Beko WUE6511BS Používateľská príručka

Značka: Beko

Model: WUE6511BS

Kategória: Práčky

Typ: Používateľská príručka

Document Number=

1911861487_EN / 09-09-20.(15:55)

WUE6511BS

EN/CZ/SK

Washing Machine

User’s Manual

Plně automatická pračka

Návod k obsluze

Automatická pračka

Používateľská príručka

This product was manufactured using the latest technology in environmentally friendly conditions.

Washing Machine / User’s Manual 3 / EN

General safety nstructons

This section includes security instructions which may help prevent

the injuries and material damage risks. All kinds of warranties shall

be invalid if these instructions are not observed.

1.1 Lfe and property safety

Never place the product on a carpet-covered floor. Electrcal parts

wll get overheated snce ar cannot crculate from under the devce.

Ths wll cause problems wth your product.

Unplug the product f t s not n use.

Always have the nstallaton and reparng procedures carred out by

the Authorsed Servce Agent. The manufacturer shall not be held

lable for damages that may arse from procedures carred out by

unauthorsed persons.

The water supply and dranng hoses must be securely fastened and

reman undamaged. Otherwse, water leak may occur.

Whle there s stll water nsde the product, never open the loadng

door or remove the flter. Otherwse, rsk of floodng and njury from

hot water wll occur.

Do not force open the locked loadng door. Door can be opened a few

mnutes after the washng cycle ends. In case of forcng the loadng

door to open, the door and the lock mechansm may get damaged.

Use detergents, softeners and supplements sutable for automatc

washng machnes only.

Follow the nstructons on the label of textles and the detergent

package.

1.2 Chldren's safety

Ths product can be used by the chldren who are at the age of 8 and

over and the people whose physcal, sensory or mental sklls are not

fully developed or who do not have necessary requred experence

and knowledge as long as they are supervsed or traned about the

safe use of the product and ts rsks. Chldren should not play wth the

devce. Cleanng and mantenance works should not be performed

by chldren unless they are supervsed by someone. Chldren of less

than 3 years should be kept away unless contnuously supervsed.

Packagng materals may be dangerous for the chldren. Keep

packagng materals n a safe place away from reach of the chldren.

4 / EN Washing Machine / User’s Manual

Electrcal products are dangerous for the chldren. Keep the chldren

away from the product when t s n use. Do not allow them to play

wth the product. Use chld lock to prevent chldren from ntervenng

wth the product.

Do not forget to close the loadng door when leavng the room where

the product s located.

Store all detergents and addtves n a safe place away from the

reach of the chldren by closng the cover of the detergent contaner

or sealng the detergent package.

1.3 Electrcal safety

If the product has a falure, t should not be operated unless t s

repared by the Authorsed Servce Agent. Rsk of electrc shock!

Ths product s desgned to resume operatng n the event of

powerng on after a power nterrupton. If you wsh to cancel the

programme, see "Cancellng the programme" secton.

Plug the product nto a grounded outlet protected by a 16 A fuse. Do

not neglect to have the groundng nstallaton made by a qualfed

electrcan. Our company shall not be lable for any damages that

wll arse when the product s used wthout groundng n accordance

wth the local regulatons.

Do not wash the product by sprayng or pourng water onto t! Rsk of

electrc shock!

Never touch the power cable plug wth wet hands! Do not grab the

power cord to unplug the machne, always unplug t by holdng the

socket wth one hand, and pullng the plug wth the other hand.

Product should be unplugged durng nstallaton, mantenance,

cleanng and repar procedures.

If the power cable s damaged, t must be replaced by the

manufacturer, after sales servce or a smlarly qualfed person

(preferably an electrcan) or someone desgnated by the mporter n

order to avod possble rsks.

1.4 Hot surface safety

While washing the laundry at high

temperatures, the loading door glass

will get hot. Considering this fact, during

washing operation keep the children away

from the loading door of the product to

prevent them touching it.

Washing Machine / User’s Manual 5 / EN

Important instructions for environment

Intended use

• This product has been designed for domestic use. It is not for commercial

purposes or it should not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are

marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or

transportation.

• The service life of your product is 10 years. During this period, original spare

parts will be available to operate the appliance properly.

