Indesit XWA 61052 W EU Užívateľská príručka

Kategória
Práčky
Typ
Užívateľská príručka
GB
1
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 5
General safety
Load balancing system
Disposal
Description of the washing machine
and starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Push & Wash
Table of wash cycles
Personalisation, 9
Setting the temperature
Setting the spin speed
Functions
Detergents and laundry, 10
Detergent dispenser drawer
Bleach cycle
Preparing the laundry
Garments requiring special care
Troubleshooting, 11
Service, 12
XWA 61052
Instructions for use
WASHING MACHINE
English,1
GB
BG
Български,37
PL
Polski,49
CZ
Česky,13
SK
Slovensky,25
2
GB
Levelling the machine correctly will provide
it with stability, help to avoid vibrations and
excessive noise and prevent it from shifting
while it is operating. If it is placed on carpet or
a rug, adjust the feet in such a way as to allow
a sufficient ventilation space underneath the
washing machine.
Connecting the electricity and water
supplies
Connecting the water inlet hose
1. Connect the inlet
hose by screwing it
to a cold water tap
using a 3/4 gas thre-
aded connection (see
figure).
Before performing the
connection, allow the
water to run freely un-
til it is perfectly clear.
2. Connect the inlet
hose to the washing
machine by screwing
it onto the correspon-
ding water inlet of the
appliance, which is
situated on the top
right-hand side of the
rear part of the ap-
pliance (see figure).
3. Make sure that the hose is not folded over
or bent.
! The water pressure at the tap must fall within
the range of values indicated in the Technical
data table (see next page).
! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
! Never use second-hand hoses.
! Use the ones supplied with the machine.
Installation
! This instruction manual should be kept in a
safe place for future reference. If the washing
machine is sold, transferred or moved, make
sure that the instruction manual remains with
the machine so that the new owner is able to
familiarise himself/herself with its operation
and features.
! Read these instructions carefully: they con-
tain vital information relating to the safe instal-
lation and operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its
packaging.
2. Make sure that the washing machine has
not been damaged during the transportation
process. If it has been damaged, contact the
retailer and do not proceed any further with
the installation process.
3. Remove the 4 pro-
tective screws (used
during transportation)
and the rubber wa-
sher with the cor-
responding spacer,
located on the rear
part of the appliance
(see figure).
4. Close off the holes using the plastic plugs
provided.
5. Keep all the parts in a safe place: you will
need them again if the washing machine ne-
eds to be moved to another location.
! Packaging materials should not be used as
toys for children.
Levelling
1. Install the washing machine on a flat sturdy
floor, without resting it up against walls, furni-
ture cabinets or anything else.
2. If the floor is not
perfectly level, com-
pensate for any une-
venness by tightening
or loosening the
adjustable front feet
(see figure); the angle
of inclination, measu-
red in relation to the
worktop, must not
exceed 2°.
GB
3
Connecting the drain hose
Connect the drain
hose, without bending
it, to a drain duct or
a wall drain situated
between 65 and 100
cm from the floor;
alternatively, placed
it over the edge of a
basin, sink or tub, fa-
stening the duct sup-
plied to the tap (see
figure). The free end
of the hose should
not be underwater.
! We advise against the use of hose extensions;
if it is absolutely necessary, the extension must
have the same diameter as the original hose
and must not exceed 150 cm in length.
Electrical connections
Before plugging the appliance into the electri-
city socket, make sure that:
• thesocketisearthedandcomplieswithall
applicable laws;
• thesocketisabletowithstandthemaximum
power load of the appliance as indicated in the
Technical data table (see opposite);
• thepowersupplyvoltagefallswithintheva-
lues indicated in the Technical data table (see
opposite);
• thesocketiscompatiblewiththeplugofthe
washing machine. If this is not the case, repla-
ce the socket or the plug.
! The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to
rain, storms and other weather conditions.
! When the washing machine has been instal-
led, the electricity socket must remain within
easy reach.
65 - 100 cm
! Do not use extension cords or multiple sockets.
! The cable should not be bent or compressed.
! The power supply cable must only be repla-
ced by authorised technicians.
Warning! The company shall not be held re-
sponsible in the event that these standards are
not observed.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a wash
cycle with detergent and no laundry, using the
wash cycle “Auto Clean” (see “Cleaning the
washing machine”).
Technical data
Model
XWA 61052
Dimensions
width 59.5 cm
height 85 cm
depth 54 cm
Capacity
from 1 to 6 kg
Electrical
connections
please refer to the technical
data plate fixed to the ma-
chine
Water
connections
maximum pressure
1 MPa (10 bar)
minimum pressure
0.05 MPa (0.5 bar)
drum capacity 52 litres
Spin speed
up to 1000 rotations per minute
Test wash
cycles in
accordan-
ce with
directives
1061/2010
and
1015/2010.
Programme 8:
Eco Cotton 60°.
Programme 8:
Eco Cotton 40°.
This appliance conforms to
the following EC Directives:
- 2004/108/EC (Electroma-
gnetic Compatibility)
- 2006/95/EC (Low Voltage)
- 2012/19/EU (WEEE)
4
GB
Care and maintenance
Cleaning the pump
The washing machine is fitted with a self-
cleaning pump which does not require any
maintenance. Sometimes, small items (such
as coins or buttons) may fall into the protective
pre-chamber at the base of the pump.
! Make sure the wash cycle has finished and
unplug the appliance.
To access the pre-chamber:
1. Take off the cover
panel on the front of
the machine by first
pressing it in the cen-
tre and then pushing
downwards on both
sides until you can re-
move it (see figures).
2. Unscrew the lid
by rotating it anti-
clockwise (see figu-
re): a little water may
trickle out. This is
perfectly normal.
3. Clean the inside thoroughly.
4. Screw the lid back on.
5. Reposition the panel, making sure the hooks
are securely in place before you push it onto
the appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If
there are any cracks, it should be replaced
immediately: during the wash cycles, water
pressure is very strong and a cracked hose
could easily split open.
! Never use second-hand hoses.
Cutting off the water and electricity
supplies
•Turnoffthewatertapaftereverywashcycle.
This will limit wear on the hydraulic system inside
the washing machine and help to prevent leaks.
•Unplugthewashingmachinewhencleaningit
and during all maintenance work.
Cleaning the washing machine
•Theouterpartsandrubbercomponents
of the appliance can be cleaned using a soft
cloth soaked in lukewarm soapy water. Do not
use solvents or abrasives.
•Thewashingmachinehasa“AutoClean”
programme for its internal parts that must be
run with no load in the drum.
For maximum performance you may want
to use either the detergent (i.e. a quantity
10% the quantity specified for lightly-soiled
garments) or special additives to clean the
washing machine. We recommend running a
cleaning programme every 40 wash cycles.
To start the programme press buttons A and
B simultaneously for 5 seconds (see figure).
The programme will start automatically and
will last approximately 70 minutes. To stop the
cycle press the START/PAUSE button.
