Parkside PASSK 20-Li A1 Návod na používanie

CORDLESS VEHICLE IMPACT WRENCH 20V / AKKU-

KFZ-DREHSCHLAGSCHRAUBER 20 V / VISSEUSE À

CHOCS SANS FIL POUR VOITURE 20 V PASSK 20-Li A1

AKKU-KFZ-

DREHSCHLAGSCHRAUBER 20 V

Originalbetriebsanleitung

AKU RÁZOVÝ UTAHOVÁK

NA KOLA AUTA 20 V

Překlad originálního provozního návodu

AKU RÁZOVÝ UŤAHOVÁK

NA KOLESÁ AUTA 20 V

Preklad originálneho návodu na obsluhu

VISSEUSE À CHOCS SANS

FIL POUR VOITURE 20 V

Traduction des instructions d’origine

ACCU-VOERTUIG-DRAAISLAG-

SCHROEFMACHINE 20 V

Vertaling van de originele gebruiksaanwijzing

WIERTARKO-WKRĘTARKA SAMOCHO-

DOWA, AKUMULATOROWA 20 V

Tłumaczenie oryginalnej instrukcji obsługi

CORDLESS VEHICLE

IMPACT WRENCH 20V

Translation of the original instructions

IAN 368334_2010

BATTERIDREVEN SLAGNØGLE

TIL MOTORKØRETØJ 20 V

Oversættelse af den originale driftsvejledning

ATORNILLADORA DE IMPACTO

RECARGABLE PARA COCHE 20 V

Traducción del manual de instrucciones original

GB Translation of the original instructions Page 1

DE Originalbetriebsanleitung Seite 13

FR Traduction des instructions d’origine Page 25

NL Vertaling van de originele gebruiksaanwijzing Pagina 39

CZ Překlad originálního provozního návodu Strana 51

PL Tłumaczenie oryginalnej instrukcji obsługi Strona 63

SK Preklad originálneho návodu na obsluhu Strana 77

ES Traducción del manual de instrucciones original Página 89

DK Oversættelse af den originale driftsvejledning Side 103

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec

toutes les fonctions de l‘appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas

las funciones del dispositivo.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

A

All Parkside tools and the chargers PLG20A1/PLG 20 A4/PLG 20 C1/PLG20A2/PLG20A3/

PLG 20 C3/PDSLG 20 A1 of the X20V Team series are compatible with the PAP20 A1/

PAP20A2 / PAP 20 A3 /PAP 20 B1/PAP 20 B3 battery pack.

Alle Parkside Geräte und die Lade geräte PLG 20 A1/PLG 20 A4/PLG 20 C1/PLG 20 A2/

PLG20A3/PLG 20 C3/PDSLG 20 A1 der X20V Team Serie sind mit dem Akku-Pack

PAP 20 A1/PAP 20 A2/PAP20 A3/PAP 20 B1/PAP 20 B3 kompatibel.

Tous les outils Parkside et les chargeurs PLG 20 A1/PLG 20 A4/PLG 20 C1/PLG20A2/

PLG 20 A3/PLG 20 C3/PDSLG 20 A1 de la série X20V Team sont compatibles avec la batterie

PAP 20 A1/PAP 20 A2/PAP 20 A3/PAP 20 B1/PAP 20 B3.

Charging times

Ladezeiten

Temps de charge

Charging currents

Ladeströme

Courants de charge

2 Ah

Battery pack

Akku

Batterie

PAP 20 A1/B1

3 Ah

Battery pack

Akku

Batterie

PAP 20 A2

4 Ah

Battery pack

Akku

Batterie

PAP 20 A3/B3

max. 2,4 A

Charger PLG 20 A1/A4/C1

Ladegerät

Chargeur

60 min

2,4 A

90 min

2,4 A

120 min

2,4 A

max. 3,5 A

Charger PLG 20 A2

Ladegerät

Chargeur

45 min

3,5 A

60 min

3,5 A

80 min

3,5 A

max. 4,5 A

Charger PLG 20 A3/C3

Ladegerät

Chargeur

35 min

3,8 A

45 min

4,5 A

60 min

4,5 A

max. 4,5 A

Ladegerät PDSLG 20 A1

Charger

Chargeur

35 min

3,8 A

45 min

4,5 A

60 min

4,5 A

PASSK 20-Li A1 GB│IE │ 1 ■

Contents

Introduction ............................................................2

Intended use ........................................................................2