2.1 Complance wth the WEEE Drectve and Dsposng of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for

waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at

the end of its service life. Used device must be returned to offical collection point for recycling

of electrical and electronic devices. To find these collection systems please contact to your local

authorities or retailer where the product was puchased. Each household performs important

role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps

prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harm-

ful and prohibited materials specified in the Directive.

Package nformaton

Packaging materials of the product are manufactured from recyclable materials in accordance

with our National Environment Regulations. Do not dispose of the packaging materials together

with the domestic or other wastes. Take them to the packaging material collection points des-

ignated by the local authorities.

6 / EN Washing Machine / User’s Manual

Technical specifications

BEKO

MODEL IDENTIFIER (*)

The model information as stored in the product database can be reached by entering following

website and searching for your model identifier (*) foundon energy label: https://eprel.ec.europa.eu/

Supplier name or trademark Beko

Model name WUE6511BS

7000040075

Rated capacity (kg) 6

Maximum spin speed (rpm) 1000

Built-in No

Height (cm) 84

Width (cm) 60

Depth (cm) 44

Single Water inlet / Double Water inlet • / -

• Available

Electrical input (V/Hz) 230 V / 50Hz

Total current (A) 10

Total power (W) 1550

Main model code 9213

Washing Machine / User’s Manual 7 / EN

4.1 Installation

• Apply to the nearest authorised service agent for the installation of your product.

• Preparation of the location and electrical, tap water and waste water installations at the place of

installation is under customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded,

pinched or crushed while pushing the product into its place after installation or cleaning

procedures.

• Make sure that the installation and electrical connections of the product are performed by

authorised service. Manufacturer shall not be held liable for damages that may arise from

procedures carried out by unauthorised persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.

Damaged products cause risks for your safety.

4.1.1 Approprate nstallaton locaton

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other

similar surfaces.

• When the washing machine and dryer are placed on top of each other, their total weight –when

loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient

load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product in the environments where the temperature falls below 0 ºC.

• Leaving a gap at the sides of the machine is suggested to reduce vibration and noise

• On a graduated floor, do not place the product next to the edge or on a platform.

• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use

them on the product.

4.1.2 Removng packagng renforcement (If the product has)

Tilt the machine backwards to remove the packaging

reinforcement. Remove the packaging reinforcement by pulling the

ribbon. Do not make this operation alone by yourself.

4.1.3 Removng the transportaton locks

1 Loosen all bolts with an appropriate wrench until they turn freely.

2 Remove the transport safety bolts by turning them slightly.

3 Insert the plastic covers in the bag containing the user manual to the openings on the rear

panel.

CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the

product will be damaged.

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again

in the future.

Install the transport safety bolts in reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

8 / EN Washing Machine / User’s Manual

4.1.4 Connectng water supply

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have

10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a

pressure reducing valve if water pressure is higher.

CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the

laundry will get damaged or the product will switch to protection mode and will not operate.

CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1 Tighten the nuts of the hose by hand. Never use a tool when

tightening the nuts.

2 When hose connection is completed, check whether there is

leak problems at the connection points by opening the taps

fully. If any leaks occur, turn off the tap and remove the nut.

Retighten the nut carefully after checking the seal. In order to

prevent the water leaks and resultant damages, keep the taps

closed when you do not use the product.

4.1.5 Connectng the dran hose to the dran

• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.

CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge.

Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and

make sure that the machine performs water intake and discharge processes without any problem, fix the drain

hose securely.

40 cm

100 cm

• Connect the drain hose to a minimum height of 40

cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on

the floor level or close to the ground (less than 40 cm

above the ground), water discharge becomes more

difficult and the laundry may come out excessively

wet. Therefore, follow the heights described in the

figure.

• To prevent the waste water to go back into the machine again and to ensure easy drainage, do not

immerse the end of the hose into the waste water or do not insert it into the drain for more than

15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be

pinched between the drain and the machine.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the

hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the

extension hose and the drain hose of the product must be fitted well with an appropriate clamp as

not to come off and leak.

Washing Machine / User’s Manual 9 / EN

4.1.6 Adjustng the feet

CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level

and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its

place and cause crushing and vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrcal connecton

Connect the product to a grounded outlet protected by a 16 A fuse.

The Manufacturer shall not

be liable for any damages that will arise when the product is used without grounding in

accordance with the local regulations.