Cleaning the detergent dispenser
drawer
To remove the drawer,
press lever (1) and pull
the drawer outwards (2)
(see figure).
Wash it under running
water; this procedure
should be repeated fre-
quently.
Caring for the door and drum of your
appliance
•Alwaysleavetheportholedoorajarinorderto
prevent unpleasant odours from forming.
2
1
1
2
3
A
B
GB
5
Precautions and tips
! This washing machine was designed and constructed in
accordance with international safety regulations. The fol-
lowing information is provided for safety reasons and must
therefore be read carefully.
General safety
• Thisappliancewasdesignedfordomesticuseonly.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• Thewashingmachinemustonlybeusedbyadults,inaccor-
dance with the instructions provided in this manual.
• Donottouchthemachinewhenbarefootorwithwetor
damp hands or feet.
• Donotpullonthepowersupplycablewhenunplugging
the appliance from the electricity socket. Hold the plug
and pull.
• Donotopenthedetergentdispenserdrawerwhilethe
machine is in operation.
• Donottouchthedrainedwaterasitmayreachextreme-
ly high temperatures.
• Neverforcetheportholedoor.Thiscoulddamagethesafety
lock mechanism designed to prevent accidental opening.
• Iftheappliancebreaksdown,donotunderanycircum-
stances access the internal mechanisms in an attempt
to repair it yourself.
• Alwayskeepchildrenwellawayfromtheappliancewhile
it is operating.
• Thedoorcanbecomequitehotduringthewashcycle.
• Iftheappliancehastobemoved,workinagroupoftwo
or three people and handle it with the utmost care. Never
try to do this alone, because the appliance is very heavy.
• Beforeloadinglaundryintothewashingmachine,make
sure the drum is empty.
Load balancing system
Before every spin cycle, to avoid excessive vibrations and
to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the
washing rotation speed. If, after several attempts, the load is
not balanced correctly, the machine spins at a reduced spin
speed. If the load is excessively unbalanced, the washing ma-
chine performs the distribution process instead of spinning.
To encourage improved load distribution and balance, we
recommend small and large garments are mixed in the load.
Disposal
• Disposingofthepackagingmaterials:observelocal
regulations so that the packaging may be re-used.
• TheEuropeanDirective2012/19/EUonWaste
Electrical and Electronic Equipment, requires that
old household electrical appliances must not be
disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected
separately in order to optimise the recovery and
recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the
product reminds you of your obligation, that when
you dispose of the appliance it must be separately
collected.
Consumers should contact their local authority or
retailer for information concerning the correct
disposal of their old appliance.
6
GB
Detergent dispenser drawer: used to dispense
detergents and washing additives (see “Detergents and
laundry”).
ON/OFF button: switches the washing machine on and off.
PUSH & WASH button: (see “Wash cycles”).
WASH CYCLE knob: programmes the wash cycles. Du-
ring the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.
TEMPERATURE button: sets the temperature or the cold
wash cycle (see “Personalisation”).
SPIN button: sets the spin speed or exclude the spin cycle
completely (see “Personalisation”).
DELAY TIMER button: delays the start of the wash cycle
by up to 9 hours.
Press the button repeatedly until the indicator light corre-
sponding to the desired delay time turns on.
When the button is pressed for the fourth time, the option
will be deactivated.
N.B.: once the START/PAUSE button has been pressed,
the delay time can only be modified by decreasing it until
the set programme is launched.
! This option is available on all programmes.
WASH CYCLE PROGRESS
indicator light
s: used to
monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is in
progress.
DOOR LOCKED indicator light: indicates whether the
door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tem-
porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash orange,
while the indicator light for the current wash cycle phase
will remain lit in a fixed manner. If the DOOR LOCKED
indicator light is switched off, the door may be opened
(wait approximately 3 minutes).
To start the wash cycle from the point at which it was inter-
rupted, press this button again.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
Description of the washing
machine and starting a wash cycle
Control panel
WASH CYCLE PROGRESS
indicator lights
DOOR
LOCKED
indicator light
START/PAUSE
button with indicator
light
Detergent dispenser drawer
ON/OFF
button
WASH CYCLE
knob
DELAY TIMER
button
TEMPERATURE
button
SPIN
button
FUNCTION
buttons with
indicator lights
PUSH & WASH
button
GB
7
Indicator lights
The indicator lights provide important information.
This is what they can tell you:
Delayed start
If the DELAY TIMER function has been activated (see “Per-
sonalisation”), after the wash cycle has been started the
indicator light corresponding to the selected delay period
will begin to flash:
As time passes, the remaining delay will be displayed and
the corresponding indicator light will flash:
The set programme will start once the selected time delay
has expired.
Wash cycle phase indicator lights
Once the desired wash cycle has been selected and has be-
gun, the indicator lights switch on one by one to indicate which
phase of the cycle is currently in progress.
Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator
light will illuminate.
If the selected function is not compatible with the program-
med wash cycle, the corresponding indicator light will flash
and the function will not be activated.
If the selected option is not compatible with another
previously selected option, the indicator light will flash
accompanied by a buzzer (3 beeps), and only the latter
option will be activated; the indicator light corresponding to
the activated option will turn on
Door locked indicator light
When the indicator light is on, the porthole door is locked
to prevent it from being opened; make sure the indicator
light is off before opening the door (wait approximately 3
minutes).
To open the door during a running wash cycle, press the
START/PAUSE button; the door may be opened once the
DOOR LOCKED indicator light turns off.
Starting a wash cycle
Rapid programming
1. LOAD THE LAUNDRY. Open the porthole door.
Load the laundry, making sure you do not exceed
the maximum load value indicated in the table of
programmes and wash cycles on the following page.
2. ADD THE DETERGENT. Pull out the detergent
dispenser drawer and pour the detergent into the
relevant compartments as described in “Detergents and
laundry”.
3. CLOSE THE DOOR.
4. Press the “PUSH & WASH” button to start the wash
programme.
Traditional programming
1. Turn the washing machine on by pressing the ON/OFF
button. All the indicator lights will turn on for a few secon-
ds, then only the indicator lights relative to the selected
programme settings will remain lit and the START/PAUSE
indicator light will flash.
2. Load the laundry and close the door.
3. Set the WASH CYCLE knob to the desired programme.
4. Set the washing temperature (see “Personalisation”).
5. Set the spin speed (see “Personalisation”).
6. Measure out the detergent and washing additives (see
“Detergents and laundry”).
7. Select the desired functions.
8. Start the wash cycle by pressing the START/PAUSE
button and the corresponding indicator light will remain lit
in a fixed manner in green. To cancel the set wash cycle,
pause the machine by pressing the START/PAUSE button
and select a new cycle.
9. At the end of the wash cycle the END indicator light
will switch on. The door can be opened once the DOOR
LOCK indicator light turns off (wait approximately 3 mi-
nutes). Take out your laundry and leave the appliance door
ajar to make sure the drum dries completely. Switch the
washing machine off by pressing the ON/OFF button.
