safety notice
Symbols:
General advice for the optimal operation of the appliance
General dangers
Hot surfaces
Before you put the appliance into operation
Carefully study the user's manual and installation instructions before installing and using the appliance!
This user's manual includes important information regarding the installation, operation and maintenance
of the appliance. Store the user's manual also for future reference, or for other owners of the appliance if
the appliance is sold.
If the appliance is transported in a horizontal position the oil from the compressor may leak into the
cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before
turning it on, so that the oil can  ow back into the compressor.
After unpacking the appliance, carefully inspect that it has in no way been damaged. Also check that
the power cord is not damaged. If you discover any defects, turn o the appliance and contact the
vendor or in the case of a damaged power cord contact the service centre. If the appliance and all its
parts are in order, install it according to the instructions in the relevant chapter.
When installing the appliance in its place, or when moving the appliance, the power cord could be
penetrated or damaged. Check that the power cord is not interfering anywhere.
Before connecting the appliance to the electricity power source check that the capacity of the system
corresponds to the speci cations on the appliance's rating label.
Any kind of home electric wiring necessary for the connection of the appliance must only be carried out
by a quali ed electrician.
If you move the appliance from its usual position, it is necessary to understand, that although you
have disconnected the power cord, the components on the rear side of the appliance may remain
very hot for some time.
This appliance is not designed to be built-in. Do not cover or block the air in ow or out ow openings.
Insu cient ventilation will cause bad operation and damage to the appliance.
EN - 3
05/2014
Copyright © 2014, Fast ČR, a. s.
Operating the appliance
Use the appliance only for the purposes for which it has been designed.
This appliance is designed only for household use, for storing or freezing food and for preparing ice.
The temperature inside the refrigerator and freezer may rise or fall slightly, and so these appliances are not
suitable for storing products (e.g. medicines), which require a stable temperature.
Do not use any other electric appliances (e.g. heating elements, electric ice cream machines, etc.)
inside the appliance. There is a danger of explosion!
Do not place food inside the refrigerator containing  ammable propulsion gases (e.g. sprays) and no
explosives, contaminants or volatile substances. There is a danger of explosion!
Do not store liquids inside bottles and cans (especially beverages containing carbon dioxide) inside
the freezer. The bottles and cans could crack!
Store liquor only with a  rmly tightened cap and in a vertical position.
Do not use the base, drawers, door of the appliance, etc. as a step or as a support. There is a danger of injury
to persons or damage to the appliance.
Ensure that the plastic parts of the appliance and the door gasket seals are not soiled with oil or grease. The
plastic parts and the gasket seals would then become porous.
Do not consume frozen food immediately after taking it out of the freezer compartment. There is a danger
of frost bite!
Avoid prolonged hand contact with frozen food, ice or evaporating pipes. There is a danger of frost
bite and freezing to these objects!
We do not recommend placing hot liquids or food inside the refrigerator and  lling containers all the
way to the rim.
Do not put fragile, heavy or unstable objects on the refrigerator.
Children in the household
Never leave packaging and its parts with the children. There is a danger of poisoning or su ocation by the
cardboard boxes and plastic sheets!
This appliance is in no way a toy for children!
For appliances with door locks: do not leave keys within the reach of children!
If you will no longer be using the refrigerator, remove the doors, gasket seals and store it in a safe place. In
this way you will prevent the danger of children becoming trapped inside the refrigerator.
Maintenance and cleaning
Before you begin with regular or exceptional maintenance, disconnect the appliance's power cord
or turn o the fuse or circuit breaker. Never pull the electric power cord, only pull on the power plug.
Do not use mechanical or any other devices, except for devices recommended by the manufacturer
for the purpose of accelerating the defrosting process.
Do not defrost or clean the appliance using a steam cleaning device! The steam may come into contact
with the electric components inside the appliance, where a short circuit could occur. There is a danger of
electric shock!
Do not remove the frozen ice layer and frozen on food using a knife or a sharp object. This could damage
the cooling medium pipes. The escape of the cooling medium may cause eye injuries or may catch on  re.