• Connection must comply with national regulations.

• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements.

Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified

electrician install a 16 Amp fuse.

• The voltage specified in the "Technical specifications" section must be equal to your mains

voltage.

• Do not make connections via extension cables or multi-plugs.

CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.

4.1.8 Intal use

Before starting to use the product make sure that the preparations

are made which are in line with the “Important Safety and

Environment Instructions” and the instructions in the “Installation”

section.

To prepare the product for washing laundry, perform first operation

in Drum Cleaning programme. If this program is not available in your

machine, apply the method which is described in the section 4.4.2.

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not

harmful for the product.

10 / EN Washing Machine / User’s Manual

4.2 Preparation

4.2.1 Sortng the laundry

* Sort laundry according to type of fabric, color, and degree of soiling and allowable water

temperature.

* Always obey the instructions given on the garment tags.

4.2.2 Preparng laundry for washng

• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons

will damage the machine. Remove the metal pieces or wash the clothes by putting them in a

laundry bag or pillow case.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside

out and brush. Such objects may damage the product or cause noise problem.

• Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

• Place curtains in without compressing them. Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend rips and tears.

• Wash “machine washable” or “hand washable” labeled products only with an appropriate

programme.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash

them separately.

• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

• Only use the dyes / color changers and descaling agents which are appropriate to machine wash.

Always follow the instructions on the package.

• Wash trousers and delicate laundry turned inside out.

• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will

reduce pilling.

• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must

be shaken off before placing into the machine. Such dusts and powders on the laundry may build

up on the inner parts of the machine in time and can cause damage.

4.2.3 Tps for energy and water savng

Following information will help you use the product in an ecological and energy/water-efficient

manner.

• Operate the product in the highest load capacity allowed for the programme you have selected,

but do not overload. See, „Programme and consumption table“.

• Observe the temperature instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during

washing process.

• Do not use more detergent than the recommended on the detergent packaging.

4.2.4 Loadng the laundry

1. Open the laundry cover.

2. Put the laundry items into the machine in a loose manner.

3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught

in the door. The loading door is locked while a programme is running. The door can only be opened

a while after the programme comes to an end.

4.2.5 Correct load capacty

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing

programme desired.

Machine automatically adjusts the water amount according to the weight of the laundry put inside it.

WARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's

washing performance will drop. Moreover, noise and vibration problems may occur.

Washing Machine / User’s Manual 11 / EN

4.2.6 Usng detergent and softener

When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the

manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if

available.

The detergent drawer is composed of three

compartments:

– (1) for prewash

– (2) for main wash

– (3) for softener

– ( ) in addition, there is a siphon piece in the

softener compartment.

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• While the washing cycle is in progress, do not leave the detergent dispenser open!

• When using a programme without prewash, do not put any detergent into the prewash

compartment (compartment nr. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment

(compartment nr. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place

the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent container into the main

wash compartment (compartment number “2”).

Choosing the detergent type

Detergent type to be used depends on the washing programme, fabric type and color.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.)

intended solely for delicate clothes and at suggested programmes..

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woolens at suggested programme with special detergent made specifically for woolens

• Please review the program descriptions part for suggested program for different textiles.

• All recommendations about detergents are valid for selectable temperature range of programmes.

CAUTION: Use only detergents manufactured specifically for washing machines.

CAUTION: Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of

soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package

to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental

protection.

• Use lesser detergent for small amounts or lightly soiled clothes.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the softener compartment.

• If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

12 / EN Washing Machine / User’s Manual

Using liquid detergents

If the product contains a liquid detergent cup:

• Put the liquid detergent container into the

compartment no “2”.

• If the liquid detergent lost its fluidity, dilute

it with water before putting it into the

detergent container.

If the product is equipped with a liquid detergent part:

• When you want to use liquid detergent,

press on the point shown to rotate

the apparatus. The part that falls off

will function as a barrier for the liquid

detergent.

• If required, clean the apparatus with water

when it is in place or by removing it.

• If you will use powder detergent, the

apparatus must be secured at top position.

If the product does not contain a liquid detergent cup:

• Do not use liquid detergent for the prewash in a programme with prewash.