Wash
Rinse
Spin
Drain
End of wash cycle
END
8
GB
Wash cycles
Table of wash cycles
Push & Wash
This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF
button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the
Push & Wash function will be deactivated). To start the Push & Wash cycle press and hold the relative button for 2 seconds.
The lit indicator light indicates that the cycle has started. This wash cycle is ideal for cotton or synthetic fabrics, as it washes
at a temperature of 30° and a maximum spin speed of 800 rpm. Maximum load 3,5 kg. (Cycle duration 50’).
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the door.
2. Pour the detergent and additives.
3. Start the programme by pressing and holding the Push & Wash button for 2 seconds. The relative indicator light turns
green and the door will lock (the DOOR LOCKED symbol turns on).
N.B.: starting the wash cycle through the Push & Wash button activates an automatic non-customisable cycle
recommended for cotton and synthetic fabrics. This programme does not allow for setting any additional options.
To open the door while an automatic cycle is under way, press the START/PAUSE button; if the DOOR LOCKED symbol
is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at
which it was interrupted.
4. Once the programme is finished, the END indicator light turns on.
* If you select programme and exclude the spin cycle, the machine will drain only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 8 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 8 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 8 with a temperature of 40°C.
3) Synthetic program along: set wash cycle 10 with a temperature of 40°C.
Wash cycles
Description of the wash cycle
Max.
temp.
C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle duration
Prewash
Wash
Fabric
softener
Bleach
Special
1
Sport
30° 600 -
- 3,5 - - - 55’
2
Dark
30° 800 -
- 4 - - - 70’
3
Anti-odour (Cotton)
60° 1000 -
- 3,5 - - - 110’
3
Anti-odour (Synthetic)
40° 1000 -
- 3,5 - - - 100’
4
Delicate
30° 0 -
- 1 - - - 80’
5
Wool: for wool, cashmere, etc. 40° 800 -
- 1,5 - - - 70’
6
Duvet: for down-stuffed garments. 30° 1000 -
- 2 - - - 110’
Standard
7
Cottons with Pre-wash: extremely soiled whites. 90° 1000
- 6 - - - 180’
8
Eco Cotton 60°C (1): heavily soiled whites and resistant colours. 60° 1000 -
- 6 62 1,04 50 185’
8
Eco Cotton 40°C (2): lightly soiled whites and delicate colours. 40° 1000 -
- 6 62 0,84 85 145’
9
Cotton: lightly soiled whites and delicate colours.
40°
(Max. 9)
1000 -
- 6 - - - 115’
10
Synthetic: heavily soiled resistant colours. 60° 1000 -
- 3,5 46 0,87 53 115’
10
Synthetic (3): lightly soiled resistant colours. 40° 1000 -
- 3,5 - - - 105’
11
Coloured
40° 1000 -
- 6 - - - 100’
Eco & Rapid
12
Cotton 20°C: lightly soiled whites and delicate colours. 20° 1000 -
- 6 - - - 170’
13
20’ Refresh
20° 800 -
- 1,5 - - - 20’
14
Rapid 60’
60° 1000 -
- 6 - - - 60’
Partials
Rinse/Bleach - 1000 - -
6 - - - 50’
Spin + Drain - 1000 - - - - 6 - - - 10’
Drain only *
-
- - - - 6 - - - 3’
GB
9
Setting the temperature
Press the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from
selecting a temperature which is higher than the maximum value set for each wash cycle.
! Exception: if the 9 programme is selected, the temperature can be increased up to a value of 90°C.
Setting the spin speed
Press the SPIN SPEED button to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1000 rpm
Synthetics 1000 rpm
Wool 800 rpm
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol .
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and
the function will not be activated.
- If the selected option is not compatible with another previously selected option, the indicator light will flash accompanied
by a buzzer (3 beeps), and only the latter option will be activated; the indicator light corresponding to the activated option
will turn on.
Sport
Thisoptionallowsforselectingthemostsuitableprogrammeforanytypeofsportsclothing,andisdesignedtoremovedirt
while optimally preserving the technical features of the garments. The various Sport option levels offer the following wash
cycles:
- Sport Shoes, a cycle designed to safely wash up to 2 pairs of sports shoes simultaneously.
- Gym Kit, a cycle designed to simultaneously wash any type of sports clothing together with gym towels.
- Technical Wear, designed for specifically washing waterproof garments or clothing with special technical fibres like
Gore-Tex, so as to optimise washing performance while preserving their technical properties over time. Do not use fabric
softeners for garments with technical fibres.
Fast Forward
During a wash programme and under certain conditions, pressing this button allows for ending the wash programme after
only 20’ if necessary, by performing a brief rinse cycle followed by a spin cycle at maximum 800 rpm or lower, if reduced
manually during the programme customisation phase. In this case, washing and rinsing performance will be reduced. After
pressing the button, the relative indicator light turns on together with the indicator light of the rinse phase. If the selected
temperature is equal to 40° and/or the button is pressed during the initial phase of the programme, the “Fast Forward” option
lasts longer so that the detergent can dissolve properly and avoid damaging the fabrics. In this case, the rinse phase indica-
tor light flashes while the wash indicator light remains fixed until the necessary activation conditions are fulfilled. If less than
20’ remain of the wash programme, the option will be disabled.
Easy iron
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of the drum, while the EASY IRON and START/PAUSE indicator
lights will flash and the END led will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or the
EASY IRON button.
Extra Rinse
By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Personalisation
10
GB
Detergents and laundry
Detergent dispenser drawer
Successful washing results also depend on the correct dose of
detergent: adding too much detergent will not necessarily result
in a more efficient wash, and may in fact cause build up on the in-
side of your appliance and contribute to environmental pollution.
! Do not use hand washing detergents because these create
too much foam.
! Use powder detergent for white cotton garments, for pre-
washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
Open the detergent dispenser
drawer and pour in the detergent
or washing additive, as follows.
Compartment 1: Pre-wash
detergent (powder)
Before pouring in the detergent,
make sure that extra compart-
ment 4 has been removed.
Compartment 2: Washing
detergent (powder or liquid)
If liquid detergent is used, it is recommended that the removable
plastic partition A (supplied) be used for proper dosage. If powder
detergent is used, place the partition into slot B.
Compartment 3: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “max” level indicated
on the central pin.
Extra compartment 4: Bleach
Bleach cycle
Insert the additional compartment 4 (provided) into compartment
1. In pouring the bleach do not exceed the maxlevel indicated
on the central pin.
Perform bleaching by pouring the bleach into additional com-
partment 4 and set the programme .
! Traditional bleach should be used on resistant white fabrics, and
delicate bleach for coloured and synthetics fabrics and for wool.
Preparing the laundry
• Dividethelaundryaccordingto:
- the type of fabric/the symbol on the label
- the colours: separate coloured garments from whites.
• Emptyallgarmentpocketsandcheckthebuttons.