EN - 4
05/2014
Copyright © 2014, Fast ČR, a. s.
General instructions
This appliance must not be used by persons (including children) with physical, sensory or psychological
impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the
appliance, or unless they have been properly supervised by a person who will be responsible for their
safety. Children should be supervised so as not to play with the appliance.
This appliance has been tested in accordance with the directives in force in the European Union.
The tightness of the cooling circuit has been veri ed.
This appliance conforms to the relevant safety provisions for electrical appliances in force in the European
Union.
Technical safety
The appliance contains a cooling gas, ISOBUTHAN (R600a). Only transport or move the appliance with
the utmost care, prevent excessive impacts and shaking to prevent damaging the appliance. If the
cooling circuit becomes damaged and the cooling gas may be escaping, there is a risk of an explosion,
which may be ignited by a spark or  ame. If the appliance shows signs of damage, it must not be put
into operation. In such a case contact the service centre, ventilate the room where the appliance is
located and prevent the spreading of  ames or other interference with the appliance.
Safety instructions for gas R600a
Measures in case of an unexpected release
If ventilation is possible, allow the material to evaporate.
Characteristics of the gas
The gas is highly  ammable, it is necessary to completely prevent contact with an open  ame and hot surfaces.
Because the R600a gas is heavier than air, it may become very concentrated at the level of the ground, where
ventilation is weak.
First aid
Inhalation
Take the a ected person from the contaminated area to a warm, well ventilated location. Staying in a
contaminated location for a long time may cause su ocation, or potentially loss of consciousness. If necessary,
provide mouth-to-mouth resuscitation and in exceptionally serious situations, under expert medical
supervision, give oxygen.
Contact with the skin
Random contact with the skin will not endanger health, it is better to thoroughly wash the a ected area. The
liquid spray or dispersed liquid may cause frost bite, wash the a ected area with large amounts of water and
contact a medical doctor.
Contact with the eyes
If eyes have been a ected, wash out with large amounts of water, while trying to keep the eyes open, and call
a specialised doctor as soon as possible.
If contact or inhalation of the R600a gas occurs, contact your medical doctor.
EN - 5
05/2014
Copyright © 2014, Fast ČR, a. s.
PART 2: DESCRIPTION OF THE APPLIANCE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
1. Outer case
2. Display
3. LED light
4. Glass shelves
5. Cover of the fruit and vegetable drawer
6. Fruit and vegetable drawer
7. Top freezer drawer
8. Top glass shelf of the freezer
9. Middle freezer drawer
10. Middle glass shelf of the freezer
11. Bottom freezer drawer
12. Levelling feet
13. Refrigerator door
14. Egg holder
15. Top shelf
16. Bottom shelf
17. Door gasket seals of the refrigerator
18. Door gasket seals of the freezer
19. Freezer door
NOTE:
Due to the continuous innovation of products, the actual appliance may di er from this user's manual
but the functions and methods of use remain the same. For more room in the freezer, you may remove
the drawers (except for the bottom drawer) and install grates and the ice tray.
EN - 6
05/2014
Copyright © 2014, Fast ČR, a. s.
PART 3: INSTALLATION
Transport and unpacking
If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling
circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that
the oil can  ow back into the compressor.
Remove the external packaging, remove the protective plastic  lm from the surface of the appliance (if used)
and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or
any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers
and adhesive tape from the appliance, doors and other parts packed in polystyrene. Remove documents and
accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any faults, stop the installation and contact the vendor.
Operating conditions
The proper operation of the appliance, the cooling and freezing temperature are guaranteed only when the
following conditions are met:
The temperature in the room where the appliance is located conforms to the climate class stated on the
appliance's rating label.
Maximum ambient relative humidity: 90%.
The appliance must be placed at a su cient distance from heat sources (e.g. baking ovens, central heating,
direct sunlight, etc.).
The appliance must be located in such a place that it is protected against the e ects of weather.
Regular maintenance is performed according to the instructions in this user's manual.
The ventilation openings in the cover of the appliance must not be covered by anything.