• Liquid detergent stains your clothes when used with Delayed Start function. If you are going to

use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your machine does not contain a special liquid

detergent cup, put the gel detergent into the main wash detergent compartment during first

water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before

starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly

into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the

drum before washing.

Using starch

• Put the liquid soda, powder soda or the fabric dye into the softener compartment.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

• Add the bleach at the beginning of the washing cycle by selecting a prewash program. Do not put

detergent in the prewash compartment. As an alternative application, select a programme with

extra rinse and add the bleaching agent while the machine is taking water from the detergent

compartment during first rinsing step.

• Do not use bleaching agent and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes

skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored items.

• When using oxygen-based decolorant, select a program which washes the laundry at a low

temperature.

• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same

consistence, first put detergent in the compartment number “2” in the detergent dispenser and

wait for the machine to flush the detergent when taking in water. While the machine continues

taking in water, add decolorant in the same compartment.

Washing Machine / User’s Manual 13 / EN

4.2.7 Tps for effcent washng

Clothes

Light Colours and

Whites Colours Black/Dark

Colours

Delicates/

Woolens/Silks

(Recommended

temperature range based

on soiling level: 40-90 oC)

(Recommended

temperature range based

on soiling level: cold -40

oC)

(Recommended

temperature range

based on soiling

level: cold -40 oC)

(Recommended

temperature range

based on soiling

level: cold -30 oC)

Soiling Level

Heavily

Soiled

(difficult stains

such as grass,

coffee, fruits

and blood.)

It may be necessary to pre-

treat the stains or perform

prewash. Powder and liquid

detergents recommended

for whites can be used at

dosages recommended

for heavily soiled clothes.

It is recommended to use

powder detergents to

clean clay and soil stains

and the stains that are

sensitive to bleaches.

Powder and liquid

detergents recommended

for colors can be used at

dosages recommended

for heavily soiled clothes.

It is recommended to use

powder detergents to

clean clay and soil stains

and the stains that are

sensitive to bleaches.

Use detergents without

bleach.

Liquid detergents

suitable for

colors and dark

colors can be

used at dosages

recommended

for heavily soiled

clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must

be washed with

special woolen

detergents.

Normally

Soiled

(For example,

stains caused

by body on

collars and

cuffs)

Powder and liquid

detergents recommended

for whites can be used at

dosages recommended

for normally soiled

clothes.

Powder and liquid

detergents recommended

for colors can be used at

dosages recommended

for normally soiled

clothes. Detergents which

do not contain bleach

should be used.

Liquid detergents

suitable for

colors and dark

colors can be

used at dosages

recommended for

normally soiled

clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

Lightly

Soiled

(No visible

stains exist.)

Powder and liquid

detergents recommended

for whites can be used at

dosages recommended

for lightly soiled clothes.

Powder and liquid

detergents recommended

for colors can be used at

dosages recommended

for lightly soiled clothes.

Detergents which do not

contain bleach should

be used.

Liquid detergents

suitable for

colors and dark

colors can be

used at dosages

recommended

for lightly soiled

clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must be

washed with special

woolen detergents.

Rinse Spin+Drain

Prewash Fast Fast+ Extra

Rinse

Extra

Water

Anti

Crease

Pet Hair

Removal

Rinse

Hold

Water

Drain

Soaking

Spin No

Spin

Tap

Water

(Cold)

Steam

Time

Delay

Night

Modu

Temperature Door

Lock

Child

Lock

On/Off Start /

Pause

Soil Level Add

Garment

AutoDose Liquid

Detergent

Selection

Softener

Selection

Wash

Downloaded

Program

Steeping

(End)

Cancel AntiCrease+ Iron

Dry

Cupboard

Dry

Extra

Dry

Timed

Drying

Symbols Table

Drying

14 / EN Washing Machine / User’s Manual

4.3 Operating the product

4.3.1 Control panel

1 - Programme Selection knob (Uppermost

position On / Off)

2 - Spin Speed Indicator LEDs

3 - Child Lock Enabled LED

4 - Door Lock Enabled LED

5 - Delayed Start Indicator LEDs

6 - Programme Follow-up LEDs

7 - Start / Pause Button

8 - Delayed Start Setting Button

9 - Spin Speed Adjustment button

4.3.2 Preparng the machne

1.Make sure that the hoses are connected tightly.