Features ...........................................................................2

Package contents ....................................................................2

Technical data ......................................................................2

General power tool safety warnings .......................................3

1. Work area safety ..................................................................4

2. Electrical safety ...................................................................4

3. Personal safety ....................................................................4

4. Power tool use and care ............................................................5

5. Battery tool use and care ............................................................5

6. Service ..........................................................................6

Safety instructions speciﬁcally for impact screwdrivers .......................................6

Safety guidelines for battery chargers ....................................................6

Original accessories/auxiliary equipment .................................................6

Before use ............................................................. 7

Charging the battery pack (see ﬁg. A) ....................................................7

Attaching/disconnecting the battery pack to/from the appliance ...............................7

Checking the battery charge level .......................................................7

Use ................................................................... 7

Switching on and oﬀ .................................................................7

Setting/preselecting the rotation speed/tightening torque .....................................7

Changing the direction of rotation .......................................................8

Fitting the socket .....................................................................8

Maintenance and cleaning ................................................8

Disposal ............................................................... 8

Kompernass Handels GmbH warranty .....................................9

Service ............................................................... 10

Importer .............................................................10

Translation of the original Conformity Declaration ...........................11

Ordering a replacement battery .......................................... 12

Telephone ordering .................................................................12

PASSK 20-Li A1

■ 2 │ GB│IE

CORDLESS VEHICLE IMPACT

WRENCH 20V PASSK 20-Li A1

Introduction

Congratulations on the purchase of your new appli-

ance. You have chosen a high-quality product. The

operating instructions are part of this product. They

contain important information about safety, usage

and disposal. Before using the product, please

familiarise yourself with all operating and safety

instructions. Use the product only as described and

for the range of applications speciﬁed. Please also

pass these operating instructions on to any future

owner.

Intended use

This appliance is intended for screwing in and

unscrewing screws as well as for tightening and

loosening nuts. The appliance has a clockwise/

anticlockwise rotation, a 1/2" external square

drive bit holder and an LED working light. The light

on this appliance is intended to illuminate the im-

mediate working area of the appliance. The rotary

impact function of the appliance enables the power

of the motor to be converted into uniform rotary

impacts. The impact mechanism comes into eﬀect

during tightening and loosening.

The appliance is designed for use by adults. Young

people under 16 years of age may only use the

appliance under supervision. The manufacturer ac-

cepts no liability for damages caused by improper

use or incorrect operation of the appliance.

Use this product only as described and for the

areas of applications speciﬁed. The appliance is

not intended for commercial use. Any other usage

or modiﬁcation of the appliance is deemed to be

improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for

damage(s) attributable to misuse.

Features

Tool holder

Rotation direction switch/lock

Belt clip

Battery charge level button

Battery display LED

Battery pack*

Release button for the battery pack

LED work light

Torque preselection button

ON/OFF switch / speed control

Sockets (17/19/21/23 mm)

High-speed charger*

Red charge control LED

Green charge control LED

Package contents

1 cordless vehicle impact wrench 20V

PASSK 20-Li A1

4 sockets (17/19/21/23 mm)

1 belt clip

1 carrying case

1 set of operating instructions

Technical data

Cordless vehicle impact wrench 20V

PASSK 20-Li A1

Rated voltage 20 V (DC)

Idle speed 0–2300 rpm

Rated stroke rate 0–3000 rpm

Max. torque 400 Nm

Torque selectable at 5 levels 100/150/200/

300/400 Nm

Tool holder 1/2"

PASSK 20-Li A1 GB│IE │ 3 ■

Rechargeable battery PAP 20 B3*

Type LITHIUM ION

Rated voltage 20 V (DC)

Capacity 4 Ah/80Wh

Cells 10

NOTE

► Note that the full performance of the unit

can only be achieved if the PAP 20 A3/

PAP20B3 battery is used.