Correct installation (e.g. levelling, the capacity of the system correspond to the speci cations on the rating
label of the appliance.)
Table – Climatic class
Climatic class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
EN - 7
05/2014
Copyright © 2014, Fast ČR, a. s.
Installation location
The location for the placement of the appliance must meet the requirements in the paragraph "Operating
conditions" and must have a stable  oor with a load bearing capacity corresponding to the weight of the appliance.
Furthermore you must maintain distances and dimensions of the appliance, so that correct operation is ensured:
1. Top part at least 20 cm;
2. Rear part at least 10 cm;
3. The wall on the side where the door opens at least 30 cm.
Level the appliance using the levelling feet, ensure there is a gap between the bottom edge of the appliance
and the ground, so that there is su cient circulation of the cooling air, by which you will ensure the optimal
performance of the cooling circuit.
Check whether any cooling circulation pipes have been damaged during the installation.
Use the appliance only for the purposes for which it has been designed.
The appliance must be located on a rigid and even surface.
In this way you will ensure free circulation of the coolant and e ective operation of your appliance.
If possible, place the appliance into a cool, well ventilated and dry room.
Do not locate the appliance in direct sunlight, or in a room with a high temperature, in the vicinity of any
sources of direct heat, such as heating, an oven, a stove, etc. – this would mean that the compressor would
need to work a lot harder resulting a substantially higher power consumption level.
If it is not possible to prevent the installation in the vicinity of a heat source, we recommend the insertion of an
appropriate insulating board (do not use asbestos) between the appliance and the heat source; or at least to
maintain the following minimum distances:
From a gas or electric stove 3 cm;
From a heater or oven, etc. 30 cm;
From another cooling appliance 2 cm.
Do not place any appliances on the appliance, which emit heat on to the appliance, such as microwave ovens,
toasters, etc.
Never cover the ventilation grill. Pull out the power plug by pulling on the plug itself, never pull on the cord
when disconnecting the appliance.
Before turning on the appliance allow it to stand in its  nal location for 12 hours, the coolant circuit
will stabilise in this way and no operating problems will occur. Before connecting the appliance to the
power grid check that it is perfectly dry inside – especially in the corners.
Danger warning
The coolant may be highly  ammable, depending on its composition. The coolant circuit was
hermetically closed and sealed and was tested many times for possible leaks. Any unquali ed
tampering with the product may cause a  re hazard. Check that there is no mechanical interruption
or e ect on the coolant circulation, namely in the accessible parts around the compressor.
Only professionally quali ed persons may work on the cooling system.
EN - 8
05/2014
Copyright © 2014, Fast ČR, a. s.
NOTE:
The doors open up to an angle of 135°. Therefore, ensure su cient space on the side where the doors
open. See the following picture.
Cleaning before use
Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive
agents, which could damage the surfaces.
Electrical connection
Before connecting the power plug to the power socket, check that:
Your hands are completely dry.
The voltage and frequency shown on the rating label of the appliance corresponds to that in the home
power grid (permitted tolerance from -6% to +6% for nominal voltage. For use with di erent voltages, use
a voltage changer with the corresponding parameters).
The power cord and the plug are not damaged or caught under heavy objects.
The power cord is not excessively tensioned, it is not permitted to use an extension cord.
Do not connect the appliance to a voltage recti er (e.g. solar power plant) or use an extension cord.
The appliance must be connected to a working grounding lead.
If the power socket of the home system is not grounded in accordance with the current legal regulations,
connect the appliance after consulting a specialised technician to the grounding lead itself.
The manufacturer takes no responsibility for injuries caused as a result of not following these
instructions.
If you do not correctly level the refrigerator during the installation, the doors may not close shut and
seal properly, which may cause problems with the cooling, ice build up or moisture. Levelling the
refrigerator is very important.
Level the refrigerator using the levelling feet – turn them clockwise to lift the refrigerator and turn them
anticlockwise to lower the refrigerator.
EN - 9
05/2014
Copyright © 2014, Fast ČR, a. s.