2.Plug in your machine.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

4.3.3 Programme selecton and tps for effcent washng

1.Select the programme suitable for the type, quantity and soiling degree of the laundry in

accordance with the "Programme and consumption table" and the temperature table below.

2.Select the desired programme with the Programme Selection knob.

Washing Machine / User’s Manual 15 / EN

4.3.4 Programme and consumpton table

** : Eco 40-60 ( ) and Cottons 60 °C ( ) are the test programs in accordance with EN 60456:2016 and energy label with

Commission Delegated Regulation (EU) 1061/2010

** : Classic ( ) and Cottons 60 °C ( ) are the test programs in accordance with EN 60456:2016 and energy label with Commission

Delegated Regulation (EU) 1061/2010

***: Eco 40-60 is the test program in accordance with EN 60456:2016/prA:2019 and energy label with Commission Delegated

Regulation (EU) 2019/2014

- : See the programme description for maximum load.

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature,

ambient temperature, type and amount of laundry, spin speed, and changes in electric voltage.

Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours

between the duration shown in the Programme and consumption table and the actual washing duration. Duration will

be automatically updated soon after the washing starts.

Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the

spinning phase, the higher the noise and the lower the remaining moisture content.

Programme

Max. Load (kg)

Programme Duration (min.)

Water Consumption (l)

Energy Consumption (kWh)

Max. Speed

Cottons

90 6 180 83.0 1.950 1000

60** 6 255 46.4 0.773 1000

60** 3 205 35.4 0.580 1000

40 6 180 81.0 0.950 1000

20 6 180 81.0 0.500 1000

Classic 40** 3 205 35.0 0.580 1000

Cottons 60° with Prewash 60 6 200 92.0 1.800 1000

Eco 40-60

40*** 6 197 49.0 1.050 1000

40**,*** 3 155 40.0 0.522 1000

40*** 1.5 155 36.0 0.400 1000

Synthetics 40° 40 2.5 120 66.0 0.750 1000

Synthetics 20° 20 2.5 120 66.0 0.250 1000

Xpress 30° 30 6 28 60.0 0.150 1000

Wool/Hand Wash 40° 40 1.5 65 45.0 0.450 1000

DownWear 40° 40 1.5 105 85.0 0.800 1000

Shirts 40° 40 2.5 80 42.0 0.600 800

Drum Clean 90 - 160 67.0 2.100 600

16 / EN Washing Machine / User’s Manual

4.3.5 Man programmes

Depending on the type of fabric, use the following main programmes.

• Cottons 20-40-90

Use this programme for your cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.).

Your laundry will be washed with vigorous washing action for a longer washing cycle.

• Synthetics

Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). Your laundry

will be washed with a gentle action for a shorter washing cycle when compared to the Cottons

programme. For curtains and tulle, it is recommended to use Synthetics 20˚C or 40˚C programme.

• Woollens / Hand Wash

Use to wash your woolen/delicate laundry. Your laundry will be washed with a very gentle washing

action in order not to damage the clothes.

4.3.6 Addtonal programmes

For special cases, additional programmes are available in the machine.

Additional programmes may differ according to the model of the machine.

• Eco 40-60

The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40

°C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with

the EU ecodesign legislation.

Although it washes longer than all other programmes, it provides high energy and water savings. Actual

water temperature may be different from the stated wash temperature. When you load the machine

with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In

this case, energy and water consumption will decrease more.

• Cottons 60/Classic

Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than

all other programmes, it provides high energy and water savings. Actual water temperature may be

different from the stated wash temperature. When you load the machine with less laundry (e.g. ½

capacity or less), periods in programme stages may automatically get shorter. In this case, energy

and water consumption will decrease more, providing a more economic wash.

• Cottons 60° with Prewash

Use this programme only for heavily soiled cotton clothes. Add detergent into the prewash

compartment.