High-speed battery charger PLG 20 C3*

INPUT

Rated voltage 230–240 V ∼,

50 Hz (AC)

Rated power

consumption 120 W

Fuse (internal) 3.15 A

T3.15A

OUTPUT

Rated voltage 21.5 V (DC)

Rated current 4.5 A

Charging time approx. 60 min

Protection class II / (double insulation)

* BATTERY AND CHARGER ARE NOT INCLUDED

Noise emission value

Noise measurement value determined in

accordance with EN 62841. The A-rated noise

level of the power tool is typically:

Sound pressure level LPA = 93.6 dB (A)

Uncertainty K KPA = 3 dB

Sound power level LWA = 104.6 dB (A)

Uncertainty K KWA = 3 dB

Vibration emission value

Total vibration values (vector total of three direc-

tions) determined in accordance with EN 62841:

Tightening screws and nuts of maximum permissible

size ah = 9.425 m/s2

Uncertainty K = 1.5 m/s2

Wear hearing protection!

NOTE

► The vibration emission values and the noise

emission values given in these instructions

have been measured in accordance with

a standardised test procedure and can be

used for comparison of the power tool with

another tool.

► The speciﬁed total vibration values and the

noise emission values can also be used to

make a provisional load estimate.

WARNING!

► Depending on the manner in which the

power tool is being used, and in particular

the kind of workpiece that is being worked,

the vibration and noise emission values can

deviate from the values given in these instruc-

tions during actual use of the power tool.

► Try to keep the load as low as possible.

Measures to reduce the vibration load are,

e.g. wearing gloves and limiting the working

time. Wherein all states of operation must be

included (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

General power tool

safety warnings

WARNING!

►Read all safety warnings, instructions,

illustrations and speciﬁcations provided

with this power tool. Failure to follow all

instructions listed below may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

PASSK 20-Li A1

■ 4 │ GB│IE

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ﬂam-

mable liquids, gases or dust. Power tools cre-

ate sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded)

power tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or ground-

ed surfaces, such as pipes, radiators, ranges

and refrigerators. There is an increased risk

of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entan-

gled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment

such as a dust mask, non-skid safety shoes, hard

hat or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites ac-

cidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become complacent

and ignore tool safety principles. A careless

action can cause severe injury within a fraction

of a second.

PASSK 20-Li A1 GB│IE │ 5 ■

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detach-

able, from the power tool before making any

adjustments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool ac-

cidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamil-

iar with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may aﬀect the power tool’s operation. If

damaged, have the power tool repaired be-

fore use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power

tool for operations diﬀerent from those intended

could result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in unex-

pected situations.

5. Battery tool use and care

a) Recharge only with the charger speciﬁed by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of

ﬁre when used with another battery pack.

b) Use power tools only with speciﬁcally desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and ﬁre.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from

one terminal to another. Shorting the battery

terminals together may cause burns or a ﬁre.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If

contact accidentally occurs, ﬂush with water.

If liquid contacts eyes, additionally seek medi-

cal help. Liquid ejected from the battery may

cause irritation or burns.

e) Do not use a battery pack or tool that is

damaged or modiﬁed. Damaged or modiﬁed

batteries may exhibit unpredictable behaviour

resulting in ﬁre, explosion or risk of injury.

f) Do not expose a battery pack or tool to ﬁre

or excessive temperature. Exposure to ﬁre

or temperature above 130 °C (265°F) may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range speciﬁed in the instruc-

tions. Charging improperly or at temperatures

outside the speciﬁed range may damage the

battery and increase the risk of ﬁre.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the recharge-

able battery from heat, for example from

continuous exposure to sunlight, ﬁre, water

and moisture. There is a risk of explosion.