Procedure for switching the door opening direction
You can change the door opening direction - from the right (as supplied by the manufacturer) to the left if the
location of the refrigerator requires it.
WARNING:
When changing the door opening direction, the appliance must not be connected to the power
supply. Check that you have disconnected the plug of the power cord from the mains power socket.
Tools
8mm socket wrench Philips screwdriver
Narrow  at screwdriver 8mm wrench
NOTE:
Prior to starting with the change, place the appliance on its back so as to gain access to its underside. Lay
the appliance down on to a soft mat or similar material so that the cooling circuit located in the rear of
the appliance is not damaged.
To change the door opening direction, proceed as follows.
1. Stand the refrigerator upright. Take all food and shelves out of the refrigerator to prevent their possible
damage.
Shelf
2. Open part 1 in the top part of the refrigerator from the right side and then remove part 3 and part 4 on
the top door in the same manner. Remove part 2 and put it back into the plastic bag.
EN - 10
05/2014
Copyright © 2014, Fast ČR, a. s.
Top cover
Top hinge cover (right)
Top cover of the top door
Corner cover
3. Remove the corner cover.
4. Using a screwdriver, screw out the screws 1 and remove part 2
Special self-tapping screws
Part
NOTE:
Hold the refrigerator door with one hand so that it does not fall o .
5. Pull out the top door upwards and place it on a soft mat with the inside part facing downwards. Loosen
screws 3, remove parts 2 and 1, then install parts 1 and 2 (from the plastic bag) on the left side and
secure in place with screws 3. Place the removed part 2 into the plastic bag.
EN - 11
05/2014
Copyright © 2014, Fast ČR, a. s.
Door holder
Door stopper
Self-tapping screws
6. Screw out the special self-tapping screws from the middle hinge and remove the middle hinge which is
holding the bottom door.
7. Pull out the bottom door upwards and place it on a soft mat with the inside part facing downwards.
Loosen screws 3, remove parts 2 and 1. Rotate part 1 by 180 ° and then install parts 1 and part 2 in
the appropriate location on the left part and secure in place with screws 1.
EN - 12
05/2014
Copyright © 2014, Fast ČR, a. s.
Door holder
Door stopper
Self-tapping screws
8. Remove the screw hole covers from the left side as shown on the picture below and move them to the
other side on to the uncovered holes.
9. Place the refrigerator on its back on a soft underlay. Remove part 3 and loosen screws 4. Remove parts
2 and 1.
Bottom hinge (right)
Front foot plate
Bottom part of the levelling
feet
Special self-tapping screws
Washer
Note: The washer may
stick to the bottom
part of the door.
10. Screw out the bottom hinge, turn it over and screw it on to the other side.
11. Again attach parts in 9. Change part 1 to the left side and part 2 to the right side and then secure in place
with screws 4. Finally install part 3.
EN - 13
05/2014
Copyright © 2014, Fast ČR, a. s.
Bottom hinge
12. Seat the bottom door on the hinge pin, level respective to the bottom and top shaft. Rotate the central
hinge by 180°, replace the washer on the shaft to the top part, set the central hinge to the appropriate
position and secure in place.
Washer
Note: The washer may stick to
the bottom part of the door.
13. Screw out the shaft of the top hinge, rotate the top hinge and insert the shaft into it. Then install the
second side.
14. Seat the top door on the hinge pin, level part 1 and the top door. The secure part 1 in place using screws
2. (Hold the door in place with your other hand during the installation.)
EN - 14
05/2014
Copyright © 2014, Fast ČR, a. s.
15. Install the top door hinge cover (take it out of the plastic bag). Screw {screw}
Top hinge cover (left)
16. Rotate part 1 by 180 ° and install it in the right corner of the top door. Then attach part 2. (You removed
both parts in step 2.)
17. Install part 1 and then part 2.
18. Open the doors and reinsert the shelves and drawers and then close the doors.
EN - 15
05/2014
Copyright © 2014, Fast ČR, a. s.
PART 4: OPERATING THE APPLIANCE
The appliance is operated using the display located in the top part of the refrigerator.