• Donotexceedthevalueslistedinthe “Table of wash cycles”,
which refer to the weight of the laundry when dry.
How much does your laundry weigh?
1 sheet 400-500 g
1 pillow case 150-200 g
1 tablecloth 400-500 g
1 bathrobe 900-1.200 g
1 towel 150-250 g
Garments requiring special care
Sport (programme 1) is designed for washing lightly soiled sports
clothing (tracksuits, shorts, etc.); for best results, we recommend
not exceeding the maximum load indicated in the “Programme
table”. We recommend using liquid detergent, and adding the
amount suitable for a half-load.
Dark: use cycle 2 to wash dark-coloured garments. This pro-
gramme is designed to maintain dark colours over time. We
recommend using a liquid detergent for the best results when
washing dark-coloured garments.
Anti-odour: use programme 3 for washing garments with bad
odours (e.g. smoke, sweat, fried food). The programme is de-
signed to remove bad odours while preserving the fabric fibres.
Synthetics fabrics or mixed loads should be washed at 40°, and
resistant cotton fabrics at 60°.
Delicate: use programme 4 to wash very delicate garments.
It is advisable to turn the garments inside out before washing
them. For best results, use liquid detergent on delicate garments.
For washing Silk items and Curtains, select the relevant cycle 4
and activate the option ; the machine will end the cycle with
the laundry soaked and the indicator light will flash. To drain the
water so that the laundry can be removed, press the START/
PAUSE button or the option .
Wool - Woolmark Apparel Care - Blue:
the wool wash cycle of this machine has been approved by
The Woolmark Company for the washing of wool garments
labelled as “hand wash” provided that the products are
washed according to the instructions on the garment label
and those issued by the manufacturer of this washing machi-
ne (M1126)
In UK, Eire, Hong Kong and India the Woolmark trade mark is a
Certification trade mark.
Duvet: to wash single duvets (the weight of which should not
exceed 2 kg), cushions or clothes padded with goose down
such as puffa jackets, use the special wash cycle number 6.
We recommend that duvets are placed in the drum with their
edges folded inwards (see figure) and that no more than ¾ of
the total volume of the drum is used. To achieve the best results,
we recommend that a liquid detergent is used and placed inside
the detergent dispenser drawer.
Coloured: use this cycle 11 to wash bright coloured clothes.
The programme is designed to maintain bright colours over time.
Cotton 20°C (programme 12) ideal for lightly soiled cotton
loads. The effective performance levels achieved at cold
temperatures, which are comparable to washing at 40°, are
guaranteed by a mechanical action which operates at varying
speed, with repeated and frequent peaks.
20’ Refresh (programme 13) ideal for refreshing and
washing lightly soiled garments in a few minutes. It lasts
just 20 minutes and therefore saves both time and energy.
It can be used to wash different types of fabrics together
(except for wool and silk), with a maximum load of 1.5 kg.
Rapid 60’ (programme 14) is designed to wash moderately
soiled resistant cotton garments at 6 in an hour, with good
washing performance. For synthetic or mixed garments, we
recommend lowering the temperature down to 40°.
GB
11
Troubleshooting
Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure
that the problem cannot be solved easily using the following list.
Problem:
The washing machine does not
switch on.
The wash cycle does not start.
The washing machine does not
take in water (the indicator light for
the first wash cycle stage flashes
rapidly).
The washing machine continuously
takes in and drains water.
The washing machine does not
drain or spin.
The washing machine vibrates a lot
during the spin cycle.
The washing machine leaks.
The Functions indicator lights and the
start/pause indicator light flash, while
one of the phase in progress indicator
lights and the door locked indicator
light will remain lit in a fixed manner.
There is too much foam.
Push & Wash does not activate.
The programme lasts a lot less that
expected.
Possible causes / Solutions:
• Theapplianceisnotpluggedintothesocketfully,orisnotmakingcontact.
• Thereisnopowerinthehouse.
• Thewashingmachinedoorisnotclosedproperly.
• TheON/OFFbuttonhasnotbeenpressed.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thewatertaphasnotbeenopened.
• Adelayedstarthasbeenset.
• Thewaterinlethoseisnotconnectedtothetap.
• Thehoseisbent.
• Thewatertaphasnotbeenopened.
• Thereisnowatersupplyinthehouse.
• Thepressureistoolow.
• TheSTART/PAUSEbuttonhasnotbeenpressed.
• Thedrainhoseisnotfittedataheightbetween65and100cmfromthefloor
(see “Installation”).
• Thefreeendofthehoseisunderwater(see “Installation”).
• Thewalldrainagesystemisnotfittedwithabreatherpipe.
If the problem persists even after these checks, turn off the water tap, switch
the appliance off and contact the Assistance Service. If the dwelling is on one of
the upper floors of a building, there may be problems relating to water drainage,
causing the washing machine to fill with water and drain continuously. Special
anti-draining valves are available in shops and help to avoid this inconvenience.
• Thewashcycledoesnotincludedraining:somewashcyclesrequirethedrain
phase to be started manually.
• Theoption function is enabled: to complete the wash cycle, press the
START/PAUSE button (“Personalisation”).
• Thedrainhoseisbent(see “Installation”).
• Thedrainageductisclogged.
• Thedrumwasnotunlockedcorrectlyduringinstallation(see “Installation”).
• Thewashingmachineisnotlevel(see “Installation”).
Thewashingmachineistrappedbetweencabinetsandwalls(see “Installation”).
• Thewaterinlethoseisnotscrewedonproperly(see “Installation”).
• Thedetergentdispenserdrawerisblocked(forcleaninginstructions,see
“Care and maintenance”).
• Thedrainhoseisnotfixedproperly(see “Installation”).
• Switchoffthemachineandunplugit,waitforapproximately1minuteand
then switch it back on again.
If the problem persists, contact the Technical Assistance Service.
• Thedetergentisnotsuitableformachinewashing(itshoulddisplaythetext
“for washing machines” or “hand and machine wash”, or the like).
• Toomuchdetergentwasused.
• AfterswitchingonthemachineacontrolotherthanPush&Washwasactiva-
ted. Switch the machine off and press the Push & Wash button.
• The“FastForward”optionwasactivated.
12
GB
Service
Before calling for Assistance:
• Check whether you can solve the problem alone (see “Troubleshooting”);
• Restarttheprogrammetocheckwhethertheproblemhasbeensolved;
• Ifthisisnotthecase,contactanauthorisedTechnicalAssistanceCentreusingthetelephonenumberprovidedonthe
guarantee certificate.
! Always request the assistance of authorised technicians.
Have the following information to hand:
• thetypeofproblem;
• theappliancemodel(Mod.);
• theserialnumber(S/N).
This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the
front of the appliance by opening the door.