PASSK 20-Li A1

■ 6 │ GB│IE

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

Safety instructions speciﬁcally for

impact screwdrivers

■Wear hearing protection when impact

screwing. Exposure to loud noise can lead

to hearing loss.

■Secure the workpiece! A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■Hold the power tool ﬁrmly. High torques can

occur for brief periods while tightening and

loosening screws.

■Wait until the power tool has come to a stand-

still before putting it down. The tool can jam,

this leading to loss of control of the power tool.

■Hold the power tool by the insulated gripping

surfaces, when performing an operation where

the screw could come into contact with hidden

wiring. Contact between the screw or attached

tool and a live wire may cause exposed metal

parts of the power tool to become live and give

the operator an electric shock.

Safety guidelines for battery

chargers

■ This appliance may be used by

children aged 8 years and above

and by persons with limited physical,

sensory or mental capabilities or

lack of experience and knowledge,

provided that they are under super-

vision or have been told how to use

the appliance safely and are aware

of the potential risks. Do not allow

children to use the appliance as a

toy. Cleaning and user maintenance

tasks must not be carried out by

children unless they are supervised.

The charger is suitable

for indoor use only.

ATTENTION!

♦ This charger can only charge the follow-

ing batteries:

PAP 20 A1/PAP 20 A2/

PAP20A3/PAP 20 B1/PAP 20 B3.

♦ A current list of battery compatibility can be

found at www.lidl.de/Akku.

WARNING!

■ To avoid potential risks, damaged mains

cables should be replaced by the manufac-

turer, their customer service department or a

similarly qualiﬁed person.

Original accessories/auxiliary

equipment

Use only accessories and auxiliary equipment

speciﬁed in the operating instructions and which

are compatible with the appliance.

WARNING!

■ Do not use any accessories which are not

recommended by PARKSIDE. This can lead to

an electric shock and ﬁre.

PASSK 20-Li A1 GB│IE │ 7 ■

ATTENTION! Hot surface.

There is a risk of burns.

Before use

Charging the battery pack (see ﬁg. A)

CAUTION!

► Always pull out the power plug before you

remove the battery pack from or connect the

battery pack to the charger.

NOTE

► Never charge the battery pack if the ambient

temperature is below 10°C or above 40°C.

If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level

is between 50% and 80%. The storage cli-

mate should be cool and dry and the ambi-

ent temperature should be between 0°C and

50°C.

♦ Connect the battery pack to the high-speed

battery charger (see Fig. A).

♦ Insert the power plug into the socket. The control

LED lights up red.

♦ The green LED indicates that the charging

process is complete and the battery pack

is ready for use.

CAUTION!

♦ If the red control LED ﬂashes, this means

that the battery pack has overheated and

cannot be charged.

♦ If the red and green control LEDs both

ﬂash, this means that the battery pack is

defective.

♦ Push the battery pack back into the appliance.

♦ Switch oﬀ the charger for at least 15 minutes

between successive charging sessions. Also dis-

connect the power plug from the mains power

socket.

Attaching/disconnecting the battery

pack to/from the appliance

Attaching the battery pack

♦ Push the rotation direction switch into the

middle position (lock). Push the battery pack

into the handle until it clicks into place.

Removing the battery pack

♦ Press the release button and remove the

battery pack .

Checking the battery charge level

♦ Press the battery charge level button to

check the status of the battery (see also main

diagram).

The status/remaining charge will be shown on

the battery display LED as follows:

RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

Use

Switching on and oﬀ

Switching on

♦ To start the appliance, press the ON/OFF

switch and keep it pressed in.

The LED working light lights up when the

ON/OFF switch is depressed lightly or fully.

This provides illumination of the work area in

poor lighting conditions.

Switching oﬀ

♦ Release the ON/OFF switch to switch oﬀ the

appliance.