The icons on the display will be backlit when the appliance's power plug is connected to a power socket. The
icon backlight will automatically turn o if you do not touch any icon and the doors are closed.
Controlling temperature
When you turn on the appliance for the  rst time or after an extended period, the temperature in the refrigerator
will be set to 4 °C and in the freezer to -18 °C. If you wish to adjust the temperature, proceed according to the
instruction in another part of this user s manual.
WARNING:
Please keep in mind that when you set a temperature, this is an average temperature in the entire area of the
refrigerator / freezer. The temperatures inside each compartment may di er slightly from the temperature
on the display, and this depends on the amount of inserted food, the number of times the door is opened,
etc. Likewise, ambient temperature may also a ect the  nal temperature inside the refrigerator.
Setting the temperature in the refrigerator
Short press the icon to set the temperature inside the refrigerator from 2 °C to 8 °C as required. The
indicator light of the selected temperature will be lit on the control panel. The temperatures will change in the
following order:
For standard operation we recommend that the appliance be set to a temperature of 4 – 6 °C.
IMPORTANT:
During hot summer days when the temperature control dial is set to 2 °C, the compressor may run
continuously. This is normal as the compressor is trying to maintain the temperature at the set level.
NOTE:
Inside the refrigerator there are outlets from the cold air distribution ducts. These outlets must remain
freely accessible and must not be blocked so that the proper operation of the appliance is ensured.
Setting the temperature in the freezer
Short press the icon to set the temperature inside the refrigerator from -16 °C to -24 °C as required. The
indicator light of the selected temperature will be lit on the control panel. The temperatures will change in the
following order:
For standard operation we recommend that the appliance be set to a temperature of -18 – -20 °C.
EN - 16
05/2014
Copyright © 2014, Fast ČR, a. s.
Super Freeze function
The Super Freeze function rapidly lowers the temperature inside the freezer by which it very quickly freezes the
inserted food, which will retain the vitamins and nutritional values of fresh food.
Press and hold the button for approx. 3 seconds to activate the Super Freeze function. The icon will
be lit.
If you insert the maximum amount of food that the freezer is able to freeze, wait 24 hours until it is fully frozen.
The Super Freeze function automatically turns itself o after 26 hours.
You can turn o the Super Freeze function while it is running by pressing and holding down the button
for approx. 3 seconds. The temperature setting will return to the initial setting.
Holiday function
If you will be away from home for an extended period of time, you can activate the Holiday function.
Press and hold the
button for approx. 3 seconds until the icon is lit on the display.
As soon as the Holiday function is turned on, the temperature inside the refrigerator will automatically be set
to 15 °C to reduce power consumption.
Warning:
Do not store any food inside the refrigerator during this time.
You can cancel the Holiday function by pressing and holding down the button. The temperature setting
will return to the initial setting.
Refrigerator accessories
Refrigerator shelves
The refrigerator shelves can be moved to a di erent height if necessary by being inserted into a respective rail
or taken out for easy cleaning.
Shelves in the door
These are used for storing smaller-sized food such as cheeses, meat, eggs and bottles. They can be installed at
various heights as required.
Fruit and vegetable drawer
It is used for storing fruit and vegetables.
Freezer drawers
These are used for storing frozen food.
EN - 17
05/2014
Copyright © 2014, Fast ČR, a. s.
PART 5: ARRANGEMENT OF FOOD
Food products, which are susceptible to the absorption of odours or that release odours must always be
stored in closed boxes or in appropriate packaging.
Fruit, vegetables and salad products can be stored unpacked in the vegetable drawers.
Appropriate wrapping materials for food is plastic wrap, aluminium foil, glass jars, etc.
The products should not touch the back wall, otherwise they may freeze on.
Always allow hot dishes to cool down before placing them into the refrigerator.
Open the door only for a short time so that the inside area of the fridge is not heated. This saves energy.
Never store explosive materials or products with  ammable compressed gasses (e.g. whipped cream
sprayers with pressurised capsules/cartridges, spray cans) – DANGER OF EXPLOSION!