Consumption Values (EN)

Temperature

Selection (°C)

Spin Speed (rpm)

Capacity (kg)

Program Duration

(hh:mm)

Energy

Consumption(kWh/

cycle)

Water

Consumption(L/

cycle)

Laundry

Temperature (°C)

Remaining

Moisture Content

(%)

Eco 40-60

1000 6 3:17 1.050 49.0 42 62

1000 3 2:35 0.522 40.0 31 62

1000 1.5 2:35 0.400 36.0 27 62

Cottons 20

1000 6 03:00 0.500 81.0 20 62

Cottons 60° with Prewash

1000 6 03:20 1.800 92.0 60 62

Synthetics

1000 2.5 02:00 0.750 66.0 40 45

Xpress 30°

1000 6 00:28 0.150 60.0 23 62

Washing Machine / User’s Manual 17 / EN

• Xpress 30°

Use this programme to wash your lightly soiled cotton clothes in a short time.

• Shirts

This programme is used to wash the shirts made from cotton, synthetic and synthetic blended

fabrics altogether. It reduces wrinkles. Pre-treatment algorithm is executed.

• Apply the pre-treatment chemical on your garments directly or add it together with detergent

when the machine starts to take water from the main washing compartment. Thus the machine will

wash them in a short period of time and expected lifespan of your shirts will extend.

• Down Wear

Use this programme to wash your coats, vest, jackets etc. containing feathers with a "machine-

washable" label on them. Thanks to special spinning profiles, it is ensured that the water reaches the

air gaps amongst the feathers.

• Drum Clean

Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene.

Operate the programme while the machine is completely empty. To obtain better results, put

powder lime-scale remover for washing machines into the detergent compartment no. “2”. When the

programme is over, leave the loading door ajar so that the inside of the machine gets dry.

This is not a washing programme. It is a maintenance programme.

Do not run the programme when there is something in the machine. If you try to do so, the machine detects that

there is load inside and aborts the programme.

4.3.7 Specal programmes

For specific applications, select any of the following programmes.

• Spin+Drain

You can use this function to remove the water on the garment of drain the water in the machine.

Before selecting this programme, select the desired spin speed and press Start / Pause button. First,

the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and

drain the water coming out of them.

If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme

and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start /

Pause button.

Use a lower spin speed for delicate laundries.

4.3.8 Speed selecton

Whenever a new programme is selected, the recommended spin speed of the selected programme is

displayed on the spin speed indicator.

To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases

gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear

on the display. When "No Spin" is selected, the rinse level indicator lights will not turn on.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can

use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from

getting wrinkled when there is no water in the machine. Press Start / Pause button after this process

if you want to drain the water without spinning your laundry. Programme will resume and complete

after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.

The programme will resume. Water is drained, laundry is spun and the programme is completed.

If the programme has not reached the spinning step, you can change the speed without switching the machine

to Pause mode.

18 / EN Washing Machine / User’s Manual

4.3.9 Delayed Start

With the Delayed Start function the startup of the programme may be delayed up to 3, 6 or 9 hours.

Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.

1. Open the loading door, place the laundry and put detergent, etc.

2. Select a washing programme and spin speed.

3. Set the desired time by pressing the Delayed Start button. When the button is pressed once, 3 hours

delayed start is selected. When the same button is pressed again, 6 hours delay is selected, and when

it is pressed for the third time, 9 hours delayed start is selected. If you press the Delayed Start button

once again, Delayed Start function will be canceled.

4. Press Start / Pause button. Previous delayed start time light turns off and next delayed start time

light turns on after every 3 hours.

5. At the end of the countdown, all delayed start lights will turn off and the selected programme will

start.

You can switch the machine to pause mode and add laundry during the delayed start period.

Changing the delayed start period

If you want to change the time during countdown, you will need to cancel the programme and set

the delay time again.

Canceling the Delayed Start function

If you want to cancel the delayed start countdown and start the programme immediately:

1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function will be

canceled. The End/Cancel light flashes continuously.

2. Then, select the programme you want to run again.

3. Press Start / Pause button to start the programme.

4.3.10 Startng the programme

1. Press Start / Pause button to start the programme.

2. Programme follow-up light showing the startup of the programme will turn on.

4.3.11 Chld Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid

any changes in a running programme.

If the Programme Selection knob is rotated when the child lock is active, "Child Lock Enabled LED" will flash 3

times. The Child Lock does not allow any change in the programmes or the selected speed.

Even if another programme is selected with the Programme Selection knob while the Child Lock is active,

previously selected programme will continue running.

When the Child Lock is active and the machine is running, you can switch the machine to Pause mode without

deactivating the Child Lock by turning the Programme Selection knob to On / Off position. When you turn the

Programme Selection knob afterwards, the programme will resume.