Setting/preselecting the rotation

speed/tightening torque

♦ Press the torque preselection button to select

the required torque in stages.

♦ Press the ON/OFF switch lightly for a low

speed/tightening torque. Increasing the pres-

sure increases the speed/tightening torque.

■ The tightening torque depends on the selected

speed/torque preselection and impact duration.

PASSK 20-Li A1

■ 8 │ GB│IE

NOTE

► However, to tighten lug nuts, the smallest

torque setting must be selected to avoid over

tightening.

► The integrated motor brake ensures rapid

stoppage.

CAUTION!

♦ The tightening torque actually attained must

always be checked with a torque wrench!

Changing the direction of rotation

♦ Change the direction of rotation by pressing

the rotation direction switch towards the left

or right.

Fitting the socket

♦ Push one of the supplied sockets onto the

tool holder .

Maintenance and cleaning

WARNING! RISK OF INJURY! Always

switch oﬀ the appliance and remove

the battery before carrying out any

work on the appliance.

The appliance is maintenance-free.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ Never allow liquids to get into the appliance.

■ Use a soft, dry cloth to clean the housing.

Never use petrol, solvents or cleansers which

can damage plastic.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

environment is cool and dry.

NOTE

► Replacement parts not listed (such as carbon

brushes, switch) can be ordered via our

service hotline.

Disposal

The packaging is made from environ-

mentally friendly material and can be

disposed of at your local recycling

plant.

Do not dispose of power tools in

your normal domestic waste!

European Directive 2012/19/EU

requires that worn-out power tools be

collected separately and recycled in an environ-

mentally compatible manner.

Do not dispose of batteries in

your normal household waste!

Remove the batteries from the appli-

ance before disposal. Defective or

worn-out rechargeable batteries must be recycled

according to Directive 2006/66/EC. Take the

battery pack and/or appliance to a nearby collec-

tion facility.

Please consult your local authorities regarding

suitable disposal of worn out power tools/battery

packs.

Dispose of the packaging in an

environmentally friendly manner.

Note the labelling on the packaging

and separate the packaging material

components for disposal if necessary. The packag-

ing material is labelled with abbreviations (a) and

numbers (b) with the following meanings:

1–7: plastics, 20–22: paper and cardboard,

80–98: composites.

Your local community or municipal

authorities can provide information

on how to dispose of the worn-out

product.

The product is recyclable, subject to

extended producer responsibility and

is collected separately.

PASSK 20-Li A1 GB│IE │ 9 ■

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from

the date of purchase. If this product has any faults,

you, the buyer, have certain statutory rights. Your

statutory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will

be required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion).

This warranty service requires that you present the

defective appliance and the proof of purchase (re-

ceipt) within the three-year warranty period, along

with a brief written description of the fault and of

when it occurred.

If the defect is covered by the warranty, your prod-

uct will either be repaired or replaced by us. The

repair or replacement of a product does not signify

the beginning of a new warranty period.

X 12 V and X 20 V Team Series battery packs

come with a 3-year warranty valid from the date of

purchase.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must

be reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or to fragile

parts which could be considered as consumable

parts such as switches or parts made of glass.

The warranty does not apply if the product has

been damaged, improperly used or improp-

erly maintained. The directions in the operating

instructions for the product regarding proper use

of the product are to be strictly followed. Uses

and actions that are discouraged in the operating

instructions or which are warned against must be

avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall

be deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

PASSK 20-Li A1

■ 10 │ GB│IE

The warranty period does not apply to

■ Normal reduction of the battery capacity

overtime

■ Commercial use of the product

■ Damage to or alteration of the product by the

customer

■ Non-compliance with safety and maintenance

instructions, operating errors

■ Damage caused by natural hazards

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g.IAN12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate

on the product, an engraving on the product,

on the front page of the operating instructions

(below left) or on the sticker on the rear or bot-

tom of the product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

■ You can return a defective product to us free of

charge to the service address that will be pro-

vided to you. Ensure that you enclose the proof

of purchase (till receipt) and information about

what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation

software at www.lidl-service.com.

