LORD W3 Návod na obsluhu

User manual

Návod kobsluze

Návod na obsluhu

Washing machine

Pračka

Práčka

W2 | W3

2

SAFETY INSTRUCTIONS

Safety Instructions .................................................3

Product Description .............................................10

INSTALLATION

Installation ........................................................11

Quick Start ........................................................14

OPERATIONS

Before Each Drying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Detergent Dispenser .............................................16

Control Panel .....................................................17

Option ............................................................. 18

Other Functions ..................................................20

Programmes ......................................................22

Washing Programmes Table ....................................23

Cleaning And Care ...............................................24

MAINTENANCES

Trouble Shooting .................................................27

Technical Specifications .........................................28

3

SAFETY INSTRUCTIONS

Safety Instructions

For your safety, the information in this manual must be followed

to minimize the risk of fire or explosion, electric shock, or

to prevent property damage, personal injury or loss of life.

Explanation of the symbols:

Warning!

This combination of symbol and signal word indicates

apotentially dangerous situation which may result in

death or serious injuries unless it’savoided.

Caution!

This combination of symbol and signal word indicates

apotentially dangerous situation which may result in slight or

minor injuries or damage to property and the environment.

Note!

This combination of symbol and signal word indicates

apotentially dangerous situation which may result in slight or

minor injuries.

SAFETY INSTRUCTIONS

4

SAFETY INSTRUCTIONS

Warning!

The electric shock!

yIf the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid ahazard.

yThe new hose ‑sets supplied with the appliance are to be used

and that old hose ‑sets should not be reused.

yBefore any maintenance the device, unplug the appliance from

the mains.

yAlways unplug the machine and turn off the water supply after

use. The max. inlet water pressure, in pascals. The min. inlet

water pressure, in pascals.

yTo ensure your safety, power plug must be inserted into an

earthed three ‑pole socket. Check carefully and make sure that

your socket is properly and reliably earthed.

yMake sure that the water and electrical devices must be

connected by aqualified technician in accordance with the

manufacturer’sinstructions and local safety regulations.

yPull out its plug from the power socket before cleaning or

maintenance.

yDo not use any socket with rated current less than that of

appliance. Never pull out power plug with wet hand.

yPlease remember to disconnect water and power supply

immediately after the clothes are washed.

5

SAFETY INSTRUCTIONS

Risk to children!

yEN countries: the appliance can be used by children aged from

8 years and above and persons with reduced physical, sensory

or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in asafe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without

supervision.

yChildren of less than 3years should be supervised to ensure

that they do not play with appliance.

yAnimals and children may climb into the machine. Check the

machine before every operation.

yKids should be supervised that they do not play with the

appliance.

yGlass door may be very hot during the operation. Keep kids

and pets far away from the machine during the operation very

wet rooms as well as in the rooms with explosive or caustic gas.

yRemove all packages and transport bolts before using the

appliance. Otherwise, serious damage may result.

Risk of explosion!

yDo not wash or dry articles that have been cleaned in, washed

in, soaked in, or dabbed with combustible or explosive

substances(such as wax, oil, paint, gasoline, degreasers, dry‑

‑cleaning solvents, kerosene, etc.) This may result in fire or

explosion.

6

SAFETY INSTRUCTIONS

yThe washer dryer is not to be used if industrial chemicals have

been used for cleaning.

yThe exhaust air must not be discharged into aflue which is for

exhausting fumes from appliances burning gas or other fuels.

yBefore hand thoroughly rinse items of washing by hand.

Caution!

Installing the product!

yThis appliance is for indoor use only.

yIt isn’t intended to be built ‑in using.

yThe openings must not be obstructed by acarpet.

yThe appliance shall not be installed in bath room or very wet

rooms as well as in the rooms with explosive or caustic gases.

yThe appliance with single inlet valve only can be connected to

the cold water supply. The appliance with double inlet valves

should be correctly connected to the SAFETY INSTRUCTIONS

hot water and cold water supply.

yPlug must be accessible after installation.

yThe appliance must not be installed behind alockable door,

asliding door or adoor with ahinge on the opposite side to

that of the washer dryer.

yThe appliance shall not be installed at ahumid place.

yRemove all packages and transport bolts before using the

appliance. Otherwise, serious damage may result.