CZ
13
Česky
Obsah
Instalace, 14-15
Rozbalení a vyrovnání do vodorovné polohy
Připojení k elektrické a k vodovodní síti
První prací cyklus
Technické údaje
Údržba a péče, 16
Uzavření přívodu vody a vypnutí elektrického napájení
Čištění pračky
Čištění dávkovače pracích prostředků
Péče o dvířka a buben
Čištění čerpadla
Kontrola přítokové hadice na vodu
Opatření a rady, 17
Základní bezpečnostní pokyny
Systém automatického vyvážení náplně
Likvidace
Popis pračky a zahájení pracího progra-
mu, 18-19
Ovládací panel
Kontrolky
Zahájení pracího programu
Prací programy, 20
Push & Wash
Tabulka pracích programů
Uživatelská nastavení, 21
Nastavení teploty
Nastavení rychlosti odstřeďování
Funkce
Prací prostředky a prádlo, 22
Dávkovač pracích prostředků
Cyklus bělení
Příprava prádla
Oděvy vyžadující zvláštní péči
Poruchy a způsob jejich odstranění, 23
Servisní služba, 24
CZ
XWA 61052
Návod k použití
PRAČKA
14
CZ
Instalace
Dokonalé vyrovnání do vodorovné polohy
zabezpečí stabilitu zařízení a zamezí vzniku
vibrací a hluku během činnosti. V případě
instalace na podlahovou krytinu nebo na
koberec nastavte nožky tak, aby pod pračkou
zůstal dostatečný volný prostor pro ventilaci.
Připojení k elektrické a k vodovodní síti
Připojení přítokové hadice vody
1. Připojte přívodní
hadici jejím
zašroubováním ke
kohoutku studené
vody s hrdlem se
závitem 3/4” (viz
obrázek).
Před připojením
hadice nechte vodu
odtékat, dokud nebu-
de čirá.
2. Připojte přítokovou
hadici k pračce
prostřednictvím
příslušné přípojky
na vodu, umístěné
vpravo nahoře (viz
obrázek).
3. Dbejte na to, aby hadice nebyla příliš oh-
nutá ani stlačená.
! Tlak v rozvodu vody se musí pohybovat
v rozmezí hodnot uvedených v tabulce s
technickými údaji (viz vedlejší strana).
! V případě, že délka přítokové hadice ne-
bude dostatečná, se obraťte na specializo-
vanou prodejnu nebo na autorizovaný tech-
nický personál.
! Nikdy nepoužívejte již použité hadice.
! Používejte hadice z příslušenství zařízení.
! Je důležité uschovat tento návod tak, aby-
ste jej mohli kdykoli konzultovat. V případě
prodeje, darování nebo přestěhování pračky
se ujistěte, že zůstane uložen v blízkosti
pračky, aby mohl posloužit novému majiteli
při seznámení s její činností a s příslušnými
upozorněními.
! Pozorně si přečtěte uvedené pokyny: Ob-
sahují důležité informace týkající se instala-
ce, použití a bezpečnosti při práci.
Rozbalení a vyrovnání do vodoro-
vné polohy
Rozbalení
1. Rozbalte pračku.
2. Zkontrolujte, zda během přepravy
nedošlo k jejímu poškození. V případě, že
je poškozena, ji nezapojujte a obraťte se na
prodejce.
3. Odstraňte 4
šrouby chránící
před poškozením
během přepravy a
gumovou podložku
s příslušnou
rozpěrkou, které se
nacházejí v zadní
části (viz obrázek).
4. Uzavřete otvory po šroubech plastovými
krytkami z příslušenství.
5. Uschovejte všechny díly: v případě
opětovné přepravy pračky je bude třeba na-
montovat zpět.
! Obaly nejsou hračky pro děti!
Vyrovnání do vodorovné polohy
1. Pračku je třeba umístit na rovnou a pe-
vnou podlahu, aniž by se opírala o stěnu,
nábytek či něco jiného.
2. V případě, že
podlaha není do-
konale vodorovná,
mohou být případné
rozdíly vykompenzo-
vány šroubováním
předních nožek (viz
obrázek); Úhel sklo-
nu, naměřený na pra-
covní ploše, nesmí
přesáhnout 2°.
CZ
15
Připojení vypouštěcí hadice
Připojte vypouštěcí
hadici k odpado-
vému potrubí nebo
k odpadu ve stěně,
který se nachází od
65 do 100 cm nad
zemí; zamezte jejímu
ohybu
nebo ji uchyťte k
okraji umývadla či
vany a připevněte
ji ke kohoutu
prostřednictvím
držáku
z příslušenství (viz
obrázek). Volný
konec vypouštěcí
hadice nesmí zůstat
ponořený do vody.
! Použití prodlužovacích hadic se
nedoporučuje; je-li však nezbytné,
prodlužovací hadice musí mít stejný průměr
jako originální hadice a její délka nesmí
přesáhnout 150 cm.
Připojení k elektrické síti
Před zasunutím zástrčky do zásuvky se
ujistěte, že:
• Je zásuvka uzemněna a že vyhovuje nor-
mám;
je zásuvka schopna snést maximální zátěž
odpovídající jmenovitému příkonu zařízení,
uvedenému v tabulce s technickými údaji
(viz vedle);
hodnota napájecího napětí odpovídá údajům
uvedeným v tabulce s technickými údaji (viz
vedle);
je zásuvka kompatibilní se zástrčkou pračky.
V opačném případě je třeba vyměnit zásuvku
nebo zástrčku.
! Pračka nesmí být umístěna venku – pod
širým nebem, a to ani v případě, že by se
jednalo o místo chráněné před nepřízní
počasí, protože je velmi nebezpečné vystavit
ji působení deště a bouří.
! Po denitivní instalaci pračky musí zásuvka
zůstat snadno přístupná.
! Nepoužívejte prodlužovací kabely a rozvod-
ky.
65 - 100 cm
! Kabel nesmí být ohnutý ani stlačený.
!Výměna kabelu musí být svěřena výhradně
autorizovanému technickému personálu.
Upozornění! Výrobce neponese žádnou
odpovědnost za následky nerespektování
uvedených předpisů.
První prací cyklus
Po instalaci zařízení jeeba ještěedtím,
než je použijete na praní prádla, provést jeden
zkušebcyklus s pracím prostředkem a bez
náplně prádla nastavením pracího programu
„Samočištění(viz “Čištění pračky”).
Technické údaje
Model XWA 61052
Rozmìry
šíøka 59,5 cm
výška 85 cm
hloubka 54 cm
Kapacita od 1 do 6 kg
Napájení
Viz štítek s technickými
údaji, aplikovaný na zarí-
zení.
ipojení k
rozvodu vody
maximální tlak
1 MPa (10 bar)
minimální tlak
0.05 MPa (0.5 bar)
kapacita bubnu 52 litrù
Rychlost
odstøování
a¡z do 1000 otáèek za
minutu
Kontro-
lní pro-
gramy podle
směrnic
1061/2010 a
1015/2010.
program 8;
Eco bavlna 60°.
program 8;
Eco bavlna 40°.