This QR code will take you directly to the Lidl

service page (www.lidl-service.com) where you

can open your operating instructions by entering

the item number (IAN) 368334_2010.

WARNING!

►Have the power tool repaired by the service

centre or a qualiﬁed electrician and only

using genuine replacement parts. This will

ensure that the safety of the appliance is

maintained.

►Always ensure that the power plug or the

mains cable is replaced only by the manu-

facturer of the appliance or its customer

service. This will ensure that the safety of the

appliance is maintained.

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kom[email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: kom[email protected]

IAN 368334_2010

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

PASSK 20-Li A1 GB│IE │ 11 ■

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards,

normative documents and EC directives:

Machinery Directive

(2006/42/EC)

EC Low Voltage Directive (charger only)

(2014/35/EU)

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)*

* The manufacturer bears full responsibility for compliance with this conformity declaration. The object of the

declaration described above complies with the requirements of the Directive 2011/65/EU of the European Parliament

and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic

appliances.

Applied harmonised standards

EN 62841-1:2015

EN 62841-2-2:2014

EN 60335-1:2012/A2:2019

EN 60335-2-29:2004/A11:2018

EN 62233:2008

EN 55014-1:2017

EN 55014-2:2015

EN IEC 61000-3-2:2019

EN 61000-3-3:2013/A1:2019

EN 50581:20122

Type/appliance designation: Cordless vehicle impact wrench 20V PASSK 20-Li A1

Year of manufacture: 01–2021

Serial number: IAN 368334_2010

Bochum, 18/01/2021

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical changes in the context of further product development.

PASSK 20-Li A1

■ 12 │ GB│IE

Ordering a replacement battery

If you want to order a replacement battery for your appliance, you can do so easily via the

Internet on www.kompernass.com or by telephone.

Due to limited stocks, this item may sell out in a relatively short time.

NOTE

► Online ordering of replacement parts is not possible in all countries. In this case, please contact the

Service hotline.

Telephone ordering

Service Great Britain Tel.: 0800 404 7657

Service Ireland Tel.: 1890 930 034

(0,08 EUR/Min., peak · 0,06 EUR/Min., oﬀ peak)

To ensure that your order is processed swiftly, have the article number of your appliance to hand

(e.g.IAN368334) in case of questions. The article number can be found on the type plate or the

titlepage of these instructions.

PASSK 20-Li A1 DE│AT│CH │ 13 ■

Inhaltsverzeichnis

Einleitung ............................................................. 14

Bestimmungsgemäßer Gebrauch .......................................................14

Ausstattung ........................................................................14

Lieferumfang .......................................................................14

Technische Daten ...................................................................14

Allgemeine Sicherheitshinweise für Elektrowerkzeuge .......................15

1. Arbeitsplatzsicherheit ..............................................................16

2. Elektrische Sicherheit ..............................................................16

3. Sicherheit von Personen ............................................................16

4. Verwendung und Behandlung desElektrowerkzeugs .....................................17

5. Verwendung und Behandlung desAkkuwerkzeugs .......................................17

6. Service .........................................................................18

Gerätespeziﬁsche Sicherheits hinweise für Schlagschrauber ..................................18

Sicherheitshinweise für Ladegeräte .....................................................19

Originalzubehör/-zusatzgeräte ........................................................19

Vor der Inbetriebnahme ................................................19

Akku-Pack laden (siehe Abb. A) ........................................................19

Akku-Pack ins Gerät einsetzen/entnehmen ...............................................20

Akkuzustand prüfen .................................................................20

Inbetriebnahme .......................................................20

Ein-/ausschalten ....................................................................20

Drehzahl/Anziehdrehmoment einstellen/vorwählen ........................................20

Drehrichtung umschalten .............................................................20

Stecknuss aufsetzen .................................................................20