7

SAFETY INSTRUCTIONS

Risk of damaging appliance!

yThe product is only for home use and is only designed for the

textiles suitable for machine washing and drying.

yDo not climb up and sit on top cover of the machine.

yDo not lean against machine door.

yCautions during Handling Machine:

1. Transport bolts shall be reinstalled to the machine by

aspecialized person.

2. The accumulated water shall be drained out of the machine.

3. Handle the machine carefully. Never hold each protruded

part on the machine while lifting. Machine door can not be

used as the handle during the conveyance.

4. This appliance is heavy. Transport with care.

5. That the hands shall not be inserted into running water

extracting tub.

yPlease do not close the door with excessive forces. If it is found

difficult to close the door, please check if the clothes are put in

or distributed well.

yIt is forbidden to wash carpets.

Operating the appliance!

yBefore using the wash machine, the product shall be calibrated.

yBefore washing the clothes at first time, the product shall be

operated in one round of the whole procedures without the

clothes inside.

8

SAFETY INSTRUCTIONS

yFlammable and explosive or toxic solvents are forbidden.

Gasoline and alcohol etc.Shall not be used as detergents.

Please only select the detergents suitable for machine washing,

especially for drum.

yMake sure that all pockets are emptied. Sharp and rigid items

such as coin, brooch, nail, screw or stone etc. may cause serious

damages to this machine.

yPlease check whether the water inside the drum has been

drained before opening its door. Please do not open he door if

there is any water visible.

yBe careful of burning when the product drains hot washing

water.

yAfter the program is completed, Please wait for two minutes to

open the door(Some model).

yNever refill the water by hand during washing.

yIf it is unavoidable that fabrics that contain vegetable or

cooking oil or have been contaminated by hair care products. it

be placed in atumble dryer they should first be washed in hot

water with extra detergent, this will reduce, but not eliminate,

the hazard.

yAdequate ventilation has to be provided to avoid the back flow

of gases into the room from appliances burning other fuels,

including open fires.

yDo not dry unwashed items in the appliance.

yItems that have been soiled with substances such as cooking

oil, acetone, alcohol, petrol, kerosene, spot removers,

turpentine, waxes and wax removers should be washed in hot

with an extra amount of detergent before being dried in the

appliance.

9

SAFETY INSTRUCTIONS

yItems such as foam rubber (latex foam), shower caps, water

proof textiles, rubber backed articles and clothes or pillows

fitted with foam rubber pads should not be dried in the

machine.

yFabric softeners, or similar products, should be used as

specified by the fabric softener instructions.

yThe machine whose lid can be opended during water

extraction, that it takes 15 s or more for complete stop of water

extracting chamber tub.

yThe final part of awasher dryer cycle occurs without heat (cool

down cycle) to ensure that the items are left at atemperature

that ensures that the items will not be damaged.

yRemove all objects from pockets such as lighters and matches

before use the appliance.

yWARNING: Never stop awasher dryer before the end of the

drying cycle unless all items are quickly removed and spread

out so that the heat is dissipated.

Packaging/Old appliance

This marking indicates that this product should not

be disposed with other household wastes throughout

the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable

reuse of material resources. To return your used

device, please use the collection systems or contact

the retailer where the product was purchased. They

return and can take this product for environmental

safe recycling.

10

INSTALLATION

Product Description

Top cover

Control panel

Power supply cord

Drum

Service filter

Water supply hose

Detergent dispenser

Door

Drain hose

Note!

yThe product line chart is for reference only, please refer to real product as standard.

Accessories

Transport hole

plug

Supply hose cold

water

Supply hose hot

water (optional)

Drain hose

support (optional)

Owner’smanual

INSTALLATION

11

INSTALLATION

Installation

Installation area

Warning!

yStability is important to prevent the product from

wandering!

yMake sure that the product should not stand on the power cord.