Toto zaøízení odpovídá
následujícím normám
Evropské unie:
- 2004/108/CE (Elektro-
magnetická kompatibilita)
- 2006/95/CE (Nízké
napìtí)
- 2012/19/EU (WEEE)
Hluènost
(dB(A)
re 1 pW)
Praní: 59
Odstøeïování: 77
16
CZ
Údržba a péče
Čištění čerpadla
Součástí pračky je samočisticí čerpadlo,
které nevyžaduje údržbu. Může se však stát,
že se v jeho vstupní části, určené k jeho
ochraně a nacházející se v jeho spodní části,
zachytí drobné předměty (mince, knoíky).
! Ujistěte se, že byl prací cyklus ukončen, a
vytáhněte zástrčku ze zásuvky.
Přístup ke vstupní části čerpadla:
1. Sejměte krycí
panel na přední
straně zařízení
zatlačením na jeho
střed a následným
zatlačením směrem
dolů z obou stran
a poté jej vytáhněte
(viz obrázky).
2. Odšroubujte víko
jeho otáčením proti
směru hodinových
ručiček (viz obrázek):
vytečení malého
množství vody je
zcela běžným jevem;
3. dokonale vyčistěte vnitřek;
4. zašroubujte zpět víko;
5. namontujte zpět panel, přičemž se před
jeho přisunutím k zařízení ujistěte, že
došlo ke správnému zachycení háčků do
příslušných podélných otvorů.
Kontrola přítokové hadice na vodu
Stav přítokové hadice je třeba zkontrolovat
alespoň jednou ročně. Jsou-li na ní viditel-
né praskliny nebo trhliny, je třeba ji vyměnit:
silný tlak působící na hadici během pracího
cyklu by mohl způsobit její náhlé roztržení.
! Nikdy nepoužívejte již použité hadice.
Uzavření přívodu vody a vypnutí
elektrického napájení
Po každém praní uzavřete přívod vody.
Tímto způsobem dochází k omezení
opotřebení pračky a ke snížení nebezpečí
úniku vody.
Před zahájením čištění pračky a během
operací údržby vytáhněte zástrčku
napájecího kabelu z elektrické zásuvky.
Čištění pračky
• Vnější části a části z gumy se mohou
čistit hadrem navlhčeným ve vlažné vodě a
saponátu. Nepoužívejte rozpouštědla ani
abrazivní látky.
Pračka je vybavena programemSamočištění
vniních částí, který musí být proveden bez
jakéhokoli druhu plně v bubnu.
Pra prostředek (množství rovnající se
10% množství doporučeného pro částečně
znečištěné prádlo) nebo specické přídavné
prostředky pro čištění pračky budou moci být
použity jako pomocné prostředky v pracím
programu. Doporučuje se provést samočisticí
program každých 40 cyklů praní.
Pro aktivaci programu stiskněte současně
tlačítka A a B na dobu 5 sekund (viz obrá-
zek). Program bude zahájen automaticky a
bude trvat přibližně 70 minut. Cyklus je možné
ukončit stisknutím tlačítka START/PAUSE.
Čtě dávkovače prach prostředků
Za účelem vytažení
dávkovače stiskněte
páčku (1) a potáhněte
jej směrem ven (2) (viz
obrázek).
Umyjte jej pod prou-
dem vody; tento druh
vyčištění je třeba
provádět pravidelně.
Péče o dvířka a buben
Dvířka ponechte pokaždé pootevřená, aby
se zabránilo tvorbě nepříjemných zápachů.
2
1
A
B
1
2
3
CZ
17
Opatření a rady
! Pračka byla navržena a vyrobena v souladu s platnými
mezinárodními bezpečnostním předpisy. Tato upozornění
jsou uváděna z bezpečnostních důvodů a je třeba si je
pozorně přečíst.
Základní bezpečnostní pokyny
Toto zařízení bylo navrženo výhradně pro použití v
domácnosti.
Toto zařízení mohou používat děti od 8 let a
osoby se sníženými fyzickými, senzorickými
nebo duševními schopnostmi nebo osoby s
nedostatnými zkušenostmi a znalostmi,
když se nacházejí pod náležitým dohledem
nebo když byly náležitě vyškoleny ohledně
bezpečného použití zařízení a uvědomují
si související nebezpečí. Děti si nesmí hrát
se zařízením. Děti nesmí provádět operace
údržby a čištění bez dohledu.
Pračku mohou používat pouze dospělé osoby podle
pokynů uvedených v tomto návodu.
Nedotýkejte se zařízení bosí nebo v případě, že máte
mokré nebo vlhké ruce či nohy.
Nevytahujte zástrčku ze zásuvky tahem za kabel, ale
uchopením za zástrčku.
Neotvírejte dávkovač pracích prostředků během
činnosti zařízení.
Nedotýkejte se odčerpávané vody, protože může mít
velmi vysokou teplotu.
Nepokoušejte se o silotevření dvířek: mohlo by dojít
k poškození bezpečnostního uzávěru, který zabraňuje
náhodnému otevření.
Při výskytu poruchy se v žádném případě
nepokoušejte o opravu vnitřních částí zařízení.
Vždy mějte pod kontrolou děti a zabraňte tomu, aby se
přibližovaly k zařízení během pracího cyklu.
Během pracího cyklu mají dvířka tendenci ohřát se.
V případě potřeby přemísťujte pračku ve dvou nebo
ve třech a věnujte celé operaci maximální pozornost.
Nikdy se nepokoušejte zařízení přemísťovat sami, je
totiž velmi těžké.
Před zahájením vkládání prádla zkontrolujte, zda je
buben prázdný.
Systém automatického vyvážení náplně
Před každým odstřeďováním buben provede otáčení ry-
chlostí lehce převyšující rychlost praní, aby se odstranily
vibrace a aby se náplň rovnoměrně rozložila. V případě,
že po několikanásobných pokusech o vyvážení prádlo
ještě nebude správně vyváženo, zařízení provede
odstřeďování nižší rychlostí, než je přednastavená
rychlost. Při nadměrném nevyvážení pračka pro-
vede namísto odstřeďování vyvážení. Pro dosažení
rovnoměrnějšího rozložení náplně a jejího správného
vyvážení se doporučuje míchat velké a malé kusy prádla.
Likvidace
Likvidace obalových materiálů:
při jejich odstranění postupujte v souladu s místním
předpisy a dbejte na možnou recyklaci.
Evropská směrnice 2012/19/EU o odpadu tvořeném
elektrickými a elektronickými zařízeními nařizuje,
že elektrospotřebiče nesmí být likvidovány v rámci
běžného pevného městského odpadu. Vyřazená
zařízení musí být shromážděna zvlášť za účelem
zvýšení počtu recyklovaných a znovupoužitých
materiálů, z nichž jsou složena, a z důvodu zabránění
možných ublížení na zdraví a škod na životním
prostředí.
Symbolem je přeškrtnutý koš, uvedený na všech
výrobcích s cílem připomenout povinnosti spojené se
separovaným sběrem.