To activate the Child Lock:

Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for 3 seconds,

the "Child Lock Enabled LED" will flash. You can release the buttons when the LEDs become

permanently on.

To deactivate the Child Lock:

Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is running.

While you are holding for 3 seconds, the "Child Lock Enabled LED" will flash. You can release the

buttons when the LED turns off completely.

In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off

position when no programme is running, and select another programme.

Child Lock is not deactivated after power failures or when the machine is unplugged.

Washing Machine / User’s Manual 19 / EN

4.3.12 Progress of programme

Progress of a running programme can be followed from the Programme Follow-up indicator. At

the beginning of every programme step, the relevant indicator light will turn on and light of the

completed step will turn off.

You can change the speed settings without stopping the programme flow while the programme is

running. To do this, the change you are going to make must be in a step after the running programme

step. If the change is not compatible, relevant lights will flash for 3 times.

If the machine does not proceed to the spinning step, the Rinse Hold function might be active or the automatic

unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the

machine.

4.3.13 Loadng door lock

There is a locking system on the loading door of the machine that prevents opening of the loading

door in cases when the water level is unsuitable.

Loading door light will start flashing when the machine is switched to Pause mode. The machine

checks the level of the water inside. If the level is suitable, the Loading Door light turns off and the

loading door can be opened within 1-2 minutes.

If the level is unsuitable, the Loading Door light remains on and the loading door cannot be opened.

If you are obliged to open the Loading Door while the Loading Door light is on, you must cancel the

current programme. See. "Cancelling the programme"

4.3.14 Changng the selectons after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to pause mode while a programme is running.

The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to

show that the machine has been switched to the pause mode.

Additionally, when the loading door is openable, the Loading Door light turns off completely.

Changing the speed settings

You can change the speed settings of the programme that is currently running. See "Speed

selection".

If no change is allowed, the relevant light will flash 3 times.

Adding or taking out laundry

You can load/unload laundry when a programme is running if the water level is appropriate to open

the door. To do this:

1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light

of the relevant step during which the machine was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the laundry.

4. Close the Loading Door.

5. Make changes in speed settings, if necessary.

6. Press Start / Pause button to start the machine.

4.3.15 Cancellng the programme

To cancel the programme, turn the Programme Selection knob to select another programme.

Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the

programme has been canceled.

Your machine will end the programme when you turn the Programme Selection knob; however, it

does not drain the water inside. When you select and start a new programme, the newly selected

programme will start depending on the step the previous programme was canceled in. For example,

it may take in additional water or continue to wash with the water inside.

Some programmes may start by discharging the water inside the machine. Depending on the step where the

programme was canceled in, you may have to put detergent and softener again for the programme you have

selected anew.

20 / EN Washing Machine / User’s Manual

4.3.16 End of programme

When the programme ends, "End" LED becomes on at the Programme Follow-up indicator.

1. Wait until the "Door Lock Enabled LED" goes off completely.

2. To switch off the machine, turn the Programme Selection Knob to On/Off position.

3. Take out your laundry and close the loading door. Your machine is ready for the next washing

cycle.

4.3.17 Your machne features "Pause Mode".

After you switch on your machine with the programme selection button (by switching the button

to a different position than the On/Off position), if no programme is started or no other procedure

is performed in the selection step or no action is taken within approx. 2 minutes after the selected

programme ends, your machine will switch to energy saving mode automatically. The brightness of

the indicator lights will decrease. Also, if your product has a display that shows programme time, this

display will be completely turned off. If you turn the Programme Selection knob or touch any button,

lights and display will switch back to previous condition. The selections which you make when exiting

from the energy efficiency may change. Please check the correctness of your selections before

starting the programme. If necessary, please make your settings again. This is not an error.

Stránka sa načítava ...

Beko WUE6511BS Používateľská príručka

Značka: Beko

Model: WUE6511BS

Kategória: Práčky

Typ: Používateľská príručka

Stiahnite si PDF

správa

V iných jazykoch

English: Beko WUE6511BS User manual

Beko WUE6511BS Používateľská príručka

Beko WUE6511BS Používateľská príručka

V iných jazykoch

Súvisiace články

Ďalšie dokumenty