Before installing the machine, the location characterized as follows

shall be selected:

1. Rigid, dry, and level surface

2. Avoid direct sunlight

3. Sufficient ventilation

4. Room temperature is above 0 °C

5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

Warning!

yPackaging material (e.g. Films, Styrofoam) can be

dangerous for children.

yThere is arisk of suffocation! Keep all packaging well away

from children.

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing.Make sure the small triangle

foam is removed with the bottom one together. If not, lay the unit down with side

surface, then remove the small foam from the unit bottom manually.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

Remove transport bolts

Warning!

yYou must remove the transport bolts from the backside before using the product.

yYou’ll need the transport bolts again if you move the product, so make sure you

keep them in asafe place.

1. Please take the following steps to remove the bolts:

2. Loosen 4 bolts with spanner and then remove them.

3. Stop the holes with transport hole plugs.

4. Keep the transport bolts properly for future use.

12

INSTALLATION

Levelling the washing machine

Warning!

yThe lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their

original positions tighten the nuts.

2. Loosen the lock nut turn the feet until it closely contacts with the floor.

3. Adjust the legs and lock them with aspanner, make sure the machine is steady.

Raise Lower

Lock nut

Foot

Connect Water Supply Hose

Warning!

yTo prevent leakage or water damage, follow the instructions in this chapter!

yDo not kink, crush, modify or sever water inlet hose.

yFor the model equips hot valve, connect it to hot water tap with hot water supply

hose. Energy consumption will decrease automatically for some program.

Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.

1. Connection between ordinary tap and inlet hose.

clamp nut

Loosen clamp nut

and four bolts

Tighten clamp nut Press slide bushing,

insert inlet hose into

connecting base

Connection finished

slide bushing

2. Connection between screw tap and inlet hose.

Tap with threads and inlet hose Special tap for washing machine

slide bushing

13

INSTALLATION

Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten

the pipe tightly clockwise.

water Inlet valve

water supply hose

Drain Hose

Warning!

yDo not kink or protract the drain hose.

yPosition drain hose properly, otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1. Put it into the water trough.

Water

trough

2. Connect it to the branch

drain pipe of the trough.

Note!

yIf the machine has drain hose support, please install it like the following.

Trough Hose

Retainer

Bind

Warning!

yWhen installing drain hose, fix it properly with arope.

yIf drain hose is too long, do not force it into washing machine as it will cause

abnormal noises.

14

INSTALLATION

Quick Start

Caution!

yBefore washing, please make sure it’sinstalled properly.

yBefore washing at first time, the washing machine shall be operated in oneround of

the whole procedures without clothes in as follows.

Calibration

It’srecommend to calibrate the wash machine so that can serve you better.

1. Empty the wash machine;

2. Plug in;

3. Power on the wash machine and press “Delay“ and “Spin“ at the same time within 10

seconds then display “t19“

4. Press to start the wash machine and wait till display “****“

1. Before Washing

Plug in Open tap Load Close door Add detergent

Main

wash

Prewash

Softener

Note!

yDetergent need to be added in “case I“ after selecting pre ‑washing for machines with

this function.

2. Washing

Power On Select Programme Select function or

default Start up

15

OPERATIONS

Note!

y1. If default is selected, step 3 can be skipped.

2. The function button line chart is for reference only, please refer to real product

as standard.

3. After Washing

Buzzer beep or “End“ on display.

Before Each Drying

yThe working condition of the washer should be (0–40) °C. If used under 0 °C,the inlet

valve and draining system may be damaged. If the machine is placed under condition of

0° C or less, then it should be transferred to normal ambient temperature to ensure the

water supply hose and drain hose are not frozen before use.

yPlease check the labels and the explanation of using detergent before wash. Use non‑

‑foaming or less ‑foaming detergent suitable for machine washing properly.

Check the label Take out the items out

of the pockets Knot the long strips, zip

or button

Put small clothes into

the pillow slip Turn easy ‑pilling and long‑

‑pile fabric inside out Separate clothes with

different textures

Warning!

yWhen washing asingle clothes, it may easily cause great eccentricity and give alarm

due to great unbalance. Therefore it is suggested to add one or two more clothes to

be washed together so that draining can be done smoothly.

yDon’t washing the clothes touching with kerosene, gasoline, alcohol and other

flammable materials.