Podrobnější informace týkající se správného způsobu
vyřazení elektrospotřebičů z provozu mohou jejich
držitelé získat tak, že se obrátí na navrženou veřejnou
instituci nebo na prodejce.
18
CZ
Dávkovač pracích prostředků: slouží k dávkování
pracích prostředků a přídavných prostředků (viz „Prací
prostředky a prádlo“).
Tlačítko ON/OFF: slouží k zapnutí a vypnutí pračky.
Tlačítko PUSH & WASH: (vizPrací Programy).
Otočný ovladač PROGRAMŮ: pro nastavení pracích
programů. Během pracího programu zůstane ve stejné
poloze.
FUNKČNÍ tlačítka s kontrolkami: slouží k volbě jed-
notlivých dostupných funkcí. Kontrolka zvolené funkce
zůstane rozsvícena.
Tlačítko TEPLOTY: slouží k nastavení teploty praní nebo
praní ve studené vodě (viz „Uživatelská nastavení“).
Tlačítko ODSTŘEĎOVÁNÍ: slouží k nastavení
odstřeďování nebo k jeho vyloučení (viz „Uživatelská
nastavení“).
Tlačítko ODLOŽENÝ START
Slouží k odložení startu pracího cyklu až o 9 hodin.
Opakovaně stiskněte tlačítko až do rozsvícení kontrolky
označující požadovanou dobu odložení. Při čtvrtém
stisknutí tlačítka dojde ke zrušení jeho volitelné funkce.
POZN: Po stisknutí tlačítka START/PAUSE je možné
změnit hodnotu odložení pouze ve smyslu jejího snížení,
a to až do zahájení nastaveného programu.
! Je aktivní u všech pracích programů.
Kontrolky
PRŮBĚHU PRACÍHO CYKLU: slouží ke kon-
trole průběhu pracího programu.
Rozsvícená
kontrolka
poukazuje na probíhající fázi.
Kontrolka ZABLOKOVANÁ DVÍŘKA: informuje o tom,
zda je možné otevřít dvířka (viz vedlejší strana).
Tlačítko s kontrolkou START/PAUSE: Slouží ke spuštění
nebo dočasnému přerušení programů.
POZN.: Stisknutí tohoto tlačítka slouží k přerušení
probíhajícího praní; příslušná kontrolka bude blikat
oranžovým světlem, zatímco kontrolka probíhající fáze
zůstane rozsvícena stálým světlem. Když bude kontrol-
ka ZABLOKOVANÁ DVÍŘKA zhasnuta, bude možné
otevřít dvířka (vyčkejte přibližně 3 minuty).
Za účelem opětovného zahájení praní z bodu, ve kterém
bylo přerušeno, znovu stiskněte toto tlačítko.
Pohotovostní režim
Za účelem shody s novými předpisy souvisejícími s
energetickou úsporou je tato pračka vybavena systé-
mem automatického vypnutí (přechodu do pohotovost-
ního režimu – standby), který je aktivován po uplynutí
přibližně 30 minut, když se pračka nepoužívá. Krátce
stiskněte tlačítko ON/OFF a vyčkejte na obnovení
činnosti zařízení.
Popis pračky a zahájení
pracího programu
Ovládací panel
Kontrolky PRŮBĚHU
PRACÍHO CYKLU
Kontrolka
ZABLOKOVANÁ
DVÍŘKA
Tlačítko s
kontrolkou
START/PAUSE
Dávkovač pracích prostředků
Tlačítko
ON/OFF
Otočný ovladač
PROGRAMŮ
Tlačítko
TEPLOTY
Tlačítko
ODSTŘEĎOVÁNÍ
FUNKČ
tlačítka s kontrolkami
Tlačítko
ODLOŽENÝ
START
Tlačítko
PUSH & WASH
CZ
19
Kontrolky
Kontrolky jsou zdrojem důležitých informací.
Informují nás o následujících skutečnostech:
Odložený start
Když byla aktivona funkce „Odloženého startu“ (viz
„Uživatelská nastavení“), po zahájení pracího programu
začne blikat příslušná kontrolka zvoleného odložení:
Průběžně bude zobrazován čas zbývající do startu a zo-
brazování bude provázeno blikáním příslušné kontrolky:
Po uplynutí zvolené doby odložení dojde k zahájení
nastaveného programu.
Kontrolka aktuální fáze pracího programu:
Po zvolení a zahájení požadovaného pracího cyklu dojde
k postupnému rozsvícení kontrolek informujících o jeho
průběhu.
Funkční tlačítka a příslušné kontrolky
Po zvolení konktní funkce dojde k rozsvícení příslušné
kontrolky.
V případě, že zvolená funkce není kompatibilní s nasta-
veným pracím programem, příslušná kontrolka začne
blikat a funkce nebude aktivována.
Když zvolená možnost není kompatibilní s jinou předtím
nastavenou možností, tato nekompatibilita bude signali-
zována blikáním kontrolky a akustickým signálem (3 píp-
nutí) a bude aktivována pouze druhá možnost; kontrolka
aktivované možnosti se rozsvítí.
Kontrolka zablokovaných dvířek
Rozsvícení této kontrolky poukazuje na to, že dvířka jsou
zajištěna kvůli zamezení náhodnému otevření; aby se
zabránilo poškození dvířek, před jejich otevřením je třeba
vyčkat, dokud uvedená kontrolka nezhasne (vyčkejte
přibližně 3 minuty). Za účelem otevření dvířek v průběhu
pracího cyklu stiskněte tlačítko START/PAUSE; když
bude kontrolka ZABLOKOVANÁ DVÍŘKA zhasnutá,
bude možné otevřít dvířka.
Zahájení pracího programu
Rychlé nastavení programu
1. NAPLŇTE PRAČKU PRÁDLEM. Otevřete dvířka
s průzorem. Naplňte pračku prádlem a dbejte
přitom, aby nedošlo k překročení množství náplně,
uvedeného v tabulce programů na následující straně.
2. NADÁVKUJTE PRACÍ PROSTŘEDEK. Vytáhněte
dávkovač pracích prostředků a naplňte prací
prostředek do příslušných přihrádek způsobem
vysvětleným v části “Prací prostředky a prádlo”.
3. ZAVŘETE DVÍŘKA.
4. Zahajte prací program stisknutím tlačítka „Push &
Wash“.
Tradiční nastavení programu
1. Zapněte pračku stisknutím tlačítka ON/OFF. Všechny
kontrolky se rozsvítí na několik sekund a poté zůstanou
svítit ty kontrolky, které se týkají nastavení zvoleného
programu, a bude blikat kontrolka START/PAUSE.
2. Naplňte pračku a zavřete dvířka.
Praní
Máchání
Odstřeďování
Odčerpání vody
Ukončení praní
END
3. Otočným ovladačem PROGRAMŮ nastavte
požadovaný prací program.
4. Nastavte teplotu praní (viz „Uživatelská nastavení“).
5. Nastavte rychlost odstřeďování (viz „Uživatelská
nastavení“).