Wartung und Reinigung .................................................20

Entsorgung ...........................................................21

Garantie der Kompernaß Handels GmbH ..................................21

Service ............................................................... 22

Importeur ............................................................22

Original-Konformitätserklärung ..........................................23

Ersatz-Akku Bestellung .................................................24

Telefonische Bestellung ...............................................................24

PASSK 20-Li A1

■ 14 │ DE│AT│CH

AKKU-KFZ-DREH-

SCHLAGSCHRAUBER 20 V

PASSK 20-Li A1

Einleitung

Wir beglückwünschen Sie zum Kauf Ihres neuen

Gerätes. Sie haben sich damit für ein hochwertiges

Produkt entschieden. Die Bedienungsanleitung ist

Teil dieses Produkts. Sie enthält wichtige Hinweise

für Sicherheit, Gebrauch und Entsorgung. Machen

Sie sich vor der Benutzung des Produkts mit allen

Bedien- und Sicherheitshinweisen vertraut. Benut-

zen Sie das Produkt nur wie beschrieben und für

die angegebenen Einsatzbereiche. Händigen Sie

alle Unterlagen bei Weitergabe des Produkts an

Dritte mit aus.

Bestimmungsgemäßer Gebrauch

Das Gerät ist zum Eindrehen und Lösen von

Schrauben sowie zum Anziehen und Lösen von

Muttern vorgesehen. Das Gerät besitzt einen

Rechts-/Linkslauf, eine 1/2“ Außenvierkant Werk-

zeugaufnahme und ein LED-Arbeitslicht. Das Licht

dieses Gerätes ist dazu bestimmt, den direkten

Arbeitsbereich des Gerätes zu beleuchten. Mit der

Drehschlagfunktion des Gerätes wird die Kraft des

Motors in gleichmäßige Drehschläge umgesetzt.

Das Schlagwerk setzt beim Festziehen und beim

Lösen ein.

Das Gerät ist zum Gebrauch durch Erwachsene

bestimmt. Jugendliche über 16 Jahre dürfen das

Gerät nur unter Aufsicht benutzen. Der Hersteller

haftet nicht für Schäden, die durch bestimmungs-

widrigen Gebrauch oder falsche Bedienung ver-

ursacht wurden.

Benutzen Sie das Gerät nur wie beschrieben und

für die angegebenen Einsatzbereiche. Das Gerät

ist nicht für den gewerblichen Einsatz bestimmt.

Jede andere Verwendung oder Veränderung des

Gerätes gilt als nicht bestimmungsgemäß und birgt

erhebliche Unfallgefahren. Für aus bestimmungs-

widriger Verwendung entstandene Schäden über-

nimmt der Hersteller keine Haftung.

Ausstattung

Werkzeugaufnahme

Drehrichtungsumschalter/Sperre

Gürtelclip

Taste Akkuzustand

Akku-Display-LED

Akku-Pack*

Taste zur Entriegelung des Akku-Packs

LED-Arbeitsleuchte

Taste für die Drehmomentvorwahl

EIN-/AUS-Schalter/Drehzahlregulierung

Stecknüsse (17/19/21/23 mm)

Schnell-Ladegerät*

Rote Ladekontroll-LED

Grüne Ladekontroll-LED

Lieferumfang

1 Akku-KFZ-Drehschlagschrauber 20 V

PASSK 20-Li A1

4 Stecknüsse 17/19/21/23 mm

1 Gürtelclip

1 Tragekoﬀer

1 Bedienungsanleitung

Technische Daten

Akku-KFZ-Drehschlagschrauber 20 V

PASSK 20-Li A1

Bemessungsspannung 20 V (Gleichstrom)

Leerlaufdrehzahl 0–2300 min-1

Nennschlagzahl 0–3000 min-1

Max. Drehmoment 400 Nm

Drehmoment in

5 Stufen vorwählbar 100/150/200/

300/400Nm

Werkzeugaufnahme 1/2“

PASSK 20-Li A1 DE│AT│CH │ 15 ■

Akku PAP 20 B3*

Typ LITHIUM-IONEN

Bemessungsspannung 20 V (Gleichstrom)

Kapazität 4 Ah/80Wh

Zellen 10

HINWEIS

► Beachten Sie, dass die volle Leistung des

Gerätes nur bei Verwendung des Akkus

PAP 20 A3/PAP 20 B3 erreicht werden kann.