16

OPERATIONS

Detergent Dispenser

Prewash detergent

Main Wash detergent

Softener

Caution!

yDetergent only need to be added in “case I“ after selecting pre ‑washing for machines

with this function.

Programme

Cotton

Synthetic

Sterilization

Jeans

Mix

20 °C

Rinse & Spin

Spin Only

Programme

Intensive

ECO 40–60

Delicate

Wool

Sport Wear

Rapid 45‘

Quick 15‘

Means must Means optional

Note!

yAs for the agglomerated or ropy detergent or additive, before they are poured into

the detergent box, it is suggested to use some water for dilution to prevent the inlet

of detergent box from being blocked and overflowing while filling water.

yPlease choose suitable type of detergent for the various washing temperature to get

the best washing performance with less water and energy consumption.

Pull out the dispenser

17

OPERATIONS

Control Panel

Model: W2, W3

Note!

yThe chart is for reference only, Please refer to real product as standard.

aOn/Off bStart/Pause

Product is switched On/Off. Press the button to start or pause the

washing cycle.

cOption dProgrammes

This allows you to select an additional

function and will light when selected.

Available according to the laundry

type.

eDisplay

The display shows the settings, estimated time remaining, options, and status

messages for your washer. The display will remain on through the cycle.

Remain Mute Buzzer

Delay Reload

Speed Wash Child Lock

My Cycle Door Lock

Water rinse + Spin Speed

Prewash Temp.

Rate Of Progress

(Prewash– Wash– Rinse– Spin)

Wash Time Delay Time

Error End

18

OPERATIONS

Option

Delay

Set the Delay function:

1. Select aprogramme;

2. Press the Delay button to choose the time(the delaying time is 0–24 H.);

3. Press [Start/Pause] to commence the delay operation.

Choose the Programme Setting time Start

Cancel the Delay function:

Press the [Delay] button until the display be 0H.It should be pressed before starting the

programme. If the programme already started, should switch off programme to reset

anew one.

Caution!

yIf there is any break in the power supply while the machine is operating, aspecial

memory stores the selected programme and when the power is restarted, the

program will continue.

Prewash

The Prewash function can get an extra wash before main wash, it is suitable for washing

the dust rises to surface of the clothes; You need to put detergent into the Case (I) when

select it.

Extra Rinse

The laundry will undergo extra rinse once after you select it.

Speed Wash

The function can decrease the washing time.

My Cycle

To memory the frequently used programme.

After choosing the programme and setting the options, press [Speed Wash ] 3 sec.

before start to wash. The default setting course is Cotton.

19

OPERATIONS

Reload

This operation can be executed during the washing progress. When the drum is still

rolling and there is large amount of water with high temperature in the drum. The state

is unsafe and the door cannot be opened forcefully. To press

[Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway function.

Please follow the steps as bellow:

1. Wait until the drum stops rotation.

2. The door lock is unlocked.

3. Close the door when the clothes are reloaded and press the [Start/Pause] button.

Press[Start/Pause]3sec. Reload the clothes Start

Caution!

yDon’t use the Reload function when the water level over the edge of the inner tub

or the temperature is higher.

20

OPERATIONS

Other Functions

Temp.

Press the button to regulate the temperature (Cold, 20 °C, 30 °C, 40 °C, 60 °C, 90 °C)

Spin

Press the button to change the speed.

1400: 0–600–800–1000–1200–1400

1500: 0–600–800–1000–1200–1500

Model: W2, W3

Programme Default Speed (rpm) Programme Default Speed (rpm)

1400 1500 1400 1500

Cotton 1400 1500 Intensive 800 800

Synthetic 1200 1200 ECO 40‑60 1400 1500

Hygiene 800 800 Delicate 600 600

Jeans 800 800 Wool 600 600

Mix 800 800 Sport Wear 800 800

20 °C 1000 1000 Rapid 45‘ 800 800

Rinse & Spin 1000 1000 Quick 15‘ 800 800

Spin 1000 1000

Stránka sa načítava...

LORD W3 Návod na obsluhu

LORD W3 Návod na obsluhu

v iných jazykoch

Súvisiace články

Ostatné dokumenty