Do not place oils intended for the preparation of meals into the removable drawers in the refrigerator
door. This may cause cracks caused by the pressure in the plastic on the door.
Alcoholic beverages must always be stored in the cold zone, in a vertical position and  rmly and safely
closed.
Advice about refrigerating food
While the air in the refrigerator circulates, areas with various temperatures arise. These areas are especially
useful for storing various types of food. Arrange the food in such a way that air can freely  ow around the food.
The coldest zones (suitable for example for storing meat) are found immediately above the vegetable drawers.
On the other hand the zones that are less cold are at the top towards the outside and inside the door (ideal for
storing butter and cheese).
Table - Storing food in the refrigerator
Food Storage method Zone Durability
Meat and  sh (various),
hard cheeses
Plastic foil, aluminium foil,
closed glass containers,
plastic containers
Bottom part of the
refrigerator
1-2 days
Cooked dishes, cold dishes,
confectionery
Closed glass or plastic
containers
Any shelf 1-2 days
Fruit and vegetables
Closed packaging or in
bulk
Fruit and vegetable
drawer
3-4 days
Bananas, potatoes, onion,
garlic
Do not store in the
refrigerator
--
Water, wine, beer, milk,
fruit juices,  zzy drinks
Food grade glass or plastic
bottles
Tray in the door
Depends on expiry
date
Pickled or in oil marinated
food, sauces, butter, soft
cheese, eggs
Original packaging Tray in the door
Depends on expiry
date
Yoghurt Original packaging Any shelf
Depends on expiry
date
EN - 18
05/2014
Copyright © 2014, Fast ČR, a. s.
Storage of frozen food
All frozen food must be put into the freezer as soon as possible after being bought, so that they do not defrost
and cause potential contamination.
Store frozen products according to the manufacturer's instructions on the packaging.
Pay increased attention to handling the drawer, so that you do not damage the cooling circuit.
Placing fresh food into a freezer
Ensure that the freezer is clean as the freezing process itself does not sterilise food. We recommend freezing
food in the original packaging, or in various containers suitable for freezing or in special freezer bags. Never
place hot or warm dishes into the freezer. Allow dishes to fully cool down before placing them into the freezer,
wrap them in a plastic bag, aluminium foil or put them in a jar. Check the label on the freezer, to check how
many kilos of fresh food (at a room temperature of 25°C) the freezer is able to freeze in 24 hours. Never insert
more food than the permitted amount.
WARNING:
Never place bottles with  zzy drinks into the freezer nor any other bottles.
For better freezing results give the food su cient room for air circulation.
We recommend a setting between the medium and maximum value for standard use and for long term
food storage in the freezer.
ATTENTION:
Do not store cans and bottles with beverages containing carbon dioxide in the freezer. The contents
expand during the freezing process, which may rip the bottle or can apart. Risk of injury and damage!
Consume ice cream only several minutes after removing it from the freezer – you will avoid injury to
your lips and tongue. Do not touch the inside of the freezer if you have wet hands.
Important information
Place only properly wrapped food into the freezer.
When storing deep frozen food intended for immediate consumption, note the expiry date marked by the
manufacturer.
Remember that only quality fresh food is suitable for freezing.
Freeze fresh food in appropriately sized portions.
Ensure that you use an appropriate wrapping material (plastic wrap, aluminium foil, freezing bays).
Push all air out of the packages.
To close the packages use rubber bands, plastic clips, tie wire or adhesive tape resistant to cold.
Plastic bags and tubes can also be closed using a food sealing appliance.
On the closed package, write down the contents, weight and date of freezing.
Before placing plastic bags into the freezer check that they are dry so as to prevent them from freezing to
each other.
To prevent partial defrosting, place the food that is to be frozen in such a way that it is not touching the
already frozen food.
Do not refreeze fully or partially defrosted food apart from the case where they were heat processed
(cooked or fried/baked).
Do not consume food that has been stored for a period longer than their expiry date. You may cause
yourself food poisoning.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Philco PCE 32614 N Návod na obsluhu

Kategória
Chladničky
Typ
Návod na obsluhu

V iných jazykoch