Akku-Schnellladegerät PLG 20 C3*

EINGANG/Input

Bemessungsspannung 230–240 V ∼, 50 Hz

(Wechselstrom)

Bemessungsaufnahme 120 W

Sicherung (innen) 3,15 A

T3.15A

AUSGANG/Output

Bemessungsspannung 21,5 V (Gleichstrom)

Bemessungsstrom 4,5 A

Ladedauer ca. 60 min

Schutzklasse II / (Doppelisolierung)

* AKKU UND LADEGERÄT SIND NICHT IM LIEFER-

UMFANG ENTHALTEN

Geräuschemissionswert

Messwert für Geräusch ermittelt entsprechend

EN62841. Der A-bewertete Geräuschpegel des

Elektrowerkzeugs beträgt typischerweise:

Schalldruckpegel LPA = 93,6 dB (A)

Unsicherheit K KPA = 3 dB

Schallleistungspegel LWA = 104,6 dB (A)

Unsicherheit K KWA = 3 dB

Schwingungsemissionswert

Schwingungsgesamtwerte (Vektorsumme dreier

Richtungen) ermittelt entsprechend EN 62841:

Anziehen von Schrauben und Muttern maximaler

zulässiger Größe ah = 9,425 m/s2

Unsicherheit K = 1,5 m/s2

Gehörschutz tragen!

HINWEIS

► Die angegebenen Schwingungsgesamtwerte

und die angegebenen Geräuschemissions-

werte sind nach einem genormten Prüfver-

fahren gemessen worden und können zum

Vergleich eines Elektrowerkzeugs mit einem

anderen verwendet werden.

► Die angegebenen Schwingungsgesamtwerte

und die angegebenen Geräuschemissions-

werte können auch zu einer vorläuﬁgen Ein-

schätzung der Belastung verwendet werden.

WARNUNG!

► Die Schwingungs- und Geräuschemissionen

können während der tatsächlichen Benutzung

des Elektrowerkzeugs von den Angabewerten

abweichen, abhängig von der Art und Weise,

in der das Elektrowerkzeug verwendet wird,

insbesondere, welche Art von Werkstück be-

arbeitet wird.

► Versuchen Sie, die Belastung so gering wie

möglich zu halten. Beispielhafte Maßnahmen

zur Verringerung der Vibrationsbelastung sind

das Tragen von Handschuhen beim Gebrauch

des Werkzeugs und die Begrenzung der Ar-

beitszeit. Dabei sind alle Anteile des Betriebs-

zyklus zu berücksichtigen (beispielsweise

Zeiten, in denen das Elektrowerkzeug ab-

geschaltet ist, und solche, in denen es zwar

eingeschaltet ist, aber ohne Belastung läuft).

Allgemeine

Sicherheitshinweise für

Elektrowerkzeuge

WARNUNG!

►Lesen Sie alle Sicherheitshinweise, Anwei-

sungen, Bebilderungen und technischen

Daten, mit denen dieses Elektrowerkzeug

versehen ist. Versäumnisse bei der Einhaltung

der nachfolgenden Anweisungen können

elektrischen Schlag, Brand und/oder schwere

Verletzungen verursachen.

Bewahren Sie alle Sicherheitshinweise und

Anweisungen für die Zukunft auf.

Stránka sa načítava ...

Parkside PASSK 20-Li A1 Návod na používanie

Parkside PASSK 20-Li A1 Návod na používanie

V iných jazykoch

Súvisiace články

Ďalšie dokumenty