6. Nadávkujte prací prostředek a přídavné prostředky
(viz „Prací prostředky a prádlo“).
7. Zvolte požadované funkce.
8. Zahajte prací program stisknutím tlačítka START/
PAUSE a příslušná kontrolka zůstane rozsvícena stálým
světlem zeleným barvy. Zrušení nastaveného pracího
cyklu se provádí přerušením činnosti zařízení stisknutím
tlačítka START/PATA a volbou nového cyklu.
9. Po ukončení pracího programu se rozsvítí kontrolka
. Po zhasnutí kontrolky ZABLOKOVA DVÍŘKA
bude možné otevřít dvířka (vyčkejte přibližně 3 minuty).
Vytáhněte prádlo a nechte dvířka pootevřená, aby bylo
umožněno vysušení bubnu. Vypněte pračku stisknutím
tlačítka ON/OFF.
20
CZ
Prací programy
Tabulka pracích programů
1) Kontrolní program podle normy 1061/2010: nastavte program 8 s teplotou 60°C.
Tento cyklus je vhodný pro praní běžně znečištěné bavlny a jedná se o nejúčinnější cyklus z hlediska kombinované spotřeby energie a vody určený pro prádlo, které lze prát při teplotě do
60 °C. Skutečná teplota praní se může lišit od uvedené.
2) Kontrolní program podle normy 1061/2010: nastavte program 8 s teplotou 40°C.
Tento cyklus je vhodný pro praní běžně znečištěné bavlny a jedná se o nejúčinnější cyklus z hlediska kombinované spotřeby energie a vody určený pro prádlo, které lze prát při teplotě do
40 °C. Skutečná teplota praní se může lišit od uvedené.
Pro všechny Test Institutes:
2) Dlouhý program pro praní bavlny: nastavte program 8 s teplotou 40°C.
3) Dlouhý program pro syntetiku: nastavte program 10 s teplotou 40°C.
Push & Wash
Tato funkce umožňuje zahájit prací cyklus i při vypnutém zařízení, aniž by bylo třeba nejdříve stisknout tlačítko
ON/OFF nebo následně, při zapnutí zařízení, bez použijakéhokoli dalšího tlačítka a/nebo otočného ovladače (v opačném
případě bude program Push & Wash zrušen). Za účelem zahájení cyklu Push & Wash držte stisknuté tlačítko po dobu 2
sekund. Rozsvícená kontrolka poukazuje na to, že cyklus byl zahájen. Tento prací cyklus je ideálpro bavlněné a synte-
tické prádlo s teplotou 30°C a maximální rychlostí odstřeďování 800 otáček za minutu. Max. náplň 3,5 kg. (Doba trvání
cyklu 50’).
Správný postup
1. Naložte do pračky prádlo (bavlněné a/nebo syntetické) a zavřete dvířka.
2. Nadávkujte prací prostředek a přídavné prostředky.
3. Zahajte program stisknutím tlačítka Push & Wash na dobu 2 sekund. Příslušná kontrolka se rozsvítí stálým zeleným
světlem a dojde k zablokování dvířek (symbol dvířek zůstane rozsvícený).
POZN.: Zahájení praní tlačítkem Push & Wash aktivuje automatický cyklus doporučený pro bavlněné a syntetické prádlo,
který nelze dále uživatelsky přizpůsobovat. Tento program neumožňuje nastavení dalších možností.
Za účelem otevření dvířek v průběhu automatického cyklu stiskněte tlačítko START/PAUSE; když je symbol zabloko-
vaných dvířek zhasnutý, bude možné otevřít dvířka. Opětovným stisknutím tlačítka START/PAUSE znovu uveďte do
činnosti prací program z bodu, ve kterém byl přerušen.
4. Po skončení pracího programu se rozsvítí kontrolka END.
Doba trvání cyklu uvedena displeji nebo v vodu představuje odhad vypočítaný na základě standardních podmínek. Skutečná doba se může měnit v závislosti na četných
faktorech, jako je na. teplota a tlak vody na vstupu, teplota prostředí, mnství pracího prostředku, množství a druh plně, vyvážení nápla zvolené volitelné funkce.
Programy
Popis programu
Max. teplota
C)
Max.
rychlost
(očky za
minutu)
Prací prosedky a
ídav prostředky
Max. náp (kg)
Zbytko vlhkost
(%)
Spotřeba energie
(kWh)
Celkové mnst
vody (lt)
Doba
tr cyklu
edrka
Praní
Aviváž
li
prosedek
Special
1
Sport
30° 600 -
- 3,5 - - - 55’
2
Tmavé prádlo
30° 800 -
- 4 - - - 70’
3
Zabránění zápachu (Bavlna)
60° 1000 -
- 3,5 - - - 110’
3
Zabránění zápachu (Syntetické)
40° 1000 -
- 3,5 - - - 100’
4
Jemné Prádlo
30° 0 -
- 1 - - - 80’
5
Vlna: Pro vlnu, kašmír apod.
40° 800 -
- 1,5 - - - 70’
6
Přikrývky: pro prádlo plněné husím peřím.
30° 1000 -
- 2 - - - 110’
Standard
7
Bavlna s předpírkou: Mimořádně znečištěné bílé prádlo.
90° 1000
- 6 - - - 180’
8
Eco Bavlna 60° (1): Silně znečištěné bílé a barevné prádlo z odolných
tkanin.
60° 1000 -
- 6 62 1,04 50 185’
8
Eco Bavlna 40° (2): Málo znečištěné bílé a barevné choulostivé prádlo.
40° 1000 -
- 6 62 0,84 85 145’
9
Bavlna: Málo znečištěné bílé a barevné choulostivé prádlo.
40°
(Max. 9)
1000 -
- 6 - - - 115’
10
Syntetické: Velmi znečištěné barevné prádlo z odolných tkanin.
60° 1000 -
- 3,5 46 0,87 53 115’
10
Syntetické (3): Málo znečištěné barevné prádlo z odolných tkanin.
40° 1000 -
- 3,5 - - - 105’
11
Barevné
40° 1000 -
- 6 - - - 100’
Eco & Rapid
12
Bavlna 20°: Málo znečištěné bílé a barevné choulostivé prádlo.
20° 1000 -
- 6 - - - 170’
13
20’ Refresh
20° 800 -
- 1,5 - - - 20’
14
Rychlé praní 60’
60° 1000 -
- 6 - - - 60’
Programy Částečné
Máchání/Bělicí prostředek - 1000 - -
6 - - - 50’
Odstřeďování + Odčerpání vody - 1000 - - - - 6 - - - 10’
Samostatné odčerpání vody *
-
- - - - 6 - - - 3’
* V případě volby programu a vyloučení odstřeďování zařízení provede pouze odčerpání vody.
1 / 1

Indesit XWA 61052 W EU Užívateľská príručka

Kategória
Práčky
Typ
Užívateľská príručka